XM60 B09 X fold style

wrapping machine

overview

manufacturing program

dimensions

The XM60 B X Fold style wrapping machi-ne is engineered to produce the highest quality roll-wrapped biscuits and similar product slug style packs, with longitudinal and end fold seals. The machine is servo driven. Its heavy duty

XM60 B XM60B WC Version Single Wrap Double Wrap

Packs/min 60+ 40+Inner wrap None Waived cardboardControl platform ELAU C200 ELAU C200

product/package

Min Maxslug lenght 60 260product lenght 30 90product diameter 35 70product height 30 70

machine

lenght 2515*width 1660height 2200weight 2500 Kg*without in feed chain

design, construction features, high speed and format changeover fl exibility, make this equipment particularly suitable for the inte-gration as terminal of product’s automatic handling and feeding systems as well as for semi automatic and manual feedings.

User friendly on board HMI as well as in-tuitive menus, easy to perform interface tasks with any equipment up stream, solid construction and uncompromising quality of the components and materials makes of XM60 a trustworthy piece of equipment.

main features

end seal details

fi lm feed details

infeed conveyor (chain) details

optionals

• Strong welded frame • Cantilevered construction. • No.1 product format size included in basic machine• HMI Colour Schneider 8” Touch Screen Operator’s friendly

interface on swivelling arm.• Guards and product contact parts in Stainless Steel AISI 304• Independent brushless motors with separate digital control,

through optic fi bres, synchronized by the central control.

• No 1 Longitudinal sealing station• No 1 End fold station• No 1 End sealing stations• Temperature sensors by Constantan Iron Thermo Couple.• Seal elements in Tefl on coated stainless steel.

• Double reel holders with fi ne adjustment for fi lm alignment.

• Reel width: 120 to 370 mm• Max reel diameter: 350 mm• Cut length: 130 to 400 mm

• Wrapping material: Both side heat polypropylene sealable fi lm Cellulose fi lms Coated polypropylene Aluminium laminated fi lms Paper laminated fi lms

• 3500 mm rod bars in feed chain• Top plates in stainless steel AISI 304 and adjustable side guides

• Bad slug discharge device• Retrofi t inner waived cardboard (standard on XM60WC)

DisclaimerHBTS reserves the right to modify its design and specifi cation without incurring any obligation due to the continuous improvements of this product.

• Front doors safe switched in heavy duty clear polycarbonate• Side sealing area safe guard in heavy duty polycarbonate• Provisions for the fi tting of a coding unit (not included)• Emergency spare parts kit.• European CE safety certifi cation.• Air consumption 14Nl/min• Installed power 8 KW• Colour HBTS standard RAL 9007

• Heat insulation by Ketron Peek 1000 plates• Seal and bend sealing or fold over sealing available• Sealing temperature controlled via HMI through electronic

PID control

• Electronically controlled print registration with +/- correction• Balancing arm for constant fi lm tension control• Automatic reel splicing• Transversal Tear tape applicator device• Broken fi lm sensor• No product No wrap detector

• Mechanical chain tensioning device• Products discharge trap

• Engraved sealing plates over the 4th end seal station

Via San Paolo, 9010095 Grugliasco TO Italy

Ph + 39 011 07 03 700F + 39 011 07 03 749

www.hbts.euinfo@hbts.it