-
Wellhead and XmassTree
WWW.TMOT.CA
-
2
CORPORATE OVERVIEW
REGIONS
ADVANTAGES
TMOTlocations are specific to pressure products
TMOT
TMOT Petroleum Products
Pressure Products Group
Canada (Calgary)
United Arab Emirates (Dubaï)
Automated welding
In-house testing facilities
Parts-specific warehouse
For aftermarket support
TMOT Product Line
Wellhead & X-mas Tree
Chokes & Valves
Featured equipment
Product range
Table Of Contents
Manufacturing / Facilities
-
3
AFTERMARKET SUPPORT
WELLHEAD & WELL TEST
PRESSURE PRODUCTS OFFERINGS
FLOW CONTROL
From system designs to technical support, our pressure products
group offers a wide variety ofsolutions
RepairRemanufactureCertificationField ServicesParts
ValvesActuatorsChokesX-mas TreesWelltest ManifoldsFlowheads
ManifoldsSSVs
ValvesChokesManifolds
Product Line Summary
-
4
WELLHEAD OPTIONSContinuous control line(s)¼’’
Metal Extended Neck Hangersealings
top and bottom
Casing metal seal for annulussevere
corrosive service
Hydraulic surface safety valve master
& wing
Wellhead X-Mas Trees
-
5
WELLHEAD X-MAS TREEUnderground Coal burnersEuropean test wells
(3)Wellhead + X-mastree5,000 PSI WPWith manifoldsAll cladded
inconel 625Service : °660FMaterial Class : HH
-
6
WELLHEAD X-MAS TREEHigh abrasive and velocity TC trim
Adjustable or positive type(same bodies)
Interchangeability of beans & seats
Flanged or studded bodies
Manufactured Choke
ADJUSTABLE CAGE CHOKEStep by Step motorisedchoke
IN LINE CHOKE
-
7
L.P.O HLS PILOTS
GATE VALVESManufactured Gate Valve
TYPE G: 7-1/16’’ 3K x bore 6-3/8’’ ALL CONDITIONS
BLOCK TYPE(09’’ 3,000 PSI WP)
-
8
AFTER SALESSupplying spare parts
Maintenance & service on wells
Repair / Rebuilt in the eventof damaging incidents
Supervision
Work over operation
After Sales Services
-
9
WELLHEAD & X-MAS TREE CROSS TYPE
WELLHEAD & X-MAS TREE SOLID BLOCK TYPE
Temperature Class L to X (-46°C to +180°C)PSL level ‘2 to 3G /
4’3 000 to 15 000 PSI WPMaterial class from AA (sweet service) to
HH(highly corrosive service cladded material)
Temperature Class L to X (-46°C to +180°C)PSL level ‘2 to 3G /
4’3 000 to 15 000 PSI WPMaterial class from AA (sweet service)
toHH(highly corrosive service cladded material)
Featured Equipment
-
10
POSITIVE CHOKE
IN-LINE CHOKE
ADJUSTABLE CHOKE
CHOKEAdjustable, Positive or In-Line (Tip orCage)
Size: 2.1/16 to 7.1/16”
2 000 to 20 000 PSI WP
Temperature Class L to U (-46°C to +121°C)
Material class DD to HH-NL
PSL2 to PSL3G
-
11
GATE VALVEThough conduit, full boreMetal to metal seatingSize:
2.1/16 to 7.1/16”2 000 to 20 000 PSI WPTemperature Class L to U
(-46°C to +121°C)Material class DD to HH-NLPSL2 to PSL3G
-
12
LIFT CHECK VALVESpring loaded to ensure its service in each
position.
Size: 2.1/16 to 4.1/16”
2 000 to 20 000 PSI WP
Temperature Class L to U (-46°C to +121°C)
Material class DD to HH-NL
PSL2 to PSL3G
-
13
WELL TEST EQUIPMENTTemperature Class L to X (-46°C to +180°C)PSL
Level 2 to 3G3,000 to 20,000 PSI WPMaterial Class AA to HH
-
14
DRILLING and SERVICE TOOL EQUIPMENT
BOP TEST PLUGRUN / RETRIEVE WEAR BUSHING
LUBRICATOR TOOLFOR RUNNING / RETRIEVING BPV
AND TWCV TYPE « H »VALVE REMOVAL TOOLTO RUN / RETRIEVE V.R.
PLUG
-
15
GAS TEST PSL 3G
-60°C TEMP TEST
WATER POOLGAS TESTS PSL 3G
LOW TEMPERATURE TESTCRYOGENIC TESTS FOR « PACK-ING » AND « SEALS
»PERFORMANCES
Special Tests
-
16
PACKAGINGIn progress seaworthy packaging SEI A IV
ADAPTERMASTER VALVE
TUBING HEAD SECTION
-
17
PRODUCT RANGE
Gate Valves Lift Check Valves ChokesSize : 2.1/16” to
7.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to HH-NLQuality
level : PSL2 to PSL3GTemperature : L to UPR2 + Appendix F
ApprovedAvailable in Handwheel,Hydraulic andPneumatic
configuration
type “G” valve offers bidirection-nal sealing in high and
lowpressure, for gas or oil, with the dual seat seal. PR2
certified, the type “G” valve wi l l f i tperfectly your manifold
andproduction applications, in the m o s t s e v e r e c o r r o s
i o nconditions.
Features :Tungsten carbide facingsDual seat seal for high/low
pressure sealForged body constructionSolid one piece seats and
gate
Size : 2.1/16” to 4.1/16”Pressure : 2K to 15K PSI WPMaterial :
DD to HH-NLQuality level : PSL2 to PSL3GTemperature : L to U
L i f t check va lve has beendevelopped to suit the production a
p p l i c a t i o n s i n s e v e r e corrosion conditions. The
lift check is spring loaded to ensure i t s ser v ice in each
position.
Features:Forged body constructionSpring loaded checkCobalt Alloy
seat
Adjustable/Positive Choke Stem/Tip Size :2.1/16” to
7.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to HH-NLQuality
level : PSL2 to PSL3GTemperature : L to UPR2 Tested
P1/P2 adjustable / positive c h o ke s a r e d e s i g n e d fo
r w e l l t e s t a n d p r o d u c t i o n applications.Massive
stem prevents the tip to break.
Features :Massive stem, HVOF Tungsten Carbide (TC) on tipLong
life bean with massive TC insertEasy opening for quick bean
change
-
18
Chokes Chokes FittingsAdjustable/Positive Choke Cage/PistonSize
: 2.1/16” to 7.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to
HH-NLQuality level : PSL2 to PSL3GTemperature : L to UPR2
Tested
Cage chokes are required when a high regulation precision
isrequi red. The cage/Pis tonregulat ion provide a l
inearCv/Opening compare to stem/tip regulation. Best for
actuatedchokes.
Features :Massive tungsten carbide cageLong life bean with
massive TC insertLong life piston with HVOF TC.
Inline Choke Cage/PistonSize : 2.1/16” to 7.1/16”Pressure : 2K
to 15K PSI WPMaterial : DD to HH-NLQuality level : PSL2 to
PSL3GTemperature : L to UPR2 Tested
Inline Choke is a special choke that provides a cage/piston
regulation without making theflowline too turbulent thanks to its
shape.
Features :Straight Way FlowlineMassive tungsten carbide cageLong
life bean with massive TC insertLong life piston with HVOF
TC.Regular Gate valves Face-to-face dimensions on request.
Cross / Flanges / Hammer UnionsSize : 2.1/16” to 4.1/16”Pressure
: 2K to 15K PSI WPMaterial : DD to HH-NLQuality level : PSL2 to
PSL3GTemperature : L to U
-
19
WellHead WellHead X Mas TreeSpools / Casing Heads / Cas-ing
HeadSpools / Tubing Head SpoolsSize : 26.3/4” to 7”Pressure : 2K to
15K PSI WPMaterial : DD to HH-NLQuality level : PSL2 to
PSL3GTemperature : L to U
Onshore wellheads can justify years of service in lowtemperature
and severe sour applications. From the classicalwellhead+X’Mas tree
to solid block configuration, it can suit all kinds of
configuration.
Features :All casing & tubing metal/metal seals availableAll
range of PSL and Material classes.
Adapter / Adapter Master ValveSize : 11” to 7” x 2.1/16” to
4.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to HH-NLQuality
level : PSL2 to PSL3GTemperature : L to U
Onshore wellheads can justify y e a r s o f s e r v i c e i n l
o wtemperature and severe sour applications. From the
classicalwellhead+X’Mas tree to solid block configuration, it can
suit all kinds of configuration.
Features :All casing and tubing metal/metal seals availableAll
range of PSL and Material classes.
Classic X’Mas Tree / Solid Block X’MasTreeSize : 2.1/16” to
7.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to HH-NLQuality
level : PSL2 to PSL3GTemperature : L to U
Onshore wellheads can justify y e a r s o f s e r v i c e i n l
o wtemperature and severe sour applications. From the
classicalwellhead+X’Mas tree to solid block configuration, it can
suit all kinds of configuration.
Features :All casing and tubing metal/metal seals availableAll
range of PSL and Material classes.
-
20
FlowHead
Actuators
Maniflolds HangersFlowHead +Swivel+Handling SubsSize : 2.1/16”
to 4.1/16”Pressure : 2K to 15K PSI WPMaterial : DD to HH-NLQuality
level : PSL2 to PSL3GTemperature : L to U
Pneumatic – self reverse actingHydraulic – double acting – self
reverse actingSize : 8” & 17”Pilot Pressure : 270 Psi
Choke Floor ManifoldsSize : 2.1/16” to 4.1/16”Pressure : 2K to
15K PSI WPMaterial : DD to HH-NLQuality level : PSL2 to
PSL3GTemperature : L to UOptionnal DNV 2-7-3 certified
Choke Floor Manifolds are designed to provide the best welltest
experience with low/high pressure tight valves,accurate and
heavy-duty c h o ke s .
Features :Complete tool boxBean set at your convenienceAll
configurations can be engineered
H a n g e r s p r o v i d e s e a s y installation and
integration
Features :Available in Emergency or manual typeContinuous
control lines are available on massive Inconel Tubing Hangers
Casing Hangers Emergency/MandrelTubing HangersSize : 26.3/4” to
2.7/8” (tubing)Pressure : 2K to 15K PSI WPMaterial : DD to
HH-NLQuality level : PSL2 to PSL3GTemperature : L to U
-
www.tmot.ca [email protected]
Calgary Office:Bay5, 2115 27 Ave, NE Calgary, AB, Canada T3E
7E4Tel: +1 403 713 1062 Fax: +1 403 713 1069
Edmonton Office:2020, 10060 jasper Ave, Edmonton, AB, Canada T5J
3R8Tel: +1 780 640 1056 Fax: +1 780 640 1057
TE
CH
MA
ST
ER
TE
CH
MA
ST
ER
