1 GPS VEHICLE TRACKER USER MANUAL-XT008 UPreface Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document. 2 Content 1 Summary ---------------------------------------------------------------------------------- 3 2 Application --------------------------------------------------------------------------------- 3 3 Hardware description 3.1 Wires connection ---------------------------------------------------------------------------- 3 3.2 Interior ------------------------------------------------------------------------------------- ------- 5 3.3 Relays connection ------------------------------------------------------------------------------- 5 4 Specifications ---------------------------------------------------------------------------------------- 6 5 Battery and SIM card installation ------------------------------------------------------------------ 6 6 Startup ------------------------------------------------------------------------------------- ----------- 7 7 Usage --------------------------------------------------------------------------------------------------- -- 7 8 Fortifying mode --------------------------------------------------------------------------------- --------- 8 8.1 Engine started alert ---------------------------------------------- --------- -------- 8 8.2 Movement alert --------------------------------------------------------- --------- -------- 8 8.3 Power cutoff alert --------------------------------------------------------- --------- -------- 8 8.4 ENGINE-OFF Remotely function ---------------------------------------------- --------- -------- 8 8.5 Increase relays function --------------------------------------------------- --------- -------- 8 8.6 More function with using the relays ----------------------------------------- --------- ------- 9 8.7 Checking the working status ---------------------------------- --------- -------- 9 9 Tracking mode -------------------------- --------- -------- ------- 9 9.1 Initialization ---------------------------------- --------- ------- 9 9.2 Change the Password ---------------------------------- --------- ------- 10 9.3 Authorization ---------------------------------- --------- ------ 10 9.4 Auto Track ---------------------------------- --------- ------11 9.5 Geo-fence ---------------------------------- --------- ------- 12 9.6. Tlimit Function ---------------------------------- --------- ------- 12 9.7 Movement alert ---------------------------------- --------- -------- 13 9.8 Overspeed alert ---------------------------------- --------- -------- 14 9.9 IMEI checking ------------------------------ --------- -------- 15 9.10 Time zone setting ----------------------------------------------------------------- 15 9.11 SOS --------------------------------- --------- -------- 15 9.12 SMS LINK --------------------------------- --------- --------------------------------------16 8.13 SMS ONE ----------------------------------------------------------------------------16 3 9.14 Low battery alert --------------------------- --------- ------- 16 9.15 SMS center ------------------------------ --------- -------- 16 9.16 GSM ID --------------------------- --------- ------- 16 9.17 Motion Sensor ---------------------------- --------- -------- 17 9.18 SD Card function ------------------------------ --------- -------- 17 9.19 SIM conversion from A to B ------------------------------ --------- -------- 17 10 Monitoring and Talking Mode ------------------------------ --------- -------- 17 11 GPRS setting ------------------------------------------------------------------- 18 12 MMS picture function ------------------------------------------ 19 13 RFID function --------------------------------------------------------------------- 19 14 Cautions --------------------------------------------------------------------- 19 15 Faults & Solutions --------------------------------------------------------------------- 19 16 Cable connection diagram --------------------------------------------------------------- 19 1 Summary Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle. 2 Applications z Rental vehicle / Fleet management etc z Covert Tracking 3 Hardware Description 3.1 Wires Connection 4 1 SP Connects the round speaker (connection is ready ,only need connect the speaker) 2.SP + Connects the round speaker (connection is ready ,only need connect the speaker) 3. MIC + microphone +(connection is ready) 4. MIC + microphone -(connection is ready) 5. GND SOS GND (connection is ready) 6. SOS SOS +(connection is ready) 7. Oil test (analog input port )connects the black wire for the fuel sensor. Note: Please use our fuel sensor only. 8. ACC (digital input port) connect the ACC (ignition) 9. V + connects relay, connction is ready,conencts the relay,it works. 10. Output (digital output) Connects the extra relays 11. Temperature test (analog input port) connects the middle connector of the round temperature sensor. 12. Cut oil (digital output) connects the relay, connction is reay,conencts it,it works. 13. Out A (digital output) for the extra relay. Connect GSM antenna For upgrade the firmwareConnect GPS antenna SIM B Card slot Working status indicator GPS indicator DC +9-36V GND 1 3 5 7 9 11 13 15 17 19 A B C D 2 4 6 8 10 12 14 16 18 20 E F G H 5 14. Out B (digital output) |RFID [),jj_ 15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 16. IO5 in(digital input port) connects the detective circuit of the switches for the doors and tail in the car. 17. IO4 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car. 18. IO3 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car 19. IO2 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca 20. IO1 in (digital input port) connects the detective circuit of the switches for the doors and tail in the ca Note: Two UART with the connectors of A.B C D; E F G H for 2 purposes. A. Connect the extra camera B. For input/output the data Connects any conenctors ABCD or EFGH optionally, function actived. UART1 (A.GND B.RX C. TX D.+5V) UART 2 (E.GND F.RX G.TX H.+5V) 3.2 Interior 3.3 Relays connection Put SIM card here A(back of Mainboard) Put SD card here Conencts the tracker 6 4 Specs Content Specs. Dimension. 8.2x8.2x2.8cm Weight 195g Network GSM/GPRS Band GSM850/ 900/1800/1900Mhz GPS chip SIRF3 chip GPS sensitivity -159dBm GPS accuracy 5m Time To First Fix Reacquisition 0.1s Cold status 45s Warm status 35s Hot status 1s Power 936V input Battery Chargeable changeable 3.7V 1100mAh Li-ion battery Standby 50hous Storage Temp. -40C to +85C Operation Temp. -20C to +55C Humidity 5%--95% non-condensing 5 Battery and SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, cant be identified for PDU format. Steps: 1.Open the rear cover, insert a SIM card to the simcard slot A. (If using one simcard,do not insert it into simcard slot A since the default simcard is simcard B) 2.Insert the SD card 3.Use a stick to pick up the simcard slot B,insert the simcard. Relays Connect oil routes Connect oil routes SIM card A Use a stick to pick up the simard slot B 7 6 Startup z Put the SIM card and SD card in right places.(Put the B card slot in place,the indicator light will blink quickly after 10 seconds, remove card slot B, tracker stops working) z Connect the power supply of the car (The red indicator inside the tracker is on when conencting the 9-36 V power supply) z It takes 40-60 seconds to get the GPS and GSM signals and begins to work.The red indicator blinks every 1 second,the blue GPS indicator blinks every 3 seconds. z Everything is ready when the blue GPS indicator blinks normally, then you can do the following Settings. 7 |j 7`,|||]||[|j,l}]||])]|||`;|)[[[||]|)j)]ot`yu::od||||]Install SD card Put the SIM card into the slot with the right direction. Insert the simard slot with the sim card 8 jmou`tou::od|l|]jtu'ku::odj|]jtuku::od}[||] 7 Usage The tracker has three working modes: Fortifying mode, Tracking mode and Monitoring mode. Working modes can be changed reciprocally. The default mode is Fortifying mode,sends command tracker+password,gets tracking mode,sends minitor+passwords,get monitoring mode,sends fortify+password,goes back fortifying mode 8 Fortifying Mode Under the fortifying mode, call the tacker to arm or disarm the fortify function.When the forify mdoe is armed,the indicator blinks every 4 seconds and if blinks every 1 second,means the fortify is disarmed.(There is no cooridnates goes back for call when tracker works in fortifying mode) When the fortify is armed,the alerts will be as below: 8.1 Engine Started illegally Alert In fortifying mode, the tracker will start the ACC examine automatically. It will warn up the user when the engine is started. Alert SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F fortify imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 8.2 Movement Alert This function is using for the owner to get an alert when the tracker moves out of a restricted district (500m radius), Response SMS format: lat: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F moved imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 8.3 Power Cutoff Alert In this mode, the tracker will warn up the user automatically when the main power is cut off unwontedly,such as if someone cut the wire connected the car with the device, it will alert Battery with coordinates. Alert SMS format: lat: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F battery imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 9 8.4 ENGINE-OFF Remotely function ( Remark:You can send the below sms after the relay and the related wires conencted) 8.4.1 Send powercar123456 11 tracker disconnects the oil and electricity and cut the engine,car stops slowly and you will get SMS powercar ok. 8.4.2 Sendpowercar123456 00tracker connects the oil and electricity,the engine will be restore,you will get SMS powercar ok. 8.5 More function with using the relays Please send the below commands to control the extra relays. relaya123456 0 control the OC output of wire A, 0 is the output low Voltage level ,1 is the output high voltage level. relayb123456 0 control the OC output of wire B, 0 is the output low Voltage level ,1 is the output high voltage level. Output123456 101 control the OC output of the output wire, 0 is the output low Voltage level ,1 is the output high voltage level.(101 is the variety of the voltage of the relay,high-low-high,the interval is 1 second, it can be 010 also,means low-high-low, the inteval is 1 second as well, can be used for car door open 8.6 External input detection function Thre are 6 detective wires,if you need external input data or signals(such as the information of the door and tail of the car) 15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car.) 16 .IO5 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car) 17.IO4 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car) 18.IO3 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car) 19.IO2 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car) 20.IO1 in (digital input port) connects the detective circuit of the switches for the doors and tail in the car) SMS string is : lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F Trigger6Start imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 SMS alert string is: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F Trigger6Stop imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 Remark:Trigger6Stop is low voltage level, Trigger6Start is high voltage level, 6 is item no. of IO IN, informs you the origin of the alert. 8.7 Checking the working status ( fortify or no fortify ) You can send SMS command fortified123456 to tracker, it will report fortifying or no fortify to you. 10 Out of Fortifying mode SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F no fortify imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 Fortifying mode SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F fortify imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333 9 Tracking Mode 9.1 Initialization Send SMS begin+password to the unit, it will reply begin ok and initialize all the settings. (default password: 123456) 9.2 Change the Password Send SMS password+old password+space+new password to change the password. (default password: 123456) 9.3 Authorization 9.3.1 Send SMS admin+ password+ space+ cell phone numberto set the first authorized number, the other authorized numbers should be set by the first authorized number. TO:13188888888 begin123456 From:13188888888 begin ok TO:13188888888 password123456 888999 From:13188888888 password ok 11 9.3.2 Send SMS noadmin+password+space+authorized number to cancel the authorized number. 9.3.3 When an authorized number sends SMS or dials up the unit, it will reply a SMS as below: Lat: 22.566901 long: 114.051258 speed: 0.00 14/08/09 06.54 F:3.85V,1,Signal:F imei:354776031555474 05 43.5 460 01 2533 720B, Oil=80%,T=40,RFID=3333333 Lat: 22.566901 long: 114.051258== Coordinate 0.00 === speed 14/08/09 06.54== Date&Time F:3.85V == battery power 1 == charging 0 means no charging Signal:F ==== Full GPS signal 0 means weak GPS signal 354776031555474== IMEI 05=number of satellites ( from 3 to 10) 43.5=Altitude 460 = MCC Mobile Country Code 01 == MNC Mobile Network Code 2533= LAC Location area code 720B= Cell ID Oil=80% ,j T=40 jj RFID=3333333 `jj[RFID _ 9.4 Auto-Track This function is using for the user to receive SMS with Geo-info in a certain time. 9.4.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals 12 for 5 times.It will reply as t030s005n OK 9.4.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times. You will receive a reply as t030s***n OK 9.4.3 Send notn+password to delete the auto track . 9.5 Tlimit Function 9.5.1 Send tlimit123456 50 (50 is the restricted distance in meter, minimum is 1m, maximum is 6000m), tracker replies tlimit ok (note: this command should work along with auto tracking command) Once this function is set up, the tracker will only send coordinates if the moving distance is not less than the restricted value in each interval, otherwise, it will not send new coordinates. 9.5.2 Send tlimit123456 0 is to cancel this function, tracker replies tlimit ok. 9.6 Geo-fence Set up a geo-fence for the unit to restrict its movement within a district. The unit will send message to the authorized numbers when it moves out of the district. Notes: This function will be invalid if the unit moves outside the district. You need to re-set it if you want this function again. TO:13188888888 Notn123456 From:13188888888 Notn ok 13 9.6.1 Send SMS stockade+password+space+longitude,latitude; longitude,latitude to the unit to set the restricted district. Remark:The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second latitude&longitude is the coordinate of the bottom right corner. 9.6.2 Send SMS nostockade+password to deactivate this function. This function will be invalid if the unit moves outside the district Response SMS format: stockade!+geo-info. It will alarm one time in each setting. 9.7 Movement Alert TO:13188888888 stockade123456 114.124845e,22.567185n;114.777888e,22.555666n From:13188888888 stockade ok TO:13188888888 nostockade123456 From:13188888888 nostockade ok From:13188888888 'ut:??.bb9?3'ou_:!!1.0!33!:d:0.00?8!!!003:33l:1.3?\,0,S`_uu':lstockade`m`:3980!!0!b?b!01!.1b00!?33?0b Oil=80%,T=40,RFID=3333333 14 This function is using for the owner to get alarm when the tracker moves out of a restricted district. 9.7.1 Set up: Send SMS move+password to the unit to set the movement alert. then the unit will reply move ok! if the setting is successfully. 9.7.2 Cancel:Send SMS nomove+password to deactivate this function This function will be out of effect after the unit moves outside the district. This function will be invalid if the unit moves outside the district Response SMS format: move!+geo-info. It will alarm one time in each setting. TO:13188888888 move123456 From:13188888888 move ok From:13188888888 'ut:??.bb9?3'ou_:!!1.0!33!:d:0.00?8!!!003:33l:1.3?\,0,S`_uu':lmove`m`:3980!!0!b?b!01!.1b00!?33?0b Oil=80%,T=40,RFID=3333333 TO:13188888888 nomove123456 From:13188888888 nomove ok 15 9.8 Overspeed Alert: This function is using for the owner to control the targets speed. 9.8.1 Set up: Send SMS speed+password+space+080 to the unit,such as speed123456 080 9.8.2 Cancel: Send SMS nospeed+password to the unit. Response SMS format: speed+080!+Geo-info (suppose the speed is 80km/h). The tracker will check the speed in 1 minute interval and alarm if it is overspeed. 9.9 IMEI Checking: Send SMS imei+password to the unit to check the IMEI number of the unit. TO:13188888888 speed123456 080 From:13188888888 speed ok TO:13188888888 nospeed123456 From:13188888888 nospeed ok From:13188888888 'ut:??.bb9?3'ou_:!!1.0!33!:d:0.00?8!!!003:33l:1.3?\,0,S`_uu':lspeed`m`:3980!!0!b?b!01!.1b00!?33?0b Oil=80%,T=40,RFID=3333333 TO:13188888888 Imei123456 From:13188888888 imei350001122222222 ok 16 9.10 Time Zone setting Send time zone+password + GMT time ,reply time zone ok. (note: if GMT time is positive, just write the number. If time zone is negative, have to write 1) 9.11 SOS Button Press the SOS for 3 seconds, it will send help me !+ Geo-info to all the authorized numbers in 3 minutes. Alarm SMS format:: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F help me imei:354776036842240 05 130.8 460 01 9523 29062, Oil=80%,T=40,RFID=3333333 9.12 SMS LINK 9.12.1 Send smslinkone+password, The tracker will reply a GOOGLE map link to admin number.The position can be checked directly on smartphone(with GPRS enabled) Formathttp://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36 F:4.22V Signal:F imei:012207000691839 9.12.2 Send smslink123456, it will reply smslink OK . The tracker will send the following SMS format always. http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36 F:4.22V Signal:F imei:012207000691839 9.12.3 Send smstext123456, it will reply smstext OK. The tracker will send normal SMS TO:13188888888 Time zone23456 1 TO:13188888888 Time zone23456 -1 From:13188888888 time zone ok 17 9.13 SMS ONE Send smsone+password.The tracker will reply coordinates by SMS to admin number or by GPRS to server 9.14 Low Battery Alert When the backup battery is less than 3.7 V, it will send low battery alert to admin number 9.15 SMS Center ( or appointed number) 9.15.1 Setup: Send SMS adminsms+password+space+cell phone number to setup the SMS center. The tracker will reply Geo-info & authorized number to sms center number even if the admin numbers call or send command to the tracker 9.15.2 Cancel: Send SMS noadminsms+password to cancel the SMS center. Response SMS format: authorized number+Geo-info 9.16 GSM IDthis function can be add or delect for customization. GSM ID are in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the customers have to ask their GSM operator for data base of the GSM ID. 9.17 Motion Sensor This function is used to protect the vehicel or tracker when it is touched. 9.17.1 Setup: Send shake+password+space+1-10 to the tracker to set up this function.(1-10 means the level of intensity) 9.17.2 Send SMS shake+password+space+1, 1 is the least sensitivity . Have to shake the tracker strongly to get the alert. 9.17.3 Send SMS shake+password+space+10, 10 is the most sensitivity . Have to shake the tracker slightly to get the alert 9.17.4 Cancel: Send SMS shake+password+space+0 to remove this function. 9.18 SD card function A mini SD card can be put in the trackers SD card slot. The GPRS data can be saved in the SD card if GPRS is disconnected. It will send data to the GPRS server again if GPRS is connected again. 9.18.1 Setup: Send SMS sdlog+password+space+1 to activate the sd card-saving function 18 Cancel: Send SMS sdlog+password+space+0 to the tracker to deactivate this function 9.18.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data in the SD card to the GPRS server. Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data in the SD card to the server. 9.19 SIM conversion from A to B 9.19.1 If you are using simcard B,sends a command selectsim123456 A,after 1 minute,simcard A works,and Simcard B stops working.The same thing for after sending selectsim123456 B 9.19.2 When 2 simcards are working simultaneously.Simcard A loses the GSM signal,simcard B will work automatically,the same thing for Simcard B. 9.19.3 Send selectsim123456 A, A card works permanently, send selectsim123456 B,B card works permanently, send selectsim123456,will transform automatically between A card and B card 10 Monitor and Talking Mode 10.1 Send SMS monitor+password, the response from the tracker is monitor ok then you can hear the voice around the tracker after your call. 10.2 Send SMS talk+password,it will reply talk ok, if connects the round speaker,you can have 2 ways communication. (Remark: Send volume+password+60 to adjust the volume,60 is variable, the grades from 0-99,from low to high level,send volume123456 0 for listen in only.) 11 GPRS setting APN(access point name), IP, PORT have to be set up for gprs function. Apn user, apn password have to be set up also if there are. So please contact with the gsm operator for them

11.1 Set GPRS protocols 11.1.1 Set TCP protocols:Send SMS Gprsmode+password+space+0 to set up TCP protocol, tracker will reply GPRSMODE ok (note: TCP is the default mode in the firmware) 11.1.2 Set UDP protocols: Gprsmode+password+space+1 to set up UDP protocol, tracker will reply GPRSMODE ok 11.2 Set IP address and port: 19 Setup: adminip+password+space+IP address+space+port. If setup successfully, the tracker will reply SMS adminip ok Cancel: Send SMS noadminip+123456 11.3 Set APN Setup: Send SMS APN+password+space+B card APN content+ space +A card APN content.If setup successful, the tracker will reply SMS APN ok. (Remark:if use B card only, then no need to set A card APN content) Cancel: The old APN will be invalid automatically when a new APN is set. 11.4 Set APN USER Setup: Send APNUSER+password+space+B card APN user content+ space +A card APN user content, the tracker will reply SMSAPNUSER OK. (Remark:if use B card only, then no need to set A card APN user content) Cancel: The old APN user name will be invalid automatically when a new APN user name is set. 11.5 Set APNs Password Setup: Send APNPASSWD+password+space+B card APN password content+ space +A card APN password content, the tracker will reply SMSAPNPASSWD OK. (Remark:if use B card only, then no need to set A card APN password content) Cancel: The old APN password will be invalid automatically when a new APN password is set. 11.6 GPRS setting The tracker will hang up the calling in gprs mode when an authorized number calls to the tracker, then send gprs data to the server. GPRS Format: serial number, the authorized number, GPRMC data, GPS signal( F is strong L is weak), alarm information, imei , satellite number ,altitude, battery power (F is full,L is weak), charging state( 1 charging ,0 no charging), byte number, checksum, MCC, MNC,LAC, CELL ID Oil=80%,j T=40 jj RFID=3333333 RTID _ For example 100312033421,13145826175,GPRMC,033421.851,A,2234.0209,N,11403.0733,E,1.87,347.73,120310,,,A*62,F,help me, imei:354776036842240,03,73.5,F:4.14V,0,138,46772,460,01,2533,720B Oil=80%,T=40,RFID=3333333 12.MMS ||[| 12.1 |]|,[||].(]:|j||[,]]j) 1G [SD ) 12.2 ,|y|_,||] 9.3.( ]:|_[|]|(][.) 20 12.3 |,SIM[(]| |];:MMSSET123456 cmwap 10.0.0.172 80 mmsc.monternet.com ]CMWAP APN 10.0.0.172 80 IP | mmsc.monternet.com CENTER 12.4 |||||: mms123456 120 5 ]120 [|}[|60,5 ||j);||)999 12 MMS Photograph function setting 12.1 Connect the camera with the tracker (note: must insert a 1GB SD card to the tracker when using the MMS photograph function) 12.2 Set authorization number for the tracker (note: authorization number phone should have MMS function.) 12.3 Set the APN, APN user, APN password for the tracker 12.4 Format: MMSSET+password + Spaces + APN + Spaces + USER + Spaces + PASSWORD 12.5 Auto photographing: mms123456 120 5 (note: 120 means 120 seconds interval, minimum is 60 seconds, 5 means the number of picture) 13.RFID [ 13.1 RFID ,,[|_ 13.1.1 RFID _[||,[||]|[||_|,[_)_|),; 13.1.2 _|||])RFID ,,[-)} 13.2 RFID ,,|j 13.2.1 RFID ,,, RFID j,,,,,)|,,|_,j,}||,][|RFID=_,;;|,}RFID=. |_|)_ 21 13.2.2 RFID |: )]: rfidadd123456 11A156789 }: rfidadd OK |]: rfidadd++|+_ (|_10 ) ]:|})|,(j.(|_)),(j.}||"]. lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F NoSec imei:354776036842240 05 130.8 460 01 9523 29062Oil=80%,T=40,RFID=3333333 13.2.3 RFID ]||: )]: rfiddel123456 11A156789 }: rfiddel OK |]: rfiddel ++|+_ 13.2.4 RFID |[) )]: rfidlist123456 }: 11A156789 22356C88 |]: rfidlist + }`jj|[_ 13.2.5 RFID [; )]: rfid123456 1/0 (1 |;[,0 |[) }: rfid OK |]: rfid ++|+1 ,0 (]:[|;),[;[[,};| RFID ,_|j,}j ACC )|ACC ,,[;,;]|j,},]RFID ,]j^[|.) 13.2.6 RFID ;[[) )]: rfidsec123456 }: rfid on/off |]: rfidsec + 14 Cautions Please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 2. Dont use & store the unit in dusty places. 3. Dont put the unit in overheated or overcooled places. 4. Handle carefully. Dont vibrate or shake it violently. 5. Clear the unit with a piece of dry cloth. Dont clean in chemicals, detergent. 6. Dont paint the unit, this may cause some foreign materials left in between the parts. 7. Dont disassemble or refit the unit. 22 8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers will cause unwanted situation. 9. Dont dismount the antenna randomly, or use other antennas. This may interfere the transmission, and increase the radiation as well. 15 Faults & Solutions Faults Solution Startup Fail Check the SIM and see if it is fully charged or correctly installed. Hangup Fail Check if the unit received GPS signal or not,or if the SIM card there iscalling display or not. Monitor Fail Check if the authorized number is setup or in the coverage of signals. Location report in digits of zeros. Dont use it in the place beyond reach of signals. Place the unit outdoors, especially when starting it up. (Remark: The times of alert returns by tracker can be customized ,it supports GPRS commands and PC commands settings,the comamnds are the same as sms comamnds ) 16 Accessories diagram 16.1 . Fuel sensor diagram Red wire connect s+DC9-36V 23 16.2 The temperature sensor diagram: Blue wire connects GND Black wire connects the trackers Oil test wireVDD connect s+DC9-36V GND connects GND VO-connects GND VO+connects the trackers temperature test wire Temperature detecting stick, put to test temperature place 24 16.3 |][| 16.4 RFID [| ||,|4PIN |, ||,|4PIN |, |_|[)_ 25 ||||]| |||RFID |