XGB-INV IG5A (RS-485 Modbus RTU)
Sample programReception ( D100, 1word )
The communication between IG5A and built-in XGB Cnet through ch2
(RS-485). XGB Sample Program
Transmission ( M000, M001 2 words )
IG5A Setting : DRV=3(RS-485), FRQ=7(RS-485), I59=0(Modbus RTU),
I60=1(station no.), I61=4(19,200bps), I65=0(Parity:None, Stop
Bit:1)Eg) XGB (D1000 or M000 1 Word data) -> address no. 5 of
iG5A inverter (Frequency reference ) XGB (M001 1 Word data) ->
address no. 6 of iG5A inverter (Run command )
1/ 2
XGB-INV IG5A (RS-485 Modbus RTU)XG-PD Parameter setting Please
set Channel 2 of Active mode to Use P2P settings in using XG-PD of
XG5000.
Sample program
You have to set P2P Channel to Modbus RTU client.
P2P Block setting
2/ 2
