WinartoT r a i n i n g C e n t e r

CV. Winarto Training Center

COMPANYprofile

WINARTO Fixed Detector

Installation

Jl.Cempaka Baru VII No.39Jakarta 10640

Telephone: +62-21-42 888 222Facsimile : +62-21-420 7536

www.winartotrainingcenter.co.id

Let’sMake

ACCIDEN

TSZERO

Protecting workers and equipment from gas hazards is a major concern for companies. One method of doing this is by installing and maintaining a fixed-point gas detection system. A fixed-point gas detection system consists of sensors (typically electrochemical, infrared, or catalytic bead) that respond to specific gases. These sensors are placed throughout the facility. The gas readings from the sensors are transmitted from all over the facility, back to a single or multiple monitoring station.

These signals can consist of anything from analog 4-20 mA signals, high speed digital signals, or even a wireless data transmission. There are even a few products on the market today that offer both analog and digital interfaces as well as seamless integration with wireless telemetry products. Once the signal is received, the controller processes the gas readings and responds to any alarm condition that might be present by turning on strobe lights, sirens, actuating a valve, or starting/stopping a process. This is a complex system of highly integrated components, with a gas detector being the crucial component.

Supported by:

G a s a n d F l a m e D e t e c t i o n

usAbout Who We Are:

Winarto Training Center is A company with specific safety training and with other services related with toxic and flammable gas.

Winarto Training Center was established in 2012 in Jakarta, Winarto Training Center provides training for H2S Safety awareness level II, Confined Space, Authorized Gas Tester. Other services was provided by Winarto Training Center are Fixed sensor installation and commissioning, Gas Detector Calibration, rental isolation chamber for welding activity in hazardous area.

Owner and Director, Winarto, is available to personally assist you.

Our Mission:

Building relationships with our customers and suppliers to ensure excellence and service is never compromised.

Our Goals:

Our goal is to provide quality training, and services to our customers at competitive prices and to provide service that is both professional and personal and meets your quality needs and standards.

Our Commitment:

Winarto Training Center staff is highly qualified in training, fixed detector installation, Detector calibration and rental welding habitat. Our extensive experience with training and sensor calibration ensures a dedication to integrity and service.

Because every customer is seeking to meet unique challenges we offer training qualified, priority calibration, and satisfactory services. We pride ourselves on being flexible to meet any customer requirements.

Our Clients:

PT. i-Tech Solution

H2S Safety Awareness training

H2S, or Hydrogen Sulphide, constitutes a serious danger to human lives. Working in an environment exposed to the risk of the poisonous gas H2S, requires constant awareness. Our H2S course is especially designed to provide participants with key competencies in identifying and managing H2S hazards in the workplace.Through a combination of classroom theory and practical exercises, our participants will gain the necessary knowledge in order to behave correctly in a H2S environment.Our training instructors are highly skilled professionals with 'real world' experience and our courses consist of both classroom theory and practical exercises.

Confined Space Training

When entering confined spaces you might enter a hazardous environment and the necessary precautions must be taken. Before entering confined spaces you need training in how to protect yourselves and others.Through a combination of classroom theory and practical exercises, our participants will gain the necessary knowledge in order to behave correctly when entering a confined space. At our Confined Space Course you will be introduced to the essential facts of the dangers to be considered when entering a confined space, as well as learn the life saving measures to be taken.

Authorized Gas Tester Training

Gas Tester is mandatory when working in area within gas potential. In AGT training program is to ensure that personnel preparing for a gas tester role are equipped with the knowledge to conduct gas tests for oxygen levels, flammable and toxic gases safely. Their gas testing skills must be assessed either in the workplace or at an approved training centre against the competence units specified.This training program also equips the delegate with knowledge to conduct gas testing within confined spaces and awareness of associated confined space hazards. Delegates will also learn about relevant legislative requirements, gas measuring and monitoring equipment and documenting gas test results.

WINARTO Training WINARTO Calibration

WINARTO Welding Habitat

PosiChek SCBA test has been the industry standard for thousands of fire departments, refineries, chemical plants and nuclear power stations worldwide since it was first introduced in 1988. A number of upgrades have been incorporated to keep pace with increasingly rigorous testing criteria. Firefighters and other first responders can only work as well as the equipment they use. That is why NFPA 1852 mandates that all compliant SCBA be tested on a calibrated breathing machine before being put into service, and at least once per year thereafter. PosiChek3 meets these stringent NFPA standards.

PosiChek Advantages- Tests positive face piece pressure at two breathing rates: Standard

work and Maximum work- Tests the SCBA functions for a range of simulated cylinder pressures

to ensure that the SCBA works as well with a depleted tank as it did with a full cylinder

- Tests for low exhalation resistance stay at all work rates. A low exhalation resistance means user comfort and minimum leakage around the face piece

- Tests face piece static pressure against manufacturer's standards- Test the pressure gauge and low pressure alarm function properly- Tests for high pressure or low pressure system leaks

WINARTO Posicheck

Positive Pressure Welding Enclosure (PPWE)PPWE are used to create a safe module within a hazardous area to allow field welding be conducted in place or at times when it could otherwise be impractical or prohibited. The PPWE two main objectives are:· To contain sparks from hot work inside the habitat and thus prevent

them from reaching flammable gas.· To prevent flammable gas from entering the habitat by using internal

overpressure.The PPWE are typically used for:· Hot work at Zone 1· Hot work at Zone 2· Maintaining ambient temperatures for coating or insulation work where

containment is an important requirement.

Portable and Fixed Gas Detector

Winarto Training Center prides itself on providing a true calibration service. Your equipment is evaluated for appearance, acclimation requirements and performance to the manufacturer's specifications. Equipment is adjusted and recalibrated to specifications with before and after data provided. Our Client Services Specialist works closely with all team members to assure that our client's quality requirements needs are met. Our primary goal is to provide top notch services in a timely manner.

We offer free local pick-ups and delivery without minimum of units, on-sitecalibration and repair services. Emergency and expedited services provided by arrangement.

Local Pick-Ups & Return Calibration:

Our local Pick-up and Return Calibration service provides reliable service and convenient door to door service for those businesses in the surrounding areas.

We also accept on a continuing basis, equipment shipped or delivered to our facilities. Turnaround time is 5-8 days.

On-Site Calibration:

Winarto Training Center can schedule onsite calibration services at your convenience in the Indonesia area. There are no In Jakarta travel charges. Out-of-Jakarta charges will be included in your quote. Work is performed with minimal disruption, and detailed documentation – data sheets and certificates are provided. Available in hard copy and/or CD at no extra charge to the customer.

Repair Services:

Winarto Training Center provides comprehensive equipment repair services in conjunction with calibration. Repair services can be scheduled with any of our Pick-Ups & Return or On-site calibration services. Save time and increase productivity by combining equipment repair along with the certification process. By choosing Winarto Training Center for your gas maintenance and calibration, you gain access to an unrivalled network of expertise and skill.