Wireless Level IndicatorMODEL S207E

The Tank Unit bounces a sound wave off the water to detect the level and sends this to the Bench Unit. Simply press the button and see how full the tank is.

FULLY WIRELESS • SIMPLE TO INSTALLFOR ANY TANKS WITH DEPTH UP TO 4M (13’)

UP TO RANGE OF 300M (1000’)

www.aquatel.co.nz

LEVEL TECHNOLOGIES

How it worksThe S207E is a very effective way to know just how much fluid is in your tank. It is the worlds smartest fully wireless domestic Tank Fluid Indicator. It auto-updates to a small and stylish desktop indicator placed in your home.

By simply pressing a button on the interior bench unit, you see current fluid level in your tank. Warns of rapid fluid loss. Aquatel S207E will even tell you when to replace the batteries. Easy DIY installation – can be installed in less than 10 minutes.

Aquatel NZ Ltd, PO Box 225, Orewa, Auckland, New Zealand Email: sales@aquatel.co.nz

Water TankLevel Indicator

0

CURRENT LEVEL

%

100 – Re-calibrating

– Tank battery low

– Bench battery low

– Internal failure

– Transponder cannot range

– Rapid water loss

– Low �uid level

%

S207E

Water TankLevel Indicator

0

CURRENT LEVEL

%

100%

S207E

Individually Security coded

433 MHz (Aus/NZ/Europe)

300m* (1,000’)

Specifications : S207E

Tank Unit Display Unit

• Antenna: PCB Loop Type • 4 x AA Batteries required • 92mm W x 73mm D x 50mm H (3-5/8”W x 2-7/8”D x 2”H)

External Power Jack 6V DC

Detection Range0.1m to 4m

(4”-13’)

1/4 Wave WhipAntenna

* Range shown is line of sight. Objects between units will reduce range

• Use on any (water, diesel, septic)• 4 x AA Alkaline batteries (supplied) • ¼ Wave Whip Antenna• 135mm diameter x 80mm H (5 3/8” D x 3 1/8” H)

• Up to 2km (1 1/4 mile) when used with AQ433-6 Antenna

- Temperture range: -10 to +60˚C (14-140˚F)- Approvals: AS/NZS 4268:2003, 1:2005 CE- Housing: ABS Plastic- Circuit Boards: ROHS compliant- Long battery life (70,000 updates)

LEVEL TECHNOLOGIES