Connectivity Made Simple

1 1

2

WELCOMELighting has come a long way since the days of incandescent lamps and dimmer switches. Today’s consumer is looking for solutions to everyday problems. We don’t just want quality light; we want quality light with wireless dimming controls, daylight harvesting, glare control optics--the best experience technology has to offer. Deco Lighting is committed to bringing you best-in-class luminaires and state-of-the-art controls that make wireless commissioning easy and efficient. Take a moment to look through our offerings and find a solution that satisfies your needs.

Simple. Scalable. Wireless.

3

Bluetooth is the most robust, secure wireless protocol in the industry. It has been vetted over many years of consumer use in such products as smartphones, laptops and tablets. Bluetooth Mesh provides a unique opportunity to revolutionize the world of lighting by putting control of commercial applications into the hands of the end user. Gone are the days when expensive lighting control specialists are required to commission each fixture on your jobsite—the Bluetooth technology puts this piece into the hands of the layman, giving total access and control to the people who live and work in the lighting space. Among the many reasons why we at Deco Lighting chose this over any other protocol is that Bluetooth Mesh operates over 40 frequency channels, using a frequency-hopping scheme that is immune to any interference. It runs well in crowded environments (areas with many active wireless devices) and remains the most accessible wireless technology available today. In addition, Bluetooth Mesh is low energy, enabling the use of energy-harvesting technology to power wireless nodes, resulting in much lower standby power consumption. Affordability is another factor, as Bluetooth Mesh technology is enabled using a standard smartphone, resulting in an ease of use that adds value to any application. And, as you’ll see in the following pages, Bluetooth Mesh offers the best wireless security in the industry.

Why Bluetooth Mesh?

4

5 5

6

Advantages of Deco MeshDeco Mesh is a wireless, Bluetooth protocol that provides secure connectivity between your phone and all the lights in your job space. Deco’s patent allows us to place a Bluetooth chip in our California designed drivers, eliminating the cost of expensive dongles or routers, and allowing you to commission instantly with the push of a button. The mesh system means that each driver, each light fixture, talks to the next, ensuring that every fixture is grouped to your specification. Each light is commissioned in seconds from your phone and is ready for on/off, dimming, high-end trimming, and scene selection. A wireless, kinetic wall switch can be placed anywhere in the room to manage basic controls, and a sensor captures occupancy and daylight controls. A digital wall switch that acts as a gateway to the Cloud will be available soon to bring all building and energy management tools under one roof. The scalability is endless, as the Deco Mesh app allows for as many as 60,000 fixtures to be combined into a single group.

REDUNDANCYA primary characteristic of the Deco Mesh network is that it provides redundancy. A weakness of standard Bluetooth is that it is limited by range. Communication between Bluetooth assets can break down if the distance is too far. Deco Mesh can communicate between assets as long as one asset is within range of another asset, and a message can be passed from one object to another, allowing one object to communicate with another that can be a significant distance away by using intermediary fixtures to pass the message along. Instead of one-to-one communication or WiFi (which is hindered by high-power requirements) Deco Mesh relies on a network of interconnected devices to relay important data with maximum efficiency.

DECO LIGHTINGThe same company that leverages the best technology available to bring the simplest, most user-friendly experience in lighting has turned its attention to providing the most effective wireless control system in the industry. Deco Mesh was custom-built to enhance the fluidity of IoT (the Internet of Things, the network of devices connected via the Internet, capable of collecting and exchanging data), bringing essential lighting controllability to the enduser at no additional cost. Deco Mesh using the Bluetooth protocol is a game-changing event, disrupting traditional business the same way the introduction of the Internet did in the early days of digital technology. Deco Lighting is proud to be at the forefront of such innovation.

6

7

BLUETOOTH MESH SECURITY

8

Keeping You Safe in the Digital AgeSecurity is the greatest concern when consumers discuss wireless technology and the Internet of Things (IoT). From agriculture to hospitals, from residential smart homes to commercial smart buildings, and from power stations to traffic management systems, IoT systems and technologies will touch many parts of the world we live in. Security breaches in IoT systems could have catastrophic consequences, which is why Deco Lighting chose to work with Bluetooth Mesh.

Security is at the heart of the Bluetooth Mesh networking design. And since Bluetooth Mesh can manage thousands of devices communicating with one another at the same time, security of the entire network is protected using measures developed and tested for this purpose. The result is a robust and comprehensive system of checks and balances that makes Bluetooth Mesh the most secure wireless protocol on the market.

Such measures include:• Multi-Layer Security: Using advanced cryptography, security in Bluetooth Mesh

protects your networks against various threats and issues on multiple layers. The network topology is built around mandatory security keys designed to anticipate and protect the network from cyber attacks.

• Black-Listing Potential Threats: If a node is removed from a Bluetooth mesh network, the device and keys it contains cannot be used to mount an attack. As such, a node that was removed from the network, which contains old security keys, is no longer a member of the network; it poses no threat and can’t be used to infiltrate the network.

• Redundancies on Multiple Fronts: Security redundancies provide unprecedented levels of protection.

• Reliable, Secure Connections: The Internet of Things is driving demand for safe and secure connectivity across all market sectors. Only Bluetooth Mesh offers the industrial-grade, government-grade, multi-layer security that the IoT demands.

For a full description of Bluetooth Mesh security protocols please visit this link:https://www.bluetooth.com/blog/bluetooth-mesh-security-overview/

9

SIMPLE, FLEXIBLE DESIGNDeco Mesh allows you to easily enable wireless communication and sensing when needed. With multiple sensor options, you can add wireless communication with or without sensing into any fixture. With multiple control options, your fixtures now provide added benefits to any design for any job.

START SMALL AND GROW

Deco Mesh’s Bluetooth network allows you to scale at your own pace. Whether it’s a small office or an entire floor plan, Deco Mesh gives you the flexibility to add controls and sensors without disturbing the architectural fabric of the building.

Deco Mesh Key Features

DAYLIGHT HARVESTING

INTENSITY LEVELS

GROUPING & ZONING

OVER THE AIR (OTA)

Utilize natural light to reduce the amount of electrical light needed to sufficiently illuminate your space. Daylight harvesting helps you save money while saving the environment.

With 0-10V dimming, you have total control of your lighting intensity levels so your space fits your needs.

Grouping fixtures and IoT connected devices allows you to create zones to effectively and efficiently control large, varying set ups to your desired specifications.

Deco Mesh drivers include over the air updates to keep software current as technology advances.

10

REDUCE RISK TRUSTED RELIABILITY

Mesh networking is connectivity made simple, allowing for intuitive commissioning, grouping & zoning, and modifications with just a few clicks from your mobile device.

Combining Bluetooth networking with Deco Lighting’s proven track record of quality fixtures, Deco Mesh provides superior wireless communication. Use automated sensors and controls that won’t fail, backed by an unbeatable warranty.

1% DIMMING

SCENES

MESH NETWORK

OCCUPANCY/VACANCY

Being able to dim your lights down as low as 1% gives you the most flexibility to control the intensity level to fit exactly how you want your space to look and feel.

Easily set your groups and zones to dim or brighten at certain times that you designate.

These networks provide redundancies by overlapping connected devices, ensuring security, reliability, and scalability.

Use PIR occupancy sensors for Occupancy Sensing-Automatic ON/OFF or Vancancy Sensing-Manual ON/Automatic Off

11

System Elements

12

Bluetooth Mesh Driver• Deco’s Bluetooth Low Energy (BLE) Mesh Driver is an ultra

compact, constant current driver with intelligent dimming that can automatically detect 0-10V and TRIAC dimming, and function accordingly.

• Programmable from 600-1200 milliamps, with a 50 watts maximum, as well as built-in Bluetooth Mesh radio for wireless control. 

Bluetooth Occupancy and Daylight Sensor• EMDC Easyfit motion detection with illumination sensor is a self-

powered device that monitors the environment for person-movement using a passive infrared (PIR) sensor, measuring the light level via a dedicated illumination sensor. 

• EMDC operaAtes self-powered in most applications based on the available light in the environment (electric or natural light) and can therefore be flexibly mounted on the ceiling without the need for any wiring.

Bluetooth Dimming Switch• Self-powered wireless controls are simple to install. The Single uses

EnOcean energy harvesting technology to communicate wirelessly with other devices supporting the Bluetooth Low Energy (BLE) Advertising standard. 

• The rocker pad is self-powered and never requires batteries because the simple act of pressing the rocker generates enough energy to send wireless Bluetooth Low Energy (BLE) Advertising telegrams to other devices.

13

With the increase in the number of IoT connected devices, Bluetooth Mesh gives users the ability to control everything in their office from luminaires to the thermostat, and so much more. Asset-tracking and information-processing capabilities allow you to easily adapt and automate the control of your space. Whether you’re interested in embedding Deco Mesh into your small office or you’re looking to fully adopt mesh networking for an entire floor plan, this wireless network can scale to whatever size best fits your needs.

DECO IS THE ANSWERTransform existing office into a smart office

14

In a small office like this, you can see how there’s already over a dozen IoT connected devices. Through the use of Deco Mesh enabled luminaires with Bluetooth drivers, combined with intelligent lighting control sensors and switches, you have the most control possible with the push of a button.

Fixture w/Bluetooth Mesh Driver

Bluetooth Occupancy and Daylight Sensor

Bluetooth Dimming Switch

15

Architectural LED Luminaire

The Vector is a high-performance linear series built from the ground-up with leading-edge technology and a smart modular design that is easily customizable for any project concept.

16

FEATURES

DIMENSIONS

PerformanceSelected by IES for the 2017 Progress ReportDual Circuit (DC) option enables independent dimming and control of uplight/downlight

Up to 1200 lm/ft direct, 1400 lm/ft indirect at 4000KDLC Listed for utility rebates.

5”

X1

X2

2.44

2 3 4 6 8

X1

24.32” 36.32” 48.32” 72.32” 96.32”

X2

23.35” 35.35” 47.35” 71.35” 95.35”

•

•

••

17

2.5”

2.5”X

2

X1

DIMENSIONS 2 3 4 6 8

X1

20.89” 32.89” 44.89” 68.89” 92.89”

X2

24.60” 36.60” 48.60” 72.60” 96.60”

FEATURES

PerformanceDelivers up to 1,200 lm/ft at 4000K90+ CRI for accurate interior color renderingR9 value of 60+Power Factor > 0.90; THD < 20%3 Channel Tunable White5 Channel Color Tuning

Housing: T5-6063 Aluminum with a clear anodized finishLens: extruded acrylic blend with 80% transmissivity, designed with a snap-fit into the housingEnd caps: powder coated die-cast ADC aluminum; fastened to the housing with an internal galvanized steel pull bracket

•

•

•

••••••

18

A sleek interior linear luminaire packed with highly-functional and configurable controls, and designed to complement the sophisticated, minimalist look of modern interior spaces.

Interior Ambient LED Luminaire

19

The design-driven Game Over LED Fixture features easy installation and delivers a cost-saving solution for upgrading fluorescent troffers or parabolics to LED technology. Each fixture is dimmable and offers efficacies of up to 140 lumens per watt. A main diffuser and slanted troffer reduce the GO Fixture’s glare to provide soft, dispersed illumination with the comfort of occupants in mind.

SERIESCommercial LED Luminaires

19

20

High-powered optical engine delivers main beam focus through the optically designed acrylic lens.Linear ribbed acrylic lens overlay manages the balance of efficiency and aesthetics.Delivers efficacy of up to 140 lm/WLinear arrayed LED modules provide soft, but effective illumination.

Frosted acrylic lens that easily removes for easy cleaning.Dimming (0-10V) and Architectural Narrow lens are standard. Ideal for recessed commercial applications such as office spaces, hospitals, educational facilities, transportation centers, etc.

FEATURES

DIMENSIONS

•

•

••

•

•

•

X 1

X2 X

3

2 x 2 23.898” 23.858” 2.726”

2 x 4 47.953” 23.858” 3.019”

X2

1.142”

X2

X 1

X 1

X3

21

The DACH-LED round series is a functional and multi-purpose channel family that incorporates premium performance and construction durability. Various mounting methods and numerous options and accessories make this fixture adaptable to any setting. The luminaire is designed to illuminate storage/utility areas, coves, display cases, shops, task areas, and general area lighting. The DACH-LED is an excellent choice for illuminating commercial, industrial, institutional and retail applications.

Commercial LED Channel

21

22

DACH-LED Round DACH-LED Square

X1 X2 X3

4' 48.121" 3.307" 2.811"

8' 96.114" 3.307" 2.823"

X1 X2 X3

4' 48.178" 3.289" 2.811"

8' 95.984" 3.316" 2.823"

DLC Premium listed for utility rebatesDie formed channel with square shaped diffuserPowder coated white enamel finish.Easy wireway access/wireway cover.Numerous KOs for easy installation.UL listed, suitable for damp location.Operating Temperature: -20ºC to +50ºC Ambient

Performs at up to 138 lumens per watt; CRI: 83+L70 Lifetime Rating: 106,000 HoursEmergency backup to provide 16W (2000 Lumens) MAX load for 90 min.Optics: Architectural frosted diffuse lens eliminates pixelation, improves uniformity and minimizes glare.

FEATURES•••••••

•••

•

DIMENSIONS

X2

3.49”

X3

X2

X3

23 23

Steel plate back housing ensures that fixture remains durable and strong.Back-lit design requires no light guide plateLightweight design (40% lighter than edge-lit flat panel).Seamless aluminum frame, no crack, no gap, no light leak.

Low flicker, 0-10V Dimming.Selectable CCT (3500K, 4000K, 5000K)DLC Premium Listed

FEATURES

DIMENSIONS

•

••

•

•••

X3 X

3

X3

X1 X

1

X1

X2 X

2

X2

X1 X2 X3

1’x4' 47.76” 11.93” 1.61”

2’x4' 23.78” 23.78” 1.61”

2’x4' 47.76” 23.78” 1.61”

24

Backlit Panel

BLP is a high performance LED panel that uses a unique back-lit-design to provide a longer lasting lighting solution, replacing traditional fluorescent lighting or low-end edge-lit panels found in offices, hospitals, schools and more.

25 25

Type C tubes are ideal for customers with older fluorescent ballasts who want to maximize efficiency, but don’t want to install Type B linear voltage retrofit lamps. Deco’s Bluetooth Mesh Drivers can be integrated with robust dimming and control functionality, helping to offset moderate labor and installation costs. Type C LED tubes offer high system efficacy, guaranteed system compatibility, and the greatest overall performance. Best of all, Type C LED tubes with Deco’s Bluetooth Mesh Drivers are eligible for unique rebate opportunities.

UL Type C LED tubes operate with Deco Mesh Drivers that power the lamp, rather than using an integrated driver or external fluorescent ballast as a power source. UL Type C involves electrical modification to the existing fixture, but the low-voltage outputs of the external LED driver are connected to the sockets instead of line voltage as with UL Type B.

BENEFITSMore control with 0-10V dimming functionsImproved experience with low optical flickerUnique rebate opportunitiesHigh energy-efficiency/ minimal driver lossImproved surge protection and line immunity compared to Type B tubesReduced energy consumption and suitable for Title 24 installations

26

27

SUPERIOR PERFORMANCEEasyfit Motion Sensor

Self-powered wireless technology

RANGE DIAGRAM

EMDC Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person-movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor.

Wireless sensors and fixtures must be located typically within 33ft (10m) or 246ft (75m) outdoor line of sight.

Sensor

Fixture

66 ft(20 m)

66 ft(20 m)

28

Sensor Detection Range

Top View

Under standard operation conditions, EMDCB Easyfit sensor is self-supplied via its solar cell in conjunction with an internal energy store, which enables the sensor to operate for four days in absolute darkness.

Ceiling

Floor

8.5 ft(2.5 m)

10 ft(3 m)

10 ft(3 m)

10 ft(3 m)

12.5 ft(3.8 m)

7.5 ft(2.3 m)

2.5 ft(0.8 m)

2.5 ft(0.8 m)

7.5 ft(2.3 m)

0 12.5 ft(3.8 m)

29

SUPERIOR PERFORMANCEEasyfit Single Rocker

Self-powered wireless technologyESRPB Single Rocker Pad for BLE are universal energy-harvesting wireless switches implementing the 2.4 GHz Bluetooth Low Energy (BLE) radio standard.

Whenever a rocker is pushed down or released, electrical energy is created and a set of BLE advertising frames is transmitted identifying the rocker status (pushed or released).

30

Switch Range -Line of Sight

ESRPB is based on the maintenance free, self-powered Bluetooth Low Energy (BLE) pushbutton transmitter module PTM 215B and delivered as single rocker (ESRPB) variants using the US rocker pad form factor.

33 ft(10 m)

31

COMMISSION FROM THE PALM OF YOUR HANDCommissioning has never been easier thanks to the Deco app!

Connect FixtureSimply tap the + icon

and save

Fixture ConfigureConfigure any fixture to dim to whatever preference desired

32

GroupingEasily add devices to a group by tapping the +

icon and saving

ProfilesCreate a profile for

your groups and set the parameters

2917 Vail Ave. Commerce, CA 90040T: 800.613.3326 • 310.366.6866F: 310.366.6855info@getdeco.comwww.getdeco.com© Copyright 2019 Deco Enterprises, Inc. All rights reserved.