Window Replacement Hardware - Strybuc

180 FAX: 610-534-3202

Window Replacement Hardware

2011 PGI©

Part # Hand Finish36-158-1 Shown Bronze36-158-2 Shown Gold36-159-2 Opposite Gold

Other finishes available. Handle shown in locked position.

Part # Hand Finish36-160-1 Shown Bronze36-161-1 Opposite Bronze36-161-2 Opposite Gold


Lever Operators

Part # Hand Finish36-168-1 Shown Bronze36-168-2 Shown Gold36-168-3 Shown White36-169-3 Opposite White36-168-5 Shown Bright Brass


Part # Hand Finish36-153-1 Shown Bronze36-157-1 Opposite Bronze36-153-2 Shown Gold36-157-2 Opposite Gold36-153-3 Shown White36-153-5 Shown Bright Brass


Part # Hand Finish36-162-1 Shown Bronze36-163-1 Opposite Bronze36-162-2 Shown Gold36-163-2 Opposite Gold36-162-3 Shown White

36-163-75 Opposite CopperOther finishes available.

Handle shown in locked position.

Note: See lever operator brackets on page 197.

Part # Hand Finish36-166-1 Shown Bronze


Part # Hand Finish36-164-1 Shown Bronze36-164-87 Shown Gold


181TOLL FREE: 800-352-0800


2011 PGI©

The New Electronics Package provides many new features to enhance a home's comfort and its owner’s peace of mind.

• Quick and Easy Installation of the skylight is possible when motor system is pre-installed and programmed by sky-light manufacturer at their facility. The electrician needs only to connect line voltage power and the skylight is completely ready for operation - no further set up would be required by the installer or homeowner!

• Power Conversion built right into the skylight mounted con-trol package which accepts direct connection of line voltages from 100 to 240 VAC at 47 to 440 Hz. No more transformers to complicate and add expense to the installation.

• Power Blind System Compatible. Centralized window control is now possible with Sentry II’s ability to accept and control most 24 VDC power blind systems. The Sentry II RF remote or wall switch controls both skylight and blind motors for convenient, centralized control.

• Power Protected Memory eliminates the need to “reset” or retrain the control system after a power outage. Once the installation is complete, the motor never needs further service or adjustments - even after prolonged power outages!

• RF Remote Compatibility built into all motor control pack-ages as a standard feature. Simply order the optional remote to add new and exciting control capability for the homeowner.

• Rain Sensor, standard on all kits, automatically closes the skylight at the first sign of moisture. Corrosion resistant sensor decreases mechanisms cleaning requirements and extends service life.

• Easily Adapts for new construction or retrofit applications. Please consult with your electrical contractor for a retrofit evaluation.

• ETL Listed and CE Approved. Meets all requirements for Class II installations.

• Safety - Automatic Motor Reversal has been engineered into the system which is intended to reverse the motor should an obstruction stop the skylight while closing. In addition, a screen interlock is provided which, when properly installed, electrically disconnects the motor when the screen is removed. These features are intended to help prevent per-sonal injury which could result from reaching into the skylight area during its operation.

• Synchronized Operation of multiple motors is now standard on the HS motor system. The same Sentry II HS motor system can now be used on single motor applications or it can be ganged with up to four motor units on a large single skylight. Multiple motors on a single skylight add stability and capacity.

• Awning Windows – Can also be fitted with the Sentry II HS Motor System. Skylight hardware systems work great on awning windows with butt hinges.

• Building Automation Systems can easily be tied into the control electronics for virtually limitless ventilation possibilities.

Motorized Operators for Skylights

Sentry II HS Motorized Skylight System & Synchronous Skylight Motor Kits

39-634

SENTRY II HS CAPACITYTruth’s Sentry II HS for heavy skylights is load rated at 80 lbs. at the chain. This equates to a total skylight hatch weight of 160 lbs. Sentry II HS power skylight system is rated at 50 watts.

Sentry II HS for heavy skylightsOrder 1 per skylight

- 39-634 - Sentry II HS System- 39-637-X - Cover (X denotes finish code)

Order 1 Hand Held Remote and/or Wall Switch

- 39-640 - Hand Held RF Remote- 39-642 - Wall Switch

Introducing Truth’s next generation of power window system...Sentry II HS® for heavy skylights. Based on the powerful and reliable mechanics from our previous SkySentry® Motorization Systems, they've added a new digital electronics package with built in power

conversion to take this system to a whole new level of service and reliability.

39-642Switch Only

39-640Remote Only

39-637-Specify ColorCover Only

182 FAX: 610-534-3202


2011 PGI©

Motorized Operators for Casement & Awning Windows

Sentry II WLS Motorized Power Window & Skylight System

39-635

Sentry II WLS Motorized Power Window & Skylight System for Pella Windows

39-636

The New Electronics Package provides many new features to enhance a home's comfort and its owner’s peace of mind.

• Retrofits onto casement and awning windows and light skylights operated with a hand crank manufactured by Truth Hardware. The motor system drives the same input the handle is attached to.

• Power Conversion built right into the wall mounted control package which accepts direct connection of line voltages from 100 to 240 VAC at 47 to 440 Hz. No more transformers to complicate and add expense to the installation.

• Power Blind System Compatible. Centralized power win-dow system control is now possible with Sentry II’s ability to accept and control most 24 VDC power blind systems. The Sentry II’s remote and wall switch can be used to control both window and blind motors for convenient, centralized control.

• Power Protected Memory eliminates the need to “reset” or retrain the motor after a power outage. Once the installation is complete the motor never needs further service or adjust-ments – even after prolonged power outages!

• RF remote compatibility built into all motor control pack-ages as a standard feature. Simply order the optional remote to add new and exciting control capability for the homeowner.

• Rain Sensor - standard with all kits, automatically closes the window or skylight at the first sign of moisture. Corrosion resistant sensor decreases maintenance cleaning require-ments and extends service life.

• No Special Preparation is required by the window or sky-light manufacturer. The kits are suitable for new construction or retrofit applications. Please consult with your electrical contractor for a retrofit evaluation.

• ETL Listed and CE Approved. Meets all requirements for Class II installations.

• Safety - Automatic motor reversal has been engineered into the system which is intended to reverse the motor should an obstruction stop the window while closing. In addition, a screen interlock is provided which, when properly installed, electrically disconnects the motor when the screen is removed. These features are intended to help prevent per-sonal injury which could result from reaching into the window area during its operation.

• Motorized Sash Locks are available for use with the WLS system for casement and awning windows.

• Building Automation Systems can easily be tied into the control electronics for virtually limitless ventilation possibilities.

SENTRY II WLS CAPACITY• When used on light skylights, Truth’s Sentry II WLS is load rated at 40 lbs at the chain. This equates to a total skylight hatch weight of 80 lbs.• When used on casement windows, the Sentry II WLS is designed to work on all window systems meeting the AAMA-101 hard-ware load requirements.• When used on awning windows, the Sentry II WLS is designed to work on awning windows with a properly sized counter-balance hinge and operator. (Consult awning operator speci-fications).

Sentry II WLS for windows and light skylightsOrder 1 each per window:

- 39-635 - Sentry II WLS System

- 39-638-X - Cover (X denotes finish code)

Order 1 Hand Held Remote (optional):

- 39-640 - Hand Held RF Remote

Introducing Truth’s Next Generation of Power Window Systems... Sentry II WLS® for Windows and Light Skylights. Based on the powerful and reliable mechanics from their previous motorization system, they've added a new digital electronics package with

built in power conversion. This New Sentry II WLS System truly takes over where Truth’s Sentry 2000® left off.

39-640Remote Only

39-638-Specify ColorCover Only

183TOLL FREE: 800-352-0800


2011 PGI©

Motorized Operators for Skylights, Casement & Awning Windows

Truth Hardware’s new Marvel™ power operator system for windows and skylights proves that simpler can be better. Challenged with the expectation of window and skylight manufacturers with providing a small and sleek motorized system that is simple to install, easy to operate and above all affordable—Truth is confident that the Marvel System is the answer.

NEW Marvel™ Sleek and Petite Motorized Operating System

Easy to Install and OperateWith installation templates provided in each kit, the mounting brackets used to help secure the Marvel Operator to the center of your window makes this system one of the easiest systems to install.• Three styles of mounting brackets accompany this product to allow for easy mounting.• Can be face-mounted or mounted to applications with sills.• Rated to lift skylight sashes that weigh up to 90 lbs.• Rated for use in outdoor applications only.• Controlled using a standard, single pole / double throw, center off momentary contact switch. (Not Supplied)• Durable double link chain produces 9.5” of chain travel.• Electronic limit switch controls the opening position while the closing position is controlled through an internal current sensing feature.• Users can operate multiple units from one control switch.

Snap Bracket Type

Part # Truth # Finish39-760-1 42.90.03.100 Bronze

39-760-32 42.90.38.100 White (Weathershield)

Pull Pin Bracket Type

Part # Truth # Finish39-789-1 42.90.03.101 Bronze

39-789-32 42.90.38.101 White

Three styles of mounting brackets to allow for easy mounting

Durable double link chain

No transformer required. Operates from 110 volt household current.

Note: When used on awning windows, the Marvel System is designed to work on awning windows with a properly sized counter balance hinge such as Truth 13 series or 34 series hinges.

184 FAX: 610-534-3202


2011 PGI©

Roto Invisible Manual and Motorized Skylight Operator Systems

39-782WTop cover motorized kit with rain sensor and cover.

WhitePella

39-781Deluxe Electronic skylight system control unit. White

• Operates up to 4 roof windows or shades• 5 Pre programmed opening positions• Easy touch Keypad installs on wall• Battery backup in case of power failure• All necessary controls included

39-759SNDMotorized Skylight conversion kit. Converts manual

operator to a motorized system. Includes rain sensor, remote control and adapter. Sandstone

Part # Color36-536SND Sandstone

36-536W WhiteManual skylight operator with round end connector.


36-552W WhiteReplacement electric operator cover only.

39-808Star Sprocket

39-803Motorized skylight conversion kit rain sensor only.

39-792Mounting bracket only for round

end connector. White


36-560W WhiteBase assembly for manual and motorized

skylight operators with round end connector.

39-833Control unit electric key pad only.


37-235W WhiteHandle for manual skylights.

39-838Mounting bracket pin for round end connector. White

39-492Eyelet with hex spline

Sandstone

39-857

185TOLL FREE: 800-352-0800


2011 PGI©

39-94Hex Ball Drive

39-95Hook Drive

Part # Color39-100-1 Bronze39-100-3 White

Hex Ball Adapter

Part # Length39-388 12"39-416 9"

Chain Assembly for Skylight Operator with Bracket & Pin

Manual Skylight Operators

Angle DrivePart # Color

36-342-1 Bronze

36-342-3 White

Straight DrivePart # Color

36-345-1 Bronze

36-345-3 White

Motorized Skylight Accessories


39-638-35 Champagne39-638-7 Aluminum

Cover for Sentry II WLSMany Finishes Available

Part # Color39-97 Unpainted

39-97-1 Bronze39-97-3 White

Eyelet Adapter. Fits Truth

Skylight Accessories

Does not include handle.To order handle, see chart

on page 202.

Add Value to Your Operable SkylightThe Truth Skylight Operator System offers you the flexibility the marketplace demands, the quality your windows deserve, easy factory or field installation and a

means to keep your skylight hardware inventories both cost effective and efficient. The Truth Skylight Operator system is easy to install and compatible with wood, metal or vinyl framed skylights. Upgrading is easier and faster. Truth's special high gear reduction provides the low torque needed to lift a maximum sash weight of

160 pounds. Choose from two Manual Drive modules for the application that best meets your needs. Each easily mounts to the base module.

Description Part # Collapsed ExtendedPole with Hook 39-198 48" 73"Pole with Hook 39-102 74-1/8" 122-3/4"

Description Part # Collapsed ExtendedPole with Hex Ball 39-199 48" 73"Pole with Hex Ball 39-101 73-3/8" 122"

Hook Drive

Hex Ball Drive


Motorized Sash Lock

Angle Drive Module Straight Drive Module

Part # Color39-637-3 White39-637-7 Aluminum39-637-8 Chestnut Bronze39-637-9 Beige

39-637-15 Off WhiteCover for Sentry II HS

Many Finishes Available

900-155765/16" Universal Joint

Aluminum Finish

39-95SPHook Drive

Fits Truth

Fits Truth

Part # Color A39-118-1 Bronze 2"39-118-3 White 2"39-119-1 Bronze 4"39-119-3 White 4"

Handle Extension

Part # Color39-115-1 Bronze39-115-3 White39-115-7 Aluminum

Universal with Pole Ring


Universal

186 FAX: 610-534-3202


2011 PGI©

900-16844Pole Hook Hanger

White Bronze

900-16815White Bronze Pole Hook

900-16843Pole Hook

900-16845APole Hook Hanger

White Bronze

900-18245Rubber Tip Only

Part # Length900-16842-4 4'900-16842-6 6'900-16842-8 8'

Pole Hook AssemblyAluminum Tube with Rubber End

Part # Description39-672 CL Pole with AGR & HK - 5'39-673 CL Pole 5' Extension

Skylight Accessories

39-117Insert


Bearing Bracket

Velux Skylight Operator & Accessories

900-2165710" Split Arm Operator. Gold

900-216588" Split Arm Operator. Gold

37-172Short Handle for Velux Operators

37-171Long Handle for Velux Operators

900-22073Snap-In Metal Hex Adapter

37-180Hook Adapter for Skylight

39-755Hook for Velux Operator

187TOLL FREE: 800-352-0800


2011 PGI©

Sill Mounted Clerestory Pole

Clerestory Window Wands

Put those operable clerestory windows to energy-saving use with our 39-series clerestory extension crank. High mounted windows are excellent for capturing light while providing privacy, but they can also be “excellent” heat traps. It is now possible to vent the heat that rises to these areas as easily as opening any other window in the home.

It’s inexpensive and can easily retrofit to existing or new window installations. By simple removal of the existing crank handle and replacement with an adapter (see adapter selec-tion chart), the crank will open and close any operable clere-story window. It is not necessary to replace the current opera-tor. Remember that you will only need one clerestory crank to operate all windows at the same height.

The removable extension crank is available in many standard sizes for either sill or jamb mounted operators. Refer to the selection chart to the right. The standard finish for the crank is natural anodized aluminum.

Crank Handle Adapter Part # Fits

39-105PELLA Pella39-105A Andersen

39-105AB Andersen (New Style)

39-105Truth, Marvin, Caradco, Weather

Shield, Hurd, Biltbest, Eagle, Vetter, Others

39-105PT Getty, Peachtree39-105B Whitco H90

Used with Clerestory Window Wands

Jamb Mounted Clerestory Pole

Part # Location of Operator Crank Length Distance from Floor

39-104-3 Sill 3' 7'

39-527-3 Jamb 3' 7'

39-104-4 Sill 4' 8'

39-527-4 Jamb 4' 8'

39-104-5 Sill 5' 9'

39-527-5 Jamb 5' 9'

39-104-6 Sill 6' 10'

39-527-6 Jamb 6' 10'

39-104-7 Sill 7' 11'

39-527-7 Jamb 7' 11'

39-104-8 Sill 8' 12'

39-527-8 Jamb 8' 12'

39-104-9 Sill 9' 13'

39-527-9 Jamb 9' 13'

39-104-10KD Sill 10' 14'

39-527-10KD Jamb 10' 14'

39-104-12KD Sill 12' 16'

39-527-12KD Jamb 12' 16'

Part # Location of Operator Crank Length Distance from Floor

39-104M-4 Sill 4' 7'

39-527M-4 Jamb 4' 7'

39-104M-5 Sill 5' 8'

39-527M-5 Jamb 5' 8'

39-104M-6 Sill 6' 9'

39-527M-6 Jamb 6' 9'

39-104M-7 Sill 7' 10'

39-527M-7 Jamb 7' 10'

39-104M-8 Sill 8' 11'

39-527M-8 Jamb 8' 11'

39-104M-9 Sill 9' 12'

39-527M-9 Jamb 9' 12'

39-104M-10 Sill 10' 13'

39-527M-10 Jamb 10' 13'

Manual Window Wand Selection Chart Motorized Window Wand Selection Chart

Documents

Window Replacement Hardware - Strybuc