6
weatherford.com 1 Wireline Services © 2006–2010 Weatherford. All rights reserved. 3734.02 Perforating Cased Hole Tubing-Conveyed Perforating (TCP) Guns Weatherford’s tubing-conveyed perforating (TCP) guns enable operators to optimize well flow by detonating high-performance, deep-penetrating shaped charges that maximize perforation length and entry hole size. TCP guns treat zones with drilling, cement, or perforation damage and also initiate formation breakdown during hydraulic fracturing, with pressure ratings up to 30,000 psi (207 MPa). Adaptable to any application Run on pipe with most completion applications Run with wireline under permanent and/or retrievable packers Applications Low-debris and zero-debris charges are available to fit required application, providing increased flexibility. Gun lengths and assemblies can be customized for each application, enhancing operational efficiency. TCP guns permit operations at substantially higher underbalanced pressure differentials to ensure better perforation clean up. Large- diameter, multiphased casing guns increase perforation depth and diameter, resulting in a perforation with minimum restriction and higher productivity. Because TCP services perforate long intervals in a single trip, substantial rig cost savings are realized. Also maximum perforation cleaning—when perforating underbalanced—can only be achieved by perforating the entire zone at one time. TCP guns enable maximum potential to be obtained from a perforation, decreasing stimulation costs. Because pressure-control equipment can be installed before perforating, kill fluid costs are reduced. TCP assemblies—essentially large casing guns—safely and efficiently protect personnel and equipment. With TCP guns there are no electronically detonated blasting caps in the system, which means no premature or accidental firing because of stray electrical currents. TCP guns also can be run regardless of temperature, H2S, or CO2 levels. Features, Advantages and Benefits

WFT-Tubing Conveyed Perforatinng Guns

  • Upload
    zbhdzp

  • View
    262

  • Download
    2

Embed Size (px)

DESCRIPTION

WFT

Citation preview

  • weatherford.com 1

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Perforating Cased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    Weatherfords tubing-conveyed perforating (TCP) guns enable operators to optimize well flow by detonating high-performance, deep-penetrating shaped charges that maximize perforation length and entry hole size. TCP guns treat zones with drilling, cement, or perforation damage and also initiate formation breakdown during hydraulic fracturing, with pressure ratings up to 30,000 psi

    (207 MPa).

    Adaptable to any application Run on pipe with most completion applications Run with wireline under permanent and/or retrievable packers

    Applications

    Low-debris and zero-debris charges are available to fit required application, providing increased flexibility.

    Gun lengths and assemblies can be customized for each application, enhancing operational efficiency.

    TCP guns permit operations at substantially higher underbalanced pressure differentials to ensure better perforation clean up. Large-diameter, multiphased casing guns increase perforation depth and diameter, resulting in a perforation with minimum restriction and higher productivity.

    Because TCP services perforate long intervals in a single trip, substantial rig cost savings are realized. Also maximum perforation cleaningwhen perforating underbalancedcan only be achieved by perforating the entire zone at one time. TCP guns enable maximum potential to be obtained from a perforation, decreasing stimulation costs. Because pressure-control equipment can be installed before perforating, kill fluid costs are reduced.

    TCP assembliesessentially large casing gunssafely and efficiently protect personnel and equipment. With TCP guns there are no electronically detonated blasting caps in the system, which means no premature or accidental firing because of stray electrical currents. TCP guns also can be run regardless of temperature, H2S, or CO2 levels.

    Features, Advantages and Benefits

  • weatherford.com 2

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Specifications

    PerforatingCased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    Low-shot-density TCP guns*

    Gun Sizes Shot-Density OptionsPhasing Options Temperature Ratings Charge Options

    1-11/16 in. (43 mm)

    1 to 6 shots/ft (3 to 20 shots/m) Multiple

    up to 550F (288C)

    BH, DP, SDP

    2-1/8 in. (54 mm) BH, DP, SDP

    2-3/8 in. (60 mm) BH, SDP

    2 in. (51 mm) BH, DP, SDP

    2 in. (51 mm) BH, DP, SDP

    2-7/8 in. (73 mm) BH, DP

    3-1/8 in. (79 mm) BH, DP, SDP

    3-3/8 in. (86 mm) BH, DP, SDP

    4 in. (102 mm) BH, DP, SDP

    4-5/8 in. (118 mm) BH, DP, SDP

    5 in. (127 mm) 5 shots/ft (17 shots/m) 60 DP

    5-1/8 in. (130 mm) 1 to 6 shots/ft (3 to 20 shots/m) Multiple BH, DP, SDP

    High-shot-density TCP guns*

    Gun Sizes Shot Density OptionsPhasing Options Temperature Ratings Charge Options

    3-1/8 in. (79 mm) 9 to 12 shots/ft (29 to 39 shots/m)

    Multiple up to 550F (288C)

    BH, DP

    3-3/8 in. (86 mm) 9 to 12 shots/ft (29 to 39 shots/m) BH, DP, SDP

    4 in. (102 mm) 9 shots/ft (29 shots/m) BH, DP

    4 in. (102 mm) 9 to 18 shots/ft (9 to 59 shots/m) BH, SBH, DP

    4-5/8 in. (118 mm) 8 to18 shots/ft (26 to 59 shots/m) BH, DP, SDP

    5-1/8 in. (130 mm) 8 to 21 shots/ft (26 to 69 shots/m) BH, DP, SDP, SBH

    7 in. (178 mm) 8 to 18 shots/ft (26 to 59 shots/m) BH, GH, DP, SDP

    * Custom gun sizes are available upon request.

    Low-Shot High-Shot

  • weatherford.com 3

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Gun Performance Summary

    PerforatingCased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    TCP Gun OD (in.)

    Shot Charge

    Type

    Density (SPF) Dry or Fluid Phasing

    Charge Part Number

    Explosive Weight (oz/g)

    Casing OD (in.)

    Entry Hole (in.)

    Penetration (in./cm)

    Penetration Normal at 5,000 psi

    (34.5 MPa)(in./cm)

    Temperature 1 hr (F/C) Data Source

    Pressure (psi/MPa)

    Tensile (lb/kg)

    Loaded Gun Weight In Air (lb/ft, kg/m)

    2-3/4 BH 6D/4D 60 to 90 TAG-2750-401BH 0.51 14.5 4-1/4 0.645.74

    14.586.92

    17.58400 204 API RP-19B

    23,000 158.6

    210,000 95,256

    9.2 13.7

    2-7/8 BH 6F 60 TAG-3125-301 0.53 15.0 4-1/2 0.606.69

    16.996.81

    17.30330 166 RP-43

    22,500 155.1

    210,000 92,256

    10.5 15.6

    3-1/8 BH 12F 135 / 45 HSC-3125-310A 0.39 11.0 5 0.585.18

    13.165.29

    13.44330 166 RP-43

    21,000 144.8

    200,000 90,720

    12.5 18.6

    3-3/8 BH

    6F 60 HSC-3375-401F 0.88 25.0 5-1/2 0.596.83

    17.358.61

    21.87400 204 API RP-19B

    20,000 137.9

    300,000 136,000

    17.0 25.3

    6F/5D/4D 60 to 90 HSC-3375-301 0.71 20.0 5 0.736.05

    15.376.73

    17.09

    330 166 RP-43

    12F 135 / 45

    HSC-3125-310ZF0.39 11.0 5-1/2 0.63

    5.46 13.87

    5.76 14.63 18.0

    26.8HSC-3125-310A 4.87 12.37

    5.19 13.18

    4 BH 5F/4F 60 to 90 HSC-5000-325F 1.20 34.0 5-1/2 0.917.16

    18.197.16

    18.19330 166 RP-43

    19,000 131.0

    350,000 158,750

    19.5 29.0

    4-1/2 BH

    5D/4D60

    HSC-5000-325F 1.13 32.0

    7

    0.83 9.66 24.549.66

    24.54330 166 RP-43

    17,000 117.2

    370,000 167,800

    22.0 32.7

    5F HSC-5000-425F 1.20 34.0 0.878.72

    22.1510.78 27.38

    400 402 API RP-19B

    12F

    135 / 45

    HSC-3375-301 0.71 20.0 0.717.04

    17.887.72

    19.61

    330 166 RP-43

    12F/16F

    TAG-5000-306ZF 0.67 19.0 0.726.96

    17.687.63

    19.38

    TAG-5000-306 0.71 20.0 0.726.32

    16.056.85

    17.40

    16F 135 / 45 TAG-4625-301ZF 0.60 17.0 0.786.57

    16.697.14

    18.14

    4-5/8 BH 18F 140 / 20 TAG-4625-301ZF 0.60 17.0 7 0.856.30

    16.006.83

    17.35330 166 RP-43

    20,000 167.8

    370,000 167,800

    25.0 37.1

    5-1/8 BH 16F/12F 135 / 45

    TAG-5000-306-ZF 0.67 19.07-5/8

    0.71 7.05 17.917.66

    19.46 330 166 RP-43

    17,000 117.2

    350,000 159,000

    40.0 27.0

    TAG-5000-306 0.71 20.0 0.726.87

    17.457.54

    19.15

    7 BH

    12F 135 / 45

    TAG-7000-361F1.38 39.0 9-5/8

    1.05 7.82 19.877.82

    19.87

    330 166 RP-43

    13,000 89.6

    890,000 483,700

    43.5 64.7

    16F 140 / 20 1.13 7.54 19.157.54

    19.15

    18F 140 / 20

    1.08 8.82 22.408.82

    22.40 44.0 65.5

    TAG-7000-362F 1.06 7.43 18.87 8.24

    20.93

    Big Hole

  • weatherford.com 4

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Gun Performance Summary

    PerforatingCased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    TCP Gun OD (in.)

    Shot Charge

    Type

    Density (SPF) Dry or Fluid Phasing

    Charge Part Number

    Explosive Weight (oz/g)

    Casing OD (in.)

    Entry Hole (in.)

    Penetration (in./cm)

    Penetration Normal at 5,000 psi

    (34.5 MPa)(in./cm)

    Temperature 1 hr (F/C)

    Data Source

    Pressure (psi/MPa)

    Tensile (lb/kg)

    Loaded Gun Weight

    In Air (lb/ft, kg/m)

    2-3/4

    SDP

    6D/4D 60 to 90

    SDP-2750-402NT3 0.51 14.5

    4-1/2

    0.29 32.83 83.3937.25 94.62

    400 204 API RP-19B

    23,000 158.6

    210,000 95,256

    9.2 13.7

    SDP-2750-311NT4 0.53 15.0 0.4040.50

    102.87 330 166 RP-43

    GH TAG-2750-302GH 0.51 14.5 0.3815.30 38.86

    15.95 40.51

    2-7/8 SDP 6F 60

    SDP-2875-402NT3 0.55 15.64-1/2

    0.32 27.86 70.7631.59 80.24

    400 204 API RP-19B 22,500

    155.1210,000 95,256

    9.2 13.7

    TAG-3125-302 0.53 15.0 0.3321.88 56.58

    24.34 61.82

    330 166 RP-43

    3-1/8

    SDP

    6F/4D 60 to 90

    SDP-3125-411NT4 0.74 21.0

    4-1/2

    0.37 42.90 108.9743.79 111.23

    400 204

    RP-43

    21,000 144.8

    200,000 90,720

    12.0 17.9

    SDP-3375-311NT 0.76 21.5 0.4235.60 90.42

    36.02 91.59

    330 166

    SDP-3125-411NT4 0.74 21.0 0.3534.24 86.97

    39.50 100.33

    400 204 API RP-19B

    DP

    TAG-3375-311 0.81 23.0 0.5224.90 63.25

    25.12 63.80

    330 166 RP-43

    TAG-3375-311L 0.67 19.0 0.4421.60 54.86

    22.26 56.54

    SDP 12F 135 to 45 SDP-3125-312NT0.32 9.2 5 0.33

    20.56 52.22

    12.5 18.6

    3-3/8

    SDP

    4F/5D/4D

    60 to 90

    SDP-3375-411NT4 0.88 25.0

    4-1/2

    0.42

    48.47 123.11

    50.85 129.16

    400 204

    RP-43

    20,000 137.9

    300,000 136,000

    17.0 25.3

    42.34 107.54

    49.92 126.80 API RP-19B

    6D SDP-3125-411NT4 0.74 21.0 0.3739.33 99.90

    43.60 110.74

    RP-43

    4D/6F SDP-3375-311NT 0.76 21.5 0.4337.30 94.74

    38.03 95.60

    330 166

    6F/5D/4D SDP-3375-411NT3 0.88 25.0 0.4237.21 94.51

    44.16 112.17

    400 204

    API RP-19B6D SDP-3125-311NT4 0.74 21.0 0.3736.8

    93.47

    330 1666F/4D

    SDP-3375-311NT 0.76 21.5 0.4333.84 85.95

    37.24 94.59

    GH TAG-3375-311 0.81 23.0 0.5228.20 71.63

    28.61 72.67

    RP-43

    DP TAG-3375-311L 0.67 19.0 0.4522.57 57.33

    23.57 59.87

    GH 6F/5D/4D TAG-3375-302 0.88 25.0 0.5518.16 46.13

    23.47 59.61 API RP-19B

    Super-Deep Penetrator, Good Hole, and Deep Penetrator

  • weatherford.com 5

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Gun Performance Summary

    PerforatingCased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    TCP Gun OD (in.)

    Shot Charge

    Type

    Density (SPF) Dry or Fluid Phasing

    Charge Part Number

    Explosive Weight (oz/g)

    Casing OD (in.)

    Entry Hole (in.)

    Penetration (in./cm)

    Penetration Normal at 5,000 psi

    (34.5 MPa)(in./cm)

    Temperature 1 hr (F/C)

    Data Source

    Pressure (psi/MPa)

    Tensile (lb/kg)

    Loaded Gun Weight in Air (lb/ft, kg/m)

    4

    SDP

    4F

    60 to 90 SDP-4500-411NT31.38 39.0

    5-1/2

    0.41 59.53 151.2162.80

    159.51

    400 204

    RP-43

    19,000 131.0

    350,000 158,750

    4SPF 19.5 29.0

    6SPF 20.8 31.0

    60 SDF-4500-411NT3 0.43 49.16 124.8755.24

    140.31 API RP-19B

    6D/4D 60 to 90 SDP-3125-411NT4 0.74 21.0 0.3943.30

    109.9844.32 112.57

    RP-43

    DP/GH 4F 60 TAG-4500-311 1.38 39.0 0.5840.18

    102.0642.39

    107.67

    330 166

    SDP

    6D/4D

    60 to 90

    SDP-3375-311NT 0.76 21.5 0.4838.40 97.54

    39.22 99.62

    GH TAG-3375-311 0.81 23.0 0.5126.00 66.04

    26.49 67.28

    DP TAG-3375-311L 0.67 19.0 0.4421.32 54.15

    21.79 55.35

    BH 5F/4F HSC-5000-325F 1.20 34.0 0.917.16

    18.197.16

    18.19

    SDP 6D/4D SDP-3375-411NT4 0.88 25.0 400 204

    4-1/2

    SDP

    5F

    60

    SDP-4500-411NT3 1.38 39.0

    7

    0.40

    62.73 159.33

    66.18 168.10

    400 204

    RP-43

    17,000 117.2

    370,000 167,800

    22.0 32.7

    54.20 137.67

    64.24 163.17 API RP-19B

    6D/4D

    SDP-3125-411NT4 0.74 21.00.37

    43.00 109.22

    44.48 112.98

    RP-43

    SDP-3375-311NT 0.76 21.533.30 84.58

    34.18 86.82

    330 166

    12F 135 to 45

    SDP-3125-411NT4 0.74 21.0 0.3432.86 83.46

    37.20 94.49

    400 204

    API RP-19B

    SDP-3375-311NT 0.76 21.5 0.3629.06 73.81

    35.00 88.90

    330 166

    GH

    6D/4D 60

    TAG-3375-311 0.81 23.0

    0.51 27.50 69.8528.07 71.30

    RP-43

    12F 135 to 45 0.4922.20 56.39

    22.58 57.35

    DP

    6D/4D 60

    TAG-3375-311L 0.67 19.0

    0.42 20.68 52.5321.37 54.28

    12F 135 to 45 0.4120.19 51.28

    20.52 52.13

    SDP

    F45D 60 SDP-3375-411NT4 0.88 25.0 400 204

    12F 135 to 45 SDP-3125-411NT40.74 21.0

    Super-Deep Penetrator, Good Hole, and Deep Penetrator

  • weatherford.com 6Weatherford products and services are subject to the Companys standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.

    Wireline Services

    20062010 Weatherford. All rights reserved. 3734.02

    Gun Performance Summary

    PerforatingCased Hole

    Tubing-Conveyed Perforating (TCP) Guns

    Gun OD (in.)

    Shot Charge

    Type

    Density (SPF) Dry or Fluid Phasing

    Charge Part Number

    Explosive weight (oz/g)

    Casing OD (in.)

    Entry Hole (in.)

    Penetration (in./cm)

    Penetration Normal at 5,000 psi

    (34.5 MPa)(in./cm)

    Temperature 1 hr (F/C) Data Source

    Pressure (psi/MPa)

    Tensile (lb/kg)

    Loaded Gun

    Weight In Air

    (lb/ft, kg/m)

    5-1/8

    SDP

    5F/4D 60 SDP-4500-411NT3 1.38 39.0

    7

    0.42 62.73 159.3366.94

    170.03 400 204

    RP-43 17,000 117.2350,000 159,000

    27.0 40.0

    12F 135 to 45

    SDP-3125-411NT4 0.74 21.0 0.3743.13

    109.5543.66 110.90

    SDP-3375-311NT 0.76 21.5 0.4540.07

    101.7840.56

    103.02

    330 166

    GH TAG-3375-311 0.81 23.0 0.4925.72 65.33

    26.04 66.14

    DP TAG-3375-311L 0.67 19.0 0.4619.03 48.34

    19.26 48.92

    SDP 6D/4D 60 SDP-3375-411NT4 0.88 25.0 400 204

    7

    SDP

    12F 135 to 45

    SDP-4500-411NT31.38 39.0

    9-5/8

    0.39

    64.75 164.47

    68.30 173.48 400

    204

    RP-43

    13,000 896

    890,000 403,700

    43.5 64.7

    51.53 130.89

    57.80 146.81 API RP-19B

    DP

    TAG-4500-311 0.53 43.21 109.7545.60 115.82 330

    166 RP-43

    TAG-5000-313 1.27 36.0 0.4628.49 72.36

    30.40 77.22

    Super-Deep Penetrator, Good Hole, and Deep Penetrator