Wharfedale Pro General Brochure 2013

Wharfedale ProGeneral Brochure

2013

www.wharfedalepro.com Loudspeakers Electronics Microphones

Thank you for your interest in the 2013 product range from Wharfedale Pro.

Britain has long been recognised throughout the world as being the home of loudspeaker technology in terms of innovation and quality. This reputation was established over many years by some of the worlds most famous loudspeaker manufacturers. Wharfedale, founded over 80 years ago, has always been at the forefront of developing this reputation.

Wharfedale Pro is a specialised division that designs and manufactures pro and commercial audio equipment, from portable and touring to fi xed installation sound systems. Wharfedale Pro offer a comprehensive product range that ensures every stage of the signal path is catered for, enabling turnkey solutions based on Wharfedale Pro equipment, from microphone to loudspeaker.

Wharfedale Pro is committed to equip artists and contractors alike with the tools they need to fl ourish in their respective fi eld, providing class leading performance at down to earth prices.

Wharfedale Pro employs specialised teams to undertake every stage of a products lifecycle, from design and manufacture to marketing, sales, logistics and distribution on a global scale. All products are produced in our privately owned cutting edge vertically integrated factory ensuring that quality control from component level through to end product is second to none, resulting in a fi nished product just as the designers intended.

SHO 1DELTA 3TitanTM 5EVP-X 7EVP-R 9VECTOR 11KINETIC 13KINETIC ACTIVE 15WPM-1 17DIAMOND 18EZGO 19

LOUDSPEAKERSLOUDSPEAKERS

1

Ultra High Power Loudspeakers for Sound Reinforcement and ReproductionSHO represents the pinnacle of modern loudspeaker design. SHO incorporates advanced features such as oversized cones and surrounds, ultra sophisticated heatsinks and 5” voice coils. By incorporating these ground-breaking technologies SHO loudspeakers can deliver punishing level all night long without the faintest hint of fatigue. Our revolutionary constant directivity waveguide design provides tight pattern control, with a horn that can be rotated by 90°.

A range of cabinet types with different driver and waveguide confi gurations are available to ensure that you can specify the correct speaker for the job. SHO is an ideal, cost effective solution for demanding installations or touring applications that require extreme sound pressure levels for extended periods.

Key Features• 5" Voice Coils• 17% more radiating area and bass power • Tight pattern control• Advanced heat dispersion technology• Rotatable constant directivity horns• Pure Titanium HF driver diaphragm• Neodymium Iron Boron LF driver magnet

12" LF, 90 x 40 HF dispersion, 8 ohms Impedance, 55Hz-20kHz, 95dB(1w@1m),Power Rating: 1000W Continuous, 2000W Music, 4000W Peak,Product Dimension (H x W x D):(MM): 555 x 375 x 425(inches): 21.85" x 14.76" x 16.73"Carton Dimension (H x W x D):(MM): 658 x 447 x 494(inches): 25.90" x 17.60" x 19.45"Net Weight: 31.00kg/68.20lbsGross Weight: 36.00kg/79.20lbs

SH1294

12" LF, 90 x 40 HF dispersion, 8 othms Impedance, 55Hz-20kHz, 95dB(1w@1m),Power Rating: 1000W Continous, 2000W Music, 4000W Peak, Product Dimension (H x W x D):(MM): 570 x 375 x 332(inches): 22.44" x 14.76" x 13.07"Carton Dimension (H x W x D):(MM): 652 x 440 x 378(inches): 25.67" x 17.32" x 14.90"Net Weight: 25.00kg/55.00lbsGross Weight: 30.00kg/66.00lbs

SH1294M

LoudspeakersSHO

Full Range

2

2 x 12" LF, 60 x 40 HF dispersion, 4 ohms Impedance, 40Hz-20kHz, 99dB(1w@1m),Power Rating: 2000W Continuous, 4000W Music, 8000W Peak,Product Dimension (H x W x D):(MM): 962 x 375 x 425(inches): 37.87" x 14.76" x 16.73"Carton Dimension (H x W x D):(MM): 1045 x 435 x 482.5(inches): 41.20" x 17.10" x 19.00"Net Weight: 50.00kg/110.00lbsGross Weight: 56.00kg/123.20lbs

SH2264

2 x 15" LF, 90 x 60 HF dispersion, 4 ohms Impedance, 35Hz-20kHz, 98dB(1w@1m),Power Rating: 2000W Continuous, 4000W Music, 8000W Peak, Product Dimension (H x W x D):(MM): 1166 x 438 x 440(inches): 45.90" x 17.24" x 17.32"Carton Dimension (H x W x D):(MM): 1250 x 498 x 495(inches): 49.20" x 19.60" x 19.50"Net Weight: 56.00kg/123.20lbsGross Weight: 64.00kg/140.80lbs

SH2596

15" LF, 60 x 40 HF dispersion, 8 ohms Impedance, 45Hz-20kHz, 96dB(1w@1m), Power Rating: 1000W Continous, 2000W Music, 4000W Peak,Product Dimension (H x W x D):(MM): 750 x 438 x 440(inches): 29.52" x 17.24" x 17.32"Carton Dimension (H x W x D):(MM): 832 x 498 x 495(inches): 32.80" x 19.60" x 19.50"Net Weight: 39.00kg/85.80lbsGross Weight: 45.50kg/100.1lbs

SH1564

15" LF, 90 x 60 HF dispersion, 8 ohms Impedance, 45Hz-20kHz,96dB(1w@1m), Power Rating: 1000W Continuous, 2000W Music, 4000W Peak, Product Dimension (H x W x D):(MM): 750 x 438 x 440(inches): 29.52" x 17.24" x 17.32"Carton Dimension (H x W x D):(MM): 832 x 498 x 495(inches): 32.80" x 19.60" x 19.50"Net Weight: 39.00kg/85.80lbsGross Weight: 45.50kg/100.1lbs

SH1596

2 x 12" LF, 90 x 60 HF dispersion, 4 ohms Impedance, 45Hz-20kHz, 99dB(1w@1m),Power Rating: 2000W Continuous, 4000W Music, 8000W Peak, Product Dimension (H x W x D):(MM): 962 x 375 x 425(inches): 37.87" x 14.76" x 16.73"Carton Dimension (H x W x D):(MM): 1045 x 435 x 482.5(inches): 41.20" x 17.10" x 19.00"Net Weight: 50.00kg/110.00IbsGross Weight: 56.00kg/123.20lbs

SH2296

2 x 15" LF, 60 x 40 HF dispersion, 4 ohms Impedance, 35Hz-20kHz, 98dB(1w@1m),Power Rating: 2000W Continuous, 4000W Music, 8000W Peak, Product Dimension (H x W x D):(MM): 1166 x 438 x 440(inches): 45.90" x 17.24" x 17.32"Carton Dimension (H x W x D):(MM): 1250 x 498 x 495(inches): 49.20" x 19.60" x 19.50"Net Weight: 56.00kg/123.20lbsGross Weight: 64.00kg/140.80lbs

SH2564

15" LF, 8 ohms Impedance, 45Hz-200Hz, 96dB(1w@1m),Power Rating: 1000W Continuous, 2000W Music, 4000W Peak, Product Dimension (H x W x D):(MM): 456 x 640.5 x 660.5 (inches): 17.95" x 25.21" x 26.00" Carton Dimension (H x W x D):(MM): 531 x 700 x 720(inches): 20.90" x 27.60" x 28.30"Net Weight: 44.00kg/96.80lbs Gross Weight: 48.00kg/105.60lbs

SH150018" LF, 8 ohms Impedance, 42Hz-300Hz, 98dB(1w@1m),Power Rating: 1000W Continuous, 2000W Music, 4000W Peak, Product Dimension (H x W x D):(MM): 532 x 641 x 822(inches): 20.94" x 25.23" x 32.38" Carton Dimension (H x W x D):(MM): 607 x 700 x 882(inches): 23.90" x 27.60" x 34.70"Net Weight: 50.50kg/ 111.10lbs Gross Weight: 62.50kg/137.50lbs

SH18002 x 18" LF, 4 ohms Impedance, 35Hz-300Hz, 102dB(1w@1m),Power Rating: 2000W Continuous, 4000W Music, 8000W PeakProduct Dimension (H x W x D):(MM): 601 x 1030 x 870(inches): 23.66" x 40.55" x 34.25" Carton Dimension (H x W x D):(MM): 676 x 1090 x 930(inches): 26.60" x 42.90" x 36.60"Net Weight: 94.00kg/206.80lbs Gross Weight: 113.00kg/248.60lbs

SH2800

SHO

Subwoofers

Loudspeakers

3

Delta has been designed from the ground up to provide outstanding performance and reliability. Delta utilises robust technology and durable components to ensure that it can meet the demands of touring, rental and fi xed installation applications.

High output, low distortion cast frame woofers with 3” voice coils are used throughout the range for unparalled low frequency reproduction. 2” titanium compression drivers are coupled to 90° x 45° elliptical waveguides for impressive output level and smooth HF dispersion.

Comprehensive rigging points are provided for use in fl own applications, so Delta is equally at home in a wide variety of fi xed installation and touring applications. Rhino Rock™, our new texturised composite fi nish is used in all models. This new fi nish provides the great look of a painted fi nish with the durability of a carpet covered enclosure giving you the best of both worlds. The Delta Series is constructed from plywood and features dual angle pole mounts to ensure that your sound is aimed directly at the audience, not at the ceiling.

• High power, low distortion cast frame woofers• 1.4” exit 2” titanium diaphragm compression drivers• 90° x 45° elliptical waveguides• Dual angle pole mount receptacles• Rhino Rock™ textured composite fi nish

LoudspeakersDelta

2-way, 10" High Power, Low Distortion Cast Frame Woofer, 65-20kHz Frequency Response(+/-3dB),8 ohms Impedance,Bi-Amp,97dB(1w@1m), Power Rating: 300W Continuous, 600W Music, 1200W PeakProduct Dimension (H x W x D):(MM): 500 x 338/212.4 x 330(Inches): 19.7" x 13.3"/8.4" x 13"Carton Dimension (H x W x D):(MM): 575 x 400/300 x 386(Inches): 22.6" x 15.7"/11.8" x 15.2"Net Weight: 16.58Kg/36.5lbsGross Weight: 19.6Kg/43.0lbs

Delta 102-Way, 12" High Power Woofer, 60-20kHz Frequency Response (+/-3dB),8 ohms Impedance, Bi-Amp, 97dB (1w@1m),Power Rating: 400W Continuous, 800W Music, 1600 PeakProduct Dimension (H x W x D):(MM): 630 x 390/241 x 373(inches): 24.80" x 15.30"/9.50" x 14.70"Carton Dimension (H x W x D):(MM): 733 x 566 x 464(inches): 28.90" x 22.30" x 18.30"Net Weight: 24.70kg/54.34lbsGross Weight: 29.00kg/63.80lbs

Delta 12

Key Features

Full Range

• Plywood construction• Dual spider technology on 18” woofers• Rubberised 4-way handles• Rigging points on Delta 12 and 15

4

Delta

2-Way, 15" High Power Woofer, 50-20kHz Frequency Response (+/-3dB),8 ohms Impedance, Bi-Amp, 98dB (1w@1m),Power Rating: 500W Continuous, 1000W Music, 2000 PeakProduct Dimension (H x W x D):(MM): 700 x 446/281.4 x 406(inches): 27.60" x 17.60"/11.10" x 16.00"Carton Dimension (H x W x D):(MM): 803 x 622 x 498(inches): 31.60" x 24.50" x 19.60"Net Weight: 29.90kg/65.78lbsGross Weight: 35.50kg/78.10lbs

Delta 152-Way monitor, 12" High Power Woofer, 60-20kHz Frequency Response (+/-3dB),8 ohms Impedance, Bi-Amp, 97dB (1w@1m),Power Rating: 400W Continuous, 800W Music, 1600 PeakProduct Dimension (H x W x D):(MM): 449 x 390 x 618(inches): 17.70" x 15.30" x 24.30"Carton Dimension (H x W x D):(MM): 462 x 690 x 522(inches): 18.20" x 27.20" x 20.60"Net Weight: 23.18kg/50.99lbsGross Weight: 28.50kg/62.70lbs

Delta 12M

2-Way monitor, 15" High Power Woofer, 55-20kHz Frequency Response (+/-3dB),8 ohms Impedance, Bi-Amp, 98dB (1w@1m),Power Rating: 500W Continuous, 1000W Music, 2000 PeakProduct Dimension (H x W x D):(MM): 493 x 446 x 685(inches): 19.40" x 17.60" x 27.00"Carton Dimension (H x W x D):(MM): 518 x 757 x 565(inches): 20.40" x 29.80" x 22.20"Net Weight: 27.24kg/59.92lbsGross Weight: 33.96kg/74.71lbs

Quasi 3-Way, 2 x 15" High Power Woofer, 45-20kHz Frequency Response (+/-3dB),4 ohms Impedance, Bi-Amp, 101dB (1w@1m),Power Rating: 1000W Continuous, 2000W Music, 4000 PeakProduct Dimension (H x W x D):(MM): 1135 x 488/299.6 x 450(inches): 44.70" x 19.20"/11.80" x 17.70"Carton Dimension (H x W x D):(MM): 1218 x 558 x 522(inches): 48.00" x 22.00" x 20.60"Net Weight: 52.90kg/116.38lbsGross Weight: 59.00kg/129.80lbs

15" subwoofer, 8 ohms Impedance, 98dB (1w@1m),Bi-Amp: 42-2kHz, Passive: 42-150HzPower Rating: 700W Continuous, 1400W Music, 2800 PeakProduct Dimension (H x W x D):(MM): 471 x 471 x 600(inches): 18.50" x 18.50" x 23.60"Carton Dimension (H x W x D):(MM): 556 x 672 x 543(inches): 21.90" x 26.50" x 21.40"Net Weight: 31.50kg/69.30lbsGross Weight: 35.12kg/77.26lbs

Delta 15B18" subwoofer, 8 ohms Impedance, 99dB (1w@1m),Bi-Amp: 38-1.5kHz, Passive: 38-150HzPower Rating: 800W Continuous, 1600W Music, 3200 PeakProduct Dimension (H x W x D):(MM): 539 x 539 x 650(inches): 21.20" x 21.20" x 25.60"Carton Dimension (H x W x D):(MM): 624 x 722 x 611(inches): 24.60"x 28.40" x 24.10"Net Weight: 37.30kg/82.06lbsGross Weight: 43.20kg/95.04lbs

Delta 18B2 x 18" Dual Chamber subwoofer, 100dB (1w@1m),30-1.5kHz Frequency Response (+/-3dB),Parallel: 4 ohms, Discrete: 2 x 8ohms system Impedance,Power Rating: 1600W Continuous, 3200W Music, 6400 PeakProduct Dimension (H x W x D):(MM): 541 x 1041 x 650(inches): 21.30" x 41.00" x 25.60"Carton Dimension (H x W x D):(MM): 626 x 1126 x 722(inches): 24.60" x 44.30" x 28.40"Net Weight: 78.90kg/173.58lbsGross Weight: 86.00kg/189.20lbs

Delta 218B

Delta 15M Delta 215

Subwoofers

Loudspeakers

5

Ultra-Lightweight, Class Leading PerformanceThe Titan™ Series are ultra-lightweight, portable loudspeakers suitable for the widest range of applications. Initially designed for the portable live sound market the Titan has also been a runaway success in the fi xed installation sector. All models in the range are suitable for both sound reinforcement and reproduction of foreground / background music and speech.

The very best custom designed and built components are used throughout the Titan™ range. From the gas assist injection moulded enclosures to the moisture proof woofers, every element is designed specifi cally for the loudspeaker it features in. The gas assist injection moulding and internal laminar fl ow ribs make the enclosure lighter and much more rigid than any competitor, aiding transportation and the reproduction of low frequencies.

The Titan™ enclosure boasts a number of mounting options, including a lockable pole mount socket. A range of optional mounting accessories are available.

• 2-way refl ex systems• 3 Passive and 3 Active models + 2 Powered Subs• Low distortion, high power woofers• XLR output for connecting to another powered speaker (Active only)

• RCA inputs for MP3, CD or other line level devices (Active only)

• 90° x 60° degree integral Elliptical Wave Guide • Power On LED indicator in horn throat and back panel (Active only)

2-way passive speaker system, 8 inch woofer, 8 ohms, 70Hz-20kHz (+/-3dB), 96dB (1w@1m), 90 x 60 EWGPower Rating: 150W Continuous, 300W Music, 600W PeakProduct Dimension (H x W x D):(MM): 396 x 266 x 221(inches): 15.59" x 10.47" x 8.70"Carton Dimension (H x W x D)(MM): 485 x 339 x 294(inches): 19.10" x 13.35" x 11.57"Net Weight: 5.50kg/12.10lbsGross Weight: 7.50Kg/16.50lbs

Titan 8 PassiveActive 8'' 2-way Bi-Amplifi ed, AC 100~240V, 50/60Hz, Low frequency power (Class D):150W RMS, 300W Peak,High frequency power (Class D): 30W RMS, 60W Peak, 90 x 60 EWGProduct Dimension (H x W x D)(MM): 396 x 266 x 221(inches): 15.60" x 10.50" x 8.70"Carton Dimension (H x W x D)(MM): 485 x 339 x 294(inches): 19.09" x 13.35" x 11.57"Net Weight: 6.25kg/13.75lbsGross Weight: 8.15kg/17.93lbs

Titan 8 Active MKII

LoudspeakersTitanTM

• Active signal limiting system with LED indicator (Active only)• DTFTM Dynamic Thermal Filament HF driver protection• Lightweight, high strength Polypropylene cabinet• Integral 35mm (1-3/8") stand socket• M6, M8 & M10 hanging points• Accommodates OmniMount® 30.0 bracket (TitanTM 8) & 60.0 bracket (TitanTM 12 & 15)

• Built in, rubberized easy-grip handles for convenient transportation

Full Range

Key Features

6

All TitanTM Subwoofers Are Available With Grey Or Black Finishes

12" LF, 2-way, 8W, 55-20kHz (+/-3dB), 98dB (1w@1m), 90 x 60 EWGPower Rating: 250W Continuous, 500W Music, 1000W PeakProduct Dimension (H x W x D):(MM): 556 x 384 x 312(inches): 21.88" x 15.10" x 12.30"Carton Dimension (H x W x D):(MM): 663 x 435 x 408(inches): 26.10" x 17.13" x 16.06"Net Weight: 12.00kg/26.40lbsGross Weight: 13.72kg/30.18Ibs

Titan 12 Passive

12" 2-way Bi-Amplifi ed, 55-20kHz AC 100~120V/220~240V, 50/60Hz,Frequency Response (+/-3dB)Balanced: 10kW; Unbalanced: 5kWLow Frequency Power Amplifi er: 250W RMS (class D):High Frequency Power Amplifi er: 50W RMS (class D):Product Dimension (H x W x D):(MM): 556 x 384 x 312(inches): 21.90" x 15.10" x 12.30"Carton Dimension (H x W x D):(MM): 663 x 435 x 408(inches): 26.10" x 17.13" x 16.06"Net Weight: 12.40kg/27.28lbsGross Weight: 15.50kg/34.10lbs

Titan 12D

2-way speaker system, 15" woofer, 8 ohms, 50-18kHz (+/-3dB), 97dB (1w@1m), 90 x 60 EWGPower Rating: 400W Continuous, 800W Music, 1600W PeakProduct Dimension (H x W x D):(MM): 708.3 x 477.8 x 401.8(inches): 27.90" x 18.80" x 15.80"Carton Dimension (H x W x D):(MM): 736 x 514 x 489(inches): 28.90" x 20.20" x 19.25"Net Weight: 22.00kg/48.40lbsGross Weight: 25.00kg/55.00Ibs

Titan 15 Passive

15" 2-way Bi-Amplifi ed, 50-20kHz AC 100~120V/220~240V, 50/60Hz,Frequency Response (+/-3dB)Balanced: 10k ohms Unbalanced: 5kWLow Frequency Power Amplifi er: 350W RMS (class D),High Frequency Power Amplifi er: 70W RMS (class A/B)Product Dimension (H x W x D):(MM): 708.3 x 477.8 x 401.8(inches): 27.90" x 18.80" x 15.80"Carton Dimension (H x W x D):(MM): 736 x 514 x 489(inches): 28.98" x 20.24" x 19.25"Net Weight: 22.90kg/50.38lbsGross Weight: 27.70kg/60.94lbs

Titan 15D

12" LF, Refl ex subwoofer, 4 ohms,55-200Hz (+/-3dB),Power Rating: 250W Continuous, 500W Peak,Product Dimension (H x W x D):(MM): 360 x 493 x 431(inches): 14.20" x 19.40" x 16.90"Carton Dimension (H x W x D):(MM): 445 x 503 x 565(inches): 17.52" x 19.80" x 22.24"Net Weight: 22.31kg/49.08lbsGross Weight: 26.26kg/57.77Ibs

Titan Sub A1215" LF, Band-pass subwoofer, 4 ohms, 45-150Hz +(+/-3dB),Power Rating: 400W Continuous, 600W Peak,Product Dimension (H x W x D):(MM): 630 x 478 x 640(inches): 24.80" x 18.80" x 25.20"Carton Dimension (H x W x D):(MM): 735 x 553 x 738(inches): 28.94" x 21.77" x 29.06"Net Weight: 45.48kg/100.05lbsGross Weight: 50.26kg/110.57Ibs

Titan Sub A15

Tita

nT

M

Active 12" 2-way Bi-Amplifi ed,AC 100V-120V~/220V-240V~,50/60Hz,Low Frequency Power (Class D): 150W RMS, 250W PeakHigh Frequency Power (Class D): 50W RMS, 100W PeakProduct Dimension (H x W x D):(MM): 556 x 384 x 312(Inches): 21.88" x 15.11" x 12.28"Carton Dimension (H x W x D):(MM): 663 x 435 x 408(Inches): 26.1" x 17.1" x 16.1"Net Weight: 10.8kg/23.76lbsGross Weight: 13.9kg/30.58bs

Titan 312AActive 15" 2-way Bi-Amplifi ed,AC 100V-120V~/220V-240V~,50/60Hz,Low Frequency Power (Class D): 150W RMS, 250W PeakHigh Frequency Power (Class D): 50W RMS, 100W PeakProduct Dimension (H x W x D):(MM): 708.3 x 477.8 x 401.8(Inches): 27.9" x 18.8" x 15.8"Carton Dimension (H x W x D):(MM): 830 x 514 x 489(Inches): 32.7" x 20.3" x 19.3"Net Weight: 17.86kg/39.3lbsGross Weight: 22.6kg/49.72lbs

Titan 315A

Subwoofers

Loudspeakers

The EVP-X Series provides you with durable, workhorse loudspeakers suitable for a wide range of sound reproduction and reinforcement applications.

The EVP-X Series is built around an advanced Elliptical Waveguide coupled to a 44mm titanium HF compression driver. The high frequency performance and transducer reliability is unprecedented in this product class. Our custom designed, propreitary drivers are characterised by their extended frequency response and excellent durability.

Our high-voltage crossover design uses high grade components

• 90°x60° Elliptical Waveguides (Full Range Models)• High Output, Low Distortion Transducers• Full Length Powder Coated Steel Grilles• High Frequency Driver Protection • High Voltage Crossovers• Trapezoidal Enclosures• Alloy Pole Mount Receptacles• High Frequency Boost Switch (+3dB)• High Pass Output (Subwoofers)• Signal And HF Protect LED Indicators (Full Range Models)

EVP-X provides excellent sound quality and reliability, it is ideal for almost any application.

LoudspeakersEVP-X

Key Features

8

12" LF , 2 Way FOH, 8 ohms, 55-20kHz (+/-3dB), 98dB (1w@1m), Power Rating: 250W Continuous, 500W Music, 1000W Peak Product Dimension (H x W x D):(MM): 590 x 430/297.5 x 370(inches): 23.20" x 16.90"/11.70" x 14.60"Weight: 19.30kg/42.46IbsCube(CBM/CTN): 0.140

EVP-X12

15" LF, 2 Way FOH, 8 ohms, 45-20kHz (+/-3dB), 98dB (1w@1m), Power Rating: 300W Continuous, 600W Music, 1200W Peak Product Dimension (H x W x D):(MM): 675 x 460/294.5 x 450(inches): 26.60" x 18.10"/11.50" x 17.70"Weight: 25.95kg/57.09IbsCube(CBM/CTN): 0.194

EVP-X15

12" LF Wedge Monitor, 8 ohms, 60-20kHz (+/-3dB), 98dB (1w@1m), Power Rating: 250W Continuous, 500W Music, 1000W Peak Product Dimension (H x W x D):(MM): 560 x 424 x 441(inches): 22.00" x 16.70" x 17.40"Weight: 18.50kg/40.70IbsCube(CBM/CTN): 0.172

EVP-X12M

15" LF Wedge Monitor, 8 ohms, 50-20kHz (+/-3dB), 98dB (1w@1m), Power Rating: 300W Continuous, 600W Music, 1200W Peak Product Dimension (H x W x D):(MM): 645 x 445 x 473.5(inches): 25.40'' x 17.50'' x 18.60''Weight: 23.40kg/52.0IbsCube(CBM/CTN): 0.214

EVP-X15M15" LF x 2 Quasi 3 Way, 4 ohms, 40-20kHz (+/-3dB), 100dB (1w@1m), Power Rating: 500W Continuous, 1000W Music, 2000W Peak Product Dimension (H x W x D):(MM): 1058 x 502/330 x 467(inches): 41.60" x 19.80"/13.00" x 18.40"Weight: 43.20kg/95.04IbsCube(CBM/CTN): 0.319

EVP-X215

18" Subwoofer, 4 ohms, 40-200kHz (+/-3dB), 100dB (1w@1m), Power Rating: 600W Continuous, 1200W Music, 2400W Peak Product Dimension (H x W x D):(MM): 610 x 522 x 610 (inches): 15.50" x 20.60" x 24.00"Weight: 47.40kg/104.28IbsCube(CBM/CTN): 0.311

EVP-X18B

EVP-X

15" subwoofer,4 ohms, 45-250kHz (+/-3dB), 99dB (1w@1m), Power Rating: 400W Continuous, 800W Music, 1600W Peak Product Dimension (H x W x D):(MM): 591 x 460 x 510 (inches): 23.20" x 18.10" x 20.00"Weight: 33.50kg/73.70IbsCube(CBM/CTN): 0.220

EVP-X15B

Subwoofers

Loudspeakers

Loudspeakers

The brand new EVP-R Series has been meticulously designed by the worlds most talented engineers, to offer the very best sound quality in a robust and portable package.

EVP-R uses new titanium diaphragm HF compression drivers and low distortion, high power woofers, for accurate, detailed and powerful sound reinforcement and reproduction.

High-impact plastic, 4-way carry handles from our flagship loudspeaker lines are now used, making EVP-R an excellent, easy to transport choice for the working live musician or rehearsing band. Dual-angle pole mount receptacles are used throughout the range to ensure that the HF dispersion is perfectly matched to the location of your audience, minimising early reflections from the ceiling. 90˚x60˚ Elliptical Wave Guides are used, for smooth, predictable coverage and continuity when mixing different models.

The new low-profile dual angle stage monitors can be positioned at either 40˚ or 55˚ angles to ensure compatibility with all stage situations, ensuring that as a gigging musician you will get the best sound on stage, night after night. The EVP-R stage monitors incorporate a Speakon™ connector on each side to facilitate neat parallel wiring along the widest of stages. We have included a dualangle pole mount receptacle on all stage monitors so they can double up as a neat utility box, either front-of-house or as a stand mounted drum fill.

• Low Distortion, High Power Woofers• Titanium Diaphragm HF Compression Drivers• Dual Angle Stage Monitors• 90˚x60˚ Elliptical Wave Guides• High-Impact Plastic 4-Way Handles• Dual Angle Pole Mount Receptacles

• Powder Coated Steel Formed Grilles• Parallel Wired Speakon™/¼” Jack Combi Inputs• Parallel Wired Speakon™ Inputs On Each End (Monitors Only)

• Braced MDF Enclosures• Tough Black Carpet Finish

LoudspeakersEVP-R

Key Features

10

15" LF, Quasic 3-way, 4ohm, 45-20kHz (+/-3dB), 100dB (1W@1m),Power Rating: 700W Continuous, 1400W Music, 2800W Peak,Product Dimension (H x W x D):(MM): 1063 x 446.5/245.3 x 432.4(inches): 41.85" x 17.57"/9.65" x 17.02"Carton Dimension (H x W x D):(MM): 1150 x 520/330 x 496(inches): 45.27" x 20.47"/12.99" x 19.52"Net Weight: 35.34kg/77.80lbsGross Weight: 38.40kg/84.50lbs

EVP-R215

15" subwoofer, 4ohm, 45-250kHz (+/-3dB), 99dB (1W@1m),Power Rating: 400W Continuous, 800W Music, 1600W Peak,Product Dimension (H x W x D):(MM): 454 x 562 x 574.4(inches): 17.87" x 22.12" x 22.61"Carton Dimension (H x W x D):(MM): 560 x 650 x 635(inches): 22.04" x 25.59" x 25.00"Net Weight: 28.42kg/62.50lbsGross Weight: 34.90kg/76.80lbs

EVP-R15B18" subwoofer, 4ohm, 40-250kHz (+/-3dB), 100dB (1W@1m),Power Rating: 450W Continuous, 900W Music, 1800W Peak,Product Dimension (H x W x D):(MM): 531 x 611 x 609.5(inches): 20.90" x 24.05" x 23.99"Carton Dimension (H x W x D):(MM): 640 x 705 x 665(inches): 25.19" x 27.75" x 26.18"Net Weight: 34.52kg/75.90lbsGross Weight: 40.90kg/89.90lbs

EVP-R18B

EVP-R1515" LF, two-way, 8ohm, 50-20kHz (+/-3dB), 98dB (1W@1m),Power Rating: 350W Continuous, 700W Music, 1400W Peak,Product Dimension (H x W x D):(MM): 685 x 446.5/245.3 x 432.4(inches): 26.96" x 17.57"/9.65" x 17.02"Carton Dimension (H x W x D):(MM): 750 x 500/300 x 485(inches): 29.52" x 19.68"/11.81" x 19.09"Net Weight: 21.58kg/ 47.50lbsGross Weight: 24.30kg/ 53.50lbs

15" LF, two-way monitor, 8ohm, 45-20kHz (+/-3dB), 98dB (1W@1m),Power Rating: 350W Continuous, 700W Music, 1400W Peak,Product Dimension (H x W x D):(MM): 630 x 446.5 x 373.8(inches): 24.80" x 17.55" x 14.71"Carton Dimension (H x W x D):(MM): 735 x 520 x 475(inches): 28.93" x 20.47" x 18.70"Net Weight: 20.50kg/45.10lbsGross Weight: 24.00kg/52.80lbs

EVP-R15M

EVP-R

10" LF, two-way, 8ohm, 65-20kHz (+/-3dB), 97dB (1W@1m),Power Rating: 200W Continuous, 400W Music, 800W Peak,Product Dimension (H x W x D):(MM): 522 x 340/192 x 330(inches): 20.55" x 13.38"/7.55" x 12.99"Carton Dimension (H x W x D):(MM): 588 x 395/280 x 376(inches): 23.14" x 15.55"/11.02" x 14.80"Net Weight: 12.70kg/ 27.94lbsGross Weight: 14.20ks/ 31.30lbs

EVP-R10

12" LF, two-way, 8ohm, 60-20kHz (+/-3dB), 98dB (1W@1m),Power Rating: 250W Continuous, 500W Music, 1000W Peak,Product Dimension (H x W x D):(MM): 607 x 400/233 x 364(inches): 23.89" x 15.74"/9.17" x 14.33"Carton Dimension (H x W x D):(MM): 670 x 460/310 x 414(inches): 26.37" x 18.11"/12.20" x 16.29"Net Weight: 16.62kg/ 35.60lbsGross Weight: 18.90kg/ 41.60lbs

EVP-R12

Subwoofers

Full Range

Loudspeakers

12" LF, two-way monitor, 8ohm, 65-20kHz (+/-3dB), 98dB (1W@1m),Power Rating: 250W Continuous, 500W Music, 1000W Peak,Product Dimension (H x W x D):(MM): 550 x 400 x 314.3(inches): 21.65" x 15.74" x 12.37"Carton Dimension (H x W x D):(MM): 650 x 480 x 415(inches): 25.59" x 18.89" x 16.33"Net Weight: 15.20kg/ 33.44lbsGross Weight: 18.80kg/ 41.40lbs

EVP-R12M

11

Vector Series Loudspeakers

Vector was designed from the ground up to meet the demands of professional sound reinforcement. Wharfedale Pro have raised the bar for mid-format passive enclosures, with a price to performance ratio that exceeds all currently available loudspeakers.

Vector creates huge sound within a manageable footprint, ensuring portability while providing deep bass, great vocal projection and a clear top end. Heavy-duty painted enclosures are partnered with our all new, proprietary, low distortion, high output transducers and bespoke hardware to create a road worthy PA solution that stands above the competition.

The versatile design of the Vector full range enclosures facilitate use as vertically pole mounted FOH loudspeakers or as stage based wedge monitors, they are real utility boxes that give you maximum versatility whatever the scenario.All components are designed in house and built from the ground up in Wharfedale’s own vertically integrated factory, providing the consumer with world class performance and unparalleled value.

• Very High SPL Output Capability• High Sensitivity & Dynamic Range• Full Range Models Can Be Used As FOH or Stage Monitors• Custom 90°x 60° HF Waveguides• Custom High Output, Low Distortion Woofers• Custom Titanium Compression Drivers• Dual Layer Voice Coils(VECTOR 18B - Quad Layer)

Key Features• Heavy Duty, Painted Enclosures• HF Protection Circuitry• Parallel Wired Speakon/Jack Combination Inputs• Dual Angle Pole Mount Receptacles• Portable Footprint• 150Hz HPF With Speakon Output (VECTOR 18B)• Heavy Duty Castors (VECTOR 18B)

12

VECTOR

Passive 2-Way Utility Box, 60-20kHz Frequency Response (±3dB), 8 ohms Impedance, 98dB (1w@1m),Power Rating: 300W Continuous, 600W Music, 1200W Peak Product Dimension (H x W x D):(MM): 537 x 354 x 328(Inches): 21.15'' x 13.94'' x 12.91''Carton Dimension (H x W x D):(MM): 655 x 465 x 425(Inches): 25.79'' x 18.31'' x 16.73''Net Weight: 17.6kg/38.72lbsGross Weight: 21.5kg/47.3lbs

Vector 12

Passive 2-Way Utility Box, 50-20kHz Frequency Response (±3dB), 8 ohms Impedance, 98dB (1w@1m),Power Rating: 400W Continuous, 800W Music, 1600W Peak Product Dimension (H x W x D):(MM): 630 x 435 x 400(Inches): 24.8'' x 17.13'' x 15.75''Carton Dimension (H x W x D):(MM): 745 x 550 x 510(Inches): 29.33'' x 21.65'' x 20.08''Net Weight: 25.2kg/55.4lbsGross Weight: 29.3kg/64.5lbs

Vector 15

Passive 2-Way Utility Box, 60-20kHz Frequency Response (±3dB), 8ohms Impedance, 100dB (1w@1m),Power Rating: 600W Continuous, 1200W Music, 2400W Peak Product Dimension (H x W x D):(MM): 554 x 502 x 800(Inches): 21.81'' x 19.76''x 31.5''Carton Dimension (H x W x D):(MM): 660 x 590 x 885(Inches): 26'' x 23.23'' x 34.84''Net Weight: 45.1kg/99.2lbsGross Weight: 55.6kg/122.3lbs

Vector 18B

Subwoofers

Full Range

Quasi 3-Way, 45-20kHz Frequency Response (±3dB), 4ohms Impedance, 100dB (1w@1m),Power Rating: 800W Continuous, 1600W Music, 3200W Peak Product Dimension (H x W x D):(MM): 1060 x 446/225 x 433(Inches): 41.73'' x 17.56''/8.86'' x 17.05''Carton Dimension (HxWxD)(MM): 1180 x 560/340 x 546(Inches): 46.47'' x 22.05''/13.39'' x 21.5''Net Weight: 41.6kg/91.5lbsGross Weight: 48.4kg/106.5lbs

Vector 215

13

Full Range

2-Way, 8" LF, 70-20kHz Frequency Response (+/-3dB),4 ohm Impedance, 96dB (1w@1m),Power Rating: 150W Continuous, 300W Music, 600 PeakProduct Dimension (H x W x D):(MM): 429 x 272.2/149.6 x 253 (inches): 16.90" x 10.70"/5.90" x 9.96"Carton Dimension (H x W x D):(MM): 482 x 299/166 x 278(inches): 18.97" x 11.80"/6.54" x 10.90" Net Weight: 7.84kg/17.24lbsGross Weight: 8.80kg/19.36lbs

Kinetic 82-Way, 12" LF, 60-20kHz Frequency Response (+/-3dB),4ohm or 8ohm Impedance, 96dB (1w@1m),Power Rating: 200W Continuous, 400W Music, 800 PeakProduct Dimension (H x W x D):(MM): 525 x 362.2/210.1 x 308 (inches): 20.70" x 14.30"/8.27" x 12.13"Carton Dimension (H x W x D):(MM): 586 x 426/242 x 348(inches): 23.07" x 16.80"/9.53" x 13.70"Net Weight: 12.28kg/27.01lbsGross Weight: 13.80kg/30.36lbs

Kinetic 12

• Low Distortion, High Power Custom Wharfedale Pro Woofers• HF Compression Drivers• 90°x60° Elliptical Waveguides• High Slope Crossover With High Voltage Components• PTC HF Driver Protection Circuitry• Low Resonance Enclosures• Road-Tough Carpet Finish• High-Impact Plastic Handles• High-Impact Plastic Pole Mount Receptacles (Steel On Kinetic 153 & 18B)• Parallel Speakon/¼” Jack Inputs

Kinetic are passive loudspeakers that offer the next generation of legendary performance that Wharfedale Pro has become world famous for. Kinetic offers professional features such as compression drivers, custom designed woofers and PTC HF protection. Speakon/Jack Combination inputs are parallel wired for fl exibility and feature throughout the range to ensure compatibility and seamless integration with both professional and beginner equipment.

The Kinetic Series is suitable for a wide range of applications, they are an ideal choice for small bands or portable DJ’s that need heavy duty sound reinforcement on a budget.

LoudspeakersKinetic

Key Features

14

Subwoofer, 18" LF, 45-250Hz Frequency Response (+/-3dB),4ohm Impedance, 98dB (1w@1m),Power Rating: 300W Continuous, 600W Music, 1200 PeakProduct Dimension (H x W x D):(MM): 512 x 640 x 437(inches): 20.16" x 25.19" x 17.20"Carton Dimension (H x W x D):(MM): 579 x 686 x 483 (inches): 22.79" x 27.00" x 19.00"Net Weight: 28.74kg/63.22 lbsGross Weight: 31.60kg/69.52 lbs

2-way monitor, 12" LF, 60-20kHz Frequency Response (+/-3dB),4 ohm or 8 ohm Impedance, 96dB (1w@1m),Power Rating: 200 W Continuous, 400 W Music, 800 PeakProduct Dimension (H x W x D):(MM): 380(SITU) x 366 x 525(inches): 14.96" x 14.40" x 20.70"Carton Dimension (H x W x D):(MM): 413 x 568 x 386(inches): 16.26" x 22.36" x 15.20"Net Weight: 11.50kg/25.30lbsGross Weight: 13.70kg/30.14lbs

Kinetic 12M

2-way, 15" LF, 50-20kHz Frequency Response (+/-3dB),4 ohm or 8 ohm Impedance, 97dB (1w@1m),Power Rating: 250W Continuous, 500W Music, 1000 PeakProduct Dimension (H x W x D):(MM): 618 x 437.4/273.5 x 330 (inches): 24.30" x 17.20"/10.77" x 12.99"Carton Dimension (H x W x D):(MM): 680 x 502/304 x 370(inches): 26.77" x 19.76"/11.97" x 14.57"Net Weight: 17.02kg/37.44lbsGross Weight: 18.80kg/41.36lbs

Kinetic 15

3-way, 15" LF, 50-20kHz Frequency Response (+/-3dB),4 ohm Impedance, 98dB (1w@1m),Power Rating: 300W Continuous, 600W Music, 1200 PeakProduct Dimension (H x W x D):(MM): 725 x 473.8/293.7 x 360(inches): 28.54" x 18.65"/11.56" x 14.17"Carton Dimension (H x W x D):(MM): 786 x 538/324 x 400(inches): 30.95" x 21.18"/12.76" x 15.75"Net Weight: 21.50kg/47.30lbsGross Weight: 23.90kg/52.58lbs

Kinetic 153Quasi 3-way, 15" LF, 45-20kHz Frequency Response (+/-3dB),4 ohm Impedance, 100dB (1w@1m),Power Rating: 300W Continuous, 600W Music, 1200 PeakProduct Dimension (H x W x D):(MM): 1004 x 437.4/273.5 x 330(inches): 39.53" x 17.22"/10.78" x 12.99"Carton Dimension (H x W x D):(MM): 1172 x 538/324 x 400(inches): 46.14" x 21.18"/12.76" x 15.75"Net Weight: 25.40kg/55.88lbsGross Weight: 29.20kg/64.24lbs

Kinetic 215

Kinetic 18B

kinetic

Subwoofers

Loudspeakers

15

The all new Kinetic Active Series provides unbeatable power in an ultra-portable and cost effective package. The latest Class-D power amplifi er technology is matched to our custom drive units and audiophile crossovers to provide the next generation of legendary performance that Wharfedale has become world famous for.

The same features as the tried and tested Kinetic passive models ensure durability and great sound quality, with the convenience and performance benefi ts that a self-powered, bi-amplifi ed loudspeaker brings. The Kinetic Active Series are an excellent solution for small bands and portable DJ’s.

LoudspeakersKinetic Active

• Self Powered and Bi-Amplifi ed• Class D LF and HF Power Amplifi ers• Independent LF and HF Signal Limiting• Thermal, DC and Short Circuit Fault Protection• LF and HF EQ Controls• Integrated 2 Channel Mixer

Key Features

Full Range

Active 12" 2-way Bi-Amplifi ed,AC 100V-120V~/220V-240V~, 50/60HzLow Frequency Power (Class D): 220W RMS, 350W PeakHigh Frequency Power (Class D): 70W RMS, 140W PeakProduct Dimension (H x W x D):(MM): 525 x 362.2/210.1 x 308(Inches): 20.7" x 14.3"/8.27" x 12.13"Carton Dimension (H x W x D):(MM): 586 x 426/242 x 348(Inches): 23.07" x 16.8"/9.53" x 13.7"Net Weight: 13.26kg/29.2lbsGross Weight: 15.56kg/34.2lbs

Kinetic 12AActive 12" Amplifi ed monitorAC 100V-120V~/220V-240V~, 50/60HzLow Frequency Power (Class D): 400W 4 ohms, 200W 8 ohms RMS,700W 4 ohms, 400W 8 ohms PeakProduct Dimension (H x W x D):(MM): 380 x 366 x 525(Inches): 14.96" x 14.4" x 20.7"Carton Dimension (H x W x D):(MM): 413 x 568 x 386(Inches): 16.26" x 22.36" x 15.2"Net Weight: 13.68kg/30.1lbsGross Weight: 16.08kg/35.4lbs

Kinetic 12MA

• 2 x ¼" TRS Jack and XLR Mic/Line Level Inputs• Rear Panel Mic/Line Switching• Balanced XLR Line Level Output• Rear panel LED Limiting Indicator• Independent Volume Controls• Rugged Black Carpet Covered Enclosures

16

Active 15" 2-way Bi-Amplifi edAC 100V-120V~/220V-240V~, 50/60HzLow Frequency Power (Class D): 220W RMS, 350W PeakHigh Frequency Power (Class D): 70W RMS,140W PeakProduct Dimension (H x W x D):(MM): 618 x 437.4/273.5 x 330(Inches): 24.3" x 17.2"/10.77" x 12.99"Carton Dimension (H x W x D):(MM): 680 x 502/304 x 370(Inches): 26.77" x 19.76"/11.97" x 14.57"Net Weight: 18.7kg/41.14lbsGross Weight: 21.18kg/46.6lbs

Kinetic 15A Active 2 x 15" 2-way Bi-Amplifi edAC 100V-120V~/220V-240V~, 50/60HzLow Frequency Power (Class D): 400W RMS, 700W PeakHigh Frequency Power (Class AB): 70W RMS, 140W PeakProduct Dimension (H x W x D):(MM): 1004 x 437.4/273.5 x 330(Inches): 39.53" x 17.22"/10.78" x 12.99"Carton Dimension (H x W x D):(MM): 1172 x 538/324 x 400(Inches): 46.14" x 21.18"/12.76" x 15.75"Net Weight: 29.42kg/64.7lbsGross Weight: 33.2kg/73.04lbs

Kinetic 215A

kinetic Active

Active 18” Subwoofer Amplifi edAC 100V-120V~/220V-240V~, 50/60HzLow Frequency Power (Class D): 300W RMS, 600W PeakProduct Dimension (H x W x D):(MM): 512 x 640 x 437(Inches): 20.16" x 25.19" x 17.2"Carton Dimension (H x W x D):(MM): 579 x 686 x 483(Inches): 22.79" x 27.0" x 19.0"Net Weight: 31.6kg/69.52lbsGross Weight: 34.42kg/75.7lbs

Kinetic 18BA

Subwoofers

Loudspeakers

1

WPM-1The WPM-1 from Wharfedale Pro is a personal monitoring solution with a number of great features that suit performers and artists who demand perfect monitor mixes and total control. A 5” full range driver is matched to the on-board processing, EQ and amplifi cation to provide clear, natural and intelligible vocal foldback.

The WPM-1 can be stand mounted with straight or boom mic stands, alternatively the WPM-1 can be placed on the stage itself for maximum versatility. Front panel controls allow you to fi ne tune your onstage vocal sound and the integration of your monitor mix. With a WPM-1 you no longer get the monitor mix that your engineer supplies, you hear exactly what you want to hear.

The balanced microphone input has a through output so your performance can be seamlessly integrated into the front of house mix. The WPM-1 also includes an instrument/line level input and mix output, facilitating use as a small format personal mixer with 3 inputs. This versatile interfacing allows the WPM-1 to fi t into the widest range of on stage situations.

The WPM-1 uses the same high tech gas assist injection moulding techniques as used in our famous Titan Series loudspeakers, ensuring road tough reliability and ultra light portability.

of house mix. The WPM-1 also includes an instrument/line level input and mix output, facilitating use as a small format personal mixer with 3 inputs. This versatile interfacing allows the WPM-1 to fi t into the widest range of on stage situations.

The WPM-1 uses the same high tech gas assist injection moulding techniques as used in our famous Titan Series loudspeakers, ensuring road tough reliability and ultra light portability.

• Microphone, line/instrument and auxiliary inputs • Microphone thru, line and mix outputs • Vocal volume and EQ controls • Independent master and auxiliary level controls • Switchable output sensitivity • Ultra lightweight gas assist injection moulded enclosure • Dual angle mic stand receptacles and microphone mounting system • IEC receptacle for AC supply

5" Full Range Driver, 120-18kHz, AC 90-240V,Frequency Response (+/-3dB),Mic input: -45dBu (-0dBu/-20dBu)Mic EQ: Peak +/-15dB @ 2.1kHzPower Rating: 75W Continuous, 150W Music, Product Dimension (H x W x D):(MM): 260 x 246 x 182(inches): 10.23'' x 9.68'' x 7.16''Carton Dimension (H x W x D):(MM): 285 x 315 x 330(inches): 11.22'' x 12.40'' x 12.99''Net Weight: 3.50kg/7.70IbsGross Weight: 4.90kg/10.78Ibs

WPM-1

Loudspeakers

Key Features

18

Wharfedale Pro's Diamond Series has a heritage extending over twenty years, throughout its life it has been Britain's best-selling loudspeaker. This pattern has been repeated around the world with 5 star reviews and accolades in every country in which it has been available. As such the Diamond Series represents a de facto standard for sound quality and balance in a tremendous number of home stereo and A/V systems.

Built using the Diamond family transducers in specially designed enclosures, and with a custom designed bi-amplifi cation package, the Diamond Studio Active series is a complete and balanced system for two channel and 5.1 reference monitoring. Magnetic Shielding of the driver magnets allows close placement of the monitors to CRT displays. Whilst being true to their sonic heritage, the Studio Pro-Active reference monitors are refi ned and enhanced for the demands and duties of the recording business. Tighter enclosure damping and a large cubic volume give better control under high levels found in monitoring applications.

• Active Bi-amp design with 60W LF and 40W HF output power• Balanced XLR, 1/4" and unbalanced RCA inputs• Precision 25mm (1") soft-dome tweeter• Active electronic crossover for true Bi-amp operation• Bi-directional Kevlar weave woofer cone• Rear-mounted master gain control• Dual-layer vented LF voice coil• Switchable 1/2 space Bass fi lter• Fully shielded for use near CRT displays• Removable front grille

DIAMOND

Active 2-way, high-end studio reference monitor, 5" LF plus 1" HF, 60W LF + 40W HF, 50Hz-24kHz frequency response (+/-3dB), Mains Voltage: 230V Setting: 205-250V 115V Setting: 100-130V1/4" / XLR combo balanced connector, 1 RCA unbalanced Product Dimension (H x W x D):(MM): 295 x 198 x 280(inches): 11.61" x 7.80" x 11.02"Weight: 7.50kg/16.50Ibs

Diamond 8.1 PRO ACTIVEActive 2-way, high-end studio reference monitor, 6.5" LF plus 1" HF, 60W LF + 40W HF45Hz-24kHz frequency response (+/-3dB),Mains Voltage: 230V Setting: 205-250V 115V Setting: 100-130V1/4" / XLR combo balanced connector, 1 RCA unbalancedProduct Dimension (H x W x D):(MM): 364 x 212 x 322(inches): 14.33" x 8.35" x 12.68"Weight: 8.00kg/17.60Ibs

Diamond 8.2 PRO ACTIVE

Loudspeakers

Diamond

Key Features

1

The Wharfedale Pro EZGO is an innovative portable PA solution that is ideal for announcement, presentation and entertainment applications.

EZGO is simple to use and requires no specialist or technical knowledge to stage a professional performance. Its class leading usability is matched to genuine professional audio quality. Rapid setup and near non-existent take-down times ensure that EZGO will always keep your presentation stress free and professional. Audiences of up to 500 people are easily covered with the 70W amplifi er and dual 5” full range drive units.

The EZGO is battery or mains operated and is expandable via optional user installable modules that add USB or wireless microphone connectivity.

The retractable handle and recessed wheels make transportation easier than ever before, an optional tour bag provides additional protection during use and transit.

• Mains or Battery Operated• Retractable Luggage Style Carry Handle• 70W RMS 140W Peak Amplifi er• 2 x 5” Aluminium Cone Full Range Drivers• Pole Mount Receptacle• Tuned Port Tube Design• Optional Wireless Microphone and USB Modules

Full range, 60-18kHz, AC 100~240V, 50/60Hz, Frequency Response (+/-3dB), 4 ohms Impendance, 98dB (1w@1m), Power Output: 70W RMS, 140W PeakProduct Dimension (H x W x D):(MM): 468 x 247 x 360(inches): 18.43'' x 9.72'' x 14.20''Carton Dimension (H x W x D):(MM): 570 x 329 x 464(inches): 22.45'' x 12.95'' x 18.27''Net Weight: 12.20kg/26.84lbsGross Weight: 14.00kg/30.80lbs

Main Unit

Loudspeakers

• XLR Microphone Input• RCA Line Level Inputs• Peak and Power and Battery Level LED Indicators• 3 Band EQ• DC or IEC AC Receptacle• Worldwide Switch Mode Power Supply• Optional Tour Bag

Key Features

20

702-865 MHz Frequency Range, ±0.005% 5OC ~ +45OC Frequency Stability Dimension (D x H):(MM): Φ53 x 220(inches): Φ2.09’’ x 8.66’’Weight: 0.15kg/0.33lbs

EZGO-RDM

Receiving Mode: Point to point receiving Frequency Range: 702-865 MHz Bandwidth: 24MHz x 2 Channel Quantity: 100 Channel x 2 Image Rejection Ration: 45dB normal, 50dB maximum Signal-to-Noise Ratio: ≥95dB (±40kHz frequency deviation, A-weighted) Total Harmonic Distortion: ≤1% (1kHz, ±40k frequency deviation) Sensitivity: 10dBuV (1kHz, ±40k frequency deviation, S/N 65dB) Audio Output: 5.4V (RMS, 1kHz signal, 40kHz frequency deviation, 47k load)

EZGO-MIC

• Detachable Speaker Cover• Velcro Flap For Control Panel Access• Velcro Flap For Retractable Luggage Style Handle • Detachable Microphone Carry Bag• Zipper Pouch For Remote Control, Cables and USB Sticks

EZGO-BAG

USB Level Input: Infi nity to 40dB Input Sensitivity: -10dBu USB Drive: Support MP3 and WMA Playback Supported Sampling Rate: 8kHz, 11.025kHz, 16kHz, 22.05kHz, 32kHz, 44.1kHz, 48kHz USB to PC: Sound card for playback and recording on PC or Mac

EZGO-USB

EZGO-MIC

Optional Function Modules

EZGO-BAG

Loudspeakers

INSTALLATION LOUDSPEAKERS

INSTALLATION LOUDSPEAKERSSI-X 23PROGRAMME 25WP 2780 2890 29WLA 12 31Diva 33ACCESSORIES 35

23

The SI-X Series is a versatile fixed installation loudspeaker system designed for surface mount or flown applications. The angled low profile enclosures are designed to provide high SPL in an unobtrusive package.

Consistent voicing across the range ensures seamless coverage when using a variety of different models in distributed sound applications. The SI-X Series feature a 1” exit compression driver on a 70°x 70° conical waveguide providing open and detailed high frequency extension with even and predictable dispersion.

Because of their multi-faceted design the SI-X speakers can be positioned next to a stage, wall or ceiling. This versatility suits the SI-X Series to a diverse range of applications such as live performance halls, houses of worship, schools, shops, restaurants, bars and public houses.

The SI-X Series includes full range enclosures with woofer sizes ranging from 10” to 15”, a dual 8” woofer model is also available. The full range enclosures are complimented by 3 subwoofers for extended low frequency response and increased SPL. All models are available in black or white painted finishes and feature multiple M8 rigging points to suit the widest range of flown applications. Brackets are included as standard.

A Versatile Loudspeaker System for Surface Mount or Flown Applications

• 70°x70° conical waveguide • Internally braced MDF cabinets with multiple M8 threaded rigging inserts • "Coherent Wavefront" design for maximum articulation and flat response• Five-sided cabinet design for low profile ceiling installation or floor monitor use • Trapezoidal cabinets for building point-source arrays • High output, heavy duty woofers • All models available in paintable Black or White finish • 44mm (1.7") Titanium diaphragm compression drivers • Heavy duty foam-backed steel grille • Dual NL4 parallel input connectors

SI-X Installation Loudspeakers

Key Features

24

SubwoofersSubwoofers

10" 2-way, 60-20kHz frequency response (+/-3dB), 70 x 70 CWG 8 ohms system impedanceContinuous 200W / Music 400W / Peak 800WProduct Dimension (H x W x D):(MM): 512 x 294 x 310(inches): 20.20" x 11.60" x 12.20"Carton Dimension (H x W x D):(MM): 580 x 348 x 358(inches): 22.80" x 13.70" x 14.10"Net Weight: 13.60kg/29.92lbsGross Weight: 17.00kg/37.40lbs

SI-10X

12" 2-way, 60-20kHz frequency response (+/-3dB), 70 x 70 CWG 8 ohms system impedanceContinuous 250W / Music 500W / Peak 1000WProduct Dimension (H x W x D):(MM): 562 x 344 x 333(inches): 22.10" x 13.50" x 13.10"Carton Dimension (H x W x D):(MM): 630 x 408 x 371(inches): 24.50" x 16.10" x 14.60"Net Weight: 16.70kg/36.74lbsGross Weight: 20.00kg/44.00lbs

SI-12X

15" 2-way, 50-20kHz frequency response (+/-3dB), 70 x 70 CWG 8 ohms system impedanceContinuous 400W / Music 800W / Peak 1600WProduct Dimension (H x W x D)(MM): 640 x 422 x 396(inches): 25.20" x 16.60" x 15.60"Carton Dimension (H x W x D):(MM): 705 x 482 x 433(inches): 27.70" x 18.90" x 17.00"Net Weight: 22.00kg/ 48.40lbsGross Weight: 25.00kg/55.00lbs

SI-15X

2x8" 2-way, 60-20kHz frequency response (+/-3dB), 70 x 70 CWG 4 ohms system impedanceContinuous 250W / Music 500W / Peak 1000WProduct Dimension (H x W x D):(MM): 675 x 250 x 300(inches): 26.60" x 9.80" x 11.80"Carton Dimension (H x W x D):(MM): 740 x 338 x 313(inches): 29.10" x 13.30" x 12.30"Net Weight: 17.80kg/39.16lbsGross Weight: 21.00kg/46.20lbs

SI-28X

12" horn loaded subwoofer40-250Hz frequency response (+/-3dB) 4 ohms system impedanceContinuous 300W / Music 600W / Peak 1200WProduct Dimension (H x W x D)(MM): 302 x 650 x 545(inches): 11.90" x 25.60" x 21.50"Carton Dimension (H x W x D)(MM): 365 x 715 x 605(inches): 14.30" x 28.10" x 23.80"Net Weight: 37.70kg/82.94lbsGross Weight: 44.00kg/96.80lbs

SI-12BX15" horn loaded subwoofer38-220Hz frequency response (+/-3dB) 4 ohms system impedanceContinuous 450W / Music 900W / Peak 1800WProduct Dimension (H x W x D)(MM): 266 x 850 x 670(inches): 10.50" x 33.50" x 26.40"Carton Dimension (H x W x D)(MM): 329 x 913 x 733(inches): 12.90" x 35.90" x 28.90"Net Weight: 44.60kg/98.12bsGross Weight: 53.00kg/116.60lbs

SI-15BX18" subwoofer30-200Hz frequency response (+/-3dB) 4 ohms system impedanceContinuous 800W / Music 1600W / Peak 3200WProduct Dimension (H x W x D)(MM): 620 x 537 x 508(inches): 24.40" x 21.10" x 20.00"Carton Dimension (H x W x D)(MM): 685 x 600 x 575(inches): 26.90" x 23.60" x 22.60"Net Weight: 35.50kg/78.10lbsGross Weight: 44.00kg/96.80lbs

SI-18BX

SI-X

Full Range

Installation Loudspeakers

25

The Programme Series offers hi fi delity surface mount solutions for commercial install applications. Frequency response has been optimized to be smooth and natural across the vocal range for high intelligibility in diffi cult environments, while retaining the neutral and uncoloured sound essential for unobtrusive reproduction of background music. The discreet and stylish appearance of the Programme Series is designed to seamlessly integrate into any architectural environment.

100v or 70v line models are available throughout the range. The Programme Series features a separate low impedance input for connection to a low impedance amplifier; a mode switch bypasses the secondary coil of the line transformer, eliminating insertion loss. The combination of separate input and mode switch also protects the unit from incorrect connection to a 70/100v line system in low impedance mode.

All models are available with black or white enclosures that can be painted to match any decor.

Programme 105, 108, 205, 206 and 406 all feature M6 rigging points for three point rigging applications and an M8 bracket point compatible with omni-mount brackets, a wall mounting bracket is included.

• 2-way loudspeaker systems • Custom designed Wharfedale Pro transducers • 50-250 Watts Continuous Power Handling• High strength Trapezoidal cabinets• Pro-tech® (PTC/Bulb) driver protection • M6 or M8 rigging points

Hi Fidelity Surface Mount Solutions For The Most Demanding Architectural Installations

Full Range

2-Way, 5.25" high power woofer75-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 50W / Music 100W / Peak 200WProduct Dimension (H x W x D):(MM): 233.5 x 166 x 152(inches): 9.19" x 6.50" x 6.00"Carton Dimension (H x W x D):(MM): 290 x 402 x 223(inches): 11.40" x 15.90" x 8.78"Net Weight: 4.50kg(9.90lbs.)/5.12kg(11.20lbs)Gross Weight: 6.26kg(13.80lbs.)/6.86kg(15.10lbs)T Version includes line transformer with 2.5, 5, 10W(100V) & 1.25, 2.5, 5 & 10W(70.7V) taps

PROGRAMME 30E/30ET

2-Way, 6.5" high power woofer65-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 60W / Music 120W / Peak 240WProduct Dimension (H x W x D):(MM): 275 x 196 x 192(inches): 10.80" x 7.70" x 7.60"Carton Dimension (H x W x D):(MM): 326 x 488 x 256(inches): 12.80" x 19.20" x 10.10"Net Weight: 6.20kg(13.60lbs.)/8.06kg(17.70lbs)Gross Weight: 8.30kg(18.30lbs.)/10.16kg(22.40lbs)T Version includes line transformer with 10, 20, 40W(100V) & 5, 10, 20, 40W(70.7V) taps

PROGRAMME 35E/35ET

Installation LoudspeakersPROGRAMME

Key Features• Parallel spring crimp, barrier strip or SpeakonTM input connectors

• Supplied with adjustable heavy duty steel wall bracket• Models available with an internal 70v/100v Transformer (‘T’ version)

26

Subwoofers

2-way, 5" high power woofer75-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 80W / Music 160W / Peak 320WProduct Dimension (H x W x D):(MM): 304 x 184 x 205(inches): 11.97" x 7.20" x 8.10"Carton Dimension (H x W x D):(MM): 379 x 250 x 274(inches): 14.90" x 9.84" x 10.80"Net Weight: 5.22kg/11.60Ibs/6.30kg(13.90lbs)Gross Weight: 6.59kg/14.50Ibs/7.70kg(16.90lbs)T Version includes line transformer with 15, 30, 60W(100V) & 7.5, 15, 30, 60W(70.7V) taps

PROGRAMME 105/105T2-way, 8" high power woofer60-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 150W / Music 300W / Peak 600WProduct Dimension (H x W x D):(MM): 458 x 248 x 275(inches): 18.00" x 9.80" x 10.80"Carton Dimension (H x W x D):(MM): 543 x 311 x 346(inches): 21.40" x 12.30" x 13.60"Net Weight: 9.34kg/20.70Ibs/10.80(23.80lbs)Gross Weight: 12.70kg/27.90Ibs/15.20(33.40lbs)T Version includes line transformer with 30, 60, 120W(100V) & 15, 30, 60, 120W(70.7V) taps

PROGRAMME 108/108T

2-way, 2 x 5" high power woofers70-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 100W / Music 200W / Peak 400WProduct Dimension (H x W x D)(MM): 500 x 184 x 205(inches): 19.70'' x 7.20'' x 8.10''Carton Dimension (H x W x D)(MM): 585 x 250 x 274(inches): 23.00" x 9.84" x 10.80"Net Weight: 7.69kg/17.10Ibs/8.09kg(17.80lbs)Gross Weight: 9.45kg/20.80Ibs/10.46kg(23.00lbs)T Version includes line transformer with20, 40, 80W (100V) & 10, 20, 40, 80W (70.7V) taps

PROGRAMME 205/205T

2-way, 2 x 6.5" high power woofer65-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 150W / Music 300W / Peak 600WProduct Dimension (H x W x D):(MM): 660.5 x 215 x 275(inches): 26.00" x 8.50" x 10.80"Carton Dimension (H x W x D):(MM): 745 x 278 x 346(inches): 29.30" x 10.95" x 13.60"Net Weight: 11.36kg/25.20Ibs/13.86kg(30.50lbs)Gross Weight: 14.05kg/30.90Ibs/16.50kg(36.30lbs)T Version includes line transformer with 30, 60, 120W(100V) & 15, 30, 60, 120W(70.7V) taps

PROGRAMME 206/206T2-way,4 x 6.5" high power woofer60-20kHz frequency response (+/-3dB) 8 ohms system impedanceContinuous 250W / Music 500W / Peak 1000WProduct Dimension (H x W x D):(MM): 980 x 215 x 275(inches): 38.60" x 8.50" x 10.80"Carton Dimension (H x W x D):(MM): 1065 x 278 x 346(inches): 41.93" x 10.95" x 13.60"Net Weight: 17.80kg/39.60Ibs/20.30kg(44.70lbs)Gross Weight: 20.95kg/46.10Ibs/23.45kg(51.60lbs)T Version includes line transformer with 30, 60, 120W(100V) & 15, 30, 60, 120W(70.7V) taps

PROGRAMME 406/406T

Bass Refl ex Subwoofer, 8 ohms per input / 4 ohms both inputs paralelled, 45Hz -170Hz (-3dB), 98dB (1W(2.83v) @1m) at corner junction, Power handling (both input driven): 400W, Power handling (each input driven): 200W,Product Dimension (H x W x D):(MM): 372 x 585 x 356(inches): 14.65" x 23.00" x 14.00"Carton Dimension (H x W x D):(MM): 413 x 635 x 392(inches): 16.25" x 25.00" x 15.40"Net Weight: 18.40 kg(40.50 lbs.)Gross Weight: 22.00kg(48.40lbs)

PROGRAMME Sub

PROGRAMMEInstallation Loudspeakers

2

WP Series Loudspeakers

The Wharfedale Pro WP Series is the result of 80 years (from 1932-2012) of experience in the use, design and manufacture of professional loudspeaker products. We take great pride in its unique V-TECH construction and wide coverage design. Wharfedale Pro WP Series is the high quality, high power karaoke systems suitable for KTV, TRV and PTV use. All models are fi nished with durable fi nish and equipped with rigging point for hang application. Wharfedale Pro.has the technology and experience to bridge the worlds of consumer and professional sound.

• Lessen the dimension and the weight of the cabinet.• Increase the whole sound level based on the same diver unit and power.• Bass response is completely different from traditional loudspeaker. The mid-bass production is powerful and natural, so is the bass.

• Its high effi ciency and quality design of the driver unit allows the high power sound without distortion. WP series is among the highest power handling karaoke speaker in the market.

• V-TECH construction allows the coverage ranging from 90° x 120° to 0° x 120°and all degree shares balanced response.

• WP series, the most reliable high quality product, has gone through the latest and high standard test in Wharfedale Pro Anechoic Chamber.

• Its low loss design of crossover lessens the waste of amplifi er power in circuit board and promotes the effi ciency.

Key Features

2-way, 40-20kHz Frequency Response(+/-10dB)8 ohms Impedance, 93dB (1w@1m),Power Rating: 250W Continuous, 500W Music, 1000W PeakDimension (H x W x D):(MM): 504 x 300 x 300(Inches): 19.84'' x 11.81'' x 11.81''Net Weight: 13.5kg/29.7lbsGross Weight: 14.9kg/32.78lbs

WP 102-way, 55-20kHz Frequency Response(+/-10dB)8 ohms Impedance, 95dB (1w@1m),Power Rating: 200W Continuous, 400W Music, 800W PeakProduct Dimension (H x W x D):(MM): 560 x 260 x 309(Inches): 22.05'' x 10.24'' x 12.12''Net Weight: 13.7kg/30.14lbsGross Weight: 15.2kg/33.44lbs

WP 28

2-way, 65-20kHz Frequency response(+/-10dB)8 ohms Impedance, 93dB (1w@1m),Power Rating: 200W Continuous, 400W Music, 800W PeakProduct Dimension (H x W x D):(MM): 190 x 292 x 700(Inches): 7.48'' x 11.5'' x 27.6''Net Weight: 13.5kg/29.7lbsGross Weight: 15.1kg/33.22lbs

WP 45

28

80THE 80 SERIES is the latest model to join Wharfedale's range of professional installation loudspeakers. Its pedigree stems from the successful Prog. 30D, one of the accepted standards in CD Jukebox extension speaker installation and the ever popular 2180. It is an attractive 2 way system designed for wall or shelf mounting, equally at home in a portrait or landscape orientation.

The philosophy behind these loudspeakers is simple. To further extend Wharfedale's reputation for excellent sound quality whilst employing innovative design to give a distinctive yet discrete appearance to these loudspeaker systems.

Traditionally the loudspeaker placement in rooms has been dominated by the needs of stereo reproduction and consequently most positions are a compromise enforced by the directionality of conventional loudspeakers.

However, Wharfedale's innovative solution is to use the 'Baker Effect', a phenomenon fi rst noted in the 1930's. By mounting two hf drive units perpendicular to each other, and carefully contouring the crossover network, Wharfedale has been able to reproduce a dramatic stereo effect in almost any listening position.

• Dual HF Drivers for 'Baker Effect' • 8" Pulp Cone LF Drivers • Ferrofl uid Cooled Soft Dome HF Drivers

• Auto Resetting Thermal Overload Protection • 4 Terminal Spring Clip Input Connectors

20808ohms, 45Hz-20kHz (+/-3dB), 90dB (1W@1m),Power Rating: 50W Continuous, 100W Music, 200W Peak,Product Dimension (H x W x D): (MM): 274 x 456 x 200(inches): 10.79" x 17.95" x 7.87"Carton Dimension (H x W x D): (MM): 510 x 515 x 335(inches): 20.07" x 20.27" x 13.18"Net Weight: 14.84kg/32.64IbsGross Weight: 17.96kg/39.51Ibs




80

Key Features

2

Developed from the outstandingly successful 2180 series, the new 90 series increases the choice of speakers available for this specialist application. The 90 series offers increased power handling and impressively high sound pressure levels from a range of compact boxes. Among six models in the range, the brand new 5090 & 5190 range of robust, efficient loudspeakers is the ideal systems for Karaoke applications.

The units used in the 2090, 2190, 3190 & 4190 models are an 8 inch (200mm) re-enforced pulp cone woofer and a 25mm titanium dome HF unit, which is Ferrofluid cooled. All of the designs have auto-resetting thermal overload protection of the HF units as standard to ensure reliability and all models deliver over a frequency range of 40Hz to 20KHz. The powerful 8 inch (200mm) diameter woofer uses a high temperature 2 inch (50mm) voice coil and a selected pulp cone whilst the 25mm titanium dome tweeter is loaded by a wide band horn; and is protected by a re-entrant thermal overload system.

The 2090, 2190, 3190 & 4190 commercial loudspeaker's cabinet exterior can be re-painted to match your venue interior and blend in with the environment. Whilst the units are of a strong and rugged nature, the weight is not unmanageable with the top, bottom and rear areas on all models clear for bracket mounting.

The new 5090 and 5190 Karaoke systems have wide dispersion extra bass characteristic which is perfectly suitable for Karaoke applications. The 5090 & 5190 models are intended for wall mounting, though they can be stand mounted. They can also be flown using the fixing screws in the top of the loudspeakers. Both models are also available in a high quality piano finish (PU Version) for premium installation applications.

• HF driver protection circuit • Extensive mounting points • High power output, low distortion sound quality • Easy vertical or horizontal mounting • M10 x13 rigging point for easy installation

Installation Loudspeakers90

Key Features

30

5090 5190

2090


4 ohms, 40Hz-15kHz (+/-3dB), 91dB (1W@1m),Power Rating: 350W Continuous, 350W Music, 700W Peak,Product Dimension (H x W x D): (MM): 576 x 368 x 295(inches): 22.68" x 14.49" x 11.61"Carton Dimension (H x W x D): (MM): 684 x 438 x 416(inches): 26.92" x 17.24" x 16.37"Net Weight: 17.60kg/38.72IbsGross Weight: 21.14kg/46.50Ibs


90

Full Range

5090

3190




2190


31

A Wharfedale Pro 400w Is Louder Than Competitors 1000w Line Array Products.

Why? The Wharfedale Pro WLA-12 is fully horn-loaded, it has three horn loaded compression drivers and a horn loaded woofer.

The Wharfedale Pro WLA-12 line array produces huge amounts of SPL, yet only requires modest amplification. The ultra high sensitivity design means that you spend less on your amplification and get more level. All of the amplifier energy is converted to pure SPL to give you the biggest output level possible for your budget.

A single WLA-12 element produces a massive 134dB peak SPL, considerably more than many competitors dual 12” line array elements.

The WLA-12 isn't all about volume, it provides high-quality sound reinforcement and reproduction that is unheard of in this class. The low distortion woofer and neodymium compression drivers are super accurate and are able to reproduce precisetransients with impressive detail. The vocal projection of WLA-12 is second to none. All transducers are coupled to well designed horns that provide a perfect balance of projection and dispersion.

Another saving? The WLA-12 has a built-in passive crossover network and physically aligned transducers. The benefit to you is again less amplification and no need for DSP or speaker management, the total system cost comes down again and you get a loud, great sounding line array with a minimum of fuss. It just works.

The intuitive captive rigging hardware and tethered quick release pins ensure that the WLA-12 is simple to fly with a variety of splay angles, giving you the widest range of configurations.

The WLA-12 is a complete line-array system, with a Fly-Frame and Dolly system available separately.

• High Sensitivity, Full Horn Loaded Design• 400W/800W/1600W Power Handling• 12” Horn Loaded LF Driver• 3” LF Voice Coil• 3x 1” Exit HF Compression Drivers• 1.8” Polyester HF Diaphragms• Rare Earth Magnets• Physically Aligned Transducers• Internal Passive Crossover Network

• External Crossover Bypass Switching• Front Hinged Rigging System• Captive Rigging Hardware with Tethered Quick Release Pins• Comprehensive Adjustable Splay Angles• Tethered Quick Release Pins (Each Rated To 2000Kg)• Rhino Rock™ Textured Composite Finish• Trapezoid Baltic Birch Plywood Enclosure• 2x Parallel Speakon Inputs• Constant directivity waveguides

Installation LoudspeakersWLA 12

Key Features

32

WLA1212" LF, Full Rang, 8 ohms, 180-18kHz (+/-3dB), 106dB (1W@1m),Power Rating: 400W Continuous, 800W Music, 1600W Peak,Product Dimension (H x W x D):(mm): 930 x 483/376 x 489(inches): 36.61" x 19.01"/14.80 x 19.25"Carton Dimension (H x W x D):(mm): 1025 x 585/530 x 580 (inches): 40.35" x 23.03/20.86" x 22.83"Net Weight: 61.00kg/134.20lbsGross Weight: 73.00kg/160.60lbs

Fly FrameProduct Dimension (H x W x D):(mm): 934 x 800 x 280(inches): 36.77" x 31.49" x 11.02"Carton Dimension (H x W x D):(mm): 955 x 307 x 827(inches): 37.59" x 12.08" x 32.55"Net Weight: 63.00kg/138.60lbsGross Weight: 69.00kg/151.80lbs

DollyProduct Dimension (H x W x D):(mm): 971 x 390 x 179.6 (inches): 38.22" x 15.35" x 7.07"Carton Dimension (H x W x D):(mm): 995 x 190 x 417(inches): 39.17" x 7.48" x 16.41"Net Weight: 8.40kg/18.48lbsGross Weight: 11.80kg/25.96lbs

WLA 12

Full Range


33

• 2-way co-axial loudspeakers• 2” titanium compression driver• 6” or 8” low distortion high power woofers• Spheroid ported enclosures• Durable high strength polypropylene construction• Infi nitely adjustable mounting bracket

• Quick and simple to install• Phoenix input connector• Front panel adjustable 70.7/100 volt transformer• Integral cable management• Suitable for horizontal or vertical placement

The DivaTM Series are stylish and subtle surface mount installation loudspeakers built upon many years of research and development.

The distinctive spheroid ported cabinets eliminate internal standing waves improving effi ciency and low frequency output. The DivaTM Series are available with a black or white enclosure that can be painted to match any decor, enhancing their suitability for style conscious environments.

A proprietary mounting system makes installation effortless, once the mounting is attached to the wall the speaker is easily attached by pushing it onto the brackets spring loaded latch. At this stage your hands are now free to make the wiring connections and angle adjustments, 120°x90° of pan and tilt are available to ensure accurate positioning and perfect coverage. A single hex nut is used to lock the mechanism, ensuring that your speaker stays in the correct position.

Based on a 2-way co-axial design the DivaTM Series use 6” or 8” custom Wharfedale Pro transducers with a 2” diaphragm, 1.2” exit titanium compression driver on a coaxially mounted waveguide. The DivaTM Series have a very wide frequency response and are capable of impressive sound pressure levels.

A 70.7 / 100 volt line matching transformer ensures impedance matched connectivity with your high impedance amplifi er or external line transformer. The 70.7 power tap has 7.5W, 15W, 30W and 60W modes while the 100 volt power tap has 15W, 30W and 60W modes. A low impedance (8Ω) setting allows connectivity to a low impedance amplifi er.


Key Features

Diva 552-way co-axial loudspeaker, 8 ohms Impedance, 75Hz-20kHz Frequency Response (+/-3dB), 85dB(1w@1m)Transformer Power taps: 70 volt - 7.5W, 15W, 30W, 60W, 100 volt - 15W, 30W, 60WProduct Dimension (H x W x D):(MM): 390 x 221 x 246(inches): 15.35" x 8.70" x 9.69"Carton Dimension (H x W x D):(MM): 472 x 282 x 382(inches): 18.58" x 11.10" x 15.04"Speaker Weight: 6.38kg/14.1lbsBracket Weight: 0.8kg/1.76lbs

34

Diva 82-way Co-axial, 8 ohms, 60Hz-20kHz(+/-3dB), 90dB (1W@1m), Transformer Power taps: 70 volt - 7.5W, 15W, 30W, 60W100 volt - 15W, 30W, 60WProduct Dimension (H x W x D): (MM): 484 x 275 x 305 (inches): 19.06" x 10.83" x 12.01"Carton Dimension (H x W x D): (MM): 620 x 475 x 345 (inches): 24.41" x 18.70" x 13.58"Net Weight: 11.80 kg/25.96lbsGross Weight: 14.50kg/31.90lbs

Diva 8 Diva 8S2-way co-axial loudspeaker, 16 ohms Impedance, 65Hz-20kHz Frequency Response (+/-3dB), 90dB(1w@1m)Power Handling: 100W/200W/400WProduct Dimension (H x W x D):(MM): 484 x 275 x 305 (inches): 19.06" x 10.83" x 12.01"Carton Dimension (H x W x D):(MM): 620 x 475 x 345 (inches): 24.41" x 18.70" x 13.58"Net Weight: 8.28kg/18.22lbsGross Weight: 11.80kg/25.96lbs

Full Range


Diva 6S2-way co-axial loudspeaker, 16 ohms Impedance, 105Hz-20kHz Frequency Response (+/-3dB), 85 dB(1w@1m)Power Handling: 60W/120W/240WProduct Dimension (H x W x D):(MM): 390 x 246 x 221(inches): 15.35" x 9.69" x 8.70"Carton Dimension (H x W x D):(MM): 480 x 385 x 285(inches): 19.00" x 15.16" x 11.22"Net Weight: 5.1kg/11.22lbsGross Weight: 8.50kg/18.70lbs

Diva 62-Way Co-axial, 8 ohms, 60Hz-20kHz(+/-3dB), 90 dB(1W@1m),Transformer Power taps: 70 volt - 6.25W, 12.5W, 25W, 50W100 volt - 12.5W, 25W, 50W 8 ohms - 70WProduct Dimension (H x W x D): (MM): 390 x 246 x 221(inches): 15.35" x 9.69" x 8.70"Carton Dimension (H x W x D): (MM): 480 x 385 x 285 (inches): 19.00" x 15.16" x 11.22"Net Weight: 7.20kg/15.84IbsGross Weight: 9.60kg/21.12Ibs

35

SP-1 SP-2SP-1 35mm/900mm pole for any pole mountSP-2 35mm/900mm pole with thread

WPB-1 WPB-2 WPB-3 WPB-4 WPB-5

The WPB-5 is attached to an appropriate mounting surface using any suitable combination of the 10 mounting points that are provided. Your loudspeaker is then attached to the bracket using 4 threaded inserts. A WPB-5 provides secure and versatile mounting with control over both pan and tilt, 0º to 40º of downward tilt are available.

The WPB-1 is suitable for all Wharfedale pro loudspeakers that feature an omnimount 60.0 footprint on the base of the enclosure, including Si (X versions) and Titan 12/15 passive and active versions.

The WPB-2 is suitable for all Wharfedale pro loudspeakers that feature a pole mount socket and are under 22Kg in weight.

The WPB-4 is suitable for all Wharfedale pro loudspeakers that feature an OmnimountTM 30.0 footprint on the rear of the enclosure, or Programme 105, 105T, 108, 108T, 205, 205T, 206, 206T.

WPB-1

WPB-2

WPB-3

WPB-4

WPB-5

Titan 8-xx--

Titan 12xx---

Titan 15xx---

Programme---xx

SI-Xx---x

Kinetic-x---

EVP-X-x---

EVP-R-x---

Installation LoudspeakersAccessories

SP-1 35mm/900mm pole for any pole mount

The WPB-2 is suitable for all Wharfedale pro loudspeakers that feature a pole mount socket and are under 22Kg in weight.

Vector-x---

36

SR 806 39 SL Mixers 40Connect Mini Mixers 41PMX Power Mixers 43PMX Systems 44Force 45S Amplifi ers 46MP Amplifi ers 47DW Amplifi ers 48WX Amplifi ers 49XO Crossovers 51LMX-204 Crossovers 52WPL-26 Speaker Switching System 53WPR-26MKII Speaker Switching System 54Q Equalisers 55

ELECTRONICSELECTRONICS

3

The Wharfedale Pro SR806 is a studio/live mixing console with a versatile feature set that suits it to a broad spectrum of applications.

The internally impedance balanced circuitry ensures that crosstalk and interference are kept to a minimum, in conjunction with the studio grade mic preamps the SR806 helps you produce dynamic, quiet and natural mixes with very low distortion.

5 auxiliary sends can be used to feed monitor mixes, the internal FX units or a subwoofer. The dedicated subwoofer send has a switchable 80/120Hz LPF and facilitates clean low end content, you can direct the kick and bass to the subs while avoiding boomy vocals and acoustic guitar.

The 2 built in 192kHz 24 bit FX processors each have a choice of 56 effects to add a creative edge to your mix without the need for extra equipment and expense.

Comprehensive metering with PFL/AFL on all channels/sends allows you to observe correct gain structure with ease. A break button cuts out all of the mic inputs and routes the tape input to the master section should you encounter any nasty situations.

• Internally impedance balanced circuitry • 8 mono channels -XLR / ¼” TRS inputs with HPF -Studio grade microphone preamps -25dB pad -3 band parametric EQ -48v phantom power • 4 stereo channels -¼” TRS inputs -4 band EQ • 2x 192kHz/24 bit FX processors • 4 stage metering per channel

Mid-Format Mixer

• 12 stage master metering • PFL on all channels • AFL on all sends • 5 auxiliary sends -2 monitor mixes -1 subwoofer output with LPF -2 FX sends • 4 sub groups with direct outs • Stereo RCA line level input • Break button • XLR and ¼” TRS main outputs

SR 806Max input level: Mic In: +10dBu Line In: +20dBuMax output level: +22dBu ±1dBuHeadphone: Over 150mW @ 32 ohmsFrequency Response: 20Hz-20kHz (+/-1dB)Input Channel EQ (shelving): High (+/- 15dB) 12kHzMid (+/- 15dB) 300Hz-6KHzLow (+/-15dB) 80HzProduct Dimension (H x W x D):(MM): 534 x 477 x 119(inches): 21.02'' x 18.78'' x 4.69''Carton Dimension (H x W x D):(MM): 670 x 581 x 213(inches): 26.38'' x 22.87'' x 8.39''Net Weight: 11.50kg/25.30IbsGross Weight: 13.50kg/29.70Ibs

ElectronicsSR 806

Key Features

40

SL Series mixers are studio/live mixing consoles with built-in full duplex USB interfacing.

Designed to cater for a wide range of mid format mixing duties, the SL Series includes many features suited to both live sound and home studio applications.

A high quality class-compliant 2-input 2-output 16-bit/48kHz USB interface features a fl exible record bus and dedicated return channel that is great for live and home recording.

Studio grade microphone preamps are used throughout the range and have balanced XLR inputs, with all channels also offering balanced/unbalanced TRS line level connectivity. In addition all of the mono channels have a TRS insert point.

An ultra musical 3-band EQ is available on all channels, with an additional high pass fi lter on the mono channels. A built in FX processor with 16 presets gives you unlimited creative potential and is supplemented by a dedicated FX send and 2 auxiliaries.

SL Series Mixers

• Full duplex 2in/2out 16-bit 48kHz USB interface • Studio grade phantom powered microphone pre-amps • Ultra musical 3 band EQ with high pass fi lters

• Pan and Balance controls • Control room and headphone outputs • Master outputs with XLR and TRS connectors

SL 424 USB

SL 824 USBSL 824 USBMaximum Balanced Output Level (1%T.H.D. at 1kHz): Main XLR Balanced Out +26.5dBu ±1dBuMain 1/4" Jack Balanced Out +26.5dBu ±1dBuMaximum Unbalanced Output Level (1%T.H.D. at 1kHz): Main XLR Unbalanced Out +21dBu ±1dBuMain 1/4" Jack Unbalanced Out +21dBu ±1dBuHeadphone Output 150mW ±5mW @ 32 ohmsFrequency Response: 20Hz~20kHz ±2dBProduct Dimension (W x D x H):(MM): 80 x 400 x 369(inches): 3.15" x 15.75" x 14.53"Carton Dimension (W x D x H):(MM): 510 x 480 x 190(inches): 20.08" x 18.90" x 7.48"Net Weight: 5.20kg/11.44lbsGross Weight: 6.20kg/13.64lbs

SL 1224 USBMaximum Balanced Output Level (1%T.H.D. at 1kHz): Main XLR Balanced Out +26.5dBu +/-1dBuMain 1/4" Jack Balanced Out +26.5dBu +/-1dBuMaximum Unbalanced Output Level (1%T.H.D. at 1kHz): Main XLR Unbalanced Out +21dBu +/-1dBuMain 1/4" Jack Unbalanced Out +21dBu +/-1dBuHeadphone Output 150mW +/-5mW @ 32 ohmsFrequency Response: 20Hz~20kHz +/-2dBProduct Dimension (W x D x H):(MM): 80 x 400 x 475 (inches): 3.15" x 15.75" x 18.70"Carton Dimension (W x D x H):(MM): 510 x 586 x 190 (inches): 20.08" x 23.07" x 7.48"Net Weight: 6.85kg/15.07lbsGross Weight: 8.05kg/17.71lbs

Maximum Balanced Output Level (1%T.H.D. at 1KHz ):Main XLR Balanced Out +26.5dBu ±1dBu Main ¼" Jack Balanced Out +26.5dBu ±1dBuMaximum Unbalanced Output Level (1%T.H.D. at 1KHz ):Main XLR Unbalanced Out +21dBu ±1dBuMain ¼" Jack Unbalanced Out +21dBu ±1dBuHeadphone Output 150mW ±5mW @ 32 ohmsFrequency Response: 20Hz~20kHz ±2dBProduct Dimension (H x W x D):(MM): 248 x 265 x 92.5(inches): 9.76" x 10.43" x 3.64"Carton Dimension (H x W x D):(MM): 365 x 136 x 343(inches): 14.37" x 5.35" x 13.50"Net Weight: 2.70 kg/5.94IbsGross Weight: 4.26 kg/9.37Ibs

SL

Electronics

Key Features

41

Connect Series Compact MixersThe Connect Series from Wharfedale Pro are high quality micro-mixers that are suitable for a wide range of applications.

Professional big mixer features such as Phantom powered, balanced XLR microphone inputs give you full functionality and great sound in an ultra compact and cost effective package that is ideal for live sound, home studio recording and fi xed installations. The Microphone pre-amplifiers use the same high quality components and construction methods that are employed in the recently released SL Series Mixers.

All Connect Series models feature an intuitive, ergonomically designed user interface that is excellent for beginners and professionals alike. Comprehensive connectivity ensures that a Connect mixer will fi t into any situation you need.

• Switchable global +48V phantom power• Clip LED's on mic/line channels• Balanced XLR Mic Inputs• Pan/Balance Controls On All Channels

• Stereo channels with balanced/unbalanced ¼" TRS jacks• Separate Main Mix and Phones outputs with level controls• Stereo 4 segment LED meters• Stereo ⅛” and ¼" headphone outputs

Maximum Output Level: +22dBu Maximum Headphone Output Level: >150mW @ 32 ohmsTHD: <0.0025% @ +14dBu Frequency Response: 20Hz - 20kHz ±1dBMaximum Input Levels: Mic In: +10dBu, Line In: +20dBu, 2TK IN: +20dBuProduct Dimension (H x W x D):(MM): 50.9 x 143 x 183.8(inches): 2.00" x 5.63" x 7.24"Carton Dimension (H x W x D):(MM): 253 x 77 x 226 (inches): 9.96" x 3.03" x 8.90"Net Weight: 0.66kg/1.45lbsGross Weight: 1.64kg/3.60lbs

Connect 502Maximum Output Level: +22dBu Maximum Headphone Output Level: >150mW @ 32 ohmsTHD: <0.0025% @ +14dBu Frequency Response: 20Hz - 20kHz ±1dBMaximum Input Levels: Mic In: +10dBu, Line In: +20dBu, USB in: +10dBuProduct Dimension (H x W x D):(MM): 50.9 x 143 x 183.8(inches): 2.00" x 5.63" x 7.24"Carton Dimension (H x W x D):(MM): 253 x 77 x 226 (inches): 9.96" x 3.03" x 8.90"Net Weight: 0.64kg/1.40IbsGross Weight: 1.62kg/3.56Ibs

Connect 502 USB

Electronics

Key Features

42

Maximum Output Level: +22dBuMaximum Headphone Output Level: >150mW @ 32 ohmsTHD: <0.0025% @ +14dBu Frequency Response: 20Hz-20kHz ±1dBMaximum Input Levels: Mic In: +10dBu, Line In: +20dBu, 2TK IN: +20dBuProduct Dimension (H x W x D):(MM): 50.9 x 208 x 183.8(inches): 2.00" x 8.19" x 7.24"Carton Dimension (H x W x D):(MM): 311 x 77 x 226(inches): 12.24" x 3.03" x 8.90"Net Weight: 0.95kg/2.09lbsGross Weight: 1.93kg/4.24lbs

Connect 802Maximum Output Level: +22dBuMaximum Headphone Output Level: >150mW @ 32 ohmsTHD: <0.0025% @ +14dBu Frequency Response: 20Hz-20kHz ±1dBMaximum Input Levels: Mic In: +10dBu, Line In: +20dBu, USB in: +10dBuProduct Dimension (H x W x D):(MM): 50.9 x 208 x 183.8(inches): 2.00" x 8.19" x 7.24"Carton Dimension (H x W x D):(MM): 311 x 77 x 226(inches): 12.24" x 3.03" x 8.90"Net Weight: 0.92kg/2.02IbsGross Weight: 1.90kg/4.18Ibs

Connect 802 USB

CONNECT

Maximum Balanced Output Level: +26dBu ±1dBuMaximum Unbalanced Output Level: +21dBu ±1dBuHeadphone output 150mW ±5mW @ 32 ohmsTHD+N: <0.019% @ + 14dBu ±0.5dBuFrequency Response: 20Hz~20kHz ±1dBMaximum Input Level: Mic +4dBu ±1dBuChannel Line +25dBu ±1dBu Stereo Line +25dBu ±1dBu2TK IN +25dBu ±1dBuDimensions (H x W x D):(MM): 293.9 x 183.8 x 52.8(Inch): 11.6" x 7.3" x 2.1"Weight: 1.37kg/3.02lbs

Connect 1002FXMaximum Balanced Output Level: +26dBu ±1dBuMaximum Unbalanced Output Level: +21dBu ±1dBuHeadphone output 150mW ±5mW @ 32 ohmsTHD+N: <0.025% @ + 14dBu ±0.5dBuFrequency Response:20Hz~20kHz ±1dBMaximum Input Level: Mic +4dBu ±1dBuChannel Line +25dBu ±1dBuStereo Line +25dBu ±1dBu2TK IN +25dBu ±1dBuDimensions (H x W x D):(MM): 360.1 x 183.8 x 52.8(Inch): 14.2" x 7.3" x 2.1"Weight: 1.69kg /3.73lbs

Connect 1202FX

Electronics

43

PMX Series Powered MixersThe PMX Series from Wharfedale Pro are lightweight, compact and portable powered mixers.

Designed to be a perfect balance of portability and power the PMX Series are suitable for use in a wide range of portable sound applications. Everything you need to mix and amplify microphones and line level sources is included in one box, with an ergonomic carry handle to aid transportation. The one box concept speeds up your setup time and allows you to start your performance quicker than ever before.

All models feature built in digital FX processing, expanding your creativity and improving your sound quality without the need for additional expensive and often cumbersome processors. A graphic EQ allows fi ne tuning of the overall mix; the PMX 700 and PMX 710 have a fl exible routing system that allows you to EQ your front of house and monitor speakers in mono or your front of house in stereo.

Phantom powered XLR microphone inputs allow you to connect any type of microphone, line level inputs are available with both ¼” jacks and RCA connectors. The PMX710 includes a full-duplex USB playback and record interface and pan/balance controls. The main outputs use Speakon™/¼” jack Combi connections for maximum reliability and versatility.

• Lightweight Class-D Amplifi er Modules• Lightweight, High-Effi ciency Switch-Mode Power Supplies• Phantom Powered Balanced XLR Mic Inputs• ¼” Jack and RCA Line Level Inputs• Peak Indicator for Each Channel

PMX 710

• Built-in Digital FX• Graphic EQ on Master Section• 4 Segment LED Metering• ¼” Jack/Speakon™ Main Outputs

Power Output: 150W into 4 ohms RMS,AC 100-120V~/220-240V, 50/60Hz, Frequency Response: 45Hz-20kHz +1/-2dBInput Channel EQ (MONO): High (+/-15dB) 12kHzLow (+/-15dB) 100kHzProduct Dimension (H x W x D):(MM): 392 x 261 x 243 (inches): 15.43" x 10.27" x 9.56"Carton Dimension (H x W x D):(MM): 440 x 295 x 329 (inches): 17.32" x 11.61" x 12.95"Net Weight: 4.65kg/10.23Ibs

PMX 500Power Output: 2 x 150W into 4 ohms RMS, AC 100-120V~/220-240V, 50/60Hz, Frequency Response: 20Hz-20kHz +1/-2dBInput Channel EQ (MONO): High (+/-15dB) 12kHzMid (+/-15dB) 2kHzLow (+/-15dB) 100kHzProduct Dimension (H x W x D):(MM): 392 x 261 x 243 (inches): 15.43" x 10.27" x 9.56"Carton Dimension (H x W x D):(MM): 440 x 295 x 329 (inches): 17.32" x 11.61" x 12.95"Net Weight: 5.45kg/11.99Ibs

PMX 700

Power Output: 2 x 250W into 4 ohms RMS, AC 100-120V~/220-240V, 50/60Hz, Frequency Response: 40Hz-20kHz +1/-2dBInput Channel EQ (MONO): High (+/-15dB) 12kHzMid (+/-15dB) 2kHzLow (+/-15dB) 100HzProduct Dimension (H x W x D):(MM): 392 x 261 x 243 (inches): 15.43" x 10.27" x 9.56"Carton Dimension (H x W x D):(MM): 440 x 295 x 329 (inches): 17.32" x 11.61" x 12.95"Net Weight: 5.70kg/12.54IbsGross Weight: 6.90kg/15.18Ibs

Electronics

Key Features

44

PMX SystemThe Wharfedale Pro PMX System provides you with everything you need to get up and running for a public performance. A PMX System is a cost effective, high quality solution that is ultra portable and suitable for both beginners and professionals alike. Systems are available that are based around the PMX500 and PMX700 powered mixers.

A PMX System package comprises of a PMX powered mixer, a pair of 2-way loudspeakers (PTX-8 with the PMX 500 System and PTX-12 with the PMX700 System), a DM1.0 dynamic microphone and all the necessary cables to connect the system.

Setting up a PMX System has been designed to be simple even for absolute beginners, a basic vocal PA can be created in a matter of minutes even if you have no professional audio experience. Adding more equipment is simple and ensures that a PMX System can grow with your needs.

• 1x PMX powered mixer• 2x PT-X 2-way loudspeakers• 1x DM 1.0 dynamic microphone

• 1x 4.5m microphone cable• 2x speaker cables

PMX

Electronics

Key Features

Power Mixer: PMX 500 SystemOutput: 150W @ 4Ω Passive Loudspeakers: (Model: PT-X8 Quantity: 2 NominalCoverage: 900 x 600)Power Handling: 75W / 150W / 300WNominal Impedance: 8ΩLF Driver size: 205mm / 8"HF Material: PhenolicAC 100-120V~/220-240V~, 50/60Hz Product Dimension (H x W x D):(MM): 429 x 280.7/146.7 x 250 (inches): 16.9 x 11.1/5.8 x 9.8Microphone: (Model: DM 1.0 Type: Dynamic Magnet material: Neodymium Polar pattern: Cardiod Connector: 3-pin gold plated balanced male XLR)Carton Dimension (H x W x D):(MM): 584 x 305 x 795 (inches): 22.99" x 12.00" x 31.29"Net Weight: 21.50kg/47.30IbsGross Weight: 25.00kg/55.00Ibs

Power Mixer: PMX 700 SystemOutput: 150W @ 4Ω x 2Passive Loudspeakers: (Model: PT-X12 Quantity: 2 Nominal Coverage: 900 x 600)Power Handling: 250W / 500W / 1000WNominal Impedance: 4ΩLF Driver size: 305mm / 12"HF Material: PhenolicAC 100-120V~/220-240V~, 50/60HzProduct Dimension (H x W x D):(MM): 525 x 370.7/207.3 x 305 (inches): 20.7 x 14.6/8.2 x 12Microphone: (Model: DM 1.0 Type: Dynamic Magnet material: Neodymium Polar pattern: Cardiod Connector: 3-pin gold plated balanced male XLR)Carton Dimension (H x W x D):(MM): 779 x 355 x 907 (inches): 30.66" x 13.97" x 35.70"Net Weight: 33.50kg/73.70IbsGross Weight: 39.50kg/86.90Ibs

PMX 500 System PMX 700 System

45

ForceDesigned to be a perfect balance of portability and power the FORCE 12 is suitable for use in a wide range of portable sound applications. Everything you need to mix and amplify microphones and line level sources is included in one box,with an ergonomic carry handle to aid transportation.

The FORCE 12 features built-in digital FX processing, removing the need for additional expensive and often cumbersome processors. The included graphic EQ can be used to tame feedback issues and allows fi ne tuning of the overall mix. A mode switch allows the onboard amplifi cation to be used to power either stereo front of house loudspeakers or a mono front of house and mono foldback monitor system. Class compliant USB connectivity is included for quick and simple connection to a laptop computer for playback or recording.

Electronics

• 500W x 2@4Ohms (RMS), 300W x 2@8Ohms (RMS), 1300W x 2@4Ohms (Peak)

• 12 channels (8 mono & 2 stereo, play & record)• 10 Line inputs (6 Line, 2 Hi-z, 2 stereo)• 8 Mic inputs with switchable global + 48V phantom power• Optional RCA & USB connections for 1 stereo channel• Parallel RCA & Line connections for 1 stereo channel• 3-band EQ control for each mono channel• 2-band EQ control for each stereo channel• Dual 7-band Graphic EQs with routing switch• 10 channel peak LED indicators and 1 Effects peak LED indicator

Key Features• Dual 7-band Master Level LED indicators and 2 Limit LED indicators

• Mute button for all the Mic channels• FX bypass button and FX Foot Switch to mute FX function• 56 sorts of stereo effects with LED digital display• Insert balanced/unbalanced 1/4” TRS jacks for the built-in stereo amplifi ers

• 5 low level outputs (Main L/R, Mon Send, FX Send, and Sub Out-80Hz LPF with 1/4” TRS jacks,and Record Output with RCA jacks)

• Thermal protect, over current protect, DC protect, and output short protect

• Speakon outputs for speakers

Power Output: 500W x 2 RMS into 4 ohms (THD=1%@ 1KHz)550W x 2 RMS into 4 ohms (THD=5%@ 1KHz)260W x 2 RMS into 8 ohms (THD=1%@ 1KHz)290W x 2 RMS into 8 ohms (THD=5%@ 1KHz)1300W x 2 Peak into 4 ohms700W x 2 Peak into 8 ohmsAC 100-120V~50/60Hz or AC220-240V~50/60HzFrequency Response: 20Hz -40kHz +1dB/-3dB (Mic/Line mono, Line stereo)Input channel equalizations: High 12kHz shelvingMid 2kHz shelvingLow 100Hz shelvingMaximum: +/-15dBProduct Dimension (H x W x D):(MM): 540 x 330 x 330 (Inch): 22" x 13" x 13"Net weight: 11Kg/24lbsCarton Dimension (H x W x D):(MM): 604 x 401 x 403 (Inch): 23.78" x 15.79" x 15.87"Gross Weight: 13.5kg/29.7lbs

Force 12

46

S

The S Series from Wharfedale Pro are high output power amplifi ers designed to cater for a wide range of applications.

Each model is packed into a convenient, 2U rackmount chassis with identical functional layout. Each model offers a different power rating with a variety of input and output options.

Various mode assignments are provided on the rear panel with easy-to-use mode switches that provide assignment options such as signal limiting, low cut fi lter engagement and frequency selection, stereo and mono input mode selection and output bridging.

The S-Series amps are fan-cooled with a cage-protected, rear panel mounted fan that provides adequate air-flow to internal components. An integral AC power circuit breaker is provided on the rear panel and a standard IEC power connector is provided.

S Series Amplifi ers

• Front panel LED indicators for Power, Protect, Bridge, Peak and signal• Global power switch and input trim controls for each of the two channels• Rear panel "mode switches" for signal limiting, low cut fi lter engagement/frequency, stereo/mono input mode selection and output bridging • Industry standard XLR and balanced 1/4" TRS input jacks with 4 pin NL-4 style SpeakonTM outputs and binding post output connectors• Multiple output wiring confi gurations • Fan-cooled with a cage-protected, rear panel mounted fan to provide adequate air-fl ow to internal components• Integral AC power circuit breaker and standard IEC power connector on the rear panel

Stereo mode: 215 Watts per channel into 8 ohms(0.1% THD @ 1kHz) 350 Watts per channel into 4 ohms(0.1% THD @ 1kHz) 462 Watts per channel into 2 ohms(0.1% THD @ 1kHz)Bridged mode: 630 Watts into 8 ohms(0.1% THD @ 1kHz) 910 Watts into 4 ohms(0.1%THD @ 1kHz)AC 100V/120V/220V/240V, 50/60HzFrequency Response: 20Hz-20kHz 0/-0.5dBProduct Dimension(H x W x D):(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"Carton Dimension (H x W x D):(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"Net Weight: 15.40kg/33.88lbsGross Weight: 17.88kg/39.33Ibs

S-1000

Stereo mode: 300 Watts per channel into 8 ohms (0.1% THD @ 1kHz) 480 Watts per channel into 4 ohms (0.1% THD @ 1kHz) 650 Watts per channel into 2 ohms (0.1% THD @ 1kHz)Bridged mode: 910 Watts into 8 ohms (0.1% THD @ 1kHz) 1200 Watts into 4 ohms (0.1% THD @ 1kHz) AC 100V/120V/220V/240V, 50/60HzProduct Dimension (H x W x D):(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"Carton Dimension (H x W x D):(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"Net Weight: 16.30kg/35.86lbsGross Weight: 18.78kg/41.31Ibs

S-1500

Stereo mode: 490 Watts per channel into 8 ohms (0.1% THD @ 1kHz) 760 Watts per channel into 4 ohms (0.1% THD @ 1kHz) 1050 Watts per channel into 2 ohms (0.1% THD @ 1kHz)Bridged mode: 1400 Watts into 8 ohms (0.1% THD @ 1kHz) 2200 Watts into 4 ohms (0.1% THD @ 1kHz)AC 100V/120V/220V/240V, 50/60HzProduct Dimension (H x W x D):(MM): 96 x 482.6 x 427 (inches): 3.80" x 19.00" x 16.80"Carton Dimension (H x W x D):(MM): 175 x 565 x 502 (inches): 6.89" x 22.24" x 19.76"Net Weight: 17.70kg/38.94lbsGross Weight: 20.16kg/44.35Ibs

S-2500

Key Features

Electronics

4

The MP Series amplifiers are heavy duty, high power output power amplifiers suitable for touring and installation applications. Oversize toroidal transformers ensure reliable high power delivery, with a linear power supply for stable operation in the most demanding situations.

Two models are available in the range, featuring Class A/B topology for the MP1800 and Class H for the MP2800. The MP Series was engineered to provide massive output and boasts an impressive list of safety features to protect your investment. A continuously variable fan keeps the unit cool at all times. Both models come in a durable all steel 3U rackmount chassis. Dual mono and bridged mode operation is selectable via back panel switching.

MP Series Amplifi ers

• Sophisticated Protection Circuitry• Front Panel Input Trim Controls• Balanced/Unbalanced ¼" TRS and XLR Inputs• Speakon Ouputs

Stereo 600W @ 4 ohms, 900W @ 2 ohmsUp to 1,800W @ 4 ohms Bridged High-precision Class AB topologyBalanced XLR and 1/4" TRS Inputs Short Circuit, Open Circuit and Thermal protection5-way Binding Post and NL4 output connectors 3U rack mount enclosureAC 100-120V~/220-240V~, 50/60HzProduct Dimension (W x D x H):(MM): 133 x 483 x 355 (inches): 5.20" x 19.00" x 13.90"Carton Dimension (W x D x H):(MM): 250 x 570 x 480 (inches): 9.84" x 22.44" x 18.90"Net Weight: 23.50kg/51.70lbsGross Weight: 25.00kg/55.00Ibs

MP1800

Stereo 950W @ 4 ohms, 1450W @ 2 ohmsUp to 2,700W @ 4 ohms Bridged High-precision Class H topologyBalanced XLR and 1/4" TRS Inputs Short Circuit, Open Circuit and Thermal protection5-way Binding Post and NL4 output connectors 3U rack mount enclosureAC 100-120V~/220-240V~, 50/60HzProduct Dimension (W x D x H):(MM): 133 x 483 x 355 (inches): 5.20" x 19.00" x 13.90"Carton Dimension (W x D x H):(MM): 250 x 570 x 480 (inches): 9.84" x 22.44" x 18.90"Net Weight: 28.00kg/61.60lbsGross Weight: 29.50kg/64.90Ibs

MP2800

Key Features

Electronics

48

DWDW Series Amplifi ersThe DW Series from Wharfedale Pro are rackmount power amplifiers suitable for both touring and fixed installation applications. The rugged class H topology and toroidal transformers are tolerant to unfavourable power conditions, and ensure stable operation in even the most demanding conditions.

Three models are available with different power outputs, each using the same 2U chassis with front panel mounted fi ltered air intakes. LED status indicators make you aware of AC supply, protection circuitry activity, bridge mode and peaks on channel A or B.

XLR inputs with through outputs allow parallel wiring of multiple amplifi ers for use in larger applications. The main outputs use Speakon™ connectors for durable and reliable connectivity. Bridge mode and ground lift switches are located on the rear to minimize the risk of accidental activation.

• Switchable stereo and bridged modes • Individual channel input trim controls• XLR inputs with through outputs • Speakon™ main outputs

• Power, Protect, Bridge and Peak LED indicators• Fan cooled with front panel mounted fi lters • IEC mains input receptacle • 2U rackmount chassis

Stereo mode: 2 x 230 Watts per channel into 8 ohms (0.1% THD @ 1kHz) 2 x 330 Watts per channel into 4 ohms (0.1% THD @ 1kHz) 2 x 340 Watts per channel into 2 ohms (0.1% THD @ 1kHz)Bridged mode: 650 Watts into 8 ohms (0.1% THD @ 1kHz) 800 Watts into 4 ohms (0.1% THD @ 1kHz)AC 100-120V~/220-240V~, 50/60HzFrequency Response: 20Hz-20kHz (0~2dB)Product Dimension (W x D x H):(MM): 483 x 380 x 88 (inches): 19.02" x 14.96" x 3.46"Carton Dimension (W x D x H):(MM): 570 x 555 x 145 (inches): 22.44" x 21.85" x 5.71"Net Weight: 17.50kg/38.50IbsGross Weight: 19.00kg/41.80Ibs

DW 800


DW 1600


DW 2400

Electronics

Key Features

4

WX Series Amplifiers Electronics

• SMPS - Lightweight and Efficient• Class AB Topology amplifier modules - For Great Sound Quality and Reliability

• Internal LPF/HPF/Fullrange Filtering• Speakon Outputs• Internal Circuit Breaker With Reset Switch• Ultra Quiet Variable Speed Fan• XLR Inputs and Parallel Wired Thru Outputs• Front Panel Input Trim Controls• Signal, Peak, Power and Protect LED Indicators• Road Ready 2U Chassis• IEC Mains Input Receptacle

Key Features

The WX Series features that deliver between 300W and 500W per channel into a 4 ohm load in a rugged 2U, 19" rack mount enclosure. An advanced SMPS (Switched Mode Power Supply) and Class AB topology deliver high power with low distortion in a compact and lightweight form factor.

A full suite of protection includes thermal, over and under voltage, over-current, DC, short circuit protect and power on/off mute. The WX Series features XLR inputs and link outputs with a maximum input level of +22dBu allowing integration with any typical professional audio system. A variable speed fan keeps the amplifier rack quiet when not in use. The WX series features a built in switched 100Hz LPF/HPF on each channel, allowing the amplifier to drive a bi-amplified system without any external processing.

50

WX-8Stereo Power Output: 500 Watts, 8 ohms x 2800 Watts, 4 ohms x 2840 Watts, 2 ohms x 21650 Watts(Peak @ 1kHz, single) 4 ohmsAC 110-120V~50/60Hz or AC100V~50/60Hz;AC 220-230V~50/60Hz or AC240V~50/60HzFrequency Response: 20Hz-20kHz +/-1dB @ 4 ohms5Hz-50kHz +/-3dB @ 4 ohmsProduct Dimension (H x W x D):(MM): 481.6 x 401 x 88 (inches): 19.00" x 15.79" x 3.50"Carton Dimension (H x W x D):(MM): 594 x 558 x 180(inches): 23.39" x 22.00" x 7.09"Net Weight: 11.90kg/26.18lbsGross Weight: 15.00kg/33.00lbs

WX-12Stereo Power Output: 700 Watts,8 ohms x 21200 Watts,4 ohms x 21300 Watts,2 ohms x 22450 Watts (Peak @ 1kHz, single) 4 ohmsAC 110-120V~50/60Hz or AC100V~50/60Hz;AC 220-230V~50/60Hz or AC240V~50/60HzFrequency Response: 20Hz-20kHz +/-1dB @ 4 ohms5Hz-50kHz +/-3dB @ 4 ohmsProduct Dimension (H x W x D):(MM): 481.6 x 401 x 88 (inches): 19.00" x 15.79" x 3.50"Carton Dimension (H x W x D):(MM): 594 x 558 x 180(inches): 23.39" x 22.00" x 7.09"Net Weight: 13.50kg/29.70lbsGross Weight: 16.80kg/36.96lbs

WX-1Stereo Power Output: 180 Watts, 8 ohms x 2300 Watts, 4 ohms x 2260 Watts, 2 ohms x 2650 Watts (Peak @ 1kHz, single) 4 ohmsAC 100-120V~50/60Hz or AC220-240V~50/60HzFrequency Response: 20Hz-20kHz +/-1dB @ 4 Ohms5Hz-50kHz +/-3dB @ 4 OhmsProduct Dimension (H x W x D):(MM): 481.6 x 286 x 88 (inches): 19.00" x 11.30" x 3.50"Carton Dimension (H x W x D):(MM): 579 x 409 x 180(inches): 22.79" x16.10" x 7.09"Net Weight: 8.2kg/18.04lbsGross Weight: 9.5kg/20.9lbs

WX-3Stereo Power Output: 260 Watts, 8 ohms x 2500 Watts, 4 ohms x 2330 Watts, 2 ohms x 21050 Watts (Peak @ 1kHz, single) 4 ohmsAC 100-120V~50/60Hz or AC220-240V~50/60HzFrequency Response: 20Hz-20kHz +/-1dB @ 4 ohms5Hz-50kHz +/-3dB @ 4 ohmsProduct Dimension (H x W x D):(MM): 481.6 x 286 x 88 (inches): 19.00" x 11.30" x 3.50"Carton Dimension (H x W x D):(MM): 579 x 409 x 180(inches): 22.79" x 16.10" x 7.09"Net Weight: 8.5kg/18.7lbsGross Weight: 9.5kg/20.9lbs

WX

Full Range

Electronics

51

The Wharfedale Pro XO Series active analogue crossovers facilitate simple creation of bi-amplified or tri-amplified sound systems. The XO series employ analogue circuitry throughout with 24dB / octave Linkwitz Reilly filters. All models have 2 channels with global controls to retain the stereo imaging of the programme material.

Emphasis has been placed on the safety of your rig with a switchable 40Hz 12dB/octave HPF to increase headroom and reduce the risk of driver over excursion. Independent switchable soft limiting on each of the outputs also helps to protect your amp and speakers.

To help fine tune the setup of your system each individual output has a mute switch and phase reverse switch.

The XO series crossovers have independent output level controls ranging from -∞ to +6dB, to assist you there are LED output meters and a simple input clip LED.

All inputs and outputs are available with balanced TRS or XLR connectivity, there is the inclusion of a mono summed LF output for using a mono subwoofer in a stereo application. All units come in a 1U 19” rackmount chassis and accept mains power via an IEC connector.

• Simplified one control setup for both channels• Professional 24dB/oct, Linkwitz Reilly filters• Switchable 40Hz 12dB/oct HPF• Four LED output level meters plus input clip indicator• Independent phase switching of outputs

XO Series Crossovers

• Output mute switches with LED indicator• Individual output level controls range from –∞ dB to +6dB• Mono Sum Subwoofer output• Input gain variable between –∞ and +6dB• 1U, 19” Rack mount chassis

Connectors:1/4" TRSInput Impedance: Balanced 20kW, unbalanced 10kWMax Input Level: +20dBu Output Impedance: Balanced/Unbalanced 100 ohmsMax Output Level: +21dBu Subwoofer Output: 1/4" TRS Product Dimension (W x D x H): (MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"Carton Dimension (W x D x H):(MM): 535 x 282 x 54 (inches): 21.06" x 11.10" x 2.12"Net Weight: 2.92kg/6.42IbsGross Weight: 3.94kg/8.66Ibs

XO-204Connectors:1/4" TRS, Input Impedance: Balanced 20kW, unbalanced 10kWMax Input Level: +20dBu Output Impedance: Balanced/Unbalanced 100 ohmsMax Output Level: +21dBu Subwoofer Output: 1/4" TRS Product Dimension (W x D x H): (MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"Carton Dimension (W x D x H):(MM): 535 x 282 x 54 (inches): 21.06" x 11.10" x 2.12"Net Weight: 2.97kg/6.53IbsGross Weight: 3.99kg/8.77Ibs

XO-206

Connectors: XLR Input Impedance: Balanced 20kW, unbalanced 10kWMax Input Level: +20dBu Output Impedance: Balanced/Unbalanced 100 ohmsMax Output Level: +21dBu Subwoofer Output: XLR (pin 2 hot)Product Dimension (W x D x H): (MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"Carton Dimension (W x D x H):(MM): 518 x 258 x 103 (inches): 20.39" x 10.15" x 4.05"Net Weight: 2.92kg/6.42IbsGross Weight: 3.96kg/8.71Ibs

XO-204XConnectors: XLR Input Impedance: Balanced 20kW, unbalanced 10kWMax Input Level: +20dBu Output Impedance: Balanced/Unbalanced 100 ohmsMax Output Level: +21dBu Subwoofer Output: XLR (pin 2 hot)Product Dimension (W x D x H): (MM): 483 x 173 x 44 (inches): 19.01" x 6.81" x 1.73"Carton Dimension (W x D x H):(MM): 518 x 258 x 103 (inches): 20.39" x 10.15" x 4.05"Net Weight: 2.97kg/6.53IbsGross Weight: 3.99kg/8.77Ibs

XO-206X

Electronics

Key Features

52

LMX-204

The LMX-204 is a precision 2-way, dual channel analogue crossover with audiophile grade components. All inputs and outputs have both balanced/unbalanced ¼” TRS jacks and balanced XLR connectors.

An LMX-204 is a great tool for getting the most from a system and can be used to increase clarity and power while simultaneously protecting the drive units. The LMX-204 has adjustable delay on the low frequency band for accurate phase alignment of subwoofers.

A host of tools are included to make tuning a system as simple as possible. The LMX-204 includes variable input gain and frequency controls, mute and soft limit switching and a sweepable delay time control.

LMX-204 Crossover

• Professional Stereo 2-Way Crossover• Audiophile Components• Precision 24 dB/Octave Linkwitz-Riley Filters• Excellent Phase Response Characteristics• Individual output Gain controls for Each band

Electronics

Key Features• Individual output Mute switches to aid setup• Low Frequency Delay Control for Phase Alignment• Switchable 40Hz High Pass filter to Increase Headroom and prevent driver over excursion

• Precision potentiometers

Connectors: XLR (pin 2 hot) and 1/4" TRS jacksInput Impedance: Balanced 20kW, unbalanced 10kWMax Input Level: +20dBu balanced or unbalancedOutput Impedance: Balanced/Unbalanced 100 ohmsMax Output Level: +21dBu balanced/unbalanced into100-120V~50/60Hz or 220-240V~50/60HzProduct Dimension (H x W x D):(MM): 44 x 482.6 x 173 (inches): 1.73" x 19" x 6.81" Carton Dimension (H x W x D):(MM): 100 x 500 x 255(inches): 3.94" x 19.67" x 10.04"Gross Weight: 3.7kg/8.14lbs

LMX-204

53

Wharfedale Pro have released the WPL-26 line level routing solution. Built using the highest quality components the WPL-26 is suitable for use in a variety of environments from retail shops, recording studios and fi xed installations. The WPL-26 can make speaker comparisons simple and effective.

The WPL-26 has 2 stereo inputs using balanced ¼” TRS connectors with a mute button and left only button for routing a mono signal to the outputs. 6 stereo outputs are available, also using high quality balanced ¼” TRS connectors.

High speed solid state signal switching is used and controlled either from the front panel mounted source and destination buttons or from the supplied Infrared remote control. The infrared remote system has an external receiver with a 6m cable to allow the WPL to be hidden from the line of sight.

• High quality 2 x 6 signal switch • Easy to use front panel controls: o Power On/off o Input channel selector switch (A/B) o Output channel switches (1-6) o Mute button

WPL-26 Speaker Switching System

WPL-26Input Impedance: UNBAL 10kW BAL 20kW, Noise: -75dBu, Power Consumption: 10WAC 100-240V~, 50/60HzProduct Dimension (H x W x D):(mm): 482.6 x 159.15 x 44(inches): 19.00'' x 6.26'' x 1.73''Carton Dimension (H x W x D): (mm): 561 x 266 x 109(inches): 22.08'' x 10.47'' x 4.29''Net Weight: 2.65kg/5.83lbsGross Weight: 3.93kg/8.64lbs

Electronics

Key Features• High speed solid state signal switching • High quality connectors (1/4''/ 6.35mm)• IR Remote control• IR receiver with 6m cable

WPL-26

54

WPR-26

The WPR-26 MKII is a high quality remote controlled loudspeaker switching system that is suitable for loudspeaker and power amplifier comparison in retail and demonstration environments, the WPR-26 MKII helps create a perfect demo environment.

The WPR-26 MKII is a great upgrade to make loudspeaker demonstrations much more professional, 2 dual channel power amplifi ers can be connected as sources and 6 pairs of passive loudspeakers can be connected as destinations. High power handling relays (1000W+) allow you to switch between sets of speakers without having to re-route signal cables.

A front panel display gives visual feedback from the WPR-26 MKII including which input is selected and which destination loudspeakers are active, there is also facility to mute all devices and use the left input channel only. The WPR-26 MKII is designed to allow only one active destination, to avoid overloading the source amplifi er with low impedance loads.

An IR remote control allows a demonstrator or customer to effortlessly switch between amplifi ers and loudspeakers while in an optimal listening position. The IR receiver has a 6m long cable that enables the equipment rack to be kept away from the demonstration area.

• High quality 2 x 6 signal switch • Easy to use front panel controls: o Power On/off o Input channel selector switch (A/B) o Output channel switches (1-6) o Mute button

WPR-26 MKII

Noise: -105dBu, Power Consumption: 10WAC 100-240V~, 50/60HzProduct Dimension (H x W x D):(mm): 482 x 225 x 45(inches): 18.97'' x 8.85'' x 1.77''Carton Dimension (H x W x D): (mm): 611 x 109 x 325(inches): 22.75'' x 22.36'' x 11.25''Net Weight: 3.60kg/5.83lbsGross Weight: 4.55kg/10.01lbs

WPR 26MKII

Key Features• High speed solid state signal switching • High quality connectors• IR Remote control• IR receiver with 6m cable

Electronics

WPR 26 MKII

55

The Q series range of graphic equalisers have been designed from the ground up to provide the most transparent tonal correction and feedback elimination possible, utilising constant Q fi lters to maintain even bandwidth irrespective of gain making even severe adjustments remain transparent.

There are 3 models in the range catering for 1/3 octave and 2/3 octave frequency bandwidths with ISO centre frequencies. Whatever your needs the Q series will assist you in achieving the best possible sound from your live rig or installation.

All models feature switchable 6dB / 12dB fader range and input gain ranging from -infinity dB to +6dB, in addition soft limiting helps to prevent damage to your amp and speakers. A HPF has been included to remove unwanted low end and improve headroom. There is a bypass switch and LED output meter to allow easy A/B comparison and assist correct gain structure.

All models in the range are equipped with XLR / 1/4” TRS balanced / unbalanced connections and have ground lift switches to eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

Q Series Equalisers

• Constant Q fi lters • Switchable 6dB / 12dB fader range • Switchable bypass with LED indicator • Four LED output level meter plus input clip indicator

• Input gain adjustable between -∞ dB and +6dB. • Built in soft limit helps prevent overloads that damage speakers. • XLR/ 1/4” TRS balanced/unbalanced inputs/outputs. • Ground lift switch quickly solves earth loop and external noise issues.

1/4'' TRS, female XLR (pin 2 hot)Balanced 20k ohm, unbalanced 10k ohm,>+21dBu balanced or unbalanced, >40dB, typically >55dB at 1kHz, Impedance-balanced/unbalanced, RF fi ltered, Balanced 100 ohm,Unbalanced 50 ohm, >+21dBu balanced/unbalanced into 2k ohm or greater,20Hz to 20kHz, +0.5/-1dB, <10Hz to >50kHz, +0.5/-3dB, Signal-to-Noise: 90dB, THD + Noise: <0.004%, Product Dimension (W x D x H): (MM): 482.6 x 170 x 88 (inches): 19.00'' x 6.69'' x 3.46''Carton Dimension (W x D x H): (MM): 500 x 260 x 100 (inches): 19.68'' x 10.23'' x 3.93'' Net Weight: 4.00kg/8.80IbsGross Weight: 5.45kg/11.99Ibs

Q-130

1/4'' TRS, female XLR (pin 2 hot)Balanced 20k ohm, unbalanced 10k ohm,>+21dBu balanced or unbalanced, >40dB, typically>55dB at 1kHz, Impedance-balanced/unbalanced, RF fi ltered, Balanced 100 ohm,Unbalanced 50 ohm, >+21dBu balanced/unbalanced into 2k ohm or greater,20Hz to 20kHz, +0.5/-1dB, <10Hz to>50kHz, +0.5/-3dB, Signal-to-Noise: 90dB, THD + Noise: <0.004%, Product Dimension (H x W x D): (MM): 482.6 x 168 x 44 (inches): 19.00'' x 6.61'' x 1.73''Carton Dimension (W x D x H): (MM): 500 x 260 x 56 (inches): 19.68'' x 10.23'' x 2.20''Net Weight: 2.96kg/6.51IbsGross Weight: 3.90kg/8.58Ibs

Q-215

1/4'' TRS, female XLR (pin 2 hot)Balanced 20k ohm, unbalanced 10k ohm,>+21dBu balanced or unbalanced, >40dB, typically>55dB at 1kHz, Impedance-balanced/unbalanced, RF fi ltered, Balanced 100 ohm,Unbalanced 50 ohm, >+21dBu balanced/ unbalanced into 2k ohm or greater,20Hz to 20kHz, +0.5/-1dB, <10Hz to>50kHz, +0.5/-3dB, Signal-to-Noise: 90dB, THD + Noise: <0.004%, Product Dimension (H x W x D): (MM): 482.6 x 168 x 88 (inches): 19.00'' x 6.61'' x 3.46''Carton Dimension (W x D x H): (MM): 500 x 260 x 100 (inches): 19.68'' x 10.23'' x 3.93''Net Weight: 3.93kg/8.64IbsGross Weight: 5.38kg/11.83Ibs

Q-230

Electronics

Key Features

KM Microphones 59Contact Microphones 61DM Microphones 62

MICROPHONESMICROPHONES

5

The KM Series are high quality vocal and instrument microphones from Wharfedale Pro.

KM series microphones are designed to provide exceptionally clear, articulate sound with excellent off-axis rejection for high gain before feedback in a live environment.

The KM Series Microphones are super-cardioid dynamic & cardioid condenser (KM-3) microphones available in a variety of formats. The KM Series features polar response patterns that minimise feedback and help reject signals not originating in front of the microphone.

The microphones have extended frequency response for optimum reproduction. They are designed to provide exceptionally clear and articulate sound. A shock mounting system isolates the microphone element from external forces to greatly reduce handling noise. The well-balanced zinc-alloy die cast body ensures reliable performance in even the most demanding applications. The high sensitivity capsule picks up all of the nuances of a performance. A lightweight neodymium magnet provides 6dB of additional sensitivity/gain compared to other magnetic materials.

Designed for high SPL use, the KM Series Microphones are ideal for mic'ing drums or other percussion instruments, but fi t into a wide range of applications. Using the mounting brackets, you can place the KM-4 & KM-5 mics on drums and other instruments with ease.

KM Series Vocal/Instrument Microphones

Key Features• High tech zinc fi nish • 5 application specifi c models • Unidirectional polar responses • Neodymium magnets (Except KM-3) • Dent-resistant steel grilles • Rugged cast Zinc alloy body • Gold-plated XLR connector

60

KM-1Hand held dynamic super-cardioid microphone

Frequency response 50-18,000Hz,250 ohms, 53 dBV/Pa, >25dB Product Dimension (W x D x H)(MM): Ø45.5 x 178 x Ø23(inches): 1.77'' x 7.01'' x 0.91''Carton Dimension (W x D x H)(MM): 115 x 230 x 70(inches): 4.53'' x 9.06'' x 2.76''Net Weight: 160.00g(5.6oz)Gross Weight: 0.80kg/1.66Ibs

KM-2Hand held dynamic super-cardioid microphone

Frequency response 30-20,000Hz,<1000 ohms, 46 dBV/Pa, >18dB,Product Dimension (W x D x H)(MM): Ø30 x 154 x Ø21(inches): 1.18'' x 6.06'' x 0.83''Carton Dimension (W x D x H)(MM): 115 x 230 x 70(inches): 4.53'' x 9.06'' x 2.76''Net Weight: 120.00g (4.2oz)Gross Weight: 0.60kg/1.39Ibs

KM-3Small diaphragm overhead / instrument condenser mic suitable for cymbals, acoustic guitars, pianos and other stringed instruments

Frequency response 30-12,000Hz,250 ohms, 54 dBV/Pa, >20dB,Product Dimension (W x D x H)(MM): Ø58.6 x 77.8 x Ø27(inches): 2.31''x 3.06'' x 1.06''Carton Dimension (W x D x H)(MM): 115 x 230 x 70(inches):4.53'' x 9.06'' x 2.76''Net Weight: 240.00g (8.5oz)Gross Weight: 0.70kg/1.5Ibs

KM-4Kick / tom mic suitable for live sound reinforcement or studio recording of kick drum, toms, bass guitar and brass instruments.

Frequency response of 50-16,000Hz,250 ohms, 54dBV/Pa, >22dB ,Product Dimension (W x D x H)(MM): Ø45.2 x 61.3 x Ø24(inches): 1.78'' x 2.41'' x 0.94''Carton Dimension (W x D x H)(MM): 115 x 230 x 70(inches): 4.53'' x 9.06'' x 2.76''Net Weight: 170.00g(6.0oz)Gross Weight: 0.70kg/1.47Ibs

KM-5

Snare / tom mic suitable for live sound reinforcement or studio recording of kick drum, toms, bass guitar and brass instruments.

KMD-7

Frequency response 40-16,000Hz,600 ohms, 51 dBV/Pa, >20dBProduct Dimension (W x D x H) (MM): Ø51.5 x 178 xØ 22(inches): 2.03'' x 7.01'' x 0.87''Carton Dimension (W x D x H)(MM): 115 x 230 x 70(inches): 4.53'' x 9.06'' x 2.76''Net Weight: 180g (6.3oz)Gross Weight: 0.775kg/1.66Ibs

A 7 piece drum kit set (KMD-7) is available in a protective moulded case. This set, comprising 2 x KM3 overheads, 1 x KM4 kick/tom mic and 4 x KM5 snare/tom mic's provides a high quality drum mic solution including all mounting hardware.Carton Dimension (W x D x H)(MM): 480 x 405 x 408(inches): 18.9'' x 15.94'' x 16.06''Net Weight: 12.98kg/28.56IbsGross Weight: 15.7kg/34.54Ibs

KM

Electronics

61

The Contact Series from Wharfedale Pro are high performance UHF wireless handheld microphones. 2 models are available in the range, with both single and dual channel options available.

All contact wireless systems feature automatic channel scanning. The receiver can scan through all available channels and select the clearest for interference free reception. An IR link between the transmitter and receiver allows the receiver to synchronize frequency information with the transmitter for one button, hassle free setup.

The 800T features a true diversity transmitter and receiver for seamless performance at distances over 55m. The 502A features a pair of antenna diversity transmitters and receivers in a 19” 1U rackmountable chassis. All models in the Contact Series use PLL synthesis for stable well timed performance.

Contact Handheld Wireless Microphones

• PLL synthesis• IR link for quick setup• Receiver auto scanning

Contact 800T Contact 502A

Frequency Response of 50Hz~18kHz (±3dB)Sensitivity: 2μV(S/N>12dB 25kHz deviation)Maximum Output Level: (MIC): -14dBV/100Ω, (LINE): -4dBV/5kΩProduct Dimension (W x D x H)(MM): 220 ×160 × 44(inches): 8.80'' x 6.40'' x 1.76''Carton Dimension(W x D x H)(MM): 480 x 470 x 400(inches): 18.89'' x 18.50'' x 15.74''Net Weight: 19.6kg/43.12lbsGross Weight: 21.00kg/46.20Ibs

Frequency Response of 60 - 15kHz (±3dB)Sensitivity: 4μV(S/N>12dB 25kHz deviation)Maximum Output Level: -14dBV/5kΩProduct Dimension(W x D x H)(MM): 420 x 195 x 44(inches): 16.54'' x 7.68'' x 1.76''Carton Dimension(W x D x H)(MM): 590 x 430 x 310(inches): 23.22'' x 16.92'' x 12.20''Net weight: 18.4kg/40.84lbsGross Weight: 19.84kg/43.65lbs

Key Features• Long reception range• LCD display on transmitters

62

The New DM is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch(DM-S). Characteristics of the DM-S and DM-X, such as a wide Supercardioid pickup pattern with a frequency response of 50Hz-16kHZ , slight bass proximity and mid range presence result in a warm and natural response for nearly every type of voice. The DM-S and DM-X is engineered to handle very high levels of gain without distortion and will provide over 20dB of off axis feedback rejection.

Low impedance and balanced output allow interference free performance even with long cable runs. The DM-S and DM-X is built solidly with a cast zinc alloy body, steel mesh grille ball and internal pop screen.

DM-X & DM-S Microphones

• Professional performance - affordable price• Tailored to sound excellent on a wide variety of vocals• Built to withstand rigours of life on the road• Available with on/off switch including durable nylon mic cip and carrying • Pouch with zip.

DM-X & DM-SElectronics

Key Features

Frequency response 50Hz-16kHz,600 ohms -52dB(at 1kHz 0dB=1V/Pa),Available in a pack of 3 and single pack,Mic/Connector 3 pin gold plated male XLR Cable/Connector XLR typeProduct Dimension (W x D x H)(MM): Ø53 x 175 x Ø22(inches): 2.09'' x 6.89'' x 0.87''Carton Dimension (W x D x H)(MM): 115 x 230 x 70 (Single Pack)(MM): 280 x 229.2 x 78.5 (Three Pack)Net Weight: 0.695kg/1.53IbsGross Weight: 0.80kg/1.66Ibs (Single Pack)&11.70kg/25.70lbs (Three Pack)

DM-XFrequency response 50Hz-16kHz,600 ohms -52dB(at 1kHz 0dB=1V/Pa)Available in a pack of 3 and single pack,with on/off switchMic/Connector 3 pin gold plated male XLR Cable/Connector XLR typeProduct Dimension (W x D x H)(MM): Ø53 x 175 x Ø22(inches): 2.09'' x 6.89'' x 0.87''Carton Dimension(W x D x H)(MM): 115 x 230 x 70 (Single Pack)(MM): 280 x 229.2 x 78.5 (Three Pack)Net Weight: 0.695kg/1.53IbsGross Weight: 0.80kg/1.66Ibs (Single Pack)&11.70kg/25.70lbs (Three Pack)

DM-S

Value Integrity Performance

IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU, Englandwww.wharfedalepro.com

UK : Tel + 44 (0) 1480 447700 . Fax + 44 (0) 1480 431767 The information in this brochure is subject to change without notice. Errors and omissions excepted.

All rights reserved © 2013 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.

Documents

Wharfedale Pro General Brochure 2013