Ws mechanical catalogue2015

C o n n e c t i n g G r e a t M i n d s

MECHANICALENGINEERING

2015Catalogue

Mech Cover 2015.indd 1 7/7/14 11:52 AM

HighlightsHighlightsHighlights Mechanical Engineering Catalogue 2015

page 4

page 7

page 10

page 12

page 5

page 6

page 9

page 10

page 13

page 5

page 6

page 7

page 10

page 12

page 6

page 6

page 9 page 10

page 10

page 14

by Bradley Dodd (Imperial College London, UK) &

Yilong Bai (Chinese Academy of Sciences, China)

by Chee Kai Chua & Kah Fai Leong (Nanyang

Technological University, Singapore)

edited by Vladislav Manti (University of Seville, Spain)

by G R Liu (University of Cincinnati, USA) & G Y Zhang (The University

of Western Australia)

by Godfrey Onwubolu (Humber College of

Technology & Advanced Learning, Canada)

edited by Esmaiel Jabbari (Uni of South Carolina, USA), Deok-Ho Kim (Uni of Washington, USA), Luke P Lee (Uni of California, Berkeley, USA), Amir Ghaemmaghami (Univ of

Nottingham, UK) & Ali Khademhosseini (Harvard Univ, USA & Massachusetts Institute of Technology, USA)

by Joël Mispelter (INSERM, France & Curie Institute, France),

Mihaela Lupu (Curie Institute, France) & AndréBriguet (Uni

Claude Bernard Lyon 1, France)

by Kelvin K L Wong & Jiyuan Tu (RMIT Uni, Australia), Zhonghua Sun (Curtin Uni Australia) & Don W Dissanayake

(Uni of Adelaide, Australia)

edited by Shu Chien, Peter C Y Chen & Y C Fung (Uni of California, San Diego, USA)

by Peter D M Spelt (Imperial College London, UK), Stephen J Shaw (Xi’an Jiaotong — Uni of Liverpool,

Suzhou, China) & Hang Ding (Uni of California, Santa Barbara, USA)

by Wen Ho Lee (National Cheng Kung Uni, Tainan,Taiwan & Feng Chia

Uni, Taichung, Taiwan)

edited by Syouji Nakamura (Kinjo Gakuin Uni, Japan), Cun Hua Qian (NanjingUni of

Technology, China) & Mingchih Chen(Fe Jen Catholic Uni Taiwan)

by Mayada Omer(Stevens Institute of Technology, USA)

edited by Chun-Hung Chen (George Mason Uni, USA & National Taiwan Uni, Taiwan), Qing-Shan Jia (Tsinghua Uni, China) &

Loo Hay Lee (National Uni of Singapore)

by Gabi Ben-Dor, AnatolyDubinsky &

Tov Elperin (Ben-Gurion University of the Negev, Israel)

by M L Munjal (Indian Institute of Science,

India)

by David W A Rees (Brunel Uni, UK)

by David W A Rees (Brunel Uni, UK)

by J Michael Bennett(Uni of Ontario, Canada) & Danny S. K. Ho (NFA Estimation Inc., Canada)

by Anatoly V Perelmuter (SCAD Soft, Ukraine) & Vladimir Slivker (Institute Giprostroymost, Russia)


World Scienti c and Imperial College PressWorld Scientific is the co-founder of Imperial College Press, which is a joint venture between Imperial College of Science, Technology and Medicine (London, UK) and World Scienti c. We bring together the experience of an internationally-recognized institution of higher education and that of an established academic publisher.

World Scienti c is the distributor for National Academies Press in Asia-Paci c (excluding Japan, New Zealand and Australia) and the Mathematical Society of Japan globally, except for North America. We also market Now Publishers titles globally.

How to OrderPlease complete the order form on page 18 of this catalogue and return it to a World Scienti c of ce nearest to you. Alternatively, you may wish to contact our representatives.

You can also order online at www.worldscienti c.com or from your regular bookseller.

Textbook Inspection CopiesThese are available upon request to lecturers for textbook adoption purposes. Please email us at [email protected] or visit our website at www.worldscientific.com/page/inspection-copy.

Interested in Writing a Book?We would be delighted to hear from you if you are considering writing a book. Please contact any of our worldwide of ces or email us at editor@worldscienti c.com for more information. Alternatively, you can visit our websi te at www.worldscientif ic.com and www.icpress.co.uk.

Other CataloguesWe have produced these catalogues of related interest for the year 2015. Please email us at [email protected] to request for any of them.

• Biomedical Sciences • Business & Management • Chemistry • Civil Engineering • Computer Science • Economics/Finance • Environmental Science• Mathematics • Mechanical Engineering • Nonlinear Science • Physics • Popular Science

Stay UpdatedJoin our Mailing List to be informed of our latest publications, worldwide conferences, special offers on our books and journals, and much more!

To join, please visit our website at www.worldscienti c.com/page/newsletter-sign-up.

Or email your contact information to us at [email protected] with “Subscribe to Civil Engineering” in the subject line.

c o n t e n t s

Applications ....................................................4

Bioengineering ..............................................6

Chemical Engineering .................................8

Fluid Dynamics ..............................................9

Industrial and Systems Engineering .....10

Materials in Engineering ...........................11

Mechanical Engineering ...........................12

Project Management .................................13

Robotics .........................................................13

Stability and Structures ............................14

Thermal Engineering/Packaging ...........15

General ...........................................................15

Bestselling Backlist .....................................16

Proceedings. ..................................................16

Title Index ......................................................17

Author Index ................................................17

Order Form ....................................................18

Get alerted about:• Subscriber Discount• New and forthcoming publications• Free online chapters• New book reviews• Podcasts and videos of author interviews• Useful tips in research

Sign up now @ www.worldscientific.com/page/newsletter-sign-up

over 500,000 subscribers who receive our email newsletters. Join

Me

ch

an

ica

l E

ng

ine

eri

ng

Mech Engrg 2015 F.indd 3 7/10/14 10:49 AM

Mechanical Engineering Catalogue 2015

4

:: NEWAPPLIED MECHANICS WITH SOLIDWORKSby Godfrey Onwubolu (Sheridan Institute of Technology & Advanced Learning, Canada)

Contents: Forces, Vectors, and Resultants; Moments and Couple; Two-Dimensional Equilibrium; Structures and Members; Three-Dimensional Equilibrium; Friction; Centroid; Mass Moment of Inertia; Kinematics: Linear & Projectiles; Kinematics: Angular Motion; Kinematics: Plane Motion of Mechanisms; Kinetics: Impulse and Momentum; Kinetics: Work and Energy; Kinetics: Force & Torque Inertia.

Readership: University and college students undertaking mechanical, aerospace, electromechanical, engineering or applied mechanics programs.

420pp Feb 2015978-1-78326-380-6 US$84 £55

:: NEWASYMPTOTIC THEORY OF ANISOTROPIC PLATES AND SHELLSby Lenser Aghalovyan (National Academy of Sciences, Armenia)translated by D Prikazchikov

Key Features: The book exposits consistent theory for composite thin walled elastic

structures. The obtained results are applied to justification and refinement of ad hoc engineering structural theories

The effective solutions of a variety of boundary value problems are obtained

There is a clear potential for numerous advanced industrial applications

Readership: Researchers and specialists in mechanical engineering, undergraduates and graduate students.

400pp Aug 2015978-981-4579-02-5 US$125 £83

:: NEWINTRODUCTION TO ADIABATIC SHEAR LOCALIZATION REVISED EDITIONby Bradley Dodd (Imperial College London, UK) &Yilong Bai (Chinese Academy of Sciences, China)

“This book will fill a gap for an introductory text on adiabatic shear, targeting undergraduate and post-graduate level. The exposition of the subject is well balanced with all the necessary ingredients: introduction, modelling, mathematical aspects, numerical methods, experiments and applications.”

Dr Theodoros KatsaounisAssociate Professor

University of Crete

Readership: Graduate and undergraduate students interested in adiabatic shear.

460pp Oct 2014978-1-78326-432-2 US$115 £76978-1-78326-433-9(pbk) US$68 £45

i l th d

Applications Journal

INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS IJCM http://www.worldscientific.com/ijcm

Chief EditorG R Liu (University of Cincinnati, USA)

About IJCM: Aims and Scope The purpose of this journal is to provide a unique forum for the fast publication and rapid dissemination of original research results and innovative ideas on the state-of-the-art on computational methods. The methods should be innovative and of high scholarly, academic and practical value.

The journal is devoted to all aspects of modern computational methods and the articles can involve theory, algorithm, programming, coding, numerical simulation and/or novel application of computational techniques to problems in engineering, science, and other disciplines related to computations. The journal places a great emphasis on creativity, novelty and innovation of computational methods. It aims to become the major platform that archives the history of the technical development of new generations of computational methods.

Abstracting/Indexing: Compendex | INSPEC | Journal Citation Reports/Science Edition | Science Citation Index Expanded (also known as SciSearch®) | Scopus | Zentralblatt MATH

Check out the FREE articles

online!

twitter.com/worldscienti c

facebook.com/worldscienti c

twitter.com/ImperialCPress

facebook.com/imperialcollegepress


5

WORLD SCIENTIFIC ~ IMPERIAL COLLEGE PRESSFor more information, visit: www.worldscienti c.com

Journal:: NEWCOMPUTER MODELING USING PARTICLE METHODSby M B Liu (Chinese Academy of Science, China) & G R Liu (University of Cincinnati, USA)

Contents: Introduction; Particle Methods with Background Mesh; Molecular Dynamics; Dissipative Particle Dynamics; Smoothed Particle Hydrodynamics; Special Topics of Particle Methods; Multiple Scale Simulation Using Particle Methods; Computer Implementation Issues of Particle Methods

Readership: Undergraduates, graduates, researchers, and professionals studying/dealing with fluid mechanics, numerical analysis and computational mathematics, engineering mechanics, ocean engineering, mechanical engineering.

350pp Dec 2014978-981-4571-69-2 US$105 £69

:: NEW3D PRINTING AND ADDITIVE MANUFACTURING: PRINCIPLES AND APPLICATIONSFourth Edition of Rapid Prototyping (with Companion CD-ROM) by Chee Kai Chua & Kah Fai Leong (Nanyang Technological University, Singapore)

“This is the most comprehensive and relevant textbook in the field of 3D Printing and Additive Manufacturing. Whenever I teach subjects related to rapid product development I use this book as a reference. My students appreciate the easy way the information is introduced very much. This is an excellent book for both undergraduate and postgraduate students.”

Paulo Jorge BártoloPolytechnic Institute of Leiria, Portugal

Readership: Secondary school students, junior college students, diploma and advanced diploma students, undergraduates, postgraduates, consultants, academics, researchers and professionals in mechanical and industrial engineering.

600pp Jan 2015978-981-4571-40-1 US$129 £85978-981-4571-41-8(pbk) US$68 £45

Computational and Experimental Methods in Structures - Vol 5MATHEMATICAL METHODS AND MODELS IN COMPOSITESedited by Vladislav Manti (University of Seville, Spain)

Key Features: Competing titles are much more specialized - providing in-

depth treatments but of only one area of research related to composites. Contributing authors are worldwide prominent experts in the very different areas of applied mathematics, physics and engineering related to composites

Especially suitable for young researchers showing a great variety of different approaches available today to model composites manufacturing, behavior and damage mechanisms. This unique volume allows them to find different approaches to related problems, to realize possible connections between them, and to finally take advantage of the already existing in-depth results related to composites in sometimes apparently very distant scientific fields

Readership: Graduate students and researchers in composite engineering.

520pp Dec 2013978-1-84816-784-1 US$158 £104

INTERNATIONAL JOURNAL OF MODELING, SIMULATION, AND SCIENTIFIC COMPUTING IJMSSChttp://www.worldscientific.com/ijmssc

About IJMSSC: Aims and Scope This is a quarterly journal which deals with the fields of system modeling, simulation and scientific computing. The scope of the journal covers, but is not limited to:

• Modeling theory and methodology for complex systems, system simulation theory and methodology

• Complex applications of high level simulation languages, Multi-parameter Optimization in simulation

• Verification, validation and accreditation of theory and technology

• Finite element methods, finite difference methods, Approximation theory

• Distributed/High-Performance/Pervasive/Grid/Cloud Computing, Bioinformatics/Data-Mining, High Performance simulation technology

• Computational electromagnetics, electrodynamics, fluid dynamics, computational heat, mass, and momentum transfer

• M&S technology of continuous systems/discrete systems/hybrid systems/Intelligent systems, complex systems/open systems/huge systems

• SBA/virtual prototyping engineering technology

• Simulation language methodology, supporting platforms, application techniques

Abstracting/Indexing: Compendex | Scopus Online Gateways: CNPIEC | CrossRef | EBSCOhost Electronic Journals Service | Google Scholar | J-Gate | OCLC FirstSearch | SwetsWise


online!

With CD-ROM



6

Bioengineering

SMOOTHED POINT INTERPOLATION METHODS: G SPACE THEORY AND WEAKENED WEAK FORMSby G R Liu (University of Cincinnati, USA)& G Y Zhang (The University of Western Australia, Australia)

This important book describes the various S-PIM models in a systematic, concise and easy-to-understand manner. The underlying principles for the next generation of computational methods, G space theory, novel weakened weak (W2) formulations, techniques for shape functions, formulation procedures, and implementation strategies are presented in detail. Numerous examples are provided to demonstrate the efficiency and accuracy of the S-PIM solutions in comparison with the FEM and other existing methods.

Readership: Researchers, practitioners, academics, and graduate students in engineering mechanics, mechanical engineering, aerospace engineering, civil engineering and computational physics.

696pp Nov 2013978-981-4452-84-7 US$168 £111

COMPUTERAIDED ENGINEERING DESIGN WITH SOLIDWORKSby Godfrey Onwubolu (Humber College of Technology & Advanced Learning, Canada)

Contents: Sol idWorks Pr incip les in Engineering Design: SolidWorks Overview; Sketch Entit ies and Tools; Features; Intermediate Part Modeling; Advanced Part Modeling; Revolved, Swept, and Lofted Parts; Assembly Modeling; Part and Assembly Drawings; Configurations and Design Tables; Surface ModelingSolidWorks Applications in Manufacturing Processes, Mechanical Systems and Engineering Analysis: Mold Design; Sheet Metal Part Design; Die Design; Weldments; Routings: Piping and Tubing; Power Transmission Elements; Cam Design; Mechanism Design Using Blocks; Threads and Fasteners; Finite Element Analysis Using SolidWorks.

Readership: Advanced undergraduates and graduate students, academia and researchers in mechanical engineering and other areas in this field.

744pp May 2013978-1-84816-665-3 US$98 £65

esign Tables; Surface

:: NEWBIOPRINTING: PRINCIPLES AND APPLICATIONSby Chee Kai Chua & Wai Yee Yeong (Nanyang Technological University, Singapore)

Contents: Tissue Engineering; Scaffolds for Tissue Engineering; Bioprinting Techniques; Materials for Bioprinting; Cell Processing; 3D Cell Culture Techniques; Computational Design and Simulation; Multi-Disciplinary Approaches in Bioprinting; Applications of Bioprinting.

Readership: Senior undergraduates, researcher students in tissue engineering, general public and professional.

350pp Jan 2015978-981-4612-10-4 US$78 £51

:: NEWNMR PROBEHEADS FOR BIOPHYSICAL AND BIOMEDICAL EXPERIMENTSTheoretical Principles and Practical Guidelines 2ND EDITIONby Joël Mispelter (INSERM, France & Curie Institute, France), Mihaela Lupu (Curie Institute, France) & AndréBriguet (University Claude Bernard Lyon 1, France)

Contents: Introduction; Relating the Probe Resonator to the Spectrometer; Probe Components (Choice of RF Coil Components Specifically Designed for NMR Experiments), Practical Hints; Quadrature Driving; Multiple Frequencies Tuning; Linear Circuit Simulation; Magnetic Field Amplitude Estimation; Homogeneous Resonators; Heterogeneous Resonators, Combination of Coils; Probe Evaluation and Debugging.

Readership: Bioengineers, biomedical researchers and non-experts in RF technology willing to acquire basic knowledge on RF sensors design; inquisitive user of an NMR spectrometer could be interested in some “knowing-how” about this “black box”.

600pp Mar 2015978-1-84816-662-2 US$148 £92

:: NEWWorld Scientific Series in Nanoscience and Nanotechnology Volumes 9HANDBOOK OF BIOMIMETICS AND BIOINSPIRATION (In 3 Volumes)Biologically-Driven Engineering of Materials, Processes, Devices, and Systems edited by Esmaiel Jabbari (University of South Carolina, USA), Deok-Ho Kim (University of Washington, USA), Luke P Lee (University of California, Berkeley, USA), Amir Ghaemmaghami (University of Nottingham, UK) & Ali Khademhosseini (Harvard University, USA & Massachusetts Institute of Technology, USA)

“This three-volume set brings together contributions from an international group of distinguished scientists and engineers in the areas of Bioinspired Materials, Electromechanical Systems, and Tissue Engineering. Edited by faculty from top research groups in the US and UK, this reference on Biomimetics is an invaluable resource providing a comprehensive coverage of the latest advances in this important area of great value for scientists, engineers, and physicians working at the intersection of biology, life sciences, and materials.” Joel R Fried

Professor and ChairCollege of Engineering,

Florida A&M and Florida State Universities

Readership: Undergraduate and graduate students studying bioengineering, and researchers, engineers, chemists, biologists, physicists, material scientists and physicians.

1464pp May 2014978-981-4354-92-9 US$850 £561


7


:: NEWBIOENGINEERING FLUID MECHANICSby Tin-Kan Hung (University of Pittsburgh, USA)

Contents: Basic Consideration; Fluid Static and Flow Description; One-Dimensional Analysis; Differential Equations for Fluid Motion; Differential Equations for Elastic and Poroelastic Media; Wave Equations for Fluids and Solids; The Work Energy Equation and the Generalized Bernoulli Equation; Dimensional Analysis and Model Law; Wave Equations for One-Dimensional Analysis; Blood Flows in Microcirculation; Peristaltic Flows; Axisymmetric Pulsating Blood Flows; Blood Flows in Curved Arteries; Hemodynamic Information in Echocardiogram; Diffusion and Membrane Oxygenation.

Readership: Researchers, professionals, academics, graduate and advanced undergraduate students in biomedical engineering, engineering mechanics, mechanical & aerospace engineering, chemical engineering and civil & environmental engineering.

200pp Dec 2014978-981-4295-15-4 US$68 £45

:: BestsellerMETHODS IN RESEARCH AND DEVELOPMENT OF BIOMEDICAL DEVICESby Kelvin K L Wong (RMIT University, Australia), Jiyuan Tu (RMIT University, Australia), Zhonghua Sun (Curtin University, Australia) & Don W Dissanayake (University of Adelaide, Australia)

Contents: Introduction; Overview of Biomedical Technologies; Conceptualisation and Medical Image-Based Modelling; Medical Imaging and Visualisation; Treatment of Aneurysms; Endovascular Stent Grafts; Nasal Drug Delivery; Biomedical MEMS Micropump; Engineering and Production Management for Biomedical Devices.

Readership: Engineers, doctors and students in the biomedical and biomechanical engineering, and radiology fields.

196pp Mar 2013978-981-4434-99-7 US$98 £65

E d l

:: BestsellerAdvanced Series in Biomechanics - Vol 4AN INTRODUCTORY TEXT TO BIOENGINEERINGedited by Shu Chien, Peter C Y Chen & Y C Fung (University of California, San Diego, USA)

This bestselling textbook will introduce undergraduate bioengineering students to the fundamental concepts and techniques, with the basic theme of integrative bioengineering. It covers bioengineering of several body systems, organs, tissues, and cells, integrating physiology at these levels with engineering concepts and approaches; novel developments in tissue engineering, regenerative medicine, nanoscience and nanotechnology; state-of-the-art knowledge in systems biology and bioinformatics; and socio-economic aspects of bioengineering.

Readership: Bioengineering undergraduates and students from other engineering and biomedical disciplines who are interested in having an overview of the discipline of bioengineering; postdoctoral fellows, research scientists, faculty and scientists in industry, government and other institutions.

564pp Aug 2008978-981-270-793-2 US$110 £73978-981-270-794-9(pbk) US$61 £40

t th l l ith

Journal

8 issues starting from 2014!

INTERNATIONAL JOURNAL OFNEURAL SYSTEMS IJNS http://www.worldscientific.com/ijns

Editor-in-ChiefHojjat Adeli currently holds the Abba G. Lichtenstein Professorship at The Ohio State University. He has authored over 500 scientific publications including 14 books since he received his Ph.D. from Stanford University in 1976 at the age

of 26. In 1998 he received OSU’s highest research honor, the Distinguished Scholar Award “ in recognition of extraordinary accomplishment in research and scholarship”. In 2007 he received the Peter L. and Clara M. Scott Award for Excellence in Engineering Education as well as Charles E. MacQuigg Outstanding Teaching Award. He is a Distinguished Member of ASCE and a Fellow of AAAS and IEEE. He has been a Keynote Lecturer at 85 research conferences held in 6 continents and 43 countries. He is featured in Buckeye Wall of Brilliance at the Ohio Union on the campus of The Ohio State University. Dr Adeli has been conferred Fellow by the American Neurological Association.

About IJNS: Aims and Scope The International Journal of Neural Systems is a bimonthly peer-reviewed journal which covers information processing in natural and artificial neural systems. The journal presents a fresh, undogmatic attitude towards this multi-disciplinary field, aiming to be a forum for novel ideas and improved understanding of collective and cooperative phenomena in systems with computational capabilities.

Abstracting/Indexing: Compendex | CompuMath Citation Index | Computer Abstracts | CSA Neurosciences Abstracts | Current Contents®/Engineering, Computing, and Technology | DBLP Computer Science Bibliography | INSPEC | io-port.net | ISI Alerting Services | PubMed | Science Citation Index Expanded | Scopus | Zentralblatt MATH

Mech Engrg 2015 F.indd 7 7/10/14 2:04 PM


8

Chemical Engineering

:: NEWAdvances in Process Systems Engineering - Vol 4COMPUTATION OF MATHEMATICAL MODELS FOR COMPLEX INDUSTRIAL PROCESSESby Yu-Chu Tian (Queensland University of Technology, Australia), Tonghua Zhang (Curtin University of Technology, Australia), Hongmei Yao (Curtin University of Technology, Australia) & Moses O Tadé (Curtin University of Technology, Australia)

Contents: Introduction; Fundamentals of Industrial Computing; Finite Difference Methods; The Wavelet-Collocation Method; The Wavelet-Galerkin Method; High Resolution Methods; Comparative Studies of Various Methods.

Readership: Students, academics and practitioners in the field of chemical engineering, numerical analysis and computational mathematics.

500pp Aug 2014978-981-4360-93-7 US$150 £99

:: NEWAdvances in Chemical and Process Engineering - Vol 2GAS HYDRATES AND FLOW ASSURANCEby Bahman Tohidi (Heriot-Watt University, UK)

Contents: Importance of Gas Hydrates; Gas Hydrates in Sediments; Positive Applications of Gas Hydrates; Experimental Techniques; Predictive Techniques; Gas Hydrates Formation in Pipelines; Avoiding Gas Hydrates Problems; Novel Techniques in Flow Assurance; Case Studies.

Readership: Postgraduates, researchers and industrialists in the oil and gas sector.

150pp Aug 2015978-1-84816-594-6 US$68 £45

:: BestsellerAdvances in Chemical and Process Engineering - Vol 1MATERIAL AND ENERGY BALANCES FOR ENGINEERS AND ENVIRONMENTALISTSby Colin Oloman (University of British Columbia, Canada)

Contents: Acknowledgements; Nomenclature; List of Equations; List of Examples; Glossary; An Introduction; The General Balance Equation; Process Variables and Their Relationships; Material and Energy Balances in Process Engineering; Material Balances; Energy Balances; Simultaneous Material and Energy Balances; Unsteady-State Material and Energy Balances; Epilogue; Index.

Readership: Undergraduates in engineering and industrial chemistry (and science); graduates in engineering (and science) for review of core material; professional engineers (and scientists) for review of core material; other professionals", such as those in economics, geography and the environmental or social sciences, for guidance on quantitative methods for assessing the “triple bottom line” of the industrial economy.

296pp Jun 2009978-1-84816-368-3 US$80 £53978-1-84816-369-0(pbk) US$55 £36

it Diff M th d

Journal


online!

BIOMEDICAL ENGINEERING: APPLICATIONS, BASIS AND COMMUNICATIONS BMEhttp://www.worldscientific.com/bme

Editor-in-ChiefWang, Jaw-Lin (National Taiwan University, Taiwan)

About BME: Aims and Scope Biomedical Engineering: Applications, Basis and Communications is an international, interdisciplinary journal aiming at publishing up-to-date contributions on original clinical and basic research in the biomedical engineering. Research of biomedical engineering has grown tremendously in the past few decades. Meanwhile, several outstanding journals in the field have emerged, with different emphases and objectives. We hope this journal will serve as a new forum for both scientists and clinicians to share their ideas and the results of their studies.

Biomedical Engineering: Applications, Basis and Communications explores all facets of biomedical engineering, with emphasis on both the clinical and scientific aspects of the study. It covers the fields of bioelectronics, biomaterials, biomechanics, bioinformatics, nano-biological sciences and clinical engineering. The journal fulfils this aim by publishing regular research / clinical articles, short communications, technical notes and review papers. Papers from both basic research and clinical investigations will be considered.

Abstracting: Chemical Abstracts Service | Compendex | EMA | Emcare/Mosby’s Index | Embase | INSPEC | Science Citation Index Expanded (also known as SciSearch®) | Scopus


9


Fluid Dynamics

:: NEWAdvances in Computational Fluid Dynamics - Vol 1COMPUTATIONAL METHODS FOR TWOPHASE FLOWSby Peter D M Spelt (Imperial College London, UK), Stephen J Shaw (Xi'an Jiaotong — University of Liverpool, Suzhou, China) & Hang Ding (University of California, Santa Barbara, USA)

Contents: Interface Capturing and Tracking Methods; Coupling Two-Phase Navier – Stokes Solvers with Interface Capturing Methods; Basic Numerical Techniques; Issues in Interface Capturing; Adaptive Mesh Refinement; Complex Geometries; Numerical Methods for Asymptotic Regimes.

Readership: Scientists and engineers in the field of computational fluid dynamics of two-phase flows.

350pp Jan 2015978-981-4280-97-6 US$115 £76

:: BestsellerCOMPUTATIONAL METHODS FOR TWOPHASE FLOW AND PARTICLE TRANSPORT WITH CDROMby Wen Ho Lee (National Cheng Kung University, Tainan,Taiwan & Feng Chia University, Taichung, Taiwan)

Contents: Introduction; Differential Equations of the Two-Phase Flow System; Finite Differences of the Governing Equations; A Pressure Iteration Scheme for Two-Phase Flow Modeling; Pollution Particle Transport; Nuclear Fission; Radiation Hydrodynamics; Natural Convection between Two Heated Vertical Plates; Appendices: The Two-Phase Flow Computer Code; Photon Transport; Charge Particle Transport; Neutron Transport.

Readership: Undergraduate and graduate students studying mechanical engineering; professionals dealing with fluid mechanics, nuclear physics, and plasma physics in their day-to-day encounters — particularly the use of two-phase flows, and particle transport.

472pp May 2013978-981-4460-27-9(pbk) US$78 £51

:: BestsellerSMOOTHED PARTICLE HYDRODYNAMICSA Meshfree Particle Methodby G R Liu & M B Liu (National University of Singapore)

“Numerical simulations using the SPH method are a new area of research, and are still under development. These problems offer ample opportunities for researchers to develop more advanced methods as next generation numerical methods. The book can serve as a good start to efficiently learn, test, practise and develop such new methods.” Zentralblatt MATH

Readership: Researchers, practitioners, upper-level undergraduates, graduate students, and academics in computational mechanics and engineering.

472pp Oct 2003978-981-238-456-0 US$186 £122

Journal


online!

JOURNAL OFMULTISCALE MODELLING JMMhttp://www.worldscientific.com/jmm

Editor-in-ChiefM H Aliabadi (Imperial College London)

About JMM: Aims and Scope JMM is an international peer-reviewed journal that presents forefront fundamental works in the above field of research. It features timely scientific reports of advances in modelling and computation, theoretical breakthroughs and also contains interesting review articles about emerging issues. It also provides a common platform for exchange of views and presentation of original papers (theoretical, computational and experimental) with a general emphasis on Multiscale issues in this rapidly developing field. Papers reporting advancement of the theory and applications of single scale problems (i.e. Nano, Micro, etc.) which pave the way for multiscale implementation are also appropriate for the journal.

Abstracting/Indexing: Chemical Abstracts Service | Compendex INSPEC | Scopus

With CD-ROM

www.worldscienti c.com/page/newsletter-sign-up

www.worldscienti c.com/page/ecatalogues



10

Industrial and Systems Engineering

:: NEWSeries on Quality, Reliability and Engineering Statistics DESIGN FOR SIX SIGMA FOR ENGINEERSby Matthew Hu (Wayne State University, USA), Kai Yang (Wayne State University, USA), Michael Sheh (Engineous Software Inc., USA) & Malik Kayupov (Engineous Software Inc., USA)

Contents: Six Sigma and Design for Six Sigma Responsible Person: Introduction; Development and Problem Solving Processes: Axiomatic Design; Theory of Inventive Problem Solving (TRIZ), Quality Function Deployment (QFD); Taguchi’s Robust Engineering; Basic Statistics and Analytical Methods: Basic Statistics; Sampling Methodology; Improvement Methodologies; Reliability Assessments; Robustness Measurements; Application of Design for Six Sigma: Application of DFSS in Business Planning; Application of Product Development; Application in Manufacturing Process; Application in Troubleshooting Quality Problems; Tolerance Design.

Readership: Graduate students, engineers and industrialists interested in the Design for Six Sigma methodology.

500pp June 2015978-981-256-063-6 US$115 £76

RELIABILITY MODELING WITH APPLICATIONSEssays in Honor of Professor Toshio Nakagawaon His 70th Birthdayedited by Syouji Nakamura (Kinjo Gakuin University, Japan), Cun Hua Qian (NanjingUniversity of Technology, China) & Mingchih Chen(Fe Jen Catholic University, Taiwan)

Reliability modeling has been a major concern for engineers and managers engaged in high quality system designs. This book presents the recent advancement in reliability theory and reliability engineering.

Starting from maintenance policies, the book introduces reliability analysis to systems using stochastic processes to study their optimization problems. In this book, the authors will illustrate how these techniques of reliability are applied to solve optimization problems in computer, information and network systems.

Readership: Undergraduates and postgraduate students, researchers and designers in the areas of optimization, mathematical modeling, stochastic analysis and industrial engineering.

380pp Feb 2014978-981-4571-93-7 US$138 £91

Systems Research Series - Vol 3THE RESILIENCE OF NETWORKED INFRASTRUCTURE SYSTEMS: ANALYSIS AND MEASUREMENTby Mayada Omer (Stevens Institute of Technology, USA)

Contents: Introduction; Literature Review; Relationship Between Reliability, Robustness, Flexibility, Agility and Resilience; Resilience-Enabling Schemes; Measuring the Resilience of Networked Infrastructure Systems; Assessing the Resilience of the Global Internet Cable System; Assessing the Resilience of Road Transportation Networks; Assessing the Resilience of Maritime Transportation Systems; Assessing the Resilience of Enterprise Systems — An ITS Case Study; Conclusion.

Readership: From the undergraduate level through to research — as well as professionals and decision-makers involved in the development, analysis and evaluation of infrastructure systems.

236pp Sep 2013978-981-4452-81-6 US$105 £69

STOCHASTIC SIMULATION OPTIMIZATION FOR DISCRETE EVENT SYSTEMSPerturbation Analysis, Ordinal Optimization, and Beyondedited by Chun-Hung Chen (George Mason University, USA & National Taiwan University, Taiwan), Qing-Shan Jia (Tsinghua University, China) & Loo Hay Lee (National University of Singapore)

Contents: Part I: Perturbation Analysis: The IPA Calculus for Hybrid Systems; Smoothed Perturbation Analysis: A Retrospective and Prospective Look; Perturbation Analysis and Variance Reduction in Monte Carlo Simulation; Adjoints and Averaging; Infinitesimal Perturbation Analysis and Optimization Algorithms; Simulation-based Optimization of Failure-prone Continuous Flow Lines; Perturbation Analysis, Dynamic Programming, and BeyondPart II: Ordinal Optimization: Fundamentals of Ordinal Optimization; Optimal Computing Budget Allocation Framework; Nested Partitions; Applications of Ordinal Optimization.

Readership: Professionals in industrial and systems engineering, graduate reference for probability & statistics, stochastic analysis and general computer science, and research.

276pp Aug 2013978-981-4513-00-5 US$98 £65

i

HIGHSPEED PENETRATION DYNAMICSEngineering Models and Methodsby Gabi Ben-Dor (Ben-Gurion University of the Negev, Israel), Anatoly Dubinsky (Ben-Gurion University of the Negev, Israel) & Tov Elperin (Ben-Gurion University of the Negev, Israel)

This monograph is a reliable and indispensable reference guide for anyone interested in using engineering models in high-speed penetration mechanics.

Readership: Professionals, academics, researchers and graduate students in engineering mechanics, mechanical engineering, materials science, civil engineering and ocean engineering.

696pp Aug 2013978-981-4439-04-6 US$158 £104

IISc Lecture Notes Series - Vol 3NOISE AND VIBRATION CONTROLby M L Munjal (Indian Institute of Science, India)

Contents: Noise and Its Measurement; Vibration and Its Measurement; Vibration Control; Acoustics of Rooms, Partitions, Enclosures and Barriers; Mufflers and Silencers; Noise Control Strategies.

Readership: Senior undergraduate mechanical engineering students, designers of industrial machinery and layouts, practicing engineers.

296pp Aug 2013978-981-4434-73-7 US$78 £51


11


Materials in EngineeringJournal

RESOLUTION OF THE20TH CENTURY CONUNDRUMIN ELASTIC STABILITYby Isaac Elishakoff (Florida Atlantic University, USA)

Contents: Introduction; Probabilistic Resolution; Hybrid Uncertainty in Imperfections and Axial Loading; Non-Probabilistic Resolution; Nontraditional Imperfections in Shells; Lower Bound for Buckling Load in the Presence of Uncertainty; Non-Probabilistic Uncertainty; Miscellaneous Topics.

Readership: Graduate Students, researchers, professionals.

496pp Jul 2014978-981-4583-53-4 US$138 £91

NONLOCAL CONTINUUM DAMAGE AND PLASTICITY: THEORY AND COMPUTATIONSby Rashid K Abu Al-Rub (Texas A&M University, USA)

Contents: Bridging of Length Scales; Classical Plasticity; Classical Continuum Damage Mechanics; Classical Coupled Damage and Plasticity; Nonlocal Theories; Nonlocal Elasticity; Nonlocal Damage; Nonlocal Plasticity; Coupled Nonlocal Damage and Plasticity; Structural and Material Size Effects; The Future.

Readership: Researchers in the academic community, national laboratories in materials and solid mechanics, companies in engineering mechanics and materials, and graduate students.

600pp May 2015978-981-281-397-8 US$158 £104

INTERNATIONAL JOURNAL OF RELIABILITY, QUALITY AND SAFETY ENGINEERING IJRQSE http://www.worldscientific.com/ijrqse

Editor-in-ChiefHoang Pham (Rutgers University)

About IJRQSE: Aims and Scope IJRQSE is a refereed journal focusing on both the theoretical and practical aspects of reliability, quality, and safety in engineering. The journal is intended to cover a broad spectrum of issues in manufacturing, computing, software, aerospace, control, nuclear systems, power systems, communication systems, and electronics. Papers are sought in the theoretical domain as well as in such practical fields as industry and laboratory research. The journal is published quarterly, March, June, September and December. It is intended to bridge the gap between the theoretical experts and practitioners in the academic, scientific, government, and business communities. Review articles and case studies are also welcome in addition to innovative works in all key areas of the journal.

Submission topics include but are not limited to the following: Reliability, quality assurance and engineering, software, algorithms, design and manufacturing, fuzzy logic, reliability growth and prediction, safety engineering, software testing and reliability, modeling and control issues, concurrent engineering, optimization of system reliability, performance analysis of systems, quality planning and measurements, risk assessment and analysis, fault-tolerant computing, and critical systems design.

Abstracting/Indexing: Chemical Abstracts | Compendex | CSA Aquatic Sciences and Fisheries Abstracts (ASFA) | CSA Health and Safety Abstracts | CSA Risk Abstracts | CSA Selected Water Resources Abstracts | Scopus


online!

SaveSave thetheenvironmentenvironmentShare this catalogue



12

Mechanical Engineering

:: BestsellerFUNDAMENTALS OF TRIBOLOGY 2ND EDITIONby Ramsey Gohar (Imperial College, UK), Homer Rahnejat (Loughborough University, UK)

Contents: Introduction to Tribology; The Nature of Rough Surfaces; Elastic Solids in Normal Contact; Dry Friction and Wear; Lubricant Properties; The Reynolds and Energy Equations; Thrust Bearings; Journal Bearings; Externally Pressurized (EP) Bearings; Elastohydrodynamic Lubrication (EHL); Fatigue Life of Rolling Element Bearings; Transient Elastohydrodynamic Lubrication; Nano-Tribology; Bio-Tribology.

Readership: Advanced undergraduates and PhD students starting their research, as well as practising engineers and scientists in industry.

460pp Mar 2012978-1-84816-860-2 US$90 £59

INTRODUCTION TO MICROMECHANICS AND NANOMECHANICS 2ND EDITIONby Shaofan Li (University of California, Berkeley, USA) &Gang Wang (Hong Kong University of Science and Technology, China)

Review of the First Edition“With many references and illustrations, this book certainly deserves the accolade far-reaching. The presentation of these results is necessary for people working in the fields of materials science, applied computational mechanics, nano-science and technology, and mechanical engineering.” Professor Huiling Duan, Beijing University

Readership: Researchers and educators in academics, and graduate students in engineering mechanics, nanomechanics, nanomaterials and nanostructure and mechanical engineering.

700pp Feb 2015978-981-4436-75-5 US$114 £75978-981-4436-76-2(pbk) US$64 £42

THE MECHANICS OF ENGINEERING STRUCTURESby David W A Rees (Brunel University, UK)

Contents: Historical Overview; Properties of Areas; Static Equilibrium; Basic Stress and Strain; Linear Elasticity; Bending and Shear; Slope and Deflection of Beams; Theories of Torsion; Buckling of Struts; Buckling of Plates and Tubes; Energy Methods; Plane Stress and Strain; Yield, Strength and Failure Criteria; Finite Elements.

Readership: Undergraduate and postgraduate engineering students from intermediary to advanced levels.

612pp Aug 2014978-1-78326-401-8 US$134 £88978-1-78326-408-7(pbk) US$68 £45

MECHANICS OF SOLIDS AND STRUCTURES 2ND EDITIONby David W A Rees (Brunel University, UK)

Contents: Stress and Strain Transformation; Plane Elasticity Theory; Structures with Symmetry; Bending of Beams and Plates; Theories of Torsion; Moment Distribution; Flexural Shear Flow; Energy Methods; Instability of Columns and Plates; Finite Elements; Yield and Strength Criteria; Plasticity and Collapse; Creep and Visco-elasticity; High and Low Cycle Fatigue; Fracture Mechanics; Appendices: Properties of Areas; Matrix Algebra; Stress Concentrations.

Readership: Undergraduate and graduate students of mechanical, aeronautical, civil, materials and design engineering.

760pp Apr 2015978-1-78326-395-0 US$122 £81978-1-78326-396-7(pbk) US$84 £55

Journal

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS JAMS

http://www.worldscientific.com/jams

Managing EditorDr. Gopalan Mukundan (Chrysler LLC)

Associate EditorsProf. Hojjat Adeli (Ohio State University)

Prof. Suren N. Dwivedi (ISAM)

Prof. Vijay Kumar Jain (Indian Institute of Technology, Kanpur)

Dr. Bernie Nadel (IntelliGineering Corp.)

Dr. Nezih Yaramanoglu(Unigraphics Solutions GmbH)

About JAMS: Aims and Scope Journal of Advanced Manufacturing Systems publishes original papers pertaining to state-of-the-art research and development, product development, process planning, resource planning, applications, and tools in the areas related to advanced manufacturing.

The journal addresses: Manufacturing Systems, Collaborative Design, Collaborative Decision Making, Product Simulation, In-Process Modeling, Resource Planning, Resource Simulation, Tooling Design, Planning and Scheduling, Virtual Reality Technologies and Applications, CAD/CAE/CAM Systems, Networking and Distribution, Supply Chain Management

Abstracting/IndexingCompendex | INSPEC | Scopus


online!


13


Project Management

Robotics

:: BestsellerFINITE ELEMENT METHODS FOR ENGINEERS 2ND EDITIONby Roger T Fenner (Imperial College London, UK)

Contents: Introduction and Structural Analysis; Continuum Mechanics Problems; Finite Element Analysis of Harmonic Problems; Finite Element Meshes; Some Harmonic Problems; Finite Element Analysis of Biharmonic Problems; Some Biharmonic Problems; Further Applications.

Readership: Students, graduate students, and academics in mechanical engineering, civil engineering and aeronautical engineering.

272pp Mar 2013978-1-84816-886-2 US$54 £36

PROJECT MANAGEMENT FOR ENGINEERSby J Michael Bennett(University of Ontario, Canada) & Danny S. K. Ho (NFA Estimation Inc., Canada)

Contents: The Need for Project Management in Engineering; The Eng ineer ing Pro jec t Management Context; Key Project Management Artifacts; Engineering Economics and Project Management; Requirements and Scope Management; Time Management; Cost Management; Quality Management; Human Resource Management; Communications Management; Risk Management; Procurement Management; Stakeholder Management; Ethics and Engineering Professionalism.

Readership: Advanced undergraduate and graduate students, practicing engineers and managers in the industry.

408pp Jun 2014978-981-4447-92-8 US$68 £45

ARTIFICIAL INTELLIGENCE: A GUIDE TO INTELLIGENT VEHICLEby Ming Xie (Nanyang Technological University, Singapore), Hui Chen (Tongji University, China) & Zhencheng Hu (Kumamoto University, Japan)

Contents: In-Vehicle Sensors; Visual Sensing and Perception; Sensor Fusion; Perception of Road; Perception of Environment; Perception of Occupant; Perception of Location; Vehicle Kinematics; Vehicle Motion Description; Global Route Planning; Local Maneuver Planning; Vehicle Dynamics; Basic Vehicle Motion Control; X-by-Wire Technologies; Advanced Vehicle Motion Control; Vehicle Interaction; Vehicle Cooperation.

Readership: Advanced undergraduate and graduate students in automotive engineering, mechanical engineering and computer science; researchers and practitioners in automotive industries.

300pp Jun 2015978-981-4271-63-9 US$88 £61

Journals

UNMANNED SYSTEMS UShttp://www.worldscientific.com/us

Editors-in-ChiefBen M. Chen (National University of Singapore) Lihua Xie (Nanyang Technological University, Singapore) Siva S. Banda (Air Force Research Laboratory, USA)

Unmanned Systems (US) aims to cover all subjects related to the development of automatic machine systems, which include advanced technologies in unmanned hardware platforms (aerial, ground, underwater and unconventional platforms), unmanned software systems, energy systems, modeling and control, communications systems, computer vision systems, sensing and information processing, navigation and path planning, computing, information fusion, multi-agent systems, mission management, machine intelligence, artificial intelligence, and innovative application case studies.

Latest Articles1. Development and Flight Test Evaluations of an Autonomous Obstacle

Avoidance System for a Rotary-Wing UAV (DOI: 10.1142/S2301385013500015)

2. Synthesis of Control Protocols for Autonomous Systems (DOI: 10.1142/S2301385013500027)

3. Dynamic Mission Planning for Communication Control in Multiple Unmanned Aircraft Teams (DOI: 10.1142/S2301385013500039)

4. A Computationally Efficient Approach to Trajectory Management for Coordinated Aerial Surveillance (DOI: 10.1142/S2301385013500040)

5. High-level Mission Specification and Planning for Collaborative Unmanned Aircraft Systems using Delegation (DOI: 10.1142/S2301385013500052)

6. Cooperative Search and Exploration in Robotic Networks (DOI: 10.1142/S2301385013500064)

7. Developments in Visual Servoing for Mobile Manipulation (DOI: 10.1142/S2301385013300011)

8. Dynamic Inversion-Based Nonlinear Aiming Point Guidance of Unmanned Aerial Vehicles for Reactive Obstacle Avoidance (DOI: 10.1142/S2301385013500076)

9. icarusLabs: An Adventure in Crowdsourcing (DOI: 10.1142/S2301385013400037)10. Enhanced UAS Surveillance Using a Video Utility Metric

(DOI: 10.1142/S2301385013500088)11. Development of an Unmanned Coaxial Rotorcraft for the DARPA UAVForge

Challenge (DOI: 10.1142/S2301385013400049)

INTERNATIONAL JOURNAL OFAPPLIED MECHANICS IJAMhttp://www.worldscientific.com/ijam

Editors-in-ChiefZishun LIU (Institute of High Performance Computing, Singapore)Tiejun WANG (Xi’an Jiaotong University, China)

EditorsHuajian GAO (Brown University, USA) Tianjian LU (Xi’an Jiaotong University, China) Zhigang SUO (Harvard University, USA)

Executive-EditorsMarkus J. BUEHLER (Massachusetts Institute of Technology, USA) Nick HILL (University of Glasgow, UK.) Xiaoyu LUO (University of Glasgow, UK)

About IJAM: Aims and Scope In addition to covering the classical branches of applied mechanics, namely solid mechanics, fluzid mechanics, thermodynamics, and material science, the journal encourages contributions from the newly emerging areas such as biomechanics, electromechanics, the mechanical behavior of advanced materials, nanomechanics, and many other inter-disciplinary research areas in which the concepts of applied mechanics are extensively applied and developed. It explores analytical, computational and experimental progresses in all the above mentioned areas.

Abstracting/Indexing: Compendex | Current Contents® /Engineering Computing and Technology | INSPEC | Journal Citation Reports/Science Edition | Science Citation Index Expanded (also known as SciSearch®) | Scopus



14

Journal

HANDBOOK OF MECHANICAL STABILITY IN ENGINEERING(In 3 Volumes) Vol. 1: General Theorems and Individual Members of Mechanical SystemsVol. 2: Stability of Elastically Deformable Mechanical Systems Vol. 3: More Challenges in Stability Theories and Codification Problemsby Anatoly V Perelmuter (SCAD Soft, Ukraine) & Vladimir Slivker (Institute Giprostroymost, Russia)

“This 3-volume work is a systematic presentation of mathematical statements and methods of solution for problems of structural stability. It also presents a connection between the solutions of the problems and the actual design practice. The target audience of the book includes researchers in engineering, developers of CAD software who investigate the stability of equilibrium of mechanical systems, and practical engineers that who use software tools in their daily work and are interested in knowing more about the theoretical foundations of the strength analysis. The book can be useful for senior students of engineering, and for the faculty of university departments where strength-related subjects of civil or mechanical engineering are taught.”

Professor Vadim N Gordeyev, Ukrainian Research and Design Institute of Steel Constructions and Professor Leonid A Rozin, St. Petersburg Polytechnic University

Readership: Research engineers; developers and users of CAD/CAE software tools; academics and students in mechanical & civil engineering.

1656pp May 2013978-981-4383-75-2(Set) US$790 £521

STRUCTURAL INTEGRITY CONSIDERATIONS IN ENGINEERING DESIGNIntroduction to Structural Integrity and Basic Fatigue Design (Volume I)by David W Hoeppner (University of Utah, USA)

Key Features: Discusses the systems-oriented, holistic approach to

structural integrity-based design, which has not been written about in any known book to this date, but is being employed in various industries and is gaining more applications daily

Significantly improves on the knowledge base available to engineers and scientists throughout the world, as common engineering education does not deal adequately with the subjects covered in this book

500pp May 2015978-1-86094-950-0 US$135 £89

Advanced Series on Ocean Engineering DYNAMICS OF FLOATING OFFSHORE STRUCTURESby Subrata K Chakrabarti (Offshore Structure Analysis, Inc., USA)

Contents: Introduction of Offshore Structures; Review of Fluid Mechanics; Environment and Wave Theories; Environmental Forces on Small Membered Structures; Environmental Forces on Large Membered Structures; Floating Structure Dynamics; Mooring System Analysis and Design; Statistical Description of Random Ocean Waves and Wind; Random Wave Loading and Responses; Offshore Floating System Analysis.

Readership: Senior undergraduate, graduates and researchers in offshore and ocean engineering.

600pp Aug 2015978-981-4280-55-6 US$95 £63978-981-4280-56-3(pbk) US$55 £36

STRAIN AND DISLOCATION GRADIENTS FROM DIFFRACTIONSpatially-Resolved Local Structure and Defectsedited by Rozaliya Barabash (Oak Ridge National Laboratory, USA), Gene Ice (Oak Ridge National Laboratory, USA)

Key Features: The book addresses the following three questions:

what is the current state-of-the-art in this field; what are the advantages, capabilities and limitations of competing methods; what are the practical tools needed for spatially-resolved diffraction methods

Readership: Researchers in X-ray science, materials science, applied physics, and mechanical engineering.

480pp May 2014978-1-908979-62-9 US$158 £104

Check out the FREE articles online!

INTERNATIONAL JOURNAL OF AIRCONDITIONING AND REFRIGERATION IJACR

http://www.worldscientific.com/ijacr

About IJACR: Aims and Scope As the only international journal in the field of air-conditioning and refrigeration in Asia, IJACR reports researches on the equipments for controlling indoor environment and cooling/refrigeration. It includes broad range of applications and underlying theories including fluid dynamics, thermodynamics, heat transfer, and nano/

Stability and Stuctures

bio-related technologies. In addition, it covers future energy technologies, such as fuel cell, wind turbine, solar cell/heat, geothermal energy and etc.

Abstracting/Indexing: Online Gateways: CrossRef, SwetsWise, EBSCOhost Electronic Journals Service, CNPIEC, OCLC FirstSearch, Google Scholar, J-Gate, CEPIEC


15

ENCYCLOPEDIA OF THERMAL PACKAGING THERMAL PACKAGING TOOLS A 4 VOLUME SETedited by Avram Bar-Cohen (University of Maryland, USA)

“The Encyclopedia meets head-on the challenges engineers and researchers face in this era of information abundance. By its breadth of coverage, the Encyclopedia provides a bird's eye view o f the techn iques and approaches used over the entire field of electronics thermal management. By its depth of coverage, " each volume provides the reader with a comprehensive guide to a specific subject area. This is undoubtedly a milestone publication that will serve the industry and the research community for many years to come.” Dr Wataru Nakayama

Research Consultant, ThermTech International

Key Features: Comprehensive, vertically and horizontally integrated treatment

of thermal management of electronics Each volume is authored/co-authored by luminaries and

recognized world experts in thermal management of electronics, and in specific domains of the industrial and research community

Readership: Packaging engineers, electronic product development engineers, and product managers, as well as researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.

1350pp Oct 2014978-981-4327-60-2(Set) US$1380 £911(valid till 28 Feb 2015, thereafter US$1580 / £1043)

Thermal Engineering/Packaging

WSPC Series in Advanced Integration and Packaging COOLING OFMICROELECTRONIC AND NANOELEC TRONIC EQUIPMENT: ADVANCES AND EMERGING RESEARCHedited by Madhusudan Iyengar (Facebook, USA), Karl J L Geisler (3M, USA) & Bahgat Sammakia (Binghamton University, USA)

To celebrate Professor Avi Bar-Cohen’s 65th birthday, this unique volume is a collection of recent advances and emerging research from various luminaries and experts in the field. Cutting-edge technologies and research related to thermal management and thermal packaging of micro- and nanoelectronics are covered, including enhanced heat transfer, heat sinks, liquid cooling, phase change materials, synthetic jets, computational heat transfer, electronics reliability, 3D packaging, thermoelectrics, data centers, and solid state lighting.

Readership: Researchers, practitioners, and postgraduates in mechanical engineering, nanoelectronics, computer engineering, and electrical & electronic engineering.

400pp Aug 2014978-981-4579-78-0 US$135 £89

ULTRASONIC MICRO/NANO MANIPULATIONS: PRINCIPLES AND EXAMPLESby Junhui Hu (Nanjing University of Aeronautics and Astronautics, China)

Contents: Introduction; Physics in Ultrasonic Micro/Nano Manipulations; Ultrasonic Trapping of Micro Solids; Ultrasonic Extraction, Driving and Removal of Micro Solids; Ultrasonic Manipulations of Nanoscale Entities; Ultrasonic Microfluidic Manipulations; Concluding Remarks.

Readership: Researchers, academics and graduate students in mechanical engineering, applied physics, electrical & electronic engineering, nanofabrication & nanomanipulation.

268pp Apr 2014978-981-4525-31-2 US$88 £58

General

Manuals in Biomedical Research - Vol 7A MANUAL INTRODUCING INTELLECTUAL PROPERTY TO SCIENTISTS PATENTSby Benjamin Burge (Bose Corporation, USA), Annick Töpken (Germany), Jiancheng Jiang (Peksung Intellectual Property Ltd, China), Yoshinori Shimizu (SOEI Patent & Law Firm, Japan), Christopher Frerking (Viering, Jentschura & Partner, Germany), Andreas Meyer (Viering, Jentschura & Partner, Germany),Sven Rihm (Viering, Jentschura & Partner, Germany), Ivy Lee May (Shanghai International Intellectual Property Services(SHIIPS)) & Maik Brinkmann (Viering, Jentschura & Partner, Singapore)

Contents: What Is Intellectual Property?; What Does a Patent Look Like?; Basic Terms in Patent Law; From the Invention to a Patent!; What Happens After the Grant of a Patent?; Costs of an Invention; Reward for the Inventor.

Readership: Undergraduates and graduates who want to obtain basic knowledge about patent law; small- and medium-sized businesses and scientists in all fields of technology.

350pp Jun 2015978-981-4261-79-1(pbk) US$48 £32

t S i

JournalINTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS IJSSD http://www.worldscientific.com/ijssd

Editors-in-ChiefY B Yang (National Taiwan University, Taiwan), C M Wang (National University of Singapore, Singapore) & J N Reddy (Texas A&M University, USA)

About IJSSD: Aims and Scope The aim of this journal is to provide a unique forum for the publication and rapid dissemination of original research on stability and dynamics of structures. Papers that deal with conventional land-based structures, aerospace structures, marine structures, as well as biostructures and micro- and nano-structures are considered. Papers devoted to all aspects of structural stability and dynamics (both transient and vibration response), ranging from mathematical formulations, novel methods of solutions, to experimental investigations and practical applications in civil, mechanical, aerospace, marine, bio- and nano-engineering will be published.

Abstracting/Indexing:Compendex | CSA Health and Safety Abstracts | Current Contents®/Engineering, Computing, and Technology | INSPEC | ISI Alerting Services | Mathematical Reviews | Science Citation Index Expanded | Scopus

onf P th

s s s

f

wd

s s

r

Set 2

Mech Engrg 2015 F.indd 15 7/15/14 5:01 PM


16

Bestselling BacklistTITLE PUB_DATE EDITOR ISBN13 US$ £ADSORPTION ANALYSIS: EQUILIBRIA AND KINETICS (WITH CD CONTAINING COMPUTER MATLAB PROGRAMS)

22-Sep-98 DO DUONG D 9781860941306 141 93

CHEMICAL THERMODYNAMICS FOR METALS AND MATERIALS (WITH CD-ROM FOR COMPUTER-AIDED LEARNING)

13-Oct-99 LEE HAE-GEON 9781860941771 55 36

CLASSICAL AND COMPUTATIONAL SOLID MECHANICS 29-Jun-01 FUNG Y C & TONG P 9789810241247(pbk) 74 49CREATIVITY FOR ENGINEERS 6-Feb-06 DHILLON B S 9789812565297 83 55ENGINEERING MATERIALS FOR BIOMEDICAL APPLICATIONS 21-Oct-04 TEOH SWEE HIN 9789812560612 196 129GAS SEPARATION BY ADSORPTION PROCESSES 19-Jun-97 YANG R T 9781860940477(pbk) 81 53INTRODUCTION TO BIOENGINEERING 4-May-01 FUNG Y C 9789810243982(pbk) 43 29INTRODUCTION TO MICROMECHANICS AND NANOMECHANICS 28-Jul-08 LI SHAOFAN ET AL 9789812814142(pbk) 65 43INTRODUCTION TO THE BASICS OF RELIABILITY AND RISK ANALYSIS, AN 28-Feb-07 ZIO ENRICO 9789812706393 99 65INTRODUCTORY TEXT TO BIOENGINEERING, AN 27-May-08 CHIEN SHU, CHEN

PETER C & FUNG Y C9789812707949(pbk) 61 40

MECHANICS OF SOLIDS AND STRUCTURES, THE 26-Apr-00 REES D W A 9781860942181(pbk) 92 61MODELING, SIMULATION, AND CONTROL OF FLEXIBLE MANUFACTURING SYSTEMS: A PETRI NET APPROACH

29-Jan-99 ZHOU M C ET AL 9789810230296 119 78

MOTOR VEHICLE DYNAMICS: MODELLING AND SIMULATION 19-Apr-97 GENTA GIANCARLO 9789810229115 148 98NMR PROBEHEADS FOR BIOPHYSICAL AND BIOMEDICAL EXPERIMENTS: THEORETICAL PRINCIPLES AND PRACTICAL GUIDELINES (WITH CD-ROM)

5-May-06 MISPELTER JOEL ET AL 9781860946370 166 110

NONLINEAR THEORY OF ELASTICITY: APPLICATIONS IN BIOMECHANICS 19-Feb-04 TABER LARRY A 9789812387356 166 110PRINCIPLES OF BIOSEPARATIONS ENGINEERING 23-Oct-06 GHOSH RAJA 9789812568922 83 55RAPID PROTOTYPING: PRINCIPLES AND APPLICATIONS (3RD EDITION) (WITH COMPANION CD-ROM)

14-Jan-10 CHUA CHEE KAI, LEONG KAH FAI & LIM CHU SING

9789812778987(pbk) 69 46

SCIENCE OF STRUCTURAL ENGINEERING, THE 18-Nov-99 HEYMAN J 9781860941894(pbk) 49 32SMOOTHED PARTICLE HYDRODYNAMICS: A MESHFREE PARTICLE METHOD

10-Oct-03 LIU GUI RONG & LIU M B 9789812384560 186 122

SPACECRAFT POWER TECHNOLOGIES 31-Jan-00 HYDER A K ET AL 9781860941177 129 85THEORY AND PRACTICE OF HYDRODYNAMICS AND VIBRATION, THE 5-Nov-02 CHAKRABARTI SUBRATA K 9789810249229(pbk) 52 34THERMOPHYSICAL PROPERTIES OF FLUIDS: AN INTRODUCTION TO THEIR PREDICTION

29-Jul-96 TRUSLER J P M ET AL 9781860940194(pbk) 45 29

USING ANIMAL MODELS IN BIOMEDICAL RESEARCH: A PRIMER FOR THE INVESTIGATOR

2-Jan-08 CHOW PIERCE K H, NG ROBERT T H & OGDEN BRYAN E

9789812706638 94 62

ProceedingsTITLE PUB_DATE EDITOR ISBN13 US$ £ADAPTIVE MOBILE ROBOTICS - PROCEEDINGS OF THE 15TH INTERNATIONAL CONFERENCE ON CLIMBING AND WALKING ROBOTS AND THE SUPPORT TECHNOLOGIES FOR MOBILE MACHINES

11-Jul-12 TOKHI OSMAN ET AL 9789814415941 198 131

METHODS, MODELS, SIMULATIONS AND APPROACHES TOWARDS A GENERAL THEORY OF CHANGE - PROCEEDINGS OF THE FIFTH NATIONAL CONFERENCE OF THE ITALIAN SYSTEMS SOCIETY

27-Mar-12 MINATI GIANFRANCO ET AL

9789814383332 334 220

IAENG TRANSACTIONS ON ENGINEERING TECHNOLOGIES VOL. 7 - SPECIAL EDITION OF THE INTERNATIONAL MULTICONFERENCE OF ENGINEERS AND COMPUTER SCIENTISTS 2011

27-Jan-12 AO SIO-IONG ET AL 9789814390002 165 109

FIELD ROBOTICS - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON CLIMBING AND WALKING ROBOTS AND THE SUPPORT TECHNOLOGIES FOR MOBILE MACHINES

23-Aug-11 BIDAUD PHILIPPE ET AL

9789814374279 289 191

ELECTRO-RHEOLOGICAL FLUIDS AND MAGNETO-RHEOLOGICAL SUSPENSIONS - PROCS OF THE 12TH INTERNATIONAL CONFERENCE

26-May-11 TAO RONGJIA 9789814340229 221 146

ENGINEERING PLASTICITY AND ITS APPLICATIONS - PROCEEDINGS OF THE 10TH ASIA-PACIFIC CONFERENCE

9-May-11 LI JIANJUN ET AL 9789814324045 161 106

ADVANCED TOPICS IN SCATTERING THEORY AND BIOMEDICAL ENGINEERING - PROCEEDINGS OF THE 9TH INTERNATIONAL WORKSHOP ON MATHEMATICAL METHODS IN SCATTERING THEORY AND BIOMEDICAL ENGINEERING

26-Aug-10 FOTIADIS DIMITRIOS I ET AL

9789814322027 176 116

MAGNETIC NANOPARTICLES: PARTICLE SCIENCE, IMAGING TECHNOLOGY, AND CLINICAL APPLICATIONS - PROCEEDINGS OF THE FIRST INTERNATIONAL WORKSHOP ON MAGNETIC PARTICLE IMAGING

2-Aug-10 BUZUG THORSTEN M ET AL

9789814324670 133 87

MOBILE ROBOTICS: SOLUTIONS AND CHALLENGES - PROCEEDINGS OF THE TWELFTH INTERNATIONAL CONFERENCE ON CLIMBING AND WALKING ROBOTS AND THE SUPPORT TECHNOLOGIES FOR MOBILE MACHINES

26-Aug-09 TOSUN O ET AL 9789814291262 297 196

MECHANICAL AND ELECTRONICS ENGINEERING - PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ICMEE 2009

16-Jul-09 MAHADEVAN VENKATESH ET AL

9789814289788(pbk) 128 85

ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE (WITH CD-ROM) - PROCEEDINGS OF THE 9TH AEPA2008

3-Apr-09 HUH HOON ET AL 9789814261562 255 169

NANO-BIOMEDICAL ENGINEERING 2009 - PROCEEDINGS OF THE TOHOKU UNIVERSITY GLOBAL CENTRE OF EXCELLENCE PROGRAMME

25-Feb-09 YAMAGUCHI TAKAMI 9781848163522 206 136

INTERNATIONAL ENGINEERING EDUCATION - PROCEEDINGS OF THE INAE CONFERENCE

17-Feb-09 NATARAJAN R ET AL 9789814261777 98 64

BIOMATERIALS IN ASIA: IN COMMEMORATION OF THE 1ST ASIAN BIOMATERIALS CONGRESS

15-Dec-08 TATEISHI TETSUYA 9789812835741 210 139


17


Title Index

✔ Title Page3D PRINTING AND ADDITIVE MANUFACTURING: PRINCIPLES AND APPLICATIONS

5

A MANUAL INTRODUCING INTELLECTUAL PROPERTY TO SCIENTISTS — PATENTS

15

AN INTRODUCTORY TEXT TO BIOENGINEERING 7APPLIED MECHANICS WITH SOLIDWORKS 4ARTIFICIAL INTELLIGENCE: A GUIDE TO INTELLIGENT VEHICLE

13

ASYMPTOTIC THEORY OF ANISOTROPIC PLATES AND SHELLS 4BIOENGINEERING FLUID MECHANICS 7BIOPRINTING: PRINCIPLES AND APPLICATIONS 6COMPUTATIONAL METHODS FOR TWO-PHASE FLOWS

9

COMPUTATION OF MATHEMATICAL MODELS FOR COMPLEX INDUSTRIAL PROCESSES

8

COMPUTER-AIDED ENGINEERING DESIGN WITH SOLIDWORKS 6COMPUTER MODELING USING PARTICLE METHODS 5COOLING OF MICROELECTRONIC AND NANOELECTRONIC EQUIPMENT: ADVANCES AND EMERGING RESEARCH

15

DESIGN FOR SIX SIGMA FOR ENGINEERS 10DYNAMICS OF FLOATING OFFSHORE STRUCTURES 14ENCYCLOPEDIA OF THERMAL PACKAGING THERMAL PACKAGING TOOLS (A 4 – VOLUME SET)

15

FINITE ELEMENT METHODS FOR ENGINEERS (2ND EDITION)

13

FUNDAMENTALS OF TRIBOLOGY (2ND EDITION) 12GAS HYDRATES AND FLOW ASSURANCE 8HANDBOOK OF BIOMIMETICS AND BIOINSPIRATION (IN 3 VOLUMES)

6

HANDBOOK OF MECHANICAL STABILITY IN ENGINEERING 11HIGH-SPEED PENETRATION DYNAMICS 10

INTRODUCTION TO ADIABATIC SHEAR LOCALIZATION 4INTRODUCTION TO MICROMECHANICS AND NANOMECHANICS (2ND EDITION)

12

MATERIAL AND ENERGY BALANCES FOR ENGINEERS AND ENVIRONMENTALISTS

8

MATHEMATICAL METHODS AND MODELS IN COMPOSITES 5MECHANICS OF SOLIDS AND STRUCTURES (2ND EDITION) 12METHODS IN RESEARCH AND DEVELOPMENT OF BIOMEDICAL DEVICES

7

NMR PROBEHEADS FOR BIOPHYSICAL AND BIOMEDICAL EXPERIMENTS

7

NOISE AND VIBRATION CONTROL 10NONLOCAL CONTINUUM DAMAGE AND PLASTICITY: THEORY AND COMPUTATIONS

11

PROJECT MANAGEMENT FOR ENGINEERS

13

RELIABILITY MODELING WITH APPLICATIONS 10

RESOLUTION OF THE 20TH CENTURY CONUNDRUMIN ELASTIC STABILITY

11

SMOOTHED PARTICLE HYDRODYNAMICS 9SMOOTHED POINT INTERPOLATION METHODS: G SPACE THEORY AND WEAKENED WEAK FORMS

6

STOCHASTIC SIMULATION OPTIMIZATION FOR DISCRETE EVENT SYSTEMS

10

STRAIN AND DISLOCATION GRADIENTS FROM DIFFRACTION 14STRUCTURAL INTEGRITY CONSIDERATIONS IN ENGINEERING DESIGN

14

THE MECHANICS OF ENGINEERING STRUCTURES 12THE RESILIENCE OF NETWORKED INFRASTRUCTURE SYSTEMS: ANALYSIS AND MEASUREMENT

10

ULTRASONIC MICRO/NANO MANIPULATIONS: PRINCIPLES AND EXAMPLES

15

Author IndexAuthor Page Author Page Author Page Author Page

AAbu Al-rub Rashid K ................. 11Aghalovyan Lenser A ..................4Agonafer Dereje .......................15

BBai Yilong....................................4Barabash Rozaliya I ................. 11Bar-cohen Avram ......................15Ben-dor Gabi ............................10Bennett J Michael .....................13Briguet Andre ..............................6Brinkmann Maik ........................15Burge Benjamin D ....................15

CChakrabarti Subrata Kumar ......14Chakrabarti Sumita ...................14Chen Chun-hung ......................10Chen Hui...................................13Chen Mingchih..........................10Chen Peter C Y ..........................7Chien Shu ...................................7Chua Chee Kai ...........................5Chua Chee Kai ...........................6

DDing Hang...................................9Dissanayake Don Wenura ..........7Dodd Bradley ..............................4Dubinsky Anatoly ......................10

EElishakoff Isaac E ..................... 11Elperin Tov ................................10

FFenner Roger T ........................13

Frerking Christopher .................15Fung Yuen-cheng .......................7

GGeisler Karl ...............................15Ghaemmaghami Amir .................6Gohar Ramsey .........................12

HHo Danny Siu Kau ....................13Hoeppner David W ...................14Hu Junhui .................................15Hu Matthew ..............................10Hu Zhen-cheng .........................13Hung Tin-kan ..............................6

IIce Gene ................................... 11Iyengar Madhusudan ................15

JJabbari Esmaiel ..........................6Jankowski Nicholas ..................15Jia Qing-shan ...........................10Jiang Jiancheng........................15Joshi Yogendra .........................15

KKayupov Malik ..........................10Khademhosseini Ali ....................6Kim Deok-ho ...............................6

LLasance Clemens .....................15Lee Loo Hay .............................10Lee Luke P .................................6Lee Wen Ho ................................9Leong Kah Fai ............................5

Li Shaofan ................................12Liu Gui-rong ................................9Liu Moubin ..................................5Lupu Mihaela ..............................6

MMantic Vladislav..........................5May Ivy Lee ..............................15Mccluskey F Patrick ..................15Meyer Andreas .........................15Mispelter Joel .............................6Munjal M L ................................10

NNakamura Syouji ......................10

OOloman Colin William .................8Omer Mayada ...........................10Onwubolu Godfrey C ..................4Onwubolu Godfrey C ..................6

PPerelmuter Anatoly V ................14

QQian Cun Hua ...........................10

RRahnejat Homer .......................12Rees David W A........................12Rihm Sven ................................15

SSabry Mohammed-nabil ...........15Samadiani Emad ......................15Sammakia Bahgat G ................15Sapatnekar Sachin ...................15

Setlak Stanley J ........................15Shaw Stephen J .........................9Sheh Michael ............................10Shimizu Yoshinori .....................15Slivker Vladimir I .......................14Spelt Peter D M ..........................9Srivastava Ankur.......................15Sun Zhong-hua ...........................7

TTade Moses Oludayo ..................8Tian Yuchu ..................................8Tohidi Bahman ............................8Topken Annick ..........................15Tu Jiyuan ....................................7

WWang Gang ..............................12Wong Kelvin Kian Loong ............7

XXie Ming....................................13

YYang Kai ...................................10Yao Hongmei ..............................8Yeong Wai Yee ...........................6

ZZhang Gui-yong ..........................6Zhang Tonghua ...........................8Zhang Yufu ...............................15

✔ Title Page

Tick the titles and email to [email protected] to recommend to your librarian.


18

ORDER FORM

Title & Name

Organization

Address

City/State/Zip

Email

Tel Signature• Special Prices are available to developing countries and some Eastern European countries. Please write in for further details.• Prices subject to change without prior notice. Shipping and handling charges will be added.

• For cheque payment in USA, please make cheque payable to “World Scienti c Publishing Co. Inc.”• For cheque payment in Europe and the Middle East, please make cheque payable to “Marston Book Services”• For cheque payment from the rest of the world, please make cheque payable to “World Scienti c Publishing Co. Pte. Ltd.”

• For delivery charges and duration, please contact any of our of ces.• For US customers, delivery will be via UPS (1-2 weeks)

TITLE(S) ISBN PRICE (US$/£)QTY

TITLE SELECTION

MODE OF DELIVERY

METHOD OF PAYMENT

CONTACT INFORMATION

Printed in May 2013 New Jersey • London • Singapore • Beijing • Shanghai • Tianjin • Hong Kong • Taipei • Chennai AC/JO/06/14/01/C

Country

Please complete the form and send it to any of our offi ces below or order online @ www.worldscientifi c.com.

Alternatively, you can send your order directly to your regular book supplier.

(please attach purchase order)

Card No: CVV:

Exp. Date:

ASIA & THE REST OF THE WORLDWorld Scienti c Publishing Co. Pte. Ltd. 5 Toh Tuck Link, SINGAPORE 596224 Fax: 65 646 7667 Tel: 65 6466 5775 Email: [email protected]

NORTH & SOUTH AMERICAWorld Scienti c Publishing Co. Inc. 27 Warren Street, Suite 401-402Hackensack, NJ 07601, USA Fax: 1 201 487 9656Tel: 1 201 487 9655 Email: [email protected]

EUROPE & THE MIDDLE EASTWorld Scienti c Publishing (UK) Ltd. c/o Marston Book ServicesPO Box 269, Abingdon, Oxon OX14 4YN, UKFax: 44 (0) 123 546 5555Tel: 44 (0) 123 546 5500Email: [email protected]

/

Encyclopedia of Thermal Packaging

Set 2: Thermal Packaging Tools (A 4-Volume Set)Set 1: Thermal Packaging Techniques (A 6-Volume Set)

1580pp (Set 1) Dec 2012 978-981-4313-78-0 US$1580 £1043978-981-4313-79-7(ebook) US$2054 £1356

http://www.worldscientific.com/worldscibooks/10.1142/7819 http://www.worldscientific.com/worldscibooks/10.1142/7969

Scan this code with your smartphone to go to our book’s webpage

Scan this code with your smartphone to go to our book’s webpage

IntroductoryOffer

US$1,380 / £911(set 2)

Introductory Offer till 31st Dec 2014

Printed in June 2014 New Jersey • London • Singapore • Beijing • Shanghai • Tianjin • Hong Kong • Taipei • Chennai AC/JO/06/14/01/E

1580pp (Set 2) Aug 2014978-981-4327-60-2 US$1580 £1043 US$1380 £911

978-981-4327-66-4(ebook) US$2054 £1356


World Scientific

JournalsOver 120 titles

Covering 11 diverse subject areas Chemistry Computer Science Economics, Finance & Management Engineering Environmental Science Materials Science Mathematics Medical and Life Sciences Nonlinear Science Physics Social Sciences

Register on worldscientific.com today Register on worldscientific.com today and check out the free contents available exclusively for registered users!

Discover the most

fl exible e-book offer

on the market

❯❯ Over 2,000,000 pages of content ❯❯ More than 300 titles added yearly ❯❯ 11 diverse subject packages

World Scientific

E-Bookswww.worldscientific.com

Main Features Perpetual access model

No minimum purchase required

DRM-free content

24 x 7 access for unlimited concurrent users

Over 4000 titles available Full support for mobile devices*

* With internet connection and Adobe acrobat

In addition, you will enjoy Fully integrated platform to search across e-journals,

e-archives and e-books

MARC records for easy integration to your OPAC

Full usage statisticsNo hosting fees

Discover thek offer❯❯ Over 2,000,000 pages of over the most

ff r❯❯ Over 2 000 000 pages of

C o n n e c t i n g G r e a t M i n d s

www.worldscientif ic.com

How to OrderFor more information, to request a quote or to request an institutional trial, please contact your regular supplier, or one of our local offices:

ASIA PACIFIC: [email protected]

NORTH, SOUTH AND CENTRAL AMERICA: [email protected]

EUROPE, MIDDLE EAST AND AFRICA: [email protected]

Pick and Choose Build a customized collection

Subject Collections Choose from 11 diverse subjects

Full Collections Select from a deep back-list, or pre-order the front-list collection


WORLD SCIENTIFIC JOURNALS AT www.worldscientific.com/page/worldscinet

page 8

page 4

page 9

page 5

page 11 page 12

page 13 page 13 page 14 page 15

World Scientifi c

Imperial College PressICP• UK Imperial College Press, 57 Shelton Street, Covent Garden, London WC2H 9HE, UK. Fax: +44 020 7836 2020 Tel: +44 020 7836 0888 Email: [email protected]

www.worldscientific.com

www.icpress.co.uk

• NEW JERSEY World Scientifi c Publishing Co. Inc., 27 Warren Street, Suite 401-402, Hackensack, NJ 07601, USA. Fax: +1-201-487-9656 Tel: +1-201-487-9655 Email: [email protected]

• LONDON World Scientifi c Publishing (UK) Ltd., 57 Shelton Street, Covent Garden, London WC2H 9HE, UK. Fax: +44 020 7836 2020 Tel: +44 020 7836 0888 Email: [email protected]

• SINGAPORE World Scientifi c Publishing Co., Pte. Ltd., 5 Toh Tuck Link, SINGAPORE 596224 Tel: +65 6466 5775 Fax: +65 6467 7667 Email: [email protected]

• BEIJING World Scientifi c Publishing (Beijing), School of Mathematical Sciences, Building #2526W, Peking University, Beijing 100871, P R OF CHINA

Tel/Fax: +86 10 6275 9359 Email: [email protected]

• TIANJIN World Scientifi c Publishing (Tianjin), Room 309, Chern Institute of Mathematics, Nankai University, Weijin Road 94, Nankai District, Tianjin 300071, P R OF CHINA

Tel: +86 22 2350 9343 Email: [email protected]

• SHANGHAI Global Consultancy (Shanghai) Pte. Ltd., Shanghai Bund International Tower, No. 99, Huangpu Road, Room 2003, Shanghai 200080, P R OF CHINA

Fax: +86 21 6325 4985 Tel: +86 21 6325 4982 Email: shanghai@worldscientifi c.com.cn

• HONG KONG World Scientifi c Publishing (HK) Co. Ltd., P O Box 72482, Kowloon Central Post Offi ce, Hong Kong. Fax: +852 2 771 8155 Tel: +852 2 771 8791

Email: [email protected]

• TAIWAN World Scientifi c Publishing Co. Pte. Ltd., 8F, No.162, Sec 4, Roosevelt Road, Taipei 10091, TAIWAN (ROC) Fax: +886 2 2366 0460 Tel: +886 2 2369 1366 Email: [email protected]

• INDIA World Scientifi c Publishing Co. Pte. Ltd., No. 16 South West Boag Road, T. Nagar, Chennai 600017, INDIA Tel / Fax: 91-44-52065464 Email: [email protected]

• ISRAEL World Scientifi c Publishing Co., Kiriat Hatikshoret-Neve Ilan, Suite 226-Harei Yehuda, 90805, ISRAEL Tel: 972-54-4403728 Tel/Fax: 972-25791532/3 Email: [email protected]


Documents

Ws mechanical catalogue2015