Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
RHB 300 Wireless 360° High Bay Occupancy Sensor
Features
Key Features:
��360° coverage with up to 60 foot reach ��Coverage area may be adjusted with plastic lens covers that snap to the front or the sensor��3 pyroelectric detectors with 1416 switching zones provides better detection for high bay applications��915 MHz wireless technology makes creating lighting zones easy and convenient ��Precision molded lens��Automatically adjusts to temperature changes keeping sensi-tivity and coverage consistent��Light level feature allows lighting to remain off during daylight regardless of occupancy��Built-in surge protection with auto-reset
The RHB 300 Wireless High Bay Occupancy Sensor provides occupancy based lighting control in high bay applications and communicates wirelessly to other devices to create groups (lighting zones).
The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the RHB 300 is able to achieve 1416 switching zones.
STEINEL wireless devices are grouped together via a DIP switch address. All devices in a group have the same DIP setting, forming a control zone. Any wireless sensor will switch all devices in a group ON when triggered.
Applications
High bay open areas where 360 degree coverage with wireless group control is desired, such as in warehouses, distribution centers, gymnasiums, and loading docks
Passive infrared technology
360° coverage
915 MHz wireless technology
Fixture or junction box mounting
Fixture or J Box Mount
www.steinel.net (800) 852-4343
Project Name:
Location:
RHB 300 SpecificationsRHB 300 PN 64231
Voltage 120/230/277 VAC, 50/60 Hz
Load rating 120 VAC: 0-800 watt ballast, Tungsten, 1/4 hp230/277 VAC: 0-1200 watt ballast
Sensing technology
Passive Infrared (PIR)
Time delay setting 35 seconds to 30 minutes
Light level setting .2-200 footcandles2 - 2000 lux
RF Technology 915 MHz, up to 100 feet of safe wireless connection
Environment IP20 rated, -4°F to +122°F, -20°C to +50°C
Coverage 360°, up to 22 ft (6.7 m) radial reach, up to 60 ft (18.2 m) tangential reach
Sensors 3 dual element infrared pyroelectric detectors
Lens design 1416 switching zones
Dimensions (WxHxD)
3.9 x 3.9 x 2.6 in, 99 x 99 x 66 mm, nipple length .62 in (15.75 mm)
Warranty 5 years
Certifications C-UL-US Listed, RoHS Compliant, FCC & IC Compliant
120/ 230/ 277 VAC50/60 Hz
Passive infrared technology
360° coveragemax 60 ft.
Voltage
PIR
RHB 300 Wireless 360° High Bay Occupancy Sensor
Lens covers can be used to adjust the RHB 300’s coverage as needed. The covers are plastic and snap to the front of a sensor.
Typical mounting height is 8 to 45 feet. Maximum reach is 22 feet radial and 60 feet tangential. Coverage may vary depending on mounting height and environmental conditions.
Coverage Adjustment
Coverage
Group 1 Group 2EM 1-1
LP 1-1
EM 1-2
LP 1-2
ON DIP
1 3 4 52
ON DIP
1 3 4 52
LP - Lighting Branch CircuitEM - Emergency Lighting Circuit
- Lighting Fixture- Night Light - RHB 300
- Lighting Zone/GroupLEGEND
Group 1 Group 2EM 1-1
LP 1-1
EM 1-2
LP 1-2
ON DIP
1 3 4 52
ON DIP
1 3 4 52
LP - Lighting Branch CircuitEM - Emergency Lighting Circuit
- Lighting Fixture- Night Light - RHB 300
- Lighting Zone/GroupLEGEND
LOAD
LINE (BLACK)
NEUTRAL (WHITE)
NEUTRAL
HOT
LOAD (RED)
Detection lens
Light level setting
Time delay DIP switch
Group address DIP switch
Tim
e ON
1 2 3 4
Low
High
LowHigh
Tim
e ON
1 2 3 4Low
High
ON
DIP
12
34
5
LC4 reduced range lens cover
LC5 180° half moon lens cover
10203040
LC3
40 ft
50 5040 4035 ft22 ft 22 ft
35 ft
10203040
40 ft
LC4
30 ft22 ft 22 ft
30 ft
10203040
40 ft
LC4
30 ft22 ft 22 ft
30 ft
10203040
LC5
40 ft
35 ft
22 ft
40 50
The STEINEL wireless lighting control system enables group control of lighting fixtures. In this example, the RHB 300 sensors are set up into two groups (or lighting zones). Detection by one sensor in a group, activates lighting for all the sensors in that group.
M-04201-1
Tim
e ON
1 2 3 4
Low
High
LowHigh
Time Delay DIP Switch
1
ON
ON
OFF
ON
ON
OFF
OFF
OFF
N/A
2
ON
OFF
ON
OFF
ON
ON
OFF
OFF
N/A
3
ON
OFF
ON
ON
OFF
OFF
ON
OFF
N/A
4
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Time
35 sec
1 min
5 min
10 min
15 min
20 min
25 min
30 min
override
10203040
LC5
40 ft
35 ft
22 ft
40 50
www.steinel.net (800) 852-4343
Project Name:
Location:
RHB 300 SpecificationsRHB 300 PN 64231
Voltage 120/230/277 VAC, 50/60 Hz
Load rating 120 VAC: 0-800 watt ballast, Tungsten, 1/4 hp230/277 VAC: 0-1200 watt ballast
Sensing technology
Passive Infrared (PIR)
Time delay setting 35 seconds to 30 minutes
Light level setting .2-200 footcandles2 - 2000 lux
RF Technology 915 MHz, up to 100 feet of safe wireless connection
Environment IP20 rated, -4°F to +122°F, -20°C to +50°C
Coverage 360°, up to 22 ft (6.7 m) radial reach, up to 60 ft (18.2 m) tangential reach
Sensors 3 dual element infrared pyroelectric detectors
Lens design 1416 switching zones
Dimensions (WxHxD)
3.9 x 3.9 x 2.6 in, 99 x 99 x 66 mm, nipple length .62 in (15.75 mm)
Warranty 5 years
Certifications C-UL-US Listed, RoHS Compliant, FCC & IC Compliant
STEINEL Wireless Lighting Control
Wiring
The RHB 300 is mounted directly to a lighting fixture. The EM1 Extender Module is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture.
EM1
Mounting
Settings