Upload
others
View
52
Download
1
Embed Size (px)
Citation preview
EXPRESSWELD®
Welding Machines
Stick Electrode Welding Machines
GTA (TIG) Welding Machines
GMA (MIG/MAG) Welding Machines
Plasma Cutting Machines
Stick Electrode Welding Machines
GTA (TIG) Welding Machines
GMA (MIG/MAG) Welding Machines
Plasma Cutting Machines
Registered Trademark
2
Index
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
Welding Machines - Plasma Cutting Machines - Welding Helmet - Welding Spray
MMA Welding Machines Welding Current Page
Expressweld Inverter 140E 135A (Inverter Technology) 268
Expressweld Inverter 151-Ultra PFC 150 A (Inverter and PFC Technology) 270
Expressweld Inverter 160E 155 A (Inverter Technology) 272
Expressweld Inverter 161-Ultra 160 A (Inverter Technology) 274
Expressweld Inverter 175-Ultra PFC 170 A (Inverter and PFC Technology) 276
Expressweld Inverter 200E 180 A (Inverter Technology) 278
Expressweld Inverter 201-Ultra PFC 200 A (Inverter and PFC Technology) 280
Expressweld Inverter 251-Ultra 250 A (Inverter Technology) 282
Expressweld Inverter 255-Ultra 250 A (Inverter Technology) 284
Expressweld Inverter 405-Ultra 400 A (Inverter Technology) 286
GTA (TIG) Welding Machines Welding Current Page
Expressweld Inverter 201-TIG PFC 250 A (Inverter and PFC Technology) 288
GMA (MIG/MAG) Welding Machines Welding Current Page
Expressweld MasterMIG 250CT 250 A (Compact) 290
Expressweld MasterMIG 350 350 A (Power Source and Separable Wire Feeder) 292
Expressweld MasterMIG 420W 420 A (Power Source and Separable Wire Feeder) 294
Expressweld MasterMIG 501W 500 A (Power Source and Separable Wire Feeder) 296
Plasma Cutting Machines Cutting Thickness Page
Expressweld Inverter Plasma 60-Ultra 20 mm (Inverter Technology) 298
3
Registered Trademark
2
Index
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.
Welding Machines - Plasma Cutting Machines - Welding Helmet - Welding Spray
MMA Welding Machines Welding Current Page
Expressweld Inverter 140E 135A (Inverter Technology) 268
Expressweld Inverter 151-Ultra PFC 150 A (Inverter and PFC Technology) 270
Expressweld Inverter 160E 155 A (Inverter Technology) 272
Expressweld Inverter 161-Ultra 160 A (Inverter Technology) 274
Expressweld Inverter 175-Ultra PFC 170 A (Inverter and PFC Technology) 276
Expressweld Inverter 200E 180 A (Inverter Technology) 278
Expressweld Inverter 201-Ultra PFC 200 A (Inverter and PFC Technology) 280
Expressweld Inverter 251-Ultra 250 A (Inverter Technology) 282
Expressweld Inverter 255-Ultra 250 A (Inverter Technology) 284
Expressweld Inverter 405-Ultra 400 A (Inverter Technology) 286
GTA (TIG) Welding Machines Welding Current Page
Expressweld Inverter 201-TIG PFC 250 A (Inverter and PFC Technology) 288
GMA (MIG/MAG) Welding Machines Welding Current Page
Expressweld MasterMIG 250CT 250 A (Compact) 290
Expressweld MasterMIG 350 350 A (Power Source and Separable Wire Feeder) 292
Expressweld MasterMIG 420W 420 A (Power Source and Separable Wire Feeder) 294
Expressweld MasterMIG 501W 500 A (Power Source and Separable Wire Feeder) 296
Plasma Cutting Machines Cutting Thickness Page
Expressweld Inverter Plasma 60-Ultra 20 mm (Inverter Technology) 298
3
ExpressweldExpressweld
MMA Welding Machine
Inverter 140E
Digital Inverter Technology - Current Range: 30-140 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 140 A.
Inverter technology makes the machine portable and lightweight (only 5.8 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
4
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-140 A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Negative (–) output terminal
7 - Power cable
8 - On/Off switch
1
2
3
4
5
6
7
8
EXPRESSWELD Inverter 140E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 6.0 kVA (20%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 20.0 A
Power factor (cos j) 0.65 (20%)
Rated output current, 140 A ; 25.6 V (20%)voltage and duty cycle 75 A ; 23.0 V (60%)
Open circuit voltage 68 V (DC)
Current range 30 - 140 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 5.8 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
5268
ExpressweldExpressweld
MMA Welding Machine
Inverter 140E
Digital Inverter Technology - Current Range: 30-140 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 140 A.
Inverter technology makes the machine portable and lightweight (only 5.8 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
4
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-140 A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Negative (–) output terminal
7 - Power cable
8 - On/Off switch
1
2
3
4
5
6
7
8
EXPRESSWELD Inverter 140E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 6.0 kVA (20%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 20.0 A
Power factor (cos j) 0.65 (20%)
Rated output current, 140 A ; 25.6 V (20%)voltage and duty cycle 75 A ; 23.0 V (60%)
Open circuit voltage 68 V (DC)
Current range 30 - 140 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 5.8 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
5269
ExpressweldExpressweld
MMA Welding Machine
Inverter 151-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 10-140 A
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 140 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 6.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
6
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 10-140 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 151-ULTRA PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 4.6 kW (25%)
Input current (max.) 21.0 A (25%)
Effective current (max.) 11.0 A
Power factor (cos j) 0.99 (25%)
Rated output current, 140 A ; 25.6 V (25%)voltage and duty cycle 90 A ; 23.6 V (60%)
70 A ; 22.8 V (100%)
Open circuit voltage 50 V (DC)
Current range 10 - 140 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 135 x 245 x 370 mm
Compliance EN 60974-1 ; EN 60974-10CE
7270
ExpressweldExpressweld
MMA Welding Machine
Inverter 151-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 10-140 A
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 140 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 6.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
6
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 10-140 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 151-ULTRA PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 4.6 kW (25%)
Input current (max.) 21.0 A (25%)
Effective current (max.) 11.0 A
Power factor (cos j) 0.99 (25%)
Rated output current, 140 A ; 25.6 V (25%)voltage and duty cycle 90 A ; 23.6 V (60%)
70 A ; 22.8 V (100%)
Open circuit voltage 50 V (DC)
Current range 10 - 140 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 135 x 245 x 370 mm
Compliance EN 60974-1 ; EN 60974-10CE
7271
ExpressweldExpressweld
MMA Welding Machine
Inverter 160E
Digital Inverter Technology - Current Range: 30-160 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 160 A.
Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
8
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Welding mode (MMA/Lift-TIG)selection switch
7 - Negative (–) output terminal
8 - Power cable
9 - On/Off switch
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
4
5
6
7
8
9
EXPRESSWELD Inverter 160E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 6.8 kVA (25%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 20.0 A
Power factor (cos j) 0.69 (25%)
Rated output current, 160 A ; 26.4 V (25%)voltage and duty cycle 110 A ; 24.4 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 68 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
9272
ExpressweldExpressweld
MMA Welding Machine
Inverter 160E
Digital Inverter Technology - Current Range: 30-160 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 160 A.
Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
8
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Welding mode (MMA/Lift-TIG)selection switch
7 - Negative (–) output terminal
8 - Power cable
9 - On/Off switch
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
4
5
6
7
8
9
EXPRESSWELD Inverter 160E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 6.8 kVA (25%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 20.0 A
Power factor (cos j) 0.69 (25%)
Rated output current, 160 A ; 26.4 V (25%)voltage and duty cycle 110 A ; 24.4 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 68 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
9273
ExpressweldExpressweld
MMA Welding Machine
Inverter 161-Ultra
Digital Inverter Technology - Current Range: 30-160 A
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 7.3 kg.
Fan cooling.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Two years warranty on parts and labor.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
10
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 161-ULTRA
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 5.2 kW (25%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 16.0 A
Power factor (cos j) 0.72 (25%)
Rated output current, 155 A ; 26.2 V (25%)voltage and duty cycle 100 A ; 24.0 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 60 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 7.3 kg
Dimensions (WxHxD) 135 x 260 x 365 mm
11274
ExpressweldExpressweld
MMA Welding Machine
Inverter 161-Ultra
Digital Inverter Technology - Current Range: 30-160 A
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 7.3 kg.
Fan cooling.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Two years warranty on parts and labor.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 3.2 mm220V - 1Ph
10
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 161-ULTRA
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 5.2 kW (25%)
Input current (max.) 32.0 A (25%)
Effective current (max.) 16.0 A
Power factor (cos j) 0.72 (25%)
Rated output current, 155 A ; 26.2 V (25%)voltage and duty cycle 100 A ; 24.0 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 60 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 7.3 kg
Dimensions (WxHxD) 135 x 260 x 365 mm
11275
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 9.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 175-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 30-160 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
220V - 1Ph
1Phase2.5 - 3.2 mm
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter and PFC Technology - Current Range: 30-160 A
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 175-Ultra PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 5.0 kW (20%)
Input current (max.) 23 A (20%)
Effective current (max.) 12 A
Power factor (cos j) 0.99 (20%)
Rated output current, 155 A ; 26.2 V (20%)voltage and duty cycle 90 A ; 23.6 V (60%)
70 A ; 22.8 V (100%)
Open circuit voltage 70 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 9.5 kg
Dimensions (WxHxD) 135 x 245 x 450
Compliance EN 60974-1 ; EN 60974-10CE
276
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 9.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 175-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 30-160 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
220V - 1Ph
1Phase2.5 - 3.2 mm
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter and PFC Technology - Current Range: 30-160 A
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 175-Ultra PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 5.0 kW (20%)
Input current (max.) 23 A (20%)
Effective current (max.) 12 A
Power factor (cos j) 0.99 (20%)
Rated output current, 155 A ; 26.2 V (20%)voltage and duty cycle 90 A ; 23.6 V (60%)
70 A ; 22.8 V (100%)
Open circuit voltage 70 V (DC)
Current range 30 - 160 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 9.5 kg
Dimensions (WxHxD) 135 x 245 x 450
Compliance EN 60974-1 ; EN 60974-10CE
277
ExpressweldExpressweld
MMA Welding Machine
Inverter 200E
Digital Inverter Technology - Current Range: 30-180 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 4.0 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 180 A.
Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 4.0 mm220V - 1Ph
14
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-180 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Welding mode (MMA/Lift-TIG)selection switch
7 - Negative (–) output terminal
8 - Power cable
9 - On/Off switch
1
2
3
4
5
6
7
8
9
EXPRESSWELD Inverter 200E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 8.36 kVA (16%)
Input current (max.) 27.2 A (16%)
23.8 A (60%)
Power factor (cos j) 0.70 (16%)
Rated output current, 180 A ; 27.2 V (16%)voltage and duty cycle 95 A ; 23.8 V (60%)
Open circuit voltage 68 V (DC)
Current range 30 - 180 A
Fuse size and type 16 A (delayed)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
15278
ExpressweldExpressweld
MMA Welding Machine
Inverter 200E
Digital Inverter Technology - Current Range: 30-180 A
Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.
Excellent welding performance with rutile and basic coated electrodes between 2.5 - 4.0 mm diameters.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 180 A.
Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.
Equipped with thermal and low voltage protection which improves the reliability.
Easy-to-use and user-friendly control panel.
Fan cooling system.
Recessed controls and connections designed to protect front and rear panels from damage.
Easy welding cable connections with European type quick connectors.
IP21S protection class against water, solid objects and access to hazardous parts by finger.
Two years limited spare parts warranty.
FEATURES and ADVANTAGES
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
1Phase2.5 - 4.0 mm220V - 1Ph
14
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-180 A
TECHNICAL PROPERTIES
1 - Handle
2 - Power indicator light
3 - Thermal protection indicator light
4 - Positive (+) output terminal
5 - Welding current control knob
6 - Welding mode (MMA/Lift-TIG)selection switch
7 - Negative (–) output terminal
8 - Power cable
9 - On/Off switch
1
2
3
4
5
6
7
8
9
EXPRESSWELD Inverter 200E
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 8.36 kVA (16%)
Input current (max.) 27.2 A (16%)
23.8 A (60%)
Power factor (cos j) 0.70 (16%)
Rated output current, 180 A ; 27.2 V (16%)voltage and duty cycle 95 A ; 23.8 V (60%)
Open circuit voltage 68 V (DC)
Current range 30 - 180 A
Fuse size and type 16 A (delayed)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 6.5 kg
Dimensions (WxHxD) 150 x 290 x 380 mm
15279
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 9.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 201-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 10-200 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
2.5 - 4.0 mm220V - 1Ph
1Phase
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter and PFC Technology - Current Range: 10-200 A
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 201-Ultra PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 7.3 kW (20%)
Input current (max.) 33 A (20%)
Effective current (max.) 15 A
Power factor (cos j) 0.99 (20%)
Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle 115 A ; 24.6 V (60%)
89 A ; 23.6 V (100%)
Open circuit voltage 50 V (DC)
Current range 10 - 200 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 9.5 kg
Dimensions (WxHxD) 135 x 245 x 450 mm
Compliance EN 60974-1 ; EN 60974-10CE
280
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 9.5 kg.
Fan cooling.
Environment-friendly.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 201-Ultra PFC
Digital Inverter and PFC Technology - Current Range: 10-200 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
2.5 - 4.0 mm220V - 1Ph
1Phase
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter and PFC Technology - Current Range: 10-200 A
1 - Handle
2 - Power indicator light
3 - Negative (–) output terminal
4 - Thermal protection indicator light
5 - Welding current control knob
6 - Positive (+) output terminal
7 - On/Off switch
8 - Power cable
1
2
3
5
6
7
8
4
EXPRESSWELD Inverter 201-Ultra PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 7.3 kW (20%)
Input current (max.) 33 A (20%)
Effective current (max.) 15 A
Power factor (cos j) 0.99 (20%)
Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle 115 A ; 24.6 V (60%)
89 A ; 23.6 V (100%)
Open circuit voltage 50 V (DC)
Current range 10 - 200 A
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 9.5 kg
Dimensions (WxHxD) 135 x 245 x 450 mm
Compliance EN 60974-1 ; EN 60974-10CE
281
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
Digital Inverter Technology - Current Range: 10-250 A
Digital inverter technology.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
380V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode.
Arc-Force to prevent freezing the electrode in the welding puddle.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 21.5 kg.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Two years warranty on parts and labor.
Inverter 251-Ultra
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
2.5 - 4.0 mm380V - 3Ph
3Phase
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 10-250 A
TECHNICAL PROPERTIES
1 - Power indicator light
2 - Welding current control knob
3 - Digital ampermeter
4 - Negative (–) output terminal
5 - Positive (+) output terminal
6 - Hot-Start
7 - Arc-Force
8 - Thermal protection indicator light
9 - On/Off switch
10 - Power cable
3
9
4
1
2
5
6
7
8
10
EXPRESSWELD Inverter 251-Ultra
Input voltage 380 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 13.0 kVA (35%)
Input current (max.) 20.0 A (35%)
Effective current (max.) 12.0 A
Rated output current, 250 A ; 30.0 V (35%)voltage and duty cycle 190 A ; 27.6 V (60%)
150 A ; 26.0 V (100%)
Open circuit voltage 80 V (DC)
Current range 10 - 250 A
Fuse size and type 3 x 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 21.5 kg
Dimensions (WxHxD) 240 x 440 x 500 mm
282
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
Digital Inverter Technology - Current Range: 10-250 A
Digital inverter technology.
Excellent arc characteristics and outstanding performance for rutil and basic electrode types.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
380V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode.
Arc-Force to prevent freezing the electrode in the welding puddle.
Suitable for operation on site or within a workshop environment by providing maximum flexibility.
Weighing only 21.5 kg.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
IP21S protection class.
Two years warranty on parts and labor.
Inverter 251-Ultra
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
2.5 - 4.0 mm380V - 3Ph
3Phase
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 10-250 A
TECHNICAL PROPERTIES
1 - Power indicator light
2 - Welding current control knob
3 - Digital ampermeter
4 - Negative (–) output terminal
5 - Positive (+) output terminal
6 - Hot-Start
7 - Arc-Force
8 - Thermal protection indicator light
9 - On/Off switch
10 - Power cable
3
9
4
1
2
5
6
7
8
10
EXPRESSWELD Inverter 251-Ultra
Input voltage 380 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 13.0 kVA (35%)
Input current (max.) 20.0 A (35%)
Effective current (max.) 12.0 A
Rated output current, 250 A ; 30.0 V (35%)voltage and duty cycle 190 A ; 27.6 V (60%)
150 A ; 26.0 V (100%)
Open circuit voltage 80 V (DC)
Current range 10 - 250 A
Fuse size and type 3 x 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 21.5 kg
Dimensions (WxHxD) 240 x 440 x 500 mm
283
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
Digital Inverter Technology - Current Range: 30-250 A
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.
Provides 20-50% energy saving compared to conventional machines.
Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.
380-400V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).
Arc-Force to prevent sticking of the electrode to the weld pool.
Generator compatible.*
Suitable to use with long cables with the aid of voltage protection function.
Designed to operate in heavy environmental conditions by providing maximum flexibility.
Weighing only 10.2 kg.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
User-friendly control panel, recessed controls and connections designed to help protect controls from damage.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 255-Ultra
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
3Phase
(*)
2.5 - 5.0 mm380V - 400V3Ph
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-250 A
TECHNICAL PROPERTIES
1 - Handle
2 - Digital ampermeter
3 - Hot-Start
4 - Arc-Force
5 - Negative (–) output terminal
6 - Positive (+) output terminalt
7 - Welding current control knob
8 - Thermal protection indicator light
9 - Power indicator light
3
4
5
1
2
7
8
9
6
EXPRESSWELD Inverter 255-Ultra
Input voltage 380-400 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 9.5 kVA (30%)
Input current (max.) 14.5 A (30%)
Effective current (max.) 8 A
Power factor (cos j) 0.96 (30%)
Rated output current, 250 A ; 30.0 V (30%)voltage and duty cycle 180 A ; 27.2 V (60%)
150 A ; 26.0 V (100%)
Open circuit voltage 47 V (DC)
Current range 30 - 250 A
Fuse size and type 3 x 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 10.2 kg
Dimensions (WxHxD) 165 x 280 x 440 mm
Compliance EN 60974-1 ; EN 60974-10 CE
284
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
Digital Inverter Technology - Current Range: 30-250 A
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.
Provides 20-50% energy saving compared to conventional machines.
Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.
380-400V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).
Arc-Force to prevent sticking of the electrode to the weld pool.
Generator compatible.*
Suitable to use with long cables with the aid of voltage protection function.
Designed to operate in heavy environmental conditions by providing maximum flexibility.
Weighing only 10.2 kg.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
User-friendly control panel, recessed controls and connections designed to help protect controls from damage.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 255-Ultra
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
3Phase
(*)
2.5 - 5.0 mm380V - 400V3Ph
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
MMA Welding MachineDigital Inverter Technology - Current Range: 30-250 A
TECHNICAL PROPERTIES
1 - Handle
2 - Digital ampermeter
3 - Hot-Start
4 - Arc-Force
5 - Negative (–) output terminal
6 - Positive (+) output terminalt
7 - Welding current control knob
8 - Thermal protection indicator light
9 - Power indicator light
3
4
5
1
2
7
8
9
6
EXPRESSWELD Inverter 255-Ultra
Input voltage 380-400 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 9.5 kVA (30%)
Input current (max.) 14.5 A (30%)
Effective current (max.) 8 A
Power factor (cos j) 0.96 (30%)
Rated output current, 250 A ; 30.0 V (30%)voltage and duty cycle 180 A ; 27.2 V (60%)
150 A ; 26.0 V (100%)
Open circuit voltage 47 V (DC)
Current range 30 - 250 A
Fuse size and type 3 x 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 10.2 kg
Dimensions (WxHxD) 165 x 280 x 440 mm
Compliance EN 60974-1 ; EN 60974-10 CE
285
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.
Provides 20-50% energy saving compared to conventional machines
Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.
380-400V-3Ph input voltage and maximum output current of 400 A provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).
Arc-Force to prevent sticking of the electrode to the weld pool.
Generator compatible.*
Suitable to use with long cables with the aid of voltage protection function Designed to operate in heavy environmental conditions by providing maximum flexibility.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
User-friendly control panel, recessed controls and connections designed to help protect controls from damage.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 405-Ultra
Digital Inverter Technology - Current Range: 30-400 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
(*)
2.5 - 5.0 mm380V - 400V3Ph
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter Technology - Current Range: 30-400 A
3
9
4
1
2
5
6
7
8
10
EXPRESSWELD Inverter 405-Ultra
Input voltage 380-400 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 18.0 kVA (45%)
Input current (max.) 26.0 A (45%)
Effective current (max.) 15.4 A
0.96 (35%)
Rated output current, 400 A ; 36.0 V (45%)voltage and duty cycle 305 A ; 32.2 V (60%)
240 A ; 29.6 V (100%)
Open circuit voltage 50 V (DC)
Current range 30 - 400 A
Fuse size and type 3 x 32 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 20.5 kg
Dimensions (WxHxD) 240 x 440 x 540 mm
Compliance EN 60974-1 ; EN 60974-10 CE
1 - Power indicator light
2 - Welding current control knob
3 - Digital ampermeter
4 - Negative (–) output terminal
5 - Positive (+) output terminal
6 - Hot-Start
7 - Arc-Force
8 - Thermal protection indicator light
9 - On/Off switch
10 - Power cable
286
ExpressweldExpressweld
MMA Welding Machine
FEATURES and ADVANTAGES
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.
Provides 20-50% energy saving compared to conventional machines
Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.
380-400V-3Ph input voltage and maximum output current of 400 A provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.
Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).
Arc-Force to prevent sticking of the electrode to the weld pool.
Generator compatible.*
Suitable to use with long cables with the aid of voltage protection function Designed to operate in heavy environmental conditions by providing maximum flexibility.
Digital ampermeter.
Fan cooling.
Thermostatic overload protection and indicator light.
User-friendly control panel, recessed controls and connections designed to help protect controls from damage.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 405-Ultra
Digital Inverter Technology - Current Range: 30-400 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
(*)
2.5 - 5.0 mm380V - 400V3Ph
MMA Welding Machine
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Digital Inverter Technology - Current Range: 30-400 A
3
9
4
1
2
5
6
7
8
10
EXPRESSWELD Inverter 405-Ultra
Input voltage 380-400 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 18.0 kVA (45%)
Input current (max.) 26.0 A (45%)
Effective current (max.) 15.4 A
0.96 (35%)
Rated output current, 400 A ; 36.0 V (45%)voltage and duty cycle 305 A ; 32.2 V (60%)
240 A ; 29.6 V (100%)
Open circuit voltage 50 V (DC)
Current range 30 - 400 A
Fuse size and type 3 x 32 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 20.5 kg
Dimensions (WxHxD) 240 x 440 x 540 mm
Compliance EN 60974-1 ; EN 60974-10 CE
1 - Power indicator light
2 - Welding current control knob
3 - Digital ampermeter
4 - Negative (–) output terminal
5 - Positive (+) output terminal
6 - Hot-Start
7 - Arc-Force
8 - Thermal protection indicator light
9 - On/Off switch
10 - Power cable
287
ExpressweldExpressweldFEATURES and ADVANTAGES
(GTA) TIG Welding Machine
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Premium arc characteristics, outstanding arc stability and performance both in TIG and MMA welding applications with rutile and basic coated electrode types.
Excellent high frequency TIG ignition helps to a perfect arc start.
220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Suitable for maintenance-repair and steel installation workshops and medium-size welded construction applications by providing maximum flexibility.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Weighing only 12.5 kg.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
Fan cooling.
Environment-friendly.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 201-TIG PFC
Digital Inverter and PFC Technology - Current Range: 7-200 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
220V - 1Ph
1Phase2.5 - 4.0 mm
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
(GTA) TIG Welding MachineDigital Inverter and PFC Technology - Current Range: 7-200 A
1
3
4
6
5
9
7
10
8
112
1 - Handle
2 - Thermal protection indicator light
3 - Power indicator light
4 - Welding current control knob
5 - Gas hose connector
6 - Negative (–) output terminal
7 - Positive (+) output terminal
8 - TIG torch connection socket
9 - Arc Force (MMA)Down-Slop (TIG)
10 - Welding mode (TIG/MMA)selection switch
11 - HF-TIG and Lift-TIG selection switch
EXPRESSWELD Inverter 201-TIG PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 7.0 kW (20%)
Input current (max.) 31 A (20%)
Effective current (max.) 14 A
Power factor (cos j) 0.99 (20%)
Rated output current, 200 A ; 18.0 V (20%)voltage and duty cycle (TIG) 115 A ; 14.6 V (60%)
80 A ; 13.2 V (100%)
Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle (MMA) 115 A ; 24.6 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 72 V (DC)
Current range 7 - 200 A (TIG)
10 - 200 A (MMA)
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 12.5 kg
Dimensions (WxHxD) 155 x 275 x 480 mm
Compliance EN 60974-1 ; EN 60974-10CE
288
ExpressweldExpressweldFEATURES and ADVANTAGES
(GTA) TIG Welding Machine
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.
Digital inverter technology.
Premium arc characteristics, outstanding arc stability and performance both in TIG and MMA welding applications with rutile and basic coated electrode types.
Excellent high frequency TIG ignition helps to a perfect arc start.
220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.
Suitable for maintenance-repair and steel installation workshops and medium-size welded construction applications by providing maximum flexibility.
Ideal for welding of carbon and low-alloy steels, even stainless steels.
Weighing only 12.5 kg.
Thermostatic overload protection and indicator light.
Easy-to-use and user-friendly control panel.
Recessed controls and connections designed to help protect controls from damage.
Two quarter-turn (positive and negative) output terminals for easy cable connection.
Fan cooling.
Environment-friendly.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty on parts and labor.
Inverter 201-TIG PFC
Digital Inverter and PFC Technology - Current Range: 7-200 A
Welding Procedure
Manual Metal Arc Welding
Warranty and Properties
2 Years Warranty
220V - 1Ph
1Phase2.5 - 4.0 mm
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
(GTA) TIG Welding MachineDigital Inverter and PFC Technology - Current Range: 7-200 A
1
3
4
6
5
9
7
10
8
112
1 - Handle
2 - Thermal protection indicator light
3 - Power indicator light
4 - Welding current control knob
5 - Gas hose connector
6 - Negative (–) output terminal
7 - Positive (+) output terminal
8 - TIG torch connection socket
9 - Arc Force (MMA)Down-Slop (TIG)
10 - Welding mode (TIG/MMA)selection switch
11 - HF-TIG and Lift-TIG selection switch
EXPRESSWELD Inverter 201-TIG PFC
Input voltage 220 V ; 1~Ph ; 50/60 Hz
Power input @ rated output 7.0 kW (20%)
Input current (max.) 31 A (20%)
Effective current (max.) 14 A
Power factor (cos j) 0.99 (20%)
Rated output current, 200 A ; 18.0 V (20%)voltage and duty cycle (TIG) 115 A ; 14.6 V (60%)
80 A ; 13.2 V (100%)
Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle (MMA) 115 A ; 24.6 V (60%)
80 A ; 23.2 V (100%)
Open circuit voltage 72 V (DC)
Current range 7 - 200 A (TIG)
10 - 200 A (MMA)
Fuse size and type 16 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 12.5 kg
Dimensions (WxHxD) 155 x 275 x 480 mm
Compliance EN 60974-1 ; EN 60974-10CE
289
ExpressweldExpressweldFEATURES and ADVANTAGES
GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled
MasterMIG 250C is a compact type semiautomatic GMA (MIG/MAG) welding machine equipped with a large drive roll system.
Especially suitable for spot welding applications and high quality welding of thin materials and light to medium-sized lowcarbon steels and stainless steels widelyused in metal manufacturing industry.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
20 steps (2x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
Equipped with thermal overload protection circuit.
Weighing only 100 kg.
Gas cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
MasterMIG 250CT
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
250A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled
1 - Wire feed speed control switch
2 - Thermal protection indicator
3 - Torch connection (Euro socket)
4 - Front wheels (mobile)
5 - Rear wheels (fixed)
6 - Work cable connection
7 - Welding voltage switch (course setting)
8 - Welding voltage switch (fine setting)
9 - On/Off switch
10 - Handle
11 - Power indicator
11
5
6
7
8
10
91
2
3
4
POWER SUPPLY MasterMIG 250CT
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 9.0 kW (35%)
Input current (max) 15.2 A (35%)
7,3 A (100%)
Effective current (max.) 9.3 A
Power factor (cos j) 0.93 (min)
Efficiency 73% (min)
0,96 (35%)
Rated output current, 250 A ; 26.5 V (35%)voltage and duty cycle 148 A ; 21.4 V (100%)
Open circuit voltage range 15 - 36 V
Current range 20 - 250 A
Fuse size and type 3 x 20 A (retarded)
Voltage range 15 - 26.5 V
Number of steps (voltage) 20 (2x10)
Protection class IP21S
Weight 100 kg
Dimensions (WxHxD) 490 x 765 x 905 mm
Compliance EN 60974-1 ; EN 60974-10CE
WIRE FEEDER Compact
Wire feed speed range (vn) 1 - 20 m/min
Wire size Solid wire -V- 0.8 - 1.0 mm
Compliance EN 60974-5 ; EN 60974-10CE
290
ExpressweldExpressweldFEATURES and ADVANTAGES
GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled
MasterMIG 250C is a compact type semiautomatic GMA (MIG/MAG) welding machine equipped with a large drive roll system.
Especially suitable for spot welding applications and high quality welding of thin materials and light to medium-sized lowcarbon steels and stainless steels widelyused in metal manufacturing industry.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
20 steps (2x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
Equipped with thermal overload protection circuit.
Weighing only 100 kg.
Gas cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
MasterMIG 250CT
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
250A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled
1 - Wire feed speed control switch
2 - Thermal protection indicator
3 - Torch connection (Euro socket)
4 - Front wheels (mobile)
5 - Rear wheels (fixed)
6 - Work cable connection
7 - Welding voltage switch (course setting)
8 - Welding voltage switch (fine setting)
9 - On/Off switch
10 - Handle
11 - Power indicator
11
5
6
7
8
10
91
2
3
4
POWER SUPPLY MasterMIG 250CT
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 9.0 kW (35%)
Input current (max) 15.2 A (35%)
7,3 A (100%)
Effective current (max.) 9.3 A
Power factor (cos j) 0.93 (min)
Efficiency 73% (min)
0,96 (35%)
Rated output current, 250 A ; 26.5 V (35%)voltage and duty cycle 148 A ; 21.4 V (100%)
Open circuit voltage range 15 - 36 V
Current range 20 - 250 A
Fuse size and type 3 x 20 A (retarded)
Voltage range 15 - 26.5 V
Number of steps (voltage) 20 (2x10)
Protection class IP21S
Weight 100 kg
Dimensions (WxHxD) 490 x 765 x 905 mm
Compliance EN 60974-1 ; EN 60974-10CE
WIRE FEEDER Compact
Wire feed speed range (vn) 1 - 20 m/min
Wire size Solid wire -V- 0.8 - 1.0 mm
Compliance EN 60974-5 ; EN 60974-10CE
291
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 350 is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels, stainless steels, aluminum and their alloys.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Gas cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted not included)
GMA Welding MachineSeparable Wire Feeder - Current Range: 60-360 A - Gas Cooled
MasterMIG 350
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
60%350A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 60-360 A - Gas Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Welding voltage digital display
5 - Welding current digital display
6 - Work cable connection with low induction
7 - Work cable connection with high induction
8 - Welding voltage switch (course setting)
9 - Welding voltage switch (fine setting)
10 - Thermal protection indicator
11 - On/Off switch
12 - Power indicator
13 - Wire feed speed control
14 - Cold wire inch
15 - 2/4 torch mode switch (2/4 stroke)
8
9
10
11
12
13
14
15
1
2
3
5
4
6 7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 350
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 15.1 kVA (60%)
Input current (max.) 23.0 A (60%)
Effective current (max.) 17.8 A
Power factor (cos j) 0.95 (60%)
Efficiency 75%
Rated output current, 350 A ; 31.5 V (60%)voltage and duty cycle 270 A ; 27.5 V (100%)
Open circuit voltage range 19 - 40 V
Current range 60 - 360 A
Voltage range 17 - 32 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class F+H
Weight (without wire feeder) 136 kg
Dimensions (WxHxD) 570 x 835 x 960 mm
Compliance EN 60974-1 ; EN 60974-10CE
WIRE FEEDER MF-3
Wire feed speed range (vn) 1 - 24 m/dak
Soft-arc start speed range % 10 - 100 (vn)
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (WxHxD) 290 x 440 x 675 mm
Compliance EN 60974-5 ; EN 60974-10CE
292
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 350 is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels, stainless steels, aluminum and their alloys.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Gas cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted not included)
GMA Welding MachineSeparable Wire Feeder - Current Range: 60-360 A - Gas Cooled
MasterMIG 350
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
60%350A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 60-360 A - Gas Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Welding voltage digital display
5 - Welding current digital display
6 - Work cable connection with low induction
7 - Work cable connection with high induction
8 - Welding voltage switch (course setting)
9 - Welding voltage switch (fine setting)
10 - Thermal protection indicator
11 - On/Off switch
12 - Power indicator
13 - Wire feed speed control
14 - Cold wire inch
15 - 2/4 torch mode switch (2/4 stroke)
8
9
10
11
12
13
14
15
1
2
3
5
4
6 7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 350
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 15.1 kVA (60%)
Input current (max.) 23.0 A (60%)
Effective current (max.) 17.8 A
Power factor (cos j) 0.95 (60%)
Efficiency 75%
Rated output current, 350 A ; 31.5 V (60%)voltage and duty cycle 270 A ; 27.5 V (100%)
Open circuit voltage range 19 - 40 V
Current range 60 - 360 A
Voltage range 17 - 32 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class F+H
Weight (without wire feeder) 136 kg
Dimensions (WxHxD) 570 x 835 x 960 mm
Compliance EN 60974-1 ; EN 60974-10CE
WIRE FEEDER MF-3
Wire feed speed range (vn) 1 - 24 m/dak
Soft-arc start speed range % 10 - 100 (vn)
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (WxHxD) 290 x 440 x 675 mm
Compliance EN 60974-5 ; EN 60974-10CE
293
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 420W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels and stainless steels.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Water cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
GMA Welding MachineSeparable Wire Feeder - Current Range: 60-420 A - Water Cooled
MasterMIG 420W
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase420A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 60-420 A - Water Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Welding voltage digital display
5 - Welding current digital display
6 - Welding voltage switch (course setting)
7 - Work cable connection with low induction
8 - Work cable connection with high induction
9 - Welding voltage switch (fine setting)
10 - Cooling water indicator
11 - On/Off switch
12 - Power indicator
13 - Thermal protection indicator
14 - Cooling water inlet and outlet sockets
15 - Wire feed speed control
16 - Cold wire inch
17 - 2/4 torch mode switch (2/4 stroke)
8
9
10
11
12
13
14
15
16
17
1
2
3
5
4
6
7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 420W
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 21.0 kVA (25%)
Input current (max.) 32.0 A (25%)
14.0 A (100%)
Effective current (max.) 18.0 A
Power factor (cos j) 0.96 (25%)
Efficiency 73%
Rated output current, 420 A ; 35.0 V (30%)voltage and duty cycle 255 A ; 26.8 V (100%)
Open circuit voltage range 18.1 - 46 V
Current range 60 - 420 A
Voltage range 17 - 35 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class H
Fuse size and type 3 x 40 A (retarded)
Weight (without wire feeder) 154 kg (cooling unit emty)
160 kg (cooling unit full)
Dimensions (WxHxD) 600 x 810 x 1030 mm
Compliance IEC 60974-1 ; EC 60974-10CE
WIRE FEEDER MF-4
Wire feed speed range (vn) 1 - 24 m/dak
Soft-arc start speed range % 10 - 100 (vn)
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (W x H x D) 290 x 440 x 675 mm
Compliance EN 60974-5 ; EN 60974-10CE
294
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 420W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels and stainless steels.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Water cooled.
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
GMA Welding MachineSeparable Wire Feeder - Current Range: 60-420 A - Water Cooled
MasterMIG 420W
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase420A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 60-420 A - Water Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Welding voltage digital display
5 - Welding current digital display
6 - Welding voltage switch (course setting)
7 - Work cable connection with low induction
8 - Work cable connection with high induction
9 - Welding voltage switch (fine setting)
10 - Cooling water indicator
11 - On/Off switch
12 - Power indicator
13 - Thermal protection indicator
14 - Cooling water inlet and outlet sockets
15 - Wire feed speed control
16 - Cold wire inch
17 - 2/4 torch mode switch (2/4 stroke)
8
9
10
11
12
13
14
15
16
17
1
2
3
5
4
6
7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 420W
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 21.0 kVA (25%)
Input current (max.) 32.0 A (25%)
14.0 A (100%)
Effective current (max.) 18.0 A
Power factor (cos j) 0.96 (25%)
Efficiency 73%
Rated output current, 420 A ; 35.0 V (30%)voltage and duty cycle 255 A ; 26.8 V (100%)
Open circuit voltage range 18.1 - 46 V
Current range 60 - 420 A
Voltage range 17 - 35 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class H
Fuse size and type 3 x 40 A (retarded)
Weight (without wire feeder) 154 kg (cooling unit emty)
160 kg (cooling unit full)
Dimensions (WxHxD) 600 x 810 x 1030 mm
Compliance IEC 60974-1 ; EC 60974-10CE
WIRE FEEDER MF-4
Wire feed speed range (vn) 1 - 24 m/dak
Soft-arc start speed range % 10 - 100 (vn)
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (W x H x D) 290 x 440 x 675 mm
Compliance EN 60974-5 ; EN 60974-10CE
295
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 501W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels and stainless steels.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Water cooled (optionally gas cooled).
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
GMA Welding MachineSeparable Wire Feeder - Current Range: 110-500 A - Water Cooled
MasterMIG 501W
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
60%500A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 110-500 A - Water Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Cooling water inlet and outlet sockets
5 - Welding voltage digital display
6 - Welding current digital display
7 - Work cable connection with low-level induction
8 - Work cable connection with mid-level induction
9 - Work cable connection with high-level induction
10 - Welding voltage switch (course setting)
11 - Welding voltage switch (fine setting)
12 - Thermal protection indicator
13 - On/Off switch
14 - Power indicator
15 - Cooling water pump power switch
16 - Wire feed speed control
17 - Cold wire inch
18 - 2/4 torch mode switch (2/4 stroke)
8 9
10
11
12
13
14
15
16
17
171
2
3
5
4
6
7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 501W
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 28.3 kVA (60%)
Input current (max.) 43.0 A (60%)
Effective current (max.) 33.0 A
Power factor (cos j) 0.94 (60%)
Efficiency 73.3%
Rated output current, 500 A ; 39.0 V (60%)voltage and duty cycle 387 A ; 33.4 V (100%)
Open circuit voltage range 20 - 51 V
Current range 110 - 500 A
Voltage range 19.5 - 39 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class F+H
Fuse size and type 3 x 40 A (retarded)
Weight (without wire feeder) 220 kg (cooling unit emty)
225 kg (cooling unit full)
Dimensions (WxHxD) 620 x 900 x 930 mm
Compliance IEC 60974-1 ; IEC 60974-10CE
WIRE FEEDER MF-3
Wire feed speed range (vn) 1 - 24 m/min
Soft-arc start speed range % 10 - 100 (v )
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 - 1.6 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (W x H x D) 290 x 440 x 675 mm
Compliance IEC 60974-5 ; IEC 60974-10CE
296
ExpressweldExpressweldFEATURES and ADVANTAGES
MasterMIG 501W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.
Suitable for high quality welding of constructional low-carbon steels and stainless steels.
Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.
30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.
Adjustable wire feed speed.
2/4 trigger mode selection option.
Wire feed slow run (soft-arc) control function enables easier arc generation.
Equipped with thermal overload protection circuit.
Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.
Equipped with two digital meters to indicate welding current and welding voltage.
Water cooled (optionally gas cooled).
Easy to use, highly reliable.
IP21S protection class.
Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.
Two years warranty. (welding torch and cables excepted)
GMA Welding MachineSeparable Wire Feeder - Current Range: 110-500 A - Water Cooled
MasterMIG 501W
Welding Procedure
Gas Metal Arc Welding
Warranty and Properties
2 Years Warranty
3Phase
60%500A
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Separable Wire Feeder - Current Range: 110-500 A - Water Cooled
GMA Welding Machine
1 - Welding wire cartridge
2 - Gas test (gas purge)
3 - Torch connection (Euro socket)
4 - Cooling water inlet and outlet sockets
5 - Welding voltage digital display
6 - Welding current digital display
7 - Work cable connection with low-level induction
8 - Work cable connection with mid-level induction
9 - Work cable connection with high-level induction
10 - Welding voltage switch (course setting)
11 - Welding voltage switch (fine setting)
12 - Thermal protection indicator
13 - On/Off switch
14 - Power indicator
15 - Cooling water pump power switch
16 - Wire feed speed control
17 - Cold wire inch
18 - 2/4 torch mode switch (2/4 stroke)
8 9
10
11
12
13
14
15
16
17
171
2
3
5
4
6
7
(*) it requires to use teflon spiral and “U” groove drive rolls
POWER SUPPLY MasterMIG 501W
Input voltage 380 V ; 3~Ph ; 50 Hz
Power input @ rated output 28.3 kVA (60%)
Input current (max.) 43.0 A (60%)
Effective current (max.) 33.0 A
Power factor (cos j) 0.94 (60%)
Efficiency 73.3%
Rated output current, 500 A ; 39.0 V (60%)voltage and duty cycle 387 A ; 33.4 V (100%)
Open circuit voltage range 20 - 51 V
Current range 110 - 500 A
Voltage range 19.5 - 39 V
Number of steps (voltage) 30 (3x10)
Protection class IP21S
Insulation class F+H
Fuse size and type 3 x 40 A (retarded)
Weight (without wire feeder) 220 kg (cooling unit emty)
225 kg (cooling unit full)
Dimensions (WxHxD) 620 x 900 x 930 mm
Compliance IEC 60974-1 ; IEC 60974-10CE
WIRE FEEDER MF-3
Wire feed speed range (vn) 1 - 24 m/min
Soft-arc start speed range % 10 - 100 (v )
Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm
Flux-cored wire -V knurled- 1.2 - 1.6 mm
Aluminium wire -U- (*) 1.2 mm
Input voltage and power input 42 V ; 90 W
Max. input current 4 A
Protection class IP21
Weight (without torch and cables) 19 kg
Dimensions (W x H x D) 290 x 440 x 675 mm
Compliance IEC 60974-5 ; IEC 60974-10CE
297
ExpressweldExpressweldFEATURES and ADVANTAGES
Ideal for cutting operations in maintenance repair and steel installation workshops.
High performance on cutting of low alloyed steels, stainless steels and aluminium alloys.
380V-3Ph AC input power and max 60 A output current provides cutting of low alloyed steels up to 20 mm.
With the latest inverter technology, Inverter
Plasma 60-Ultra provides a smooth cutting surface despite its small dimensions.
25.5 kg weight.
Moisture separator and pressure reducer included.
Thermostatic overload protection and indicator light.
Fan cooling.
Easy to connect or disconnect torch and ground cable.
Control panel is recessed to eliminate damage. Outer transparent cover protects knobs and buttons against water and dust.
IP21S protection class.
Completely safe and user friendly.
Two years full parts and labour warranty.
Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm
Plasma 60-Ultra
Cutting Procedure
Plasma Arc Cutting
Warranty and Properties
2 Years Warranty
3Phase
20 mmCutting
Thickness380V - 3Ph
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm
1 - Power indicator light
2 - Cutting current control knob
3 - “Run/Gas Purge” selection switch
4 - Ground cable connector
5 - Cutting torch connector
6 - Air pressure gauge
7 - “Ready to Cut” indicator light
8 - “Torch/Air Pressure” indicator light
9 - Thermal protection indicator light
10 - On/Off switch
11 - Air inlet socket
12 - Power supply cable
1
2
3
5
6
7
89
4
10
11
12
EXPRESSWELD Plasma 60-Ultra
Input voltage 380 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 6.9 kW (50%)
Input current (max.) 15.0 A (50%)
12.0 A (100%)
Effective current (max.) 10.6 A (100%)
Power factor (cos j) 0.72 (50%)
Rated output current, 60 A ; 104 V (50%) voltage and duty cycle 43 A ; 97 V (100%)
Open circuit voltage 310 V (DC)
Current range 22 - 60 A
Fuse size and type 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 25.5 kg
Dimensions (WxHxD) 240 x 440 x 550 mm
298
ExpressweldExpressweldFEATURES and ADVANTAGES
Ideal for cutting operations in maintenance repair and steel installation workshops.
High performance on cutting of low alloyed steels, stainless steels and aluminium alloys.
380V-3Ph AC input power and max 60 A output current provides cutting of low alloyed steels up to 20 mm.
With the latest inverter technology, Inverter
Plasma 60-Ultra provides a smooth cutting surface despite its small dimensions.
25.5 kg weight.
Moisture separator and pressure reducer included.
Thermostatic overload protection and indicator light.
Fan cooling.
Easy to connect or disconnect torch and ground cable.
Control panel is recessed to eliminate damage. Outer transparent cover protects knobs and buttons against water and dust.
IP21S protection class.
Completely safe and user friendly.
Two years full parts and labour warranty.
Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm
Plasma 60-Ultra
Cutting Procedure
Plasma Arc Cutting
Warranty and Properties
2 Years Warranty
3Phase
20 mmCutting
Thickness380V - 3Ph
TECHNICAL PROPERTIES
Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.
Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm
1 - Power indicator light
2 - Cutting current control knob
3 - “Run/Gas Purge” selection switch
4 - Ground cable connector
5 - Cutting torch connector
6 - Air pressure gauge
7 - “Ready to Cut” indicator light
8 - “Torch/Air Pressure” indicator light
9 - Thermal protection indicator light
10 - On/Off switch
11 - Air inlet socket
12 - Power supply cable
1
2
3
5
6
7
89
4
10
11
12
EXPRESSWELD Plasma 60-Ultra
Input voltage 380 V ; 3~Ph ; 50/60 Hz
Power input @ rated output 6.9 kW (50%)
Input current (max.) 15.0 A (50%)
12.0 A (100%)
Effective current (max.) 10.6 A (100%)
Power factor (cos j) 0.72 (50%)
Rated output current, 60 A ; 104 V (50%) voltage and duty cycle 43 A ; 97 V (100%)
Open circuit voltage 310 V (DC)
Current range 22 - 60 A
Fuse size and type 20 A (retarded)
Protection class IP21S
Cooling system Fan cooling
Weight (without cables) 25.5 kg
Dimensions (WxHxD) 240 x 440 x 550 mm
299
Notes
300