Workshop,Seminar Even Sem

SETHU INSTITUTE OF TECHNOLOGYPulloor,Kariapatti

DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING

COMPETENCY CHART OF FACULTY FOR THE YEAR 2012 – 2013 (Even SEMESTER)

S. No.

Name & Designation

Subject Handled & Performance

Specialization Training / refresher courses attended Paper PresentedSubject % of

Pass

1.Dr.K.Hemalatha,Prof.& Head

EI 72 - Logic and Distributed Control

System95.16

Biomedical Instrumentation

Winter school: “Design and Development of Embedded

Systems” at Karunya College of Engineering, Coimbatore

“Medical Imaging and Computer Tomography” held at Indian Institute of Science, BangaloreSeminar

“Modern Trends in Control Engineering” held at Sethu Institute of Technology, Kariapatti, 17.02.05 to 18.02.05

“Salient Aspects of New Accreditation Systems” held at Sethu Institute of Technology, Kariapatti, 04.02.05 to 04.02.2012

“MEMS and Nanotechnology” held at Sethu Institute of Technology, Kariapatti, 09.03.2012 to 10.03.2012FDP

“Recent Advances in Robots & Robot Programming” held at Sethu Institute Of Technology,11.03.2013 to 23.03.2013

International Journals1. K.Hemalatha, L.Suganthi,

M.Manivannan, Hybrid cardiopulmonary model for analysis of valsalva maneuver with radial artery pulse, Annals of Biomedical Engineering, Volume 38, Number 10 / October 2010, pp 3151-3161.

2. K. Hemalatha and M. Manivannan, A study of Cardiopulmonary interaction haemodynamics with detailed lumped parameter model, International Journal of Biomedical Engineering and Technology 2011 - Vol. 6, No.3 pp. 251 – 271

3. K. Hemalatha and M. Manivannan, Cardiopulmonary model to study interaction hemodynamics in mueller maneuver, Under review in International Journal for Numerical Methods in Biomedical Engineering, DOI: 10.1002/cnm.1437, 2011).

4. K. Hemalatha and M. Manivannan, Non-invasive radial artery pulse analysis for the evaluation of mitral stenosis- Model and Experiment study, Under review in Journal of Mathematical Modelling and Algorithms (Springer).

International Conferences1. K. Hemalatha, M. Manivannan, Valsalva

Maneuver for the analysis of interaction hemodynamic–Model study, Int. Conf on Recent Trends in Information,

EI 42 Transducer Engineering

96.87

EI 72-Logic and Distributed Control

System

89.09

Estd.1995

Telecommunication and Computing, IEEE 2010, India,28-32, (Won Best Paper Award).

2. K. Hemalatha, M. Manivannan, A study of Respiratory Induced Variations of Breath Patterns on Cardiopulmonary System Dynamics, Int. Conf on Challenges and Applications of Mathematics in Science and Technology CAMIST-2010, India, 751-759.

3. K. Hemalatha, M. Manivannan, A detailed cardiopulmonary model for the study of interaction hemodynamics, Int. Conf. on Recent Advancements in Electrical Sciences ICRAES 10, India, 320-332.

4. K. Hemalatha, M. Manivannan, S. Thanikachalam, Numerical simulation of cardiac valves flow velocity patterns in normal and abnormal conditions, Int. Conf. on computer, control and communication technologies, IEEE ICCCT 2010, India, 98-101.

5 .Dr. K. Hemalatha presented a Paper on “Industrial automation through internet and smart phones using open source software and hardware” in an International Conference ICCI 2013 conducted by on 25th and 26th April 2013

2.

Mr.K.Jalal DeenAsst.Prof(Sr.)

EE1251 – Electric Circuit Analsis 72.53


Workshop “Graphical system design using NI LAB

view” held at Sethu insitute of technology, 22,23.01.2009

“MULTISIM” held at Sethu institute of technology, 27,28.01.2009

“Application of soft computing techniques to electrical engineering” held at Bannariamman institute of technology, 11,12.10.2011Seminar

“Recent trends in knowledge engineering and machine intelligence” held at Sethu institute of technology, 03,04.08.2009

Conferences Design and testing based on low power wireless

transceiver using BIST on 16 Aprl NCMOC 2009 at ACCE Tech , Karaikudi.

Low power wireless transceiver using BIST in national technical seminar at KLN college of Engg. On 31st March 2010 & 1st April 2010.

“Automatic detection and testing based RF wireless transceiver SOC’S using DISC” in a national conference NCCCTS-13 conducted by Muthayammal College of Engineering on 5 & 6/04/13 .

EI1253 – Electronic

Instrumentation

83.60

EI 34 – Electrical measurements

81.25

EI1351 – 71.4


“Futuristic approach in nano technology for electronics engineering” held at Sethu insitute of technology, 08,09.10.2010

“Research issues in VLSI Design” held at Sethu institute of technology, 18.11.2011

“Research issues in bio image processing” held at K.L.N college of engineering, 24,25.02.2012

“Recent trends in MEMs & nano technology” held at Sethu institute of technology, 09,10.03.2012

“Recent trends in optical communication and network” held at Sethu institute of technology,

GE1301 – Professional Ethics and human values

95.24

EI1002 -Power Plant 96.77EI 701 - Power

EI 42 Transducer 96.82EI701-Power Plant

Instrumentation87.2

3.Mr.S.RajkumarAsst.Prof(Sr.)

EC65- Digital Signal Processing

81 MIMO - OFDM Workshop “Digital Signal Processor and Applications”

held at ............ ”Labview Software and its Applications” held

at Periyar Maniammai University Thanjavur, 14.03.2008

“Course Writers of Self Learning Materials” held at Periyar Maniammai University , Thanjavur-21.05.2008

“Signal Processing” held at Thiagarajar College of Engineering, Madurai on 31.1.2009

“DSP Practice using Texas TMS320C54/C55X Processor” held at Sethu institute of technology, 10.06.2009 to 12.06.2009

“MIMO Technology in IEEE 802.11n Standard” AU-KBC Research Centre, Chennai-44,19.06.2009

“MIMO Wireless Communications” held at Thiagarajar College of Engineering, Madurai-05.08.2009 to 08.08.2009

“Team Building” held at Sethu institute of technology, 17.08.2009

“Research issues in wireless communications” held at SAMEER centre- Chennai, 14.12.2009

“Wireless Network Simulator” held at Sethu institute of technology, 19.08.2011

“MIMO Wireless Communications” held at

Conferences “Performance analysis of MIMO in wimax

systems” national conference at RMD Engineering college, chennai, 19.04.2007

“Algorithms used for cryptosystems” national conference at Kings college of engineering Tanjur, 06,07.03.2008

“Performance analysis of OFDM and multiband OFDM in multipath fading channels” national conference at Anna university chennai, 08,09.05.2008

“An enhanced closed loop MIMO design for wimax” national conference at Thiagarajar college of engineering, 23,24.07.2010

Mr.S.Rajkumar and Mr.Ajith B Singh presented a paper on “Fuzzy Controller implementation for an Industrial Deaerator system” In a national conference NCIT-13 conducted by Bannari Amman Institute of Technology on 14th March 2013

EI55 Communication

Engineering

77.41

Thiagarajar College of Engineering, Madurai 24.08.2011 to 27.08.2011

“Sparse Theory & Applications to signal and Image Processing” held at Kongu Engineering College from 02-05-2013 to 08-05-2013

Seminar “Recent trends in MEMS & Nano technology”

held at Sethu institute of technology, 09,10.03.2012

National Seminar on Recent Advances in Electronics and instrumentation for Oncological Detection held at Sethu institute of technology, 28.11.2012

FDP “Computer networks” held at SSN college of

engineering chennai, 28.05.2007 to 09.06.2008

“wireless degital communication -theory& practice” held at Indian institute of technology, Madras, 05.05.2008 to 10.05.2008

“Faculty induction Programme” held at Sethu institute of technology, 18,19.06.2009.

4.

Mr.N.Kins Burk SunilAsst.Prof(Sr.)

EE33 – Electrical Machines

81.64Biomedical

Instrumentation Workshop

“Industrial Automation using embedded system” held at Francis xavier engineering college, Tirunelveli, 28.09.2007

“MATLAB” held at PSN college of engineering & Tech.,, 01,02.02.2008

“Electromagnetics and antennas” held at PSN college of engineering & Tech.,14,15.03.2008

“Industrial Automation” held at Sethu institute of technology,21 to 24.03.2011

“Application of soft computing techniques to electrical engineering” held at Bannariamman institute of technology, 11,12.10.2011

STT

Conferences “Data Compaction and BIST in VLSI Circuits”

on National conference NATCON’06 at Noorul Islam College of Engineering, Kumaracoil on 8th & 9th March 2006.

EI 61 Modern Electronic

Instrumentation 98.39

EE 44 Control Systems

81.81

EI33 Electrical machines

81.25

EI33 Electrical machines

90.48

EE44 Control Systems

87.30

EI 2201 -Electrical Machines

76.78 “Sparse Theory & Applications to signal and Image Processing” held at Kongu Engineering College from 02-05-2013 to 08-05-2013

Winter school: “DSP & communication engineering” held at

PSN college of engineering, 24-29.11.2008

Seminar “Recent Advances in wireless sensor networks”

held at Sethu institute of technology, 10,11.02.2012

“Research issues in bio image processing” held at K.L.N. college of engineering, 24,25.02.2012

“Recent trends in MEMS & Nano technology,” held at Sethu institute of technology, 09,10.03.2012

“Recent trends in wireless sensor networks” held at Sethu institute of technology, 26,27.03.2012

Advances in Gamma spectrometer using photomultipliers held on Kalasalingam University on 18.9.2012


Fuzzy Optimization for image Processing Control system applications held at Sethu institute of technology, 03.12.2012

National Seminar on Challenges in remote sensing and GIS held at sethu institute of technology,25-3-2013 ,26-3-2013FDP

“Faculty induction programme” held at Sethu institute of technology, 29 to 31.07.2010

“Instrumentation & Automation” held at Sethu institute of technology, 05.05.2011

“How to start research programme” held at

Sethu institute of technology, 24.06.2011 “Research issues in VLSI design” held at

Sethu institute of technology, 18.11.2011 “Recent Advances in Robots & Robot

Programming” held at Sethu Institute Of Technology,11.03.2013 to 23.03.2013

5. Ms.G.LakshmiAsst.Prof

EC1361- Digital Signal Processing

95

Medical Electronics

Workshop “Bio medical and science and technology” held

at Anna university chennai 02- 04.03.2011 “Industrial automation” held at Sethu institute

of technology, 21 to 24.03.2011Seminar

“How to Start Research Program” held at Sethu Institute of Technology, 24.06.2011

“Salient aspects of new accreditation system washington accord” held at Sethu institute of technology, 03,04.02.2012

“Recent trends in MEMS & Nano technology” held at Sethu insititute of technology, 09,10.03.2012


National Seminar on Challenges in remote sensing and GIS held at sethu institute of technology,25-3-2013 ,26-3-2013

FDP “Industrial automation using PLC SCADA”

held at Sethu institute of technology, 29,30.12.2009`


“Process Control” held at Kumara guru college of Technology,04,05.11.2011

Conference

“MEDSTAN – An Information System for Medical Strandards” on national conference at Gandhi College of Engineering ,21 &22-03-2008.

EI 53 – Industrial Instrumentation

II

86.88

GE32- Environmental

Science and Engg.

89.09

EI 65 Biomedical Instrumentation

88.52

EI 41 Industrial Instrumentation - I

86.79

EI53 - Industrial Instrumentation –

II

98.18

CS 61 - Artificial Intelligence

80.00

EE603- Robotics and Automation

95.08

GE 2211 – Environmental

Science and Engineering

67.85

6. Mr.M.LakshmananAsst.Prof

EI51 – Industrial Electronics

80.95

Control & Instrumentation

Workshop “Applications of soft computing techniques to

electrical engineering” held at Bannari amman insitute of technology, Sathiyamangalam, 11,12.10.2011.

“Control system design using LABVIEW” held at K.L.N.College of engineering, Pottapalayam. 03,04.04.2012Seminar

“Renewable energy -environmental design solutions” held at Saranathan college of engineering, Trichy 28,29.01.2011

“Recent trends in MEMs & Nano technology” held at Sethu institute of technology-09,10.03.2012



FDP “Instrumentation & Automation” held at

Sethu institute of technology, 05.05.2011

Conferences “Design of controllers for DMBB System” on

National conference INCOS’10 at Kalasalingam University, Krishnankovil

EI1004 – Virtual Instrumentation

82

EE 44 - Control Systems

81.48

EI 71 - Industrial Data Networks 77.41EI61- Modern

Electronic Instrumentation

89.09

EI71-Industrial Data Networks

87

7. Mr.V.Bala SundaramAsst.Prof

EC25 - Electric Circuits and

Electron Devices 78.6

Instrumentation

Workshop “Industrial automation” held at Sethu institute

of technology, 21 to 24.03.2011 “Real time Simulation using LABVIEW in

Process Control” held at Sethu Institute of Technology, 20,21.01.2012Seminar

“Recent trends in MEMS & Nano technology” held at Sethu insititute of technology, 09,10.03.2012FDP


“How to start research programme” held at Sethu institute of technology, 24.06.2011

Conferences “Reconfigurable Controller Design for

Continuous Stirred Tank Reactor (CSTR)” in Bangkok-2009 International Conference on Control, Automation, Robotics and Vision.

GE32 Environmental

science and engineering

80.95

CS34-Digital Principles and

Systems Design

90.0

GE71- Total Quality

Management

100

EI 2201 -Electrical

Machines 80.7

8. Mr.V.DhayanithiAsst.Prof

GE32 Environmental

science and engineering

78.13

Instrumentation

Workshop “Industrial automation” held at Sethu institute

of technology, 21 to 24.03.2011Seminar

“Recent trends in MEMS & Nano technology” at Sethu institute of technology, 09,10.03.2012FDP

“Research issues in process control” held at K.L.N. College of engineering, Pottapalayam, 20,21.04.2011


“Faculty induction programme” held at Sethu insitute of technology, 07,08,14,15,16.06.2011


Conferences “Medical Image fusion by combining curvelet

& Wavelet Transform” on National Conference MCSCV’09 at Anna university Coimbatore at 8th & 9th May 2009.

GE606 Professional Ethics

in Engineering

100

GE 2211 – Environmental

Science and Engineering

71.9

9. Mr.Ajith B.SinghAsst.Prof

EI55 - Communication

Engineering94.55


Workshop “Real time Simulation using LABVIEW in

Process Control” held at Sethu Institute of Technology, 20,21.01.2012

“Technical training program on DCS and PLC overview” held at Sethu Institute of Technology ,conducted by YOKOGAWA ,17.9.2012 to 21.9.2012

Seminar “How to Start Research Program” held at

Sethu Institute of Technology, 24.06.2011 “Recent trends in MEMs & Nano technology”

held at Sethu Institute of Technology, 09,10.03.2012FDP


Publications International Journal of Emerging Trends in

Engineering and Development, Issue 1, Volume 3 page no: 316-324, 30.11.2011Conferences

“PH Neutralisation using Fozzy Logic Controller” national conference at Bannari amman Institute of Technology, 05, 06.03.2010 (NCIT-10)

“Idetification & Model based control implementation for a Hybrid Tank system” national conference at Kalasalingam University, 09.07.2011 (NCICCA-11)

“Model Predictive controller for Interthermal Process” International conference at Kalasalingam University, 24, 25, 26.03.2011 (ICONTEE 2011)

“System Identification and Prediction control implementation for a ACSTR system” International conference at Kalasalingam University, 24, 25, 26.03.2011 (ICONTEE 2011)

“System Identification and Performanceanalysis

IC36- Principles of Communication

84.0

EI53 Industrial Instrumentation –

II

95.23

“Process Control” held at Kumaraguru college of Engineering, 04,05.11.2011

“Faculty Induction Program” held at Sethu institute of technology, 14,15,16.07.2011

using PID and Adaptive control for aHybrid tank system” International conference at GMR Institute of Technology, 07,08,09.04.2011, (MIPSCCON-2011)

“System Identification & Performance analysis using IMC & Adaptive control for a Hybrid tank system” International conference at SUN college of Engg & Technology, 24, 25.03.2011 (SUNIIST-2011)

“Implementation and Adaptive & Internal model controller for Interactive Heat Exchanger Process” International conference at IIMT, Bhubhaneshwar, 09, 10.04.2011 (ICAISC-2011)

“Performance analysis of Neural network& Anfis in brainMrimage classification” International conference at IIMT, Bhubhaneshwar, 09, 10.04.2011 (ICAISC-2011)

“Model Identification & Adaptive control Implementation for aCSTH Tank system” International conference at MEPCO SCHLENK engineering college, (ICONRAEECE-2011)

“Model Identification & Fuzzy controller Implementation for Evaporator process in sugar industry” International conference at IIMT Trivendrum, 12, 13.05.2012 (ICEECS-2012)

“Adaptive Controller Implementation for a stirrer tank reactor process ” In a national conference NCIT-13 conducted by Bannari Amman Institute of Technology on 14th March 2013

“Fuzzy Controller implementation for an Industrial Deaerator system” In a national conference NCIT-13 conducted by Bannari Amman Institute of Technology on 14th March 2013

10. Mrs.H.Lakshmi PriyaAsst.Prof

IC36- Principles of Communication

94.1


Seminar “MATLAB & Simulink for Engineering

Education” held at Gateway Hotel, Madurai “Recent trends in MEMS & Nano technology”

held at Sethu insititute of technology, 09,10.03.2012



FDP “Faculty induction programme” held at Sethu

institute of technology, 29 to 31.07.2010

Conferences “Segmentation of Articular cartilage from MRI

using combined wavelets and watershed algorithm” on International Conference TIMA – 2011, Chennai, 7-9 Jan 2011

EI63 Digital system Design

75

EE64 Microprocessor

and Microcontroller

64.51

11. Mr.M.S.ManikandanAsst.Prof

EI35 Electronic devices and

Circuits

84.13


Seminar “Recent trends in MEMS & Nano technology”

held at Sethu insititute of technology, 09,10.03.2012Conferences

“Adaptive fault tolerant tracking control against actuatior faults with the application to flight control” national conference at Anna university , chennai, 16.03.2011FDP


“Recent Advances in Robots & Robot Programming” held at Sethu Institute Of Technology,11.03.2013 to 23.03.2013

Conferences “Adaptive fault Tolerant tracking control

against Actuators faults with application to Flight control” in the national conference on ‘Emerging Trends in Power Electronics and power system’ on 16 March 2011 at KLN College of Information Technology.

EI51 Industrial Electronics

85.71

12. Mr.M.E.HarikumarAsst.Prof

CS34-Digital Principles and

Systems Design

86.27 Computer and Communication

Workshop “Embedded systems” held at Kamaraj college

of engineering, 02.09.2005 “Technical training program on DCS and PLC

overview” held at Sethu Institute of Technology ,conducted by

Conferences “Cryptographic encryption and encoding of

speech signal” on National Conference at Arulmigu Kalasalingam College of Engineering.

CS608-Computer Architecture

97.6

YOKOGAWA ,17.9.2012 to 21.9.2012Seminar

“Research issues in VLSI design” held at Sethu institute of technology, 18.11.2011

“Salient Aspects of New Accreditation Systems” held at Sethu institute of technology,03,04.02.2012

“Recent trends in MEMS & Nano technology” held at Sethu institute of technology,09,10.03.2012FDP

“Teaching skill and quality education -TEQ'09” held at P.S.R. Engineering College, Sivakasi,18 to 20.06.2009


EE44 Control Systems

85.93

CS608-Computer Architecture

92.72

13. Ms.B.Anusuya BagirathiAsst.Prof

EI74-Fibre Optics and Laser

Instruments

96

Process control instrumentation

Seminar “Recent Advances in Electronics and

instrumentation for Oncological Detection”, held at sethu institute of technology,28.11.2012 to 29.11.2012

EI52 Analytical Instruments

93.55

14. Ms.R.SubhaAsst.Prof

EI 2203– Electronic Devices

and Circuits

85.71




National Seminar on “Challenges in remote sensing and GIS “held at sethu institute of technology,25-3-2013 ,26-3-2013

15. Mrs.S.MeenakshiAsst.Prof

EI 72-Logic and Distributed Control

System

90 Control & Instrumentation

Workshop “Process Automation using DCS” held at

PSG college of Technology, Coimbatore on 06.7.2012 to 07.7.2012



Conferences System Identification of CSTR using

LabVIEW with PID controller tunning at sengunthar Engineering college on 4-4-2011

“ Identification and controller tuning for continuous stirred tank reactor using Virtual instrumentation “at Kamaraj college and technology on 17-3-2012

EI 2202– Electrical Measurements

82.5

16. Mrs.V.Vijaya GeethaAsst.Prof

EI71-Industrial Data Networks

94.5


Seminar“Recent Advances in Electronics and instrumentation for Oncological Detection”, held at sethu institute of technology,28.11.2012 to 29.11.2012

Conferences

“Design of a H ∞ Loop shaping controller for non linear system” Paper Presented in National Conference on Instrumentation Measurement Automation& Control(10th April 2012)

Multi –Objective Evolutionary Algorithm for Design of Robust Pid Controller” Paper Presented in the National Conference on Intelligent Computing in Communication and Automation.(5th April 2012)

EI 2203– Electronic Devices

and Circuits

87.7

17.Mr.A.Shakil Ahmed Asst.Prof

EI 73-VLSI Design

85

Communication Engineering

Seminar Fuzzy Optimization for image Processing

Control system applications held at Sethu institute of technology, 03.12.2012

FDP “Recent Advances in Robots & Robot

Programming” held at Sethu Institute Of Technology,11.03.2013 to 23.03.2013

Conferences “Rotary Hullers”at TCE,Madurai on 27-3-

2007“Intrusion detection in wireless sensor networks “ at MPNMJ,Erode on 10-4-2010

Intrusion Detection in Heterogonous wireless sensor networks with an energy efficient localization algorithms Paper presented in the International conference on “Recent Trends in Information Technology”( 19&21 April, 2012)

EI51 Industrial Electronics

75.40

18. Ms.K.NivethithaAsst.Prof

EI 73-VLSI Design 81.81

Communication Engineering




National Seminar on “Challenges in remote sensing and GIS “held at sethu institute of

Conferences International conference on Devices, Circuits

and Systems (ICDCS’12 held on Karunya University on 15-3-2012 to 16-3-2012CS608-Computer

Architecture90

technology,25-3-2013 ,26-3-2013

19. Mr.R.VinothAsst.Prof

EI701-Power Plant Instrumentation

78

Industrial Engineering

Seminar Fuzzy Optimization for image Processing

Control system applications held at Sethu institute of technology, 03.12.2012

EI52 Analytical Instruments

88.88

20. Ms.P.AhalyaAsst.Prof

EI53 Industrial Instrumentation –

II

100




National Seminar on “Challenges in remote sensing and GIS “held at sethu institute of technology,25-3-2013 ,26-3-2013

Conferences “Navigation of A Mobile Robot using Optic

Flow” Paper Presented in the National conference on “Intelligent computing in communication and Automation”(5th April2012).

Vision Based Navigation a Mobile Robot using image processing” paper presented in the International conference on “Emerging Trends in computer and communication Technologies” (16&17th February 2012)

Optical Flow Based Navigation of a Mobile Robot with Fuzzy Logic controller” Paper presented in the National conference on “ Computer Science and Informatics”(23&24th April 2012).

21. Mr.A.Abdul RahmanAsst.Prof(Jr.)

EI 43 Digital logic Circuits

83.63 VLSI Design Workshop “VLSI Design” held at Thiagarajar college of

engineering,28.02.2009 “Solid state device modelling” held at Sethu

institute of technology,11,12,13.12.2010 “solid state device modelling and simulation”

held at Thiagarajar college of engineering,04,05,2011Seminar

“Recent advances in wireless sensor networks” held at Sethu institute of technology,15,16.05.2008

EI 64 Embedded System

93.55

EE64 - Microprocessor

and Microcontroller

94.54

EI 43 Digital logic Circuits

59.37

EE64 Microprocessor

65.07

and Microcontroller

“Recent advances in nanoferrite materials for microstrip antenna” held at Sethu institute of technology 21,22.01.2009

“Recent trends in MEMS & Nano technology” held at Sethu institute of technology,09,10.03.2012FDP

“Instructnal design and delivery system” held at Sethu institute of technology,03 to 08.11.2008

“Instrumentation & Automation” held at Sethu institute of technology,05.05.2011

22. Mr.M.Sheik MohamedAsst.Prof(Jr.)

CS1206 - Electronic Circuits & Digital systems

87.5 VLSI Design Workshop “MULTISIM” held at Sethu institute of

technology, 27,28.01.2009 “Recent trends in embedded system design

8051 & ARM processor” held at K.L.N. College of engineering, 26,27.03.2010

“Solid state device modelling” held at Sethu institute of technology, 11,12,13.12.2010

“Solid state device modelling and simulation” held at Thiagarajar college of engineering, 04,05.11.2011

STT

“Sparse Theory & Applications to signal and Image Processing” held at Kongu Engineering College from 02-05-2013 to 08-05-2013Seminar

“Research induction programme” held at Sethu institute of technology, 21.10.2008

“Recent trends in knowledge engineering & Machine intelligence” held at Sethu institute of technology, 03,04.08.2009

“Recent trends in MEMS & Nano technology” held at Sethu institute of technology, 09,10.03.2012FDP

“Instructional design & delivery system” held at Sethu institute of technology, 03.11.2008 to 08.11.2008

Conferences “VLSI based FFT processor with

improvement in computation speed and area reduction” in a national conference NCCCTS-13 conducted by Muthayammal College of Engineering on 5 & 6/04/13

EC1313 – Linear Integrated Circuits

80.33

EC1362 –Microprocessor

and Microcontroller

96

EE45 – Linear Integrated Circuits and Applications

73

EE64 –Microprocessor

and Microcontroller

74.6

EE 45 Linear Integrated Circuits and Applications

78.7

EE64 - Microprocessor

and Microcontroller

92.59

EE45 Linear 78

Integrated Circuits and Applications



“Recent Advances in Robots & Robot Programming” held at Sethu Institute Of Technology,11.03.2013 to 23.03.2013EI74-Fibre Optics

and Laser Instruments

92.72

23. Ms.K.Jamuna RaniAsst.Prof(Jr.)

EC1311 – Communication

Engg.

93.4 VLSI Design Workshop “Basic fire safety and emergency

preparedness” held at Sethu institute of technology, 21.08.2009

“Industrial automation” held at Sethu institute of technology, 21 to 24.03.2011Seminar

“Recent Trends in Knowledge Engineering &Machine Intelligence” held at Sethu Institute of Technology, 03, 04.08.2009

“How to Start Research Program” held at Sethu Institute of Technology, 24.06.2011

“Research Issues in Bio Image processing” held at K.L.N collegeFDP

“Industrial automation using PLC SCADA” held at Sethu institute of technology, 29,30.12.2009`

“Faculty induction programme” held at Sethu

Conferences “Higher order bit BCDL Adder with supply

voltage approaching Device threshold voltage” Paper Presented in the international conference on

26.1.2013 at Vicram Engineering college “ Bit BCDL Adder with supply voltage

approaching Device threshold Voltage” paper presented in the national conference on 28.4..2013 at Anna University Madurai

EI43 – Digital Logic Circuits

69

EI1353 – Industrial Instrumentation-II

98.3

EI55 – Communication

Engg.

93.55

EI 41 Industrial Instrumentation – I

85.45

EI 63 Digital System Design

73.77

EI 73 - VLSI Design

73.77

EI35 Electronic devices and

Circuits

78.12

insitute of technology, 29,30.07.2010 “Instrumentation & Automation” held at

Sethu institute of technology, 05.05.2011MG75 Principles of Management

100

EI55 Communication

Engineering

87.09

Prepared by, Approved by,

R.Subha, AP/EIE HOD/EIE

Documents

Workshop,Seminar Even Sem