Wool Slayer 1

8/22/2019 Wool Slayer 1

1/8

Woolslayer Companies Inc. (WCI) is a top name in the globalpetroleum industry and is recognized as a pioneer in the design and fabrication

of innovative masts, derricks and a variety of drilling technology. Equipment

manufactured by WCI is on top of the job for virtually every major drilling

company, and is used throughout the world in every conceivable drilling

condition, both onshore and offshore.

A Legendary HeritageWCI traces its heritage to 1907 and the legendary Lee C. Moore

Corporation (LCM). In 1936, H.J. Woolslayer, an innovator in the design and

engineering of oilfield equipment, became a partner in LCM, and a few years later its

sole owner.

In 1938 LCM revolutionized the petroleum industry, when it designed and

built the first Cantilever mast, a structure that could be easily assembled by the

drilling crew, strung up on the ground, and raised to drilling position without

special equipment or requiring the services of rig builders. It could also be moved

quickly from one location to another, which greatly reduced the costs of drilling

wells. To date the company has manufactured over 5,000 Cantilever masts.

A Record Of LeadershipToday, WCI provides the worldwide petroleum industry with drilling

equipment solutions and engineering from corporate headquarters in Tulsa,

Oklahoma. Modern test assembly and shipping facilities at the nearby

Port of Catoosa ensure ease of shipment by land or sea. In additionto our sales offices located in Houston, WCI has a fabrication facility in

Liberty, Texas.

WCI employees are some of the most experienced in the industry,

applying the background, knowledge and engineering advancements with years

of services.

Innovation From The Top Down

WOOLSLAYER COMPANIES INC.M a s t s , D e r r i c k s & D r i l l i n g A c c e s s o r i e s f o r t h e W o r l d w i d e P e t r o l e u m I n d u s t r y


2/8

WCI is instrumental in the design and fabrication of derricks for deep well

offshore drilling. Whether you need a standard derrick or a custom design for a

special application, WCI derricks are built under license of API-4F, and feature

the design integrity that has made them the standard of the industry.

Standard DerricksWCI builds a wide range of derricks for use on fixed platform drilling rigs.

Dynamic DerricksWCI Dynamic Derricks resist the hull motion of semi-submersibles, drill ships

and jack-ups under tow. Dynamic derricks are also provided to resist seismic

induced loads on offshore platforms. All types of motion compensators, power

swivels and pipe-racking systems are accommodated.

Innovative, Dependable Derricks

DERRICKS

HOOK

CAPACITY

MODEL HEIGHTBASE

WIDTH

NUMBER

OF LINES

STRUNG

TOP

2,500,000 15263 170 40 x 40 16 18

2,000,000 15270 170 40 x 40 16 18

2,000,000 15267-A 170 40 x 40 16 18

1,500,000 15269 160 36 x 36 14 18

2,500,000 15265 160 36 x 30 14 18

1,500,000 15266 160 36 x 36 14 14

1,300,000 15267 170 40 x 40 14 14

1,300,000 15268 160 30 x 30 14 14

1,250,000 15262 170 30 x 30 14 14

1,000,000 15259 170 30 x 30 12 14


3/8

WCI designs and manufactures a variety of masts for both onshore and offshore applications. Each one is built to

demanding industry specifications. In addition, WCI designs and fabricates special application masts to fit any need.

Many of the top quality masts designed by LCM are still in use 30, 40, even 50 years after being put into service.

Some WCI masts have been used to drill conventional wells to depths in excess of 30,000 ft. Permanent records are

maintained on each mast, and WCI is able to supply technical information, furnish replacement parts, and provide

expert field service whenever and wherever its needed.

Bootstrap MastsThe Bootstrap Mast features mast sections, which are inserted into the bottom section of the mast and hydraulically

raised to working position.

Butterfly MastsFeaturing the patented folding mast section, the Butterfly Mast is specially designed for highway transportation and

expedient rig-up.

Cantilever MastsFirst introduced more than 60 years ago, the Cantilever Mast is designed to be installed on a box-on-box style or

self-erecting substructure.

Hi-Floor MastsHi-Floor Masts utilizes a special cantilever design, which carries its own floor. The Hi-Floor Mast design provides

clearance beneath the rotary beams for various wellhead and blowout preventor configurations. The Hi-Floor Mast is

an alternative to the box-on-box style of substructure and is lighter and easier to transport.

Mast Designs


4/8

WCI Crown BlocksWCI manufactures a complete line of standard and custom Crown Blocks for

masts and derricks in accordance with API Specification 8C.

Industrial SheavesWCI Sheaves, using roller bearings, are designed and fabricated to quality

standards that meet API Specification 8C.

Blocks & Sheaves

DERRICK CROWN BLOCK SIZES & SPECIFICATIONS

Capacity(Tons)

Rated StaticHook Load

Capacity(Tons)

Number ofSheaves

SheaveDiameter

GrooveDiameter

420 350 6 42 1 1/4 1 3/8

583 500 7 50 1 3/8 1 1/2

583 500 7 60 1 3/8 1 1/2

743 650 8 60 1 1/2 1 5/8

857 750 8 60 1 1/2 1 5/8

1,125 1,000 9 72 1 7/8 2

SHEAVE SPECIFICATIONS

Sheave O.D. Shaft Size Bearing

20 5 1/2 Straight Roller

24 5 5/8 Tapered Roller

24 4 Straight Roller








36 8 Tapered Roller





42 8 Tapered Roller



48 8 Tapered Roller




48 10 Tapered Roller



















CATLINE AND CORELINE SHEAVE UNITS

Unit Model No.Sheave

O.D.Groove

SizeCapacity Bearing

CatlineSheave

1476 155/8 O.D.3/4 O.D.

1 1/2 O.D.

12,000 Lb.SLT*

BronzeBushing

CorelineSheave

1489 249/16 O.D.5/8 O.D.3/4 O.D.

18,000 Lb.SLT*

TaperedBearing

* Single Line Tension

TRAVELING BLOCK SPECIFICATIONS

Capacity(Tons)

Number ofSheaves

Sheave O.D. Groove O.D.Weight Lbs.

(Est.)

350 5 42 1 1/4, 1 3/8 8,800

500 6 50 1 3/8, 1 1/2 13,500

500 6 60 1 3/8, 1 1/2 17,500

650 6 60 1 1/2, 1 5/8 22,000

750 7 60 1 1/2, 1 5/8 25,500

1,000 8 72 1 7/8, 2 30,600


5/8

WCI supplies a complete line of BOP Handling Systems in capacities from

20-tons to 100-tons. Each system is furnished with two (2) WCI hydraulic

cylinder hoists, two (2) trolley beams, a BOP handling cradle, control console

and supply hoses. The hoists are furnished with 10 ft. of lift, geared type trolleys

(manual and powered) and hoisting lines.

In addition, WCI provides a transportation skid for handling the BOP hydraulic

hoists, and an adjustable BOP transportation and test stump skid system

designed to accommodate the BOP stack.

Deadline AnchorsDesigned and manufacztured to API-8C certification, WCI Deadline Anchors are

available in both pedestal and leg-mounted configurations.

These high-quality anchors are rated to 100,000 lb. and 50,000 lb. single-line

pull capacity, and feature all-welded construction. In addition, they come with

Lebus grooving for 138 diameter through 1 diameter dri lling line with tapered

roller bearings.

WCI Deadline Anchors are furnished with load cells, and anchor bolt patterns are

interchangeable with oilfield standards. Other pedestal-type WCI anchors are

available for use as breakovers for raising and lowering masts.

BOP Handling Systems


6/8

Casing Stabbing PlatformsWCI provides both air-powered and hydraulic Adjustable Casing Stabbing

Platform Units. The work platform is adjustable from 23 ft. to 47 ft. elevations

above the drill floor, mounted on cam rollers, and designed to fold up against

track for storage and transport. The WCI Casing Stabbing Platform is designed,

fabricated and tested in accordance with industry standards and is ABS certified.Each unit includes the following:

Air powered manriding hoist UL certified for 1000 lb., furnished withautomatic spring-actuated power-released primary load brake

Two dynamic safety brakes, furnished with a positive mechanical (wedgetype) locking device designed to actuate in case of hoist failure oroverspeed

Derrickmans belt

Derrickmans harness with shoulder straps and safety line withattachment padeye

Safety screen installed on backside of work platform

Guide track

Work platform includes counter-weighted hinged.

Personnel ElevatorThe WCI Hydraulic Powered Personal Elevator is designed to travel from the

ground to the drill floor elevation. A high-quality personnel car with a 4 ft.square floor area is mounted on dual track beams with cam rollers. The unit is

available in both hydraulic and electric powered configuration. Each unit includes

the following:

Dynamic safety brakes

Safety gate

Safety screen

Tailboard skids on track frame

Padeyes for pinning to drill floor and sub-base at ground level

Lifting eyes

Rated for 2,000 lb. capacity

Casing Stabbing Platforms & Personnel Elevators


7/8

WCI offers comprehensive engineering services through our LCM Engineering

Division, serving the petroleum, offshore, civil, electrical, manufacturing and

aerospace industries.

LCM Engineering has designed and fabricated oil-drilling equipmentsince before 1930, and has regularly met all certification requirements,

adhering to API quality control, and other specifications outlined by AWS, ANSI,

and ASTM.

Historically, WCI has provided complete engineering studies on

equipment such as derricks, masts, cranes and substructures. LCM Engineering

has also produced extensive studies for various modifications made to

existing structures.

LCM Engineering specializes in the application of engineering,

computing and management techniques for carrying out engineering projects.

The engineering staff has many years of theoretical and practical experience in

all engineering disciplines applied to major projects around the globe.

Primary LCM Engineering Services Structural design and analysis

Historical research of existing structures

Computer-aided design

Structural monitoring

Field surveys of existing structures

On-site fabrication inspection

Test assembly

Field supervision of installation and commissioning

LCM consulting and engineering services allow WCI to fabricate products for

customers at a qualified facility of their choice. With complete turnkey services,

LCM Engineering handles every phase of a project.

Worldwide Field ServiceWCI engineers and field technicians are available and frequently travel

wherever customers require. With drilling rigs working around the world, the

constant demand for WCI expertise and field service is met with industry

veterans who have the professional know-how and access to WCI products and

technology. The result is less downtime and a more cost-effective drilling

operation. Comprehensive field service by WCI includes inspection, Recertification,

and supervision of modification and repairs for masts, derricks, substructures

and many other WCI products.

Engineering And Field Services


8/8

LICENSED UNDER API LICENSED UNDER API

4F AT PORT OF CATOOSA, OK 8C AT LIBERTY, TX

P.O. BOX 216 TULSA, OK 74101-0216 TEL.: (918) 523-9191 FAX: (918) 523-0854

5002 BIRD CREEK AVENUE CATOOSA, OK 74015-3011 TEL.: (918) 266-3927 FAX: (918) 266-4681

3810 BEAUMONT AVENUE LIBERTY, TX 77575 TEL.: (936) 336-8884 FAX: (936) 336-8894

5065 WESTHEIMER, SUITE 850E HOUSTON, TX 77056 TEL.: (713) 552-1122 FAX: (713) 552-1205

E-MAIL ADDRESS: [email protected] /WEBSITE: www.lcm-wci.com

TOLL FREE 1-800-864-8794
mailto:[email protected]?subject=Composite.Catalog.Information.Requesthttp://www.lcm-wci.com/http://www.lcm-wci.com/mailto:[email protected]?subject=Composite.Catalog.Information.Request

Documents

Wool Slayer 1