When you climb on board, you’re taking a step up.agromaskiner.se/wp-content/uploads/2015/10/Yanmar.pdf · TRACTORS / 324 Yanmar’s new 324 is the ideal sub-compact tractor choice

FEATURES

5-YEAR LIMITED POWERTRAIN WARRANTY

CAST IRON TRANSMISSION AND FRONT AXLE AND DUAL HYDRAULIC PUMP

TWO SIDE-BY-SIDE HYDROSTATIC TRANSMISSION PEDALS

FULL-FRAME CHASSIS

ELECTRO HYDRO INDEPENDENT PTO WITH ONE-TOUCH ON/OFF

221MULTI-PURPOSECOMPACT TRACTOR

TRACTORS / 221

INNOVATIVE DESIGN AND TECHNOLOGY

When you climb on board, you’re taking a step up.Don’t settle for less when you can have more. Yanmar’s new 221 is a fully outfitted tractor powered by our legendary 3-cylinder, liquid-cooled diesel engine. Featuring a newly redesigned operator platform, it’s built for comfort and ease of operation. Wide open sight lines and easy access to all instruments and controls make it more pleasurable to operate, while the full-frame chassis lessens vibration for a smoother ride. This is the step up you deserve.

SLEEK NEW LOOK. NOW IN RED. This tractor is built for the people who share our passion for the land and believe in working that land the right way. Not only is it built with a powerful, fuel-efficient engine to work all day, its sleek design is engineered for comfort and efficiency. Now in red. The color of passion. Because when it comes to a love of the land, we know you’re not alone.

BUILT TOGETHER TO WORK TOGETHER.Yanmar makes all the major drivetrain components — the engine, transmission and axles — in-house. And because they’re made together to work perfectly together, you get a hardworking machine with more useable horsepower, less power loss and a smoother, more comfortable ride. We call it Performance Link Technology™. You’ll quickly appreciate it as a tractor designed to work as hard as you do.

COMFORT AND PRODUCTIVITY BUILT RIGHT IN. A large, comfortable operator’s station provides easy access to all controls. The hydrostatic transmission, with convenient side-by-side pedals, allows you to get the job done regardless of terrain or the implement you are using. And, smooth hydraulic power steering delivers no kickback in the steering wheel for less operator fatigue. It’s a tractor the whole family can operate.

Yanmar 221 Tractor SpecificationsENGINE Maker Yanmar Model 3TNM74F Type 4 Cycle Inline, Water Cooled Diesel Number of Cylinders 3 Bore and Stroke in. (mm) 2.92x3.03 (74x77) Total Displacement cu. In. (L) 60.6 (0.993) Gross Power: EPA Regulation HP (kW) 21.5 (16.0) Net Power HP (kW) 19.4 (14.5) Rated Revolution RPM 3,200 Maximum Torque ft.lbs. (Nm) 39.4 (53.5) Battery 540 CCA Fuel Diesel

CAPACITIES Fuel Tank US gal (L) 6.1 (23.0) Engine Oil US qt. (L) 3.1 (2.9) Engine Coolant US qt. (L) 3.0 (2.8) Transmission Oil US gal (L) 4.1 (15.5) Front Axle Oil US qt (L) 3.17 (3.0)

DIMENSIONS in. (mm) Overall Length (with 3-Point Hitch) 102.1 (2,594) Overall Width (with R4 Tires) 47.3 (1,200) Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 82.3 (2,090) Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 66.3 (1,683) Overall Height (with R4 Tires, Top Of Steering Wheel) 51.1 (1,299) Wheel Base 57.9 (1,400) Minimum Ground Clearance (with R4 Tires) 6.4 (163) Tread (with R4) Front: 35.2 (894), Rear: 35.2 (894)

WEIGHT lb. (kg) (with ROPS, R4 Tires) 1,537 (697)

TRAVELING SYSTEM Tires Ag (R1) Front, Rear: - Turf (R3) Front: 18x8.50-10 4PR, Rear: 26x12.0-12 4PR Industrial (R4) Front: 18x8.50-10 6PR, Rear: 26x12.0-12 4PR Clutch - Steering Hydrostatic Power Transmission Hydrostatic Transmission Drive Selected 4WD Brake Wet Disk Minimum Turning Radius ft. (m) 7.87 (2.4)

HYDRAULIC UNIT Hydraulic Control System Select Control, Open Center Pump Capacity (main) US gal/min. (L/min) 4.3 (16.1) Pump Capacity (steering) US gal/min. (L/min) 3.7 (14.1) 3-Point Hitch Limited Category 1 Maximum Lift Force Lift Point lb. (kg) 24 in. Behind Lift Point lb. (kg)

660 (300)

System Pressure psi (MPa) 1,891 (13.00)

POWER TAKE OFF (PTO) Power Take Off (PTO) Power HP (kW) 15.6 (11.6) Type Hydraulic Clutch Rear Shaft Size 35 mm OD, 6 Splines Type Independent Speed/Engine RPM 554/3,200 Mid Shaft Size SAE16/32, 15 Splines Type Independent Speed/Engine RPM 2,057/3,200

TRAVELING SPEEDS Forward mph (km/h) 0-8.6 (0-13.8) Reverse mph (km/h) 0-6.3 (0-10.0)

To learn more or to find a dealer nearest you, please visit YanmarTractor.com.

YANMAR YL110 CURVED BOOM LOADER SPECIFICATIONS Maximum Lift Height to Pivot Pin in. (mm) 71 (1,800) Maximum Lift Height Under Level Bucket in (mm) 51 (1,295) Reach at Maximum Lift Height in. (mm) 24 (610) Reach with Bucket on Ground in (mm) 47 (1,205) Digging Depth in. (mm) 3.9 (100) Maximum Drop Angle degree 40 Maximum Rollback Angle degree 30 Lift Capacity (Pivot Pin) lb. (kg) 825 (375) Breakout Force (Pivot Pin) lb. (kg) 1,342 (610) Rollback Force (Ground Line) lb. (kg) 1,122 (510) Rated Flow GPM (L/m) 4.3 (16.1) System Pressure psi (MPa) 1,891 (13.0) Rising Time to Full Height w/o Load sec. 3.0 Lowering Time w/o Load sec 1.8 Attachment Rollback Time sec. 2.2 Attachment Dumping Time (REGEN) sec. 1.5 Bucket Width in. (mm) 48 (1,219) Bucket Capacity cu ft. (m3) 5.3 (0.15) Bucket Weight lb. (kg) 156.5 (71)

AVAILABLE ATTACHMENTS FOR THE YANMAR 221 Front End Loader Front Blade 3 Pt Attachments Backhoe Snow Blower Mid-Mount Mower Front Broom

Note: Attachments sold separately. Please see your dealer for details.

ASSEMBLED IN THE USAAll Yanmar tractors are assembled in our state-of-the-art facility in Adairsville, GA, just north of Atlanta. Replacement parts are quickly fulfilled from this location to anywhere in North America. Plus, a five-year limited powertrain warranty is standard on all new tractor purchases.

DEALERS WHO SHARE OUR COMMITMENTYanmar tractors are sold and serviced by a network of dealers who are committed to serving the communities in which they live and work. They share our passion for the land as well as a passion for unsurpassed service. To find the dealer nearest you, please visit YanmarTractor.com.

©20

14 Y

anm

ar A

mer

ica

Corp

orat

ion.

YT-

221S

S-3/

14

YANMAR B65 BACKHOE SPECIFICATIONS Maximum Digging Depth in. (mm) 76.5 (1,943.1) SwingArc 150 degrees Loading Height (bucket at 60 deg) in. (mm) 60 (1,524) Reach from Center Line of Swing Pivot in. (mm) 104 (2,641.6) Bucket Rotation 180 degrees Loading Reach (bucket at 60 deg) in. (mm) 33 (838.2) Transport Overhang in. (mm) 37 (939.8) Undercut in. (mm) 17 (431.8) Stabilizer Spread, down position in. (mm) 74 (1,879.6) Stabilizer Spread, up position in. (mm) 58 (1,473.2) Bucket Cylinder Digging Force lbs. (kg) 1,918 (870) Dipperstick Cylinder Digging Force lbs. (kg) 1,118 (507) Hydraulic Volume Requirements gpm (lpm) 2-4 (7.57-15.14) Hydraulic Pressure Requirements psi (kg/cm) 2,000 (140.65) Recommended Tractor HP Requirements 15-25

YANMAR M60 MID-MOUNT MOWER SPECIFICATIONS Mounting Method Ground Following Cutting Width in. (mm) 60 (1,524) Cutting Height in. (mm) 1-4 (25.4-101.6) Number of Blades 3

TRACTORS / 324

Yanmar’s new 324 is the ideal sub-compact tractor choice when you need more power and more implement options. Powered by our renowned 3-cylinder, liquid-cooled diesel engine, it delivers a unique combination of power and fuel efficiency. Its performance is complemented by an all-new operator’s platform that was designed with you in mind. The 324 is easier to climb on and off, features a more comfortable seat position and puts every instrument and control at your fingertips. You believe in doing a job the right way. That’s why this tractor is built to work as long and as hard as you need it to.


Conquer your to-do list.


FEATURES



PERFORMANCE LINK TECHNOLOGYTM

SMOOTH, HYDRAULIC POWER STEERING


FRONT-END LOADER CAPACITY + QUICK HITCH

TRUE POSITION CONTROL ON 3 POINT HITCH

IMPROVED PRODUCTIVITY.The new 324 is equipped with twin side-by-side hydrostatic transmission pedals that allow you to switch seamlessly between forward and reverse. You’ll notice that jobs, particularly those in tight spaces, get taken care of in a snap. This unique pedal design improves overall ease of operation. And you’ll notice that you’re getting more done with less effort. Which is nice.

A SMOOTHER RIDE. This tractor is also equipped with a full frame chassis. This means that while you’re tackling your property to-do list, you’ll be doing it on a tractor that operates with less vibration and more quietly. Plus it’s a design that’s rugged enough to last a lifetime. So climb on board and see what being a smooth operator feels like. We think you’ll enjoy the ride.

UNRIVALED VERSATILITY. With increased power comes increased versatility. You’ll be able to utilize a wide range of implements that will allow you to get the most out of what your property has to offer. Lift more. Dig deeper. Cut faster. No matter what the task at hand, this tractor will allow you to select an implement that will get the job done quickly, and with ease. We know you’re ready to get started. So are we.

Yanmar 324 Tractor SpecificationsENGINE Maker

Model Type

Yanmar3TNV80F4 Cycle Inline, Water Cooled Diesel

Number of Cylinders 3Bore and Stroke in. (mm) 3.15 x 3.30 (80 x 84)Total Displacement cu. In. (L) 77.2 (1.266)Gross Power: EPA Regulation HP (kW) 23.9 (17.8)Net Power HP (kW) 21.7 (16.2)Rated Revolution RPM 3,200Maximum Torque ft.lbs. (Nm) 45.7 (62.0)Battery 540 CCA

Fuel Diesel

CAPACITIES Fuel Tank US gal (L) 6.1 (23)Engine Oil US qt. (L) 3.6 (3.4)Engine Coolant US qt. (L) 3.0 (2.8)Transmission Oil US gal (L) 4.1 (15.5)Front Axle Oil US qt (L) 3.7 (3.5)

DIMENSIONS in. (mm) Overall Length (with 3-Point Hitch) 105.8 (2,688)Overall Width (with R4 Tires) 54.6 (1,387)Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 85.8 (2,180) Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 70.4 (1,789) Overall Height (with R4 Tires, Top Of Steering Wheel) 55.3 (1,405) Wheel Base 63.0 (1,600)Minimum Ground Clearance (with R4 Tires) 8.5 (215)Tread (with R4) Front: 37.8 (960), Rear: 40.5 (1,028)


TRAVELING SYSTEM Tires Ag (R1) Front, Rear: -

Turf (R3) Front: 23x8.50-12 4PR, Rear: 33x12.5-16.5 4PRIndustrial (R4) Front: 23x8.50-12 4PR, 12-16.5 10PR

Clutch -Steering Hydrostatic PowerTransmission Hydrostatic Transmission, Dual Range SpeedsDrive Selected 4WDBrake Wet DiskMinimum Turning Radius ft. (m) 8.5 (2.6)

HYDRAULIC UNIT Hydraulic Control System Position Control, Open CenterPump Capacity (main) US gal/min. (L/min) 4.3 (16.1)Pump Capacity (steering) US gal/min. (L/min) 3.7 (14.1)3-Point Hitch Limited Category 1Maximum Lift Force Lift Point lb. (kg) -

24 in. Behind Lift Point lb. (kg) 1,209 (548)System Pressure psi (MPa) 2,429 (16.7)

POWER TAKE OFF (PTO) Power Take Off (PTO) Power HP (kW) 18.1 (13.5)Type Hydraulic ClutchRear Shaft Size 35 mm OD, 6 Splines

Type IndependentSpeed/Engine RPM 554/3,200

Mid Shaft Size SAE16/32, 15 SplinesType IndependentSpeed/Engine RPM 2,057/3,200

TRAVELING SPEEDS Forward mph (km/h) Low: 0-5.9 (0-9.4), High: 0-12.3 (0-19.6)Reverse mph (km/h) Low: 0-4.1 (0-6.6), High: 0-8.5 (0-13.7)


YANMAR YL210 CURVED BOOM LOADER SPECIFICATIONSMaximum Lift Height to Pivot Pin in. (mm) 79 (2,000)Maximum Lift Height Under Level Bucket in (mm) 58 (1,465)Reach at Maximum Lift Height in. (mm) 36 (920)Reach with Bucket on Ground in (mm) 53 (1,355)Digging Depth in. (mm) 3.9 (100)Maximum Drop Angle degree 45Maximum Rollback Angle degree 30Lift Capacity (Pivot Pin) lb. (kg) 1,199 (545)Breakout Force (Pivot Pin) lb. (kg) 2,090 (950)Rollback Force (Ground Line) lb. (kg) 1,518 (690)Rated Flow GPM (L/m) 4.3 (16.1)System Pressure psi (MPa) 2,429 (16.7)Rising Time to Full Height w/o Load sec. 3.7Lowering Time w/o Load sec 2.3Attachment Rollback Time sec. 2.3Attachment Dumping Time (REGEN) sec. 1.6Bucket Width in. (mm) 53 (1,346)Bucket Capacity cu ft. (m3) 5.65 (0.16)Bucket Weight lb. (kg) 136 (62)

AVAILABLE ATTACHMENTS FOR THE YANMAR 324Front End Loader Front Blade 3 Pt AttachmentsBackhoe Snow BlowerMid-Mount Mower Front Broom




YANMAR B65 BACKHOE SPECIFICATIONSMaximum Digging Depth in. (mm) 76.5 (1,943.1)SwingArc 150 degreesLoading Height (bucket at 60 deg) in. (mm) 60 (1,524) Reach from Center Line of Swing Pivot in. (mm) 104 (2,641.6)Bucket Rotation 180 degreesLoading Reach (bucket at 60 deg) in. (mm) 33 (838.2)Transport Overhang in. (mm) 37 (939.8)Undercut in. (mm) 17 (431.8)Stabilizer Spread, down position in. (mm) 74 (1,879.6)Stabilizer Spread, up position in. (mm) 58 (1,473.2) Bucket Cylinder Digging Force lbs. (kg) 2,036 (923.5)Dipperstick Cylinder Digging Force lbs. (kg) 1,187 (538.4)Hydraulic Volume Requirements gpm (lpm) 2-4 (7.57-15.14)Hydraulic Pressure Requirements psi (kg/cm) 2,000 (140.65) Recommended Tractor HP Requirements 15-25

YANMAR M60 MID-MOUNT MOWER SPECIFICATIONSMounting Method Ground FollowingCutting Width in. (mm) 60 (1,524)Cutting Height in. (mm) 1-4 (25.4-101.6)Number of Blades 3

©20

14 Y

anm

ar A

mer

ica

Corp

orat

ion.

YT-

324S

S-3/

14

TRACTORS / 424

Designed for properties that have challenging terrain, the new Yanmar 424 has a higher ground clearance and is incredibly stable under tough conditions. Powered by Yanmar’s renowned 3-cylinder, liquid-cooled diesel engine you get a unique combination of power and fuel efficiency. Its performance is complemented by an all-new operator’s platform that was designed with you in mind. The 424 is easier to climb on and off, features a more comfortable seat position and puts every instrument and control at your fingertips. It’s a tough tractor designed to do a tough job.


Tough terrain needs a tougher tractor.


FEATURES



TWO SIDE-BY-SIDE HYDROSTATIC TRANSMISSION PEDALS

FULL-FRAME CHASSIS


FRONT-END LOADER CAPACITY + QUICK HITCH

SMOOTH, HYDRAULIC POWER STEERING

SIMPLY PUT, LIFT MORE.The pure power of the 424 means the front loader can lift a category leading 1,200 lbs. That’s power usually associated with much larger tractors. But that’s Yanmar’s strength. Powered by fuel-efficient diesel engines that let you do more. And the last time we checked, more is good.

PRECISE REAR IMPLEMENT CONTROL. Making sure your rear implements operate in a position that’s always repeatable means your tasks get done quickly and more accurately. And that’s what Yanmar’s unique True Position Control delivers. An easy-to-reach control lever controls the rear implements operating height and makes sure it’s always right where you need it. Makes for easy operation. And it takes better care of your land. Everyone likes that.

COVER THE TOUGHER TERRITORY. The new 424 is outfitted with a larger, more aggressive tire package. This makes for a tractor with increased ground clearance and greater operational stability over challenging terrain. It means you can get on board and operate in the toughest of territory with complete comfort and confidence. And with this increased operating confidence, you’ll be able to get even more out of what your land has to offer. Not bad, huh?

Yanmar 424 Tractor SpecificationsENGINE Maker Yanmar Model 3TNV80F Type 4 Cycle Inline, Water Cooled Diesel Number of Cylinders 3 Bore and Stroke in. (mm) 3.15x3.30 (80x84) Total Displacement cu. In. (L) 77.2 (1.266) Gross Power: EPA Regulation HP (kW) 23.9 (17.8) Net Power HP (kW) 21.7 (16.2) Rated Revolution RPM 3,200 Maximum Torque ft.lbs. (Nm) 45.7 (62.0) Battery 540 CCA Fuel Diesel

CAPACITIES Fuel Tank US gal (L) 6.1 (23.0) Engine Oil US qt. (L) 3.6 (3.4) Engine Coolant US qt. (L) 3.0 (2.8) Transmission Oil US gal (L) 4.1 (15.5) Front Axle Oil US gal (L) 3.7 (3.5)

DIMENSIONS in. (mm) Overall Length (with 3-Point Hitch) 105.8 (2,688) Overall Width (with R4 Tires) 54.1 (1,373) Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 87.2 (2,215) Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 71.8 (1,824) Overall Height (with R4 Tires, Top Of Steering Wheel) 56.7 (1,440) Wheel Base 63.0 (1,600) Minimum Ground Clearance (with R4 Tires) 9.9 (249) Tread (with R4) Front: 37.8 (960), Rear: 40.5 (1,029)


TRAVELING SYSTEM Tires Ag (R1) Front, Rear: - Turf (R3) Front: 24x8.50-14 4PR, Rear: 36x14.00-15 4PR Industrial (R4) Front: 23x8.50-12 4PR, Rear: 14-17.5 6PR Clutch - Steering Hydrostatic Power Transmission Hydrostatic Transmission, Dual Range Speeds Drive Selected 4WD Brake Wet Disk Minimum Turning Radius ft. (m) 8.5 (2.6)

HYDRAULIC UNIT Hydraulic Control System Position Control, Open Center Pump Capacity (main) US gal/min. (L/min) 4.3 (16.1) Pump Capacity (steering) US gal/min. (L/min) 3.7 (14.1) 3-Point Hitch Limited Category 1 Maximum Lift Force Lift Point lb. (kg) - 24 in. Behind Lift Point lb. (kg) 1,209 (548) System Pressure psi (MPa) 2,429 (16.7)

POWER TAKE OFF (PTO) Power Take Off (PTO) Power HP (kW) 18.1 (13.5) Type Hydraulic Clutch Rear Shaft Size 35 mm OD, 6 Splines Type Independent Speed/Engine RPM 554/3,200 Mid Shaft Size SAE16/32, 15 Splines Type Independent Speed/Engine RPM 2,057/3,200

TRAVELING SPEEDS Forward mph (km/h) Low: 0-6.3 (0-10.0), High: 0-13.1 (0-21.0) Reverse mph (km/h) Low: 0-4.3 (0-7.0), High: 0-9.1 (0-14.7)


YANMAR YL210 CURVED BOOM LOADER SPECIFICATIONS Maximum Lift Height to Pivot Pin in. (mm) 79 (2,000) Maximum Lift Height Under Level Bucket in (mm) 58 (1,465) Reach at Maximum Lift Height in. (mm) 36 (920) Reach with Bucket on Ground in (mm) 53 (1,355) Digging Depth in. (mm) 3.9 (100) Maximum Drop Angle degree 45 Maximum Rollback Angle degree 30 Lift Capacity (Pivot Pin) lb. (kg) 1,199 (545) Breakout Force (Pivot Pin) lb. (kg) 2,090 (950) Rollback Force (Ground Line) lb. (kg) 1,518 (690) Rated Flow GPM (L/m) 4.3 (16.1) System Pressure psi (MPa) 2,429 (16.7) Rising Time to Full Height w/o Load sec. 3.7 Lowering Time w/o Load sec 2.3 Attachment Rollback Time sec. 2.3 Attachment Dumping Time (REGEN) sec. 1.6 Bucket Width in. (mm) 53 (1,346) Bucket Capacity cu ft. (m3) 5.65 (0.16) Bucket Weight lb. (kg) 136 (62)

AVAILABLE ATTACHMENTS FOR THE YANMAR 424 Front End Loader Front Blade 3 Pt Attachments Backhoe Snow Blower Mid-Mount Mower Front Broom




YANMAR B65 BACKHOE SPECIFICATIONS Maximum Digging Depth in. (mm) 76.5 (1,943.1) SwingArc 150 degrees Loading Height (bucket at 60 deg) in. (mm) 60 (1,524) Reach from Center Line of Swing Pivot in. (mm) 104 (2,641.6) Bucket Rotation 180 degrees Loading Reach (bucket at 60 deg) in. (mm) 33 (838.2) Transport Overhang in. (mm) 37 (939.8) Undercut in. (mm) 17 (431.8) Stabilizer Spread, down position in. (mm) 74 (1,879.6) Stabilizer Spread, up position in. (mm) 58 (1,473.2) Bucket Cylinder Digging Force lbs. (kg) 2,036 (923.5) Dipperstick Cylinder Digging Force lbs. (kg) 1,187 (538.4) Hydraulic Volume Requirements gpm (lpm) 2-4 (7.57-15.14) Hydraulic Pressure Requirements psi (kg/cm) 2,000 (140.65) Recommended Tractor HP Requirements 15-25

YANMAR M60 MID-MOUNT MOWER SPECIFICATIONS Mounting Method Ground Following Cutting Width in. (mm) 60 (1,524) Cutting Height in. (mm) 1-4 (25.4-101.6) Number of Blades 3

©20

14 Y

anm

ar A

mer

ica

Corp

orat

ion.

YT-

424S

S-3/

14

Documents

When you climb on board, you’re taking a step up.agromaskiner.se/wp-content/uploads/2015/10/Yanmar.pdf · TRACTORS / 324 Yanmar’s new 324 is the ideal sub-compact tractor choice