7
ENGLISH WIRELESS MOUSE 904-002

WIRELESS MOUSE€¦ · Congratulations on your purchase of the Rock Candy Wireless Mouse! FEATURING ... If you have purchased a Rock Candy Wireless Keyboard, you can pair the keyboard

  • Upload
    vonhu

  • View
    219

  • Download
    2

Embed Size (px)

Citation preview

ENGLISH

WIRELESS MOUSE

904-002

Congratulations on your purchase of the Rock Candy Wireless Mouse!

FEATURING

ADVANCED FEATURES

• High definition optical mouse tracking • 30-ft range 2.4 GHz wireless technology• Multi-device shareable nano USB receiver • Plug and play user-friendly• Windows/Mac compatible • Bright, fun colors• Smooth glide action

• Advanced Power Saving Mode – The Rock Candy Wireless mouse will progress into different levels of power saving modes, extending the life of your batteries.• Switching Your Mouse ON/OFF – Extend the battery life and prevent your mouse from turning on when traveling or on-the-go. Follow these simple instructions to switch your mouse on or off: To turn on: slide the ON/OFF switch to the ON position. To turn off: slide the ON/OFF switch to the OFF position.

• Power Indication – When the mouse is switched to the ON position, the Low Battery LED will flash once and then remain off, indicating that your mouse is functional.

• Ability to Pair Your Mouse – Easily sync your Rock Candy Wireless mouse with multiple Rock Candy USB devices (see instructions below)

• Low Battery LED Indicator – Receive advance warning when the battery is beginning to lose charge. Includes the following indicator modes:

When reaching a low power state, the LED will blink slowly, allowing for additional time to replace batteries.

When reaching a critical power state, the LED will blink rapidly and the mouse will not be operational until batteries are replaced.

Note: The LED will continue flashing when the user moves the mouse and will flash 10 times before it turns off.

ENG

LISH

IMPORTANT / CAUTION STATEMENTSChoking Hazard: Contains small parts that can be a choking hazard for children under 3 years old.

Do not mix different battery types. Risk of explosion may occur.

Do not mix new and old batteries.

Do not immerse this product in liquid.

Do not expose this product in extreme heat.

Do not use this product in extreme humidity.

Keep the batteries and USB receiver out of reach of children.

Modifications to this product could void your warranty and your right to operate this product by the FCC.1

Contents

• 1 Rock Candy Wireless Mouse • 1 USB Receiver• 2 AAA Batteries • 1 Quick Start Guide (QSG)

While pressing down on the battery cover embossed thumb grip (see below), slide the battery cover away from the mouse.

Insert two AAA alkaline batteries with the polarities as shown in the drawing below.

Slide the battery cover back into place. Plug the included USB receiver into any available USB port on your computer.

1

2

3 4

ENG

LISH

2

Connecting Your Mouse

ENG

LISH

3

Mouse Anatomy

Mouse FeetMouse Feet

Mouse FeetMouse Feet

LED Source ON/OFF Switch

Optical Sensor

Embossed Thumb Grip

Right Button

Low Battery LED Left Button

Scroll Wheel/Middle ButtonBattery Door

Pairing Your Mouse

Troubleshooting

Multi-Device Receiver Wireless Connection

The mouse USB receiver is already paired with the keyboard at the factory. However, if you have a replacement USB receiver, you will need to pair it with your mouse. To pair the mouse using the USB receiver, please follow these steps:

1) Ensure that the USB receiver is unplugged. 2) Press and hold the left, right, and middle button (the scroll wheel) at the same time for five seconds. 3) While holding the left, right, and middle buttons; immediately reconnect the USB receiver to your computer. 4) Continue to hold all three buttons for another five seconds, then release. 5) Your Rock Candy Wireless Mouse is now paired with the USB receiver.

The receiver can sync with multiple wireless Rock Candy Wireless USB devices (such as the Rock Candy Wireless Keyboard and another mouse), allowing you to free up a USB port on yourcomputer. If you have purchased a Rock Candy Wireless Keyboard, you can pair the keyboard to the mouse USB receiver by following these steps:

1) Disconnect the mouse USB receiver. 2) Press the “Esc” and “=” buttons together until the Low Battery LED lights solid on the keyboard. 3) Reconnect the mouse USB receiver. The LED will turn off, indicating that the keyboard has successfully paired with the mouse using the same USB receiver.

NOTE: Please use only the mouse USB receiver when pairing both mouse and keyboard together with the same USB receiver.

ENG

LISH

4

If the mouse is not working, please check for the following possible causes:

• Are the batteries installed using the correct polarity? • Is the USB receiver connected to your computer and the drivers finished installing? • If there is difficulty opening the battery cover, press down on the embossed thumb grip mark before sliding the cover away from the mouse. • If the computer is in sleep mode, and the mouse does not respond, simply click any button on the mouse to wake from sleep mode. Depending on the speed of your computer,it may take a few seconds to a few minutes to go from sleep to wake mode.

If you still experience problems and further issues arise, please contact PDP Customer Support at www.pdp.com or call toll-free (800) 331-3844 (USA and Canada only).

ENG

LISH

5

FCC STATEMENTS:

CAUTION: Changes or modifications to this equipment not expressly approved by themanufacturer could void the user’s authority to operate the equipment. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA STATEMENTS:

This device complies with Industry Canada licence RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Regulatory Statements

Warranty

2 year limited warranty. See www.pdp.com for details.

Maintaining Your Mouse

• Clean your mouse with a dry cloth only, preferably microfiber cloth, every other month.• Do not allow this product to get wet. • Do not leave this product near extreme heat.

© 2015 Performance Designed Products, LLC. Performance Designed Products, PDP, Rock Candy, Pick Your Flavor, Color is Expression, the flavor names and their respective logos are trademarks and/or registered trademarks of Performance Designed Products, LLC. All other trademarks are the property of their respective owners. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. All rights reserved.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must ac-cept any interference received, including interference that may cause undesired operation.

REV.A

WWW.PDP.COMwww.pdp.com/support

MADE IN CHINA

Mouse:Model No.: 904-002TFCC ID: X5B-904002TIC: 8814A-904002TRating: 3VDC/6mA

USB Receiver:Model No.: 904-002RFCC ID: X5B-904002RIC: 8814A-904002RRating: 5VDC/22mA

ENG

LISH

6

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

“Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillage radio électrique subi, mêmesi le brouillage est susceptible d’encompromettre le fonctionnement.

Legal

Regulatory Statements (continued)