www.CLEARblast.com FP Group LLC: 706 Old Westtown Road, Ste. E • West Chester, PA 19382 • Toll Free: 1-888-327-7698 • Phone: 610-431-1672 Specs Dimensions 48”L x 26”W x 48”H 350 lbs. Dry \ 673lbs. Wet 100-400cfm (Hose & Nozzle Size Dependent on Air Supply) 50 Ft. Blast Hose Standard, Up to 200Ft. with Extension Hoses 100lbs (1+ hrs. Run Time) Weight Air Capacity Pot Media Capacity Hose Length **Specifications subject to change without notice. General WHAT IS WET ABRASIVE BLASTING? Wet abrasive blasting works by mixing water and abrasive first, then using compressed air to propel the slurry against the surface. Unlike dry blasting, wet abrasive blasting substantially reduces media consumption up to 75% and eliminates dust by over 90% while still providing any profile and surface cleanliness required. SIMPLY THE BEST IN WET ABRASIVE BLASTING With state of the art pneumatic controls, setup is simpler and faster than ever, even for the most novice users! We’re talking start to blasting in 5 minutes or less! With blast pressures that range from 30 to 120psi, the CLEARblast 150 can tackle a large variety of jobs from soft fiberglass to tough coatings on steel. Its compact and mobile, yet, has a 1HR runtime! All that and more make the CLEARblast 150 simply the BEST! Wet Abrasive Blaster 5 Minute Setup | 1HR Runtime | Safe for the User Less Containment | No Chemicals | No Electric The most advanced, versatile, and user-friendly system on the market today • Simple Pneumatic Controls • Digital Hour Meter • Online Training Videos • Powder Coated Steel Frame • Fork Pockets for Lifting • Storage Lid & Water Hose • On-Board Water Tank • Run Flat Tires/Locking Casters • Centralized Hose Connections

Wet Abrasive Blaster - d163axztg8am2h.cloudfront.netd163axztg8am2h.cloudfront.net/static/doc/f3/92/48eb903e248d... · Wet abrasive blasting works by mixing water and abrasive first,

Download PDF Report

Upload
buithuan
View
227
Download
5

Embed Size (px)

Citation preview

Page 1: Wet Abrasive Blaster - d163axztg8am2h.cloudfront.netd163axztg8am2h.cloudfront.net/static/doc/f3/92/48eb903e248d... · Wet abrasive blasting works by mixing water and abrasive first,

www.CLEARblast.com

FP Group LLC: 706 Old Westtown Road, Ste. E • West Chester, PA 19382 • Toll Free: 1-888-327-7698 • Phone: 610-431-1672

Specs

Dimensions 48”L x 26”W x 48”H

350 lbs. Dry \ 673lbs. Wet

100-400cfm (Hose & Nozzle Size Dependent on Air Supply)

50 Ft. Blast Hose Standard, Up to 200Ft. with Extension Hoses

100lbs (1+ hrs. Run Time)

Weight

Air Capacity

Pot Media Capacity

Hose Length

**Specifications subject to change without notice.

General

WHAT IS WET ABRASIVE BLASTING?Wet abrasive blasting works by mixing water and abrasive first, then using compressed air to propel the slurry against the surface. Unlike dry blasting, wet abrasive blasting substantially reduces media consumption up to

75% and eliminates dust by over 90% while still providing any profile and surface cleanliness required.

SIMPLY THE BEST IN WET ABRASIVE BLASTING With state of the art pneumatic controls, setup is simpler and faster than ever, even for the most novice

users! We’re talking start to blasting in 5 minutes or less! With blast pressures that range from 30 to 120psi, the CLEARblast 150 can tackle a large variety of jobs from soft fiberglass to tough coatings on steel. Its

compact and mobile, yet, has a 1HR runtime! All that and more make the CLEARblast 150 simply the BEST!

Wet Abrasive Blaster

5 Minute Setup | 1HR Runtime | Safe for the User

Less Containment | No Chemicals | No Electric

The most advanced, versatile, and user-friendly system on the market today

• Simple Pneumatic Controls• Digital Hour Meter• Online Training Videos• Powder Coated Steel Frame• Fork Pockets for Lifting

• Storage Lid & Water Hose• On-Board Water Tank• Run Flat Tires/Locking Casters• Centralized Hose Connections