Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
WIRELESSTHERMOSTAT
WIRELESS
FEATURES
THERMOSTAT WIRELESSTHERMOSTAT
INTENDED USE AND PRINCIPLE OF OPERATION
It will automatically turn on/off heating devices or cooling devices as your preset target temperature,to maintain a stable room temperature in order toprovide comfort and save energy.
SPECIFICA TION
Transmitter,Remote thermostat control:CURRENT temp. range: 0.0 ℃~70 ℃ or 32.0 °F~158.0 °FTARGET temp. range: 0.0 ℃~70 ℃ or 32.0 °F~158 .0 °FCURRENT Temperature resolution: ±1℃ / ℉Batteries: 2PCS*1.5V AAA batteryLow temperature: ≤0.0 ℃, CURRENT Shows LL High temperature: ≥70.0 ℉,CURRENT Shows HH Wall mounted holder & Table stand
Receiver, Plug in sock et :Transmission Frequency: 433.92MHzMaximum Rang e: 20 met er s in o pen ar e aMaximum Rating:EU type: 230V/16A/50Hz, 3680W Max.UK type: 250V/13A/50Hz,3250W Max.USA type: 110V/15A/60Hz, 1800W Max.
Remote control Transmitter
Plug Receiver
LED indicator
Switch status
Current temp
Battery statusHeat/Cool mode
temp. unit
temp. unitTarget temp
- / + button
-/ON +/OFF
Status indicator
Rating lable
Plug
Plug and play type,no need installationHeating Mode or Cooling Mode switchableLCD with green backlightDisplay Current temperatureDisplay Target temperatureAutomatic learn code/Manually learn codeC/ F switchableHigh/Low temperature warningEasy setting with memory functionLow battery warningRoom thermostatRF 433Mhz RF technologyMulti-channels,one remote controls multi plugsPortable design,hold in hand/Stand on table/wall mounted
RemoteThermostat
EU Socket UK Socket US Socket
The Wireless Thermostat is intended for automaticcontrol of electrical heating appliances or coolingappliances and consists of 2 components: a RemoteControl Unit with intergrated temperature sensor and a plug in socket unit.
WIRELESSTHERMOSTAT
WIRELESSTHERMOSTAT
WIRELESSTHERMOSTAT
Pairing process
WIRELESSTHERMOSTAT
Step1: Plug the socket into outlet. the LED indicatorwill be blinking, means the socket is in pairing mode,which will last 30 seconds.
WIRELESSTHERMOSTAT
Step2: Place the remote controller nearby the socket,which will constantly talk to the socket, the LED indicator on socket will stop flashing in seconds, pairing successful.
W IRELESSTH ERM OSTAT
* Ensure the remote control is close to the socket during the pairing process without any blockage between the socket and remote.
System setting
-/ON +/ OFF
Place 2xAA battery into the remote controller, the display will shows the system setting
-/ON +/ OFF
the HEAT/COOL icon
flashes, press -/+ together
to select desired mode, Press
-/+ together to confirm or
wait 10 seconds, it will confirm
and proceed to next setting
the temp system icon flashes,
press -/+ button together to select
desired temp system press -/+
together to confirm or wait 10
seconds,it will confirm and proceed
to operation interface.
-/ON +/ OFF
Operating interface
Manual Mode
-/ON +/ OFF
Press -/+ buttons
together for 3 seconds,
enter manual mode,
target temp will vanish
Cl ear in
manual mode
-/ON +/ OFF
Press
to change
the status of switch
-/+ buttons
together
Manual ly turn
on/off the switch
Thermostat setting
-/ON +/ OFF
Press the - or + to change
the target temp.
-/ON +/ OFF
Set the target temp to 25
Celsius degree under cool mode
-/ON +/ OFF -/ON +/ OFF
the temp will automatically adjust temp to be ±1℃target
in our case, the cooler devicewill be turned on above 26℃ and turned off below 24℃(vise versa in )heat mode
Reset the system
in operating interface, press
and hold -/+together for 5
seconds to reset the system
-/ON +/ OFF
System reboot.Go to system
setting section and program
your settings.
Battery replacement
2 x AAA battery
Please replace the battery when the icon shows on display, be sure to replace with same type AAA.fresh
-/ON +/ OFF
MADE IN CHINA
How to use