WIRES and CABLES - Nexans...AIRBUS and EUROCOPTER WIRES and CABLES Rating Temperature 200 C Hook up Wires-Airframe Wiring • Conductor : Nickel Plated Copper (AWG 22 to 10) High Strength

A I R B U S a n d E U R O C O P T E R

W I R E S a n d C A B L E S

A I R B U S and E U R O C O P T E R W I R E S and C A B L E S

Rating Temperature

200°C

Hook up Wires-Airframe Wiring

• Conductor : Nickel Plated Copper (AWG 22 to 10)High Strength Nickel Plated Copper Alloy (AWG 26 & 24)

ASN CF 2266 • Insulation : Polyimide Tapes + Topcoat 26 to 10E0261 • Suitable for UV laser marking

ASNE0264 PF 2266 2 CF or EN 2266 Basic Cores Twisted Cable 26 to 10

ASNE0266 QF 2266 3 CF or EN 2266 Basic Cores Twisted Cable 26 to 10

ASN RF 2266 4 CF or EN 2266 Basic Cores Twisted Cable 26 to 10E0268

1 CF or EN 2266 Basic Core + ASN• Shield : Nickel Plated Copper Spiral Shield 26 to 14ASN SJ 2713 • Sheath : Polyimide Tapes + Topcoat ENE0270 • Suitable for UV laser marking 26 to 10

2 CF or EN 2266 Basic Cores + ASN• Shield : Nickel Plated Copper Spiral Shield 26 to 12ASN TK 2713 • Sheath : Polyimide Tapes + Topcat ENE0272 • Suitable for UV laser marking 26 to 10

3 CF or EN 2266 Basic Cores + ASN• Shield : Nickel Plated Copper Spiral Shield 26 to 14ASN UD 2713 • Sheath : Polyimide Tapes + Topcoat ENE0274 • Suitable for UV laser marking 26 to 12

4 EN 2266 Basic Cores +• Shield : Nickel Plated Copper Spiral Shield EN

VL 2713 • Sheath : Polyimide Tapes + Topcoat 26 to 14• Suitable for UV laser marking

Specifications

ASN/ABS/NSA EN

Ref. Type Ref.

ConstructionAWGSize

Range


Rating temperature

260°C

Hook up Wires-Airframe WiringArc Tracking & Hydrolysis Resistant

Hybrid Insulation Type

• Conductor : Nickel Plated Copper (AWG 22 to 06)High Strength Nickel Plated Copper Alloy (AWG 26 & 24)

DM 2267-008A • Insulation : Polyimide + PTFE Tapes 26 to 06• Suitable for UV Laser marking

PN 2267-007B 2 DMA or EN 2267-007 Basic Cores Twisted Cable 26 to 06

QL 2267-007C 3 DMA or EN 2267-007 Basic Cores Twisted Cable 26 to 06

RK 2267-007D 4 DMA or EN 2267-007 Basic Cores Twisted Cable 26 to 06

1 DMA or EN 2267-007 Basic Core +• Shield : Nickel Plated Copper Spiral Shield

GJ 2714-011A • Sheath : Polyimide + PTFE Tapes 26 to 10• Suitable for UV Laser Marking

2 DMA or EN 2267-007 Basic Cores Twisted Cable +• Shield : Nickel Plated Copper Spiral Shield

MH 2714-011B • Sheath : Polyimide + PTFE Tapes 26 to 10• Suitable for UV Laser Marking

3 DMA or EN 2267-007 Basic Cores Twisted Cable +• Shield : Nickel Plated Copper Spiral Shield

UU 2714-011C • Sheath : Polyimide + PTFE Tapes 26 to 10• Suitable for UV Laser Marking

4 DMA or EN 2267-007 Basic Cores Twisted Cable +• Shield : Nickel Plated Copper Spiral Shield 26 to 14

VV 2714-011D • Sheath : Polyimide + PTFE Tapes• Suitable for UV Laser Marking

5 DMA or EN 2267-007 Basic Cores Twisted Cable +• Shield : Nickel Plated Copper Spiral Shield 18 to 12

MJ 2714-012E • Sheath : Polyimide + PTFE Tapes• Suitable for UV Laser Marking

Specifications

Cable Code EN

Ref. Ref.

ConstructionAWGSize

Range

All DK types are replaced by DM types.

5 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 18 to 12MME 2714-014E • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

6 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield: Nickel Plated Copper Spiral Shield On requestMMF 2714-014F • Sheath: Polyimide + PTFE Tapes• Suitable for UV laser marking

7 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 24MMG 2714-014G • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

Arc Tracking & Hydrolysis ResistantLight weight


Rating temperature

260°C


• Conductor : Nickel Plated Copper (AWG 22 to 2)High Strength Plated Copper Alloy (AWG 26 & 24)

DR 2267-010A • Insulation : Special Polyimide Tape + PTFE tape(s) 26 to 2• Suitable for UV laser marking

DRB 2267-009B 2 DRA or EN 2267-009A Basic Cores Twisted Cable 26 to 4

DRC 2267-009C 3 DRA or EN 2267-009A Basic Cores Twisted Cable 26 to 4

DRD 2267-009D 4 DRA or EN 2267-009A Basic Cores Twisted Cable 26 to 14

1 DRA or EN 2267-009A Basic Core• Shield : Nickel Plated Copper Spiral Shield 26 to 10MLA 2714-013A • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

2 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 26 to 10MLB 2714-013B • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

3 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 26 to 10MLC 2714-013C • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

4 DRA or EN 2267-009A Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 26 to 14MLD 2714-013D • Sheath : Polyimide + PTFE Tapes• Suitable for UV laser marking

Specifications

Cable Code EN

Ref. Ref.

ConstructionAWGSize

Range

NEW!


Rating Temperature

180°C


• Conductor : Nickel Copper Clad Aluminium (AWG 24 to 4)ABS Nickel Plated Aluminium (AWG 3 to 000) 24 to 40949 AD • Insulation : Special Polyimide Tape + PTFE tape(s) 3 to 000

• Suitable for UV laser marking

ABS 24 to 41354 ADB 2 ADA or ABS 1354 Basic Cores Twisted Cable 3 to 000

ABS 24 to 41354 ADC 3 ADA or ABS 1354 Basic Cores Twisted Cable 3 to 000

ABS 24 to 41354 ADD 4 ADA or ABS 1354 Basic Cores Twisted Cable 3 to 1

ABS1354 ADE 5 ADA or ABS 1354 Basic Cores Twisted Cable 24

2 ADA or ABS 1354 Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 24 to 10ABS VNB • Sheath : Polyimide + PTFE Tapes

1356 • Suitable for UV laser marking

3 ADA or ABS 1354 Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 24 to 10ABS VNC • Sheath : Polyimide + PTFE Tapes


4 ADA or ABS 1354 Basic Cores Twisted Cable• Shield : Nickel Plated Copper Spiral Shield 24 to 14ABS VND • Sheath : Polyimide + PTFE Tapes


Specifications

ABS EN

Ref. Type Ref.

ConstructionAWGSize

Range

1 ADA or ABS 1354 Basic CoreABS • Shield : Nickel Plated Copper Spiral Shield 24 to 101356 VNA • Sheath : Polyimide + PTFE Tapes


Arc Tracking & Hydrolysis ResistantHybrid Insulation TypeAluminium Conductors

NEW!


Coaxial Cables

ASNE0634

Specifications

ASN/ABS/NSA MILC17EN

Ref. Ref.Ref. Type

Construction

Char

acter

istic

Impe

danc

e

Over

all d

ia.

(nomi

nal)

mm

Rating temperature

200°C

WH

• Inner Conductor : Silver Plated Annealed-Copper-Covered Steel• Dielectric Core : PTFE• Outer Conductor : 1 Silver Plated Copper Braid• Jacket : PFA

3.58 95 �

ASNE0690 WL

M17 / 13700001

No similartype

EN4604-005

• Inner Conductor : Silver Plated Copper Alloy• Dielectric Core : Low Density Fluorocarbon• Outer Conductor : 2 Silver Plated Copper Braids• Jacket : PFA

2.30 75 �

ASNE0293

XFM17 / 175

00001RG 400 U

• Inner Conductor : Silver Plated Copper• Dielectric Core : PTFE• Outer Conductor : 2 Silver Plated Copper Braids• Jacket : FEP

4.95 50 �

XEM17 / 138

00001RG 188 AU

• Inner Conductor : Silver Plated Annealed-Copper Covered Steel• Dielectric Core : PTFE• Outer Conductor : 1 Silver Plated Copper Braid• Jacket : PTFE

2.70 50 �

WZ

EN4604-003

No similartype

• Inner Conductor : Silver Plated Copper• Dielectric Core : Low Density PTFE• Outer Conductor : 1 Metallized foil + 1 Silver Plated Copper Braid• Jacket : FEP

3.55 50 �

NSA935 344

ASNE0752

WS

EN4604-004

No similartype

• Inner Conductor : Silver Plated Copper• Dielectric Core : PTFE• Outer Conductor : Silver Plated Copper Braid + high immunity tape

+ Silver Plated Copper Braid• Jacket : Polyimide Tape

2.50 50 �

ASNE0692

WN

EN4604-007

No similartype

• Inner Conductor : Silver Plated Copper• Dielectric Core : Low Density PTFE• Outer Conductor : 1 Silver Plated Copper Tape

+ Silver Plated Copper Braid • Jacket : PTFE

8.00 50 �

ASNE0691

WMEN

4604-006

No similartype

• Inner Conductor : Silver Plated Copper• Dielectric Core : Low Density PTFE• Outer Conductor : 1 Silver Plated Copper Tape

+ Silver Plated Copper Braid • Jacket : FEP

3.85 50 �

ASNE0406

WDEN

4604-008

No similartype

• Inner Conductor : Silver Plated Copper• Dielectric Core : Foamed FEP• Outer Conductor : 2 Silver Plated Copper Braids• Jacket : FEP

7.70 50 �

ECS0757

KENo

similartype

• Inner Conductor : Silver Plated Copper Alloy• Dielectric Core : PTFE• Outer Conductor : 3 Silver Plated Copper Braids• Jacket : 2 FEP jackets

3.45 50 �

Over

all d

ia.

(nomi

nal)

mm


Twinax Bus

Shielded and Sheathed 100 � Data Bus Twisted Pair• Conductor : Nickel Plated Copper Alloy

ABS WF • Insulation : PTFE 3.30 24 200°C0386 • Shield : Nickel Copper Braid

• Sheath : Polyimide Tapes

Shielded and Sheathed 125 � Data Bus Twisted Pair• Conductor : Silver Plated Copper Alloy

ASN HE • Insulation : PTFE 4.50 24 150°CE0259 • Shield : Nickel Plated Copper Braid

• Sheath : Polyimide Tapes

Shielded and Sheathed 78 � Data Bus Twisted Pair

EN • Conductor : Silver Plated Copper AlloyASN XM 3375- • Insulation : PTFE 3.10 24 200°C

E0290 • Shield : Nickel Plated Copper Braid006 • Sheath : Polyimide Tapes

Shielded and Sheathed 77 � Data Bus Twisted PairEN • Conductor : Silver Plated Copper Alloy

ASN WJ 3375- • Insulation : PTFE 3.7 24 150°CE0479 004-B • Shield : 2 Tinned Plated Copper Braids

• Sheath : FEP

Shielded and Sheathed 77 � Data Bus Twisted Pair

EN • Conductor : Silver Plated Copper AlloyECS WW 3375- • Insulation : PTFE 2.90 26 200°C

0700 • Shield : 2 Silver Plated Copper Braids 007 • Sheath : FEP


ASN WY • Insulation : PTFE 2.50 26 200°CE0811 • Shield : 1 Silver Plated Copper Braid

• Sheath : FEP

Shielded and Sheathed 75 � Data Bus Twisted Pair• Conductor : Nickel Plated High Strength Copper Alloy

ASN • Insulation : Polyimide Tape(s) + PTFE Topcoat 3.00 26 200°CE0849 HJ • Shield : Nickel Plated Copper Braid + 2 High Immunity Tapes

+ Nickel Plated Copper Braid• Sheath : FEP


EN • Insulation : PTFE 3.80 24 200°CWV 3375- • Shield : Silver Plated Copper Braid + 1 High 005 Immunity Tape + Silver Plated Copper Braid

• Sheath : FEP

Specifications

ASN/ABS/NSA

Ref. TypeConstruction

AWG

Size

Ratin

gTe

mp.

Shielded and Sheathed 77 � Data Bus Twisted PairEN • Conductor : Silver Plated Copper Alloy

WJ 3375- • Insulation : PTFE 3.7 24 200°C004-C • Shield : 2 Silver Plated Copper Braids

• Sheath : FEP

EN

Ref.

Shielded and Sheathed Low Noise Twisted Pair• Conductor : Silver Plated Annealed-Copper-Covered Steel

NSA • Insulation : PTFE + Low Noise Treatment 4.36935 306 YK • Shield : Nickel Plated Copper Braid Max 22 260°C

• Sheath : Polyimide + PTFE Tapes• Application : Low Noise Cables

FEP Sheathed Coil CordASN HL 6 CF 24 + 2 CF 20 +1 CF 16 Basic Wires + 200°C

E0488 • Sheath : FEP

FEP Sheathed Coil CordASN HH 3 CF 16 + 3 CF 22 Basic Wires + 7 PTFE fillers 200°C

E0385 • Sheath : FEP


Quad Ethernet

Thermocouple Cable 4.00

MBBN YH EN • Conductors : Nickel Chromium/ Nickel Aluminium AWG 22 22

3320 004-006 4049- • Insulation : PTFE + Polyimide + PTFE Tapes to 260°C004 • Shield : Nickel Plated Copper Braid 4.55 20

• Jacket : Polyimide Tape + PTFE Tape AWG 20

Specifications

ASN/ABS/NSA

Ref. Type

Construction

Shielded Quad Cable 100 �• Conductor : Silver Plated Copper

ABS • Insulation : FEP + Separator Tape 1503 KD • Shield : 1 Silver Plated Copper Braid 4.40 24 125°C

• Sheath : FEPSuitable for UV laser marking

Optical Fibre Cable • Core : 62.5/125 Silica, Silicone coating 400 µm

ABS 003LF • Jacket : Zero Halogen Copolymer 0963 • Mechanical strength: Polymer Aromatic Fiber Braid 1.80 125°C

• Outer Jacket : Zero Halogen Copolymer + ETFE

Over

all d

ia.

(nomi

nal)

mm

AWG

Size

Ratin

gTe

mp.

Optical Cable

Special Cables

EN

Ref.


Flight Test Cables

ASN • Conductor : Nickel Plated Copper (suitable for solderability)

E0409 BG • Insulation : PTFE Tape 0.97 24 200°C• Suitable for UV laser marking

1 ASN E0409 BG Basic Core +ASN • Shield : Nickel Plated Copper Spinning

E0410 SU • Sheath : Polyimide Tape + PTFE Tape 1.42 24 200°C


2 ASN E0409 BG Basic Cores Twisted Cable + PTFE Separator Tape +

ASN TV • Shield : Nickel Plated Copper Spinning 2.54 24 200°CE0411 • Sheath : Polyimide Tape + PTFE Tape


4 ASN E0409 BG Basic Cores Twisted Cable + PTFE Separator Tape +

ASN VF • Shield : Nickel Plated Copper Spinning 3.00 24 200°CE0412 • Sheath : Polyimide Tape + PTFE Tape


Thermocouple Cable

ASN • Conductors : Nickel Chromium/Nickel Aluminium

E0413 HK • Insulation : PTFE Tape 2.70 24 260°C• Shield : Nickel Plated Copper Braid• Sheath : Polyimide Tape + PTFE Tape

Specifications

ASN/ABS/NSA

Ref. Type

Construction

Over

all d

ia.

(nomi

nal)

mm

AWG

Size

Ratin

gTe

mp.

Satcom Feeders

• Coaxial assemblies• Operating frequency: 1.6 GHz• Customized products


Fire Resistant Cables

• Conductor : 27% Nickel Clad Copper Alloy for AWG 22

ECS EN 27% Nickel Clad Copper for other AWG

0741 DW 2346- • Insulation : Fire Resistant Insulation + PTFE Tape 22 to 14 260°C005 • Suitable for UV Laser Marking

• Application : Fire Proof Wires

1 DWA Basic Core +

ECS EN • Shield : Nickel Plated Copper Braid

0742 GPA 4608- • Sheath : PTFE Tapes 22 to 14 260°C004 • Suitable for UV Laser Marking


2 DWA Basic Cores +


0742 GPB 4608- • Sheath : PTFE Tapes 22 to 14 260°C004 • Suitable for UV Laser Marking


3 DWA Basic Cores +


0742 GPC 4608- • Sheath : PTFE Tapes 22 to 14 260°C004 • Suitable for UV Laser Marking


ECS EN

0741 DWB 2346- 2 DWA Basic Cores Twisted Cable 22 to 14 260°C005 • Application : Fire Proof Wires

ECS EN

0741 DWC 2346- 3 DWA Basic Cores Twisted Cable 22 to 14 260°C005 • Application : Fire Proof Wires

Construction AWGSize

RatingTemp.

EN • Conductor : 27% Nickel Clad Copper Alloy for AWG 22ASN 2346- 27% Nickel Clad Copper for other AWG

E0437 DL003 • Insulation : Silica Fiber + Fiberglass Braid + PTFE Tape 22 to 16 260°C

• Application : Fire Resistant Wires

Specifications

ECS EN

Ref. Type Ref.

Specifications

ASN/ABS/NSA

Ref. Type


Power Feeder Cables

Construction AWGSize

RatingTemp.EN

Ref.

ASNE0438 YV

• Conductor : Nickel Plated Aluminium Alloy• Insulation : Polyimide Tapes + Aromatic Polyamide Braid,

Coated with Nonflammable Lacquer

06to

0000180°C

ASNE0471 QP 3 ASNE0438 Basic Cores Twisted Cable

• Conductor : Aluminium Alloy• Insulation : Polyimide Tapes + Aromatic Polyamide Braid,

Coated with Nonflammable Lacquer

06 180°C

NSA935 308 YU

04to

0000150°C

NSA935 131 DG

EN2854

• Conductor : Nickel Plated Copper• Insulation : Composite Polyimide fiber glass Tape + PTFE tape(s)

10to

0000260°C

ABS0949 AD

• Conductor : Nickel Plated Aluminium• Insulation : Special Polyimide Tape + PTFE tape(s)• Suitable for UV laser marking

3to

000180°C

ABS1354

ADBADCADD

2, 3 or 4 ADA or ABS 1354 Basic Cores Twisted Cable3 to000

3 to 1180°C

A e r o s p a c e W I R E S and C A B L E S

Nex

ans

rese

rves

the

right

to m

odify

pro

duct

cha

ract

erist

ics

wit h

out n

otic

e, in

ord

er to

con

form

with

new

sta

ndar

ds o

r to

impr

o ve

prod

uct p

erfo

rman

ce

D

esig

n LC

Imre

ssio

n

140, rue Eugène DelacroixBP1 - 91211 Draveil cedex FranceTel.: +33 (0)1 69 83 78 00Fax: +33 (0)1 69 42 05 70E-mail: [email protected]

600 South Parker StreetPo Box 909

Elm City, NC 27822 - 0909 - USATel: 1 252 236 4311 - Fax: 1 252 236 3613

A comprehensive cable rangeSince 1938 and the creation of Filotex in Draveil (France), Nexans has been a driving force in the world of aerospacecables. Today, Nexans is proud to be able to supply a complete range of aircraft wires and cables - which is also the largest in the industry. From high temperature cables to low-loss coaxial cables and from data-buses for In FlightEntertainment Systems to fire resistant engine wires, Nexans provide every aircraft application with a range so wide that you’ll be able to rationalize your purchasing policy. It goes without saying that our only concern is to provide you with the cable solution you need and - thanks to our combined expertise in the USA and Europe in technologies as diverse as PTFE Powder Extrusion, Tape Wrap cables, Cross Linked cables and Melt Extrusion - We can do it.

Worldwide servicesNexans is the only supplier approved by both Airbus and Boeing and with a significant presence in both. With ISO 9001 certified factories in Europe and the USA (Draveil, France and Elm City, NC, USA) and international commercial teams (Europe, USA, Asia-Pacific), we bring a local touch to a service with a global vision of the aerospace industry. Nexans’s human, technical and financial resources ensure a worldwide service you can trust and rely on.

Expertise at your serviceFrom the introduction of tape wrapped cables on Concorde to the development of new composite cables, Nexans hasmade a major contribution to the safety and performance of aircraft electrical systems. However, much remains to bedone. In the current economic environment the overall cost of cabling is always a factor. We are ready to work with you to find the cost-effective solutions and to evaluate the possible routes, from the choice of the best technology to organizingthe logistics - Put us to the test.

Specialists in electronic cablingYou’ll find Nexans products in all sorts of industries - telecommunications, civil and military electronics and aeronautics -but our objective is always the same. To design, manufacture and distribute the high performance data transmissioncables vital to high technology industries. The performance synergies between these industries keep Nexans at the leadingedge in the provision of products and solutions, therefore to meet all your interconnect requirements.

NexansNexans is a worldwide leader in the cable industry. The Group brings an extensive range of advanced copper and optical fiber cable solutions to the infrastructure, industry and building markets. Nexans cables and cabling systems can be found in every area of people’s lives, from telecommunications and energy networks, to aeronautics, aerospace,automobile, railways building, petrochemical, medical applications, etc. With an industrial presence in 29 countries and commercial activities in 65 countries, Nexans employs 20,000 people and had sales in 2004 of euros 4.9 billion.Nexans is listed on the Paris stock exchange.

More information on www.nexans.com

Nexans : The fourth French company certified EN 9100At the beginning of April 2003, the production site of Draveil (France) obtained from the AFAQ (French Association forQuality Assurance) the EN 9100 certification of its Quality System. Nexans became thus the fourth French company certified EN 9100 by the AFAQ.

Aerospace Wires and Cables: The largest product portfolio

Documents

WIRES and CABLES - Nexans...AIRBUS and EUROCOPTER WIRES and CABLES Rating Temperature 200 C Hook up Wires-Airframe Wiring • Conductor : Nickel Plated Copper (AWG 22 to 10) High Strength