Wudpro

Wide range for perfect selection

Better features, best deal, Great value

Rugged-n-rel iable m/c & workl i fe

Economy of ser vice & spares

Jai Means ValueWood-solid Value

Your companion on the path of GROWTH

WO

OD

WO

RK

ING

CA

TA

LO

GU

E 2

01

2

©

Combiplaners | 2-3 |

Surface Planers | 4 |

Thickness Planers | 5 to 7 |

Moulders | 8-9 |

Spe. Design m/cs | 9 |

Wood Saws | 10-11 |

Sanders | 12 |

Mortisers & Tenoners | 12-13 |

Other m/cs | 14 |

1 machine 8 functions

inter changeable attachments

These are optional attach., which can be ordered any timeseparately. Can be fixed to m/cs that show the icon

Standard Acce. :¾" Drill Chuck, Drilling Tool

Model No: D Drilling

Standard Acce. :Emery Cup Wheel (4" dia.)

Model No: 10-G,15-G,20-G Blade Grinding

Standard Acce. :Moulding Block - 1½" width & spanner

Model No: M Moulding (auto Feed)

With unique folding-top facility for flexibility

Noise dampening system for quiet operation

Anti kick-back system to avoid backsliding

Mo

del

: J-

10

18

Mo

del

: J-

10

15

n ®Combimax

COMBI PLANERS

Model No.

mm / inch mm / inch mm / inch mm / inch

MaxCombimax

330 / 13"

330 / 13"

177 / 7”

1220 / 48"

3B-W

330 / 13"

330 / 13"

177 / 7”

1550 / 61”

3B-W

177 / 7”

1550 / 61”

3B-W

455 / 18"

455 / 18"

455 / 18"

455 / 18"

177 / 7”

1830 / 72”

3B-W

3 / 1440 3 / 1440 5 / 1440 5 / 1440

Standard Accessories :- 3 planer blades fitted in cutter block, mitre gauge, motor pulley,motor fixing plate, safety guard for thicknessing, toolkit & m/c manual.* L = Machine with 61" table length. * LL = Machine with 72" table length.

Standard cutter block - code no.

Surfacing capacity

Max. planning width

Thicknessing capacity

Length of surface table

Power required - HP / RPM

J-1013 J-1013 L J-1018 J-1018 LL

Max

Model No.

mm / inch mm / inch

J-1010 J-1019Max-18


Surfacing capacity

Max. planning width




Minimax

1550 / 61”

455 / 18"

455 / 18"

5 / 1440

177 / 7”

3B-W

254 / 10"

254 / 10"

177 / 7”

1140 / 45"

2B

3 / 1440

Standard Accessories :- 2/3 planer blades fitted in cutter block, mitre gauge, motor pulley, motor fixing plate, toolkit & m/c manual.

2

mm / inch

J-1015Max-15

381 / 15"

381 / 15"

177 / 7”

1295 / 51”

2B

3 / 1440

Max

mm / inch

J-1014Max-13

330 / 13"

330 / 13"

177 / 7”

1220 / 48"

2B

3 / 1440

mm / inch

J-1020Max-20

1550 / 61”

508 / 20"

508 / 20"

5 / 1440

177 / 7”

3B-W

n TM TM TM TM® Minimax, Max-13, Max-15, Max-18 & Max-20

©

Mo

del

: J-

72

4(H

)

Mo

del

: J-

70

2

Folding top facility to give more flexibility & visibility to work while thicknessing

Anti kick-back System to avoid back sliding

3

A European Quality Universal Combined Machine from

Planer :

Technical features:

Useful working width 300Cutter block diameter (mm)/n. knives standard 72 / 3Maximum stock removal 3Surfacing tables total length 1300Thicknessing table dimensions 450 x 300

Saw - spindle moulder worktable dimensions 1020 x 325Blades tilting 90° ÷ 45°Max. saw blade dia. with scoring blade installed 315Max. saw blade projection from table at 90° / 45° 100 / 79

Maximum useful spindle length 100Maximum tool diameter when profiling 210Max. dia. of tool lowered under the table at 90° 180Total Power - HP 12

mm

Spindle moulder :

Circular saw :

- Extruded anodized aluminium slidingtable with 1600 mm max. squaring stroke.

- Squaring frame complete with telescopic fence with 1

retractable fence, for parallel cuts and surface planing

Salient features :-

- New design of the dust - conveyor, to protect the cutter

block, for further system safety increase.

- Presetting for mortiser and adjustable spindle moulder fence.

n Combiplaner-S

NEW

n Combiplaner-S (Heavy Duty)

COMBI PLANERS

LAB 300 PLUS

NEW

330 / 13"

305 / 12"

200 / 8”

1220 / 48"

3B-W

3 / 1440

455 / 18"

455 / 18"

200 / 8”

1550 / 61”

3B-W

5 / 1440

200 / 8”

1550 / 61”

3B-W

610 / 24"

610 / 24"

5 / 1440

455 / 18"

455 / 18"

228 / 9”

1830 / 72”

4B-W

5 / 1440

228 / 9”

1830 / 72"

4B-W

5 / 1440

610 / 24"

610 / 24"

Model No.

Combiplaner-S


Master

Standard Accessories :- • For Master models : 4 / 3 planer blades fitted in cutter block, mitre gauge, motor pulley, motor fixing plate, V.-belt guard, toolkit & m/c manual. • For Popular models : 2 planer blades fitted in cutter block, mitre gauge, motor pulley, motor fixing rail, toolkit & m/c manual. (s = Machine with circular saw attachment)

Std. cutter block - code no.

Surfacing capacity

Max. planning width




mm / inch

J-718(H) J-724(H) J-701 J-703J-702

254 / 10"

254 / 10"

177 / 7”

1140 / 45”

2B

2 / 1440

177 / 7”

1220 / 48"

2B

330 / 13"

330 / 13"

3 / 1440

mm / inch mm / inch

J-302 J-303

Popular (open stand)

177 / 7”

1550 / 61"

2B

330 / 13"

330 / 13"

3 / 1440

mm / inch

J-303 L

n Combiplaner-S

Mo

del

: J-

30

3

SURFACE PLANERS

n ®Surfo Max-S

n Surface Planer-S

n Surface Planer-S

mm / inch

Surfacing capacity 330 / 13"

Length of surface table 1295 / 51"

Standard cutter block - code no. 3B-W

mm / inch

330 / 13"

1550 / 61"

3B-W

J-127 J-127 L

mm / inch

330 / 13"

1830 / 72"

3B-W

mm / inch

455 / 18"

1550 / 61"

3B-W

J-127 LL J-128

Surface Planer

Model No.

Model No. J-118

mm / inch

455 / 18"

1830 / 72"

3B-W

mm / inch

610 / 24"

1550 / 61"

3B-W

2 / 1440Power required - HP / RPM 3 / 1440 3 / 1440 3 / 1440 3 / 1440 3 / 1440

J-128 LL J-129

J-119

Standard Accessories :- 3 Planer blades fitted in cutter block, mitre gauge, motor pulley, motor fixing rail, toolkit & m/c

manual. * L = machine with 61" table length. * LL = machine with 72" table length.

(S = Machine with circular saw attachment)

Master

Surface Planer-s

Surface Planer (Box Type)

Infeed table longer than outfeed table for better accuracy & extra support

4

PDP(W/o Drill chuck & drilling tool)

PD (Gear Type)(With ½" Drill chuck &drilling tool)

Drilling attachment for Surface planer :(It is optional, can be ordered any time separately)

Model No.

Surface Planer-S (Open Stand)


Standard Accessories :- 2 planer blades fitted in cutter block, mitre gauge, motor pulley, motor fixing plate, toolkit & m/c manual. * L = Machine with 61" table length. / * LL = Machine with 72" table length

Surfacing capacity




J-106 J-107 J-107 L J-107 LL

mm / inch

J-206

Popular

254 / 10"

1220 / 48"

2B

2 / 1440

330 / 13"

1550 / 61"

2B

3 / 1440

330 / 13"

1295 / 51"

2B

2 / 1440

228 / 9"

1220 / 48"

2B

2 / 1440

330 / 13"

1830 / 72"

2B

3 / 1440

305 / 12"

1220 / 48"

2B

2 / 1440

mm / inch

J-207

Master

Mo

del

: J-

30

18

NEW

Mo

del

: J-

10

7 L

Mo

del

: J-

20

6

mm / inch

Surfacing capacity 330 / 13"

Length of surface table 1675 / 66"

Standard cutter block

Size of dust collection port-Dia.

3B-W

mm / inch

330 / 13"

1980 / 78"

3B-W

3 / 1440Power required - HP / RPM 3 / 1440

Model No.Model No.Surfomax

Surfomax - S

J-3113

J-3013

J-3113 L

J-3013 L

Standard Accessories : 3 planer blades fitted in cutter block mitre gauge, motor pulley, motor fixing plate, toolkit & m/c manual. (S = Machine with circular saw attachment) *L = Machine with long table

mm / inch

455 / 18"

1980 / 78"

3B-W

J-3118

J-3018

mm / inch

455 / 18"

2285 / 90"

3B-W

J-3118 L

J-3018 L

mm / inch

610 / 24"

1980 / 78"

3B-W

J-3124

J-3024

Max

100 / 4" 100 / 4" 100 / 4" 100 / 4" 100 / 4"

5 / 1440 5 / 1440 5 / 1440

Surface Planer

Noise dampening systemfor a quieter operation

Mo

del

: J-

12

7 L

Mo

del

: J-

24

12


©

5

Specially design spiral, serrated2- infeed rolls for positive feeding.

n TMTrio - 12

mm / inch

Min. working thickness

Upper horizontal cutter block code no.

Left & right side vertical spindle diameter

Three Side Thickness Planer : TRIO-12J-2412

Standard Accessories :-3 nos planer blade fitted in upper horizontal cutter block, 2 nos planer blades fitted in 4" width 2 nos vertical block, 1 no. electric motor of 3HP/1440 RPM ( 3-phase), 2 nos electric motor of 2 HP/2800 RPM ( 3-phase), 2Nos. R/F switches, V-belt guard, toolkit & m/c manual.

Max. planing width

Min. planing width

Max. working thickness

Model No.

Master

305 / 12"

50 / 2"

125 / 5"

16 / ⅝"

3B-W

Size of dust collection port - Dia.

Upper horizontal cutter block motor - HP / RPM

Vertical blocks motor (2 Nos) - HP / RPM

100 / 4"

3 / 1440

2 / 2800

Noise dampening system for quiet operation

n TMDuo - 12

THICKNESS PLANERS

View of left & right side vertical blocks can be adjusted according to requirement.

Apart from 3 side planing, moulding can also be done as per block profile.

Three side planing with Anti -kick back system to avoid back sliding

NEW

UpGrade to the tripple force

Standard Accessories :- Electric motors of 3 HP & 2 HP - 1440rpm (3 Phase) each, R/F - Switch - 2nos, 3 planer blades, fitted in both cutter blocks, V-belt guard, toolkit & m/c manual.

Note : Use Dust collector DC-52 with m/c for superior performance.

mm / inch

Standard cutter block (both)code no.

Upper cutter block Power required - HP / RPM

Bottom cutter block Power required - HP / RPM

Double Side Thickness Planer : DUO-12J-2212

Max. planing width

Max. working thickness

Min. working thickness

Model No.

Master

305 / 12"

150 / 6"

9 / ⅜"

3B-W

3 / 1440

2 / 1440

Size of dust collection port - Dia. 100 / 4"

Mo

del

: J-

22

12

30 / 1 ”

THICKNESS PLANERS

n Cutter Block Selection :(Applicable to all Combi Planers, Surface / Thickness Planers)

3 blade wedge spring type2 blade cutter block3 / 4 blade wedge type

i.e. adopting 3B-WS cutter block, instead of what is given as std. cutter block. Which can be obtained by paying a little more extra.

<< There is one better option

Max. planing width

Size of Dust Collection Port-Dia.


Standard cutter block -


Model No.

Standard Accessories :- 4 planer blades fitted in cutter block, motor pulley, motor fixing plate, v-belt guard, toolkit & m/c manual.

Note : Use Dust Collector DC-32 with m/c for superior performance.

610 / 24"

228 / 9"

4B-W

5 / 1440

mm / inch

100 / 4"

mm / inch

455 / 18"

228 / 9"

4B-W

5 / 1440

100 / 4"

J-618 (H)

Master

J-624 (H)

Thicknessplaner

Max. planing width




Model No.

Model No.Thickness PlanerThickness Pl. Automould

Thicknessplaner

mm / inch

455 / 18"

200 / 8"

3B-W / 2B

5 / 1440

Master

610 / 24"

200 / 8"

3B-W / 2B

5 / 1440

mm / inch

J-503J-603 Standard Accessories :-

Models : J-601, J-603 :- 3 planer blades fitted in cutter block.

Model : J-502, J-503 :- 2 planer blades fitted in cutter block, motor pulley, motor fixing plate, V-belt guard, toolkit & m/c manual.

J-601J-502

n Thickness Planer

6

n Thickness Planer

NEW

Mo

del

: J-

62

4 (

H)

Mo

del

: J-

50

2

Mo

del

: J-

60

1

Anti kick-back System to avoid back sliding

Provision for Dust Collector

n Thickness Planer

Mo

del

: J-

31

3

n Thickness Planer

mm / inchMax. planing width 254 / 10"Thicknessing capacity 177 / 7"

Standard cutter block - code no. 2B

2 / 1440Power required - HP / RPM

Model No.

330 / 13"177 / 7"

2B

3 / 1440

mm / inch

Thickness planer (Open Stand)

Standard Accessories :- 2 Planer blades fitted in cutter block,motor pulley, motor fixing rail, toolkit & m/c manual.

J-313J-312

Popular

nTM

Planomax

Max. planing width




Model No.

Planomax - Thickness planer

Standard Accessories :- 2/3 Planer blades fitted in cutter block, motor pulley, motor fixing plate, toolkit & m/c manual.

mm / inch381 / 15"

177 / 7"2B

3 / 1440

J-2015Max

508 / 20"

177 / 7"3B-W

5 / 1440

J-2020

mm / inch

Max. planing width




Thickness Planer

Thickness Pl. Automould

Thickness planerStandard Accessories :- 2 planer blades fitted in cutter block, motor pulley,motor fixing plate, toolkit & m/c manual.

mm / inch

330 / 13"

200 / 8"

3 / 1440

Model No.

Model No.

455 / 18"

200 / 8"2B 2B

5 / 1440

mm / inch mm / inch610 / 24"

200 / 8"

2B

5 / 1440

J-401

J-411

Popular

J-402

J-412

J-403

J-413


7

©

Mo

del

: J-

41

2

Mo

del

: J-

40

1

n Thickness Planer

Leader

An essential accessory for all planers

A unique blade setting device from JAI

Mo

del

: J-

20

15

For its Range > Quality > Cost > Dependability

THICKNESS PLANERS

n Tilting Arbour Spindle Moulders

MOULDERS

Arch moulding fixture andball bearing roller collarM

od

el :

J-5

04

(T)

n Basic Spindle Moulder

Arch moulding fixture

Standard Accessories :- Moulding block one no. each of 1",2" & 3 width, motor pulley, motor fixing plate, washers set, toolkit & m/c manual.• Arch moulding fixture in model no : J-504 (T) & J-504 (H) • Bearing guide & mitre gauge with wood clamping facility in model no : J-504 (T)

Work table size

Spindle diameter

UP / Down movement of spindle

Arbour tilt - degree

Model No.

Spindle speed (RPM)


Spindle Moulder

mm / inch

835 x 760

33" x 30"

100 / 4"

45°

J-504 (T)

6000

3 / 2800

Max

mm / inch

835 x 835

33" x 33"

-125 / 5"

J-504 (H)

6000

3 / 2800

Master

Standard Accessories :- Routing rip fence, Moulding block 1 no. each of 1" & 2" width, motor pulley, motor fixing plate, washers set & V-belt guard, Collet-12 mm hole with 8 mm hole sleeve, Sample router cutter-1 no. toolkit & m/c manual

Model No.Basic Spindle Moulder

mm / inch

J-404

Work table size

Spindle diameter

610 x 610

24" x 24"

UP / Down movement of spindle 100 / 4"

Spindle speed (RPM) 6000 / 9000

Power required - HP / RPM 2 / 2800

Note : The speed of 9000 RPM is advisable for routing work only

Popular

8

It can be fixed on this Max-moulder & can be bought any time separately.

Special facility forRouting work

n Spindle Moulders

Mo

del

: J-

40

4

Mo

del

: J-

50

4 (

H)

Dovetailed groove for easy sliding Equipped with a convenient wood clamping facility

Auto Feeder :For auto feeding of work piece with safety. Improvesproduction, reduce cost & better finishing with accuracy

Models : AF-38 : 3 Roller, 8 speed, 1 HP 3Ø motor

AF-32 : 3 Roller, 2 speed, ¼ HP 3Ø motor

NEW

30 / 1 " 30 / 1 "

30 / 1 "

Model No.

Length of bed - 6.5 ft

Height of centers

Max. work diameterDivisions

mm / inchJ-923

Popular

1980 / 78"

165 / 6½"

150 / 6"Up to 6

Single phaseTotal power required

Admit between centers 1220 / 48"

Standard Accessories :-1 no. power hand router, big collet - 12 mm hole, std. collet - 12 mm hole with 8 mm hole sleeve, revolving center, 3 pin center, sample cutter -1 no, toolkit & m/c manual

Basic Spiral Lathe

Admit between centersHeight of centersSpindle speeds - RPM.

Faceplate diameter

Model No.

Power required - HP/RPM

mm / inch

1000 / 39⅜"220 / 8⅝"

570 / 1000 /1850 / 2500265 / 10.5"

1.5 / 1440

J-924

MaxBasic Copy Lathe

Max. Working LengthMax. Diameter

Mechanical Copying Device (Manual):

970 / 38⅛"200 / 8"

Standard Accessories :-

Special 1.5HP/1440 RPM 3Phase Motor, R/F

Switch, Transparent Safety Guard, Tool rest,

HSS turning cutter, Face plate, 4 pin centre,

Revolving centre, V-belt, toolkit & m/c manual

n Basic Spiral Lathe

MOULDERS | SPE. DESIGN M/CS

n Auto Mould

(Optional attachment, can be ordered any time separately)

Circular DesignAttachment (CDA)

Routing work-table as standard accessory (RWT)

Copying works at diametersgreater or smaller than the template or pattern, feed byhandwheel

Mo

del

: J-

92

4

Double auto mould. Model : J-507

9

UP / Down movement of table

Longitudinal movement of table

Table tilt - degree

Max. moulding block width


Table size

J-507

Auto MouldDouble Auto MouldAuto Mould :

Model No.


• for J-507: Moulding block 1 no. each of 1", 2" & 4" width, motor pulley, motor fixing plate,

washers set. moulding V-block & toolkit

• for J-505: Moulding block 1 no. each of 1.5" & 3" width, motor pulley, motor fixing plate,

washers set & toolkit.

50 / 2"

3 / 1440

mm / inch

18" x 6"455 / 150

100 / 4"

Main Side

015

114 / 4½"

mm / inch

455 / 15018" x 6"

63 / 2½"

25 / 1"

2nd side

-

75 / 3"

-

50 / 2"

3 / 1440

mm / inch

18" x 6"455 / 150

100 / 4"

015

114 / 4½"

J-505

Note : Also Available Single Auto Mould J - 505

n Basic Router

Mo

del

: J-

90

1

Standard Accessories : Routing work table, R/F switch, 3 nos. different size guide pins, sample cutters 3 nos., collet - 12 mm hole with 8 mmhole sleeve, motor pulley, motor fixing plate, flat belt, toolkit & m/c manual

mm / inch

J-901Model No.

Throat clearance 380 / 15"

Spindle vertical movement 25 / 1"

Work table size 355 x 355/

14" x 14"

Spindle speed - RPM 11000Routing work table size 610 x 420 /

24" x 16½"

15°Table tilt - degree

1.5 / 2800 Power required - HP / RPM

Basic Router Max

n Basic Copy Lathe

©

Mo

del

: J-

92

3

Moulding FacilityV-notch in working table helps making angularmoulding, for both models M

od

el :

J-5

07

MasterMaster

The saw blade can be cut with

045 - tilted saw blade, can be adjusted bet-

0 0ween 0 to 90 .

Mo

del

: J-

92

5 (

A)

n Radial Saw

Mo

del

: J-

81

9

n Jig Saw

This is optional attachment, which can be ordered any time separately. Can be fixed to all Band Saws Models

Model : BG (optional) Blade grinding attachment

Standard Accessories :- Starter, 1 no electric motor of 3 HP - 2800 RPM (3-phase) saw guard & toolkit.Max. Circular saw diameter

Max. depth of cut

Max. crosscut capacity

Work table size

Model No.


Radial Saw

mm / inch

350 / 14"

90 / 3½"

550 / 21½"

890 x 1145

35" x 45"

J-925 (A)

3 / 2800

Max

Standard Accessories :- motor pulley, motor rail & 5 nos. sample blade.

Throat depth

Cutting capacity

Table size

Approx. enginespeed - RPM

Model No.

Power required -HP / RPM

mm / inch

610 / 24"

32 / 1¼"

14" x 12"

355 x 305/

525 / 625

J-819

1/1440

mm / inch

915 / 36"

32 / 1¼"

16" x 14"

405 x 355/

525 / 625

J-820

1/1440

Jig Saw Popular

Standard Accessories :- Max : Saw blade, upper & lower saw blade guide set, mitre gauge,motor pulley, motor fixing plate, blade safety guard, toolkit & m/c manual ● circular cutting attachment as standard accessories with machine. Master : Saw blade, upper & lower saw blade guide set, mitre gauge, motor pulley, motor fixing plate, toolkit & m/c manual.

mm / inch

305 / 12"

280 / 11"

mm / inch

455 / 18"

430 / 17"

J-530 J-540

mm / inch

305 / 12"

280 / 11"

mm / inch

430 / 17"

455 / 18"

J-540 (E)

mm / inch

380 x 380 /

15" x 15"

1.5 / 1440

Diameter of saw wheelsThroat depth

Model No.

Dist. between work table & guide

Work table size

Power required - HP / RPM21" x 23"

535 x 585 /

2 / 1440

150 / 6"150 / 6"

355 x 380 /

14" x 15"

1.5 / 1440 2 / 1440

20" x 22"

508 x 560 /

254 / 10"254 / 10"

5 / 1440

28" x 30"

710 x 760 /

355 / 14"

585 / 23"

610 / 24"

J-550 (E)Max MasterBand Saw

J-530 (E)

10

NEW

WOOD SAWS

n Band Saws

n 10" Table Saw

Max. circular saw diameter

Max. depth of cut


Arbour diameter


Model No.

Table size

mm / inch

J-10 LB

254 / 10"

82 / 3¼"045

1.5 / 1440

15.87 / ⅝"

686 x 512 /

27" x 20"

Tilting Arbour - 10" - Table Saw Max

Mo

del

: J-

10

LB

Standard Accessories : 1 no. electric motor 1.5 HP/1440 RPM (1-phase), special switch, saw guard, mitre gauge, toolkit & m/c manual.

Mo

del

: J-

54

0

Mo

del

: J-

54

0 (

E)

Circular Cutting Attachment

n Band Saws

mm / inch

Max. circular saw diameter 305 / 12"Max. depth of cut 89 / 3½"

Table tilt - degree - -

Work table size 915 x 760 /

36" x 30"

Model No. J-434


mm / inch

455 / 18"

140 / 5½"

- -

1015 x 760 /

40" x 30"

J-435

5 / 1440

Popular

mm / inch

200 / 8"

50 / 2"045

455 x 355 /

18" x 14"

J-533

1 / 1440

Adjustable Circular Saw

mm / inch

305 / 12"

89 / 3½"045

660 x 560 /

26" x 22"

J-534

3 / 1440

mm / inch

455 / 18"

140 / 5½"045

915 x 610 /

36" x 24"

J-535

5 / 1440

mm / inch

610 / 24"

190 / 7½"045

1015 x 635 /

40" x 25"

J-536

5 / 1440

Master

Standard Accessories :- Popular - J-434, J-435 :- motor pulley, motor rail, toolkit & m/c manualPopular - J-533 :- mitre gauge, saw guard, motor pulley. Extra Acce. :- stand for motor fixingMaster - J-534, 535, 536 :- mitre gauge, motor pulley, motor rail, saw guard & toolkit

Angular & cross cutting with easy sliding

n Adjustable Circular Saws

11

©

Mo

del

: J-

43

4 (

w/o

Tilt

ing)

n Tilting Arbour Circular SawWith Sliding Table

Mo

del

: J-

63

4 (

ST)

NEW

NEW

Mo

del

: J-

53

4

Mo

del

: J-

53

3

WOOD SAWS

Note : Also Available J-634 Without Sliding Table

Max. Circular saw diameterMax. depth of cut


Work table size

Sliding table size

Model No.



Tilting Arbour Circular Saw

Standard Accessories :- mitre gauge, motor pulley, motor fixing plate, saw guard, mitre gauge with Wood clamping facility in model J-634(ST), toolkit & m/c manual.

mm / inch

355 / 14"

114 / 4½"0

45

915 x 785 /

710 x 400 /

36" x 31"

28" x 15¾"

3 / 1440

100 / 4"

mm / inch

355 / 14"

114 / 4½"0

45

915 x 785 /

- -

36" x 31"

3 / 1440

100 / 4"

J-634 (ST)Max

J-634

Standard Acce. :- 1 no. electric motor of 1 HP-2800

RPM-3 phase, ½" chisel set, ½" drill chuck & toolkit.

Two Sanding drums configu-ration provides high efficiency sanding performance. Allowing coarse and fine results in one time sanding.

Standard Accessories : J-81 OVS: 1 no. electric motor 0.5 HP/1440 RPM (1-phase) table inserts, special switch, toolkit & m/c manual.J-82 OVS: 1 no. electric motor 1.0 HP/1440 RPM (1-phase), 10 different sizes of spindle, table inserts, special switch, toolkit & m/c manual.

mm / inch

Table size 370 x 370 /

Oscillation per minute

14½" x 14½"

Spindle speed - RPM

100

Table tilt - degree

1720045

Model No.

0.5 / 1440Power required - HP / RPM

Oscillation stroke 12 / ½"

Oscillating Vertical Sander

mm / inch

610 x 610 /

24" x 24"

75

75 / 3"

1720045

1 / 1440

J-81 OVS J-82 OVS

Max

12

n Horizontal / Vertical Sander

End table for curved parts

Standard Accessories :- 1 no electric motor 1.5 HP/1440 RPM (1-phase) sanding belt, mitre gauge, end table, special switch, toolkit & m/c manual.

mm / inch

Sanding belt width 150 / 6"

Table size

Sanding belt length 2260 / 89"

686 x 250

Belt linear speed - FPM

27" x 9⅞"

3500

Model No.(Size : 6" X 89")

1.5 / 1440Power required - HP/RPM

Horizontal / Vertical Sander Max

J-80 HVS

Standard Accessories :- sanding belt, sanding disc, motor pulley.Extra Acce. :- stand for motor fixing.

Sanding belt size

Sanding disc size

Spindle - RPM


150 x 1220

6" x 48"

254 / 10"

1400

1 / 1440

mm / inch

Belt & Disc SanderModel No.

PopularJ-710

n Belt & Disc Sander

Mo

del

: J-

71

0

n Chisel Mortiser

Table size

Max. depth of cut

Cross movement of table

Longitudinalmovement of table

Model No.

Electric motor (HP/RPM)

Chisel Mortiser

mm / inch

700 x 150 /

27½" x 6"

90 / 3½"

100 / 4"

228 / 9"

J-920

1 / 2800

Master

Spe. Note : m/c with motor of 1 phase at extra cost

Mo

del

: J-

80

HV

S

Sanding belt Platen can be tilted from

o o90 to 180

Mo

del

: J-

92

0

Mo

del

: J-

25

00

SANDERS | MORTISER

n Oscillating Vertical Sanders

Mo

del

: J-

81

OV

S

Mo

del

: J-

82

OV

S(H

eavy

du

ty)

n Drum Sander

Note : Use Dust Collector with Sander m/c for superior performance

Sanding drum speed - RPM 1600Sanding drum diameter 125 / 5"

3 / 1440⅛ ⅛Feed drive DC power required


1600

165 / 6½"

5 / 1440

Standard Accessories :-Model : J-2500 : 1 No. electric motor 3.0 HP/1440 RPM (3-phase), 1 No. DC motor ⅛ HP, special switch, sanding belt, toolkit & m/c manual.Model : J-3800 : 1 No. electric motor 5.0 HP/1440 RPM (3-phase)1 No. DC motor ⅛ HP, special switch, sanding belt, toolkit & m/c manual.

mm / inch

Max. sanding width 635 / 25"

mm / inch

965 / 38"

J-2500

Size : 25" Size : 38"

J-3800Model No.

Drum Sander Max

n Chain Mortisers

Mo

del

: J-

93

0

Mo

del

: J-

93

0 (

E)

©

13

Chain Mortiser holder unit

n Teno Mac

Chisel Mortiser Attachment (CMA)(Optional. it can be ordered any time separately.)Standard Acce:- ½" Chisel set

Chisel Mortiser holder unit

Door frame mortising

NEW

Mo

del

: J-

91

9

mm / inch

Table size 740 x 470 /29" x 18½"

Model No. J-1919

Table movement

Max. Length of tenon

Max. width of work piece

Top cutter block horizontal adust.

Max. circular saw dia.

Max. depth of cut of circular saw


2 Nos Elec motor - Tenoning (HP/RPM)

Elec motor - Circular saw (HP/RPM)

800 / 32"

150 / 6"200 / 8"25 / 1"

254 / 10"50 / 2"

100 / 4"

2 / 2800

1 / 2800

mm / inch

535 x 203 /21" x 8"

J-919

200 / 8"

150 / 6"-

12.5 / ½"

-

-

-

2 / 2800

-

Tenomac-S MaxTenomac Master

Standard Acce. :- Model : J-1919 : 2 no.electric motor of 2HP/2800 RPM ( 3-phase), 1 no electric motor of 1 HP/2800 RPM, 2 nos.R/F switch, 2 nos. carbide cutter blocks, mitre gauge, saw guard, toolkit & m/c manual.Model : J-919 : 2 no.electric motor of 2HP/2800 RPM ( 3-phase),2 nos. carbide cutter blocks, mitre gauge, toolkit & m/c manual.

Mo

del

: J-

19

19

Easy slide movement for accurate tenoning with

end cutting unit for perfect tenon length

MORTISERS & TENONERS

n Teno Mac-S

Standard Acce. :- 1 no. electric motor of 2 HP/1440 RPM (3-phase), ½ chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.

mm / inch

560 x 255

22" x 10"

75 / 3"

305 / 12"

140 / 5½"

J-930 (E)

2 / 1440

mm / inch

Table size 550 x 290

UP / Down movement of table

21½" x 11½"

Longitudinal movement of table

75 / 3"

Max. depth of cut

305 / 12"

140 / 5½"

Model No. J-930


Master PopularChain Mortiser

Spe. Note : m/c with motor of 1.5 HP 1 phase at extra cost

Grinding attachment (Common for

all chain mortiser machines)

n Chain-n-Chisel Mortiser (Pneumatic)

NEW

Mo

del

: J-

19

30

mm / inch

Table size 455 x 150 /18" x 6"

Model No. J-1930MaxChain-n-Chisel Mortiser (Pneumatic)

Standard Acce. :- 1 no.electric motor of 2HP/1440 RPM ( 3-phase), ½" chain set, R/F switch, Oil bowl, grinding wheel & v-belt fitting in grinding attachment, toolkit & m/c manual.

Max. height of workpiece on table

Max. height of door or frame

Max. depth of cut - Chain mortiser

Max. depth of cut - Chisel mortiser

Longitudinal movement of head

Table tilting - degree

Size of dust collection port - Dia.2Air Pressure Required (kg/cm )

Electric motor (HP / RPM)

254 / 10"

1000 / 39"140 / 5½"90 / 3½"305 / 12"

45º

100 / 4"

2 / 1440

Note : m/c with motor of 1 phase at extra cost

5 to 7

n Turning Lathes

Heavy Duty

Light Duty

Model :

J-2

35-C

Model :

J-1

24

OTHER M/CS.

14

Mo

de

l : J

-92

2

n Blade Grinders

Model :

J-2

35

Dust Collectors

STANDARD ACCE :- Grinding wheel safety guard, motor pulley, motor plate (only in Master models) EXTRA ACCESSORIES :- Grinding wheel

Max. grinding capacity

Grinding wheel diameter


Model No.

Blade Grinder Master

mm / inch mm / inch mm / inch

J-234 J-235 J-236

330 / 13"

150 / 6"

455 / 18"

150 / 6"

0.5 / 1440

610 / 24"

150 / 6"

0.5 / 14400.5 / 1440

330 / 13"

100 / 4"

0.5 / 1440

455 / 18"

100 / 4"

0.5 / 1440

610 / 24"

100 / 4"

0.5 / 1440

330 / 13"

150 / 6"

0.5 / 1440

455 / 18"

150 / 6"

0.5 / 1440

Master Cup Wheel


J-234 C J-235 C J-236 C

Popular

mm / inch mm / inch

J-124 J-125

Length of bed

Height of centers

Admit between centers

Model No.

Approx. spindle speed - RPM


motor pulley, motor plate,

face plate, 3 pin center,

revolving - center, V-belt &

m/c manual. • motor fixing

stand, motor rail in Popular

bench models.

Master floor ModelHeavy Duty Light Duty

Turning Lathe


1825 / 72"

1220 / 48"

203 / 8"

700 / 1400 /

1 / 1440

2800

2435 / 96"

1830 / 72"

203 / 8"

700 / 1400 /

1 / 1440

2800

4.5 ft. 6 ft. 8 ft.

1370 / 54"

760 / 30"

165 / 6½"

2800

1 / 1440

700 / 1400 /

J-911 J-921 J-931

mm / inch mm / inch

1825 / 72"

1220 / 48"

203 / 8"

700 / 1400 /

1 / 1440

2800

2435 / 96"

1830 / 72"

203 / 8"

700 / 1400 /

1 / 1440

2800

6 ft. 8 ft.

J-922 H J-932 H

mm / inch mm / inch

1825 / 72"

1220 / 48"

165 / 6½"

700 / 1400 /

1 / 1440

2800

2435 / 96"

1830 / 72"

165 / 6½"

700 / 1400 /

1 / 1440

2800

6 ft. 8 ft.

J-922 J-932


Cup Wheel Model

Mo

de

l : J

-92

2 H

SawingSurfacing

1

Thicknessing

2

Rebating

3 4

Grooving

5

Drilling

6

Grinding

7

Moulding

8

M/c withcircular-sawattachment

3 inter changeableattachmentsoptionally

1 m/c that performs8 functions

1 m/c thatperforms 5 functionsNo. 1 to 5

Suggestsportability of m/c

High quality mcs, value added features Sturdily built, Proven performers Standard Economy range

Icons suggesting wood work functions of the mcs

Arch Moulding Routing Blade sawing Rectangularslot making

Square Holemaking

Tenoning VerticalSanding

HorizontalSanding

Double sidethicknessing

Three sidethicknessing

SUGGESTIVE ICONS (used in this catalogue)

model : DC-32(Double Bag)

model : DC-21(Single Bag)

Various Models Available

Notes :

• Due to continuous product improvement the technical specifications are subject to change without prior information.

• Some accessories shown fitted on the machine may not be part of Standard accessories

Mo

de

l : J

-92

1

Popular Bench Model

• Multi Boring

• Spindle Moulder

• Multi Borings

• Hot press / Cold press

• Roller Press

• Panel Saw

• Curvilinear Edge Bander

• Edge Bander - 5000.in

• Edge Bander - 4000.in

• Post form

• Edge Trimmer

• CNC Router

• Vacuum Membrane Press

Wide range to suite your project-plan & budget allocations

The Modula range includes

Euro-precision “Pride of India” rangewith Jai’s Indian cost advantage

©

Pan woodGrand

TM©

For detail information & expert guidance contact

, Gujarat-India. • web : www.JAIindustries.com

Visit to see m/cs on display at Asia’s biggest machinemall :

World-class panel processing m/cs

TM©

European panel and wood-work m/cs

TURANLAR

©

02 04 12

T H E C O M PA N Y T H E L E A D E R

A total of 225,000 sq. ft. of manufacturing floor. Spread over

6 units engaged into divided task of various machinery mfg.

Peopled with most skillful and experienced workers, expert

engineers, sales & service professionals, totaling 550 in all.

Resulting into an installation of over 300,000 machines !

www.JAIindustries.com

Manufacturing Muscles & people-power

Jai Industies has grown to the leadership position from a

humble standing, so we know the value of innovation &

technology updates for mfg processes. Jai identifies wood-

work industries’ needs, work-out quality & cost compatible

solutions that results in the utmost value for money for

customers.

Ever improving engineering expertise

The management is based on proven professional

systems, but relies on personal rapport between people. To

make it work all key posts are held by people who are with

JAI since 15 to 30 years. Well organized and responsive

teams look after complete customer satisfaction in sales-

service & spares’ support.

Professional mgmt., reliable sales & service

JAI since 1965, made the m/cs available nearest to

customers, reducing delivery & service time. With around

150 dealer outlets, exclusive machine-malls in all major

cities and Asia’s biggest ‘Pan’wood Grand’ at Ahmedabad.

JAI is exported to many continents, making its presence felt

worldwide.

Asia’s biggest Machine-mall, India’s best network

Scm Group is an Italian giant with 18 factories, 23

subsidiaries; it is one of the world’s top manufacturer.Turanlar is a Turkish company. It is known for its

innovative & unique m/cs in this industry. Together both

of them stand for ultimate European quality m/cs.

manavm

edia

.com

Documents

Wudpro