WOODlife Flooring - brochure unfinished flooring 2015

www.woodlife-flooring.com

1

by Dutch Design _ 2015 QUALITY ENGINEERED FLOORING _


2

WOODlife in a nutshell Background WOODlife Flooring is a Dutch flooring brand with a factory located in Lithuania. The Lithuanian based company was established in 1993, not long after Lithuania’s independence and is lead by two Dutch owners with a background in international sustainable forestry and timber technology. The core activity is the production of high quality, wide width, long length, two-layer, one-strip engineered floorboards which is sold under WOODlife Flooring brand. The main WOODlife sales office is located in the Netherlands. Next to our own production facility, we have joint ventures with a range of quality mills throughout Europe and stock additional flooring products. In this way we can be of best service to our clients and are able to offer almost everything. Multiplanks The main wood species we work with are: European ash, European oak, European douglas, Dutch elm and American black walnut. Our two-layer engineered floorboards have a single-strip top layer with a thickness up to 6.5 mm, are up to 300 mm wide and up to 4 meters long. The top layers are glued & pressed on top of first quality cross-layer water resistant Siberian birch plywood. All our oak, ash, douglas, elm and walnut top layers are carefully cut from fresh raw material and then dried at a moderate rate. As a result, the top layers keep an even colour and do not show hair cracks. The sensibility of our multiplanks due to changes in moist and temperature is therefore reduced to the very minimum.

Finishing at your wishes All flooring products offered in this brochure are unfinished. We can finish your flooring according to your wishes though: brushing, oiling, (core) smoking, staining, lacquering, aging, custom bevels, etc. Next to our exclusive DEEP Down Collection, we develop custom floor collections and private label concepts. Green Building & environment WOODlife’s multiplanks are BREAAM approved. The approval implies that the products have passed tests for all major European regulations on the presence of VOC’s and Formaldehyde in wooden flooring. Of course we can also supply our flooring FSC®-certified. WOODlife does not waste any wood. Leftovers are used to produce skirting and home decorations. The remainder as well as all our saw dust is used as fuel wood to heat the entire factory including drying kilns. Approach We like to regard you as a partner instead of a client: close contact, short communication lines and a personal, no-nonsense approach. As a small-to-medium sized manufacturer we like to be closely involved in your projects in an early stage to provide optimal support to you and your client.

“ Our flooring is not made just to be beautiful. With an eye for design and true passion for wood as a raw material,

WOODlife Multiplanks are meant to be remarkable: beautiful, reliable, durable, uncommon & environmentally friendly. “

Please find the key specifications of our products and finishing in the next chapters. For more technical info we refer to our Technical Info Sheets and Product Declarations. We hope you might be interested in our product range and are always on the look-out for long lasting business relationships. With kind regards, Stefan Verhagen Thomas van Lieshout Product Development, Marketing & Sales Purchase, Production & People


3

1 Oak multiplanks

EUROPEAN OAK Lengths Select Nature Rustic Robust

12 mm 180 mm 1000-2400 mm X X X OK

16 mm 140 mm 1000-2400 mm OK OK OK OK

16 mm 160 mm 1000-2400 mm OK OK OK OK

16 mm 180 mm 1000-2400 mm OK OK OK OK

16 mm 200 mm 1000-2400 mm X X OK OK

16 mm 220 mm 1000-2400 mm OK OK OK OK

21 mm 140 mm 1000-2400 mm OK OK OK OK

21 mm 180 mm 1000-2400 mm OK OK OK OK

21 mm 220 mm 1000-2400 mm OK OK OK OK

21 mm 260 mm 1000-2400 mm OK OK OK OK

21 mm 300 mm 1000-3000 mm OK OK OK

OAK - EXTRA LONG Lengths Select/Nature Rustic/Robust

21 mm 220 mm 3000-4000 mm OK OK

21 mm 260 mm 3000-4000 mm OK OK

21 mm 300 mm 3000-4000 mm OK OK

OAK RIFT/QUARTER Lengths AA-Select Select

16 mm 140 mm 2000-3000 mm OK OK

16 mm 180 mm 2000-3000 mm OK OK

16 mm 220 mm 2000-3000 mm OK OK

21 mm 140 mm 2000-3000 mm OK OK

21 mm 180 mm 2000-3000 mm OK OK

21 mm 220 mm 2000-3000 mm OK OK

PRODUCT DESCRIPTION Lengths 140-260 mm: min 75% long (2000/2200/2400 mm)

max 25% short (1000-1200 mm) Lengths 300 mm: min 75% long (2400-3000 mm) max 25% short (1000-2200 mm)

Base: 9, 12 or 15 mm cross layer Russian birch plywood Top layer: 3, 4 or 6 mm European oak (Quercus Petraea) Tongued and grooved on four (4) sides, open defects filled and sanded Beveled on 2 or 4 sides, or square-edged. Moisture content: KD 7-9%

OPTIONS Custom made boards for installation over structural beams. Thickness up to 28 mm.

Also possible as three-layer product, where the bottom layer acts as a ceiling. FSC-certificate Length options:

1000-3000 mm 2000-2400 mm only 2000-3000 mm only one fixed length only


4

GRADES 140-220 MM Select: acceptable sound pin knots up to 1 cm without colour change of the board. Nature: sound knots max. 2,5 cm, knotholes max. 1,5 cm, slight colour changes allowed, no cracks allowed, no sapwood. Rustic: sound knots max. 5 cm, knotholes max. 3 cm, no heart, no sapwood, changes in colour allowed,

(end) cracks allowed with a maximum length of 20 cm and max 0,5 cm wide, ingrown bark allowed with a length up to max 6 cm (cleaned and filled), no (discoloration due to) brown rot, no insect damage, no worm(holes), no rouge.

Robust: sound knots max 9 cm, knotholes max. 4 cm, heartwood allowed, cracks allowed until a length of 80 cm and max 0,5 cm wide, colour variations allowed, no (discoloration due to) brown rot, no sapwood, no insect damage, no worm(holes).

GRADES 260-300 MM Select: acceptable sound pin knots up to 1 cm without colour change of the board. Nature: sound knots max. 3 cm, knotholes max. 2 cm, slight colour changes allowed, minor cracks up

to 10 cm allowed, no end cracks, no sapwood. Rustic: sound knots max. 6 cm, knotholes max. 4 cm, minor traces of heart allowed (up to 30 cm), no

sapwood, changes in colour allowed, (end) cracks allowed with a maximum length of 30 cm and max 0,5 cm wide, ingrown bark allowed with a length up to max 6 cm (cleaned and filled), no (discoloration due to) brown rot, no insect damage, no worm(holes), no rouge.

Robust: sound knots max 9 cm, knotholes max. 5 cm, heartwood allowed, cracks allowed until a length of 80 cm and max 0,5 cm wide, colour variations allowed, no (discoloration due to) brown rot, no sapwood, no insect damage, no worm(holes).

Select Nature

Rustic Robust


5

OAK RIFT & QUARTER SAWN

Straight grain

All rift & quarter sawn boards share one common characteristic: the growth rings manifest themselves on the face of the board as straight grain.

Medullary rays

Medullary rays are an important part of a tree’s biology, supplying water and nutrients as the tree grows. These large bands of radial cells, or medullary rays, emanate outward from the center of the log, similar to the spokes of a wheel. While all trees have medullary rays, they are most pronounced in the oaks and to lesser degrees in the other hardwoods. The quarter sawing process reveals the beautiful and uniquely distinctive appearance of these rays. In quarter sawn oak, a visual distinction is made between “quartered” and “rift” boards: Quartered boards exhibit the most medullary rays. Rift boards exhibit less to no medullary rays. The medullary rays literally jump off the face of the board when finished. It is this sparkle that makes quarter sawn flooring the preferred choice for architectural and design projects of distinction. Rift & Quarter sawn oak flooring in light shades is highly valued in minimalistic interiors.


6

2 Ash multiplanks

EUROPEAN ASH Lengths Select/Nature Rustic

16 mm 180 mm 1000-3000 mm OK on request only




PRODUCT DESCRIPTION Standard widths: 180/220/260 mm, other widths only on request. Lengths: min 75% long (2000-3000 mm), max 25% short (1000-1500 mm) Base: 12 or 15 mm cross layer Russian birch plywood, top layer: 4 or 6 mm European ash (Fraxinus excelsior) Tongued and grooved on four (4) sides, open defects filled and sanded Beveled on 2 or 4 sides, or square-edged. Moisture content: KD 7-9% Grades: Select/Nature: unselected for colour (brown), occasional sound knots max 2 cm, open knots max 1 mm (filled), no heartwood, minor (end) cracks allowed (filled). Rustic: unselected for colour (brown), sound knots max. 9 cm, knotholes max. 4 cm (filled), heartwood is allowed, (end) cracks allowed up to 20 cm.

OPTIONS Custom made boards for installation over structural beams. Thickness up to 28 mm.

Also possible as three-layer product, where the bottom layer acts as a ceiling. FSC-certificate Length options:

2000-3000 mm only one fixed length only

All our flooring can be finished according to your wishes; see chapter 9.

Rustic

Select/Nature


7

3 Douglas multiplanks Douglas originates from the regions of the west coast of North-America en was introduced in Europe around 1850. The timber of the Douglas which originates from North-America is sold in Europe under the name of Oregon pine. Timber of Douglas that is grown in Europe is sold under the name ‘Douglas’. The colour of the core of Douglas is light reddish to brown-red. Douglas is, even as larch, one of the most durable coniferous wood species from European forests. After drying, the timber becomes very hard. Douglas contains raisin, which can sometimes come up even after a few years.

EUROPEAN DOUGLAS Lengths Select/Nature Mill run

16 mm 220 mm 2000-3000 mm OK OK

21 mm 300 mm 2000-3000 mm OK OK

21 mm 300 mm 3000-4000 mm OK OK

SPECIFICATIONS Base: 12 or 15 mm cross layer Russian birch plywood, top layer: 4 or 6 mm Douglas (Pseudotsuga Menziesii) Lengths: 2000-3000 mm random Moisture content: KD 7-9% T&G on four sides Beveled on 2 or 4 sides or square edged Open defects filled and sanded Grading: Select/Nature or Mill run

Select/Nature: sound knots up to 3 cm, open knots max 1,5 cm (filled), no heart, no end cracks. Mill run: sound knots without any limitations, open knots max 3 cm (filled), heart allowed, end

cracks up to 10 cm allowed.

OPTIONS Custom made boards with a thickness from 12 up to 28 mm FSC-certificate, ask for possibilities Finishing according to your wishes


8

4 American black walnut multiplanks

AM BLACK WALNUT Lengths Select/Nature Rustic

15 mm 140 mm 600-2400 mm OK OK

15 mm 180 mm 600-2400 mm OK OK

20 mm 140 mm 600-2400 mm OK OK

20 mm 180 mm 600-2400 mm OK OK

PRODUCT DESCRIPTION Standard widths: 140/180 mm, widths only on request. Lengths: random lengths 600-2400 mm Base: 12 or 15 mm cross layer Russian birch plywood,

top layer: 3 or 5 mm American black walnut (Juglans nigra) Tongued and grooved on four (4) sides, open defects filled and sanded Beveled on 2 or 4 sides, or square-edged. Moisture content: KD 7-9% Grades:

Select/Nature: some traces of sapwood allowed (steamed), occasional sound knots up to 3 cm, filled defects up to 1 cm, no cracks, no center core, no other defects

Rustic/Robust: sapwood may occur till 50% of the width of the board, occasional sound knots up to max. 8 cm, filled defects max. 3 cm, some center core allowed, some minor cracks allowed, no other defects.

All our flooring can be finished according to your wishes; see chapter 9.


9

5 Dutch elm multiplanks

DUTCH ELM - mixed width only Lengths Mill Run

21 mm 180 / 220 / 260 mm 1000-3000 mm OK

PRODUCT DESCRIPTION Random widths: 180/220/260 mm.

Fixed widths only upon request. Lengths: 1000-3000 mm random Base: 15 mm cross layer Russian birch plywood,

Top layer: 6 mm Dutch elm (Ulmus Hollandica X) Tongued and grooved on four (4) sides, open defects filled and sanded Beveled on 2 or 4 sides, or square-edged. Moisture content: KD 7-9% Grade: Mill run only. All our flooring can be finished according to your wishes; see chapter 9.


10


11

6 Multiplank - patterns

WHALEBONE® & GIANT CHEVRON

Ever seen a giant herringbone or Chevron floor? If you have, you will probably remember. This very impressive floor is gaining popularity fast and is often used in manors, shops, restaurants and hotels. Our Whalebone® is produced using high tech end matching machinery. All boards are hand-checked. Therefore the fitting of this giant herringbone is flawless. Because of the two-layer system, they can even be installed floating.

Product description Base: 12 or 15 mm cross layer Russian birch

plywood, top layer: 4 or 6 mm Tongued and grooved on four (4) sides,

open defects filled and sanded Square edge or micro bevel Moisture content: KD 7-9% Grades: according to chapter 1-4. Chevron patterns are possible too (also known as the Hungarian pattern). Our Chevron floors are CNC profiled on the head ends to ensure a perfect fitting. Head ends are grooved on both ends; a separate tongue is supplied.

Marquetry lines (core smoked oak)

Thickness Width Length

16 mm 10 mm 1000-2400 mm

16 mm 20 mm 1000-2400 mm

21 mm 10 mm 1000-2400 mm

21 mm 20 mm 1000-2400 mm

Other species only upon request. Other dimensions only upon request.

Standard sizes

Thickness Width Length T & G

16 mm 140 mm 700 mm 4 sides


16 mm 180 mm 720 or 900 mm 4 sides

16 mm 220 mm 1100 mm 4 sides


21 mm 180 mm 720 or 900 mm 4 sides

21 mm 220 mm 1100 mm 4 sides

Custom made sizes are possible. Simply contact us. When calculating the surface needed, please take a saw waste percentage of app. 10% into account.

http://89.33.97.30/clients/woodlife/index.php?option=com_content&view=article&id=97&Itemid=165&lang=en

http://89.33.97.30/clients/woodlife/index.php?option=com_content&view=article&id=97&Itemid=165&lang=en


12

DUTCH PATTERN

As a Dutch owned company, of course we also produce giant Dutch patterns. This engineered pattern floor is known for its elegancy and simplicity and is often used in restaurants, hotels and large residential objects. Our Dutch pattern is produced using high tech end matching machinery. All boards are hand-checked. Therefore the fitting of this giant is flawless. Because of the two-layer system, they can even be installed floating.

Product description Base: 12 or 15 mm cross layer Russian birch

plywood, top layer: 4 or 6 mm Width of the board: 180 mm Tongued and grooved on four (4) sides,

open defects filled and sanded Square edge or micro bevel Moisture content: KD 7-9% Grade: to be agreed upon.


13

SEMI TRAPEZIUM

If you are open to something you really don’t see every day, then go ahead and take a look at our giant Semi Trapezium pattern. Really, anyone walking over this grand floor design will be left astonished.

Product specifications Wood specie: European oak, ash and douglas. Thickness: 16 or 21 mm Top layer: 4 or 6 mm Backing: 12 or 15 mm Russian exterior

birch plywood Moisture: KD 7-9% The boards are tongued and grooved on the long sides. 50% left and 50% right pieces per package. Head ends are both grooved; separate long tongues are supplied to ensure perfect straight lines.

CHOOSE YOUR: 1. Species & dimension - other dimensions on request

2. grade: 4 oak grades, 1 ash grade, 2 douglas grades

3. bevels: 1 mm micro bevel, 2 mm bevel, square edges, hand scraped bevel, U-shaped bevel.

4. surface: sanded, (hand) planed, brushed, aged, fine sawn

5. finish: choose your WOODlife finish or let us design a unique custom colour.

SPECIES W-1 W-2 L

OAK 140 mm 95 mm 700 mm

OAK 180 mm 120 mm 900 mm

OAK 220 mm 150 mm 1100 mm

OAK 260 mm 180 mm 1200 mm

OAK 300 mm 210 mm 1500 mm

ASH 140 mm 95 mm 700 mm

ASH 180 mm 120 mm 900 mm

ASH 220 mm 150 mm 1100 mm

ASH 260 mm 180 mm 1200 mm

DOUGLAS 300 mm 210 mm 1500 mm

W-1

W-2


14

6 Solid floors

6.1 SHRUNK OAK

This distinctive, solid oak floor is characterized by it’s height differences throughout the entire surface of the board. The organic surface is truly natural, which means it is not manipulated by man whatsoever. It’s a result of a crafty way of cutting old oak logs and delicate processing of the fresh cut raw material. All we have done to the surface is wire brushing it to remove any unpleasant splinters and to give it a warm, friendly feeling.

Thickness: 20-22 mm Widths: 220 mm only Lengths: 2000-2400 mm, no short lengths Grade: Rustic/Robust mix grade Open defects: unfilled Surface: natural height differences, brushed Finishings available: O-04 (Soft White), O-010a (Single Smoked Pure), O-112 (St. Antoine), O-203abcd (natural

oiled).

The available finishings are all applied by hand and are of a natural kind with a minimum of colour pigments.

6.2 WIDE SOLID OAK

No shit, just bold, wide solid oak floorboards. Available in 21x220, 25x260 and 25x300 mm wide and up to 3 meter long. Comes in a Rustic/Robust mix grade. Produced on request, starting from 200 m2.

6.3 RECLAIMED FRENCH OAK

Reclaimed oak from old, French goods carriages. The old, reclaimed boards are: de-nailed cleaned slightly wire brushed to remove stubborn dirt calibrated to a fixed width by profiling the edges for a better fitting The final reclaimed floorboards are supplied in a thickness of app 20 mm, in random widths from 120 to 200 mm and random lengths of 1500-2700 mm.


15

6.4 STRIP FLOORING (TAPIS)

WOODlife also produces strip flooring (called ‘tapis’ in French). Some countries, such as the Netherlands and Belgium) have long traditions in installing strip flooring. Strip flooring, pretty similar to lamparquet, is mainly used to create perfectly smooth pattern flooring. Traditionally this typical artisan product was mainly used to create custom made, complicated patterns, also called ‘art parquet’. The product was then supplied with square edges, glued and nailed to a wooden subfloor, filled & sanded and then finished on site. In the course of time, the range in dimensions of the single wood pieces has grown vastly. Nowadays we supply strip flooring for both patterns and parallel installations in widths up to 220 mm! Strip flooring can even be supplied with bevels (GO2/GO4) and prefinished. Minor height differences and tiny holes caused by the micro brats are taken for granted and are an integral part of the look and feel. WOODlife supplies strip flooring in 6.5 mm only in oak, ash, walnut. The most common sizes for herringbones are: 70 x 350 mm 90 x 450 mm 140 x 700 mm 180 x 720/900 mm


16

7 WOODlife approved import & partner productions Next to flooring products from our own production, we have close cooperations and partner productions throughout Eastern and Western Europe. Consequently we can offer almost anything. All our sourced products meet the WOODlife standards in order to offer you SAFETY: high product quality, realistic planning, reliable delivery, proper after sales & product warranties. 7.1 TRADITIONAL SOLID HERRINGBONES

We supply high quality block parquet. The most popular sizes are: 15 x 50 x 400/500 mm 15 x 70 x 350 mm 15 x 100 x 500 mm 7.2 REGULAR SOLID FLOORBOARDS

Solid oak floorboards in 10, 15 and 20 mm thickness. Solid oak can both be supplied unfinished or prefinished. We develop custom made, private label floor concepts. 7.3 INDUSTRIAL & MOSAIC PARQUET

Industrial parquet and mosaic parquet in numerous species. Industrial parquet both in 10 and 22 mm thickness. Mosaic parquet in parallel, English, herringbone and chess pattern. 7.4 WOODLIFE SMART PARQUET

Our Smart Parquet is an engineered product, made 100% out of FSC-certified oak material. This engineered floor can be supplied with a 4 or 6 mm top layer on top of a 7 mm oak back layer. Optionally, an exterior birch plywood can be chosen as a backing. This product comes both prefinished (oiled or UV-lacquered) or unfinished. The fitting is so smooth, that one can even install a lacquered herringbone with square edges. Available in oak, ash, iroko and doussie. Sizes available: 70x490 mm 100x1000 mm 120x1200 mm (120 x 600 mm on request) 7.5 WOODLIFE BIG FLOORING

Since we do not produce our own multiplanks any wider than 300 mm nor any longer than 4000 mm, we have a German partner production that custom produces anything bigger than that. The product basics is a three-layer product with a 5 mm top layer, a 9 mm middle layer and a 5 mm backing.


17

Optional: stainless steel anti-slip strips

8 Complementary products

8.1 STAIR STEPS

Comp A: engineered stair step Comp B: solid stair nose Comp C: engineered vertical panel 21 mm 2-layer semi-finished stair steps Top layer: 6 mm European oak Bottom layer: 15 mm Russian birch

exterior plywood. Size: 21x300 mm Length: 1220 mm Tongued on one (1) side Holes filled and sanded. Surface: sanded. Bevel: square edge Moisture content: KD 7-9%. Grading: Select/Nature

Solid oak stair nose 40x40 mm Size: 40x40x1230 mm Grooved on 2 sides Moisture content: KD 7-9% Grading: Select Surface: planed

16 mm 2-layer semi-finished panel Top layer: 4 mm European oak Bottom layer: 12 mm Russian birch

exterior plywood. Size: 16x180x1220 mm Tongued on one (1) side Holes filled and sanded. Surface: sanded. Bevel: square bevel Moisture content: KD 7-9%. Grading: Select/Nature

NB: Component A&B are glued together as a standard. Component C is not shown in the images above and is installed at the job site

8.2 SOLID OAK SKIRTING

Thickness Heigth Model

5 mm 28 mm 1

15 mm 45 mm 3

15 mm 70 mm 2

15 mm 100 mm 3

20 mm 120 mm 4

All skirting is of Select/Nature grade. Random lengths 1500-2400 mm Skirting in ash, elm, walnut and douglas on request If you like, we can even finish our oak skirting in the same way as your floor for a perfect, smooth match.

8.3 MARQUETRY LINES Marquetry lines are custom made in oak, core smoked oak, black walnut and ash. Available in: 6.5 mm solid (strip flooring), 16 mm engineered 21 mm engineered in widths of 10, 15 or 20 mm.


18

8.4 CUBES & COLUMS Wooden cubes add spice to any space or room. Next to a decorative function (they’re great eye catchers), they can be used as side table, coffee table, stool, you name it! As single pieces, or grouped together, anything goes. Our solid oak cubes are cut from big, large diameter oak trees from Baltic forests. Most of these trees are over 100 years old! The cubes can either be supplied sanded & unfinished, or factory finished in any style. Additionally we can install a set of 4 parquet friendly, sunken wheels.

Wood specie: European oak (Quercus petraea) Size: 40 x 40 x 40 cm Moisture: fresh cut wood Surface: sanded grain 120 Weight: app 50 kg.

Please note that the oak cube will show cracks in course of time due to drying. The intensity of cracking can increase during the years. Reclaimed sticker cubes During the production of top layers for our engineered wooden flooring, the fresh cut top layers are stacked on stickers before they are dried in our own kilns (heated on waste wood). Periodically these stickers need to be replaced. Instead of burning the stickers in our own oven, we’d rather turn them into these trendy floor accessories! A set of 4 parquet friendly, sunken wheels is optional.

Wood specie: misc. woods Moisture content: KD 8-10% Surface: rough Available sizes: 40 x 40 x 40 cm, 30 x 30 x 75 cm or 30 x 30 x 100 cm.

8.5 INSTALLATION A quality floors deserves to be installed with quality products, especially in challenging climatic or project-specific conditions. WOODlife offers a 25-year product warranty, even over under floor heating (UFH). In order to provide a warranty on our products over UFH, we need to be sure that certain installation methods and products are used. Therefore, the use of the below products is mandatory in case of UFH:

1. WOODlife PE90: permanent hard elastic SMP parquet adhesive (Bucket 15 kg) 2. Fidbox: an electronic monitoring system that measures relative humidity and temperature over time.

3.

For more information, we refer to our brochure ‘Subfloor heating’.


19

9 Marketing materials Basic floor stand 10 items, prefinished 1,0 x 1,0 meter, 2 large & 8 small gaps

Luxury floor stand 16 items, prefinished 2,0 x 1,0 meter, 2 large & 14 small gaps

Separate show panels sizes according to your wishes

Hand samples 30 cm long, other sizes upon request

Architect sample kit contains 18 colour samples & 2 pieces of engineered flooring

Showroom flooring 50% discount Goodies Free block notes, pens, tape, flyers, stickers Counter sampling your reference sample is offered as a free service. When sending out hand samples, we always invoice shipping cost. All WOODlife dealers are allowed to use our cloud based clients area. This allows WOODlife partners to access brochures, product declarations, project and picture references from any computer, tablet or cell phone. Reference pictures and – projects are exposed on different online social media and architectural forums, such as:

FACEBOOK > TWITTER > PINTEREST > ARCHELLO > MODENUS

10 Finishing & maintenance We offer several surface structures and finishings, such as: Brushing Smooth planing Hand planing Band sawing Aging (drumming) Customized bevels (GO2, GO4, U-bevels, hand scraped bevels) Surface smoking Core smoking* Staining Oxidative lacquering Oxidative oiling (1 coat and 2 coat systems)

* Core smoking is a time consuming process and takes app 4-6 weeks.

https://www.facebook.com/woodlifefloors

https://twitter.com/woodlifefloors

http://www.pinterest.com/woodlife/woodlife-flooring/

http://www.archello.com/en/company/woodlife-flooring

http://www.modenus.com/catalog/m/woodlife-flooring


20

We use several types of (Hardwax) oils, yet prefer to work with Saicos Hardwax oils. All our own finishings have a final coat of Saicos matt or ultra matt Hardwax oil for optimal protection. For UV-cured finishings, we have a cooperation with a highly specialized, Dutch finishing factory. Except for our exclusive Through-and-through Collections which are based on core smoked oak and bog oak, WOODlife does not offer standard floor collections, since each country has it’s own trends and characteristics. Each WOODlife partner chooses their own finishings from our list of finishings available.

Duotop System Saicos offers a unique Duotop System. The ground coat consists of a natural oil or colour oil. The second coat can be chosen: Hardwax oil or lacquer (1C). We can also apply the ground coat only. This enable clients to finish on site with Saicos Hardwax oil or Saicos 2C lacquer system for improved resistance.

Fire resistance The European fire regulations on wooden flooring are described in norm EN-13501-1 (the Euroclasses). WOODlife’s 21 mm engineered oak floorboards finished with the Rubio Monocoat Flamaway System, are granted a European Bfl-s1 class certificate according to the EN-13501-1 norm. Our oak engineered flooring can therefore easily be used in escape routes and in bed- or hotel rooms.

Maintenance products

WOODlife Parquet Cleaner 1 liter WOODlife Maintenance Oil 1 liter, available in White, Natural and Worn. Humidifiers

For maintenance guidelines we refer to our brochure ‘Maintenance of oiled floors’.


21

Statoil Swedbank

Sparebanken Vest Cartier

Hyatt Regency Simon Escapes

Hotel Continental The Music Factory

Eyeworks DAS Insurances

Masters of Luxury Peak Performance

Amsterdam Theatre Cornwall Golf Club

Documents

WOODlife Flooring - brochure unfinished flooring 2015