Drilling

1HSS drilling

Solid carbide drilling

Reamers

Threading

2HSS taps

Circular and Thread Milling

Thread turning

Turning

3

Turning Tools

EcoCut

Grooving Tools

Miniature turning tools

Milling

4Solid Carbide milling cutters

Clamping

5

Material examples and article no. index

6

05|2

Overview

Table of contents

Collets Guide bushes

Premium quality tools for high performance.   The premium quality tools from the WNT Mastertool Performance product line have been designed for specific applications and are distinguished by their outstanding performance. If you make high demands on the performance of your production and want to achieve the very best results, we recommend the Premium tools in this product line.

Overview 2

Product programme 3–32

Technical Information 33

Collets for clamping the bar in the main spindle and for the sub-spindle

Ensures bar guidance in the main spindle

Stem collets Clamping sleeves

With an adapted stem for improved pick-up of the workpieces and for better secondary operation machinability

Mounting for bar feeder magazines

Other profile shapes and sizes and extended options available on request.

→ 3–11

→ 12–14

→ 15–24

→ 25–32

→

→ 25→

→

ClampingIntroduction

5

05|3

Highlights

Collets overview

Precision "Made in Germany" Reliable quality

Maximum radial run-out accuracies Reduces vibrations

Available with grooves Significantly increases clamping forces

All relevant surfaces are "precision-ground"

Increases component accuracy

Available in smooth bore version No marking of the workpiece

Norm Clamping diameter range in mm Profile Version Pages

116EØ 6,0 – 10,0 Grooved 4

Ø 1,0 – 10,0 Smooth 4

120EØ 6,0 – 12,0 Grooved 4

Ø 1,0 – 12,0 Smooth 4

F16Ø 1,0 – 13,0 Grooved 5

Ø 6,0 – 13,0 Smooth 5

136EØ 6,0 – 16,0 Grooved 6

Ø 1,0 – 16,0 Smooth 6

138EØ 6,0 – 16,0 Grooved 6

Ø 1,0 – 16,0 Smooth 6

145EØ 6,0 – 20,0 Grooved 7+8

Ø 1,5 – 20,0 Smooth 7+8

F37Ø 6,0 – 32,0 Grooved 9–11

Ø 1,0 – 32,0 Smooth 9–11

120E SW 2,0 – 11,0 Grooved* 4

138E SW 2,0 – 14,0 Grooved* 6

145E SW 2,0 – 19,0 Grooved* 7+8

F37 SW 3,0 – 27,0 Grooved* 9–11

145E SW 2,0 – 15,0 Grooved* 7+8

F37 SW 3,0 – 23,0 Grooved* 9–11

* Grooved from SW 8

Other profile shapes and sizes and extended options available on request.

Precision-ground surfaces

Perfectly tailored base material

Available with grooves and smooth bore versions

ClampingCollets – Content overview

05|4

ColletsDesignation d D A l L1 K°

DGUI DFC DCLC LCLC OAL

mm mm mm mm mm116 E / F 13 13 19 13 6 64 16120 E / F 15 15 21 15 6 64 16

l

dAD

K°

L1

d1

116 E / F 13

Grooved Smooth116 E / F 13 116 E / F 13

NEW NEW

d1 Article no. Article no.

DCONWS 81 000 ... 81 002 ...mm

1.0 8100201000

1.5 8100201500

2.0 8100202000

2.5 8100202500

3.0 8100203000

3.5 8100203500

4.0 8100204000

4.5 8100204500

5.0 8100205000

5.5 8100205500

6.0 8100006000 8100206000

6.5 8100006500 8100206500

7.0 8100007000 8100207000

7.5 8100007500 8100207500

8.0 8100008000 8100208000

8.5 8100008500 8100208500

9.0 8100009000 8100209000

9.5 8100009500 8100209500

10.0 8100010000 8100210000

120 E / F 15

Grooved Smooth Grooved120 E / F 15 120 E / F 15 120 E / F 15

NEW NEW NEW

d1 d1 Article no. Article no. Article no.

DCONWS 81 003 ... 81 005 ... 81 031 ...mm inch

1.000 81005010001.500 81005015002.000 8100502000 81031020001)

2.500 81005025003.000 8100503000 81031030001)

3.175 1/8 81031031751)

3.500 81005035004.000 8100504000 81031040001)

4.500 81005045005.000 8100505000 81031050001)

5.500 81005055006.000 8100306000 8100506000 81031060001)

6.350 1/4 81031063501)

6.500 8100306500 81005065007.000 8100307000 8100507000 81031070001)

7.500 8100307500 81005075008.000 8100308000 8100508000 81031080008.500 8100308500 81005085009.000 8100309000 8100509000 81031090009.500 810050950010.000 8100310000 8100510000 810311000010.500 8100310500 810051050011.000 8100311000 8100511000 810311100011.500 8100311500 810051150012.000 8100312000 8100512000

1) Without transverse grooves

ClampingCollets

5

05|5

ColletsDesignation d D A l L1 K°

DGUI DFC DCLC LCLC OAL

mm mm mm mm mmF 16 / 1212 E 16 21 16 6 64 16

l

dAD

K°

L1

d1

F 16 / 1212 E

Grooved SmoothF 16 / 1212 E F 16 / 1212 E

NEW NEW

d1 Article no. Article no.

DCONWS 81 019 ... 81 021 ...mm

1.0 8102101000

1.5 8102101500

2.0 8102102000

2.5 8102102500

3.0 8102103000

3.5 8102103500

4.0 8102104000

4.5 8102104500

5.0 8102105000

5.5 8102105500

6.0 8101906000 8102106000

6.5 8101906500 8102106500

7.0 8101907000 8102107000

7.5 8101907500 8102107500

8.0 8101908000 8102108000

8.5 8101908500 8102108500

9.0 8101909000 8102109000

9.5 8101909500 8102109500

10.0 8101910000 8102110000

10.5 8101910500 8102110500

11.0 8101911000 8102111000

11.5 8101911500 8102111500

12.0 8101912000 8102112000

12.5 8101912500 8102112500

13.0 8101913000 8102113000

ClampingCollets

05|6

ColletsDesignation d D A l L1 K°

DGUI DFC DCLC LCLC OAL

mm mm mm mm mm136 E / F 20-201 20 26 19 5 54 15138 E / F20-87 20 28 21 7 67 16

l

dAD

K°

L1

d1

136 E / F 20-201

Grooved Smooth136 E / F 20-201 136 E / F 20-201

NEW NEW

d1 Article no. Article no.

DCONWS 81 007 ... 81 009 ...mm

1.0 8100901000

1.5 8100901500

2.0 8100902000

2.5 8100902500

3.0 8100903000

3.5 8100903500

4.0 8100904000

4.5 8100904500

5.0 8100905000

5.5 8100905500

6.0 8100706000 8100906000

6.5 8100706500 8100906500

7.0 8100707000 8100907000

7.5 8100707500 8100907500

8.0 8100708000 8100908000

8.5 8100708500 8100908500

9.0 8100709000 8100909000

9.5 8100709500 8100909500

10.0 8100710000 8100910000

10.5 8100710500 8100910500

11.0 8100711000 8100911000

11.5 8100711500 8100911500

12.0 8100712000 8100912000

12.5 8100712500 8100912500

13.0 8100713000 8100913000

13.5 8100713500 8100913500

14.0 8100714000 8100914000

14.5 8100714500 8100914500

15.0 8100715000 8100915000

15.5 8100715500 8100915500

16.0 8100716000 8100916000

138 E / F20-87

Grooved Smooth Grooved138 E / F20-87 138 E / F20-87 138 E / F20-87

NEW NEW NEW

d1 d1 Article no. Article no. Article no.

DCONWS 81 011 ... 81 013 ... 81 026 ...mm inch1.00 81013010001.50 81013015002.00 8101302000 81026020001)

2.50 81013025003.00 8101303000 81026030001)

3.50 81013035004.00 8101304000 81026040001)

4.50 81013045005.00 8101305000 81026050001)

5.50 81013055006.00 8101106000 8101306000 81026060001)

6.35 1/4 81026063501)

6.50 8101106500 81013065007.00 8101107000 8101307000 81026070001)

7.50 8101107500 81013075008.00 8101108000 8101308000 81026080008.50 8101108500 81013085009.00 8101109000 8101309000 81026090009.50 8101109500 810130950010.00 8101110000 8101310000 810261000010.50 8101110500 810131050011.00 8101111000 8101311000 810261100011.50 8101111500 810131150012.00 8101112000 8101312000 810261200012.50 8101112500 810131250013.00 8101113000 8101313000 810261300013.50 8101113500 810131350014.00 8101114000 8101314000 810261400014.50 8101114500 810131450015.00 8101115000 810131500015.50 8101115500 810131550016.00 8101116000 8101316000

1) Without transverse grooves

ClampingCollets

5

05|7

ColletsDesignation d D A l L1 K°

DGUI DFC DCLC LCLC OAL

mm mm mm mm mm145 E / F 25 25 35 27 10 77 16

l

dAD

K°

L1

d1

145 E / F 25

Grooved Smooth Grooved Grooved145 E / F 25 145 E / F 25 145 E / F 25 145 E / F 25

NEW NEW NEW NEW

d1 d1 Article no. Article no. Article no. Article no.

DCONWS 81 015 ... 81 017 ... 81 027 ... 81 029 ...mm inch

1,500 81017015001,501 - 1,999 xxxxxxxxxx2)

2,000 8101702000 81027020001) 81029020001)

2,001 - 2,499 xxxxxxxxxx2)

2,500 81017025002,501 - 2,999 xxxxxxxxxx2)

3,000 8101703000 81027030001) 81029030001)

3,001 - 3,499 xxxxxxxxxx2)

3,500 81017035003,501 - 3,999 xxxxxxxxxx2)

4,000 8101704000 81027040001) 81029040001)

4,001 - 4,499 xxxxxxxxxx2)

4,500 81017045004,501 - 4,999 xxxxxxxxxx2)

5,000 8101705000 81027050001) 81029050001)

5,001 - 5,499 xxxxxxxxxx2)

5,500 81017055005,501 - 5,999 xxxxxxxxxx2)

6,000 8101506000 8101706000 81027060001) 81029060001)

6,001 - 6,349 xxxxxxxxxx2)

6,350 1/4 8101506350 8101706350 81027063501)

6,351 - 6,499 xxxxxxxxxx2)

6,500 8101506500 81017065006,501 - 6,999 xxxxxxxxxx2)

7,000 8101507000 8101707000 81027070001) 81029070001)

7,001 - 7,499 xxxxxxxxxx2)

7,500 8101507500 81017075007,501 - 7,937 xxxxxxxxxx2)

7,938 5/16 8101507938 81017079387,939 - 7,999 xxxxxxxxxx2)

8,000 8101508000 8101708000 8102708000 81029080008,001 - 8,499 xxxxxxxxxx2)

8,500 8101508500 81017085008,501 - 8,999 xxxxxxxxxx2)

9,000 8101509000 8101709000 8102709000 81029090009,001 - 9,499 xxxxxxxxxx2)

9,500 8101509500 81017095009,501 - 9,999 xxxxxxxxxx2)

10,000 8101510000 8101710000 8102710000 810291000010,001 - 10,499 xxxxxxxxxx2)

10,500 8101510500 810171050010,501 - 10,999 xxxxxxxxxx2)

11,000 8101511000 8101711000 8102711000 8102911000

1) Without transverse grooves

2) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 015 06789).

Continued on next page

ClampingCollets

05|8

145 E / F 25

Grooved Smooth Grooved Grooved145 E / F 25 145 E / F 25 145 E / F 25 145 E / F 25

NEW NEW NEW NEW

d1 d1 Article no. Article no. Article no. Article no.

DCONWS 81 015 ... 81 017 ... 81 027 ... 81 029 ...mm inch

11,001 - 11,112 xxxxxxxxxx2)

11,113 7/16 8101511113 810171111311,114 - 11,499 xxxxxxxxxx2)

11,500 8101511500 810171150011,501 - 11,999 xxxxxxxxxx2)

12,000 8101512000 8101712000 8102712000 810291200012,001 - 12,499 xxxxxxxxxx2)

12,500 8101512500 810171250012,501 - 12,699 xxxxxxxxxx2)

12,700 1/2 8101512700 8101712700 810271270012,701 - 12,999 xxxxxxxxxx2)

13,000 8101513000 8101713000 8102713000 810291300013,001 - 13,499 xxxxxxxxxx2)

13,500 8101513500 810171350013,501 - 13,999 xxxxxxxxxx2)

14,000 8101514000 8101714000 8102714000 810291400014,001 - 14,499 xxxxxxxxxx2)

14,500 8101514500 810171450014,501 - 14,999 xxxxxxxxxx2)

15,000 8101515000 8101715000 8102715000 810291500015,001 - 15,499 xxxxxxxxxx2)

15,500 8101515500 810171550015,501 - 15,999 xxxxxxxxxx2)

16,000 8101516000 8101716000 810271600016,001 - 16,499 xxxxxxxxxx2)

16,500 8101516500 810171650016,501 - 16,999 xxxxxxxxxx2)

17,000 8101517000 8101717000 810271700017,001 - 17,499 xxxxxxxxxx2)

17,500 8101517500 810171750017,501 - 17,999 xxxxxxxxxx2)

18,000 8101518000 8101718000 810271800018,001 - 18,499 xxxxxxxxxx2)

18,500 8101518500 810171850018,501 - 18,999 xxxxxxxxxx2)

19,000 8101519000 8101719000 810271900019,001 - 19,049 xxxxxxxxxx2)

19,050 3/4 810151905019,051 - 19,499 xxxxxxxxxx2)

19,500 8101519500 810171950019,501 - 19,999 xxxxxxxxxx2)

20,000 8101520000 8101720000

1) Without transverse grooves

2) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 015 06789).

ClampingCollets

5

05|9

ColletsDesignation d D A l L1 K°

DGUI DFC DCLC LCLC OAL

mm mm mm mm mmF 37 / 1536 E 37 47 40 10 92 16

l

dAD

K°

L1

d1

F 37 / 1536 E

Grooved Smooth Grooved GroovedF 37 / 1536 E F 37 / 1536 E F 37 / 1536 E F 37 / 1536 E

NEW NEW NEW NEW

d1 d1 Article no. Article no. Article no. Article no.

DCONWS 81 023 ... 81 025 ... 81 028 ... 81 030 ...mm inch

1,000 81025010001,001 - 1,499 xxxxxxxxxx2)

1,500 81025015001,501 - 1,999 xxxxxxxxxx2)

2,000 81025020002,001 - 2,499 xxxxxxxxxx2)

2,500 81025025002,501 - 2,999 xxxxxxxxxx2)

3,000 8102503000 81028030001) 81030030001)

3,001 - 3,499 xxxxxxxxxx2)

3,500 81025035003,501 - 3,999 xxxxxxxxxx2)

4,000 8102504000 81028040001) 81030040001)

4,001 - 4,499 xxxxxxxxxx2)

4,500 81025045004,501 - 4,999 xxxxxxxxxx2)

5,000 8102505000 81028050001) 81030050001)

5,001 - 5,499 xxxxxxxxxx2)

5,500 81025055005,501 - 5,999 xxxxxxxxxx2)

6,000 8102306000 8102506000 81028060001) 81030060001)

6,001 - 6,349 xxxxxxxxxx2)

6,350 1/4 8102306350 8102506350 81028063501) 81030063501)

6,351 - 6,499 xxxxxxxxxx2)

6,500 8102306500 81025065006,501 - 6,999 xxxxxxxxxx2)

7,000 8102307000 8102507000 81028070001) 81030070001)

7,001 - 7,499 xxxxxxxxxx2)

7,500 8102307500 81025075007,501 - 7,999 xxxxxxxxxx2)

8,000 8102308000 8102508000 8102808000 81030080008,001 - 8,499 xxxxxxxxxx2)

8,500 8102308500 81025085008,501 - 8,999 xxxxxxxxxx2)

9,000 8102309000 8102509000 8102809000 81030090009,001 - 9,499 xxxxxxxxxx2)

9,500 8102309500 81025095009,501 - 9,524 xxxxxxxxxx2)

9,525 3/8 81023095259,526 - 9,999 xxxxxxxxxx2)

10,000 8102310000 8102510000 8102810000 810301000010,001 - 10,499 xxxxxxxxxx2)

10,500 8102310500 8102510500

1) Without transverse grooves

2) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 023 06789).

Continued on next page

ClampingCollets

05|10

F 37 / 1536 E

Grooved Smooth Grooved GroovedF 37 / 1536 E F 37 / 1536 E F 37 / 1536 E F 37 / 1536 E

NEW NEW NEW NEW

d1 d1 Article no. Article no. Article no. Article no.

DCONWS 81 023 ... 81 025 ... 81 028 ... 81 030 ...mm inch

10,501 - 10,999 xxxxxxxxxx2)

11,000 8102311000 8102511000 8102811000 810301100011,001 - 11,499 xxxxxxxxxx2)

11,500 8102311500 810251150011,501 - 11,999 xxxxxxxxxx2)

12,000 8102312000 8102512000 8102812000 810301200012,001 - 12,499 xxxxxxxxxx2)

12,500 8102312500 810251250012,501 - 12,699 xxxxxxxxxx2)

12,700 1/2 8102312700 8102512700 8102812700 810301270012,701 - 12,999 xxxxxxxxxx2)

13,000 8102313000 8102513000 8102813000 810301300013,001 - 13,499 xxxxxxxxxx2)

13,500 8102313500 810251350013,501 - 13,999 xxxxxxxxxx2)

14,000 8102314000 8102514000 8102814000 810301400014,001 - 14,499 xxxxxxxxxx2)

14,500 8102314500 810251450014,501 - 14,999 xxxxxxxxxx2)

15,000 8102315000 8102515000 8102815000 810301500015,001 - 15,499 xxxxxxxxxx2)

15,500 8102315500 810251550015,501 - 15,999 xxxxxxxxxx2)

16,000 8102316000 8102516000 8102816000 810301600016,001 - 16,499 xxxxxxxxxx2)

16,500 8102316500 810251650016,501 - 16,999 xxxxxxxxxx2)

17,000 8102317000 8102517000 8102817000 810301700017,001 - 17,499 xxxxxxxxxx2)

17,500 8102317500 810251750017,501 - 17,999 xxxxxxxxxx2)

18,000 8102318000 8102518000 8102818000 810301800018,001 - 18,499 xxxxxxxxxx2)

18,500 8102318500 810251850018,501 - 18,999 xxxxxxxxxx2)

19,000 8102319000 8102519000 8102819000 810301900019,001 - 19,049 xxxxxxxxxx2)

19,050 3/4 8102319050 810251905019,051 - 19,499 xxxxxxxxxx2)

19,500 8102319500 810251950019,501 - 19,999 xxxxxxxxxx2)

20,000 8102320000 8102520000 8102820000 810302000020,001 - 20,499 xxxxxxxxxx2)

20,500 8102320500 810252050020,501 - 20,999 xxxxxxxxxx2)

21,000 8102321000 8102521000 8102821000 810302100021,001 - 21,499 xxxxxxxxxx2)

21,500 8102321500 810252150021,501 - 21,999 xxxxxxxxxx2)

22,000 8102322000 8102522000 8102822000 810302200022,001 - 22,224 xxxxxxxxxx2)

22,225 7/8 810232222522,226 - 22,499 xxxxxxxxxx2)

1) Without transverse grooves

2) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 023 06789).

Continued on next page

ClampingCollets

5

05|11

F 37 / 1536 E

Grooved Smooth Grooved GroovedF 37 / 1536 E F 37 / 1536 E F 37 / 1536 E F 37 / 1536 E

NEW NEW NEW NEW

d1 d1 Article no. Article no. Article no. Article no.

DCONWS 81 023 ... 81 025 ... 81 028 ... 81 030 ...mm inch

22,500 8102322500 810252250022,501 - 22,999 xxxxxxxxxx2)

23,000 8102323000 8102523000 8102823000 810302300023,001 - 23,499 xxxxxxxxxx2)

23,500 8102323500 810252350023,501 - 23,999 xxxxxxxxxx2)

24,000 8102324000 8102524000 810282400024,001 - 24,499 xxxxxxxxxx2)

24,500 8102324500 810252450024,501 - 24,999 xxxxxxxxxx2)

25,000 8102325000 8102525000 810282500025,001 - 25,499 xxxxxxxxxx2)

25,400 1/1 810282540025,500 8102325500 8102525500

25,501 - 25,999 xxxxxxxxxx2)

26,000 8102326000 8102526000 810282600026,001 - 26,499 xxxxxxxxxx2)

26,500 8102326500 810252650026,501 - 26,999 xxxxxxxxxx2)

27,000 8102327000 8102527000 810282700027,001 - 27,499 xxxxxxxxxx2)

27,500 8102327500 810252750027,501 - 27,999 xxxxxxxxxx2)

28,000 8102328000 810252800028,001 - 28,499 xxxxxxxxxx2)

28,500 8102328500 810252850028,501 - 28,999 xxxxxxxxxx2)

29,000 8102329000 810252900029,001 - 29,499 xxxxxxxxxx2)

29,500 8102329500 810252950029,501 - 29,999 xxxxxxxxxx2)

30,000 8102330000 810253000030,001 - 30,499 xxxxxxxxxx2)

30,500 8102330500 810253050030,501 - 30,999 xxxxxxxxxx2)

31,000 8102331000 810253100031,001 - 31,499 xxxxxxxxxx2)

31,500 8102331500 810253150031,501 - 31,999 xxxxxxxxxx2)

32,000 8102332000 8102532000

1) Without transverse grooves

2) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 023 06789).

ClampingCollets

05|12

Highlights

Stem collets overview

Precision "Made in Germany" Reliable quality

Available in increments of 1/100 Maximum flexibility

Smooth bore version No marking of the workpiece

All relevant surfaces are "precision-ground"

Increases component accuracy

Adapted stem Maximum stability with minimal risk of collisions

Norm Clamping diameter range in mm Profile Version Pages

116E Ø 1,0 – 8,0 Smooth 13

120E Ø 1,0 – 8,0 Smooth 13

F16 Ø 1,0 – 9,0 Smooth 13

138E Ø 1,0 – 12,0 Smooth 13

136E Ø 1,0 – 14,0 Smooth 14

145E Ø 1,0 – 20,0 Smooth 14

F37 Ø 1,0 – 28,0 Smooth 14

Other profile shapes and sizes and extended options available on request.

Optimally tailored base material

Precision-ground surfaces

Adapted stem

ClampingStem collets – Content overview

5

05|13

Stem colletsDesignation d D A l L1 K° l1

DGUI DFC DCLC LCLC OAL LFSF

mm mm mm mm mm mm116 E / F 13 13 19 13 12 70 16 6120 E / F 15 15 21 15 13 71 16 7120 E / F 15 15 21 15 15 73 16 9F 16 / 1212 E 16 21 16 13 71 16 7F 16 / 1212 E 16 21 16 15 73 16 9138 E / F20-87 20 28 21 15 78 16 8138 E / F20-87 20 28 21 20 80 16 13

dD A

l

K°

L1

d1

l1

116 E / F 13

Smooth116 E / F 13

NEW

d1 Article no.

DCONWS 81 001 ...mm

1 8100101000

2 8100102000

3 8100103000

4 8100104000

5 8100105000

6 8100106000

7 8100107000

120 E / F 15

Smooth Smooth120 E / F 15 120 E / F 15

l1 = 7 mm l1 = 9 mm

NEW NEW

d1 Article no. Article no.

DCONWS 81 004 ... 81 006 ...mm

1 8100401000 8100601000

2 8100402000 8100602000

3 8100403000 8100603000

4 8100404000 8100604000

5 8100405000 8100605000

6 8100406000 8100606000

7 8100407000 8100607000

8 8100408000 8100608000

F 16 / 1212 E

Smooth SmoothF 16 / 1212 E F 16 / 1212 E

l1 = 7 mm l1 = 9 mm

NEW NEW

d1 Article no. Article no.

DCONWS 81 020 ... 81 022 ...mm

1 8102001000 81022010002 8102002000 81022020003 8102003000 81022030004 8102004000 81022040005 8102005000 81022050006 8102006000 81022060007 8102007000 81022070008 8102008000 81022080009 8102009000 8102209000

138 E / F20-87

Smooth Smooth138 E / F20-87 138 E / F20-87

l1 = 8 mm l1 = 13 mm

NEW NEW

d1 Article no. Article no.

DCONWS 81 012 ... 81 014 ...mm

1 8101201000 81014010002 8101202000 81014020003 8101203000 81014030004 8101204000 81014040005 8101205000 81014050006 8101206000 81014060007 8101207000 81014070008 8101208000 81014080009 8101209000 810140900010 8101210000 810141000011 8101211000 810141100012 8101212000 8101412000

ClampingStem collets

05|14

Stem colletsDesignation d D A l L1 K° l1

DGUI DFC DCLC LCLC OAL LFSF

mm mm mm mm mm mm136 E / F 20-201 20 26 19 13 62 15 8136 E / F 20-201 20 26 19 15 64 15 10145 E / F 25 25 35 27 20 87 16 10145 E / F 25 25 35 27 25 92 16 15F 37 / 1536 E 37 47 40 25 107 16 15

dD A

l

K°

L1

d1

l1

136 E / F 20-201

Smooth Smooth136 E / F 20-201 136 E / F 20-201

l1 = 8 mm l1 = 10 mm

NEW NEW

d1 Article no. Article no.

DCONWS 81 008 ... 81 010 ...mm

1 8100801000 81010010002 8100802000 81010020003 8100803000 81010030004 8100804000 81010040005 8100805000 81010050006 8100806000 81010060007 8100807000 81010070008 8100808000 81010080009 8100809000 810100900010 8100810000 810101000011 8100811000 810101100012 8100812000 810101200013 810101300014 8101014000

145 E / F 25

Smooth Smooth145 E / F 25 145 E / F 25l1 = 10 mm l1 = 15 mm

NEW NEW

d1 Article no. Article no.

DCONWS 81 016 ... 81 018 ...mm

1 8101601000 81018010002 8101602000 81018020003 8101603000 81018030004 8101604000 81018040005 8101605000 81018050006 8101606000 81018060007 8101607000 81018070008 8101608000 81018080009 8101609000 810180900010 8101610000 810181000011 8101611000 810181100012 8101612000 810181200013 8101613000 810181300014 8101614000 810181400015 8101615000 810181500016 8101616000 810181600017 8101617000 810181700018 8101618000 810181800019 8101619000 810181900020 8101620000 8101820000

F 37 / 1536 E

SmoothF 37 / 1536 E

NEW

d1 Article no.

DCONWS 81 024 ...mm

1 8102401000

2 8102402000

3 8102403000

4 8102404000

5 8102405000

6 8102406000

7 8102407000

8 8102408000

9 8102409000

10 8102410000

11 8102411000

12 8102412000

13 8102413000

14 8102414000

15 8102415000

16 8102416000

17 8102417000

18 8102418000

19 8102419000

20 8102420000

21 8102421000

22 8102422000

23 8102423000

24 8102424000

25 8102425000

26 8102426000

27 8102427000

28 8102428000

ClampingStem collets

5

05|15

Highlights

Adjustable guide bushes overview

Precision "Made in Germany" Reliable quality

Industry standard with carbide pads Longer service life

Available in round, square or hexagonal versions Adapted to the material

All relevant surfaces are "precision-ground"

Increases component accuracy

Optimally adjustable according to the bar

Ensures maximum component accuracies

Norm Guide diameter range in mm Profile Version Pages

I353 Ø 1,0 – 10,5 Carbide insert 16

F853 Ø 1,0 – 13,0 Carbide insert 17

F391 Ø 1,0 – 18,0 Carbide insert 18

F605 Ø 1,0 – 17,0 Carbide insert 19

T223 Ø 1,0 – 22,0 Carbide insert 20

I357 Ø 2,0 – 22,0 Carbide insert 21

T227 Ø 1,0 – 25,0 Carbide insert 22

T229 Ø 2,0 – 32,0 Carbide insert 23

T223 SW 2,0 – 11,0 Carbide insert 20

T229 SW 2,0 – 14,0 Carbide insert 23

T223 SW 2,0 – 15,0 Carbide insert 20

Flexible GBE guide bushes overview

GBE 28 Ø 2,0 – 15,0 24

GBE 42 Ø 2,0 – 15,0 24

Other profile shapes and sizes and extended options available on request.

Can be milled No chip jamming

Precision-ground surfaces

Carbide guide pads

Maximum radial run-out accuracy

With integrated spring assembly

Protects against pressure marks

Maximum radial run-out accuracy

Produced from one piece

ClampingGuide bushes – Content overview

05|16

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm I 353 16 19.5 59 16 M14 x 1

K°

G dD

L1

d1

I 353 For Star* CNC sliding head lathes With carbide insert

I 353

NEW

d1 Article no.

DCONWS 81 035 ...mm

1.0 8103501000

1.5 8103501500

2.0 8103502000

2.5 8103502500

3.0 8103503000

3.5 8103503500

4.0 8103504000

4.5 8103504500

5.0 8103505000

5.5 8103505500

6.0 8103506000

6.5 8103506500

7.0 8103507000

7.5 8103507500

8.0 8103508000

8.5 8103508500

9.0 8103509000

9.5 8103509500

10.0 8103510000

10.5 8103510500

ClampingGuide bushes

5

05|17

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm F 853 18 22 60 30 M16 x 1

K°

G dD

L1

d1

F 853 With carbide insert

F 853

NEW

d1 Article no.

DCONWS 81 034 ...mm

1.0 8103401000

1.5 8103401500

2.0 8103402000

2.5 8103402500

3.0 8103403000

3.5 8103403500

4.0 8103404000

4.5 8103404500

5.0 8103405000

5.5 8103405500

6.0 8103406000

6.5 8103406500

7.0 8103407000

7.5 8103407500

8.0 8103408000

8.5 8103408500

9.0 8103409000

9.5 8103409500

10.0 8103410000

10.5 8103410500

11.0 8103411000

11.5 8103411500

12.0 8103412000

12.5 8103412500

13.0 8103413000

ClampingGuide bushes

05|18

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm F 391 22 29 68 16 M22 x 1

K°

G dD

L1

d1

F 391

NEW

d1 d1 Article no.

DCONWS 81 032 ...mm inch

1,000 81032010001,001 - 1,499 xxxxxxxxxx1)

1,500 81032015001,501 - 1,999 xxxxxxxxxx1)

2,000 81032020002,001 - 2,499 xxxxxxxxxx1)

2,500 81032025002,501 - 2,999 xxxxxxxxxx1)

3,000 81032030003,001 - 3,499 xxxxxxxxxx1)

3,500 81032035003,501 - 3,999 xxxxxxxxxx1)

4,000 81032040004,001 - 4,499 xxxxxxxxxx1)

4,500 81032045004,501 - 4,999 xxxxxxxxxx1)

5,000 81032050005,001 - 5,499 xxxxxxxxxx1)

5,500 81032055005,501 - 5,999 xxxxxxxxxx1)

6,000 81032060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81032063506,351 - 6,499 xxxxxxxxxx1)

6,500 81032065006,501 - 6,999 xxxxxxxxxx1)

7,000 81032070007,001 - 7,499 xxxxxxxxxx1)

7,500 81032075007,501 - 7,999 xxxxxxxxxx1)

8,000 81032080008,001 - 8,499 xxxxxxxxxx1)

8,500 81032085008,501 - 8,999 xxxxxxxxxx1)

9,000 81032090009,001 - 9,499 xxxxxxxxxx1)

9,500 81032095009,501 - 9,999 xxxxxxxxxx1)

10,000 810321000010,001 - 10,499 xxxxxxxxxx1)

10,500 810321050010,501 - 10,999 xxxxxxxxxx1)

11,000 810321100011,001 - 11,499 xxxxxxxxxx1)

11,500 810321150011,501 - 11,999 xxxxxxxxxx1)

12,000 8103212000

F 391 With carbide insert

NEW

d1 d1 Article no.

DCONWS 81 032 ...mm inch

12,001 - 12,499 xxxxxxxxxx1)

12,500 810321250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810321270012,701 - 12,999 xxxxxxxxxx1)

13,000 810321300013,001 - 13,499 xxxxxxxxxx1)

13,500 810321350013,501 - 13,999 xxxxxxxxxx1)

14,000 810321400014,001 - 14,499 xxxxxxxxxx1)

14,500 810321450014,501 - 14,999 xxxxxxxxxx1)

15,000 810321500015,001 - 15,499 xxxxxxxxxx1)

15,500 810321550015,501 - 15,999 xxxxxxxxxx1)

16,000 810321600016,001 - 16,499 xxxxxxxxxx1)

16,500 810321650016,501 - 16,999 xxxxxxxxxx1)

17,000 810321700017,001 - 17,499 xxxxxxxxxx1)

17,500 810321750017,501 - 17,999 xxxxxxxxxx1)

18,000 8103218000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 032 06789).

ClampingGuide bushes

5

05|19

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm F 605 24 29.5 61 30 M24 x 1

K°

G dD

L1

d1

F 605

NEW

d1 d1 Article no.

DCONWS 81 033 ...mm inch

1,000 81033010001,001 - 1,499 xxxxxxxxxx1)

1,500 81033015001,501 - 1,999 xxxxxxxxxx1)

2,000 81033020002,001 - 2,499 xxxxxxxxxx1)

2,500 81033025002,501 - 2,999 xxxxxxxxxx1)

3,000 81033030003,001 - 3,174 xxxxxxxxxx1)

3,175 1/8 81033031753,176 - 3,499 xxxxxxxxxx1)

3,500 81033035003,501 - 3,999 xxxxxxxxxx1)

4,000 81033040004,001 - 4,499 xxxxxxxxxx1)

4,500 81033045004,501 - 4,762 xxxxxxxxxx1)

4,763 3/16 81033047634,764 - 4,999 xxxxxxxxxx1)

5,000 81033050005,001 - 5,499 xxxxxxxxxx1)

5,500 81033055005,501 - 5,999 xxxxxxxxxx1)

6,000 81033060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81033063506,351 - 6,499 xxxxxxxxxx1)

6,500 81033065006,501 - 6,999 xxxxxxxxxx1)

7,000 81033070007,001 - 7,499 xxxxxxxxxx1)

7,500 81033075007,501 - 7,999 xxxxxxxxxx1)

8,000 81033080008,001 - 8,499 xxxxxxxxxx1)

8,500 81033085008,501 - 8,999 xxxxxxxxxx1)

9,000 81033090009,001 - 9,499 xxxxxxxxxx1)

9,500 81033095009,501 - 9,999 xxxxxxxxxx1)

10,000 810331000010,001 - 10,499 xxxxxxxxxx1)

10,500 810331050010,501 - 10,999 xxxxxxxxxx1)

11,000 8103311000

F 605 With carbide insert

NEW

d1 d1 Article no.

DCONWS 81 033 ...mm inch

11,001 - 11,499 xxxxxxxxxx1)

11,500 810331150011,501 - 11,999 xxxxxxxxxx1)

12,000 810331200012,001 - 12,499 xxxxxxxxxx1)

12,500 810331250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810331270012,701 - 12,999 xxxxxxxxxx1)

13,000 810331300013,001 - 13,499 xxxxxxxxxx1)

13,500 810331350013,501 - 13,999 xxxxxxxxxx1)

14,000 810331400014,001 - 14,499 xxxxxxxxxx1)

14,500 810331450014,501 - 14,999 xxxxxxxxxx1)

15,000 810331500015,001 - 15,499 xxxxxxxxxx1)

15,500 810331550015,501 - 15,999 xxxxxxxxxx1)

16,000 810331600016,001 - 16,499 xxxxxxxxxx1)

16,500 810331650016,501 - 16,999 xxxxxxxxxx1)

17,000 8103317000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 033 06789).

ClampingGuide bushes

05|20

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm T 223 28 34 82 16 M25 x 1

K°

G dD

L1

d1

T 223 T 223 T 223

NEW NEW NEW

d1 d1 Article no. Article no. Article no.

DCONWS 81 037 ... 81 038 ... 81 039 ...mm inch

1,000 81037010001,001 - 1,499 xxxxxxxxxx1)

1,500 81037015001,501 - 1,999 xxxxxxxxxx1)

2,000 81037020002,001 - 2,499 xxxxxxxxxx1)

2,500 81037025002,501 - 2,999 xxxxxxxxxx1)

3,000 8103703000 8103803000 81039030003,001 - 3,499 xxxxxxxxxx1)

3,500 81037035003,501 - 3,999 xxxxxxxxxx1)

4,000 8103704000 8103804000 81039040004,001 - 4,499 xxxxxxxxxx1)

4,500 81037045004,501 - 4,999 xxxxxxxxxx1)

5,000 8103705000 8103805000 81039050005,001 - 5,499 xxxxxxxxxx1)

5,500 81037055005,501 - 5,999 xxxxxxxxxx1)

6,000 8103706000 8103806000 81039060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8103706350 8103806350 81039063506,351 - 6,499 xxxxxxxxxx1)

6,500 81037065006,501 - 6,999 xxxxxxxxxx1)

7,000 8103707000 8103807000 81039070007,001 - 7,499 xxxxxxxxxx1)

7,500 81037075007,501 - 7,999 xxxxxxxxxx1)

7,938 5/16 81038079388,000 8103708000 8103808000 8103908000

8,001 - 8,499 xxxxxxxxxx1)

8,500 81037085008,501 - 8,999 xxxxxxxxxx1)

9,000 8103709000 8103809000 81039090009,001 - 9,499 xxxxxxxxxx1)

9,500 81037095009,501 - 9,999 xxxxxxxxxx1)

9,525 3/8 810380952510,000 8103710000 8103810000 8103910000

10,001 - 10,499 xxxxxxxxxx1)

10,500 810371050010,501 - 10,999 xxxxxxxxxx1)

11,000 8103711000 8103811000 810391100011,001 - 11,499 xxxxxxxxxx1)

11,500 8103711500

T 223 With carbide insert

NEW NEW NEW

d1 d1 Article no. Article no. Article no.

DCONWS 81 037 ... 81 038 ... 81 039 ...mm inch

11,501 - 11,999 xxxxxxxxxx1)

12,000 8103712000 8103812000 810391200012,001 - 12,499 xxxxxxxxxx1)

12,500 810371250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 8103712700 810381270012,701 - 12,999 xxxxxxxxxx1)

13,000 8103713000 8103813000 810391300013,001 - 13,499 xxxxxxxxxx1)

13,500 810371350013,501 - 13,999 xxxxxxxxxx1)

14,000 8103714000 8103814000 810391400014,001 - 14,499 xxxxxxxxxx1)

14,500 810371450014,501 - 14,999 xxxxxxxxxx1)

15,000 8103715000 810381500015,001 - 15,499 xxxxxxxxxx1)

15,500 810371550015,501 - 15,999 xxxxxxxxxx1)

16,000 8103716000 810381600016,001 - 16,499 xxxxxxxxxx1)

16,500 810371650016,501 - 16,999 xxxxxxxxxx1)

17,000 8103717000 810381700017,001 - 17,499 xxxxxxxxxx1)

17,500 810371750017,501 - 17,999 xxxxxxxxxx1)

18,000 810371800018,001 - 18,499 xxxxxxxxxx1)

18,500 810371850018,501 - 18,999 xxxxxxxxxx1)

19,000 810371900019,001 - 19,499 xxxxxxxxxx1)

19,500 810371950019,501 - 19,999 xxxxxxxxxx1)

20,000 810372000020,001 - 20,499 xxxxxxxxxx1)

20,500 810372050020,501 - 20,999 xxxxxxxxxx1)

21,000 810372100021,001 - 21,499 xxxxxxxxxx1)

21,500 810372150021,501 - 21,999 xxxxxxxxxx1)

22,000 8103722000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 037 06789).

ClampingGuide bushes

5

05|21

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm I 357 28 38 81 30 M25 x 1

K°

G dD

L1

d1

I 357

NEW

d1 d1 Article no.

DCONWS 81 036 ...mm inch

2,000 81036020002,001 - 2,499 xxxxxxxxxx1)

2,500 81036025002,501 - 2,999 xxxxxxxxxx1)

3,000 81036030003,001 - 3,174 xxxxxxxxxx1)

3,175 1/8 81036031753,176 - 3,499 xxxxxxxxxx1)

3,500 81036035003,501 - 3,999 xxxxxxxxxx1)

4,000 81036040004,001 - 4,499 xxxxxxxxxx1)

4,500 81036045004,501 - 4,999 xxxxxxxxxx1)

5,000 81036050005,001 - 5,499 xxxxxxxxxx1)

5,500 81036055005,501 - 5,999 xxxxxxxxxx1)

6,000 81036060006,001 - 6,499 xxxxxxxxxx1)

6,500 81036065006,501 - 6,999 xxxxxxxxxx1)

7,000 81036070007,001 - 7,143 xxxxxxxxxx1)

7,144 9/32 81036071447,145 - 7,499 xxxxxxxxxx1)

7,500 81036075007,501 - 7,999 xxxxxxxxxx1)

8,000 81036080008,001 - 8,499 xxxxxxxxxx1)

8,500 81036085008,501 - 8,999 xxxxxxxxxx1)

9,000 81036090009,001 - 9,499 xxxxxxxxxx1)

9,500 81036095009,501 - 9,999 xxxxxxxxxx1)

10,000 810361000010,001 - 10,499 xxxxxxxxxx1)

10,500 810361050010,501 - 10,999 xxxxxxxxxx1)

11,000 810361100011,001 - 11,499 xxxxxxxxxx1)

11,500 810361150011,501 - 11,999 xxxxxxxxxx1)

12,000 810361200012,001 - 12,499 xxxxxxxxxx1)

12,500 8103612500

I 357 With carbide insert

NEW

d1 d1 Article no.

DCONWS 81 036 ...mm inch

12,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810361270012,701 - 12,999 xxxxxxxxxx1)

13,000 810361300013,001 - 13,499 xxxxxxxxxx1)

13,500 810361350013,501 - 13,999 xxxxxxxxxx1)

14,000 810361400014,001 - 14,499 xxxxxxxxxx1)

14,500 810361450014,501 - 14,999 xxxxxxxxxx1)

15,000 810361500015,001 - 15,499 xxxxxxxxxx1)

15,500 810361550015,501 - 15,999 xxxxxxxxxx1)

16,000 810361600016,001 - 16,499 xxxxxxxxxx1)

16,500 810361650016,501 - 16,999 xxxxxxxxxx1)

17,000 810361700017,001 - 17,499 xxxxxxxxxx1)

17,500 810361750017,501 - 17,999 xxxxxxxxxx1)

18,000 810361800018,001 - 18,499 xxxxxxxxxx1)

18,500 810361850018,501 - 18,999 xxxxxxxxxx1)

19,000 810361900019,001 - 19,499 xxxxxxxxxx1)

19,500 810361950019,501 - 19,999 xxxxxxxxxx1)

20,000 810362000020,001 - 20,499 xxxxxxxxxx1)

20,500 810362050020,501 - 20,999 xxxxxxxxxx1)

21,000 810362100021,001 - 21,499 xxxxxxxxxx1)

21,500 810362150021,501 - 21,999 xxxxxxxxxx1)

22,000 8103622000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 036 06789).

ClampingGuide bushes

05|22

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm T 227 34 41 87.5 10 M34 x 1

K°

G dD

L1

d1

T 227

NEW

d1 d1 Article no.

DCONWS 81 040 ...mm inch

1,000 81040010001,001 - 1,499 xxxxxxxxxx1)

1,500 81040015001,501 - 1,999 xxxxxxxxxx1)

2,000 81040020002,001 - 2,499 xxxxxxxxxx1)

2,500 81040025002,501 - 2,999 xxxxxxxxxx1)

3,000 81040030003,001 - 3,499 xxxxxxxxxx1)

3,500 81040035003,501 - 3,999 xxxxxxxxxx1)

4,000 81040040004,001 - 4,499 xxxxxxxxxx1)

4,500 81040045004,501 - 4,999 xxxxxxxxxx1)

5,000 81040050005,001 - 5,499 xxxxxxxxxx1)

5,500 81040055005,501 - 5,999 xxxxxxxxxx1)

6,000 81040060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81040063506,351 - 6,499 xxxxxxxxxx1)

6,500 81040065006,501 - 6,999 xxxxxxxxxx1)

7,000 81040070007,001 - 7,499 xxxxxxxxxx1)

7,500 81040075007,501 - 7,999 xxxxxxxxxx1)

8,000 81040080008,001 - 8,499 xxxxxxxxxx1)

8,500 81040085008,501 - 8,999 xxxxxxxxxx1)

9,000 81040090009,001 - 9,499 xxxxxxxxxx1)

9,500 81040095009,501 - 9,999 xxxxxxxxxx1)

10,000 810401000010,001 - 10,499 xxxxxxxxxx1)

10,500 810401050010,501 - 10,999 xxxxxxxxxx1)

11,000 810401100011,001 - 11,499 xxxxxxxxxx1)

11,500 810401150011,501 - 11,999 xxxxxxxxxx1)

12,000 810401200012,001 - 12,499 xxxxxxxxxx1)

12,500 8104012500

T 227 With carbide insert

NEW

d1 d1 Article no.

DCONWS 81 040 ...mm inch

12,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810401270012,701 - 12,999 xxxxxxxxxx1)

13,000 810401300013,001 - 13,499 xxxxxxxxxx1)

13,500 810401350013,501 - 13,999 xxxxxxxxxx1)

14,000 810401400014,001 - 14,499 xxxxxxxxxx1)

14,500 810401450014,501 - 14,999 xxxxxxxxxx1)

15,000 810401500015,001 - 15,499 xxxxxxxxxx1)

15,500 810401550015,501 - 15,999 xxxxxxxxxx1)

16,000 810401600016,001 - 16,499 xxxxxxxxxx1)

16,500 810401650016,501 - 16,999 xxxxxxxxxx1)

17,000 810401700017,001 - 17,499 xxxxxxxxxx1)

17,500 810401750017,501 - 17,999 xxxxxxxxxx1)

18,000 810401800018,001 - 18,499 xxxxxxxxxx1)

18,500 810401850018,501 - 18,999 xxxxxxxxxx1)

19,000 810401900019,001 - 19,499 xxxxxxxxxx1)

19,500 810401950019,501 - 19,999 xxxxxxxxxx1)

20,000 810402000020,001 - 20,499 xxxxxxxxxx1)

20,500 810402050020,501 - 20,999 xxxxxxxxxx1)

21,000 810402100021,001 - 21,499 xxxxxxxxxx1)

21,500 810402150021,501 - 21,999 xxxxxxxxxx1)

22,000 810402200022,001 - 22,499 xxxxxxxxxx1)

22,500 810402250022,501 - 22,999 xxxxxxxxxx1)

23,000 810402300023,001 - 23,499 xxxxxxxxxx1)

23,500 810402350023,501 - 23,999 xxxxxxxxxx1)

24,000 810402400024,001 - 24,499 xxxxxxxxxx1)

24,500 810402450024,501 - 24,999 xxxxxxxxxx1)

25,000 8104025000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 040 06789).

ClampingGuide bushes

5

05|23

Adjustable guide bushesDesignation d D L1 K° G

DGUI DFC OAL THOD

mm mm mm T 229 42 49 82 16 M40 x 1

K°

G dD

L1

d1

T 229 T 229

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 041 ... 81 042 ...mm inch

2,000 81041020002,001 - 2,499 xxxxxxxxxx1)

2,500 81041025002,501 - 2,999 xxxxxxxxxx1)

3,000 81041030003,001 - 3,499 xxxxxxxxxx1)

3,500 81041035003,501 - 3,999 xxxxxxxxxx1)

4,000 8104104000 81042040004,001 - 4,499 xxxxxxxxxx1)

4,500 81041045004,501 - 4,999 xxxxxxxxxx1)

5,000 8104105000 81042050005,001 - 5,499 xxxxxxxxxx1)

5,500 81041055005,501 - 5,999 xxxxxxxxxx1)

6,000 8104106000 81042060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8104106350 81042063506,351 - 6,499 xxxxxxxxxx1)

6,500 81041065006,501 - 6,999 xxxxxxxxxx1)

7,000 8104107000 81042070007,001 - 7,499 xxxxxxxxxx1)

7,500 81041075007,501 - 7,999 xxxxxxxxxx1)

8,000 8104108000 81042080008,001 - 8,499 xxxxxxxxxx1)

8,500 81041085008,501 - 8,999 xxxxxxxxxx1)

9,000 8104109000 81042090009,001 - 9,499 xxxxxxxxxx1)

9,500 81041095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81041095259,526 - 9,999 xxxxxxxxxx1)

10,000 8104110000 810421000010,001 - 10,499 xxxxxxxxxx1)

10,500 810411050010,501 - 10,999 xxxxxxxxxx1)

11,000 8104111000 810421100011,001 - 11,499 xxxxxxxxxx1)

11,500 810411150011,501 - 11,999 xxxxxxxxxx1)

12,000 8104112000 810421200012,001 - 12,499 xxxxxxxxxx1)

12,500 810411250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810411270012,701 - 12,999 xxxxxxxxxx1)

13,000 8104113000 810421300013,001 - 13,499 xxxxxxxxxx1)

13,500 810411350013,501 - 13,999 xxxxxxxxxx1)

14,000 8104114000 810421400014,001 - 14,499 xxxxxxxxxx1)

14,500 810411450014,501 - 14,999 xxxxxxxxxx1)

15,000 8104115000 810421500015,001 - 15,499 xxxxxxxxxx1)

15,500 810411550015,501 - 15,999 xxxxxxxxxx1)

16,000 8104116000 8104216000

T 229 With carbide insert

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 041 ... 81 042 ...mm inch

16,001 - 16,499 xxxxxxxxxx1)16,500 8104116500

16,501 - 16,999 xxxxxxxxxx1)17,000 8104117000 8104217000

17,001 - 17,499 xxxxxxxxxx1)17,500 8104117500

17,501 - 17,999 xxxxxxxxxx1)18,000 8104118000 8104218000

18,001 - 18,499 xxxxxxxxxx1)18,500 8104118500

18,501 - 18,999 xxxxxxxxxx1)19,000 8104119000 8104219000

19,001 - 19,049 xxxxxxxxxx1)19,050 3/4 8104119050

19,051 - 19,499 xxxxxxxxxx1)19,500 8104119500

19,501 - 19,999 xxxxxxxxxx1)20,000 8104120000 8104220000

20,001 - 20,499 xxxxxxxxxx1)20,500 8104120500

20,501 - 20,999 xxxxxxxxxx1)21,000 8104121000 8104221000

21,001 - 21,499 xxxxxxxxxx1)21,500 8104121500

21,501 - 21,999 xxxxxxxxxx1)22,000 8104122000 8104222000

22,001 - 22,224 xxxxxxxxxx1)22,225 7/8 8104122225

22,226 - 22,499 xxxxxxxxxx1)22,500 8104122500

22,501 - 22,999 xxxxxxxxxx1)23,000 8104123000 8104223000

23,001 - 23,499 xxxxxxxxxx1)23,500 8104123500

23,501 - 23,999 xxxxxxxxxx1)24,000 8104124000 8104224000

24,001 - 24,499 xxxxxxxxxx1)24,500 8104124500

24,501 - 24,999 xxxxxxxxxx1)25,000 8104125000 8104225000

25,001 - 25,499 xxxxxxxxxx1)25,500 8104125500

25,501 - 25,999 xxxxxxxxxx1)26,000 8104126000 8104226000

26,001 - 26,499 xxxxxxxxxx1)26,500 8104126500

26,501 - 26,999 xxxxxxxxxx1)27,000 8104127000 8104227000

27,001 - 27,499 xxxxxxxxxx1)27,500 8104127500

27,501 - 27,999 xxxxxxxxxx1)28,000 8104128000

28,001 - 28,499 xxxxxxxxxx1)28,500 8104128500

28,501 - 28,999 xxxxxxxxxx1)29,000 8104129000

29,001 - 29,499 xxxxxxxxxx1)29,500 8104129500

29,501 - 29,999 xxxxxxxxxx1)30,000 8104130000

30,001 - 30,499 xxxxxxxxxx1)30,500 8104130500

30,501 - 30,999 xxxxxxxxxx1)31,000 8104131000

31,001 - 31,499 xxxxxxxxxx1)31,500 8104131500

31,501 - 31,999 xxxxxxxxxx1)32,000 8104132000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 041 06789).

ClampingGuide bushes

05|24

GBE 28

GBE 28

NEW

d1 d1 Article no.

DCONWS 81 059 ...mm inch

3.000 81059030004.000 81059040005.000 81059050006.000 81059060006.350 1/4 81059063507.000 81059070008.000 81059080009.000 81059090009.525 3/8 8105909525

10.000 810591000011.000 810591100012.000 810591200012.700 1/2 810591270013.000 810591300014.000 810591400015.000 810591500016.000 810591600017.000 810591700018.000 810591800019.000 810591900019.050 3/4 810591905020.000 8105920000

GBE 42

GBE 42

NEW

d1 d1 Article no.

DCONWS 81 060 ...mm inch

3.000 81060030004.000 81060040005.000 81060050006.000 81060060006.350 1/4 81060063507.000 81060070008.000 81060080009.000 810600900010.000 810601000011.000 810601100012.000 810601200012.700 1/2 810601270013.000 810601300014.000 810601400015.000 810601500015.875 5/8 810601588016.000 810601600017.000 810601700018.000 810601800019.000 810601900019.050 3/4 810601905020.000 810602000021.000 810602100022.000 810602200022.225 7/8 810602222523.000 810602300024.000 810602400025.000 810602500025.400 1/1 810602540026.000 810602600027.000 810602700028.000 810602800029.000 810602900030.000 810603000031.000 810603100032.000 8106032000

Flexible guide bushesDesignation D L1 K°

DFC OAL

mm mmGBE 28 28 40 22.5GBE 42 42 50 22.5

K°

D

L1

d1

ClampingGuide bushes

5

05|25

Highlights

Clamping sleeves overview

Precision "Made in Germany" Reliable quality

Available as Turbo & Standard Maximum flexibility

Available in round, square or hexagonal versions Adapted to the material

All relevant surfaces are "precision-ground"

Increases component accuracy

NormExternal diameter range

in mmClamping

diameter rangeProfile Version Pages

S10 Ø 3,0 – 10,0 26

S12 Ø 3,0 – 11,0 26

S15 Ø 3,0 – 14,0 27

S16 Ø 3,0 – 15,0 28

S18 Ø 3,0 – 16,0 29

S20 Ø 4,0 – 19,0 30

S25 Ø 4,0 – 24,0 31

ST32 „Turbo“ 32 Ø 5,0 – 32,0 Turbo 32

S10 SW 3,0 – 8,0 26

S12 SW 3,0 – 9,0 26

S15 SW 3,0 – 12,0 27

S16 SW 3,0 – 13,0 28

S18 SW 5,0 – 14,0 29

S20 SW 5,0 – 16,0 30

S25 SW 5,0 – 20,0 31

ST32 „Turbo“ 32 SW 5,0 – 26,0 Turbo 32

Other profile shapes and sizes and extended options available on request.

Adapted high-performance steel

Precision–ground surfaces

Optimised effective channel length

ClampingClamping sleeves – Content overview

05|26

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 10 / 210 E D 10 10 4 7 40S 12 / 212 E D 12 12 4 8 40

Z

PD

L1

d1

S 10 / 210 E Also suitable for all INDEX multi-spindle machines

S 10 / 210 E S 10 / 210 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 043 ... 81 044 ...mm inch

3,000 8104303000 81044030003,001 - 3,499 xxxxxxxxxx1)

3,500 81043035003,501 - 3,999 xxxxxxxxxx1)

4,000 8104304000 81044040004,001 - 4,499 xxxxxxxxxx1)

4,500 81043045004,501 - 4,999 xxxxxxxxxx1)

5,000 8104305000 81044050005,001 - 5,499 xxxxxxxxxx1)

5,500 81043055005,501 - 5,999 xxxxxxxxxx1)

6,000 8104306000 81044060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81043063506,351 - 6,499 xxxxxxxxxx1)

6,500 81043065006,501 - 6,999 xxxxxxxxxx1)

7,000 8104307000 81044070007,001 - 7,143 xxxxxxxxxx1)

7,144 9/32 81043071447,145 - 7,499 xxxxxxxxxx1)

7,500 81043075007,501 - 7,937 xxxxxxxxxx1)

7,938 5/16 81043079387,939 - 7,999 xxxxxxxxxx1)

8,000 8104308000 81044080008,001 - 8,499 xxxxxxxxxx1)

8,500 81043085008,501 - 8,999 xxxxxxxxxx1)

9,000 81043090009,001 - 9,499 xxxxxxxxxx1)

9,500 81043095009,501 - 9,999 xxxxxxxxxx1)

10,000 8104310000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 043 06789).

S 12 / 212 E Also suitable for all INDEX multi-spindle machines

S 12 / 212 E S 12 / 212 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 045 ... 81 046 ...mm inch

3,000 8104503000 81046030003,001 - 3,499 xxxxxxxxxx1)

3,500 81045035003,501 - 3,999 xxxxxxxxxx1)

4,000 8104504000 81046040004,001 - 4,499 xxxxxxxxxx1)

4,500 81045045004,501 - 4,762 xxxxxxxxxx1)

4,763 3/16 81045047634,764 - 4,999 xxxxxxxxxx1)

5,000 8104505000 81046050005,001 - 5,499 xxxxxxxxxx1)

5,500 81045055005,501 - 5,999 xxxxxxxxxx1)

6,000 8104506000 81046060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8104506350 81046063506,351 - 6,499 xxxxxxxxxx1)

6,500 81045065006,501 - 6,999 xxxxxxxxxx1)

7,000 8104507000 81046070007,001 - 7,499 xxxxxxxxxx1)

7,500 81045075007,501 - 7,937 xxxxxxxxxx1)

7,938 5/16 81045079387,939 - 7,999 xxxxxxxxxx1)

8,000 8104508000 81046080008,001 - 8,499 xxxxxxxxxx1)

8,500 81045085008,501 - 8,999 xxxxxxxxxx1)

9,000 8104509000 81046090009,001 - 9,499 xxxxxxxxxx1)

9,500 81045095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81045095259,526 - 9,999 xxxxxxxxxx1)

10,000 810451000010,001 - 10,499 xxxxxxxxxx1)

10,500 810451050010,501 - 10,999 xxxxxxxxxx1)

11,000 8104511000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 045 06789).

ClampingClamping sleeves

5

05|27

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 15 / 203 E D 15 15 6 11 40

Z

PD

L1

d1

S 15 / 203 E S 15 / 203 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 047 ... 81 048 ...mm inch

3,000 8104703000 81048030003,001 - 3,174 xxxxxxxxxx1)

3,175 1/8 81047031753,176 - 3,499 xxxxxxxxxx1)

3,500 81047035003,501 - 3,999 xxxxxxxxxx1)

4,000 8104704000 81048040004,001 - 4,499 xxxxxxxxxx1)

4,500 81047045004,501 - 4,999 xxxxxxxxxx1)

5,000 8104705000 81048050005,001 - 5,499 xxxxxxxxxx1)

5,500 81047055005,501 - 5,999 xxxxxxxxxx1)

6,000 8104706000 81048060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8104706350 81048063506,351 - 6,499 xxxxxxxxxx1)

6,500 81047065006,501 - 6,999 xxxxxxxxxx1)

7,000 8104707000 81048070007,001 - 7,499 xxxxxxxxxx1)

7,500 81047075007,501 - 7,937 xxxxxxxxxx1)

7,938 5/16 8104707938 81048079387,939 - 7,999 xxxxxxxxxx1)

8,000 8104708000 81048080008,001 - 8,499 xxxxxxxxxx1)

8,500 81047085008,501 - 8,999 xxxxxxxxxx1)

9,000 8104709000 81048090009,001 - 9,499 xxxxxxxxxx1)

9,500 81047095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81047095259,526 - 9,999 xxxxxxxxxx1)

10,000 8104710000 810481000010,001 - 10,499 xxxxxxxxxx1)

10,500 810471050010,501 - 10,999 xxxxxxxxxx1)

11,000 8104711000 810481100011,001 - 11,112 xxxxxxxxxx1)

11,113 7/16 810471111311,114 - 11,499 xxxxxxxxxx1)

11,500 810471150011,501 - 11,999 xxxxxxxxxx1)

12,000 8104712000 8104812000

S 15 / 203 E Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 047 ... 81 048 ...mm inch

12,001 - 12,499 xxxxxxxxxx1)

12,500 810471250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810471270012,701 - 12,999 xxxxxxxxxx1)

13,000 810471300013,001 - 13,499 xxxxxxxxxx1)

13,500 810471350013,501 - 13,999 xxxxxxxxxx1)

14,000 8104714000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 047 06789).

ClampingClamping sleeves

05|28

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 16 D 16 16 6 11 40

Z

PD

L1

d1

S 16 S 16

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 049 ... 81 050 ...mm inch

3,000 8104903000 81050030003,001 - 3,499 xxxxxxxxxx1)

3,500 81049035003,501 - 3,999 xxxxxxxxxx1)

4,000 8104904000 81050040004,001 - 4,499 xxxxxxxxxx1)

4,500 81049045004,501 - 4,999 xxxxxxxxxx1)

5,000 8104905000 81050050005,001 - 5,499 xxxxxxxxxx1)

5,500 81049055005,501 - 5,999 xxxxxxxxxx1)

6,000 8104906000 81050060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81049063506,351 - 6,499 xxxxxxxxxx1)

6,500 81049065006,501 - 6,999 xxxxxxxxxx1)

7,000 8104907000 81050070007,001 - 7,499 xxxxxxxxxx1)

7,500 81049075007,501 - 7,999 xxxxxxxxxx1)

8,000 8104908000 81050080008,001 - 8,499 xxxxxxxxxx1)

8,500 81049085008,501 - 8,999 xxxxxxxxxx1)

9,000 8104909000 81050090009,001 - 9,499 xxxxxxxxxx1)

9,500 81049095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81049095259,526 - 9,999 xxxxxxxxxx1)

10,000 8104910000 810501000010,001 - 10,499 xxxxxxxxxx1)

10,500 810491050010,501 - 10,999 xxxxxxxxxx1)

11,000 8104911000 810501100011,001 - 11,112 xxxxxxxxxx1)

11,113 7/16 810491111311,114 - 11,499 xxxxxxxxxx1)

11,500 810491150011,501 - 11,999 xxxxxxxxxx1)

12,000 8104912000 810501200012,001 - 12,499 xxxxxxxxxx1)

12,500 810491250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 8104912700

S 16 Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 049 ... 81 050 ...mm inch

12,701 - 12,999 xxxxxxxxxx1)

13,000 8104913000 810501300013,001 - 13,499 xxxxxxxxxx1)

13,500 810491350013,501 - 13,999 xxxxxxxxxx1)

14,000 810491400014,001 - 14,287 xxxxxxxxxx1)

14,288 9/16 810491428814,289 - 14,499 xxxxxxxxxx1)

14,500 810491450014,501 - 14,999 xxxxxxxxxx1)

15,000 8104915000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 049 06789).

ClampingClamping sleeves

5

05|29

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 18 / 218 E D 18 18 6 11 40

Z

PD

L1

d1

S 18 / 218 E S 18 / 218 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 051 ... 81 052 ...mm inch

3,000 81051030003,001 - 3,174 xxxxxxxxxx1)

3,175 1/8 81051031753,176 - 3,499 xxxxxxxxxx1)

3,500 81051035003,501 - 3,999 xxxxxxxxxx1)

4,000 81051040004,001 - 4,499 xxxxxxxxxx1)

4,500 81051045004,501 - 4,762 xxxxxxxxxx1)

4,763 3/16 81051047634,764 - 4,999 xxxxxxxxxx1)

5,000 8105105000 81052050005,001 - 5,499 xxxxxxxxxx1)

5,500 81051055005,501 - 5,999 xxxxxxxxxx1)

6,000 8105106000 81052060006,001 - 6,499 xxxxxxxxxx1)

6,500 81051065006,501 - 6,999 xxxxxxxxxx1)

7,000 8105107000 81052070007,001 - 7,499 xxxxxxxxxx1)

7,500 81051075007,501 - 7,937 xxxxxxxxxx1)

7,938 5/16 81051079387,939 - 7,999 xxxxxxxxxx1)

8,000 8105108000 81052080008,001 - 8,499 xxxxxxxxxx1)

8,500 81051085008,501 - 8,999 xxxxxxxxxx1)

9,000 8105109000 81052090009,001 - 9,499 xxxxxxxxxx1)

9,500 81051095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81051095259,526 - 9,999 xxxxxxxxxx1)

10,000 8105110000 810521000010,001 - 10,499 xxxxxxxxxx1)

10,500 810511050010,501 - 10,999 xxxxxxxxxx1)

11,000 8105111000 810521100011,001 - 11,112 xxxxxxxxxx1)

11,113 7/16 810511111311,114 - 11,499 xxxxxxxxxx1)

11,500 810511150011,501 - 11,999 xxxxxxxxxx1)

12,000 8105112000 8105212000

S 18 / 218 E Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 051 ... 81 052 ...mm inch

12,001 - 12,499 xxxxxxxxxx1)

12,500 810511250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 8105112700 810521270012,701 - 12,999 xxxxxxxxxx1)

13,000 8105113000 810521300013,001 - 13,499 xxxxxxxxxx1)

13,500 810511350013,501 - 13,999 xxxxxxxxxx1)

14,000 8105114000 810521400014,001 - 14,287 xxxxxxxxxx1)

14,288 9/16 810511428814,289 - 14,499 xxxxxxxxxx1)

14,500 810511450014,501 - 14,999 xxxxxxxxxx1)

15,000 810511500015,001 - 15,499 xxxxxxxxxx1)

15,500 810511550015,501 - 15,874 xxxxxxxxxx1)

15,875 5/8 810511587515,876 - 15,999 xxxxxxxxxx1)

16,000 8105116000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 051 06789).

ClampingClamping sleeves

05|30

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 20 / 225 E D 20 20 8 14 65

Z

PD

L1

d1

S 20 / 225 E S 20 / 225 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 053 ... 81 054 ...mm inch

4,000 81053040004,001 - 4,499 xxxxxxxxxx1)

4,500 81053045004,501 - 4,762 xxxxxxxxxx1)

4,763 3/16 81053047634,764 - 4,999 xxxxxxxxxx1)

5,000 8105305000 81054050005,001 - 5,499 xxxxxxxxxx1)

5,500 81053055005,501 - 5,999 xxxxxxxxxx1)

6,000 8105306000 81054060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8105306350 81054063506,351 - 6,499 xxxxxxxxxx1)

6,500 81053065006,501 - 6,999 xxxxxxxxxx1)

7,000 8105307000 81054070007,001 - 7,499 xxxxxxxxxx1)

7,500 81053075007,501 - 7,937 xxxxxxxxxx1)

7,938 5/16 81053079387,939 - 7,999 xxxxxxxxxx1)

8,000 8105308000 81054080008,001 - 8,499 xxxxxxxxxx1)

8,500 81053085008,501 - 8,999 xxxxxxxxxx1)

9,000 8105309000 81054090009,001 - 9,499 xxxxxxxxxx1)

9,500 81053095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81053095259,526 - 9,999 xxxxxxxxxx1)

10,000 8105310000 810541000010,001 - 10,499 xxxxxxxxxx1)

10,500 810531050010,501 - 10,999 xxxxxxxxxx1)

11,000 8105311000 810541100011,001 - 11,112 xxxxxxxxxx1)

11,113 7/16 810531111311,114 - 11,499 xxxxxxxxxx1)

11,500 810531150011,501 - 11,999 xxxxxxxxxx1)

12,000 8105312000 810541200012,001 - 12,499 xxxxxxxxxx1)

12,500 810531250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 8105312700 8105412700

S 20 / 225 E Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 053 ... 81 054 ...mm inch

12,701 - 12,999 xxxxxxxxxx1)

13,000 8105313000 810541300013,001 - 13,499 xxxxxxxxxx1)

13,500 810531350013,501 - 13,999 xxxxxxxxxx1)

14,000 8105314000 810541400014,001 - 14,499 xxxxxxxxxx1)

14,500 810531450014,501 - 14,999 xxxxxxxxxx1)

15,000 8105315000 810541500015,001 - 15,499 xxxxxxxxxx1)

15,500 810531550015,501 - 15,999 xxxxxxxxxx1)

16,000 8105316000 810541600016,001 - 16,499 xxxxxxxxxx1)

16,500 810531650016,501 - 16,999 xxxxxxxxxx1)

17,000 810531700017,001 - 17,499 xxxxxxxxxx1)

17,500 810531750017,501 - 17,999 xxxxxxxxxx1)

18,000 810531800018,001 - 18,499 xxxxxxxxxx1)

18,500 810531850018,501 - 18,999 xxxxxxxxxx1)

19,000 8105319000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 053 06789).

ClampingClamping sleeves

5

05|31

Clamping sleevesDesignation Pusher Ø D Z P H7 L1

DFC KWW DCOB OAL

mm mm mm mmS 25 / 222 E D 25 25 8 20 65

Z

PD

L1

d1

S 25 / 222 E S 25 / 222 E

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 055 ... 81 056 ...mm inch

4,000 81055040004,001 - 4,499 xxxxxxxxxx1)

4,500 81055045004,501 - 4,999 xxxxxxxxxx1)

5,000 8105505000 81056050005,001 - 5,499 xxxxxxxxxx1)

5,500 81055055005,501 - 5,999 xxxxxxxxxx1)

6,000 8105506000 81056060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 8105506350 81056063506,351 - 6,499 xxxxxxxxxx1)

6,500 81055065006,501 - 6,999 xxxxxxxxxx1)

7,000 8105507000 81056070007,001 - 7,499 xxxxxxxxxx1)

7,500 81055075007,501 - 7,999 xxxxxxxxxx1)

8,000 8105508000 81056080008,001 - 8,499 xxxxxxxxxx1)

8,500 81055085008,501 - 8,999 xxxxxxxxxx1)

9,000 8105509000 81056090009,001 - 9,499 xxxxxxxxxx1)

9,500 81055095009,501 - 9,999 xxxxxxxxxx1)

10,000 8105510000 810561000010,001 - 10,499 xxxxxxxxxx1)

10,500 810551050010,501 - 10,999 xxxxxxxxxx1)

11,000 8105511000 810561100011,001 - 11,499 xxxxxxxxxx1)

11,500 810551150011,501 - 11,999 xxxxxxxxxx1)

12,000 8105512000 810561200012,001 - 12,499 xxxxxxxxxx1)

12,500 810551250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810551270012,701 - 12,999 xxxxxxxxxx1)

13,000 8105513000 810561300013,001 - 13,499 xxxxxxxxxx1)

13,500 810551350013,501 - 13,999 xxxxxxxxxx1)

14,000 8105514000 810561400014,001 - 14,499 xxxxxxxxxx1)

14,500 8105514500

S 25 / 222 E Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 055 ... 81 056 ...mm inch

14,501 - 14,999 xxxxxxxxxx1)

15,000 8105515000 810561500015,001 - 15,499 xxxxxxxxxx1)

15,500 810551550015,501 - 15,999 xxxxxxxxxx1)

16,000 8105516000 810561600016,001 - 16,499 xxxxxxxxxx1)

16,500 810551650016,501 - 16,999 xxxxxxxxxx1)

17,000 8105517000 810561700017,001 - 17,499 xxxxxxxxxx1)

17,500 810551750017,501 - 17,999 xxxxxxxxxx1)

18,000 8105518000 810561800018,001 - 18,499 xxxxxxxxxx1)

18,500 810551850018,501 - 18,999 xxxxxxxxxx1)

19,000 8105519000 810561900019,001 - 19,049 xxxxxxxxxx1)

19,050 3/4 810551905019,051 - 19,499 xxxxxxxxxx1)

19,500 810551950019,501 - 19,999 xxxxxxxxxx1)

20,000 8105520000 810562000020,001 - 20,499 xxxxxxxxxx1)

20,500 810552050020,501 - 20,999 xxxxxxxxxx1)

21,000 810552100021,001 - 21,499 xxxxxxxxxx1)

21,500 810552150021,501 - 21,999 xxxxxxxxxx1)

22,000 810552200022,001 - 22,499 xxxxxxxxxx1)

22,500 810552250022,501 - 22,999 xxxxxxxxxx1)

23,000 810552300023,001 - 23,499 xxxxxxxxxx1)

23,500 810552350023,501 - 23,999 xxxxxxxxxx1)

24,000 8105524000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 055 06789).

ClampingClamping sleeves

05|32

Clamping sleeves – TurboDesignation Pusher Ø D P H7 L1

DFC DCOB OAL

mm mm mmST 32 D 32 32 20 90

DP

L1

d1

ST 32 ST 32

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 057 ... 81 058 ...mm inch

5,000 8105705000 81058050005,001 - 5,499 xxxxxxxxxx1)

5,500 81057055005,501 - 5,999 xxxxxxxxxx1)

6,000 8105706000 81058060006,001 - 6,349 xxxxxxxxxx1)

6,350 1/4 81057063506,351 - 6,499 xxxxxxxxxx1)

6,500 81057065006,501 - 6,999 xxxxxxxxxx1)

7,000 8105707000 81058070007,001 - 7,499 xxxxxxxxxx1)

7,500 81057075007,501 - 7,999 xxxxxxxxxx1)

8,000 8105708000 81058080008,001 - 8,499 xxxxxxxxxx1)

8,500 81057085008,501 - 8,999 xxxxxxxxxx1)

9,000 8105709000 81058090009,001 - 9,499 xxxxxxxxxx1)

9,500 81057095009,501 - 9,524 xxxxxxxxxx1)

9,525 3/8 81057095259,526 - 9,999 xxxxxxxxxx1)

10,000 8105710000 810581000010,001 - 10,499 xxxxxxxxxx1)

10,500 810571050010,501 - 10,999 xxxxxxxxxx1)

11,000 8105711000 810581100011,001 - 11,499 xxxxxxxxxx1)

11,500 810571150011,501 - 11,999 xxxxxxxxxx1)

12,000 8105712000 810581200012,001 - 12,499 xxxxxxxxxx1)

12,500 810571250012,501 - 12,699 xxxxxxxxxx1)

12,700 1/2 810571270012,701 - 12,999 xxxxxxxxxx1)

13,000 8105713000 810581300013,001 - 13,499 xxxxxxxxxx1)

13,500 810571350013,501 - 13,999 xxxxxxxxxx1)

14,000 8105714000 810581400014,001 - 14,499 xxxxxxxxxx1)

14,500 810571450014,501 - 14,999 xxxxxxxxxx1)

15,000 8105715000 810581500015,001 - 15,499 xxxxxxxxxx1)

15,500 810571550015,501 - 15,874 xxxxxxxxxx1)

15,875 5/8 810571587515,876 - 15,999 xxxxxxxxxx1)

16,000 8105716000 810581600016,001 - 16,499 xxxxxxxxxx1)

16,500 810571650016,501 - 16,999 xxxxxxxxxx1)

17,000 8105717000 8105817000

ST 32 Also suitable for all INDEX multi-spindle machines

NEW NEW

d1 d1 Article no. Article no.

DCONWS 81 057 ... 81 058 ...mm inch

17,001 - 17,462 xxxxxxxxxx1)17,463 11/16 8105717463

17,464 - 17,499 xxxxxxxxxx1)17,500 8105717500

17,501 - 17,999 xxxxxxxxxx1)18,000 8105718000 8105818000

18,001 - 18,499 xxxxxxxxxx1)18,500 8105718500

18,501 - 18,999 xxxxxxxxxx1)19,000 8105719000 8105819000

19,001 - 19,049 xxxxxxxxxx1)19,050 3/4 8105719050

19,051 - 19,499 xxxxxxxxxx1)19,500 8105719500

19,501 - 19,999 xxxxxxxxxx1)20,000 8105720000 8105820000

20,001 - 20,499 xxxxxxxxxx1)20,500 8105720500

20,501 - 20,999 xxxxxxxxxx1)21,000 8105721000 8105821000

21,001 - 21,499 xxxxxxxxxx1)21,500 8105721500

21,501 - 21,999 xxxxxxxxxx1)22,000 8105722000 8105822000

22,001 - 22,224 xxxxxxxxxx1)22,225 7/8 8105722225

22,226 - 22,499 xxxxxxxxxx1)22,500 8105722500

22,501 - 22,999 xxxxxxxxxx1)23,000 8105723000 8105823000

23,001 - 23,499 xxxxxxxxxx1)23,500 8105723500

23,501 - 23,999 xxxxxxxxxx1)24,000 8105724000 8105824000

24,001 - 24,499 xxxxxxxxxx1)24,500 8105724500

24,501 - 24,999 xxxxxxxxxx1)25,000 8105725000 8105825000

25,001 - 25,399 xxxxxxxxxx1)25,400 1/1 8105725400

25,401 - 25,499 xxxxxxxxxx1)25,500 8105725500

25,501 - 25,999 xxxxxxxxxx1)26,000 8105726000 8105826000

26,001 - 26,499 xxxxxxxxxx1)26,500 8105726500

26,501 - 26,999 xxxxxxxxxx1)27,000 8105727000

27,001 - 27,499 xxxxxxxxxx1)27,500 8105727500

27,501 - 27,999 xxxxxxxxxx1)28,000 8105728000

28,001 - 28,499 xxxxxxxxxx1)28,500 8105728500

28,501 - 28,574 xxxxxxxxxx1)28,575 1 1/8 8105728575

28,576 - 28,999 xxxxxxxxxx1)29,000 8105729000

29,001 - 29,499 xxxxxxxxxx1)29,500 8105729500

29,501 - 29,999 xxxxxxxxxx1)30,000 8105730000

1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 7 working days

For xxxxx please specify the required diameter when ordering (e.g. Ø 6.789 – article number 81 057 06789).

ClampingClamping sleeves

5

05|33

Technical Information

Special shapes

Runout accuracy

Run-out tolerances of collets with profiles

Profile sizeL

mmStandard

norm

WNT standard

from up to Standard HP*

0,5 0,9 3 0,12 < 0,02 < 0,01

1 1,5 6 0,12 < 0,02 < 0,01

1,6 3 10 0,12 < 0,02 < 0,01

3,1 6 16 0,12 < 0,02 < 0,01

6,1 10 25 0,15 < 0,02 < 0,01

10,1 18 40 0,2 < 0,02 < 0,01

18,1 24 50 0,2 < 0,02 < 0,01

24,1 30 60 0,2 < 0,02 < 0,01

30,0 80 0,2 < 0,02 < 0,01

Run-out tolerances of round collets

holeL

mm

WNT standard

from up to Standard HP*

0,5 0,9 3 < 0,01 < 0,008

1 1,5 6 < 0,01 < 0,008

1,6 3 10 < 0,015 < 0,008

3,1 6 16 < 0,015 < 0,008

6,1 10 25 < 0,015 < 0,008

10,1 18 40 < 0,02 < 0,01

18,1 24 50 < 0,02 < 0,01

24,1 30 60 < 0,02 < 0,01

30,0 80 < 0,03 < 0,015

Other profile shapes and sizes and extended options available on request. 

Due to the variety of different applications, it may be necessary to individually adapt some products to the processes. To do this, we offer you maximum quality according to your specifications. Get in touch using one of the options below and let us create your clamping device:

If you would like to submit an enquiry regarding bespoke solutions, you can find a detailed enquiry form in the download area of our website. Please fill in this form carefully and send it to us via email or fax. → www.wnt.com/uk/download/

Your wish is our command. That is why the WNT tolerances are far tighter than standard tolerances. The service lives of both the machine components and the tools are extended. 

Our profile collets and guide bushes are micro-eroded with up to 7 slots. This ensures maximum quality with minimal run-out tolerances. 

Interested in our clamping devices? Our Technical Sales Engineers would be happy to advise you. You can of course also talk to our in-house Technical Sales Engineers by calling our freefone number.

Technical Advice Enquiry Form

* Lower run-out tolerances with the WNT HP (High Precision) option on request.

* Lower run-out tolerances with the WNT HP (High Precision) option on request.

ClampingTechnical Information