Wise Guys Catalog - HotRodHotlineManual 7”Slides Two Way Power Slide Power Lumbars 2”& 4” Adjustable Risers Seat Heaters: w/ Hi & Lo Setting Back and Seat Elements Standard frame

www.wiseguys-seats.com 1-866-494-7348 P.O. Box 211, Elkhart, IN 46515

Seating Supplier to the

Street Rodder Road Tour Car

1-866-494-7348 www.wiseguys-seats.com

‘35-’48 Fat Fender

Standard FeaturesCenter Fold Out Arm Rest2 - 12 Volt ReceptaclesReclining Mechanism16 Gauge Steel ConstructionHigh Quality Foam, giving youcomfort in the right spot.

Standard FeaturesIndividual Center Arms2 - 12 Volt ReceptaclesReclining Mechanism Each Side16 Gauge Steel ConstructionHigh Quality Foams of Different

Densities, giving youcomfort and support.

Style A2” Roll & Pleat

Style BHorizontal Pleat

Options:Manual 7” SlidesTwo Way Power SlidePower Lumbars2” & 4” Adjustable RisersSeat Heaters:

w/ Hi & Lo Setting Back and Seat Elements

Standard frame available in2”shorter height version.Narrow frame can be modified formodification fee.

Options:Manual 7” SlidesSix Way Power PedestalPower Lumbars2” & 4” Adjustable RisersSeat Heaters:

w/ Hi & Lo SettingBack and Seat Elements

Style B2” Roll & Pleat

Style AHorizontal Pleat

Bucket Stylewith 7.5” center area.

Drink holder additional cost.(Available this model only)

Front Seats ‘32 -’34 standard & ‘28 - ‘31(4” Narrower)

Bucket Style(Extra cost for frame modification)

1

NNararrroow vw versionersioncc an ban b e used ine used in

1920’1920’s ors orearearly 1930’ly 1930’ss

pickpickupsups


16” , 19”, 21” Bucket Seats*

Corvette 1 & Corvette 2 Bucket Seats

Standard Features:Reclining Mechanism16 Gauge Steel FrameHigh Density Foam Combinations

Options:Seat Heaters:


LumbarsSlidesHead RestArms3-Point Seat Belt SystemSix Way Power Pedestals2” & 4” Adjustable Risers

Standard Features:Reclining Mechanism16 Gauge Steel FrameHigh Density Foam Combinations

Options:Seat Heaters:


LumbarsSlides

16”Sony Pattern

19”2” Roll & Pleat

21”Sony Pattern

21” Combo 21” Concept 1 21” Sony with 3 Point Seat Belt

Corvette 21955-62

Corvette 11953-54

2

*Dimensions indicate widest upholstered width of seat or back.


‘55, ‘56, ‘57 Chevrolet

1947-55 Pick-up Seat ( 52” wide) / 1955+ Pick-up (57” wide)

Standard Features:4 Recliner Release Points2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated

w/ Multi Density Foam TypesNo Sag SpringsSplit Back7” SlidesRisers

Standard Features:Center Fold Out Arm2 Recliner Release Points2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated

w/ Multi Density Foam TypesNo Sag SpringsSplit Back7” Slides4” Adjustable Risers

Options:Six Way Power PedestalPower LumbarsSeat Heaters:


Options:Power LumbarsSeat Heaters:


Adjustable Rear Bench SeatStandard Features:16 Gauge Steel FrameFoam Fabricated

w/ Multi Density Foam TypesNo Sag SpringsAdjust Back from 42” to 55”Adjust Seat from 45” to 58”Adjustable Risers

3


4

NENE WW

NENE WW

ISS (Integrated Seating System)

Standard Features:Fully Integrated 3 Point Seat SystemAll Belts Attached to FrameSeat Belt retractor attached to FrameShoulder Belt Harness Deploys From

Finished Face of SeatRecliner Mechanism Cable Actuated Meets FMVSS certification (207 & 210)Seat Belts Available in several colors Multi Density Foam Package“E” Coated FrameFlexalator Spring System

(Note: seat back reclines backward and comesforward to straight up position only)

The Original Frame designed for HRHP is now available witha Recliner Mechanism as a standard feature. This frame wasdesigned for HRHP for their production units. We haveproduced several hundred of these frames for the carsproduced for their customers. Due to the request of thecustomers buying these cars and wanting the seat to reclinefront and back we are now making the frame with therecliner as a standard feature.

Dearborn Deuce (Hot Rods and Horse Power Seat Frame)

Standard Features:Power lumbarsLeather option – 100% leather seat16 gauge steel or better frame Fold out center armMulti density foam packFlexalator spring system12” travel slide that does not add not

height to the frame“E” Coated

Options:Power LumbarsManual LumbarsSeat Heaters – W/ Hi & Lo setting,

Back and Seat Element.


1932-34 Std. & 1928-31 NarrowStandard Features:Center Fold Out Arm16 Gauge Steel FrameReclining Mechanism2 -12 Volt Power Receptacles No Sag SpringsMulti Density Foam Pack

Split Back RoadsterStandard Features:Center Fold Out Arm16 Gauge Steel FrameReclining Mechanism (each side)2 -12 Volt Power Receptacles No Sag SpringsMulti Density Foam Pack

Options:Slides 7”TravelLumbarsPower Slides2” & 4” Adjustable RisersSeat Heaters:


3 Point Seat Belt

Our Foam Package isSuperior to Others

by the Use ofMulti DensityFoam Types

‘35-’48 Fat Fender, Split Back and Bucket Back

‘28 -’34 Bucket Style

‘32 - ‘34 Standard and ‘28 -’31 Narrow (4” narrower)

Standard Features:Center Fold Out Arms-Split BackCenter 7.5” Fold Out Arm-Bucket Back4 Recliner Release Points-Split Back2 Recliner Release Points-Bucket Back2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated

w/ Multi Density Foam TypesNo Sag Springs on SeatFlexalator Backs

Options:PedestalPower Lumbars2” & 4” Adjustable RisersSeat Heaters:


Slide-out Self-adjusting Drink holders(Bucket Style Only)

6-way Power SlidesManual Slides

Fat FenderBucket Back Fat Fender

Split Back

AAll Fll FrramesamesAAvvailableailable

UUpholstpholsterereded

5


1-866-494-7348 www.wiseguys-seats.com1-866-494-7348 www.wiseguys-seats.com

1932-34 Std. & 1928-31 NarrowStandard Features:Center Fold Out Arm16 Gauge Steel FrameReclining Mechanism2 -12 Volt Power Receptacles No Sag SpringsMulti Density Foam Pack

Split Back RoadsterStandard Features:Center Fold Out Arm16 Gauge Steel FrameReclining Mechanism (each side)2 -12 Volt Power Receptacles No Sag SpringsMulti Density Foam Pack

Options:Slides 7”TravelLumbarsPower Slides2” & 4” Adjustable RisersSeat Heaters:


3 Point Seat Belt

Our Foam Package isSuperior to Others

by the Use ofMulti DensityFoam Types

‘35-’48 Fat Fender, Split Back and Bucket Back

‘28 -’34 Bucket Style

‘32 - ‘34 Standard and ‘28 -’31 Narrow (4” narrower)

Standard Features:Center Fold Out Arms-Split BackCenter 7.5” Fold Out Arm-Bucket Back4 Recliner Release Points-Split Back2 Recliner Release Points-Bucket Back2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated

w/ Multi Density Foam TypesNo Sag Springs on SeatFlexalator Backs

Options:PedestalPower Lumbars2” & 4” Adjustable RisersSeat Heaters:


Slide-out Self-adjusting Drink holders(Bucket Style Only)

6-way Power SlidesManual Slides

Fat FenderBucket Back Fat Fender

Split Back



5



‘55, ‘56, ‘57 Chevrolet



Standard Features:4 Recliner Release Points2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated w/ Multi Density Foam TypesNo Sag SpringsSplit Back7” SlidesRisers

Options:Six Way Power PedestalPower LumbarsSeat Heaters

w/ Hi & Lo settingBack and Seat Element

1955+ Pick-up Seat (57” wide) 1947-55 Pick-up Seat (52” wide)

Standard Features:Center Fold Out Arm2 Recliner Release Points2 -12 Volt Power Receptacles16 Gauge Steel FrameFoam Fabricated w/ MultiDensity Foam TypesNo Sag Springs7” Slides4” Adjustable Risers

Options:Power LumbarsSeat Heaters

W/ Hi & Lo settingBack and Seat Element

Adjustable Rear Bench SeatStandard Features:16 Gauge Steel FrameFoam Fabricated w/ Multi DensityFoam TypesNo Sag SpringsAdjust Back from 42” to 55”Adjust Seat from 45” to 58”Adjustable Risers

1957 Chevy

1955-56 Chevy

7


NENE WW

8

The Original Frame designed for HRHP is now available witha Recliner Mechanism as a standard feature. This frame wasdesigned for HRHP for their production units. We haveproduced several hundred of these frames for the carsproduced for their customers. Due to the request of thecustomers buying these cars and wanting the seat to reclinefront and back we are now making the frame with therecliner as a standard feature.


Standard Features:Power lumbarsLeather option – 100% leather seat16 gauge steel or better frame Fold out center armMulti density foam packFlexalator spring system12” travel slide that does not add not

height to the frame“E” Coated

Options:Power LumbarsManual LumbarsSeat Heaters – W/ Hi & Lo setting,

Back and Seat Element.

ISS (Integrated Seating System)

Standard Features:Fully Integrated 3 Point Seat SystemAll Belts Attached to FrameSeat Belt retractor attached to FrameShoulder Belt Harness Deploys From

Finished Face of SeatRecliner Mechanism Cable Actuated Meets FMVSS certification (207 & 210)Seat Belts Available in several colors Multi Density Foam Package“E” Coated FrameFlexalator Spring System

(Note: seat back reclines backward and comesforward to straight up position only)

NENE WW


Tilt Pedestal

Swivel Pedestal Fat Fender & 7” Bucket Slides

Standard Features:16/Ga Steel MinimumPowder Coated BlackLow Profile 1.25” Ht.Multiple Bolt Patterns

Standard Features:Powder Coated BlackLocks in Front positionWise Guys Seat FrameMultiple Bolt Patterns

See Dimension sectionfor size.

Power Pedestals

Closed Position

Six Way Bench

Front

Fat Fender Bucket

Rear

Tilts Forward

Six Way Bucket

9


Seat Risers

Drink Holder Arm & Head Rest

Custom Embroidery Seat BeltsLap Belts and 3 Point Shoulder Harness

Seat Heater

Lumbars

Power

Adjustable 2” & 4” Risers2” -2 1/8 to 2 5/8”

4” - 3 1/2” to 4 3/4”

2- ElementsBack & Seatw/ Hi & Lo setting

Slide-out, self-adjusting.Not available in all models.

4” Formed Risers

Manual

ArmL: 16.5” x W: 2.5” x D: 6”

Manual

Head RestBottom L: 11.25”Top L: 10” x H: 4.5” x D: 4.5”

Black

Tan

Blue

Silver

Charcoal

Burgundy

Colors Available

Torch Red

10

See Dimension section for sizes.

5.10"

25.89"26.39"

21"

28.5"

10.5"8"4"

24"

Front Seat Standard (1932-34) and Narrow (1928-31) Frame and Upholstery Dimensions

Front Seat Standard (1932-34) and Narrow (1928-31)Bucket Style Frames and Upholstery Dimensions

Side View UpholsteredSide View Frame

Std. 46"Narrow. 42"

Front View UpholsteredFront View Frame

26.39"25.89"

Std. 44"Narrow 40"

Std. 44.23"Narrow 39.23"

Std. 39.50" Front BenchNarrow. 35.50" Front Bench

Std. 39" Front BenchNarrow. 35" Front Bench

Std. 39.50" Front BenchNarrow. 35" Front Bench

Std. 39" Front Bench

28"

11"

Narrow. 35" Front Bench

Narrow 39" Rear Bench Max.Narrow 39" Rear Bench Max.Narrow 39" Rear Bench Max.Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.

Narrow 39" Rear Bench Max.

Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.

Front View Bucket Seat Frame Front View Bucket Seat Upholstered

25.89"

Narrow 17.5"Std. 19.5"

Std. 46"Narrow 44"

Narrow 18"Std. 20"

Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.Std. 43" Rear Bench Max.Narrow 39" Rear Bench Max.Narrow 39" Rear Bench Max.Narrow 39" Rear Bench Max.

11

5.125"

21.37"

27.33"

47"18"

14"

28"

5"

44"

49.5"

21.25"17"

9.25"

29"

45"

30"

24"

10.5"4.25"

1935-48 Fat Fender Frame and Upholstery Dimensions

1935-48 Fat Fender Bucket Frame and Upholstery Dimensions

45.15"22.06"

27.33"

45.75" 40.5"

47"

47"

46"

Front View UpholsteredFront View Frame

Front View Bucket Frame(Depth of Frame 21”)

Side View Frame Side View Upholstered

49.5"

12

28"

24"

3"7"

Max.21" on 21" FrameMax.19" on 19" Frame

17.5" on 21" Frame

15.75" on 19" Frame

27.88"

10.50"

20.50"

Standard Bucket Frame and Upholstery Dimensions

Side View Frame Side View Upholstered

Front View Frame Front View Upholstered

11.5"

20.625"

3.25"

27.75" 28"

24"

7"3"

3 Point Bucket Frame and Upholstery Dimensions

Side View UpholsteredSide View Frame

21" SeatActual Frame Width 17.5"Bolt Pattern11.5" F/R15.0626" L/R

2"



13

27"

3"

3"

21.5"

20"

23.5"

17.63"

21"

22.625"

22.25"

27"2.75"

19.75"11.5"

14.5"

22.25"

17.63"

21.25"

22.625"21"

11.5"5.75"3.75"

Corvette 1 (1953-54) Frame and Upholstery Dimensions

Corvette 2 (1955-62) Frame and Upholstery Dimensions

14

27.25"

9.5"4.5"

23"

57.25"

1955-57 Chevrolet & 50‘s Pick-Up Frame and Upholstery Dimensions

1955-57 Chevrolet and '50's Pick-Up Side View Frame 1955-57 and '50's Pick-Up Side View Upholstered

1955-57 Chevrolet Front View Upholstered

25.875"

11.5" F/R49" L/R

18.5"

5.5"

21"

57.25"

1955-57 Chevrolet Front View Frame

57.25"

50's Pick-Up Front View Upholstered57.25"

50's Pick-Up Front View Frame

52.25" 52.25"1947-55 Series 2 GMC/ Chevrolet Pick-Up Front View Frame 1947-55 Series 2 GMC/ Chevrolet Pick-U Front View Upholstered

59"

55"

59"59"59"

15

23.75"

17" 17"

SeatMountingHoles11.5"

20.125"

15.25"

17"Seat Mounting Holes

Outside 15.1875"Middle 13.75"Inside 12.25"

Adjustable from 45" to 58" Max.



4.625"

Adjustable Rear Bench Seat Frame

Tilt Pedestal

Swivel Pedestal 7" Standard Bucket Slide

MountingHoles:13.5”

Mounting Holes:13.75”

13"Front

to Rear

12.25"13.75"

16.625"Side to Side

15.125”

SeatMounting

Holes:11”

11/2”

Bottom Top

Seat Mounting Holes:

Mounting Plate size: 10" Front to Rear12.25" Side to Side

Mounting Bolt position: 8" Front to Rear11" Side to Side

11.50"

11"

.75"

Front

Side Elevation

Rear

16

6-Way Bucket Power Pedistal Dimensions

2” and 4” Adjustable Risers Dimensions

4” Formed Riser Dimensions

14”Bucket Mounting Holes

BucketMounting

Holes

4.10”

Top View Side View

Floor Mounting PositionsRange From 14.25” to 10.5”

Motor has 1.375” up and down traveland has 9” fore and aft travel.11.5”

13.30”

15"3"

3"

1.5"

Slots 1.5" x .375”

Slots 3" x .375”

8.5"

13"

15"2"

2"

1.5"

1.5"

Slots 1" x .375”

2” Adjustable Riser 4” Adjustable Riser

Slots 3" x .375”

Slots 3.5" x .375”

8.5"

13"

12.5"

14.5"

14"11"

16.25"

4"

5"

17

26.25"

8.75"4.5"

21.5"


ISS(Integrated Seating System)

Dearborn Deuce Side View Frame Dearborn Deuce Side View Upholstered

24.5625"

28” 29”

5”3.25”

7.75”

17.375"2"

26.5625"

25”

9”

2.25”

21” max.17”

39.5" Back 36"

26.25"

Dearborn Deuce Front View Frame Dearborn Deuce Front View Upholstered

39.75" Front

39.375"

40"

37"39.5"

8.75"

18

NENE WW

NENE WW

Return Policy:All damages, shortages or errors must be reported within 7 days of receipt of shipment.Any returns must be approved prior to being shipped, and must have a RGA#. All returns are charged a 20% restocking fee.Freight, shipping and handling are non refundable at all times.Upholstered goods are custom made items, no returns or refunds on these items.

Limited WarrantyWise Guys Seating and Accessories Corp. warrants that its products are free from manufacturing defects in material andworkmanship. This Limited Warranty extends to the first retail purchaser and begins on the date of receipt of the merchandiseand extends for a period of thirty-six (36) months from such date. This Limited Warranty does not cover normal wear and tearand use of the merchandise, including items such as nicks, scratches and tears. This Limited Warranty shall become null and voidif the merchandise is installed in a faulty manner or has been modified following sale by Wise Guys Seating and Accessories Corp.

WISE GUYS SEATING AND ACCESSORIES CORP. EXPRESSLY LIMITS THE DURATION OF ALL EXPRESS AND IMPLIED WARRANTIES OFMERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE TO THE WARRANTY PERIOD SETFORTH ABOVE. WISE GUYS SEATING AND ACCESSORIES CORP. EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE AFTER EXPIRATION OF THE WARRANTY PERIOD. No action to enforceexpress or implied warranties may be commenced later than ninety (90) days after the expiration of this Limited Warranty. Thereis no warranty of any nature made by Wise Guys Seating and Accessories Corp. beyond what is contained in this LimitedWarranty. No dealer, sales person or anyone else has authority to enlarge, amend or modify this Limited Warranty. THEPURCHASER OF THIS MERCHANDISE AND ANY PERSON TO WHOM THIS MERCHANDISE IS TRANSFERRED, AND ANY PERSON WHOIS AN INTENDED OR UNINTENDED USER OR BENEFICIARY OF THIS MERCHANDISE, SHALL NOT BE ENTITLED TO RECOVER FROMWISE GUYS SEATING AND ACCESSORIES CORP. ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. Some states do not allow theexclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ThisLimited Warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

General Conditions of Sale:Prices subject to change / All sales are final / Seating surface is 100% leather on leather upholstered seats.Wise Guys Seats and Accessories Corp.makes makes no representation as to proper installation of its components.Wise Guys Seats and Accessories Corp does not claim, infer or certify in any way that its products have been tested to meet anyFMVSS regulations.

Toll Free 1-866-494-7348www.wiseguys-seats.comP.O. Box 211 / Elkhart, Indiana 46515

Printed 7/08

We carry an extensive line of:

Leather HidesVinylsUpholstery FabricsHeadliner Fabrics Carpets - Molded and Flat

Documents

Wise Guys Catalog - HotRodHotlineManual 7”Slides Two Way Power Slide Power Lumbars 2”& 4” Adjustable Risers Seat Heaters: w/ Hi & Lo Setting Back and Seat Elements Standard frame