Upload
duongthien
View
219
Download
1
Embed Size (px)
Citation preview
H-2
INSP
EC
TIO
NP
RO
DU
CTS
Visual welding inspection and control products
www.airliquide.ca
Digital caliper
Measuring instruments are used in metal fabrication for checking alignment, confirming dimensions
before welding and verifying weld dimensions.
Digimatic Micrometer (with data output)
• IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
• Measurement data output function is available with a water-resistant connectioncable
• Oil-resistant materials are used in all plastic components
• Auto power ON/OFF function
• ±1 µm instrumental error (75 mm/3” or less range models)
• Certificate of Conformance is included (50mm/2” or less range models)
*Anti-corrosion treatment is required after use.
ITEM NUMBER RANGE RESOLUTION ACCURACY(INCH/METRIC) (INCH/METRIC)
MIT-293340 0 - 1” (0 -25mm) .00005”/0.001mm ±.00005”
Series 293IP65 Protection
Absolute Water Proof Calipers
• Can be used in workshop conditions exposed to coolant, water, dust or oil
• Easy-to-use - no need to wipe or clean the scale
• Advanced design styling
• Incorporates absolute measurement system
• Automatic power on/off
• Data output function
• With thumb roller
ITEM NUMBER RANGE RESOLUTION ACCURACY(INCH/METRIC) (INCH/METRIC)
MIT-500672 0 - 6” (0 -150mm) .0005”/0.01mm ±.001”
MIT-500673 0 - 8” (0 -200mm) .0005”/0.01mm ±.001”
MIT-500672Series 500 withIP66/67 Dust, Water Protection
H-3
Visual welding inspection and control productsIN
SP
EC
TIO
NP
RO
DU
CTS
Steel Tape Measurers
These steel tape measurers are lightweight. The high strength
contour grip case fits comfortably in hand. The high-visibility
orange colour makes them easy to locate.
Magnetic Levels
These magnetic levels feature strong aluminum frames which
will not warp or twist. The patented epoxy vials never need
adjusting. The removable end caps allow flush measurement
in corners. The strong magnets allow to work freely.
Fillet Weld Gauges
The fillet weld gauge is used for checking alignment, confirming
dimensions before welding and verifying weld dimensions.
The picture shows the use of a fillet weld gauge.
ITEM NUMBER DESCRIPTION
LUF-L525 High-visibility orange tape measurer, 1” x 25’
LUF-HV1316 High-visibility orange tape measurer, 3/4” x 16’, 1000 series
LUF-HV1425 High-visibility orange tape measurer, 3/4” x 25’, 1000 series
ITEM NUMBER DESCRIPTION
STB-25200 Torpedo level, 25 cm (10”)
STB-21999 Level, Torpedo, 25 cm (10”), with Protractor
STB-38624 Level, 61 cm (24”), Type 96M
STB-38616 Level, 41 cm (16”), Type 96M
ITEM NUMBER DESCRIPTION
BLU-01451120 Blueshield fillet weld gauge
BLU-01451122 Blueshield cam type weld gauge
STB-25200
STB-21999
STB-38624
STB-38616
BLU-01451120
1. Checking Fillet Leg Size 2. Checking Fillet Weld Throat Size
BLU-01451122
LUF-HV1316
LUF-L525
LUF-HV1425
H-4
INSP
EC
TIO
NP
RO
DU
CTS
www.airliquide.ca
Visual welding inspection and control products
Temperature Indicator Sticks
Simple, easy-to-use temperature indicators. Ideal for a wide range of applications,from surface temperature measurement during metal working procedures (such asheat treating and welding) to the measurement of operating temperatures of bearings or motors.
Simply mark the surface and the colour will appear at the point of contact once the surface reaches the product's rated temperature.
ITEM NUMBER TEMPERATURE
TEM-TS0100 38°C (100°F)
TEM-TS0125 52°C (125°F)
TEM-TS0150 66°C (150°F)
TEM-TS0175 79°C (175°F)
TEM-TS0200 93°C (200°F)
TEM-TS0225 107°C (225°F)
TEM-TS0250 121°C (250°F)
TEM-TS0275 135°C (275°F)
TEM-TS0300 149°C (300°F)
TEM-TS0350 177°C (350°F)
TEM-TS0400 204°C (400°F)
TEM-TS0450 232°C (450°F)
TEM-TS0475 246°C (475°F)
TEM-TS0488 253°C (488°F)
TEM-TS0500 260°C (500°F)
TEM-TS0550 288°C (550°F)
TEM-TS0600 316°C (600°F)
TEM-TS0650 343°C (650°F)
TEM-TS0700 371°C (700°F)
TEM-TS0750 399°C (750°F)
TEM-TS0800 427°C (800°F)
75 mm
*Source: Canadian Welding Bureau, Training Modules.
*
*Verify preheat temperature at a minimumdistance of 75 mm laterally and in front ofwelding.
Temperature indicator stick
Heated plate
Infrared Non-Contact Thermometer
This infrared thermometer can display in °C or °F. The reading time is less than 1 second. It comes with a laser pointer for accuracy.
ITEM NUMBER DESCRIPTION
TEH-DT8812 Non-contact infrared thermometer,-50 to 500 degree Celcius.
H-5
Visual welding inspection and control productsIN
SP
EC
TIO
NP
RO
DU
CTS
1-800-817-7697
Inspection Mirrors
Original All-Angle Joint Mirrors with brushed finish stainless steel mirror backs. Fast, accurate visual inspection of hidden areas with an almost limitless number of positions. Double ball joint links swivel mirrors for 360° viewing.
Solid Paint Markers
Solid Metal Markers provide permanent marking under almost any conditions. The marks will remain bright, clear and legible even on material that are stored outside for long periods of time or material that receives heavy abuse.
ITEM NUMBER DESCRIPTION
ULL-A2 Circular Telescoping Mirror 7/8” mirror diam. Overall length 7 1/2”.
ULL-E2Circular Telescoping Mirror 1 1/4” mirror diam. Overall length 8”.
Rectangular Telescoping Mirror.
ULL-K22 1/8” x 3 1/2” mirror. Overall length 11 1/4”, extends to 15 1/4”.
Rectangular Telescoping Mirror, extra long handle.
ITEM NUMBER DESCRIPTION
NIS-SPYES Standard, Yellow
NIS-SPWHS Standard, White
NIS-SPRES Standard, Red
Paint Markers
High Temperature Metal Marker
High Temperature Metal Markers provide legible markings at temperatures as high as871°C (1600°F). Marks on any surface; rough, smooth, wet, oily or dry.
Valve Action Paint Markers
The Valve Action Paint Marker fibre tip requires very little pressure to release speciallyformulated spirit-based opaque paint from the metal barrel. The marks are lead free,very fast drying, fade and ultraviolet resistant, similar to an ink marker, but with theopacity of paint.
ITEM NUMBER COLOUR
MAR-81220 White
ITEM NUMBER DESCRIPTION
MAR-96821 Medium tip, Yellow
MAR-96820 Medium tip, White
ULL-A2
ULL-E2
ULL-K2
MAR-96821
H-6
INSP
EC
TIO
NP
RO
DU
CTS
www.airliquide.ca
ITEM NUMBER DESCRIPTION
MAR-84621 Metal tip, Yellow
MAR-84620 Metal tip, White
ITEM NUMBER COLOUR
MAR-80220 White
MAR-80725 Bleed-through, blue
Markal® and Paintstik® are trademarks of LA-CO Industries, Inc. Artline is a trademark of Shachihata Inc.
Visual welding inspection and control products
Ball Paint Markers
Ball Paint Markers are commonly used in factories where tools, rolls, dies, bins andmetal parts are marked for identification. The tough plastic bottle has a metal writingtip with a steel ball to regulate the flow of liquid paint. Comfortable and easy to use,provides bright-coloured, quick-drying lines or marks that are long lasting and weather resistant.
Paintstick Markers
Paintstick markers are solidified paint markers in stick form, combining the long-lastingdurability of paint with the ease of application of a crayon. Marks any material, surfaceor texture: rough, smooth, wet, dry, icy, rusty or even oily. These markers dry like paintwith excellent abrasion and are fade and weather resistant.
Permanent Paint Markers
Permanent print markers are designed not to erase. Use a permanent marker on anysurface where you need the print to last.
ITEM NUMBER COLOUR
ART-EK400W White
ART-EK400Y Yellow
ART-EK400BLUE Blue
ART-EK400BLACK Black
ART-EK400R Red
ART-EK400GR Green
MAR-84620
MAR-80220
ART-EK400W