Wood Chippers - Great Plains · Ref. Part No. Part Description Comments Revision Dwg 35179 Drawing Image Number 1. 328-061H HOUSING, UPPER ROTOR 1. 328-061H81 HOUSING, UPPER ROTOR

Wood ChippersWC1503

35115 328-085PParts Manual

Read the Operator's Manual entirely. Whenyou see this symbol, the subsequentinstructions and warnings are serious - followwithout exception.Your life and the lives ofothers depend on it!

© Copyright 2019 Printed 12/17/19

Cover photo may show optional equipment notsupplied with standard unit.

Table of Contents Part Number Index

Section 1: Introduction.................................................4Using This Manual...............................................................4Manual Replacement Information.......................................4Manual Revisions................................................................4Touch-up Paint....................................................................4Hardware Legend................................................................5Replacement Hardware......................................................5Serial Numbers...................................................................5Part Number Service Coding..............................................5

Section 2: Frame & Chute Components......................6Discharge Chute Components............................................6Frame & Feed Chute Components S/N 795870-................8Frame & Feed Chute Components S/N 795871+.............10Manual Tube......................................................................12

Section 3: Drive Components....................................14Chipper Input Drive Components......................................14Chipper Output Drive Components...................................16Driveline (826-767C) Comer.............................................18

Section 4: Decals.........................................................20Decal Placement...............................................................20Touch-up Paints - LP.........................................................22

Part Number Index.......................................................24

© Copyright 2019. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied.While every precaution has been taken in the preparation of this manual,Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. LandPride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflectthe product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended forordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

2 WC1503 Wood Chippers 328-085P 12/17/19


Table of Contents

CChipper Input Drive Components.................................14Chipper Output Drive Components..............................16

DDecal Placement..........................................................20Discharge Chute Components.......................................6Driveline (826-767C) Comer........................................18

FFrame & Feed Chute Components S/N 795870-...........8Frame & Feed Chute Components S/N 795871+........10

MManual Tube.................................................................12

TTouch-up Paints - LP....................................................22


Alphabetized Table of Contents

12/17/19 WC1503 Wood Chippers 328-085P 3





35179


Table of Contents Part Number IndexLand Pride Section 2: Frame & Chute Components

Discharge Chute Components

Applies to WC1503

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image NumberDwg 35179HOUSING, UPPER ROTOR328-061H1.HOUSING, UPPER ROTOR GREEN328-061H811.HOUSING, UPPER ROTOR ORANGE328-061H821.DISHCHARGE CHUTE WLDMT328-062H2.ROTATION CHUTE LOCK WLDMT328-064H3.STRAP LOCKING328-166D4.DEFLECTOR, CHUTE328-174D5.SPACER FRONT HALF RING328-177D6.SPACER REAR HALF RING328-178D7.CLAMP LOWER CHUTE FRONT328-179D8.CLAMP LOWER CHUTE REAR328-180D9.HHCS 1/4-20X3/4 GR5802-004C10.HHCS 1/4-20X1 GR5802-005C11.

S/N 935682+HHCS 3/8-16X4 1/4 GR5802-750C12.S/N 935681-HHCS 3/8-16X1 GR5802-017C12.

RHSNB 3/8-16X3/4 GR5802-149C13.HFSS 3/8-16X3/4 LG802-185C14.NUT LOCK 3/8-16 PLT803-013C15.NUT LOCK 1/4-20 PLT803-007C16.NUT,3/8-16 PLT REGULAR ACORN803-380C17.KNOB 3/8-16 FEMALE THD 2 3/8OD817-259C18.UHMW CHUTE BEARING817-986C19.


Table of Contents Part Number IndexSection 2: Frame & Chute Components Land Pride

Discharge Chute Components

Applies to WC1503

35116



Frame & Feed Chute Components S/N 795870-

Applies to WC1503


Drawing Image Numberdwg35116SPACER 1 1/4OD X 13/16ID X 2LG308-400D1.FRAME LOWER WLDMT328-057H2.FRAME LOWER WLDMT GREEN328-057H812.FRAME LOWER WLDMT ORANGE328-057H822.PULLEY SHROUD328-060H3.PULLEY SHROUD GREEN328-060H813.PULLEY SHROUD ORANGE328-060H823.FEED CHUTE WLDMT 3"328-065H4.FEED CHUTE WLDMT 3" GREEN328-065H814.FEED CHUTE WLDMT 3" ORANGE328-065H824.SKID EXTENSION328-078H5.SHIM KIT REAR INLET328-102A6.HOLD DOWN STRAP328-191D7.SHIM .187 LH REAR INLET328-283D8.SHIM .134 LH REAR INLET328-284D9.SHIM .075 LH REAR INLET328-285D10.SHIM .187 RH REAR INLET328-286D11.SHIM .134 RH REAR INLET328-287D12.SHIM .075 RH REAR INLET328-288D13.RHSNB 1/4-20X3/4 GR5802-002C14.HHCS 1/4-20X3/4 GR5802-004C15.HHCS 3/4-10X3 3/4 GR5802-204C16.HHCS 1/2-13X1 GR5802-258C17.HFS 5/16-18X3/4 GR5802-387C18.HFSS 5/16-18X1 GR5 PLT802-431C19.NUT HEX 3/4-10 PLT803-027C20.NUT HEX 7/8-14 PLT803-149C21.NUT HEX FLG LOCK 1/2-13 PLT803-169C22.NUT HEX NYLOCK 1/4-20803-255C23.WASHER FLAT 1/4 SAE PLT804-007C24.WASHER LOCK SPRING 3/4 PLT804-023C25.WASHER LOCK SPRING 7/8 PLT804-037C26.PIN HTCH C1 7/8-14 THD W/N805-111C27.PIN DRAW 7/8 X 5N/A28.MANUAL STORAGE CONTAINER816-504C29.RUBBER FLAP816-699C30.



Frame & Feed Chute Components S/N 795870-

Applies to WC1503

35467



Frame & Feed Chute Components S/N 795871+

Applies to WC1503


Drawing Image NumberDwg 35467SPACER 1 1/4OD X 13/16ID X 2LG308-400D1.MANUAL CONTAINER KIT, 3/4"326-283S2.FRAME LOWER WLDMT328-057H3.FRAME LOWER WLDMT GREEN328-057H813.FRAME LOWER WLDMT ORANGE328-057H823.PULLEY SHROUD328-060H4.PULLEY SHROUD GREEN328-060H814.PULLEY SHROUD ORANGE328-060H824.SKID EXTENSION328-078H5.FEED CHUTE WLDMT 3"328-103H6.FEED CHUTE WLDMT 3" GREEN328-103H816.FEED CHUTE WLDMT 3" ORANGE328-103H826.HOLD DOWN STRAP328-191D7.

S/N _______+SMV MOUNT BRACKET328-336D8.RHSNB 1/4-20X3/4 GR5802-002C9.

S/N _______+RHSNB 5/16-18X3/4 GR5802-092C10.HHCS 3/4-10X3 3/4 GR5802-204C11.HHCS 1/2-13X1 GR5802-258C12.HFS 5/16-18X3/4 GR5802-387C13.NUT HEX 3/4-10 PLT803-027C14.NUT HEX WHIZ 1/2-13 PLT GR5803-037C15.NUT HEX 7/8-14 PLT803-149C16.

S/N _______+NUT HEX FLG TP LK 5/16-18ZNYCR803-177C17.NUT HEX NYLOCK 1/4-20803-255C18.WASHER FLAT 5/16 USS PLT804-010C19.WASHER LOCK SPRING 3/4 PLT804-023C20.WASHER FLAT 7/8 SAE PLT804-026C21.WASHER LOCK SPRING 7/8 PLT804-037C22.PIN HTCH C1 7/8-14 THD W/N805-111C23.PIN HTCH C1 7/8-14 THDN/A24.RUBBER FLAP816-699C25.

S/N _______+SMV MOUNTING SOCKET890-401C26.



Frame & Feed Chute Components S/N 795871+

Applies to WC1503

39163



Manual Tube

Applies to WC1503


Image No.Dwg 39163MANUAL CONTAINER KIT, 3/4"326-283S*HHCS 1/4-20X3/4 GR5802-004C1.NUT HEX NYLOCK 1/4-20803-255C2.WASHER FLAT 1/4 SAE PLT804-007C3.MANUAL STORAGE CONTAINER816-504C4.



Manual Tube

Applies to WC1503

35180


Table of Contents Part Number IndexLand Pride Section 3: Drive Components

Chipper Input Drive Components

Applies to WC1503


Drawing Image Numberdwg35180KEY 5/16 X 1 1/4 LONG314-099D1.IDLER ARM WLDMT328-058H2.IDLER ARM ASY328-059S3.KEY RECT 1/2 X 3/8 X 1" LG328-145D4.INPUT SHIELD328-169D5.GREASE ZERK STRAIGHT 1/4-28800-001C6.GREASE ZERK 1/4-28 THD FORMING800-080C7.GREASE ZERK STRAIGHT 1/8-27NPT800-130C8.GREASE ADAPT 1/4-28M X 1/4 TB800-211C9.FTG TUBE, PUSH CONNECT 1/8NPT800-372C10.SCR HEX SCKT. 5/16-24 X 5/16801-027C11.HHCS 3/8-16X1 GR5802-017C12.HHCS 5/8-11X1 1/2 GR5802-051C13.HHCS 3/8-16X1 1/4 GR5802-079C14.HHCS 1/2-13X1 GR5802-258C15.HHCS 1/4-20X1/2 GR5802-301C16.CLOSED EYE BOLT 3/8-16X4 1/2802-674C17.NUT LOCK 1/4-20 PLT803-007C18.NUT HEX FLANGE 3/8-16 PLT803-068C19.NUT HEX FLANGE 5/8-11 PLT803-196C20.WASHER FLAT 3/8 USS PLT804-011C21.WASHER LOCK SPRING 1/2 PLT804-015C22.WASHER FLAT 1/2 SAE PLT804-016C23.SPRING EXT 1.00OD .148W 6.50L807-272C24.BSHG, Q1 SPLIT TAPER808-445C25.PULLEY, 2TB160 SHEAVE808-447C26.DRIVE SHAFT 1 3/8-6 W/KEYWAY815-391C27.V-BELT, B-SEC. 59 PL (PAIR)816-737C28.BELT TENSIONER 2BELT UHMW817-950C29.BRG, 1.00IDX2.046ODX.59SEAL822-257C30.BRG, FLG 1 3/8ID 2 BOLT822-275C31.DRIVELINE 540,1700NM SHEARBOLT826-767C32.

1 FT. Sold per FootTUBE NYLON 1/4OD X 062WL990-109R33.V-BELT, B-SEC. 59 PLN/A34.CO BOLT & NUT M8X50 CL.8.8165.000.50535.


Table of Contents Part Number IndexSection 3: Drive Components Land Pride

Chipper Input Drive Components

Applies to WC1503

35181



Chipper Output Drive Components

Applies to WC1503


Drawing Image Numberdwg35181KEY 1/4 X 1/4 X 1 1/4 LG168-276D1.ROTOR WLDMT328-055H2.ROTOR W/KNIVES328-056S3.

Service PartKNIVE/BOLT KIT328-106A4.KEY RECT 3/8 X 5/16 X 3/4 LG328-144D5.GREASE ZERK STRAIGHT 1/4-28800-001C6.SCR HEX SCKT. 5/16-24 X 5/16801-027C7.HHCS 5/8-11X1 1/2 GR5802-051C8.HHCS 5/16-18X1 GR5802-159C9.HHCS 3/8-24X5/8 G8 PLT THD-LCK802-961C10.NUT HEX FLANGE 5/8-11 PLT803-196C11.WASHER FLAT 3/8 USS PLT804-011C12.BSHG, P1 SPLIT TAPER808-444C13.PULLEY, 2TB42 SHEAVE808-446C14.KNIFE REVERSIBLE - 17.5 ROTOR820-472C15.KNIFE, LEDGER 3"820-476C16.BRG, FLG 1 1/4ID 2 BOLT822-274C17.



Chipper Output Drive Components

Applies to WC1503

35226



Driveline (826-767C) Comer

Applies to WC1503


Drawing Image NumberDwg 35226DRIVELINE 540,1700NM SHEARBOLT826-767C*

ObsoleteRPBY 141.024.430.1141.024.4301.CO CROSS JOURNAL SET180.014.1302.CO OUTER YOKE W/LABEL151.014.0063.CO ROLL PIN FOR OUTER TUBE190.000.0144.CO OUTER TUBE152.140.29207105.CO INNER TUBE153.140.2006.CO ROLL PIN FOR INNER TUBE190.000.0127.CO INNER YOKE151.014.0078.CO YOKE W/SHEAR BLT B02(55XM8)143.240.0019.CO GRD COLLER OUTER TUBE180.014.23310.COMER BOLT180.014.24011.CO GRD COLLER INNER180.014.23212.CO SAFETY CHAINS180.016.63613.CO COMPLETE GUARD142.240.377742114.COMER OUTER CIRCLIP190.000.45115.COMER SLIDING SLEEVE COLLER151.016.48616.COMER SPRING180.016.48717.COMER FIXED SLEEVE180.016.48318.COMER BALL 1/2"190.000.07819.CO YOKE FOR HUB B02 (55XM8)151.014.01220.CO BALL DIA 1/4"190.000.02221.COMER PUSH PIN SET 1 3/8166.026.00422.CO HUB B02 (55XM8)141.024.01323.CO BOLT & NUT M8X50 CL.8.8165.000.50524.COMER GREASE FITTING190.000.02025.CO U-JOINT W/YOKES FOR OUTR TB121.024.756.1026.CO U-JOINT W/YOKES FOR INNR TB121.024.510.1027.CO HALF FEMALE GUARD142.246.096742128.CO HALF MALE SHIELD142.241.251742129.CO HALF FEMALE SHAFT W/GUARD123.340.364.1130.CO HALF MALE SFT W/GUARDING123.440.055.1131.COMER DANGER LABEL OUTER TUBE190.000.09832.COMER DANGER LABEL GUARD OUTER190.000.09933.COMER COLLOR KIT 1-3/8 YOKE165.000.62834.



Driveline (826-767C) Comer

Applies to WC1503

35182


Table of Contents Part Number IndexLand Pride Section 4: Decals

Decal Placement

Applies to WC1503


Drawing Image NumberDwg 35182DECAL WARNING 540 RPM818-130C1.

Decal location moved to the chutewith rev. F of decal

DECAL DANGER THROWN OBJECT HAZ818-132C2.

DECAL FLAG818-190C3.DECAL WARNING MOVING PARTS HAZ818-205C4.DECAL MOVING PARTS DANGER818-522C5.

Located behind guardDECAL DANGER PD GUARD MISS SML818-543C6.DECAL SHARP OBJ HAZARD DISCS838-093C7.DECAL DANGER MOVING PARTS838-111C8.DECAL WARNING READ MANUAL838-293C9.RPBY 838-293C818-858C9.DECAL QUICK HITCH SYSTEM838-517C10.

Beige UnitRPBY 838-962C818-891C11.Green & Orange UnitDECAL LP 13" W/TREE BROWN/GOLD838-962C11.Beige UnitRPBY 838-963C818-890C12.Green & Orange UnitDECAL LP 10" W/TREE BROWN/GOLD838-963C12.Located behind guardDECAL DANGER GUARD MISSING848-088C13.

DECAL DANGER ROTATING IMPELLER848-840C14.DECAL WC1503 GOLD848-916C15.

ObsoleteRPBY 848-916C848-917C15.DECAL DRIVELINE 826-767C848-969C16.

S/N 819231+DECAL REFLECTOR RED 2X4.5858-095C17.S/N 846945+DECAL, WARNING FLYING OBJECTS858-190C18.S/N 846944-RPBY 858-190C858-107C18.


Table of Contents Part Number IndexSection 4: Decals Land Pride

Decal Placement

Applies to WC1503

No diagram associated with this Parts List


Table of Contents Part Number IndexLand Pride Section 4: Decals

Touch-up Paints - LP

Applies to WC1503


Spray canLP BEIGE SPRAY CAN821-011C1.Touch-up bottle with brushLP BEIGE TOUCH-UP 5OZ821-011CTU1.Quart canLP BEIGE QUART821-011CQT1.Gallon canLP BEIGE GALLON821-011CGL1.Spray canGLOSS BLACK SPRAY CAN821-070C2.Touch-up bottle with brushGLOSS BLACK TOUCH-UP 5OZ821-070CTU2.Quart canGLOSS BLACK QUART821-070CQT2.Gallon canGLOSS BLACK GALLON821-070CGL2.Spray canMED. RED SPRAY TRCK/CTR821-054C3.Touch-up bottle with brushMED RED TOUCH-UP 5OZ821-054CTU3.Quart canMED RED QUART821-054CQT3.Gallon canMED RED GALLON821-054CGL3.Spray canGREEN SPRAY CUTTERS821-058C4.Touch-up bottle with brushGREEN TOUCH-UP 5OZ821-058CTU4.Quart canGREEN QUART821-058CQT4.Gallon canGREEN GALLON821-058CGL4.Spray canORANGE SPRAY CAN821-066C5.Touch-up bottle with brushORANGE TOUCH-UP 5OZ821-066CTU5.Quart canORANGE QUART821-066CQT5.Gallon canORANGE GALLON821-066CGL5.Spray canBLUE SPRAY CAN821-067C6.Touch-up bottle with brushBLUE TOUCH-UP 5OZ821-067CTU6.Quart canBLUE QUART821-067CQT6.Gallon canBLUE GALLON821-067CGL6.Spray canPAINT ALUMINUM/ZINC SPRAY CAN821-080C7.Touch-up bottle with brushPAINT ALUMINUM/ZINC TOUCH UP821-080CTU7.Quart canPAINT ALUMINUM/ZINC QUART821-080CQT7.Gallon canPAINT ALUMINUM/ZINC GALLON821-080CGL7.


Table of Contents Part Number IndexSection 4: Decals Land Pride

Touch-up Paints - LP

Applies to WC1503

The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on.

PagePart Number

19121.024.510.10 .........19121.024.756.10 .........19123.340.364.11 .........19123.440.055.11 .........19141.024.013 ..............19141.024.430 ..............19142.240.3777421 ......19142.241.2517421 ......19142.246.0967421 ......19143.240.001 ..............19151.014.006 ..............19151.014.007 ..............19151.014.012 ..............19151.016.486 ..............19152.140.2920710 ......19153.140.200 ..............15, 19165.000.505 ..............19165.000.628 ..............19166.026.004 ..............17168-276D ...................19180.014.130 ..............19180.014.232 ..............19180.014.233 ..............19180.014.240 ..............19180.016.483 ..............19180.016.487 ..............19180.016.636 ..............19190.000.012 ..............19190.000.014 ..............19190.000.020 ..............19190.000.022 ..............19190.000.078 ..............19190.000.098 ..............19190.000.099 ..............19190.000.451 ..............9, 11308-400D ...................15314-099D ...................11, 13326-283S ...................17328-055H ...................17328-056S ...................9, 11328-057H ...................9, 11328-057H81 ...............9, 11328-057H82 ...............15328-058H ...................15328-059S ...................9, 11328-060H ...................9, 11328-060H81 ...............9, 11328-060H82 ...............7328-061H ...................7328-061H81 ...............7328-061H82 ...............7328-062H ...................7328-064H ...................9328-065H ...................9328-065H81 ...............9328-065H82 ...............9, 11328-078H ...................9328-102A ...................11328-103H ...................11328-103H81 ...............11328-103H82 ...............17328-106A ...................17328-144D ...................15328-145D ...................7328-166D ...................15328-169D ...................7328-174D ...................7328-177D ...................7328-178D ...................7328-179D ...................

PagePart Number

7328-180D ...................9, 11328-191D ...................9328-283D ...................9328-284D ...................9328-285D ...................9328-286D ...................9328-287D ...................9328-288D ...................11328-336D ...................15, 17800-001C ...................15800-080C ...................15800-130C ...................15800-211C ...................15800-372C ...................15, 17801-027C ...................9, 11802-002C ...................7, 9, 13802-004C ...................7802-005C ...................7, 15802-017C ...................15, 17802-051C ...................15802-079C ...................11802-092C ...................7802-149C ...................17802-159C ...................7802-185C ...................9, 11802-204C ...................9, 11, 15802-258C ...................15802-301C ...................9, 11802-387C ...................9802-431C ...................15802-674C ...................7802-750C ...................17802-961C ...................7, 15803-007C ...................7803-013C ...................9, 11803-027C ...................11803-037C ...................15803-068C ...................9, 11803-149C ...................9803-169C ...................11803-177C ...................15, 17803-196C ...................9, 11, 13803-255C ...................7803-380C ...................9, 13804-007C ...................11804-010C ...................15, 17804-011C ...................15804-015C ...................15804-016C ...................9, 11804-023C ...................11804-026C ...................9, 11804-037C ...................9, 11805-111C ...................15807-272C ...................17808-444C ...................15808-445C ...................17808-446C ...................15808-447C ...................15815-391C ...................9, 13816-504C ...................9, 11816-699C ...................15816-737C ...................7817-259C ...................15817-950C ...................7817-986C ...................21818-130C ...................21818-132C ...................21818-190C ...................21818-205C ...................21818-522C ...................

PagePart Number

21818-543C ...................21818-858C ...................21818-890C ...................21818-891C ...................17820-472C ...................17820-476C ...................23821-011C ...................23821-011CGL ..............23821-011CQT ..............23821-011CTU ..............23821-054C ...................23821-054CGL ..............23821-054CQT ..............23821-054CTU ..............23821-058C ...................23821-058CGL ..............23821-058CQT ..............23821-058CTU ..............23821-066C ...................23821-066CGL ..............23821-066CQT ..............23821-066CTU ..............23821-067C ...................23821-067CGL ..............23821-067CQT ..............23821-067CTU ..............23821-070C ...................23821-070CGL ..............23821-070CQT ..............23821-070CTU ..............23821-080C ...................23821-080CGL ..............23821-080CQT ..............23821-080CTU ..............15822-257C ...................17822-274C ...................15822-275C ...................15, 19826-767C ...................21838-093C ...................21838-111C ...................21838-293C ...................21838-517C ...................21838-962C ...................21838-963C ...................21848-088C ...................21848-840C ...................21848-916C ...................21848-917C ...................21848-969C ...................21858-095C ...................21858-107C ...................21858-190C ...................11890-401C ...................15990-109R ...................7Dwg 35179 ................21Dwg 35182 ................19Dwg 35226 ................11Dwg 35467 ................13Dwg 39163 ................9dwg35116 ..................15dwg35180 ..................17dwg35181 ..................9, 11, 15N/A ............................



Part Number Index

This Page Intentionally Left Blank



Great Plains Manufacturing, Inc.Corporate Office: P.O. Box 5060

Salina, Kansas 67402-5060 USA

www.landpride.com

www.landpride.com

Documents

Wood Chippers - Great Plains · Ref. Part No. Part Description Comments Revision Dwg 35179 Drawing Image Number 1. 328-061H HOUSING, UPPER ROTOR 1. 328-061H81 HOUSING, UPPER ROTOR