xl_series

8/10/2019 xl_series

1/9

Extended Life Synthetic Motor Oils, SAE 0W-20, 5W-20, 5W-30, 10W-30, 10W-40

Liquid.

GHS product identifier

Product type

Emergency telephone

number (with hours of

operation)

Section 1. Identification

:

:

:

Code : XLZ, XLF, XLM, XLO, XLT

Supplier's details :

Identified uses

R

Extended Life Synthetic Motor Oils, SAE 0W-20, 5W-20, 5W-30, 10W-30, 10W-40

SAFETY DATA SHEET

Conforms to HazCom 2012 - United States

AMSOIL INC.

One AMSOIL CenterSuperior, WI 54880

CHEMTREC, U.S. : 1-800-424-9300 International: +1-703-527-3887(24/7)

Lubricating oil. Not to be misted.

Date

Version

:

:

02/15/2014

5

Not classified.Classification of the

substance or mixture

:

Signal word : No signal word.

Hazard statements : No known significant effects or critical hazards.

Precautionary statements

Prevention : Not applicable.

Response : Not applicable.

Storage : Not applicable.

Disposal : Not applicable.

GHS label elements

Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 10%

Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquaticenvironment: 10%

OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard CommunicationStandard (29 CFR 1910.1200), this MSDS contains valuable information critical to the

safe handling and proper use of the product. This MSDS should be retained andavailable for employees and other users of this product.

Hazards not otherwise

classified

: None known.

Section 2. Hazards identification

1/9 02/15/2014:Date of issue

8/10/2019 xl_series

2/9

8/10/2019 xl_series

3/9

Extended Life Synthetic Motor Oils, SAE 0W-20, 5W-20, 5W-30, 10W-30, 10W-40 XLZ, XLF, XLM, XLO, XLT

No special protection is required.

Hazardous thermal

decomposition products

Specific hazards arising

from the chemical

No specific data.

No specific fire or explosion hazard.

Fire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective

equipment for fire-fighters

Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media

:

:

:

None known.

Suitable extinguishingmedia

:

Unsuitable extinguishing

media

:

Special protective actions

for fire-fighters

:

Section 5. Fire-fighting measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

:

: Put on appropriate personal protective equipment.

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

For non-emergency

personnel

For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information

in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel".

Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,water courses, basements or confined areas. Wash spillages into an effluent treatmentplant or proceed as follows. Contain and collect spillage with non-combustible,absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in

container for disposal according to local regulations (see Section 13). Dispose via alicensed waste disposal contractor. Note: see Section 1 for emergency contactinformation and Section 13 for waste disposal.

:Spill

Section 6. Accidental release measures

Advice on general

occupational hygiene

Eating, drinking and smoking should be prohibited in areas where this material ishandled, stored and processed. Workers should wash hands and face before eating,

drinking and smoking. See also Section 8 for additional information on hygienemeasures.

:

Protective measures Put on appropriate personal protective equipment (see Section 8).:

Precautions for safe handling

Section 7. Handling and storage

3/9 02/15/2014:Date of issue

8/10/2019 xl_series

4/9


Conditions for safe storage,

including any

incompatibilities

Store in accordance with local regulations. Store in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatible materials(see Section 10) and food and drink. Keep container tightly closed and sealed untilready for use. Containers that have been opened must be carefully resealed and keptupright to prevent leakage. Do not store in unlabeled containers. Use appropriatecontainment to avoid environmental contamination.

:

Hand protection

Use a properly fitted, air-purifying or supplied air respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safe

working limits of the selected respirator.

Chemical-resistant, impervious gloves complying with an approved standard should beworn at all times when handling chemical products if a risk assessment indicates this isnecessary.

Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.

Eye/face protection

Respiratory protection :

:

:

Body protection Personal protective equipment for the body should be selected based on the task beingperformed and the risks involved and should be approved by a specialist beforehandling this product.

:

Environmental exposure

controls

: Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation.

Appropriate engineering

controls

: Good general ventilation should be sufficient to control worker exposure to airbornecontaminants.

Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period. Ensurethat eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters

Individual protection measures

Occupational exposure limits

Skin protection

Other skin protection : Appropriate footwear and any additional skin protection measures should be selectedbased on the task being performed and the risks involved and should be approved by aspecialist before handling this product.

Section 8. Exposure controls/personal protection

Under conditions which may generate mists, the following exposure limits are recommended:

ACGIH TLV TWA: 5 mg/m ; STEL: 10 mg/m.

Physical state

Melting point

Liquid. [Clear.]

-45 to -38C (-49 to -36.4F)

Mild/Hydrocarbon.Odor

pH

Amber.Color

Not available.

Not available.Odor threshold

:

:

:

:

::

Appearance

Boiling point : Not available.

Section 9. Physical and chemical properties

4/9 02/15/2014:Date of issue

8/10/2019 xl_series

5/9


Vapor pressure

Relative density

Vapor density

Solubility

0.8483 to 0.8581

Not available.

Not available.

Not available.

Evaporation rate Not available.

Auto-ignition temperature

Flash point

Not available.

Open cup: 226 to 236C (438.8 to 456.8F) [Cleveland.]

Not available.

Viscosity Kinematic: 0.088 to 0.152 cm2/s (8.8 to 15.2 cSt) (100oC)Kinematic: 0.513 to 1.027 cm2/s (51.3 to 102.7 cSt) (40oC)

Partition coefficient: n-

octanol/water

:

:

:

:

:

:

:

:

:

Flammability (solid, gas) : Not available.

Lower and upper explosive

(flammable) limits

: Not available.

Decomposition temperature : Not available.

Hazardous decomposition

products

Conditions to avoid No specific data.

Under normal conditions of storage and use, hazardous decomposition products shouldnot be produced.

The product is stable.Chemical stability

Reactive or incompatible with the following materials: oxidizing materials.

:

:

:

Incompatible materials :

Possibility of hazardous

reactions

: Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Section 10. Stability and reactivity

Carcinogenicity

Specific target organ toxicity (single exposure)

Information on toxicological effectsAcute toxicity

Irritation/Corrosion

Sensitization

There is no data available.




There is no data available.Specific target organ toxicity (repeated exposure)


Section 11. Toxicological information

5/9 02/15/2014:Date of issue

8/10/2019 xl_series

6/9


Information on the likely

routes of exposure

Inhalation : No known significant effects or critical hazards.

No known significant effects or critical hazards.:Ingestion

Skin contact : No known significant effects or critical hazards.

No known significant effects or critical hazards.:Eye contact

No known significant effects or critical hazards.General :

No known significant effects or critical hazards.Carcinogenicity :

No known significant effects or critical hazards.Mutagenicity :

No known significant effects or critical hazards.Teratogenicity :

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Skin contact

Ingestion

Inhalation No known significant effects or critical hazards.

No known significant effects or critical hazards.

No known significant effects or critical hazards.

:

:

:

Eye contact : No known significant effects or critical hazards.

Potential chronic health effects

Delayed and immediate effects and also chronic effects from short and long term exposure

Numerical measures of toxicity

Acute toxicity estimates

Aspiration hazard

: Dermal contact. Eye contact. Inhalation. Ingestion.

Potential acute health effects

Potential immediate

effects

: No known significant effects or critical hazards.

Short term exposure

Potential delayed effects : No known significant effects or critical hazards.

Potential immediate

effects

: No known significant effects or critical hazards.

Long term exposure

Potential delayed effects : No known significant effects or critical hazards.



Toxicity

Persistence and degradability



Section 12. Ecological information

6/9 02/15/2014:Date of issue

8/10/2019 xl_series

7/9


Bioaccumulative potential

Other adverse effects : No known significant effects or critical hazards.

Soil/water partitioncoefficient (KOC) : There is no data available.

Mobility in soil


The generation of waste should be avoided or minimized wherever possible. Disposalof this product, solutions and any by-products should comply with the requirements ofenvironmental protection and waste disposal legislation and any regional local authorityrequirements. Dispose of surplus and non-recyclable products via a licensed waste

disposal contractor. Waste should not be disposed of untreated to the sewer unlessfully compliant with the requirements of all authorities with jurisdiction. Wastepackaging should be recycled. Incineration or landfill should only be considered whenrecycling is not feasible. This material and its container must be disposed of in a safeway. Empty containers or liners may retain some product residues. Avoid dispersal ofspilled material and runoff and contact with soil, waterways, drains and sewers.

:Disposal methods

Section 13. Disposal considerations

-

-

-

-

-

-

-

Not regulated.

-

-

Not regulated. Not regulated.

- - -

IMDG IATA

UN number

UN proper

shipping name

Transport

hazard class(es)

Packing group

Additional

information

Environmental

hazards

Special precautions for user

Transport in bulk according

to Annex II of MARPOL

73/78 and the IBC Code

No. No. No.

Transport within users premises:always transport in closed containers that are

upright and secure. Ensure that persons transporting the product know what to do in theevent of an accident or spillage.

: Not available.

:

AERG : Not applicable.

DOT Classification

Section 14. Transport information

7/9 02/15/2014:Date of issue

8/10/2019 xl_series

8/9


U.S. Federal regulations

The following components are listed: Distillates, hydrotreated light paraffinic

No products were found.

Clean Water Act (CWA) 307: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc

salts

Massachusetts

:

:

California Prop. 65

Clean Air Act Section 112

(b) Hazardous Air

Pollutants (HAPs)

: Not listed


Class I Substances

: Not listed


Class II Substances

: Not listed

DEA List I Chemicals

(Precursor Chemicals)

: Not listed

DEA List II Chemicals

(Essential Chemicals)

: Not listed

New York : None of the components are listed.

New Jersey : The following components are listed: Distillates, hydrotreated heavyparaffinic; Distillates, hydrotreated light paraffinic; White mineral oil

Pennsylvania : None of the components are listed.

State regulations

TSCA 8(a) PAIR: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts

TSCA 8(a) CDR Exempt/Partial exemption: Not determined

SARA 302/304

SARA 304 RQ : Not applicable.

SARA 311/312

Classification : Not applicable.

International regulations

Chemical Weapon Convention List Schedules I, II & III Chemicals

Montreal Protocol (Annexes A, B, C, E)

Not listed.

Ingredient name List name Status

Stockholm Convention on Persistent Organic Pollutants

Not listed.


Rotterdam Convention on Prior Inform Consent (PIC)

Not listed.


Section 15. Regulatory information

United States inventory (TSCA 8b): All components are listed or exempted.

No products were found.

8/9 02/15/2014:Date of issue

8/10/2019 xl_series

9/9


Not listed.


UNECE Aarhus Protocol on POPs and Heavy Metals

Not listed.


History

Prepared by :

Date of issue mm/dd/yyyy

Date of previous issue

Version :

:

:

5

02/15/2014

03/15/2013

Notice to reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its

subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be

used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Section 16. Other information

AMSOIL INC.

9/9 02/15/2014:Date of issue

Documents

xl_series