Why you need a welding helmet auto darkening kind for you?

Introduction:

Welding is a job which requires a lot of self care to be taken such as the use of gloves, welding clothing

and above all the head gear. The head gear is the most important of all due to the intense flash lights

producing UV and IR radiations which may affect your eyesight very quickly. Apart from this, there are

certain other advantages as well in using such equipment. There are a number of different types of

helmets available in the market and all have their different features, pros and cons. The welders must

critically evaluate all their factors and the applicability of the headgear in their specific job, before taking

any decision.

Why Auto Darkening over Others?

The lens is the first question that tingle your mind when taking your decision about protective welding

helmets. The darkening type is preferred over the passive one for a number of reasons. The following

are some of the main benefits that will help you to know about the effectiveness of having the auto

darkening type:

Higher Precision – Using the regular types, the operators must lift the faceplate in order to see

around when the operation is not on. He first require to position the welding rig in its proper

place before flipping down the faceplate again for beginning the operation. This may shift the

position of the lens slightly which may cause trouble. It is because the operator is not able to see

if there is a shift because of extreme dark nature of the standard lens. Precise placement is a

very critical consideration as any divergence may just ruin the entire project. The auto darkening

lens eliminates the need of shifting the faceplate unnecessarily for doing any other work during

welding.

Injury avoidance – The traditional helmets may lead to professional career ending and life

threatening injuries. The need of shifting the faceplate using standard types makes your neck

stiff and repeatedly doing this for time and time again may just lead to permanent injuries

where you might not be able to work again. The auto darkening helmets eliminates this need

which can cause immense neck strain.

Increased efficiency – The operators using the auto darkening lens do realize sometimes the

perks in the form of increased efficiency. According to the research produced on welding head

gears, an auto darkening lens enables the operator to give 30 percent more efficiency as

compared to the standard passive lens. The increased rate f efficiency and better productivity

comes when the welder shifts from one welding task to the next without too much of a hassle.

Value – The auto darkening type is an expensive option. But, when it comes to the nature of the

job, you must never compromise over quality. Just go for the best option particularly for the

health hazards that a standard option can cause. Considering all the perks and advantages, the

auto type comes as a good whole package.

The auto darkening type is by far the most appropriate option for the welders. You must carefully

evaluate all the pros of this type and compare it with other similar products. This will make you believe

that the former is the best ever option that you can ever have in choosing the right head gear for

welding purposes.

Refer: http://topwelders.com/best-miller-mig-welder/