Xerox DocuPrint 4850/4890/92C NPS/IPSdownload.support.xerox.com/pub/docs/DocuPrint_4850/... · APA (all-points addressability) SJ 2-1 Apollo workstation SJ 2-15 AppleTalk PD 1-17

Xerox DocuPrint 4850/4890/92C NPS/IPSMaster Index

721P90571Version 8.0October 2002

Xerox Corporation701 S. Aviation BoulevardEl Segundo, CA 90245

©2002 by Xerox Corporation. All rights reserved.

Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P90571

Xerox® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged.

Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

Index

Symbols#copies operator PD 1-9%%DocumentMedia command, example PJ

4-3%%XEROX-XIPP command PJ 6-7%stdin PD 1-31() (parentheses)

DOS xcat DC 6-15SunOS/Solaris formmerge DC 6-19

.pfb extension PD 1-6/var/db/forms directory DC 4-3, DC 6-3/var/spool/data directory PJ 6-3

File of Files default DC 6-5generating PostScript files DC 6-3storing files DC C-1Xcat jobs default DC 6-12

Numerics4 mm cartridge tape drive IP 5-9, IP 5-104850 dry ink waste container, replacing RM

6-4–RM 6-64mm cartridge tape drive, cleaning RM 8-250 Hz voltage requirements

Delta configurations IP 6-360 Hz voltage requirements IP 6-2

Aaccess level

Cancel Documents command PJ 3-4Change Document Attributes PJ 1-29Change Virtual Printer PJ 2-3–PJ 2-4Copy Virtual Printer PJ 2-4Create Virtual Printer PJ 2-2Delete Virtual Printer PJ 2-4EndOfRun command PJ 5-4–PJ 5-7EndOfSet command PJ 5-6–PJ 5-7Forward Document command PJ 3-5Hold Documents PJ 3-6List Documents PJ 3-7–PJ 3-10

List Virtual Printers PJ 2-5Promote Document PJ 3-11Release Documents PJ 3-11Set Virtual Printer Flags PJ 2-8Show Document Attributes PJ 1-30Show Scheduling Policy PJ 3-12Staple command PJ 5-7Start PJ 3-13Start Virtual Printer PJ 2-7Stop Virtual Printer PJ 2-7

access requirements, delivery IP 6-16–IP 6-18

access to printer, remotelytelnet SJ 8-1Web-based SJ 8-1

access, remote CM 1-4Account information, Quick Print for

Windows NT 4.0 SJ 6-24account information, specifying PJ 1-8accounting file versions CM 9-2accounting files

copying to floppy CM 9-8deleting CM 9-9maintaining CM 9-1–CM 9-9purging CM 9-7

accounting information, purging SJ 4-10Active List PJ 3-1adding Job Ticket PJ 4-2additional metrics entry PD 1-3address data, merging DC G-1addressing, relative PJ 6-1administrative mode DC 7-9administrator

accessing commands CM 1-2changing password CM 1-3

AdobeType Manager PD 1-6

Adobe fonts IP 2-8, SO 2-8Adobe Photoshop DC 9-1

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP= Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

Master Index INDEX-1

INDEX

AdobePS driversselecting SJ 4-6submitting print jobs SJ 4-22–SJ 4-38

Advanced Customer Training (ACT) IP B-4, RM 9-2

Advanced Function Image and Graphics (AFIG) SO 5-1

Advanced Function Presentation, see AFPadvanced PostScript options

Windows NT 4.0 (transparent)compressing graphics SJ 5-32overview SJ 5-31–SJ 5-36printing error information SJ 5-33printing graphics in color SJ 5-33printing mirror images SJ 5-33printing negative images SJ 5-33printing with printer fonts SJ 5-34specifying format SJ 5-36specifying halftoning options SJ 5-35specifying printing resolution SJ 5-35using substitution table SJ 5-34using TrueType fonts SJ 5-36

AFPdata flows IS 10-1–IS 10-7definition SJ 2-1overview IS 1-1page origins, modifying IS 4-19print flows IS 10-1–IS 10-7resources SJ 2-1–SJ 2-3summary SJ 2-1

AFP environment IP 1-8, SO 5-5AFP Font Collection SJ 2-3, IS 4-2AFPDS SJ 2-5AIX print flow IS 10-6alignment, third-party finishing devices IP

3-14, SO 3-14APA (all-points addressability) SJ 2-1Apollo workstation SJ 2-15AppleTalk PD 1-17

network SJ 4-10zone name, specifying SJ 4-10

application examples DC 1-2applications, customer responsibility SJ 4-4appName subdirectory PJ 6-2architecture SJ 3-4–SJ 3-7arc-to-bezier conversion PD 1-33

area 3, clearing paper jams TG 4-14area 4, clearing paper jams TG 4-15–TG

4-17area 5, clearing paper jams TG 4-18–TG

4-19area 7, clearing paper jams TG 4-22–TG

4-23area 8, clearing paper jams TG 4-24area 9, clearing paper jams TG 4-25areas 1 and 1A, clearing paper jams TG

4-10–TG 4-11areas 2 and 2A, clearing paper jams TG

4-12–TG 4-13areas 6 and 6A, clearing paper jams TG

4-20–TG 4-21areas A and B, clearing stitcher/stacker tray

paper jams TG 4-27–TG 4-28AS/400

AFP data flow IS 10-5connections SJ 2-11–SJ 2-12

AS/400, parameters IP F-21–IP F-28ASCII greeting message CM 12-4ASCII input PD 1-22ASCIIFontName attribute PJ 1-8ASCIIFontSize attribute PJ 1-8asynchronous communications PD 1-18Attention light RM 2-1–RM 2-2, RM 5-1attention light IP 3-3, SO 3-3attributes

changing PJ 1-29description PJ 1-1methods for selecting PJ 1-3precedence PJ 1-6priority in setting PJ 1-6setting PJ 1-2showing PJ 1-30understanding PJ 1-1virtual printer PJ 2-1

attributes, highlight color SO 1-8attributes, overview SJ 1-2.attrs file CM 2-3automatic highlight color rendering PJ 1-15AutoTabShift attribute PJ 1-8award certificate example DC 4-1, DC 4-7

INDEX-2 Master Index

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IP = Installation Planning Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX

Bback panel, Sun workstations IP 2-3, SO 2-4background form DC 7-2Background Forms

creating DC 5-1–DC 5-4cycling DC 5-5–DC 5-8

background menu CM 3-3background printing, Macintosh

AdobePS driver SJ 4-26LaserWriter driver version 7.x SJ 4-2LaserWriter version 8.x SJ 4-14

backing upsite files CM 2-9virtual printers list CM 2-11Xerox files CM 2-10

backing up forms DC F-1Backup Site Files command CM 2-9Backup Virtual Printers List command CM

2-11Backup Xerox Files command CM 2-10banking applications, example IS 1-7banner page

job messageQuick Print for Windows NT 4.0 SJ

6-13, SJ 6-14Windows NT 4.0 (transparent) SJ

5-21sender name

Macintosh drivers (transparent) SJ 4-9

banner pages CM 4-1banner pages, Novell PJ 3-18bar compression CM 2-3, CM 2-5, CM 2-6BARR/AFP connection SJ 2-12BARR/RJE connection SJ 2-9BCOCA SJ 2-4BCOCA (Bar code Object Content

Architecture) IP 1-8, SO 5-5benefit book example DC 1-3bezier PD 1-33billing

meterdisplaying CM 8-8printing, data CM 8-11

report, printing CM 8-11billing meter

reading IP 8-5reporting IP 8-5

binary input PD 1-22bindery entry PJ 3-16bitmaps PD 1-4, PD 1-14BitsPerSample TIFF tag DC E-1black areas, mapping PJ 1-16black pixels

GetTiff macro DC 8-5Blank Back Sides PJ 1-9blank pages

XCat DC 6-10XMerge DC 6-5, DC 6-7, DC 6-14, DC

6-18booting the controller CM 3-2borders, invisible frame DC 4-7bounding box padding PD 1-32break page PD 1-18broadcast message

utility command CM 2-1Broadcast Message to All Execs command

CM 2-1Broadcast message to all execs command

CM 2-1browser based access CM 1-5BuildProfile option SJ 2-21bus and tag

channel connection IP 1-4, SO 5-2bypass transport IP 1-4, IP 3-11–IP 3-15, SO

1-4, SO 3-11–SO 3-15installing RM 7-3–RM 7-5power requirements IP 6-20removing RM 7-1–RM 7-3

bypass transport, clearing paper jams TG 4-28–TG 4-29

ByteCode filesfiles created DC A-2proprietary compression DC 5-2Tiff/G4 format compared DC 3-2

Ccables

IBM channel IP 7-3locations IP 7-2power IP 6-3

calculating throughput DC D1-2



INDEX

calibrationevaluating output CM 15-2when to perform CM 15-1

Cancel Documents command PJ 3-4canceling commands CM 1-2capabilities SJ 3-8–SJ 3-10cartridge tape

drive IP 5-9, IP 5-10ordering IP A+7

CCITTprinting speed PD 1-34–PD 1-35specifications PD 1-34

CCU changeout cart IP 3-7, IP 6-6, IP 6-10, IP 6-11, SO 3-7

CCUscart, storing RM 5-12exchanging RM 5-5–RM 5-13loading RM 5-11–RM 5-12removing existing RM 5-5–RM 5-10

CD-ROMejecting CM 2-2installing CM 10-2installing software updates from CM 2-7listing files on CM 2-8printing files from CM 2-8

central processing unit IP 2-2, IP 2-6, SO 2-3, SO 2-6

Change Administrator Password command CM 1-3

Change Document Attributes command PJ 1-29

Change Imager Parameters command CM 5-30

Change PCL Imager Parameters command CM 5-34

Change Virtual Printer command PJ 2-3–PJ 2-4

Change virtual printer commandCycleForms attribute DC 5-5–DC 5-8disposition attribute

examples DC 3-7, DC 4-3Mask, Form formats DC 3-3–DC 3-6syntax DC 7-3Tiff/G4, ByteCode formats DC 3-2values DC 3-1

overview DC 7-2

changeout cart IP 6-11changing imager parameters CM 5-30changing password

administrator CM 1-3operator CM 1-3

changing PCL imager parameters CM 5-34channel

switching online and offline PJ 3-15channel attachments IP E-1–IP E-3, IP E-6,

IP E-7channel cable connector box IP 1-6, SO 5-3channel extender SJ 2-9channel interface board IP 1-6, SO 5-3channel switching PJ 3-15channel-attached

cables IP 7-3systems IP 1-6, IP 1-7, SO 5-3, SO 5-4

chapters, concatenatingDOS xcat DC 6-15Sun OS/Solaris DC 6-19Windows XCat DC 6-7–DC 6-12

charactercodes PD 1-6illegal PD 1-18–PD 1-20

characteristics, image PD 1-15charpath operator PD 1-21checking

dual stacker trays RM 2-1feeder trays RM 1-1stitcher/stacker trays RM 2-2

checklistsinstallation planning SJ 4-4–SJ 4-7network installation SJ 4-8–SJ 4-14preinstallation SJ 4-8

Chinese fonts PD 1-3cleaning

4mm cartridge tape drive RM 8-2keyboard RM 8-1monitor RM 8-1Printer Controller exterior RM 8-1

clearance space IP 6-5, IP 6-12–IP 6-14clearing

bypass transport paper jams TG 4-28–TG 4-29

feeder trays TG 4-1–TG 4-5paper jams



INDEX

area 3 TG 4-14area 4 TG 4-15–TG 4-17area 5 TG 4-18–TG 4-19area 7 TG 4-22–TG 4-23area 8 TG 4-24area 9 TG 4-25areas 1 and 1A TG 4-10–TG 4-11areas 2 and 2A TG 4-12–TG 4-13areas 6 and 6A TG 4-20–TG 4-21

stacker tray paper jams TG 4-26stitcher/stacker tray paper jams (areas A

and B) TG 4-27–TG 4-28client workstations

communicating with network SJ 1-5–SJ 1-6

overview SJ 1-1CMYK default PJ 1-23code examples, PostScript PJ 6-4collating, PCL Copy command PD 2-6color

adding IS 5-1conditional processing IS 5-5data driven IS 1-1, IS 5-3evaluating output CM 15-2full IS 5-2lines and borders IS 5-8mapping IS 5-3overlays IS 5-7shading IS 5-9when to calibrate CM 15-1

color calibration SJ 2-21procedure CM 15-2work flow CM 15-5

color driver, Macintosh LaserWriter driver 8.x SJ 4-40

Color images SJ 2-5color in forms DC 3-1, DC 3-6, DC 5-1color limitations IS 9-1color models, using IS 5-3color saturation SO 1-8color substitution, highlight color SO 1-8colors

presentation, matching PJ 1-14preset PJ 1-14rendering, automatic PJ 1-15replacing PJ 1-16

saturationconverting PJ 1-14specifying PJ 1-14

colorTables highlight color rendering PJ 1-14colorToHighlight rendering PJ 1-14command

job status SO 4-6lpq SO 4-5lpr SO 4-5

command sets SJ 3-5command signals, third-party finishing

devices IP 3-15, SO 3-15commands

administrator, accessing CM 1-2Cancel Documents PJ 3-4canceling CM 1-2Change Virtual Printer PJ 2-3–PJ 2-4Configure utility CM 2-19–CM 2-29control-D PD 1-17–PD 1-22control-Z PD 1-18–PD 1-22Copy Virtual Printer PJ 2-4copying

accounting data to floppy CM 9-8documents to floppy CM 2-3, CM 2-4,

CM 2-5logs CM 9-11

Create Virtual Printer PJ 2-2Delete Virtual Printer PJ 2-4deleting

accounting files CM 9-7, CM 9-9fonts CM 10-4forms CM 11-4logs CM 9-12

Duplex, PCL PD 2-9End, combining PJ 5-6EndOfSet PJ 5-3–PJ 5-4entering CM 1-1font installation IP 2-8, SO 2-8Forward Document PJ 3-5Hold Documents PJ 3-6installing

fonts from disk CM 10-2PCL fonts from disk CM 10-3

job submission SJ 4-10LCDS PD 3-2licensing CM 2-15–CM 2-18



INDEX

List Documents PJ 3-7–PJ 3-10List Virtual Printers PJ 2-5listing CM 1-1

CDROM fonts CM 10-6floppy fonts CM 10-6fonts CM 10-6logs CM 9-10

listjob SJ 3-35listq SJ 3-38lpc (UNIX) SJ 3-57lpd SJ 4-10lpq (DOS) SJ 3-53lpq (UNIX) SJ 3-54lpr SJ 4-10, SJ 3-41lprm SJ 3-55merge, inserting DC G-7operator, accessing CM 1-2PCL Copy PD 2-8–PD 2-9PCL Paper Source PD 2-12PJL PD 2-6print SJ 3-24printing

font list CM 10-8font sample CM 10-8form samples CM 11-3PCL font sample CM 10-9

Promote Document PJ 3-11Release Document PJ 3-11Set IPDS Virtual Printer PJ 2-10Set Scheduling Policy PJ 3-12sets, installing PD 3-4shortcuts CM 1-1Show Document Attributes PJ 1-30Show IPDS Virtual Printer PJ 2-10Show Scheduling Policy PJ 3-13Start PJ 3-13Start Virtual Printer PJ 2-7status SJ 4-10Stop PJ 3-14telnet CM 1-4terminating CM 1-2UNIX command tool SJ 4-10utility CM 2-1–CM 2-13

communications, asynchronous PD 1-18Compatibility fonts IS 4-11complete media match PJ 4-6

completed sheets PJ 1-21components

DocuPrint system IP 1-8hardware IP 5-8printer controller IP 2-1, SO 2-2printing system IP 1-9

components, curveto PD 1-33compression

bar CM 2-3, CM 2-5, CM 2-6ByteCode files DC 3-3, DC 5-2quality PD 1-34TIFF images PJ 6-4

compression tag, TIFF DC 8-5, DC E-1concatenating chapters

DOS XCat DC 6-15Sun OS/Solaris DC 6-19Windows XCat DC 6-7–DC 6-12

conditional processing, adding color IS 5-5conditioning paper IP A+4–IP A+5, SO 6-4–

SO 6-5conditions, print queue PJ 3-1configuration

choosing remote printer or print server CM 4-1–CM 4-3

differences between RPRINTER and PSERVER CM 4-1–CM 4-3

configuration reportsprinting CM 2-23

configuration, network IP 1-11Configure utility

changeable parameters CM 2-20options CM 2-23

Configure utility commands CM 2-19–CM 2-29

configuringNFS daemon CM 13-2

configuring as PSERVER CM 4-4configuring as RPRINTER CM 4-5connections

AS/400 SJ 2-11–SJ 2-13mainframes SJ 2-7–SJ 2-11RS/6000 SJ 2-13–SJ 2-15

connections, Ethernet SO 4-4–SO 4-5connectivity

multiple SO 4-7connectivity boards IP 2-5, SO 2-5



INDEX

consistencyfont PD 1-16

consumable supplies tables SO 6-9–SO 6-13

consumables supplies tables IP A+8–IP A+14

continue button IP 3-5, SO 3-5continuous form, converting IS 4-18control-D command PD 1-17–PD 1-22controller

powering on CM 3-2control-Z command PD 1-18–PD 1-22conversion

arc-to-bezier PD 1-33LCDS commands PD 3-2

conversion programs IS 8-1–IS 8-4coordinates

device PD 1-1–PD 1-2, PD 1-32user PD 1-1–PD 1-2, PD 1-39–PD 1-41

Copies attribute PJ 5-11copies, multiple PJ 5-11Copy Accounting to Floppy command CM

9-8copy count

Macintosh driversAdobePS SJ 4-24LaserWriter 7.x SJ 4-9LaserWriter 8.x SJ 4-13

Quick Print for Windows NT 4.0 SJ 6-11Windows NT 4.0 (transparent) SJ 5-17

Copy Documents to DOS Floppy command CM 2-4

Copy Documents to Floppy command CM 2-3

Copy Documents to Tape command CM 2-4, CM 2-5

Copy IOT Fault Data to Disk command CM 2-18

Copy Logs to Floppy command CM 9-11copy output PJ 1-9Copy Virtual Printer command PJ 2-4CopyCount attribute PJ 1-9copying

documents to diskette CM 2-3documents to DOS diskette CM 2-4Documents to Floppy command CM 2-3,

CM 2-4, CM 2-5logs CM 9-11print-job data CM 9-8to tape CM 2-4, CM 2-5

copying to diskette CM 2-3copypage PD 1-16core interchange fonts IS 4-11correcting color calibration CM 15-9corruption problems

database CM 2-28software CM 2-26

cover pageAdobePS driver SJ 4-27Macintosh, LaserWriter 7.x driver SJ

4-10Macintosh, LaserWriter 8.x driver SJ

4-15Create Input Profile command CM 6-2Create Output Profile command CM 6-2Create Profiles command CM 6-2Create Virtual Printer command PJ 2-2, DC

7-1creating print queue, Novell PJ 3-16creating profiles CM 6-2current transformation matrix (CTM) PD 1-1curves PD 1-25, PD 1-33curveto components PD 1-33custom fonts IS 4-12Customer Changeable Unit (CCU) IP 6-10–

IP 6-11, IP 6-20customer responsibilities IP 1-12, SJ 4-2–SJ

4-4, IP 8-2–IP 8-3customized forms DC 1-2customized forms, forms

customized DC 1-3cut sheet, converting IS 4-18Cycle Exceptions DC 5-8cycle up time DC D1-2, DC D1-7CycleExceptions attribute PJ 1-9CycleForm value DC 5-5CycleForms attribute PJ 1-9, DC 5-5–DC 5-8

Ddata

adding color IS 5-3flushing PD 1-21



INDEX

placement operators PD 3-2–PD 3-3streams SJ 2-5towers SJ 2-6transfer protocol PJ 3-5

Data 1 fonts IS 4-12data base mode PD 3-2

See also line modedata cables IP 7-1Data Control Interface Module (DCIM2) card

IP 2-5, SO 2-5data flows

AS/400 IS 10-5mainframe

MVS AFP IS 10-1MVS for remote printer IS 10-2VM IS 10-3VSE IS 10-4

PS/2 IS 10-5RS/6000 IS 10-6

data streams IP 1-8, SO 5-1, SO 5-5database

corruption CM 2-28date, setting CM 7-1DCF/Script IS 5-8Decomp DC 1-3Decomp Service Install Options screen DC

2-1decomposed forms

directory location DC 4-3, DC 6-3file formats DC A-1–DC A-4

decomposing Background Forms DC 5-3decomposing time

reducing PJ 5-13Decomposition Service

application examples DC 1-2–DC 1-4benefits DC 1-1, DC 1-6examples DC G-1–DC G-7installing

DOS DC 2-2overview DC 2-1Windows DC 2-1

overview DC 1-1Decomposition Service Tools, installing SJ

2-6, SJ 2-15default

font PD 1-3

user coordinate system PD 1-39–PD 1-41

default color rendering PJ 1-20default Grayscale PJ 1-23default router SJ 4-9default settings

resetting job ticketQuick Print for Windows NT 4.0 SJ

6-8Windows NT 4.0 (transparent SJ 5-15

defaultsJog command PJ 5-10media specifications PJ 4-2media values PJ 4-2media, setting CM 5-2options, listing CM 5-28scheduling policy PJ 3-12

defining forms, Novell PJ 2-9definitions, nonstandard PD 1-11–PD 1-12definitions, see sample printer definitionsDelete Accounting command CM 9-9Delete Color Calibration command CM

15-10, CM 15-11Delete Fonts command CM 10-4Delete Form command DC 7-4Delete Forms command CM 11-4Delete Logs command CM 9-12delete output profile command CM 6-3Delete Virtual Printer command PJ 2-4, DC

7-4deleting

accounting files CM 9-9fonts CM 10-4forms DC 7-4, CM 11-4logs CM 9-12virtual printers DC 7-4

Deleting Input|Output profiles CM 6-3delimiters, EOF PD 1-18–PD 1-20delimiting PostScript jobs PD 1-17–PD 1-18delivery instructions, print job SJ 6-14delivery requirements IP 6-16–IP 6-18DELTA configurations IP 6-3demo mode, VIPP PD 3-3developer IP A+6, SO 6-6developer waste container, replacing RM

6-1–RM 6-4



INDEX

Device Control command set SJ 3-6device-dependent operators TG 5-3devices

coordinates PD 1-1–PD 1-2, PD 1-32dependent features PD 1-29–PD 1-33

DFA IP 1-4, SO 1-4DFA group number PJ 1-10DFA maximum set size PJ 1-10DFA support IS 1-2, IS 5-14diagnostic data, gathering CM 2-18Diagnostic Lockout feature IS 6-2diagnostic tools IP 1-12, SO 1-5dialog box options, customizing Quick Print

for Windows NT 4.0 SJ 6-25dictionary operators

Execution PD 1-11IdleTime PD 1-10Printer PD 1-10–PD 1-11Server PD 1-9Status PD 1-10System PD 1-8User PD 1-8–PD 1-9

dimensionschangeout cart IP 6-11printers IP 6-6–IP 6-9

Direct Bus and Tag SJ 2-7directories

forms locationdecomposed forms DC 4-3, DC 6-3non-default DC B-1

installationWindows DC 2-2

Xcat jobs default DC 6-12directory

queue PJ 3-17required, DocuPrint file system PJ 6-3

Disable Modem command CM 2-31Disable Remote Shell command CM 2-32disk space, installation requirements SJ 2-1diskette

copying documents to CM 2-3copying documents to DOS CM 2-4ejecting CM 2-2formatting CM 2-2installing licenses from CM 2-17installing software updates from CM 2-7

listing files on CM 2-3printing documents from CM 2-9

diskettes IP A+7, SO 6-7contents, listing CM 2-3ejecting CM 2-2formatting CM 2-2

Display Billing Meters command CM 8-8display monitor IP 5-9, IP 5-10displaying

date CM 7-1logs CM 9-10PDL code CM 2-6time CM 7-1

displaying PDL code CM 2-6displaying virtual printers PJ 2-5disposition attributes

examples DC 3-7, DC 4-3, DC 7-3Mask, Form formats DC 3-3–DC 3-6Tiff/G4, ByteCode formats DC 3-2values DC 3-1, DC 7-3

dividing print jobs PJ 5-1document attributes PJ 1-1Document Feeding and Finishing

Architecture, see DFADocument Structure Editor (DSE) DC 9-1Document Structuring Conventions (DSC)

PJ 4-2document types IS 1-8documentation IP C-1

AS/400 IP F-28IBM channel connections IP 7-3MVS references IP F-20

DocumentID attribute PJ 1-11DocumentName attribute PJ 1-11documents

attributes PJ 1-1changing PJ 1-29list PJ 1-2see also attributesshowing PJ 1-30

cancelling PJ 3-3changing full color to highlight color SJ

6-19Decomp Service examples DC 1-1–DC

1-4forwarding PJ 3-3



INDEX

holding PJ 3-3ID number, determining PJ 1-29ineligible PJ 3-8listing PJ 3-7–PJ 3-10master DC 4-1promoting PJ 3-3, PJ 3-11releasing PJ 3-3scheduling PJ 3-12stapling

long PJ 5-9order PJ 5-10

status, determining PJ 3-7–PJ 3-10DocuPrint NPS Setup window

Quick Print for Windows NT 4.0accessing SJ 6-9image shift SJ 6-12imaging and job setup options SJ

6-10–SJ 6-13job notes SJ 6-13–SJ 6-14paper stocks SJ 6-15–SJ 6-17

Windows NT 4.0 (transparent)advanced PostScript options SJ

5-31–SJ 5-36copy count SJ 5-17finishing features SJ 5-19highlight color SJ 5-27–SJ 5-31image shift SJ 5-18job notes SJ 5-19–SJ 5-21overview SJ 5-16page orientation SJ 5-17page range SJ 5-17paper stocks SJ 5-21–SJ 5-24paper weight SJ 5-18preferences SJ 5-36programming, Main Stock SJ 5-18sides to image SJ 5-17special pages SJ 5-25–SJ 5-27

DocuPrint system components IP 1-8DOS

formmrg tool DC 6-13getg4 tool DC 9-1–DC 9-2installing Decomp Services DC 2-2reprint tool DC 6-13xcat tool DC 6-15xmerge tool DC 6-14

DOS client software

installing SJ 2-2removing SJ 2-6

double byte fonts PD 1-3drilled paper

Quick Print for Windows NT 4.0 SJ 6-16Windows NT 4.0 SJ 5-24

drivers, PCL 5c PD 2-17drivers, Xerox SJ 1-1drives

cartridge tape IP 5-9, IP 5-10disk IP 2-3, SO 2-4DVD-ROM IP 2-3, SO 2-4

dry inkadding RM 5-1–RM 5-4color IP 6-10stains RM 5-12toner IP A+6, SO 6-6

dry ink distribution PD 1-14dry ink waste container

replacing for 4850 RM 6-4–RM 6-6replacing for Starlight RM 6-4–RM 6-8

DSE (Document Structure Editor) DC 9-1dual feeder IP 6-20Dual Mode SO 5-1dual stacker IP 3-9, IP 6-6–IP 6-8, SO 3-9dual stacker trays, unloading RM 2-1Dump Accounting command CM 9-7Duplex commands, PCL PD 2-9duplex path IP 3-16, SO 3-17duplex printing PD 2-8, PJ 5-11

specifyingWindows NT 4.0 (transparent) SJ

5-17duplexing with MultiSet PJ 5-11DVD-ROM drive IP 2-3, SO 2-4dynamic media, setting PJ 4-5–PJ 4-6dynamic plex changes PJ 7-2

EEarlyStaple option PJ 5-9EBCDIC PD 3-2edge deletion SJ 4-40eexec operator PD 1-8Eject CD-ROM command CM 2-2Eject CDROM command CM 2-2Eject Floppy command CM 2-2



INDEX

ejecting a CD-ROM CM 2-2ejecting a diskette CM 2-2electrical

specifications IP 5-1–IP 5-3, IP 6-1–IP 6-4

electrical connection, third-party finishing devices IP 3-15, SO 3-15

electronic counter RM 2-2elevator tray fault DC D1-7ElideHeader attribute PJ 1-11Elixir products IS 4-3–IS 4-5embedding images PD 1-34, PD 1-43Enable Modem command CM 2-30Enable Remote Shell command CM 2-31enabling

lpr security option CM 12-5EndOfRun command PJ 5-4–PJ 5-7EndOfSet command PJ 5-3–PJ 5-4, PJ 5-6–

PJ 5-7engine

write-black PD 1-15–PD 1-16, PD 1-26write-white PD 1-15–PD 1-16

enhancement, resolution PD 1-12–PD 1-16entering commands CM 1-1Enterprise Printing Option SJ 3-3entry, bindery PJ 3-16environmental requirements IP 6-4EOBs, printing IS 1-8EOF delimiters PD 1-17–PD 1-20eofill TG 5-5erasepage operator PJ 5-2error

limitcheck PD 1-31undefined command PD 1-18

error condition, restarting printer TG 7-4error handling SJ 4-18, SJ 4-30error messages, Client Software installation

TG 2-2error page DC 6-5, DC 6-14, DC 6-18ESCON connection SJ 2-8estimates, rough performance DC D1-2Ethernet IP 2-5, SO 2-5

AS/400 SJ 2-12configurations using IP 1-5, SO 5-2connections SO 4-4–SO 4-5description SO 4-6

framing type SJ 4-12mainframes SJ 2-10requirements SJ 4-15RS/6000 SJ 2-14

Examine Document command CM 2-6Example DC 7-6Excel, Microsoft DC 4-4exception pages

Quick Print for Windows NT 4.0 SJ 6-21–SJ 6-22

ExceptionPages attribute PJ 1-11Execution Dictionary operators PD 1-11exitserver operator PD 1-20, PD 1-22explanation of benefits, see EOBsextensions, proprietary PostScript PD 1-16

Ffast scan direction PD 1-35, PD 1-38fault code display IP 3-5, SO 3-5fax resolution PD 1-34FDOCA SJ 2-4features, device dependent PD 1-29–PD

1-33feedback, job status SO 4-5–SO 4-6feeder

high-capacity IP 3-8, SO 3-8tray IP 3-2, IP 3-8, SO 3-2, SO 3-8

feeder tray attributes, setting CM 5-4feeder trays RM 1-1feeder trays, clearing faults TG 4-1–TG 4-5feeder, establishing PJ 4-1feeding options IS 5-14

specifications IS 7-3fields, form references DC 8-7–DC 8-9file

name, static form DC G-7PPD PD 1-28–PD 1-29

file formats, decomposed forms DC A-1–DC A-4

file lockssetting maximum CM 4-6

File of Filesdifferent directories DC B-1multiple print jobs (Windows XCat) DC

6-11XCat DC 4-9–DC 4-11



INDEX

XMerge DC 4-11–DC 4-13, DC 6-5file operator PD 1-31, PJ 6-1file server SJ D-13file server support CM 4-6filename extensions

.pg DC A-1

.tif DC A-1filenames, File of Files

carriage returns DC 4-13space character DC 4-11, DC 4-13

filesaccounting, maintaining CM 9-1–CM 9-9backing up CM 2-9backing up Xerox CM 2-10NPS log, maintaining CM 9-9referenced content

cleanup PJ 6-7placement PJ 6-2shared resource PJ 6-2single-use PJ 6-2

referencing PJ 6-3restoring backed-up site CM 2-10restoring Xerox CM 2-11specifying for printing

Macintosh LaserWriter driver 8.x SJ 4-10, SJ 4-22

TIFF PJ 6-4transferring PJ 6-3

fill TG 5-5fill operator PD 1-24–PD 1-26FillOrder TIFF tag DC E-1filter operator PD 1-21, PD 1-34finishing device maximum PJ 1-10finishing features

Windows NT 4.0 (transparent) SJ 5-19finishing options IS 5-14

specifications IS 7-4–IS 7-5FirstComeFirstServed attribute PJ 3-13Fixed Document Reference file DC 6-15FlipSide attribute PJ 1-12floating-point operators PD 1-1floor leveling IP 6-15floppy

see diskettefloppy, see disketteflushfile TG 5-2

flushing input data PD 1-21FOCA SJ 2-4font installation commands IP 2-8, SO 2-8Font Thicken parameter CM 5-31fonts SJ 2-3

Adobe Type 1 IP 2-8, SO 2-8cache size PD 1-33Chinese PD 1-3consistency PD 1-16converting IS 4-13creating PD 1-6default PD 1-3deleting CM 10-4double byte PD 1-3downloading IS 4-10error messages PD 1-22HP PCL CM 10-3HP PCL 5 PD 2-5IBM AFP collection IS 4-10–IS 4-12installing CM 10-2Intellifont PD 2-4list, printing CM 10-8listing

all available CM 10-7disk CM 10-6printer controller CM 10-6

loading PD 1-4, PD 1-6MICR PD 1-3, PD 2-4name, specifying PJ 1-2PCL IP 2-8, IP 2-9, SO 2-8, SO 2-9printer-resident IS 4-10sample, printing CM 10-8selecting PD 2-4size, specifying PJ 1-2Type 0 PD 1-3

installing PD 1-3Type 1

installing PD 1-2using PD 1-5–PD 1-8

Type 3 PD 1-3installing PD 1-3

user-defined PD 1-4using IS 4-10–IS 4-13Xerox CMC-7 IS 5-12Xerox E13B IS 5-12

fonts, MICR PD 2-4



INDEX

fonts, PCLsample, printing CM 10-9

form DC 6-2form definitions, (FormDefs) SJ 2-2form files

ByteCode format DC A-1–DC A-2TIFFg4 format DC A-1–DC A-2

Form format DC 3-3–DC 3-6form references

applications DC 8-7–DC 8-9GetTiff macro DC 8-4–DC 8-7overview DC 8-1run exec macro DC 8-1–DC 8-3

form. DC 6-2Format Floppy command CM 2-2formatting

diskette CM 2-2FormMerge dialog DC 6-4formmerge tool

overview DC 1-4SunOS/Solaris DC 6-17Windows DC 6-3–DC 6-5

formmrg tool (DOS) DC 6-13forms DC 1-2, DC 6-2

background PJ 1-8, PJ 1-9backing up, restoring DC F-1color DC 3-1, DC 3-6, DC 5-1creating DC 4-2Decomp Service benefits DC 1-1definition DC 3-6deleting DC 7-4, CM 11-4directory location

non-default DC B-1listing DC 5-3, DC 7-4managing CM 11-1Mask, Form structures DC 3-3–DC 3-4naming, Novell PJ 2-9overlaying variable data

DOS formmrg tool DC 6-13SunOS/Solaris formmerge DC 6-17

printing controller-residentWindows FormMerge DC 6-3–DC 6-5Windows Reprint DC 6-2–DC 6-3

printing samples CM 11-3printing single DC 7-6static DC G-6

virtual printer setup DC 3-7formulas

Decomp PPM DC D1-2PPM DC D1-2

Forward Document command PJ 3-5Forwarded From attribute PJ 1-12Forwarded To attribute PJ 1-12FrameMaker software, image quality SJ

4-40frames

static data DC 4-7variable data DC 4-3

framing type, Ethernet SJ 4-12FTP login DC 4-12, DC C-1FTP PC/TCP SJ 2-2full color printing IS 5-2full color vs. highlight color PD 1-17fuser

agent IP A+6, SO 6-6shield IP A+6, SO 6-6

fuser agent, adding RM 4-1–RM 4-5

GGDDM (Graphical Data Display Manager) IS

4-2Generate PostScript dialog DC 6-12getg4 tool

DOS DC 9-1–DC 9-2overview DC 1-4SunOS/Solaris DC 9-3

GetTiff capabilities PJ 6-5GetTiff limitations PJ 6-7GetTiff macro DC 1-5, DC 8-4–DC 8-7GetTiff macro, referencing files PJ 6-4–PJ

6-5gfi directories, removing CM 13-3glazing TG 4-3GMC PrintNet IS 4-8GOCA (Graphics Object Content

Architecture SJ 2-4GOCA (Graphics Object Content

Architecture) IP 1-8, SO 5-5GOCA image resolution IS 4-16Golden Print Job masters SJ 2-5graphic borders SJ 4-40graphical user interface CM 1-1



INDEX

graphicsbitmap PD 1-5, PD 1-14raster PD 2-3vector PD 2-2

graphics, Windows NT 4.0compressing SJ 5-32printing in color SJ 5-33

gray shadingsetcolorscreen TG 5-3setscreen TG 5-3settransfer function TG 5-4transfer function TG 5-4

gray values, rendering PD 1-27Group4Options TIFF tag DC E-1

Hhalftoning PD 1-12, PD 1-27Halt System command CM 3-3handwritten test masters PD 1-1–PD 1-2hard disk, Xerox Client Software

requirements TG 2-2hardware SJ 3-1

components IP 5-8network options SO 4-4–SO 4-5printer controller, installing IP 8-3specifications IP 5-8–IP 5-9, IP 6-19–IP

6-20supported IP 1-11–IP 1-12

HCF IP 6-8–IP 6-9HCU IP 1-7, IP 5-7, IP 5-10, SO 5-4HCU (Host Control Unit) SJ 3-1header pages, suppressing PJ 1-11heat dissipation IP 6-19–IP 6-20Held List PJ 3-3Hewlett-Packard

PCL fonts IP 2-8, IP 2-9, SO 2-8, SO 2-9high-capacity feeder IP 3-8, SO 3-8High-Capacity Stitcher/Stacker PJ 5-8highlight color IP 6-19, DC A-2

color substitution SO 1-8conversion from full color SO 1-7creation SO 1-7mapping PJ 1-16matching options

Macintosh AdobePS driver SJ 4-28Macintosh LaserWriter 8.x driver SJ

4-16mismatch with loaded ink color

Quick Print for Windows NT 4.0 SJ 6-19, SJ 6-20

results compared SJ 3-59Windows NT 4.0 (transparent) SJ

5-29overview SO 1-7process, Macintosh LaserWriter driver

8.x SJ 4-39Quick Print for Windows NT 4.0

changing full color to highlight color SJ 6-19

overview SJ 6-18–SJ 6-20selecting color mismatch action SJ

6-19, SJ 6-20specifying color SJ 6-19

rendering attribute SO 1-8screens SO 1-7Windows NT 4.0 (transparent)

overview SJ 5-27–SJ 5-31selecting SJ 5-28selecting color mismatch action SJ

5-29selecting extraction color SJ 5-29selecting rendering algorithm SJ 5-30

highlight color mismatch attribute PJ 1-14highlight color vs. full color PD 1-17HighlightColor attribute PJ 1-13HighlightColorRendering attribute PJ 1-13,

PJ 1-14–PJ 1-15Hold attribute PJ 1-15Hold Documents command PJ 3-6Hold Reason attribute PJ 1-15holding print jobs PJ 3-3HorizontalImageShift attribute PJ 1-15HorizontalImageShiftForBack attribute PJ

1-15Host Channel Unit IP 1-7, SO 5-4host ID

showing CM 2-13hostname attribute PJ 3-6HP PCL 5 fonts PD 2-5HP PCL fonts, installing CM 10-3



INDEX

IIBM AFP Font Collection IS 4-2IBM AFP Group 3 page printer SO 5-1IBM AFP Windows Printer Driver IS 4-3IBM Group 3 compatible printers IS 1-1IBM Open Blueprint architecture SJ 2-4IBM, outline fonts SO 5-7ICC profile SJ 2-21ID number, document PJ 1-30IdleTime Dictionary operators PD 1-10IEEE

802.3 IP 1-9, IP 1-10, SJ 4-15802.5 IP 1-9, IP 1-10

IEEE 802.3 SJ 4-15illegal characters, ignoring PD 1-18–PD 1-20image

characteristics PD 1-15coordinates, transforming PD 1-40data

order, optimizing PD 1-35–PD 1-40embedding PD 1-34, PD 1-43orientation PD 1-36overlaying DC G-4post-enhancement PD 1-14pre-enhancement PD 1-14quality, maintaining PD 1-12–PD 1-16,

PD 2-2–PD 2-3rendering PD 1-37rotating PD 1-36–PD 1-37scaling PD 1-40–PD 1-43scanning PD 1-35–PD 1-40

image editors DC 9-1Image Lift printing DC G-3image shift

horizontalQuick Print for Windows NT 4.0 SJ

6-12Windows NT 4.0 (transparent) SJ

5-18vertical

Quick Print for Windows NT 4.0 SJ 6-12

Windows NT 4.0 (transparent) SJ 5-18

image shifting, mixed plex PJ 7-8ImageLength TIFF tag DC E-1

imager parameters CM 5-29–CM 5-32imager parameters, PCL CM 5-33–CM 5-35images IS 4-16

ensuring proper printingGetTiff macro DC 8-4run exec macro DC 8-2

overlayed variable data DC 5-1–DC 5-4, DC 7-2

positioning (Quick Print for Windows NT 4.0) SJ 6-12

print quality IS 4-16PSF conversion IS 4-16quality considerations

Macintosh LaserWriter driver 8.x SJ 4-40

quality, maintaining PJ 1-14TIFF PJ 6-4

images, GOCA IS 4-16ImageWidth TIFF tag DC E-1implementation limits PD 1-30ineligible documents PJ 3-10Infoprint Manager

AIX IP E-5, IP F-30Windows 2000 IP E-4, IP F-29Windows NT IP E-4, IP F-29

information button IP 3-5, SO 3-5initgraphics operator PJ 5-2input group migration, IPS PJ 2-1, PJ 2-11input profiles CM 6-1–CM 6-6input resolution IS 4-13input trays

preparing IS 6-1specifications IS 7-3

input trays, loading RM 1-1insertion order PJ 3-1Install Feature License command CM 2-16Install FlexLicense from Floppy command

CM 2-17Install Fonts from CDROM command CM

10-2Install Fonts from Floppy command CM 10-2Install License command (obsolete) CM 2-18Install PCL Fonts from Floppy command CM

10-3Install Remote Update command CM 2-7Install Update from CDROM command CM



INDEX

2-7Install Update from Floppy command CM 2-7installation

hardware IP 8-1network checklist SJ 4-8–SJ 4-14planning checklist SJ 4-4–SJ 4-7preparation SJ 4-1–SJ 4-14process IP 8-1–IP 8-2timeframes SJ 4-5Xerox responsibilities SJ 4-2

installingcommand sets PD 3-4Decomposition Service Tools SJ 2-6, SJ

2-15fonts CM 10-2NFS CM 13-1PostScript drivers

Windows NT 4.0 (transparent) SJ 5-1–SJ 5-7

PPD file SJ 2-5, SJ 2-15system, Windows NT 4.0 SJ 5-1–SJ 5-7Type 0 fonts PD 1-3Type 1 fonts PD 1-2Type 3 fonts PD 1-3verifying

PC-DOS SJ 2-5UNIX SJ 2-12XDOD/DigiPath CM 13-2

Xerox Client Software SJ 2-10installing bypass transport RM 7-3–RM 7-5installing Decomposition Service

DOS DC 2-2overview DC 2-1Windows DC 2-1

instruction labels IP 3-6, SO 3-6insurance

examples IS 1-3insurance quote customized DC 1-4Intellifont fonts PD 2-4interface

mechanical IP 3-13, SO 3-13Internet Printing Protocol (IPP) SJ 7-1interrupting print jobs PJ 3-14invisible strokes, setlinewidth TG 5-5IOCA (Image Object Content Architecture)

IP 1-8, SO 5-5, SJ 2-5

IOCA colors SO 5-7IOCA Replicate and Trim SO 5-6IOT (input/output terminal) SJ 3-2IP

address SJ 4-8broadcast address SJ 4-9Netmask SJ 4-8

IPDS SJ 2-5, IS 6-2, PJ 7-1channel switching PJ 3-15simplex PJ 8-3

IPDS data streams IP 1-8, SO 5-1, SO 5-5IPDS input resolution PJ 1-16IPDS printing

starting PJ 3-15stopping PJ 3-15

IPDS virtual printer PJ 2-1IPDSContinuousEmulation IS 4-18IPP SO 1-5IPP, see Internet Printing ProtocolIPS input group migration PJ 2-1, PJ 2-11IPX internal network number, specifying SJ

4-12ISIS products IS 4-6–IS 4-7ISOLatin1Encoding operator PD 1-8

JJES2

FSS statement parameters IP F-3–IP F-5Initialization Dataset commands example

IP F-5printer definitions IP E-1

JES3configuring IP F-5FSS statement parameters IP F-6–IP F-8initialization dataset commands example

IP F-8job

statuscommand SO 4-6feedback SO 4-5–SO 4-6

submissionmethods SO 4-2–SO 4-5

job description ticket (JDT) PD 3-2job IDs

resetting CM 2-12Job Message sheet PJ 1-11



INDEX

job message, banner pageQuick Print for Windows NT 4.0 SJ 6-13–

SJ 6-15Windows NT 4.0 (transparent) SJ 5-21

job names, Quick Print for Windows NT 4.0 SJ 6-24

job notesQuick Print for Windows NT 4.0 SJ 6-13–

SJ 6-14Windows NT 4.0 (transparent) SJ 5-19–

SJ 5-21Job Pool Manager (JPM) PJ 3-2job processing

stopping and starting CM 3-5job sizes PJ 3-1job status

determining, platforms compared SJ 1-7methods SJ 1-6telnet connections SJ 1-6

job ticketsMacintosh, AdobePS driver SJ 4-34Quick Print for Windows NT 4.0

generic SJ 6-24job note summary information SJ

6-14loading SJ 6-4–SJ 6-5resetting to defaults SJ 6-8saving SJ 6-6

Windows NT 4.0 (transparent)opening SJ 5-11–SJ 5-12resetting SJ 5-15–SJ 5-16saving SJ 5-13–SJ 5-14

jobsarrival PJ 3-2canceling PJ 3-3constructing PJ 5-1copying PJ 5-11delivery order PJ 5-8dividing PJ 5-1forwarding PJ 3-3holding PJ 3-3insertion order PJ 3-1interrupting PJ 3-14listing PJ 3-3Macintosh PJ 4-2managing large PJ 5-8

Novell PJ 3-16parameters, PSERVER PJ 3-17print order PJ 3-1prioritizing PJ 3-1priority PJ 3-1promoting PJ 3-11queues

remote printer PJ 3-18releasing PJ 3-3, PJ 3-11–PJ 3-12reordering PJ 3-2scheduling PJ 3-2sets

delineating PJ 5-2stapling PJ 5-10stapling runs PJ 5-10stapling, multiple PJ 5-3

starting PJ 3-13stopping PJ 3-14submitting PJ 4-2ticket PJ 4-2

Jog command PJ 5-10–PJ 5-11JPEG compressed IOCA SJ 2-5

Kkeyboard IP 2-5, IP 2-7, IP 5-9, IP 5-10, SO

2-5, SO 2-7keyboard, cleaning RM 8-1key-value pairs

availability, determining PJ 5-2device dictionary PJ 5-2multiple calls PJ 5-2

Kill command CM 3-6

Llabels

selecting IP A+2, SO 6-2LAN

Ethernet SO 4-6Token Ring SO 4-6

LAN network number, specifying SJ 4-12language button IP 3-6, SO 3-6LaserWriter PD 1-22LaserWriter drivers

version 7.xselecting SJ 4-2submitting print jobs SJ 4-9–SJ 4-10



INDEX

version 8.xselecting SJ 4-3submitting print jobs SJ 4-10–SJ 4-40

LCDS commands, converting PD 3-2Level 2 operators PD 1-21leveling, floor IP 6-15license, software IP 8-4, SO 1-6license, VIPP PD 3-3licenses

diagnostic CM 2-15displaying remaining days CM 2-17installing feature CM 2-16installing from diskette CM 2-17showing status CM 2-17

licenses, software CM 2-15licensing commands CM 2-15–CM 2-18lights, feeder trays RM 1-1limit

path PD 1-31storage object size PD 1-33virtual memory PD 1-31

limitations, color IS 9-1limitcheck error PD 1-31line mode PD 3-2line mode extension PD 3-3–PD 3-4lines and borders, adding color IS 5-8lines, zero-width PD 1-24List CDROM Fonts command CM 10-6List Color Calibrations command CM 15-10List Documents command PJ 3-7–PJ 3-10,

DC D1-9List Executives command CM 1-4, CM 8-8List Files on CDROM command CM 2-8List Floppy Fonts command CM 10-6List Fonts command CM 10-6, CM 10-7List Forms command CM 11-2

performance measurements DC D1-7syntax and example DC 7-4verifying forms DC 5-3

List Logs command CM 9-10List Options command CM 5-28List Sample Documents command CM 8-5List Virtual Printers PJ 2-5List Virtual Printers command PJ 2-5, DC 7-5List Volumes command CM 8-2listing

default options CM 5-28files on CD ROM CM 2-8files on diskette CM 2-3files on tape CM 2-5fonts

disk CM 10-8printer controller CM 10-8

forms DC 5-3, DC 7-4logs CM 9-10virtual printers DC 7-5

listing commands CM 1-1listjob command SJ 1-7, SJ 3-35listq command SJ 1-7, SJ 3-38lists, job

Active PJ 3-7Held PJ 3-7

loaded font command set SJ 3-7loading fonts PD 1-4, PD 1-6loading job tickets


loading, feeder trays RM 1-1logging in CM 4-2, CM 4-6logos PD 1-5logs

copying to floppy CM 9-11deleting CM 9-12displaying CM 9-10listing CM 9-10printing CM 9-13

lpc command (UNIX) SJ 3-57lpd commands SJ 4-10lpq command SO 4-5

determining job status SJ 1-7DOS SJ 3-53UNIX SJ 3-54

lprprint utilities, enabling SJ 2-17–SJ 2-19security option, enabling CM 12-5Solaris SJ 2-18SunOS SJ 2-17

lpr command SO 4-5, SJ 3-41color mismatch results SJ 3-59overview SJ 1-4syntax DC 5-1virtual printer assignment DC 5-5



INDEX

lpr commands SJ 4-10lprm command SJ 3-55lpstat command SJ 1-6LU 6.2 connection SJ 2-12

MMacintosh client software SJ 2-7Macintosh drivers

highlight color printing SJ 4-39image quality SJ 4-40monitoring and controlling printing SJ

4-39selecting AdobePS driver SJ 4-6–SJ 4-9selecting LaserWriter driver

version 7.x SJ 4-1–SJ 4-2version 8.x SJ 4-3–SJ 4-6

submitting print jobsAdobePS driver SJ 4-22–SJ 4-38Laser 7.x driver SJ 4-9–SJ 4-10LaserWriter 8.x driver SJ 4-10–SJ

4-40Macintosh jobs, submitting PJ 4-2Macintosh platforms DC 1-5macro, GetTiff PJ 6-4–PJ 6-5macros

GetTiff DC 1-5, DC 8-4–DC 8-7listed DC 1-5run exec DC 1-5, DC 8-1–DC 8-3

magnetic ink character recognition see MICR

Mail Merge Helper dialog DC 4-4–DC 4-6mainframe

AFP data flows IS 10-1–IS 10-5connections SJ 2-7–SJ 2-11

maintaining pictorial quality PJ 1-14maintenance

ongoing IP 8-4–IP 8-5routine IP 8-4–IP 8-5

maintenance services RM 9-1–RM 9-3man pages SJ 2-12–SJ 2-13managing

long jobs PJ 5-8print queue, Novell Netware PJ 3-16virtual printers PJ 2-1

Managing IPDS jobs PJ 8-1manufacturing application, example IS 1-6

map colorhighlight color algorithm SJ 4-16, SJ 4-28print and lpr command color match/

mismatch results SJ 3-59mapping user coordinates PD 1-1–PD 1-2mapping, color

automatic rendering PJ 1-15highlight PJ 1-14–PJ 1-15

MarkForm facility IS 5-10Mask format DC 3-3–DC 3-6master documents DC 4-1master, PostScript PD 1-27masters, multiple PJ 6-1matching media PJ 4-1, PJ 4-5math operators PD 1-1MAU (modular access unit) SJ 2-11maximum

retry number PJ 1-21Maximum File Locks

setting CM 4-6measuring performance DC 7-7, DC D1-1–

DC D1-11mechanical interface IP 3-13, SO 3-13media

criteria PJ 4-1default values PJ 4-1match

complete PJ 4-6none PJ 4-6partial PJ 4-6tolerance PJ 4-6

specificationsdynamic PJ 4-5–PJ 4-6static PJ 4-1submitter PJ 4-2

static, determining PJ 4-2virtual printer PJ 4-3weight PJ 4-5

Media attribute PJ 1-17media list PJ 4-3media selection precedence, PCL PD 2-13media setting default CM 5-7media, determining specifications DC 6-8,

DC 7-8medical center example DC 5-2–DC 5-4memory, virtual PD 1-20



INDEX

mergecommands, inserting DC G-7document, printing DC G-8

Merge Pages dialog DC 6-7merging files DC 4-8message display IP 3-4, SO 3-4messages

Client Software installation TG 2-2font substitution error PD 1-22paper jams TG 4-6stdout PD 1-22telnet CM 1-4

meter, billingreading IP 8-5reporting IP 8-5

MICR IS 5-12applications IS 1-2, IS 5-11–IS 5-14fonts

clearing from memory CM 14-2deleting CM 14-2

fonts for NPS CM 14-1resources IS 5-13security IS 5-14, CM 14-2tasks for NPS CM 14-1Xerox Check Performance Guarantee IS

5-11Xerox CMC-7 font IS 5-12Xerox E13B font IS 5-12

MICR font floppy PD 1-3, PD 2-4MICRMode attribute PJ 1-17Microsoft Word

data merge example DC G-5inserting merge commands DC G-7

migrating applications IS 4-1mixed plex PJ 7-1

counting pages PJ 7-4dynamic plex changes PJ 7-2image shifting PJ 7-8introduction PJ 7-1other attributes PJ 7-9side selection for PCL PJ 7-7static plex changes PJ 7-3

mixed plex, simulated PostScript PD 1-21mixing plex types PJ 5-12MO:DCA-P (Mixed Object Document

Content Architecture for Presentation

IP 1-8, SO 5-5MODCA data streams SJ 2-5modem

connecting CM 2-30disabling CM 2-31enable TG 1-2enabling CM 2-29switch settings CM 2-30

module mobility, third-party finishing devices IP 3-14, SO 3-14

monitor IP 5-9, IP 5-10monitor, cleaning RM 8-1monitoring printing, LaserWriter version 8.x

SJ 4-39Mount CDROM command CM 12-2, CM

12-3Mount Floppy command CM 12-3mouse IP 2-7, IP 5-9, IP 5-10multiple

copies PJ 5-11jobs, removing reference files PJ 6-8masters PJ 6-1setpagedevice calls PJ 5-1

multiple master font PD 1-4MultiSet

copying PJ 5-11duplexing PJ 5-11EarlyStaple option PJ 5-9Jog command PJ 5-10–PJ 5-11minimizing decomposition time PJ 5-13setpagedevice entries PJ 5-2specifying multiple copies PJ 5-11

MVSchannel attachment IP E-1–IP E-3TCP/IP connection IP F-1–IP F-20

MVS print flow IS 10-1

Nnames

document PJ 1-19referenced content files PJ 6-1–PJ 6-2sender PJ 1-11shared resource files PJ 6-2single-use files PJ 6-2virtual printer PJ 1-19, PJ 2-2

native mode PD 3-1, PD 3-2



INDEX

Netware PJ 3-16NetWare servers, Novell, attaching printers


networkAppleTalk SJ 4-10communication

overview SO 4-3–SO 4-5protocols SO 4-3–SO 4-5

communications SO 4-4–SO 4-5configuration IP 1-11Ethernet IP 1-9, IP 1-10installation checklist SJ 4-8–SJ 4-14multiple connectivity SO 4-7Novell SJ 4-11Token Ring IP 1-9, IP 1-10, IP 8-1

network configurationsAS/400 IP F-21MVS IP F-2

network interface requirements SJ 4-14networks, communicating SJ 1-5–SJ 1-6newsletters, mailers, forms, pricing lists DC

1-2NFS

configuring CM 13-2installing CM 13-1

no media match PJ 4-6nonstandard definitions PD 1-11–PD 1-12Not Ready Signals on the IPDS Host PJ 8-4Notify flag PJ 3-18Novell

banner pages PJ 3-18data transfer PJ 3-16forms PJ 2-9jobs, queuing PJ 3-16PCONSOLE PJ 3-16print server PJ 3-17PSERVER PJ 3-17remote printer PJ 3-18RPRINTER PJ 3-18

Novell implementation, troubleshooting TG 3-1–TG 3-3

Novell NetWareconnectivity requirements SJ 4-14information SJ 4-11installation information SJ 4-11–SJ 4-13

PCONSOLE SJ D-2print queues SJ D-1–SJ D-2, SJ D-10, SJ

D-12PSERVER SJ 4-11, SJ D-3–SJ D-5, SJ

D-6–SJ D-10, SJ D-13remote printer (RPRINTER) SJ 4-12, SJ

D-5–SJ D-8, SJ D-11–SJ D-13virtual printers SJ 4-12, SJ D-4, SJ D-10,

SJ D-12Novell network CM 4-1NPS log files, maintaining CM 9-9number

EndOfSet command PJ 5-3–PJ 5-4

OObjectSize attribute PJ 1-18OCA colors SO 5-7OCAs (Object Content Architectures) SJ 2-4offset stacking facility IS 5-10OffsetPerCopy attribute PJ 1-18OffsetPerJob attribute PJ 1-18offsetting sets PJ 5-11OGL (Overlay Generation Language) IS 4-2Olympics, 1996

Background Form use DC 5-1Decomp Service use DC 1-2

online and offlineswitching IPDS channel PJ 3-15

OPC (Obtain Printer Characteristics) command SJ 3-9

opening job ticketsWindows NT 4.0 (transparent) SJ 5-11–

SJ 5-12operating systems

requirements SO 4-4–SO 4-5operating systems supported IP 1-4, IP

1-11–IP 1-12, SO 5-1operator

accessing commands CM 1-2changing password CM 1-3

operator training SJ 4-3, RM 9-2operators

#copies PD 1-9charpath PD 1-21data placement PD 3-2–PD 3-3dictionary



INDEX

Execution PD 1-11IdleTime PD 1-10Printer PD 1-10–PD 1-11Server PD 1-9Status PD 1-10System PD 1-8User PD 1-8–PD 1-9

eexec PD 1-8exitserver PD 1-20, PD 1-22file PD 1-31fill PD 1-24–PD 1-26filter PD 1-21, PD 1-34floating-point PD 1-1ISOLatin1Encoding PD 1-8obsolete PD 1-33pathforall PD 1-33PostScript Level 2 PD 1-21rotate PD 1-37, PD 1-41scale PD 1-40SetCacheDevice PD 1-32setfileposition PD 1-21setflat PD 1-25setgray PD 1-28setlinewidth PD 1-23, PD 1-24setscreen PD 1-32stroke PD 1-23–PD 1-24

operatorseq string PJ 6-3optimized scaling PD 1-41options

default, listing CM 5-28order

insertion PJ 3-1page PJ 4-4print PJ 3-1stapling PJ 5-8

ordering supplies IP A+14–IP A+15, SO 6-13–SO 6-14

orientation PD 1-32, PD 1-36Orientation attribute PJ 1-18Orientation TIFF tag DC E-1orphan data files, removing CM 12-6OS/390, see MVSOS/400 print flow IS 10-5outlets, power configurations IP 5-2, IP 6-2outline fonts SO 5-7, IS 4-12output limit, List Documents command PJ

3-7output pages PJ 1-9output profiles CM 6-1–CM 6-6output resolution IS 4-13output trays RM 2-1

specifications IS 7-4–IS 7-5OutputBin attribute PJ 1-18, PJ 3-9overlay command set SJ 3-7overlaying

images DC G-4overlaying TIFF images PJ 6-4overlays SJ 2-3, IS 4-15

adding color IS 5-7adding color shading IS 5-9

overstrike support SO 5-6overview IS 1-1–IS 1-9

processing SJ 3-2

Ppadding, bounding box PD 1-32page definitions (PageDefs) SJ 2-2page definitions, modifying Quick Print for

Windows NT 4.0 SJ 6-22page description language, see PDLpage device dictionary PJ 5-2, PJ 5-8page numbers, run exec macro DC 8-2page orientation, specifying

Windows NT 4.0 (transparent) SJ 5-17page origins

modifying for AFP IS 4-19page ranges, specifying

Quick Print for Windows NT 4.0 SJ 6-12Windows NT 4.0 (transparent) SJ 5-17

page segment command set SJ 3-7page segments SJ 2-3, IS 4-15Page Size command, PCL PD 2-12pagedevice PJ 5-12PageOrder attribute PJ 1-18, PJ 4-4PageRange attribue PJ 1-19pages

blankXCat DC 6-10XMerge DC 6-5, DC 6-7, DC 6-14, DC

6-18specifying, cycling method DC 5-5–DC

5-8



INDEX

superimposing multipleGetTiff macro DC 8-4, DC 8-5–DC 8-7run exec macro DC 8-2

XMerge caveats DC 6-5, DC 6-7, DC 6-14, DC 6-18

pages per minute (PPM) DC D1-1PagesDone attribue PJ 1-19PagesPerCopy attribue PJ 1-19paper

characteristics IP A+2, SO 6-2clearing jams

area 3 TG 4-14area 4 TG 4-15–TG 4-17area 5 TG 4-18–TG 4-19area 7 TG 4-22–TG 4-23area 8 TG 4-24area 9 TG 4-25areas 1 and 1A TG 4-10–TG 4-11areas 2 and 2A TG 4-12–TG 4-13areas 6 and 6A TG 4-20–TG 4-21bypass transport TG 4-28–TG 4-29stacker tray TG 4-26stitcher/stacker tray (areas A and B)

TG 4-27–TG 4-28conditioning IP A+4–IP A+5, SO 6-4–SO

6-5exit, third-party finishing devices IP 3-14,

SO 3-14feeder assembly RM 1-5jams

graphic display TG 4-6message display TG 4-6

misfeeds, frequent TG 4-3path

described IP 3-16, SO 3-16duplex IP 3-16, SO 3-17simplex IP 3-16, SO 3-16

recommended weight, grade IP A+2, SO 6-2

size IP A+1–IP A+3, SO 6-1–SO 6-3storing IP A+3, SO 6-3trays, see traystypes TG 4-1weight, specifying PJ 4-5

paper colorQuick Print for Windows NT 4.0 SJ 6-16,

SJ 6-17Windows NT 4.0 (transparent) SJ 5-24

paper sizeQuick Print for Windows NT 4.0 SJ 6-24Windows NT 4.0 (transparent) SJ 5-23

paper sourceMacintosh LaserWriter driver 7.x SJ 4-10

Paper Source command, implementing PD 2-10

Paper Source command, PCL PD 2-12paper stock

specifyingDOS xcat DC 6-15Quick Print for Windows NT 4.0 SJ

6-15–SJ 6-17SunOS/Solaris formmerge DC 6-19Windows NT 4.0 (transparent) SJ

5-21–SJ 5-24Windows XCat DC 6-8, DC 6-11

paper typeQuick Print for Windows NT 4.0 SJ 6-16Windows NT 4.0 (transparent) SJ 5-23

paper weightQuick Print for Windows NT 4.0 SJ 6-16Windows NT 4.0 (transparent) SJ 5-18

paper, drilledQuick Print for Windows NT 4.0 SJ 6-16Windows NT 4.0 (transparent) SJ 5-24

Papyrus Document System, see ISIS products

parameters, PSERVER PJ 3-17parentheses ()


parser, IPDSrestarting CM 3-6

partial media match PJ 4-6password

changing administrator CM 1-3changing operator CM 1-3

password, Superuser SJ 4-9passwords

creating File of Files DC 4-9–DC 4-11, DC 4-11–DC 4-12

FTP default DC 4-12path limits PD 1-31



INDEX

pathforall operator PD 1-33pattern listing, creating File of Files DC 4-11PC operating systems, tools supported DC

1-5PC-DOS workstations, setting up SJ 2-2–SJ

2-6PCIM2 card IP 2-5, SO 2-5PCL IS 6-2

drivers for 5c PD 2-17PCL 5

coding recommendations PD 2-14resolution PD 2-2–PD 2-3

PCL 5ccoding recommendations PD 2-16

PCL 5c support PD 2-15PCL commands, supported PD 2-6PCL Copy command PD 2-8–PD 2-9PCL data streams SO 5-1PCL fonts IP 2-8, IP 2-9, SO 2-8, SO 2-9PCL fonts, installing CM 10-3PCL mixed plex side selection PJ 7-7PCL Paper Source command PD 2-12PCL parameters

changing CM 5-36restoring default CM 5-40, CM 5-41setting CM 5-36

PCL supportfull color PD 2-1highlight color PD 2-1monochrome PD 2-1

PCL symbol sets CM 5-38PCL tray assignment PD 2-12PCONSOLE PJ 3-16, CM 4-4PCONSOLE, Novell SJ D-2PDL SO 4-3

displaying code CM 2-6PDL code, displaying CM 2-6pecifying Colors for IPDS Jobs PJ 8-5pel fonts IS 4-12percentage indicator IP 3-4, SO 3-4perforated paper IP A+3, SO 6-3performance

factors affecting PJ 9-1improving GetTiff macro DC 8-5measuring PJ 9-3, DC 7-7, DC D1-1–DC

D1-11

Personality Profile parameters CM 6-3Personalized documents DC 1-2, DC 1-3personnel, training SJ 4-4Photometric-Interpretation TIFF tag DC E-1Photoshop, Adobe DC 9-1pictorial, highlight color rendering PJ 1-14pixel doubling IS 4-17pixels

distribution attributesTiff/G4, ByteCode compared DC 3-2values DC 3-1

GetTiff macro DC 8-4, DC 8-5Mask, Form formats DC 3-3–DC 3-4

pixels, painting PD 1-23–PD 1-26PJL, commands PD 2-6placement, referenced files PJ 6-2PlanarConfiguration TIFF tag DC E-1planning checklist SJ 4-4–SJ 4-7platforms

job status capability SJ 1-7job submission requirements SJ 1-5–SJ

1-6platforms, tools supported DC 1-5plex

attribute PJ 1-19IPDS PJ 8-3

Plex attribute PJ 5-12plex, PostScript simulated mixed PD 1-21PlexChangesDynamic PJ 7-2PlexChangesDynamic attribute PJ 1-19ports PD 1-18post-enhancement PD 1-14PostScript IS 6-2

code examples PJ 6-4comment format PD 1-27Document Structuring Convention (DSC)

PJ 4-2EOF delimiters PD 1-18–PD 1-20extensions, proprietary PD 1-16fonts

listing PD 1-2Type 1 PD 1-2–PD 1-6

GetTiff macro PJ 6-4–PJ 6-5jobs, delimiting PD 1-17–PD 1-18level 2 PJ 1-11Level 2 operators PD 1-21



INDEX

master PD 1-27masters, referencing files PJ 6-3Printer Controller operations PD 1-22printer description, see PPDsetpagedevice operator PJ 4-2virtual memory PD 1-20, PD 1-31

PostScript data streams SO 5-1PostScript drivers, Microsoft Word DC 4-2PostScript files

coding form referencesapplications DC 8-7–DC 8-8GetTiff macro DC 8-4–DC 8-7run exec macro DC 8-1–DC 8-3

generatingDOS formmrg tool DC 6-13DOS reprint tool DC 6-13DOS xcat tool DC 6-15SunOS/Solaris FormMerge DC 6-17Windows FormMerge DC 6-3–DC 6-5Windows Reprint DC 6-2–DC 6-3Windows XCat DC 6-11, DC 6-12

PostScript fonts IP 2-8, SO 2-8PostScript Printer Description file, see PPD

filePostScript, proprietary extensions TG 5-2power

cord IP 6-3requirements IP 5-1–IP 5-3, IP 6-19–IP

6-20power on/off switch IP 3-5, SO 3-5power outage

powering off and on after CM 3-5power saver mode DC D1-7power savers IP 3-6, SO 3-6powering off

system CM 3-3powering off after power failure CM 3-5powering on IS 6-1

controller CM 3-2system CM 3-1

PPDfiles PD 1-28–PD 1-29specifications PD 1-28

PPD file, installing SJ 2-5, SJ 2-15PPFA (Page Printer Formatting Aid) IS 4-3PPM (pages per minute) DC D1-1

PQAautomatic TG 5-1manually running TG 5-2

precedence, dynamic media PJ 4-5precedence, plex changes PJ 7-4predrilled paper IP A+3, SO 6-3pre-enhancement PD 1-14preferences

Quick Print for Windows NT 4.0print SJ 6-23–SJ 6-25

Windows NT 4.0 (transparent) SJ 5-36preinstallation checklist SJ 4-8preprinted paper IP A+3, SO 6-3presentation highlight color rendering PJ

1-14preset colors PJ 1-14pressure roll wiper, replacing RM 4-5–RM

4-11print

enginewrite-black PD 1-15–PD 1-16, PD

1-26write-white PD 1-15–PD 1-16

resolution, recommended PD 2-2–PD 2-3server PJ 3-17speed PD 1-34–PD 1-35

Print Billing Report command CM 8-11Print Color Calibration Target command CM

15-6print command SJ 3-23, SJ 3-24

color mismatch results SJ 3-59Print Documents from CDROM command

CM 2-8Print Documents from Floppy command CM

2-9print flows, AFP IS 10-1–IS 10-7Print Font List command CM 10-8Print Font Sample command CM 10-8Print Form List command CM 11-1Print Form Sample command DC D1-3, CM

11-3DOS reprint alternative DC 6-13syntax, example DC 7-6Windows Reprint alternative DC 6-3

print job data, copying CM 9-8print job submission programs SJ 1-4



INDEX

print jobsadvancing PJ 3-11arrival PJ 3-2canceling PJ 3-3cancelling PJ 3-4changing job name


concatenating chapters DC 6-11constructing PJ 5-1copying PJ 5-11delivery instructions SJ 6-14delivery order PJ 5-8dividing PJ 5-1enabling ineligible DC 7-6failures

DOS formmrg DC 6-13DOS reprint DC 6-13DOS xcat DC 6-15DOS xmerge DC 6-14SunOS/Solaris formmerge DC 6-17Windows FormMerge DC 6-5Windows XCat DC 6-12

holding PJ 3-3, PJ 3-6insertion order PJ 3-1interrupting PJ 3-14listing PJ 3-7–PJ 3-10Novell PJ 3-16prioritizing PJ 3-1promoting PJ 3-3, PJ 3-11queue PJ 3-3referenced content PJ 6-1releasing PJ 3-3, PJ 3-11reordering PJ 3-2scheduling PJ 3-12starting PJ 3-13stopping PJ 3-14submitting SO 4-2–SO 4-5, PJ 4-2transferring PJ 3-5

Print Log command CM 9-13Print Monitor Application, LaserWriter

version 8.x SJ 4-39Print on demand DC 1-2print options

"Save as File" SJ 4-19, SJ 4-31application specific SJ 4-13, SJ 4-25

background printing SJ 4-14, SJ 4-26color matching SJ 4-16, SJ 4-28cover page SJ 4-15, SJ 4-27error handling SJ 4-18, SJ 4-30general SJ 4-12, SJ 4-24layout SJ 4-17, SJ 4-29printer specific SJ 4-20, SJ 4-32Xerox Job Ticket (Macintosh AdobePS

driver) SJ 4-34Print Options command CM 5-29Print PCLFont Sample command CM 10-9print quality TG 5-1Print Quality Adjusting, see PQAprint quality adjustments (PQA) RM 5-1print queue


Windows NT 4.0 SJ 5-38print queues

conditions PJ 3-1managing PJ 3-16Novell Netware, managing PJ 3-16

print queues, Novell SJ D-1–SJ D-2, SJ D-10, SJ D-12

Print Sample Document command CM 8-7print server (PSERVER), Novell SJ 4-11, SJ

D-3–SJ D-5, SJ D-6–SJ D-10, SJ D-13

Print Service Facility, see PSFPRINTDEF command CM 4-6PRINTDEF program CM 4-2printer

components IP 1-9defining IP 8-3dimensions

dual stacker IP 6-6HCF IP 6-8HCF and stitcher/stacker IP 6-9stitcher/stacker IP 6-7

installation IP 8-1–IP 8-2maintenance IP 8-4–IP 8-5performance

AS/400 IP F-28MVS IP F-19

pingingAS/400 IP F-25–IP F-27



INDEX

MVS IP F-17–IP F-19power requirements IP 5-8–IP 5-9, IP

6-19–IP 6-20sample definitions

MVS with channel attachment IP E-1–IP E-3

MVS with TCP/IP connection IP F-1–IP F-20

VM with channel attachment IP E-6VSE with channel attachment IP E-7

printer control consolecomponents IP 3-2–IP 3-5, SO 3-2–SO

3-5described IP 3-2, SO 3-2

printer controllercomponents IP 2-1, SO 2-2placement IP 5-3–IP 5-5results of print command color mismatch

SJ 3-59space requirements IP 5-3–IP 5-7

Printer Controller exterior, cleaning RM 8-1Printer Controller operations PD 1-22printer diagnostics CM 2-18Printer Dictionary operators PD 1-10–PD

1-11printer drivers

installing and configuringWindows NT 4.0 (transparent) SJ

5-1–SJ 5-7Printer Job Language, see PJLprinter problems TG 6-1PrinterName attribute PJ 1-19printers

adding Novell NetWare-attached printer to print queue list


adding TCP/IP-attached printer to print queue list


ByteCode compression DC 3-3capabilities IP 1-1, SO 1-1components

CCU changeout cart IP 3-7, SO 3-7feeder trays IP 3-2, SO 3-2

instruction labels IP 3-6, SO 3-6language button IP 3-6, SO 3-6power savers IP 3-6, SO 3-6printer control console IP 3-2–IP 3-5,

SO 3-2–SO 3-5sample tray IP 3-2, SO 3-2stacker trays IP 3-2, SO 3-2

dual stacker IP 3-9, SO 3-9emulation SJ 3-9high-capacity feeder IP 3-8, SO 3-8IBM Group 3 compatible IS 1-1models SJ 3-3remote PJ 3-17removing from setup, Quick Print for

Windows NT 4.0 SJ 6-37restarting TG 7-4selecting

Macintosh transparent printing SJ 4-2Quick Print for Windows NT 4.0 SJ

6-2–SJ 6-3setting defaults, Quick Print for Windows

NT 4.0 SJ 6-36specifications IS 7-5stitcher/stacker IP 3-10, SO 3-10virtual PJ 1-6

printingbilling meter data CM 8-11cancelling PJ 3-4controller-resident forms

Windows FormMerge DC 6-3–DC 6-5Windows Reprint DC 6-2–DC 6-3

Decomp Service benefits DC 1-1duplex PD 2-8environment SJ 3-2font list CM 10-8font sample CM 10-8form samples CM 11-3IPDS PJ 3-15merge documents DC G-8options CM 5-11PCL font sample CM 10-9quality

monitoring TG 5-1quality, features affecting TG 5-2remote solutions SJ 3-10sample documents CM 8-5–CM 8-7



INDEX

showing status CM 8-2single forms DC 7-6starting IPDS PJ 3-15stopping PJ 3-14, CM 3-3stopping IPDS PJ 3-15TIFF tags DC 9-1–DC 9-2using

Macintosh (transparent) SJ 4-1–SJ 4-40

Windows NT 4.0 (transparent) SJ 5-7, SJ 5-9–SJ 5-10

using lpr utilities SJ 3-40using Xerox utilities software SJ 3-23

printing configuration reports CM 2-23printing documents from diskette CM 2-9printing files from CD ROM CM 2-8printing IPDS jobs PJ 8-3priority in setting attributes PJ 1-6problems

printer TG 6-1stacker TG 6-1

procedures4850 dry ink waste container RM 6-4–RM

6-6Background Forms, creating DC 5-2–DC

5-4book building DC 6-10, DC 6-12bypass transport

installing RM 7-3–RM 7-5removing RM 7-1–RM 7-3

CCUsloading RM 5-11–RM 5-12removing RM 5-5–RM 5-10

developer waste container, replacing RM 6-1–RM 6-4

dry ink, adding RM 5-1–RM 5-4feed belt, cleaning TG 4-4–TG 4-5feeder trays, loading RM 1-2–RM 1-6File of Files, creating

XCat DC 4-9–DC 4-11XMerge DC 4-11–DC 4-13

formscreating DC 4-2printing (Windows Reprint) DC 6-2–

DC 6-3fuser agent, adding RM 4-1–RM 4-5

gfi directories, removing CM 13-3paper trays, clearing misfeeds TG 4-1–

TG 4-3PostScript files, generating

FormMerge (Windows) DC 6-3–DC 6-5

XMerge (Windows) DC 6-5–DC 6-7pressure roll wiper, replacing RM 4-5–

RM 4-11printers, restarting TG 7-4Starlight dry ink waste container RM 6-4–

RM 6-8variable data files, creating DC 4-3–DC

4-9Xerox Client Software, installing

PC-DOS SJ 2-3–SJ 2-4UNIX workstations SJ 2-10–SJ 2-12

processor IP 2-2, IP 2-6, IP 5-9, IP 5-10, SO 2-3, SO 2-6

product operator TG 5-2Profile parameters CM 6-3–CM 6-6profiles CM 6-1–CM 6-6

creating CM 6-2setting CM 6-2showing CM 6-2

programming, Main StockWindows NT 4.0 (transparent) SJ 5-18

Promote Document command PJ 3-11protocol

data transfer PJ 3-5submission tools PJ 4-3–PJ 4-7

protocolsnetwork communication requirements

SO 4-3–SO 4-5translation requirements SO 4-4–SO 4-5

PS/2AFP data flow IS 10-5

PS2 setting PJ 1-11PSERVER SJ D-3, PJ 3-17

choosing CM 4-1–CM 4-3configuring system as CM 4-4

PSERVER configuration PJ 2-9PServer problems TG 3-1PSF

data towers SJ 2-6platforms SJ 2-6



INDEX

printer definitions IP E-2supported levels, minimum SJ 2-7

PSF compatibility SO 5-1PSF for AIX SJ 2-14–SJ 2-15PSF/6000 IP E-5, IP F-30PSF/MVS

configuring IP F-9PRINTDEV statement example IP F-13PRINTDEV statement parameters IP

F-9–IP F-12PSF/VSE IP 1-4, SO 5-1PT2 Subset SO 5-6PTOCA SJ 2-5PTOCA (Presentation Text Object Content

Architecture) IP 1-8, SO 5-5, SO 5-6publications IP C-1purging accounting information SJ 4-10

QQuarkXPress software, image quality SJ

4-40queues

directory, Novell PJ 3-16job priority PJ 3-2remote printer PJ 3-18starting PJ 3-13stopping PJ 3-14

Quick Print for Windows NT 4.0accessing Quick Print SJ 6-2–SJ 6-3customizing print queue list SJ 6-25–SJ

6-37job tickets

loading SJ 6-4–SJ 6-5resetting to defaults SJ 6-8saving SJ 6-6setting up SJ 6-9–SJ 6-25

overview SJ 6-1selecting printer SJ 6-2–SJ 6-3

QuotaPages attribute PJ 1-20QuotaSeconds attribute PJ 1-20

Rranges, printing PJ 1-1raster graphics PD 2-3read access PJ 6-3Ready To Open indicator RM 1-2, TG 4-2

ReadyToPrint attribute PJ 1-20rebooting

controller CM 3-6RecipientName attribute PJ 1-20reference mode DC 6-5referenced content files

associating PJ 6-7naming PJ 6-1placement PJ 6-2removing PJ 6-7–PJ 6-8sharing PJ 6-2single-use PJ 6-2transferring PJ 6-3

referencing filesusing GetTiff macro PJ 6-4–PJ 6-5within PostScript masters PJ 6-3

referencing forms DC G-6reinitializing software CM 2-26relative addressing PJ 6-1Release Document command PJ 3-11remote access CM 1-4

broadcast message CM 2-1telnet SJ 8-1web based CM 1-5Web-based SJ 8-1

remote access, using CM 1-4remote connections SJ 3-10remote device

enabling CM 2-29remote disabling Unix shell CM 2-32remote enabling Unix shell CM 2-31remote printer (RPRINTER), Novell SJ 4-12,

SJ D-5–SJ D-8, SJ D-11–SJ D-13remote printer workstation, Novell PJ 3-18remote service TG 1-2removing

gfi directories CM 13-3orphan data files CM 12-6

renderinggray PD 1-27image PD 1-37

reordering print jobs PJ 3-2Reporting billing meters RM 9-3reprint tool

DOS DC 6-13overview DC 1-4



INDEX

Windows DC 6-2–DC 6-3ReprocessForCopies attribute PJ 1-21required directory, referenced files PJ 6-2requirements

see also specificationsclearance space IP 6-12–IP 6-14delivery access IP 6-16–IP 6-18environmental IP 6-4Ethernet SJ 4-15network information SJ 4-11network interface SJ 4-14Novell Netware information SJ 4-11operating systems SO 4-4–SO 4-5power IP 5-1–IP 5-3, IP 5-9, IP 6-19–IP

6-20printer controller space IP 5-3–IP 5-7site SJ 4-6space IP 5-3, IP 6-11–IP 6-14Token Ring SJ 4-15translation protocol SO 4-4–SO 4-5

requirements, bypass transport IP 3-12, SO 3-12

requirements, hard disk TG 2-2requirements, installation DC 2-1Reset Job IDs CM 2-12Reset Job IDs command CM 2-12resetting job tickets

Windows NT 4.0 (transparent) SJ 5-15–SJ 5-16

resolution IS 4-13, PD 1-26enhancement PD 1-12–PD 1-16fax PD 1-34PCL 5 PD 2-2–PD 2-3

Resolution attribute PJ 1-21, PJ 3-10resolution, IPS 7.2 and NPS/IPS IS 4-14ResolutionUnit TIFF tag DC E-1resource towers SJ 3-7resourceMatch attribute PJ 3-12resources

creating IS 8-1–IS 8-4MICR IS 5-13storing IS 4-1

responsibilitiescustomer IP 1-12, SJ 4-2–SJ 4-4, IP 8-2–

IP 8-3Xerox IP 1-12, SJ 4-1–SJ 4-2, IP 8-2–IP

8-3Restart IPDS Parser command CM 3-6Restart Sequencer DC B-1Restart Sequencer command CM 3-6Restart System command CM 3-6restarting

controller CM 3-6IPDS parser CM 3-6

restore context, bypassing PD 1-9Restore Default Imager Parameters

command CM 5-32Restore Default PCL Imager Parameters

command CM 5-35Restore IPDS Input Groups PJ 2-1Restore IPDS Input Groups command PJ

2-11Restore Site Files command CM 2-10Restore Virtual Printers List command CM

2-11Restore Xerox Files command CM 2-11restoring

virtual printers list CM 2-11restoring backed-up site files CM 2-10restoring forms DC F-2restoring key-value pairs PJ 5-2restoring Xerox files CM 2-11retry count SJ 4-10RGB color space PJ 1-23RGB color, converting PJ 1-14RGB values SO 1-8root password SJ 4-9rotate operator PD 1-37, PD 1-41rotation, image PD 1-36–PD 1-37rough performance estimates DC D1-2router, default SJ 4-9RPRINTER SJ D-6, PJ 3-18

choosing CM 4-1–CM 4-3configuring system as CM 4-5

RPrinter problems TG 3-3RS/6000

AFP data flow IS 10-6connections SJ 2-13–SJ 2-15

RS232 port PD 1-18run exec macro DC 1-5, DC 8-1–DC 8-3, DC

8-6



INDEX

Ssample documents, printing CM 8-5–CM 8-7sample printer definitions

MVS with channel attachment IP E-1–IP E-3

MVS with TCP/IP connection IP F-1–IP F-20

VM with channel attachment IP E-6VSE with channel attachment IP E-7

sample tray IP 3-2, SO 3-2SamplesPerPixel TIFF tag DC E-1SAP packets TG 3-1saturation, color PJ 1-14save context, bypassing PD 1-9SaveFormBC attribute DC 3-1, DC A-2SaveFormG4 attribute DC 3-1, DC A-2SaveFormG4 format DC D1-7SaveMaskBC attribute DC 3-1, DC 7-3SaveMaskBC format PJ 1-10, DC 5-1SaveMaskG4 format PJ 1-10saving job tickets

Quick Print for Windows NT 4.0 SJ 6-6Windows NT 4.0 (transparent) SJ 5-13–

SJ 5-14saving print jobs DC 3-1–DC 3-6scale operator PD 1-40scaling PD 1-26, PD 1-34, PD 1-40–PD 1-43scaling images

run exec macro DC 8-2TIFF images DC 8-4

scanconversion TG 5-5scanning

conversion PD 1-23, PD 1-25order PD 1-35–PD 1-40rotation PD 1-35–PD 1-40

schedulingpolicy

setting PJ 3-2, PJ 3-13showing PJ 3-2

print jobs PJ 3-12scuffer arms TG 4-26Security IS 5-14security option, lpr CM 12-5Security, MICR CM 14-2security, MICR IS 5-14Select Jobs dialog DC 6-10–DC 6-11

Select Paper dialog DC 6-8selecting

labels IP A+2, SO 6-2paper, characteristics IP A+2, SO 6-2transparencies IP A+2, SO 6-2

Selecting Media for Feeder Trays PJ 8-2sender name

unknownMacintosh AdobePS driver SJ 4-22Macintosh LaserWriter 8.x driver SJ

4-10Macintosh LaserWriter driver 7.x SJ

4-9SenderName attribute PJ 1-11, PJ 1-21sending print data PJ 3-16sequencer

restarting CM 3-5serial port, asynchronous PD 1-18Server Dictionary operators PD 1-9server override switch, Xerox Client print

command TG 2-2service

Xerox responsibilities SJ 4-2service call, required information TG 1-1service telephone number IP B-1, RM 9-1Set Channel Offline command PJ 3-15Set Channel Online command PJ 3-15Set color calibrations CM 15-1, CM 15-6, CM

15-10, CM 15-11, CM 15-12Set Default Color Calibration command CM

15-11Set Default Media command CM 5-2set input profile command CM 6-2, CM 6-3Set IPDS Virtual Printer command PJ 2-10Set Option command CM 5-11set output profile command CM 6-2Set Profiles command CM 6-2, CM 6-3Set Scheduling Policy command PJ 3-12Set Status Message command CM 2-12Set Time command CM 7-1Set Tray Purge|No Purge CM 5-8Set Tray <n> Tray <m> command CM 5-7Set Tray Command RM 1-6Set Tray command PJ 4-1, PJ 4-4, DC 7-6,

CM 5-4, CM 5-5Set Tray Default command CM 5-5



INDEX

Set tray from virtual printer media CM 5-8Set Virtual Printer Flags command PJ 2-8setbscolor TG 5-4SetCacheDevice operator PD 1-32setcmykcolor TG 5-4setcolorscreen TG 5-3setfileposition operator PD 1-21setflat TG 5-5setflat operator PD 1-25setgray TG 5-4setgray operator PD 1-28setlinewidth TG 5-5setlinewidth operator PD 1-23, PD 1-24setpagedevice error


setpagedevice operatorcalls, multiple PJ 5-2caution PJ 5-2command PJ 5-12example PJ 5-4media

requests PJ 4-2selection PJ 4-6

MultiSet feature PJ 5-2setrgbcolor TG 5-4setrgbcolor call DC 8-6setscreen TG 5-3setscreen operator PD 1-32setting

default media CM 5-7dynamic media PJ 4-5–PJ 4-6feeder tray attributes CM 5-4imager parameters CM 5-29imager parameters, PCL CM 5-33multiple copies PJ 5-11printer options CM 5-29profiles CM 6-2static media PJ 4-1

Setting IPDS Options PJ 8-1setting stacker groups CM 5-10settransfer TG 5-4shading

adding color IS 5-9limitations IS 9-1Macintosh LaserWriter driver 7.x SJ 4-10

shared resource content files, naming PJ 6-2shared space IP 6-12–IP 6-14shortcuts, command CM 1-1Show Default Color Calibration command

CM 15-12Show Default Media command CM 5-4Show Document Attributes command PJ

1-30Show Host ID CM 2-13Show Host ID command CM 2-13Show Imager Parameters command CM

5-30Show IPDS Tracing command CM 2-13Show IPDS Virtual Printer command PJ 2-10Show License Status command CM 2-15,

CM 2-17Show Log command DC 7-7, DC D1-1, CM

9-10Show PCL Imager Parameters command

CM 5-33Show Profiles command CM 6-1Show Scheduling Policy command PJ 3-13Show Status command DC 7-8, DC D1-7,

CM 8-2Show Time command CM 7-1showpage operator DC 8-2shutting down the system CM 3-3simplex IP 3-16, SO 3-16simplex output PD 2-6simplex printing


5-17single job, removing referenced files PJ 6-7single-use referenced content files PJ 6-2site

selection, Xerox responsibilities SJ 4-1Sixth Sense IP 1-12, IP B-2, SO 1-5size of job PJ 3-1SkipJTPrescan attribute PJ 1-22slow scan direction PD 1-35, PD 1-38smooth curves TG 5-5SNMP SO 1-4socket printing SJ 2-19Socket Printing, TCP/IP CM 2-28software SJ 3-2



INDEX

corruption problems CM 2-26features, IPS SO 5-6licensis CM 2-15network IP 1-11–IP 1-12operating system IP 1-11–IP 1-12printer controller

installing IP 8-1reinitializing CM 2-26supported products IP 1-8, SO 5-5system SO 4-1

software license SO 1-6software prerequisites

AS/400 IP F-21MVS IP F-1

software updates CM 2-7installing from CD-ROM CM 2-7installing from diskette CM 2-7

Solaris 2.3tools supported DC 1-5

Solaris clients, lpr SJ 2-18Sonoran fonts IS 4-11space

planning guidelines IP 6-11requirements IP 5-3, IP 6-11–IP 6-14

space character DC 4-11, DC 4-13special

processing PJ 1-10special pages

Windows NT 4.0 (transparent)adding SJ 5-25changing SJ 5-27deleting SJ 5-27overview SJ 5-25–SJ 5-27

specificationssee also requirementsCCITT PD 1-34electrical IP 5-1–IP 5-3, IP 5-8, IP 6-1–IP

6-4, IP 6-19–IP 6-20environmental IP 5-3PPD PD 1-28printer IP 6-19–IP 6-20printer controller IP 5-8–IP 5-9

specifications, printers IS 7-5specifying colors for IPDS Jobs IP C-4speed, printing PD 1-34–PD 1-35spooling, checking available space CM 8-2

stackerproblems TG 6-1tray IP 3-9, SO 3-9trays IP 3-2, SO 3-2

stacker trayspecifying PJ 1-18

stacker tray, clearing paper jams TG 4-26stacking, offset facility IS 5-10Staple attribute PJ 1-22Staple command

syntax PJ 1-18using PJ 5-7–PJ 5-10

stapling PD 2-7, PD 2-9Starlight dry ink waste container, replacing

RM 6-4–RM 6-8Start command PJ 3-13, CM 3-5Start IPDS Printing command PJ 3-15Start IPDS Tracing command CM 2-13Start Virtual Printer command PJ 2-7, DC 7-9starting

IPDS printing PJ 3-15system CM 3-1

starting job processing PJ 3-13static data

frames DC 4-7variable data compared DC 4-1

static formscreating DC G-6filename DC G-7referencing DC G-6submitting DC G-6

static media specification PJ 4-1static plex changes PJ 7-3Status attribute PJ 1-22Status Dictionary operators PD 1-10status message

setting telnet CM 1-4status messages

setting CM 2-12status signals, third-party finishing devices

IP 3-15, SO 3-15status, determining PJ 3-7–PJ 3-10status, job command SO 4-6stdout message PD 1-22stitcher wire

maintaining RM 3-1



INDEX

stitcher wire, ordering IP A+7, SO 6-7Stitcher/Stacker PJ 5-8stitcher/stacker IP 3-10, IP 6-7–IP 6-9, IP

6-20, SO 3-10tray, clearing paper jams (areas A and B)

TG 4-27–TG 4-28stitching IS 5-10

specifyingQuick Print for Windows NT 4.0 SJ

6-13Windows NT 4.0 (transparent) SJ

5-19specifying none


STM (Sense Type and Model) command SJ 3-9

stop button IP 3-5, SO 3-5Stop command PJ 3-14, CM 3-5Stop IPDS Printing command PJ 3-15Stop IPDS Tracing command CM 2-14Stop Queuing command CM 4-4Stop Virtual Printer command PJ 2-7, DC 7-9stopping

system CM 3-1Stopping and starting IPDS printing PJ 3-15stopping and starting job processing CM 3-5stopping the system

using background menu CM 3-3using Halt System command CM 3-3

stopping virtual printers DC 7-9storage object size limits PD 1-33StripOffsets TIFF tag DC E-1stroke TG 5-5stroke operator PD 1-23–PD 1-24subdirectory, appName PJ 6-2SubmissionDate attribute PJ 1-22SubmissionProtocol attribute PJ 1-22Submitter media specification PJ 4-2submitting print jobs SO 4-2–SO 4-5

Macintosh drivers (transparent) SJ 4-1–SJ 4-40

methods SJ 1-4workstation reference SJ 1-5–SJ 1-6

subscript support SO 5-6Sun PC-NFS V5.1 SJ 2-2

Sun SPARCstation, requirements SJ 3-1Sun workstations IP 5-4, IP 5-5SunOS clients, lpr SJ 2-17SunOS/Solaris

formmerge tool DC 6-17getg4 tool DC 9-3tools supported DC 1-5xcat tool DC 6-19

superscript support SO 5-6Superuser password SJ 4-9supplies

cartridge tapes IP A+7checklist IP A+16, SO 6-15consumable supplies tables SO 6-9–SO

6-13consumables tables IP A+8–IP A+14developer IP A+6, SO 6-6diskettes IP A+7, SO 6-7dry ink

color IP 6-11toner IP A+6, SO 6-6

fuseragent IP A+6, SO 6-6shield IP A+6, SO 6-6

paper IP A+1–IP A+3, SO 6-1–SO 6-3stitcher wire IP A+7, SO 6-7tapes SO 6-8

supplies table IP A+8–IP A+14, SO 6-9–SO 6-13

support services IP A+14–IP A+15, IP B-1–IP B-4, RM 9-1–RM 9-3, SO 6-13–SO 6-14

suppressing header pages PJ 1-11symbol sets, PCL CM 5-38system components IP 1-8, IP 1-9System Dictionary operators PD 1-8System overview IP 1-1system problems TG 7-1system status, checking CM 8-1–CM 8-8System V UNIX clients, lpr SJ 2-17Systems Application Architecture (SAA) SJ

2-4

Ttab stock, Quick Print for Windows NT 4.0 SJ

6-16



INDEX

tables, colorColorTables PJ 1-14

tapecopying documents to CM 2-4, CM 2-5listing files on CM 2-5ordering SO 6-8

tape drive IP 5-9, IP 5-10TCP/IP IP 8-2, PJ 3-5

defining IP F-1Ethernet interface IP 1-5, SO 5-2MVS

configuring IP F-13Profile dataset IP F-14–IP F-16

Socket Printing CM 2-28TCP/IP servers

Quick Print for Windows NT 4.0 SJ 6-27TCP/IP socket printing SJ 2-19TCP/IP, see Ethernet; Token Ringtechnical manual example DC 1-2telephone line, modem CM 2-30telephone numbers

Xerox Parts and Product Support Center IP A+15, SO 6-14

Xerox Supply Center IP A+14, SO 6-14telnet SJ 8-1

broadcast message, sending CM 1-4greeting message CM 1-4listing clients CM 1-4logging on and off CM 1-4messages CM 1-4using CM 1-4

telnet connections, determining job status SJ 1-6

Telnet greeting message CM 12-4terminating commands CM 1-2test masters, handwritten PD 1-1–PD 1-2The DC 6-8Thicken attribute PJ 1-22third-party finishing devices

mechanical interface IP 3-13, SO 3-13three-phase

DELTA IP 6-4TIFF file format DC E-1TIFF files, reading PJ 6-4TIFF tags

mandatory DC E-1

printinggetg4 tool (DOS) DC 9-1–DC 9-2getg4 tool (SunOS/Solaris) DC 9-3

TIFF utilitiesgetg4 (DOS) DC 9-1–DC 9-2overview DC 9-1

Tiff/G4 filesByteCode files compared DC 3-2processing, GetTiff macro DC 8-4–DC

8-7TIFF/G4 format DC 8-6TiffEdit tool

Macintosh platform DC 1-5Tiff/G4 files DC 3-2

time requirements, planning installation SJ 4-5

time, setting CM 7-1tinted paper IP A+3, SO 6-3Token Ring IP 1-5, IP 1-9, IP 1-10, IP 2-5, SJ

4-15, SO 2-5, SO 5-2AS/400 SJ 2-13mainframes SJ 2-11

Token Ring LAN SO 4-6tokens, defining PD 1-19–PD 1-20tolerance, media matching PJ 4-6toner, see dry inktools

listed DC 1-4Trace command CM 2-13trace facility SO 5-6trace file

viewing CM 2-13tracing, IPDS CM 2-13

showing CM 2-13starting CM 2-13

tracing, IPDSstopping CM 2-14training IP B-4

customer responsibility SJ 4-4operators SJ 4-3, IP 8-2Xerox responsibilities SJ 4-2

training, operators RM 9-2transfer TG 5-4transfer functions TG 5-4transferring software updates CM 2-7transforming user coordinates PD 1-40translation requirements, protocol SO 4-4–



INDEX

SO 4-5transmission rate IP 1-5, SO 5-2transparencies, selecting IP A+2, SO 6-2transport, bypass PJ 1-18tray assignment, PCL PD 2-12tray assignments PD 2-13Tray definition, PCL PD 2-12Tray Full indicator RM 2-1Tray Unlock button RM 1-2, TG 4-1trays

determinig loaded media DC 6-8feeder IP 3-2, SO 3-2loading feeder RM 1-1output RM 2-1sample IP 3-2, SO 3-2selecting PJ 4-1Set Tray command DC 7-6specifying PJ 1-18

number DC 6-10stacker IP 3-2, SO 3-2stitcher/stacker RM 2-2

trays, see input trays; output traystroubleshooting

Novell implementation TG 3-1–TG 3-3Xerox Client Software installation TG

2-1–TG 2-2tumble duplex printing PJ 5-11


5-17turning radius IP 6-16–IP 6-18Type 0 fonts PD 1-3

installing PD 1-3Type 1 fonts

creating PD 1-6installing PD 1-2loading PD 1-4, PD 1-6using PD 1-5–PD 1-8

Type 3 fonts PD 1-3installing PD 1-3

typefaces, see fonts

UUI commands

Change virtual printerBackgroundform attribute DC 7-2

CycleForms attribute DC 5-5–DC 5-8disposition attribute DC 7-3overview DC 7-2

Create Virtual Printer DC 7-1Delete Form DC 7-4Delete Virtual Printer DC 7-4List Documents DC D1-9List Forms DC 7-4, DC D1-7List Virtual Printers DC 7-5listed DC 7-1Print Form Sample DC 7-6, DC D1-3Set Tray DC 7-6Show Log DC 7-7, DC D1-1Show Status DC 7-8, DC D1-7Start Virtual Printer DC 7-9Stop Virtual Printer DC 7-9

Uncollated attribute PJ 1-22undefined command error PD 1-18underscore support SO 5-6United States/Canada IP 5-2UNIX

command tool SJ 4-10compressed bar format CM 2-3root password, selecting SJ 4-9shell, using CM 12-2Sun operating system IP 2-7, SO 2-7Superuser password SJ 4-9

UNIX client softwareinstalling SJ 2-9removing SJ 2-14

Unix compressed bar format CM 2-3, CM 2-5, CM 2-6

Unix shelldisabling remote CM 2-32disabling remotely CM 2-32enabling remotely CM 2-31

unloadingdual stacker trays RM 2-1stitcher/stacker trays RM 2-2

unresponsive printer CM 3-5Unset Tray CM 5-9, CM 5-10updates

software CM 2-7updates, software

installing from CD-ROM CM 2-7installing from diskette CM 2-7



INDEX

user coordinate systemdefault PD 1-39–PD 1-41mapping PD 1-1–PD 1-2

User Dictionary operators PD 1-8–PD 1-9user interface SJ 3-8user interface, web-based SJ 8-1user-customized TRC PJ 1-23user-defined category PJ 1-9user-defined fonts PD 1-4utilities

PCONSOLE PJ 3-16PSERVER PJ 3-17RPRINTER PJ 3-18

utility commands CM 2-1–CM 2-13

V/var/db/forms directory DC 4-3, DC 6-3/var/spool/data directory

generating PostScript files DC 6-3File of Files default DC 6-5storing files DC C-1Xcat jobs default DC 6-12

variable dataforms overlaying DC 6-17Mask, Form formats DC 3-4–DC 3-6overlaying images DC 5-1–DC 5-4, DC

7-2specifying form pages DC 6-7static data compared DC 4-1

variable data filesblank page requirement DC 6-5, DC 6-7,

DC 6-14, DC 6-18caveats DC 6-5, DC 6-14, DC 6-18creating, Word Mail Merge DC 4-3–DC

4-9directory storage methods DC C-1locating local DC 6-5

vector graphics PD 2-2vertical clearance IP 6-5VerticalImageShift attribute PJ 1-23VerticalImageShiftForBack attribute PJ 1-24View Field Codes button DC 8-8viewing print queue, Novell PJ 3-16VIPP

benefits PD 3-1demo mode PD 3-3

license PD 3-3modes PD 3-1, PD 3-2

VIPP cache capability CM 5-28virtual memory PD 1-20, PD 1-31virtual printer attributes

Background Form DC 5-1disposition DC 3-1–DC 3-6, DC 5-3

virtual printer, IPDS PJ 2-1virtual printers SJ 4-12, SJ D-4, SJ D-10, SJ

D-12, CM 4-2, CM 4-6backing up list of CM 2-11changing PJ 2-3–PJ 2-4Create Virtual Printer command DC 7-1creating Background Forms DC 5-1, DC

7-2defining, configuring

commands DC 3-1example DC 3-7mask/form formats DC 3-3–DC 3-6TIFF/G4, ByteCode formats DC 3-2

deleting PJ 2-4, DC 7-4description PJ 2-1listing PJ 2-5media attributes PJ 4-3media list PJ 4-3restarting DC 7-9restoring list of CM 2-11setting flags PJ 2-8specifying using Novell forms PJ 2-9starting PJ 2-7stopping PJ 2-7, DC 7-9

virtual printers, overview SJ 1-3VM IP E-6VM print flow IS 10-3VMS systems SJ 1-1Vn DC 5-8voltages, requirements IP 5-2VSE IP E-7VSE print flow IS 10-4

Wwaste containers RM 6-1–RM 6-8web based access CM 1-5Web-based user interface SJ 8-1Weight field, Select Paper dialog

editing DC 6-15, DC 6-19



INDEX

"What is..." promptDOS xcat DC 6-15DOS xmerge DC 6-15SunOS/Solaris formmerge DC 6-19

Windowschanging form directory DC B-1–DC B-4Decomp Service installation DC 2-1FormMerge tool DC 6-3–DC 6-5Reprint tool DC 6-2–DC 6-3XCat tool

described DC 6-7–DC 6-12XMerge tool DC 6-5–DC 6-7

Windows 2000, setting up a new printer SJ 2-20

Windows NT 4.0 (transparent)installing and configuring system SJ 5-1–

SJ 5-7job tickets

opening SJ 5-11–SJ 5-12resetting SJ 5-15–SJ 5-16saving SJ 5-13–SJ 5-14setting up SJ 5-16–SJ 5-37

Windows platforms DC 1-5, DC 6-2wiper, see pressure roll wiper, replacingWire Percentage indicator RM 3-1wizard mode, using CM 12-1Wollongong Pathway Access release 3.1 SJ

2-2Word 6.0, Microsoft

inserting form references DC 8-8Mail Merge

producing PostScript file DC 5-2variable data files DC 4-3–DC 4-9

WordPerfect, converting IS 9-2workstation, remote PJ 3-18workstations

client SO 4-1description SO 4-1–SO 4-5disk space requirements SJ 2-1

workstations see Sun workstationswrite-black engine PD 1-15–PD 1-16, PD

1-26write-white engine PD 1-15–PD 1-16

Xx axis PD 1-35

XCat toolcreating File of Files DC 4-9–DC 4-11overview DC 1-4Windows

described DC 6-7–DC 6-12xcat tool

DOS DC 6-15Sun OS/Solaris DC 6-19

XDS for Macintoshsystem requirements SJ 4-1

Xerox Check Performance Guarantee IS 5-11

Xerox Client print command TG 2-1Xerox Client Software IP 2-8, SJ 4-10, IP 8-2,

SO 2-8installing

man pages SJ 2-12–SJ 2-13PC-DOS workstations SJ 2-2–SJ 2-4UNIX workstations SJ 2-9–SJ 2-12

package, general requirements SJ 2-1removing

DOS SJ 2-6UNIX SJ 2-14

Xerox Client Software, troubleshooting installation TG 2-1–TG 2-2

Xerox CMC-7 IS 5-12Xerox Customer Education IP B-4, RM 9-3Xerox Customer Parts and Product Support

Center IP A+15, SO 6-14Xerox Customer Service Center RM 9-1Xerox Customer Service Support Center IP

B-1Xerox Documentation and Software

Services (XDSS) IP B-3, RM 9-1Xerox drivers SJ 1-1Xerox files

restoring backed up CM 2-11Xerox files, backing up CM 2-10Xerox Font Center IP B-4, RM 9-2Xerox network print queue

Windows NT 4.0, printing to SJ 5-38Xerox PPD files required with third-party

driversWindows NT 4.0 (transparent) SJ 5-7

Xerox Printing Systems Customer Support Center IP B-2



INDEX

Xerox responsibilities SJ 4-1–SJ 4-2, IP 8-2–IP 8-3

Xerox Supply Center IP A+14, SO 6-14Xerox utilities software SJ 3-23Xerox value-added features IS 1-1, IS 5-1XGFNub. See line mode extensionXIPP prescan DC C-1XMerge tool

creating File of Files DC 4-11–DC 4-13overview DC 1-5Windows DC 6-5–DC 6-7

xmerge toolDOS DC 6-14SunOS/Solaris DC 6-18

XPAF solution, comparing IS 6-1XPPS PJ 4-2XResolution TIFF tag DC E-1

Yy axis PD 1-35YResolution TIFF tag DC E-1

Zzero-width lines, imaging PD 1-24zone name, specifying SJ 4-10



INDEX

