Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
Guideline on
WORKPLACE RELATED ROAD SAFETY FOR MOTORCYCLIST By MSOSH Technical Committee
2
Contents 1.0 SCOPE AND PURPOSE ....................................................................................................................... 3
1.1 Application and Scope................................................................................................................... 3
1.2 Purpose ......................................................................................................................................... 4
2.0 TERMS AND DEFINITION ................................................................................................................... 4
2.1 Commuting Accident (CA) ............................................................................................................. 4
2.2 Industrial Accident (IA) .................................................................................................................. 5
3.0 ROLES AND RESPONSIBILITIES OF EMPLOYER ............................................................................ 5
3.1 Rider Management Policy ............................................................................................................. 5
3.2 Vehicle Management Policy .......................................................................................................... 6
3.3 Risk Management Policy ............................................................................................................... 8
4.0 RIDER MANAGEMENT ....................................................................................................................... 9
4.1 Recruitment Procedure ................................................................................................................. 9
4.2 Rider Categorization ................................................................................................................... 10
4.3 Riding Procedure ......................................................................................................................... 10
4.4 Riding Hours and Working Hours Limit ....................................................................................... 11
4.5 Rider Monitoring ......................................................................................................................... 11
4.6 Rider’s Health and Welfare ......................................................................................................... 12
5.0 VEHICLE MANAGEMENT ................................................................................................................. 12
5.2 Pre-Inspection checklist .............................................................................................................. 13
5.3 Maintenance ............................................................................................................................... 14
5.4 Vehicle Identification .................................................................................................................. 14
5.5 Additional Fittings/Accessories ................................................................................................... 15
5.6 Load Management ...................................................................................................................... 15
5.7 Road Tax ...................................................................................................................................... 15
6.0 RISK MANAGEMENT ........................................................................................................................ 15
6.1 Route Hazard Mapping (including Journey Management) ......................................................... 15
6.2 Merit and Demerit ...................................................................................................................... 15
6.3 Emergency Preparedness and Response (EPR) ........................................................................... 16
6.4 Accident investigation & reporting ............................................................................................. 16
7.0 PERFORMANCE EVALUATION ......................................................................................................... 17
8.0 ROAD SAFETY IMPROVEMENT ........................................................................................................ 17
ANNEX A ................................................................................................................................................ 18
Element of Driver Management ........................................................................................................... 19
9.0 WORKING COMMITTEE FOR THE GUIDELINES ............................................................................... 20
3
1.0 SCOPE AND PURPOSE
Motorcycling is an important and popular form of transport in Malaysia, but unfortunately
one which carries a significant risk. Employer has legal obligations to manage the safety of
staff who may use motorcycles to carry out their normal work duties.
The Occupational Safety and Health Act (OSHA) 1994, Act 514, Section 15 states that it shall
be the duty of every employer and every self-employed person to ensure, so far as is
practicable, the safety, health and welfare at work of all his employees.
(2) Without prejudice to the generality of subsection (1), the matters to which the duty
extends include in particular-
(a) the provision and maintenance of plant and systems of work that are, so far as is
practicable, safe and without risks to health;
(b) the making of arrangements for ensuring, so far as is practicable, safety and absence of
risks to health in connection with the use or operation, handling, storage and transport of
plant and substances;
(c) the provision of such information, instruction, training and supervision as is necessary
to ensure, so far as is practicable, the safety and health at work of his employees;
(d) so far as is practicable, as regards any place of work under the control of the employer
or self-employed person, the maintenance of it in a condition that is safe and without risks
to health and the provision and maintenance of the means of access to and egress from it
that are safe and without such risks;
(e) the provision and maintenance of a working environment for his employees that is, so
far as is practicable, safe, without risks to health, and adequate as regards facilities for their
welfare at work.
1.1 Application and Scope
This Guideline aim to provide Industries with information regarding Safety and Health
practices for motorcyclist. Knowledge on safety guidelines and control measures will help
to reduce or avoid Industrial Accident among workers that use motorcycle at work. Type
of job/task encountered are:
a) Courier Service:
A motorcycle courier, also known as despatch rider or motorcycle messenger, is a
courier using a motorcycle. Types of motorcycle used varies from 100 cc up to 1000
cc depending on the tasks given and distance covered. The courier is responsible
for the speedy and safe delivery of the items to the destination specified.
4
b) Food Delivery:
Retail food delivery is a service which a restaurant or independent food delivery
company using motorcycle to deliver food to customers. Most riders use
motorcycle less than 500 cc.
c) Meter Reader:
Typical duties of utility meter reader is riding along a route an recording the reading
on meters, inspecting meters for defects and monitoring for abnormal usage
volume or tampering that may indicate unlawful usage. Types of motorcycle used
usually less than 500 cc.
d) Highway Patrol:
Highway patrol is unit created to control traffic and monitoring road safety. Most
riders use motorcycle less than 500 cc.
e) Garbage Collector/ Sanitation Service:
Typical duties of garbage collector is riding along a route and collecting small
domestic waste.
f) Escort Services/ Security:
Escort rider is responsible on traffic safety during tour and procession. Types of
motorcycle used varies from 250 cc up to 1000 cc depending on the distance
covered.
g) Others: on-site technicians, bike tester
1.2 Purpose
The objective of this Guideline is to set standard for good technical practice to be
applied by Industries in reducing workplace related injury and accident among workers
that use motorcycle in their routine work. Statistics from commuting accident from
PERKESO showed increasing trend among general motorcyclist.
2.0 TERMS AND DEFINITION
For the purpose of this document, the following terms and definitions are defined.
2.1 Commuting Accident (CA)
An accident happening to an employee shall be deemed to arise out of and in the
course of his employment if the accident happens while the employee:
a. Is travelling on a route between his / her place of residence or stay and his
/her place of work;
b. Is travelling on a journey made for any reason which is directly connected to
his / her employment; or
c. Is travelling on a journey between his / her place of work and the place where
he takes his meal during any authorised recess.
5
2.2 Industrial Accident (IA)
A sudden and unforeseen event, attributable to any cause, which happens to a person, arising out of or in the cause of his work and resulting in an occupational injury to him / her.
3.0 ROLES AND RESPONSIBILITIES OF EMPLOYER
3.1 Rider Management Policy
Workers must inform the employer of any work situation presenting dangers and
should cooperate with the employer in the protection of health and safety and help
ensure that the working environment and working conditions are safe.
Workers are liable as motorcyclist on the roads and must obey the rules and
regulations that apply, concerning speed limits, use of mobile phones, riding and
resting regulations and in general being fit to drive and attentive while riding.
1. Safety Helmets:
The rider are required to wear safety helmets when the vehicle is in operation or
while riding in a vehicle. The rider is responsible for ensuring the goods are safe
to carry.
2. Impaired Riding:
The rider must not operate a vehicle at any time when his/her ability to do so is
impaired, affected, influenced by alcohol, illegal drugs, prescribed or over-the-
counter medication, illness, fatigue or injury.
3. Traffic Laws:
Riders must abide by the federal, state and local motor vehicle regulations, laws
and ordinances.
6
3.2 Vehicle Management Policy
Vehicle Condition:
Riders are responsible for ensuring the vehicle is maintained in safe driving
condition. Riders of daily rentals should check for obvious defects before leaving
the rental office/lot and, if necessary, request another vehicle of the first vehicle is
deemed unsafe by the employee.
3.2.1 Company/Employer:
The Company/Employer is responsible for directing an aggressive vehicle
safety program.
3.2.2 Employers will:
- Establish committee to govern vehicle management;
- Implement the Motor Vehicle Safety Program in their areas of responsibility;
- Establish measurement objectives to ensure compliance with the program;
- Organize Motor Vehicle Safety Program on annual basis;
- Provide assistance and the resources necessary to implement and maintain
the program.
3.2.3 Supervisors will:
- Investigate and report all accidents involving a motor vehicle used in
performing company business. Forward all accident reports to the Vehicle
Safety Coordinator;
- Be responsible for taking appropriate action to manage high risk drivers as
defined by this program;
- Provide driver training either internally or through external means for high
risk drivers.
3.2.4 Vehicle Safety Coordinators:
- Issue periodic reports of losses for the president's review;
- Review motor vehicle accident reports as part of the Company Accident
Review Board;
- Revise and distribute changes to the Motor Vehicle Safety Program to
managers, supervisors and drivers as necessary;
- Maintain appropriate records, where necessary.
7
3.2.5 Riders will:
- Always operate a motor vehicle in a safe manner as explained under the
section titled, "Vehicle Management Policy”.
- Maintain a valid driver's license and minimum insurance requirements on
personal vehicles used in company business;
- Maintain assigned vehicles according to established maintenance
standards.
3.2.6 Vehicle Use
3.2.6.1 Company Owned Vehicles
Motorcycles
Employees authorized by their supervisors will be permitted to operate
a motorcycle. When the motorcycle is ride for personal use, only the
employee will be permitted to operate the vehicle. No one under the
age of 18 will be permitted to operate the vehicle.
3.2.6.2 Personal Vehicles on Company Business
Employees who ride their personal motorcycles on company business
are subject to the requirements of this program including:
o Maintaining auto liability insurance with minimum limits of
(RM)__________ for bodily injury and (RM)__________ for
property damage with combined single limit of (RM)__________.
o Maintain current state vehicle inspections when required.
o Maintain their own vehicle in a safe operating condition when ride
on company business.
o Proof of insurance (copy of declaration page) will be sent to
______________.
o Acceptable Motor Vehicle Report (MVR).
o No ‘business use’ exclusion on personal insurance policy.
3.2.6.3 Rental Vehicles
8
- Rental vehicles will be leased from any 3rd party
- Collision damage waiver will be refused.
3.2.6.4 Unauthorized Use of Vehicles
Assigned riders and other employees will not allow an unauthorized
individual to operate a company vehicle. No exceptions! Disciplinary
action may be taken. Additionally, if unauthorized use results in an
accident, the responsible employee will be required to make restitution
for the damages.
3.2.7 Contractors and Temporary Hire Employees
Contractors and temporary employees will be treated as company employees and
will comply with the requirements of this program. Failure to meet all requirements
will result in the immediate loss of driving privileges.
3.3 Risk Management Policy
Employers are responsible to establish Risk Management Policy at the workplace and
observe the overall accident statistics which includes:
1. Establish a Review/Risk Committee to analyse road safety risks concerning
motorcyclists
2. Safe riding begins with the identification of the existence of risks. The riders can
then adjust their riding behaviour, in the sense that it allows for the fact that
people and property are at stake;
3. Estimate of the risk. This is a skill that must be learned. By experience the riders
will be able to assess risk better. For example, by not wearing insufficient
protective clothing while riding – employee will have no idea of the risks this
results until serious injury or when they have an accident;
4. Risk recognition. Riders cannot deal with risks if they don’t recognize them.
5. Convene an Annual Risk Management meeting
6. Organize a Risk Awareness week
There are two types of risks: subjective and objective. Subjective has to do with
behaviour and attitude of a riders. Objective is determined by environmental
factors, other vehicles and road conditions.
Risk management must be a logical consequence of your behaviour. There are
many other factors, such as weather, condition/state of your motorcycle and its
components, health, etc. Some motorcyclists manage risks instinctively. In principle
9
it is something which is intrusted in each one of us – it’s our natural defences
against undesirable situations.
Attitude and disposition of the motorcyclist may have an influence on how she/he
deals with risk. A positive attitude and the grasp of how to avoid accidents from
occurring and the ability to resolve problems will pretty much always score a good
result when it comes to reducing and avoiding risks. The risk factors are categorized
as human factors, vehicle factors and environment factors.
4.0 RIDER MANAGEMENT
In order to maintain motorcycle rider’s safety, health and environment at optimum levels, the
employer shall provide a practical and workable rider management programme. The following
factors shall be taken into account in order to design, develop and implement a rider
management programme at the workplace, but not limited to:
a) recruitment procedure;
b) rider categorization;
c) lifelong learning;
d) riding procedure;
e) riding hours and working hour limits;
f) rider monitoring;
g) rider’s health and welfare.
4.1 Recruitment Procedure
The employer shall investigate and identify the potential worker’s background prior to
recruitment. The minimum criteria for the recruitment process are:
a) at least holding a valid motorcycle licence (B2/B1/B);
b) acceptable riding/driving records on summonses/violations by examining the
databases of responsible authorities such as police and Road Transport
Department (RTD);
c) acceptable competency or proficiency level of rider by conducting preliminary
assessment; and
d) undergoing health screening at any hospital or clinic or health centre determined
by the employer and the cost of such health screening shall be borne by the
employer.
10
4.2 Rider Categorization
The employer shall identify and classify workers into several categories; professional,
skilled and semi-skilled riders. It shall be based on the following criteria:
a) licence classification;
b) driver card system – contains information on work experience, basic medical
information;
c) demerit points e.g. AWAS (Automated Awareness Safety System);
d) skills and competency; and
e) performance evaluation (e.g. consumer feedback).
4.2 Lifelong Learning
The employer shall provide sufficient platforms for lifelong learnings associated with
Safety and Health to all workers. The training shall include:
a) training of a technically skilled nature such as defensive riding, motorcycle handling
and control, inspection, maintenance, journey management, emergency response,
and other fit and proper trainings;
b) soft skills training such as positive thinking, anger and stress management, and
other appropriate trainings.
A combination of technical skills and soft thinking skills are important because with such
trainings provided by the employer, it is hoped the employees would be able to carry out
their work properly while reducing the risk of accidents or minimizing the impact of
accidents if they do occur. All of the trainings shall be conducted in continuous, periodical
and scheduled manners. Each and every training session conducted shall be properly
recorded.
The employer should also train their own employees to be the trainers in order to ensure
the continuity of the training programmes and to retain expertise within the organisation.
Training should be conducted by those who are competent and qualified to ensure the
quality and the effectiveness of the training.
4.3 Riding Procedure
The employer shall provide a checklist for the obligatory acts a driver needs to perform
before and while driving as well as upon reaching his destination. Such obligatory acts shall
include the following but not be limited to;
a) examining the driver’s records at the one-stop check centre when preparing the duty
roster
11
b) the riders shall be fit and feel good while driving by taking nutritious food;
c) not being allowed to take any medicine which may interfere with driving (such as
causing drowsiness);
d) having the drivers examined by a qualified supervisor to ensure they are in a fit state to
drive;
e) bringing along important documents (valid E licence, valid GDL/PSV licence, log book;
f) identity card or passport, and other documents deemed necessary;
g) wearing of spectacles by drivers who need spectacles;
h) reporting oneself for duty not less than 30 minutes before journey;
i) entering and reporting oneself to the supervisor and checking roster;
j) carrying out daily vehicle checks by checklist before and after journey; and
k) ensuring the vehicle has sufficient fuel (petrol/diesel), and refuelling if necessary, safety
procedure to be complied with.
4.4 Riding Hours and Working Hours Limit
The employer shall provide a practical and systematic schedule of riding and working hour
system for the workers. This matter shall be given due attention as it may pose a greater
risk of crash involvement due to fatigue and sleepiness issues. The matters that need to
be considered but subject to the prevailing acts if applicable are:
a) non-stop driving for a maximum of 4 hours;
b) total of 8 hours of driving per day (maximum);
c) total of 12 hours of work per day (maximum);
d) 30 minutes of rest per 4 hours of journey;
e) one (1) day of rest after every 6 days of work; and
f) a minimum of 12 hours of rest before starting first journey.
4.5 Rider Monitoring
The employers shall always monitor their employees to ensure that they constantly
comply with both safe working and riding procedures. Some of the monitoring methods
are:
a) checking the vehicle daily inspection form to ensure the driver examines the vehicle on
a daily basis;
b) constantly inspecting the workers’ record from the database of the authorities such as
the Police and the Road Transport Department (RTD). This is necessary to find out
whether or not the rider has any traffic offence records such as exceeding the
permitted speed limit, double-line overtaking and other offences;
c) providing a channel for complaints such as complaint/suggestion box and complaint
form for customer complaints to the employer relating to riding patterns and attitudes.
12
The employer shall pay serious attention to each offence or complaint. The driver shall be
given advice and counselling so that he may amend his driving habits and attitude.
4.6 Rider’s Health and Welfare
The employers shall provide guidance to their employees with regards to rider’s health
and welfare such as:
a) recorded periodical medical examination;
b) ensuring the worker is not allowed to work when not fit;
c) use a relief rider if the rider is deemed not fit enough to drive his/her motorcycle;
d) providing information relating to health care and well-being especially when riding.
Example – a physical exercise manual when stopping for rest;
e) providing information and educating workers especially the drivers on methods to
manage pressure, exhaustion and fatigue resulting from riding activity and work
pressure;
f) monitoring the attitude and behaviour of riders;
g) providing comfortable resting facilities for workers;
h) insurance coverage.
5.0 VEHICLE MANAGEMENT
Vehicle Management are Important as to ensure the safety of the rider/employee. The
rider/employee need to understand the vehicle specification, type of inspection and the needs
for maintenance. The benefit of vehicle management are the rider can ensure the motorcycle
in a safe ride able conditions and also the rider can fully operate the vehicle/motorcycle in it
best performance.
5.1 Motorcycle Specification
Before the rider can manage the vehicle/motorcycle, he/she has to know the
specification as to ensure the maintenance is adequate and correctly done.
There are various type of motorcycle design suit for the purpose and with the
suitability operation in the specific used.
Below are the type of Motorcycle and it usage:
• Moped / Cub / Commuter – commuting to work (short distance);
• Scooter – in town riding;
• Sport – commuting to work (long distance);
• Dual Purpose / Trail – Off road;
• Chopper / Custom – for leisure riding;
• Touring – convoy (long distance);
• Sidecar / Trike / ATV – For commercial use / for disable person / for leisure.
13
Rider also the need to understand the basic technology of the Motorcycle such as
engine type, number of cylinder, fuel supply system, displacement etc.
Below are the type of Motorcycle Technology:
• 2 stroke / 4 stroke;
• Carburetor / Electronic Injection;
• Single block with 1/2/3/4 piston;
• V twin block;
• Boxer block;
• Auto/Manual transmission;
• Transmission by Chain, Long Shaft or Belting connection;
• Air Cooled / Water Cooled;
• Braking system;
• Suspension system;
• Tire size and profile.
5.2 Pre-Inspection checklist
The employer should provide programs to facilitate regular vehicle/motorcycle
inspection activities. Employees should have a proactive attitude to ensure that
their vehicles, at all time, are in good condition and functioning well. Vehicle
inspection should be conducted daily and periodically to prevent crashes and
related losses. The suitable time to do an inspection are during washing the
motorcycle and before start to commute or ride.
The TCLOCK Method can be use as a reference when doing an inspection.
• T – Tyre and Wheels;
• C – Controls;
• L – Lights and Switches;
• O – Oil and Fuel;
• C – Chain and Chassis;
• K – Kick / Side stand;
a) Daily Vehicle Inspection
This will enable appropriate action or repairs be done to prevent mechanical failure
of the vehicle. Items that need to be inspected include control system, tire, brake,
lighting, etc. See Annex A for additional information on daily vehicle inspection
Employees should conduct daily inspection on their own vehicles/motorcycle
before and after commuting to work each day. The work use vehicle/motorcycle
provide by the employer also have to be check by the designated rider/employee.
b) Periodic Vehicle Inspection
14
The employer should organize the periodic vehicle/motorcycle inspection
programmed for all employees to ensure that vehicles are ‘fit for the task’ and are
insured, serviced and well maintained.
During vehicle/motorcycle inspection, employer with participation of their
rider/employees should also check the validity of employees’ driving license and
the vehicle/motorcycle road tax.
Basic vehicle inspection activity should be conducted by the vehicle / motorcycle
owner, which may be done together with the SHC based on a standard checklist
which include:
• side mirror;
• brake lights;
• signal lights;
• tire inspection; and
• hazard lights.
The employer should provide appropriate and sufficient training to the employees
before conducting the vehicle inspection and maintenance programmed. Record
on vehicles inspection, maintenance and repair should be documented and
properly kept for future reference.
5.3 Maintenance
The employee or rider make sure the the maintenance of the motorcycle must be
done according with the manufacturer recommendation. Replacement parts of the
motorcycle must meet the standard specification as OEM or parts that have
certification by recognize body as to ensure the quality and the safety of the
products. Any maintenance must be recorded, as to ensure traceability and for next
maintenance schedule reference.
5.4 Vehicle Identification
All vehicle/motorcycle use in the company as vehicle to perform work must be
identified and numbered for easy traceability of the vehicle/motorcycle and to
assign the designated employee/rider to take the responsibility of the wellness of
that vehicle/motorcycle.
15
5.5 Additional Fittings/Accessories
Any additional fitting/accessories install must be ensure it meet the related legal
requirement, have certification in term of safety/quality, ergonomically design and
not interfere the vehicle centre of gravity or motorcycle stability.
5.6 Load Management
Distribution of load during commute, the suitable design of goods compartment
and the stability are the main concern in load management. Failure to evaluate this
matter can cause effect to the suspension and also the braking system. Instability
can cause the vehicle/motorcycle hardly to be control and maneuverer.
5.7 Road Tax
Road Tax must be valid and with vehicle insurance coverage as to ensure that the
employee or the rider comply with related legal requirements. For work use
vehicle/motorcycle, the need for inspection related certification of fitness must be
done accordingly.
6.0 RISK MANAGEMENT
6.1 Route Hazard Mapping (including Journey Management)
Employee should establish their own Route Hazard Mapping for their commuting route
as to identify hazard and plan for risk control measures.
Employer should guide their employee on how to anticipate potential hazard through
their Route Hazard Mapping establishment.
Employer is responsible to provide information on accident-probe location nearby their
premise by posting them on the notice board in the organisation or through internal
communication channels that are available.
6.2 Merit and Demerit
Employer has the right to implement merit and demerit system for their employees
that could inculcate safety-conscious behaviour as it could change their attitudes,
improve riding habits and increase skills.
16
Employee who fail to abide the road transport rules shall be penalised through various
means such as disciplinary action, loss of certain benefits, etc.
The form of merit and demerit shall be established and agreed by both party and it
should not be intended to be punishment but more to providing lesson to employees
to be responsible on the road.
For merit system, employer should provide incentive to their employees to be
motivated in complying with road safety regulations such as;
• Allocation for motorcycle service / tyre replacement;
• Loan to purchase motorcycle and for major maintenance;
• Free cafeteria service / health food allowance;
6.3 Emergency Preparedness and Response (EPR)
Employer shall provide the procedure on the event of emergency and accident to
their employees. The emergency procedure includes;
• Office emergency contact number and the person in-charge;
• Third party contact number including police, hospital and ambulance;
• Emergency information card for all employees including blood type;
• If someone is injured, ensure that somebody remains with the injured person;
6.4 Accident investigation & reporting
All employees should report all types of injury due to work related accidents or
incidents including ill health diseases and near misses to their superior or designated
personnel immediately.
Employers are responsible to;
• Reporting all incident and accident cases. For fatal accident, the
employer/immediate supervisor shall immediately notify through Phone/SMS/
WhatsApp to CEO, top management and authorities’ i.e. DOSH, Police;
• Forming an investigation team immediately after an accident / incident
occurred;
• Ensuring a formal investigation report by the team is completed and signed;
• Implementing all necessary action recommended by the investigation team;
• Analyze any ensure corrective and prevention action are implemented
effectively.
17
7.0 PERFORMANCE EVALUATION
The employer particularly the top management shall review the workplace related road safety
by yearly basis. The top management should be knowledgeable in the total concept of
managing road safety issue and able to monitor related activities that are carried out within
the organisation including the assessment and of its achievement and effectiveness.
The yearly performance evaluation shall include leading and lagging indicators such as;
Leading Indicators:
• Safety Training for Riders;
• Behavioural Audits;
• Safety Audits;
• Safety Briefing;
• Near Misses Cases;
• Equipment/Motorcycle Maintenance;
• Hazard Identification & Risk Assessments.
Lagging Indicators:
• Injury Frequency Rate;
• Severity Rate;
• Lost Workdays;
• Road Safety Reportable Incidents;
• Employees Compensation Cost.
Employer shall monitor all aspects of its related road safety, to ensure that it performing to its
highest and to show if things are moving in the right direction. Having clear indicators will raise
awareness among employer and employees and focus attention where it’s needed most.
8.0 ROAD SAFETY IMPROVEMENT
Employer shall establish yearly Master Plan program in related to workplace road safety in their
organisation. The government and other relevant agencies should support and collaborate
with the employer to reduce work related road safety incident. Employers should take
proactive action or initiatives and provide prompt concerns raised by employees. The following
initiates can be implemented based on the organisation’s need and resources:
• Shuttle services to workplace – shared shuttle buses;
• Housing facilities – nearest hostel that is close to the workplace;
• Alternative working arrangement – flexible working hours;
• Rest facilities – providing napping facilities for employees working on shift;
• Managing work shift – work schedule to manage fatigue.
18
ANNEX A
MA
LA
YS
IAN
RO
AD
AN
D T
RA
NS
PO
RT
AT
ION
SA
FET
Y A
SS
OC
IAT
ION
No. 18 J
ala
n B
M 6
/5C
, S
eksyen 6
, B
ukit M
ahkota
,
43000 K
aja
ng, S
ela
ngor.
MA
LA
YS
IAR
OS
reg. no :
PPM-004-10-01042017
mrt
sa.o
ffic
e@
gm
ail.
com
fb : M
RT
SA
OFFIC
IAL
Nam
a
:N
o. K
. Pengenala
n:
Tarikh
:
Nam
a O
rganis
asi
:N
o. Lesen M
em
andu
:T. Tangan P
esert
a:
Kela
s L
. M
em
andu
:Tarikh T
am
at
:Jum
lah M
ark
ah
:
No. C
ukai Jala
n:
Tarikh T
am
at
:N
am
a P
em
eriksa
:
Jenis
/Model M
oto
sik
al
:N
o. Pendaft
ara
n M
oto
r:
Tanda T
angan
:
1: S
gt M
erb
ahaya
2: M
erb
ahaya
3: S
ederh
ana
4: B
aik
5: S
gt B
aik
1. En
gin
e7. R
an
tai / S
pro
ck
et
1. M
inyak E
ngin
e1
23
45
1. K
ete
gangan
12
34
5
2. M
inyak 2
T (
2 S
trok )
12
34
52. K
ehausan
12
34
5
3. A
ir R
adio
tor
12
34
53. M
inyak P
elin
cir
12
34
5
4. A
ir B
ate
ri1
23
45
12
34
5
8. K
ead
aan
Ke
se
luru
han
2. L
am
pu
( D
en
ga
n E
ng
ine D
ihid
up
ka
n )
1. B
ar
Handel
12
34
5
1. Lam
pu D
epan
12
34
52. A
bsorb
ers
/ S
uspensi
12
34
5
2. D
im1
23
45
3. Tanki
12
34
5
3. Lam
pu B
ela
kang
12
34
54. Pela
na
12
34
5
4. Lam
pu Isyara
t H
adapan K
iri / K
anan
12
34
55. M
udguard
12
34
5
5. Lam
pu Isyara
t B
ela
kang K
iri / K
anan
12
34
56. N
o. Pla
t1
23
45
7. Tongkat
12
34
5
3. C
erm
in P
an
dan
g B
ela
kan
g8. Fairin
g1
23
45
1. K
iri / K
anan
12
34
59. Lam
pu-L
am
pu
12
34
5
4. T
ayar / R
od
a9. A
latg
an
ti / P
erk
ak
as
1. Tekanan U
dara
Sem
ua T
ayar
12
34
51. Plu
g1
23
45
2. B
unga H
adapan (
Min
. 3.0
mm
)1
23
45
2. K
unci S
pare
12
34
5
3. B
unga B
ela
kang (
Min
. 3.0
mm
)1
23
45
3. Pem
buka P
lug / R
oda
12
34
5
4. R
ada T
idak G
elo
ng / R
eta
k / B
ala
ncin
g1
23
45
4. Tiu
b S
pare
12
34
5
5. Pum
p A
ngin
12
34
5
5. B
re
k
1. K
eadaan C
eper
/ Pad / L
inin
g1
23
45
10. P
ak
aia
n
2. U
jian K
ecem
asan
12
34
51. Topi K
ele
dar
12
34
5
3. Lara
s F
ree P
lay L
ever
12
34
52. V
isor
12
34
5
3. Jaket
12
34
5
6. K
ab
el-
Kab
el
4. B
oot
12
34
5
1. B
reak
12
34
55. S
aru
ng T
angan
12
34
5
2. C
lutc
h1
23
45
6. B
aju
Huja
n1
23
45
3. S
peedo
12
34
5
Ko
me
n K
es
elu
ru
han
(n
ota
: k
en
de
raan
din
as
ihatk
an
un
tuk
tid
ak
be
rad
a d
ijala
nraya jik
a b
erad
a d
i s
kala
mark
ah
1 a
tau
2 -
pe
nam
bah
baik
an
SEG
ER
A d
ipe
rlu
kan
) :
Nam
a P
em
eriksa
:N
o. K
. Pengenala
n:
Tarikh
:
Nam
a O
rganis
asi
:Jabata
n:
Mark
ah
Mark
ah
Gag
al
Lu
lus
Gag
al
Lu
lus
BO
RA
NG
PE
ME
RIK
SA
AN
KE
ND
ER
AA
N
19
Element of Driver Management
20
9.0 WORKING COMMITTEE FOR THE GUIDELINES
1. Malaysian Society for Occupational Safety and Health (MSOSH)
2. Pertubuhan Keselamatan Sosial (PERKESO)
3. Department of Occupational Safety and Health (DOSH)
4. National Council for Occupational Safety and Health (NCOSH)
5. Malaysian Institute of Road Research (MIROS)
6. Jabatan Keselamatan Jalan Raya (JKJR)
7. Majlis Keselamatan Jalan Raya (MKJR)
8. Malaysian Road and Transportation Association (MRTSA)
9. Malaysia Automatic, Robotic and IoT Institute (MARii)
10. Malaysia Driving Instructor Association (MyDIA)
11. CITY-LINK Express