HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 191

BLOCK SETS, HOOKS, SHACKLES, CLIPS

SLACK BLOCK SETS

Block Sets, H

ooks, Shackles &

Clips

6 X 19 IWRC

Capacity in Tons

Cat. No. Dia. Vertical Choker Basket

4-LENGTH-6X19 1/4 .65 .48 1.36-LENGTH-6X19 3/8 1.4 1.1 2.97-LENGTH-6X19 7/16 1.9 1.4 3.98-LENGTH-6X19 1/2 2.5 1.9 5.19-LENGTH-6X19 9/16 3.2 2.4 6.410-LENGTH-6X19 5/8 3.9 2.9 7.812-LENGTH-6X19 3/4 5.6 4.1 1114-LENGTH-6X19 7/8 7.6 5.6 1516-LENGTH-6X19 1 9.8 7.2 20

WIRE ROPE SLINGS SPECIFY LENGTH WHEN ORDERING

• These light, anodized steel shell blocks are fitted with snubbing hooks to hold the load in any position.

• Sheaves are aluminum alloy with all-bronze bushings. • Available with snap hooks or guarded snap hooks.• Available with anchor hook or swivel hook, which

both fit under insulator and engage pin on cross arm.• Rope is 3/8" x 30' three-strand poly which can be

spliced to blocks when specified. Other types of ropes available upon request.

• Max. safe work load is 750 lbs. (All sets)

30' Handline Sets with Standard Snap Blocks

267 268

Cat. No. Rope Block Style Hook 1802-30-SR Poly Std Blocks (267 & 268) Anchor

1802-30S-SR Poly Std Blocks (267 & 268) Swivel 180230SSRN Nylon Std Blocks (267 & 268) Swivel

30' Handline Sets with Guarded Snap Blocks

H267 H268

Cat. No. Rope Block Style Hook

H1802-30-SR Poly Guarded Blocks(H267 & H268) Anchor

H1802-30S-SR Poly Guarded Blocks (H267 & H268) Swivel

H180230SSRN Nylon Guarded Blocks (H267 & H268) Swivel

Replacement RopeCat. No. Description

48502 3/8" x 30' three strand poly ropeNY06-(length) 3/8" three strand nylon rope (specify length)

258 Anchor Hook 259

Swivel Hook

Angle Factor90°85°80°75°70°65°60°55°50°45°40°

1.9962.9848.9659.9397.9063.8660.8192.7660.7071.6428

6 X 37 IWRC(more flexible)

Capacity in Tons

Cat. No. Dia. Vertical Choker Basket

4-LENGTH-6X37 1/4 .65 .48 1.36-LENGTH-6X37 3/8 1.4 1.1 2.97-LENGTH-6X37 7/16 1.9 1.4 3.98-LENGTH-6X37 1/2 2.5 1.9 5.19-LENGTH-6X37 9/16 3.2 2.4 6.410-LENGTH-6X37 5/8 3.9 2.9 7.812-LENGTH-6X37 3/4 5.6 4.1 1114-LENGTH-6X37 7/8 7.6 5.6 1516-LENGTH-6X37 1 9.8 7.2 20

CAUTION: Do Not Exceed Rated Capacities

Sling capacity decreases as the angle from horizontal decreases. Angles of less than 30° are not recommended. A sling capable of lifting 1,000 lbs in a 90° vertical basket hitch, can only lift 866 lbs at a 60° angle. To determine the reduced rating, multiply the sling’s rating by the appropriate factor in this table.

Add "SCH" to Cat. No. for a Sliding Choker Hook

BLOCK SETS, HOOKS, SHACKLES, CLIPS

DOUBLE/TRIPLE SHEAVE BLOCKS

ALUMINUM BLOCKS UTILITY TOWER BLOCK

HANDLINE SETS

NYLON BLOCKS

303J 303M 303KThis light weight, high strength

tower block is made of rugged aluminum alloy. The sheave runs on Bronze Oilite bearings.

A quick opening cross head makes loading lines easy. Line capacity is 7/8”. Safe work load is 2500 lbs.B

lock

Set

s, H

ooks

, Sh

ackl

es &

Clip

s

*Dimensions provided are actual length, not the lift length.Example: A 100' handline set provides 50' of lift.

Handline Set comes with:• 1/2" or 5/8" hi-power three strand rope• (1) 303J Aluminum Block OR

(1) 3550 Nylon Block• (1) HL1 Double Eye Hook spliced on

one end• (1) 470 Snap spliced on other end

Cat. No. Description3550 Nylon Block

3550-1 Nylon BlockA30234 Safety Latch KitA30069 Screw Pin with Keeper

Cat. No. Description303J Aluminum Block303M Aluminum Block303K Aluminum Block6221 Safety Latch Kit

6244-1 Pin & Lanyard

Cat. No. Description404J Utility Tower Block6365 Repl. Pull Pin & Keeper

7506495 Repl. Latch Kit

Block and sheave constructed of rugged nylon fiberglass rein-forced high dielectric material. 1000 lb working load limit. 5/8" diameter line capacity

3550 3550-1 This light weight, heavy duty aluminum alloy block. Aluminum alloy sheave runs on sealed ball bearings. Line capacity is 5/8" dia. Safe working load is 1000 lbs. (at a 3-1 safety factor).

• Bodies are made from high impact, dielectric thermoplastic material

• Hooks have full swivel• Sheaves are made with fiberglass

reinforced nylon material• Working load limit: 2,000 lb

Cat. No. Description11052 2 Sheave Block11051 3 Sheave Block

404J

Handline Set w/ Alum. Block

Handline Set w/ Nylon Block Dimensions*

HSJ08HP-75 HSN08HP-75 1/2" x 75' HSJ08HP-100 HSN08HP-100 1/2" x 100'HSJ08HP-125 HSN08HP-125 1/2" x 125'HSJ08HP-150 HSN08HP-150 1/2" x 150'HSJ10HP-75 HSN10HP-75 5/8" x 75'HSJ10HP-100 HSN10HP-100 5/8" x 100'HSJ10HP-125 HSN10HP-125 5/8" x 125'HSJ10HP-150 HSN10HP-150 5/8" x 150'

Handline Set with Alum. Block

11051 11052

Cat. No. 50061This rope snatch block with an integrated friction bar is used for lowering loads, snubbing loads, and raising loads. It al-lows you to handle loads with greater control. When lowering loads, tension is transferred from the worker to the block. Replaces standard handline blocks, parted blocks, and various snatch blocks.

OX BLOCK

192HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

BLOCK SETS, HOOKS, SHACKLES, CLIPS

193

BLOCK SETS, HOOKS, SHACKLES, CLIPS

LARGE LOCKING LADDER SNAP

SPREADER HOOKCat. No. 3032

This drop-forged,welded hook is designed for use with harnesses. Tensile strength is 2500 lbs.

POLYMER BUCKET HOOKS

Cat. No. 47-222PVC Bucket

hook with a 3” throat for buckets with wide lip. Sold individually.

SWIVEL SNAP HOOKCat. No. 2012Light duty cast zinc hook.Max. safe load is 150 lbs

H.D. SNAP HOOKCat. No. 443AThis drop-forged hook has fixed eye at 90° to hook. Max. safe load is 1500 lbs.

Cat. No. 1706This drop-forged snap hook has locking latch. Works with one hand. Max. safe load is 5,000 lbs.

SWIVEL HOOKCat. No. 259Drop-forged swivel hook. Max. safe load is 750 lbs.

ANCHOR HOOKCat. No. 258

Drop-forged anchor hook. Max. safe load is 750 lbs.

Cat. No. HL22” diameter handline ring.350 lb capacity

SWIVEL SNAP HOOKCat. No. 470

This drop-forged swivel hook has quick acting plunger-style latch. Max. safe load is 750 lbs.

DOUBLE EYE HANDLINE HOOKS

Cat. No. M1849Safe work load 500 lbs.

Cat. No. HL55112-3/8" high

impact polymer hook. Tests show this hook to be virtually unbreakable. Sold individually.

LOCK SNAP HOOK

HANDLINE RING

HANDLINE BLOCKSThese sturdy handline blocks have aluminum alloy frames and forged steel hooks & eyes. Large axles with high-load rated bearings support the fiber-plastic sheave. For 1/2” rope. Max safe load: 450 lbs.

Cat. No. A151-2with Swivel Safety

Hook

Cat. No. A151-Ewith Swivel Eye

Cat. No. HL1Safe work load 500 lbs.

Cat. No. 47-500PVC Bucket

hook with a 3" throat. Sold individually.

DOUBLE/TRIPLE SHEAVE BLOCKS

Block Sets, H

ooks, Shackles &

Clips

Cat. No. 2401-3Fits 3" bucket

lip. Yellow, 11/16" polymer. Maintains its strength through extreme temperatures.

PVC BUCKET HOOKS

Cat. No. 31301Steel hook is designed

to snap over ladder rungs or reinforcement bars. Max safe load is 5,000 lbs. 1” eye, 9 3/4” O.A. length, 2.5” opening, 1lb. 8oz.

BLOCK SETS, HOOKS, SHACKLES, CLIPS

Cat. No. Safe Load

Throat Opng

Eye ID

Wgt(lb)

Latch Kit

320AN-1 1 Ton .94” .75” .6 1096325320AN-1.5 1.5 Ton 1.03” .91” .9 1096374320AN-2 2 Ton 1.06” 1.12” 1.4 1096421320AN-3 3 Ton 1.22” 1.25” 2. 1096468320AN-5 5 Ton 1.5” 1.56” 4.3 1096515320AN-7 7 Ton 1.88” 2” 8.3 1096562320AN-11 11 Ton 2.25” 2.44” 15 1096609

Throat opening is less w/safety latchCarbon hooks available - lower capacity

ALLOY EYE HOOK

WINCH LINE HOOK ALLOY SWIVEL HOOK

QUICK LINK

WIRE ROPE CLIPS

GALVANIZED SNAP HOOK

Cat. No. Safe Load

Throat Opng

Eye ID

Wgt(lb)

Latch Kit

S322AN-1 1 Ton 15/16” 1-1/4” .75 1096325S322AN-1.5 1.5 Ton 1” 1-1/2” 1.25 1096374S322AN-2 2 Ton 1-1/16” 1-3/4” 2.25 1096421S322AN-3 3 Ton 1-7/32” 1-3/4” 2.30 1096468S322AN-5 5 Ton 1-1/2” 2” 4.96 1096515S322AN-7 7 Ton 1-7/8” 2-1/2” 10.29 1096562S322AN-11 11 Ton 2-1/4” 2-3/4” 19.40 1096609S322AN-15 15 Ton 2-1/2” 3-1/8” 23.25 1096657

Throat opening is less w/safety latchCarbon hooks available - lower capacity

Cat. No. Load Limit

Synthetic Rope Size

Wgt(lb)

Latch Kit

S3319-15 1.63 Ton 9/16” - 5/8” 4.2 1096468S3319-25 2.5 Ton 3/4”- 13/16” 8 1096515S3319-45 4.5 Ton 7/8”- 1” 15 1096562

Winch line hook comes with protective spool & shield

SCREW PIN ANCHOR SHACKLE

To order galvanized, replace prefix S with G (example: G209-

04).

Cat. No.

Stock Dia.

Safe Load

Inside Width at Pin

S209-04 1/4” 1/2 T 1/2”S209-05 5/16” 3/4 T 17/32”S209-06 3/8” 1 T 21/32”S209-07 7/16” 1-1/2 T 23/32”S209-08 1/2” 2 T 13/16”S209-10 5/8” 3-1/4 T 1-1/16”S209-12 3/4” 4-3/4 T 1-1/4”S209-14 7/8” 6-1/2 T 1-7/16”S209-16 1” 8-1/2 T 1-11/16”S209-18 1-1/8” 9-1/2 T 1-13/16”S209-20 1-1/4” 12 T 2-1/32”S209-22 1-3/8” 13-1/2 T 2-1/4”

Blo

ck S

ets,

Hoo

ks,

Shac

kles

& C

lips

Stock Dia.

O.A. Length

Throat Opening

Eye I.D.

Safe Load

7/16" 4" 3/4" 3/4" 750 lb9/16" 4-3/4" 13/16" 1-1/8" 1,000 lb

Cat. No. G3315-(dia.)

Cat. No. Stock O.D.

Throat Opening Length O.A.

SWLT7645136 5/16" 5/16" 2-15/16" 1,760 lbT7645146 3/8" 3/8" 3-3/16" 2,200 lbT7645156 1/2" 9/16" 4-/4" 3,300 lb

Clip & Rope Size

Pack per

Carton

Min. No. of Clips

Required1/4" 100 25/16" 100 23/8" 100 27/16" 50 21/2" 50 509/16" 50 505/8" 50 503/4" 25 4

Cat. No. G450-(size)

194HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

Ref No. Cat. No. Style Block

SizeRope Size

SWL lbs

Wgt lbs

Wood Shell Blocks w/Self Lube Bronze Bushed

1

HS21B-4 Single Sheave

4" 1/2" 1,000 1.75HS21B-6 6" 3/4" 1,800 5HS22B-4 Double

Sheave4" 1/2" 1,400 3

HS22B-6 6" 3/4" 2,500 8.5HS23B-4 Triple

Sheave4" 1/2" 1,800 4

HS23B-6 6" 3/4" 3,200 11.5

Steel Shell Blocks w/Self Lube Bronze Bushed

2

HS301B-4 Single Sheave

4" 1/2" 1,100 2.25HS301B-6 6" 3/4" 2,000 5.5HS302B-4 Double

Sheave4" 1/2" 1,600 3.75

HS302B-6 6" 3/4" 3,300 9.25HS303B-4 Triple

Sheave4" 1/2" 2,200 5

Drop Link Blocks w/Self Lube Bronze Bushed

3T385B-6 Wood Shell 6" 7/8" 2,400 7T385B-8 8" 1" 4,800 13

4T390B-6 Wood Shell 6" 7/8" 2,400 7T390B-8 8" 1" 4,800 13

HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 195

BLOCK SETS, HOOKS, SHACKLES, CLIPSBLOCK SETS, HOOKS, SHACKLES, CLIPS

ROPE BLOCKS

2

3 4

5 6

7 8

1

Ref No. Cat. No. Style Block

SizeRope Size

SWL Ton

Wgt (lbs)

Safety Latch

Snatch Block w/Self-Lube Bronze Bearings

5H418BB-6 Single

Sheave6” 5/8”-3/4” 8 27 1096562

H418BB-8 8” 5/8”-3/4” 8 33 1096562

6H416BB-6 Single

Sheave6” 3/4”-7/8” 12 26 1096609

H416BB-8 8” 3/4”-7/8” 12 33 1096609Heavy Duty Block w/Self-Lube Bronze Bearings

7H420BB-6 Single

Sheave6” 3/4”-7/8” 12 40 1096609

H420BB-8 8” 3/4”-7/8” 15 51 1096609

8 L-45-H Single Sheave 4” 3/8”-1/2” 5 13 1096468

“H” Fitting“S” Fitting

Specify desired fitting prefix when ordering

Block Sets, H

ooks, Shackles &

Clips