2
LLC The Cyclone Technology was patented in 2003. Airports in Australia, Singapore, Indonesia, Middle East and USA have purchased this unique Cyclone Technology for Rubber& Paint Removal, Cleaning of Centre lines and AGL, Fuel&Oil Spillage Removal and Surface Retexturing The dominating advantage of our Cyclone Technology- compared with our competitors--is to provide the ability to increase the Green Footprints for Airports with its Computer controlled- one man operated technology, because of the extreme Low water consumption - 0,5 l/m² -leads to lowest waste water generating High performance data in relationship to competing systems - >2000m²/hour rubber removed with a removal rate of over 95%! No Vacuum needed, leads to lower maintenance cost-less pumps and less HP needed Less HP needed leads to 30 % less fuel use Therefore low carbon emission Extreme little influence on surface texture- prolonging lifetime of runway surface. Double effect in operation: UHP jetting together with the strong wind forces of the Cyclone effect leads to deeper cleaning without damaging Texture, Paint below rubber layer, Sealing or Visors of AGL’s. None of our competitors is as environmental friendly and performance wise effective like the Cyclone Technology. Any interested partner can proof this statement by asking the following questions: Diesel Fuel consumption per cleaned m²-- Water consumption per cleaned m²-- Engine HP needed to operate the system-- Cleaning Performance per hour at a given rubber/paint-thickness--rubber removal rate 95% (yes or no)-- chemicals used when separating waste water from rubber Cyclone Technology | 1845 West 1st Street Ste. 101 Tempe | Arizona | 85281 | United States | Direct: +1.480.345.7733 | cycloneclean.com

 · Web viewThe Cyclone Technology was patented in 2003. Airports in Australia, Singapore, Indonesia, Middle East and USA have purchased this unique Cyclone Technology for Rubber&

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1:  · Web viewThe Cyclone Technology was patented in 2003. Airports in Australia, Singapore, Indonesia, Middle East and USA have purchased this unique Cyclone Technology for Rubber&

LLC

The Cyclone Technology was patented in 2003. Airports in Australia, Singapore, Indonesia, Middle East and USA have purchased this unique Cyclone Technology for Rubber& Paint

Removal, Cleaning of Centre lines and AGL, Fuel&Oil Spillage Removal and Surface Retexturing

The dominating advantage of our Cyclone Technology- compared with our competitors--is to provide the ability to increase the Green Footprints for Airports with its Computer controlled- one man operated technology, because of the extreme

Low water consumption - 0,5 l/m² -leads to lowest waste water generating High performance data in relationship to competing systems ->2000m²/hour rubber

removed with a removal rate of over 95%! No Vacuum needed, leads to lower maintenance cost-less pumps and less HP needed Less HP needed leads to 30 % less fuel use Therefore low carbon emission Extreme little influence on surface texture- prolonging lifetime of runway surface. Double effect in operation: UHP jetting together with the strong wind forces of the Cyclone

effect leads to deeper cleaning without damaging Texture, Paint below rubber layer, Sealing or Visors of AGL’s.

None of our competitors is as environmental friendly and performance wise effective like the Cyclone Technology. Any interested partner can proof this statement by asking the following questions: Diesel Fuel consumption per cleaned m²-- Water consumption per cleaned m²-- Engine HP needed to operate the system-- Cleaning Performance per hour at a given rubber/paint-thickness--rubber removal rate 95% (yes or no)-- chemicals used when separating waste water from rubber debris--how low is filter value before UHP-Pump-- Must a Vacuum system be used- (Higher power consumption and more emissions and higher maintenance cost.)

Please take note of the US Army Corps of Engineers Case Study on 3 Rubber removal Equipment –Comparing Strip Hog8000, TrackJet and Cyclone 4006AC

For more information call or emailDieter Pade, VP Int. Sales, Nilfisk Cyclone TechnologyMobil +43 664 1256 902Email: [email protected] 29.August 2016

Cyclone Technology | 1845 West 1st Street Ste. 101Tempe  |  Arizona  | 85281  |  United States  |  Direct: +1.480.345.7733 |  cycloneclean.com