2

Why PSA Type Heatless Air Dryer - Kolkata … - Heatless Air Dryer.pdfWhy PSA Type Heatless Air Dryer Dryer should be designed for getting quality of compressed air as per ISO 8573

  • Upload
    donhi

  • View
    222

  • Download
    2

Embed Size (px)

Citation preview

Why PSA Type Heatless Air DryerDryer should be designed for getting quality of compressed air as per ISO 8573 at the most economical costs. Generally for high-er quality dry air and Pressure dew point below 20C, Pressure Swing Adsorption type system is applicable. Heatless Air dryer is most economical PSA system to achieve the pressure dew point (-) 200C or less.

Working PrincipalHeatless dryer removes moisture with PSA system. Where Activated Alumina or Molecular Sieves used as desiccant. This system contains two vessels or tower with three nos. of Filters. Where pre and Oil filter are being used to arrest the physical moisture and oil and dust and the accumulated water and oil remove through Automatic Drain valve, which has fitted with filter housing. Then the compressed air passes through 3/2 way valve controlled through controller and it travels upwards through the desiccant tower. where one tower running as drying mode and where compressed air get dries during travel upwards through desiccant bed and lastly before reaching the area of application works the same passes through after filter, where the filter element arrest the fine dust particle (if any) carry over from the desiccant while other tower being regenerate with dry purge air and reactivate the desiccant for further process/ drying. After certain time air flow direction shifts. Before change the airflow gradually repressurizd and depressurized completed by air.

Model Inlet Flow(cfm)

Inlet Temp.(0C)

Max. working Pressure

Power Supply

Dew Point

End Conn. Approx weightKg.

ZHD 006 DA 60

Up

to 4

50 C

7 –

13 b

ar (g

)

230

V A

C, 5

0 H

z, 1

Ø

Min

us

400 C

Atm

osph

eric

¾” BSP (F) 150

ZHD 008 DA 80 1” BSP (F) 170ZHD 010 DA 100 1” BSP (F) 215ZHD 012 DA 120 1” BSP (F) 275ZHD 015 DA 150 1½” BSP (F) 320ZHD 020 DA 200 1½” BSP (F) 370ZHD 025 DA 250 2” BSP (F) 418ZHD 030 DA 300 2” BSP (F) 520ZHD 040 DA 400 2” BSP (F) 680ZHD 050 DA 500 3” NB 780ZHD 060 DA 600 3” NB 940ZHD 075 DA 750 3” NB 1110ZHD 100 DA 1000 4” NB 1270

For any other capacity contact factory. Specifications are subject to change without notification.

Technical Specification:

Refrigerated Air Dryer Compressed Air Filter Air Receiver Automatic Drain Valve

Other Range of Product

Why PSA Type Heatless Air DryerDryer should be designed for getting quality of compressed air as per ISO 8573 at the most economical costs. Generally for high-er quality dry air and Pressure dew point below 20C, Pressure Swing Adsorption type system is applicable. Heatless Air dryer is most economical PSA system to achieve the pressure dew point (-) 200C or less.

Working PrincipalHeatless dryer removes moisture with PSA system. Where Activated Alumina or Molecular Sieves used as desiccant. This system contains two vessels or tower with three nos. of Filters. Where pre and Oil filter are being used to arrest the physical moisture and oil and dust and the accumulated water and oil remove through Automatic Drain valve, which has fitted with filter housing. Then the compressed air passes through 3/2 way valve controlled through controller and it travels upwards through the desiccant tower. where one tower running as drying mode and where compressed air get dries during travel upwards through desiccant bed and lastly before reaching the area of application works the same passes through after filter, where the filter element arrest the fine dust particle (if any) carry over from the desiccant while other tower being regenerate with dry purge air and reactivate the desiccant for further process/ drying. After certain time air flow direction shifts. Before change the airflow gradually repressurizd and depressurized completed by air.

Model Inlet Flow(cfm)

Inlet Temp.(0C)

Max. working Pressure

Power Supply

Dew Point

End Conn. Approx weightKg.

ZHD 006 DA 60

Up

to 4

50 C

7 –

13 b

ar (g

)

230

V A

C, 5

0 H

z, 1

Ø

Min

us

400 C

Atm

osph

eric

¾” BSP (F) 150

ZHD 008 DA 80 1” BSP (F) 170ZHD 010 DA 100 1” BSP (F) 215ZHD 012 DA 120 1” BSP (F) 275ZHD 015 DA 150 1½” BSP (F) 320ZHD 020 DA 200 1½” BSP (F) 370ZHD 025 DA 250 2” BSP (F) 418ZHD 030 DA 300 2” BSP (F) 520ZHD 040 DA 400 2” BSP (F) 680ZHD 050 DA 500 3” NB 780ZHD 060 DA 600 3” NB 940ZHD 075 DA 750 3” NB 1110ZHD 100 DA 1000 4” NB 1270

For any other capacity contact factory. Specifications are subject to change without notification.

Technical Specification:

Refrigerated Air Dryer Compressed Air Filter Air Receiver Automatic Drain Valve

Other Range of Product