XLX 3000 With Dynacon LARS Rev3

XLX 3,000M ROV SPECIFICATION SHEETWITH DYNACON LARS

www.integratedsubsea.com

REMOTELY OPERATEDVEHICLEOperating Conditions Up to and including Sea State 6 (3g)Depth Rating 3050 metres sea waterHydraulic Power 112kW 150 HPLength 3226mmWidth 1803mmHeight 2000mmIn AirWeight 4900kgIn Seawater Weight NeutralFwd/Aft Bollard Pull 1100kgfLateral Bollard Pull 1100kgfVertical Bollard Pull 900kgfFwd/Aft Surface Speed 3+ knotsLateral Surface Speed 3+ knotsVerical Speed 3+ knotsPayload 250kg with all std equip fittedThrough Frame Lift 3000kg @3g at work skid attachment pointsMain Pump 240bar @348 lpmIHPU Pump 220bar @70 lpmPropulsion 4 x 380mm horizontal and

4 x 300mm vertical hydraulic thrustersThruster Control Manifold One intelligent, 16 station control with 4x

High Flow for toolingMain Manifold One intelligent, 16 station bi-directional

13 proportional control manifoldIHPU Manifold 12 station proportional

surface controlled manifoldAuto Functions Heading, Depth,Altitude, Pitch & Roll

Auto Positioning (ROV DP)Utilising RDI 1200 Doppler log

Heading Control Tritech ICG & IFG sensorsDepth Control Digiquartz Depth sensorAltitude Control RDI 1200 Doppler logTelemetry 8 x RS232 data channels + 8x RS485

8 x video channelsvia single mode fibre

Lighting Up to 12 x 250W lampsEquipment Interface Survey JB upto 32 channels

FOG interface

VEHICLE EQUIPMENT FIT AS STANDARDManipulator 1 x Schilling T4 with wrist cameraGrabber 1 x Schilling RigmasterCamera Pan andTilt 3 x Tritech PT3636-CColour Cameras 2 x OE14-366 Colour Zoom Cameras

1 x OE14-106 Colour Camera1 x OE14-110 Colour Camera1 x Schilling T4 wrist camera

Low Light Camera 1 x OE15-102 SIT Equiv CameraSonar 1 x Siimrad 1007Emergency Flasher 1 x Novatech StrobeEmergency RF Beacon 1 x Novatech Beacon

TETHER MANAGEMENT SYSTEMOperating Conditions Up to and including Sea State 6 (3g)Depth Rating 3000 metres sea waterTether Capacity 440m of 35mm Tether

750m of 27mm Tether (Option)Hydraulic Power 7.6kW 10HPDiameter 1800mmHeight 2026mmIn AirWeight 3000kgIn SeawaterWeight 2163kgDepth Measurement 1 x Digiquartz Depth sensorLighting 2 x 250W lampsVideo 1 x OE14-110 Colour Camera

CONTROL CONTAINER & EQUIPMENTControl Container A60. DNV 2.7-1Length 6058mmWidth 2438mmHeight 2743mmWeight 10,000kgAir conditioning 1x 17.5KWIncoming Supplies 1 x 440Vac, 60Hz, 3 Phase main supply

A FRAMEASSEMBLYType Hydraulically powered A frame c/w umbilical

sheave, damped snubber and rotating frameSafeWorking Load 11,250 kg in water 9,000kg in airDesign Factor 3gDeployed Reach 3,150mmDimensions 7,315mm (L) x 3,213 (W) 8,912 (H) DeployedWeight 18,141 kg nominal

UMBILICALWINCHType Hydraulically powered from external power unitSafeWorking Load 12,000kg on top layerDesign Factor 3gUmbilical Storage Capacity 3300m of 40.5mm diameter umbilical LineSpeed Variable up to 30 metres per minute Braking

Independent Emergency braking systemDimensions 3,150mm (L) x 5,048 (W) x 4,039mm (H)Weight 32700kg nominal with 3500m of umbilical installedControl Local and remote from Pilot control station


XLX 3,000M ROV SPECIFICATION SHEETWITH DYNACON LARS


The XLX is the ultimate in hydraulic heavy-duty Dual constructionand Survey class remotely operated vehicles (ROVs).This all-new design, benefits from over thirty years of underwatervehicle build programmes and incorporates a number of enhancedcomponents from the worlds most respected underwater vehiclebuilders.Designed and built to perform the most exacting operations in theharshest of environments for long periods, the XLX provides thenecessary attributes to get the job done.With an impressive 1,100kgf thrust performance, the XLX is in aclass of its own.The XLX is particularly suited for heavy-duty construction support,where remote intervention tasks are required such as positioning ofsubsea structures, pipeline/umbilical connection, pipeline

repair, component change-out, valve operation, fluid injection, debrisremoval, plus many more. To enhance the capability of the XLX, it maybe fitted with purpose built tooling skids weighing up to 3000kg(3Te.) in air. The vehicle may be fitted with a range of acoustic sensorsto perform precision surveys and conduct salvage operations.Deep-water operations are aided by the use of a complimentary tophat tether management system (TMS), designed to maximise theperformance of the vehicle by eliminating the effects of umbilicaldrag and vessel motion.Built in diagnostics aids fault finding..

ITEM MODEL DIMENSIONSWEIGHT

XLX WROV Triton XLX 150HP 3232 L x 1803 W x 1994 H 4900kgXLX TMS Type IV Top Hat 1800 x 2026 H 2400kg

LARS Dynacon 6023 7315 L x 3225 W x 8912 H (max operational) 20400kgLARS Dynacon 6023 7836 L x 3278 W x 3061 H (transport) 20400kgWinch Dynacon 521 XL 2896 L x 3150 W x 3289 H 32700kgWinch HPU Dynacon 2532 L x 1403 W x 2219 H 3900kg

Control Van A60 6058 L x 2438 W x 2591 H 10900kgWorkshop Van A60 6058 L x 2438 W x 2591 H 10900kg

Purge Cart Dynacon 2134 L x 864 W x 1378 H 2850kgLars Control Dynacon 1143 L x 483 W x 1106 H 115kg

UKIntegrated Subsea Services LtdOcean Spirits House33 Waterloo QuayAberdeenAB11 5BSUnited Kingdom

Tel: +44 (0) 1224 729 944Fax: +44 (0) 1224 729 071Email: [email protected]

SINGAPOREIntegrated Subsea Services Asia PacificPTE Ltd19 Loyang LaneSingapore 508929

Tel: +65 6597 5777Fax: +65 6597 5770Email: [email protected]

AUSTRALIAIntegrated Subsea Services (Australia) LtdSmyth House 938 Hay Street,PerthWestern Australia 6000AustraliaTel: +61 8 9266 8800Fax: +61 8 9266 8806Email: [email protected]


Documents

XLX 3000 With Dynacon LARS Rev3