Weatherford W Series Pumps

Pump and Fluid Systems

1 © 2013-2014 Weatherford. All rights reserved. TIS0110.01weatherford.com/pumps

Pump Specifications

Rated (HP, kW) 60 45

Stroke length (in., mm) 3 76.2

Maximum discharge pressure (PSI, Bar)

W60H 5,000 345

W60M 3,200 221

W60L 1,500 103

Rated rod load (lb, kg) 4,750 2,155

API-674 speed, RPM 400

Maximum speed, RPM 500

Minimum speed, RPM 200

Crankshaft dimensions (in., mm)

Diameter 3.00 76.2

Length (both sides) 5.12 130

Keyway, width × depth (in., mm) .750 × .375 19 × 9.5

Oil capacity (gal, l)

Pump 2.0 7.6

Reducer 1.0 3.8

Weight (lb, kg); estimates only

Pump

W60H 1,220 553

W60M 1,160 526

W60L 1,120 508

Reducer 350 159

Mechanical efficiency 90%

Flange Connections

Pump Model

Discharge Connection Sizes (in., mm)

Suction Connection Sizes (in., mm)

W60H 1.25 (31.8) ANSI 2500 RJ 2.5 (63.5) ANSI 300 FF

W60M 1.5 (38.1) API 5000 RJ 2.5 (63.5) ANSI 150 FF

W60L (flanged) 2 (50.8) API 2000 RJ 3 (76.2) ANSI 150 FF

W60L (threaded) 2 (50.8) NPT 3 (76.2) NPT

Standard Equipment• Cast aluminum-bronze, forged duplex stainless steel,

or forged carbon steel fluid ends

• Aluminum-bronze or duplex stainless steel stuffing boxes

• Various valve designs offered per fluid end style

• Tungsten carbide coated plungers over stainless steel base or solid ceramic plungers

• Double extended crankshaft

• Multiple plunger packing arrangements offered

Optional Accessories• Weatherford bolt on gear reducers (ratios)

– 2.34:1 – 2.77:1

– 3.03:1 – 3.50:1

• Packing lubricators

• Customized plunger packing arrangements

• Complete pump packages

Technical [email protected] 1-281-252-7867

W60 Triplex Pump


Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.


W60 Triplex PumpPerformance Ratings

Model (standard)

Plunger Diameter

(in.)

Gallons Per Revolution

Maximum Pressure

PSI

200 RPM 300 RPM 350 RPM 400 RPM* 450 RPM 500 RPM

GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD

W60H

1.000 0.0306 5,000 6.1 210 9.2 315 10.7 367 12.2 420 13.8 472 15.3 5251.125 0.0387 4,780 7.7 266 11.6 398 13.6 465 15.5 531 17.4 598 19.4 6641.250 0.0478 3,870 9.6 328 14.3 492 16.7 574 19.1 656 21.5 738 23.9 8201.375 0.0579 3,200 11.6 397 17.4 595 20.2 694 23.1 793 26.0 893 28.9 992

W60M

1.375 0.0579 3,200 11.6 397 17.4 595 20.2 694 23.1 793 26.0 893 28.9 9921.500 0.0688 2,690 13.8 472 20.7 708 24.1 826 27.5 944 31.0 1,062 34.4 1,1801.625 0.0808 2,290 16.2 554 24.2 831 28.3 970 32.3 1,108 36.4 1,247 40.4 1,3851.750 0.0937 1,970 18.7 643 28.1 964 32.8 1,125 37.5 1,285 42.2 1,446 46.9 1,6062.000 0.1224 1,500 24.5 839 36.7 1,259 42.8 1,469 49.0 1,679 55.1 1,888 61.2 2,098

W60L

2.000 0.1224 1,500 24.5 839 36.7 1,259 42.8 1,469 49.0 1,679 55.1 1,888 61.2 2,0982.250 0.1549 1,190 31.0 1,062 46.5 1,593 54.2 1,859 62.0 2,125 69.7 2,390 77.5 2,6562.500 0.1912 970 38.2 1,311 57.4 1,967 66.9 2,295 76.5 2,623 86.1 2,951 95.6 3,2792.750 0.2314 800 46.3 1,587 69.4 2,380 81.0 2,777 92.6 3,174 104.1 3,570 115.7 3,9673.000 0.2754 670 55.1 1,888 82.6 2,833 96.4 3,305 110.2 3,777 123.9 4,249 137.7 4,721

Model (metric)

Plunger Diameter

(in.)

Liters Per Revolution

Maximum Pressure

BAR


LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr

W60H

1.000 0.1158 345 23.2 1.4 34.7 2.1 40.5 2.4 46.3 2.8 52.1 3.1 57.9 3.5

1.125 0.1466 329 29.3 1.8 44.0 2.6 51.3 3.1 58.6 3.5 66.0 4.0 73.3 4.4

1.250 0.1810 267 36.2 2.2 54.3 3.3 63.3 3.8 72.4 4.3 81.4 4.9 90.5 5.4

1.375 0.2190 220 43.8 2.6 65.7 3.9 76.6 4.6 87.6 5.3 98.5 5.9 109.5 6.6

W60M

1.375 0.2190 220 43.8 2.6 65.7 3.9 76.6 4.6 87.6 5.3 98.5 5.9 109.5 6.6

1.500 0.2606 185 52.1 3.1 78.2 4.7 91.2 5.5 104.2 6.3 117.3 7.0 130.3 7.8

1.625 0.3058 158 61.2 3.7 91.8 5.5 107.0 6.4 122.3 7.3 137.6 8.3 152.9 9.2

1.750 0.3547 136 70.9 4.3 106.4 6.4 124.1 7.4 141.9 8.5 159.6 9.6 177.4 10.6

2.000 0.4633 104 92.7 5.6 139.0 8.3 162.1 9.7 185.3 11.1 208.5 12.5 231.6 13.9

W60L

2.000 0.4633 104 92.7 5.6 139.0 8.3 162.1 9.7 185.3 11.1 208.5 12.5 231.6 13.9

2.250 0.5863 82 117.3 7.0 175.9 10.6 205.2 12.3 234.5 14.1 263.9 15.8 293.2 17.6

2.500 0.7239 67 144.8 8.7 217.2 13.0 253.4 15.2 289.6 17.4 325.7 19.5 361.9 21.7

2.750 0.8759 55 175.2 10.5 262.8 15.8 306.6 18.4 350.4 21.0 394.2 23.6 437.9 26.3

3.000 1.0424 46 208.5 12.5 312.7 18.8 364.8 21.9 417.0 25.0 469.1 28.1 521.2 31.3*API Speed

General Notes1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities

are lower, based on discharge pressure and fluid compressibility.2. API-674 and NACE-compliant designs are available; consult Weatherford for details

and exceptions to these standards.

3. For operation below 200 RPM, an auxiliary lubrication system is required.4. Standard plunger sizes are shown, however other sizes are available upon request.



Pump Specifications


Stroke length (in., mm) 3 76


W80H 5,000 345

W80M 4,270 294

W80L 2,020 139






Diameter 3.00 76


Keyway, width × depth (in., mm) .75 × .38 19 × 10


Pump 2.0 7.6

Reducer 1.0 3.8


Pump

W80H 1,250 1,572

W80M 1,190 544

W80L 1,150 508

Reducer 350 159


Flange Connections

Pump Model



W80H 1.25 (31.8) ANSI 2500 RJ 2.5 (63.5) ANSI 300 FF

W80M 1.5 (38.1) API 5000 RJ 2.5 (63.5) ANSI 150 FF

W80L (flanged) 2 (50.8) API 2000 RJ 3 (76.2) ANSI 150 FF

W80L (threaded) 2 (50.8) NPT 3 (76.2) NPT









– 2.34:1 – 2.77:1

– 3.50:1 – 3.03:1





W80 Triplex Pump


Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. For more information, contact [email protected]. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.



Model (standard)

Plunger Diameter

(in.)


Maximum Pressure

PSI


GPM BPD BPM BPD GPM BPD GPM BPD GPM BPD GPM BPD

W80H1.250 0.0478 5,000 9.6 328 14.3 492 16.7 574 19.1 656 21.5 738 23.9 8201.375 0.0579 4,270 11.6 397 17.4 595 20.2 694 23.1 793 26.0 893 28.9 992

W80M

1.375 0.0579 4,270 11.6 397 17.4 595 20.2 694 23.1 793 26.0 893 28.9 9921.500 0.0688 3,590 13.8 472 20.7 708 24.1 826 27.5 944 31.0 1,062 34.4 1,1801.625 0.0808 3,060 16.2 554 24.2 831 28.3 970 32.3 1,108 36.4 1,247 40.4 1,3851.750 0.0937 2,630 18.7 643 28.1 964 32.8 1,125 37.5 1,285 42.2 1,446 46.9 1,6062.000 0.1224 2,020 24.5 839 36.7 1,259 42.8 1,469 49.0 1,679 55.1 1,888 61.2 2,098

W80L

2.000 0.1224 2,020 24.5 839 36.7 1,259 42.8 1,469 49.0 1,679 55.1 1,888 61.2 2,0982.250 0.1549 1,590 31.0 1,062 46.5 1,593 54.2 1,859 62.0 2,125 69.7 2,390 77.5 2,6562.500 0.1912 1,290 38.2 1,311 57.4 1,967 66.9 2,295 76.5 2,623 86.1 2,951 95.6 3,2792.750 0.2314 1,070 46.3 1,587 69.4 2,380 81.0 2,777 92.6 3,174 104.1 3,570 115.7 3,9673.000 0.2754 900 55.1 1,888 82.6 2,833 96.4 3,305 110.2 3,777 123.9 4,249 137.7 4,7213.250 0.3232 760 64.6 2,216 97.0 3,324 113.1 3,879 129.3 4,433 145.4 4,987 161.6 5,5413.375 0.3486 710 69.7 2,390 104.6 3,585 122.0 4,183 139.4 4,780 156.8 5,378 174.3 5,975

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W80H1.250 0.1810 345 36.2 2.2 54.3 3.3 63.3 3.8 72.4 4.3 81.4 4.9 90.5 5.41.375 0.2190 294 43.8 2.6 65.7 3.9 76.6 4.6 87.6 5.3 98.5 5.9 109.5 6.6

W80M

1.375 0.2190 294 43.8 2.6 65.7 3.9 76.6 4.6 87.6 5.3 98.5 5.9 109.5 6.61.500 0.2606 247 52.1 3.1 78.2 4.7 91.2 5.5 104.2 6.3 117.3 7.0 130.3 7.81.625 0.3058 211 61.2 3.7 91.8 5.5 107.0 6.4 122.3 7.3 137.6 8.3 152.9 9.21.750 0.3547 182 70.9 4.3 106.4 6.4 124.1 7.4 141.9 8.5 159.6 9.6 177.4 10.62.000 0.4633 139 92.7 5.6 139.0 8.3 162.1 9.7 185.3 11.1 208.5 12.5 231.6 13.9

W80L

2.000 0.4633 139 92.7 5.6 139.0 8.3 162.1 9.7 185.3 11.1 208.5 12.5 231.6 13.92.250 0.5863 110 117.3 7.0 175.9 10.6 205.2 12.3 234.5 14.1 263.9 15.8 293.2 17.62.500 0.7239 89 144.8 8.7 217.2 13.0 253.4 15.2 289.6 17.4 325.7 19.5 361.9 21.72.750 0.8759 74 175.2 10.5 262.8 15.8 306.6 18.4 350.4 21.0 394.2 23.6 437.9 26.33.000 1.0424 62 208.5 12.5 312.7 18.8 364.8 21.9 417.0 25.0 469.1 28.1 521.2 31.33.250 1.2234 53 244.7 14.7 367.0 22.0 428.2 25.7 489.3 29.4 550.5 33.0 611.7 36.73.375 1.3193 49 263.9 15.8 395.8 23.7 461.7 27.7 527.7 31.7 593.7 35.6 659.6 39.6

*API Speed







Pump Specifications




W100H 5,000 345

W100M 3,180 219

W100L 1,660 114






Diameter 3.75 95




Pump 5.5 20.8

Reducer 3.0 11.4


Pump

W100H 3,200 1,451

W100M 3,100 1,406

W100L 3,150 1,429

Reducer 500 227


Flange Connections

Pump Model



W100H 1.5 (38.1) ANSI 2500 RJ 3 (76.2) ANSI 300 FF

W100M 1.5 (38.1) API 5000 RJ 3 (76.2) ANSI 150 FF

W100L 2.5 (63.5) API 2000 RJ 5 (127) ANSI 150 FF









– 2.61:1 – 3.15:1

– 3.42:1 – 3.89:1

– 4.27:1 – 5.23:1





W100 Triplex Pump





Model (standard)

Plunger Diameter

(in.)


Maximum Pressure

PSI



W100H

1.250 0.0637 5000 9.6 328 15.9 546 19.1 655 22.3 764 25.5 874 28.7 9831.375 0.0771 4440 11.6 397 19.3 661 23.1 793 27.0 925 30.8 1057 34.7 11901.500 0.0918 3730 13.8 472 23.0 787 27.5 944 32.1 1102 36.7 1259 41.3 14161.625 0.1077 3180 16.2 554 26.9 923 32.3 1108 37.7 1292 43.1 1477 48.5 16621.750 0.1249 2740 18.7 642 31.2 1071 37.5 1285 43.7 1499 50.0 1713 56.2 1927

W100M

1.625 0.1077 3180 16.2 554 26.9 923 32.3 1108 37.7 1292 43.1 1477 48.5 16621.750 0.1249 2740 18.7 642 31.2 1071 37.5 1285 43.7 1499 50.0 1713 56.2 19271.875 0.1434 2390 21.5 737 35.9 1229 43.0 1475 50.2 1721 57.4 1967 64.5 22122.000 0.1632 2100 24.5 839 40.8 1399 49.0 1679 57.1 1958 65.3 2238 73.4 25182.125 0.1842 1860 27.6 947 46.1 1579 55.3 1895 64.5 2210 73.7 2526 82.9 2842

W100L

2.250 0.2065 1660 31.0 1062 51.6 1770 62.0 2124 72.3 2478 82.6 2832 92.9 31862.500 0.2550 1340 38.3 1311 63.8 2186 76.5 2623 89.3 3060 102.0 3497 114.8 39342.750 0.3085 1110 46.3 1587 77.1 2644 92.6 3173 108.0 3702 123.4 4231 138.8 47603.000 0.3672 930 55.1 1888 91.8 3147 110.2 3777 128.5 4406 146.9 5036 165.2 56653.250 0.4309 790 64.6 2216 107.7 3693 129.3 4432 150.8 5171 172.4 5909 193.9 66483.375 0.4647 740 69.7 2390 116.2 3983 139.4 4780 162.6 5576 185.9 6373 209.1 7170

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W100H

1.250 0.2410 345 36.2 2.2 60.3 3.6 72.3 4.3 84.4 5.1 96.4 5.8 108.5 6.51.375 0.2917 306 43.8 2.6 72.9 4.4 87.5 5.3 102.1 6.1 116.7 7.0 131.3 7.91.500 0.3474 257 52.1 3.1 86.8 5.2 104.2 6.3 121.6 7.3 138.9 8.3 156.3 9.41.625 0.4075 219 61.1 3.7 101.9 6.1 122.3 7.3 142.6 8.6 163.0 9.8 183.4 11.01.750 0.4726 189 70.9 4.3 118.2 7.1 141.8 8.5 165.4 9.9 189.0 11.3 212.7 12.8

W100M

1.625 0.4075 219 61.1 3.7 101.9 6.1 122.3 7.3 142.6 8.6 163.0 9.8 183.4 11.01.750 0.4726 189 70.9 4.3 118.2 7.1 141.8 8.5 165.4 9.9 189.0 11.3 212.7 12.81.875 0.5426 165 81.4 4.9 135.7 8.1 162.8 9.8 189.9 11.4 217.1 13.0 244.2 14.72.000 0.6175 145 92.6 5.6 154.4 9.3 185.3 11.1 216.1 13.0 247.0 14.8 277.9 16.72.125 0.6970 128 104.6 6.3 174.3 10.5 209.1 12.5 244.0 14.6 278.8 16.7 313.7 18.8

W100L

2.250 0.7814 114 117.2 7.0 195.3 11.7 234.4 14.1 273.5 16.4 312.6 18.8 351.6 21.12.500 0.9649 92 144.7 8.7 241.2 14.5 289.5 17.4 337.7 20.3 386.0 23.2 434.2 26.12.750 1.1674 77 175.1 10.5 291.8 17.5 350.2 21.0 408.6 24.5 466.9 28.0 525.3 31.53.000 1.3895 64 208.4 12.5 347.4 20.8 416.8 25.0 486.3 29.2 555.8 33.3 625.3 37.53.250 1.6305 54 244.6 14.7 407.6 24.5 489.2 29.3 570.7 34.2 652.2 39.1 733.7 44.03.375 1.7584 51 263.8 15.8 439.6 26.4 527.5 31.7 615.4 36.9 703.4 42.2 791.3 47.5

*API Speed






1 © 2012014 Weatherford. All rights reserved. TIS0104.01weatherford.com/pumps

Pump Specifications




W130H 5,000 345

W130M 3,110 214

W130L 1,750 121






Diameter 3.75 95




Pump 5.5 20.8

Reducer 3.0 11.4


Pump

W130H 3,260 1,479

W130M 3,160 1,433

W130L 3,210 1,456

Reducer 500 227


Flange Connections

Pump Model



W130H 1.5 (38.1) ANSI 2500 RJ 3 (76.2) ANSI 300 FF

W130M 1.5 (38.1) API 5000 RJ 3 (76.2) ANSI 150 FF

W130L 2.5 (63.5) API 2000 RJ 5 (127) ANSI 150 FF









– 2.61:1 – 3.15:1

– 3.42:1 – 3.89:1

– 4.27:1 – 5.23:1





W130 Triplex Pump



2 © 2012014 Weatherford. All rights reserved. TIS0104.01weatherford.com/pumps


Model (standard)

Plunger Diameter

(in.)


Rated Pressure

PSI



W130H

1.375 0.0771 5,000 11.6 397 19.3 661 23.1 793 27.0 926 30.9 1,058 34.7 1,1901.500 0.0918 4,860 13.8 472 22.9 787 27.5 944 32.1 1,102 36.7 1,295 41.3 1,4161.625 0.1077 4,140 16.2 554 26.9 923 32.3 1,108 37.7 1,293 43.1 1,479 48.5 1,6621.750 0.1249 3,570 18.7 643 31.2 1,071 37.5 1,285 43.7 1,499 50.0 1,714 56.2 1,928

W130M

1.875 0.1434 3,110 21.5 738 35.9 1,229 43.0 1,475 50.2 1,721 57.4 1,967 64.5 2,2132.000 0.1632 2,730 24.5 839 40.8 1,399 49.0 1,679 57.1 1,958 65.3 2,238 73.4 2,5182.125 0.1842 2,420 27.6 948 46.1 1,579 55.3 1,895 64.5 2,211 73.7 2,527 82.9 2,8432.250 0.2065 2,160 31.0 1,062 51.6 1,770 62.0 2,125 72.3 2,479 82.6 2,833 92.9 3,1872.375 0.2301 1,940 34.5 1,184 57.5 1,973 69.0 2,367 80.5 2,762 92.1 3,156 103.6 3,551

W130L

2.500 0.2550 1,750 38.2 1,311 63.7 2,186 76.5 2,623 89.2 3,060 102.0 3,497 114.7 3,9342.625 0.2811 1,590 42.2 1,446 70.3 2,410 84.3 2,892 98.4 3,374 112.5 3,856 126.5 4,3382.750 0.3085 1,450 46.3 1,587 77.1 2,645 92.6 3,174 108.0 3,703 123.4 4,232 138.8 4,7603.000 0.3672 1,220 55.1 1,888 91.8 3,147 110.2 3,777 128.5 4,406 146.9 5,036 165.2 5,6653.250 0.4309 1,040 64.6 2,216 107.7 3,694 129.3 4,433 150.8 5,171 172.4 5,910 193.9 6,6493.500 0.4998 890 75.0 2,570 124.9 4,284 149.9 5,141 174.9 5,998 199.9 6,854 224.9 7,7113.625 0.5361 830 80.4 2,757 134.0 4,595 160.8 5,515 187.6 6,434 214.5 7,353 241.3 8,272

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W130H

1.375 0.2920 345 43.8 2.6 73.0 4.4 87.6 5.3 102.2 6.1 116.8 7.0 131.4 7.91.500 0.3475 335 52.1 3.1 86.9 5.2 104.2 6.3 121.6 7.3 139.0 8.3 156.4 9.41.625 0.4078 285 61.2 3.7 101.9 6.1 122.3 7.3 142.7 8.6 163.1 9.8 186.5 11.01.750 0.4729 246 70.9 4.3 118.2 7.1 141.9 8.5 165.5 9.9 189.2 11.4 212.8 12.8

W130M

1.875 0.5429 214 81.4 4.9 135.7 8.1 162.9 9.8 190.0 11.4 217.2 13.0 244.3 14.72.000 0.6177 188 92.7 5.6 154.4 9.3 185.3 11.1 216.2 13.0 247.1 14.8 278.0 16.72.125 0.6973 167 104.6 6.3 174.3 10.5 209.2 12.6 244.1 14.6 278.9 16.7 313.8 18.82.250 0.7818 149 117.3 7.0 195.4 11.7 234.5 14.1 273.6 16.4 312.7 18.8 351.8 21.12.375 0.8711 134 130.7 7.8 217.8 13.1 261.3 15.7 304.9 18.3 348.4 20.9 392.0 23.5

W130L

2.500 0.9652 121 144.8 8.7 241.3 14.5 289.6 17.4 337.8 20.3 386.1 23.2 434.3 26.12.625 1.0641 109 159.6 9.6 266.0 16.0 319.2 19.2 372.4 22.3 425.6 25.5 478.8 28.72.750 1.1679 100 175.2 10.5 292.0 17.5 350.4 21.0 408.8 24.5 467.1 28.0 252.5 31.53.000 1.3898 84 208.5 12.5 347.5 20.8 417.0 25.0 486.4 29.2 555.9 33.4 625.4 37.53.250 1.6311 71 244.7 14.7 407.8 24.5 489.3 29.4 570.9 34.3 652.5 39.1 734.0 44.03.500 1.8917 62 283.8 17.0 472.9 28.4 567.5 34.1 662.1 39.7 756.7 45.4 851.3 51.13.625 2.0293 57 304.4 18.3 507.3 30.4 608.8 36.5 710.2 42.6 811.7 48.7 913.2 54.8

*API Speed







Pump Specifications




W165H 5,000 345

W165M 3,120 215

W165L 1,650 114






Diameter 4.125 105

Length (long) 7.92 201

Length (short) 5.62 149

Keyway, width × depth (in., mm) 1.00 × .50 25 × 13


Pump 8.0 30.3

Reducer (varies with ratio) 2.25 to 3.5 8.52 to 13.25


PumpW165H 4,213 1,911

W165M 4,132 1,874

W165L 4,037 1,831

Reducer 800 363


Flange Connections

Pump Model



W165H 2 (50.8) ANSI 2500 RJ 3 (76.2) API 2000 RJ

W165M 2 (50.8) API 5000 RJ 4 (101.6) ANSI 150 FF

W165L 3 (76.2) API 2000 RJ 6 (152.4) ANSI 150 FF









– 2.80:1 – 3.22:1 – 3.46:1

– 4.00:1 – 4.38:1 – 4.78:1

– 4.96:1 – 5.74:1





W165 Triplex Pump





Model (standard)

Plunger Diameter

(in.)


Maximum Pressure

PSI

100 RPM 150 RPM 200 RPM 310 RPM* 350 RPM 400 RPMGPM BPD GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD

W165H

1.500 0.1147 5000 11.5 393 17.2 590 22.9 787 35.6 1220 40.2 1377 45.9 15741.625 0.1347 4730 13.5 462 20.2 693 26.9 923 41.7 1431 47.1 1616 53.9 18471.750 0.1562 4070 15.6 535 23.4 803 31.2 1071 48.4 1660 54.7 1674 62.5 21421.875 0.1793 3550 17.9 615 26.9 922 35.9 1229 55.6 1906 62.8 2152 71.7 24592.000 0.2040 3120 20.4 600 30.6 1049 40.8 1399 63.2 2168 71.4 2448 81.6 2798

W165M

2.000 0.2040 3120 20.4 699 30.6 1049 40.8 1399 63.2 2168 71.4 2448 81.6 27982.125 0.2303 2760 23.0 790 34.5 1184 46.1 1579 71.4 2448 80.6 2764 92.1 31582.250 0.2582 2460 25.8 885 38.7 1328 51.6 1770 80.0 2744 90.4 3098 103.3 35412.375 0.2877 2210 28.8 986 43.2 1479 57.5 1973 89.2 3058 100.7 3452 115.1 39452.500 0.3187 2000 31.9 1093 47.8 1639 63.7 2186 98.8 3388 111.6 3825 127.5 43712.625 0.3514 1810 35.1 1205 52.7 1807 70.3 2410 108.9 3735 123.0 4217 140.6 48192.750 0.3857 1650 38.6 1322 57.9 1984 77.1 2645 119.6 4099 135.0 4628 154.3 5289

W165L

2.750 0.3857 1650 38.6 1322 57.9 1984 77.1 2645 119.6 4099 135.0 4628 154.3 52893.000 0.4590 1390 45.9 1574 68.8 2361 91.8 3147 142.3 4879 160.6 5508 183.6 62953.250 0.5387 1180 53.9 1847 80.8 2770 107.7 3694 167.0 5725 188.5 6464 215.5 73883.500 0.6247 1020 62.5 2142 93.7 3213 124.9 4284 193.7 6640 218.7 7497 249.9 85683.750 0.7172 890 71.7 2459 107.6 3688 143.4 4918 222.3 7623 251.0 8606 286.9 98364.000 0.8160 780 81.6 2798 122.4 4197 163.2 5595 253.0 8673 285.6 9792 326.4 11191

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W165H

1.500 0.4343 345 43.4 2.6 65.1 3.9 86.9 5.2 134.6 8.1 152.0 9.1 173.7 10.41.625 0.5097 326 51.0 3.1 76.5 4.6 101.9 6.1 158.0 9.5 178.4 10.7 203.9 12.21.750 0.5912 281 59.1 3.5 88.7 5.3 118.2 7.1 183.3 11.0 206.9 12.4 236.5 14.21.875 0.6786 245 67.9 4.1 101.8 6.1 135.7 8.1 210.4 12.6 237.5 14.3 271.5 16.32.000 0.7721 215 77.2 4.6 115.8 6.9 154.4 9.3 239.4 14.4 270.2 16.2 308.9 18.5

W165M

2.000 0.7721 215 77.2 4.6 115.8 6.9 154.4 9.3 239.4 14.4 270.2 16.2 308.9 18.52.125 0.8717 190 87.2 5.2 130.8 7.8 174.3 10.5 270.2 16.2 305.1 18.3 348.7 20.92.250 0.9772 170 97.7 5.9 146.6 8.8 195.4 11.7 302.9 18.2 342.0 20.5 390.9 23.52.375 1.0888 152 108.9 6.5 163.3 9.8 217.8 13.1 337.5 20.3 381.1 22.9 435.5 26.12.500 1.2065 138 120.6 7.2 181.0 10.9 241.3 14.5 374.0 22.4 422.3 25.3 482.6 29.02.625 1.3301 125 133.0 8.0 199.5 12.0 266.0 16.0 412.3 24.7 465.5 27.9 532.1 31.92.750 1.4598 114 146.0 8.8 219.0 13.1 292.0 17.5 452.5 27.2 510.9 30.7 583.9 35.0

W165L

2.750 1.4598 114 146.0 8.8 219.0 13.1 292.0 17.5 452.5 27.2 510.9 30.7 583.9 35.03.000 1.7373 96 173.7 10.4 260.6 15.6 347.5 20.8 538.6 32.3 608.1 36.5 694.9 41.73.250 2.0389 81 203.9 12.2 305.8 18.4 407.8 24.5 632.1 37.9 713.6 42.8 815.6 48.93.500 2.3647 70 236.5 14.2 354.7 21.3 472.9 28.4 733.0 44.0 827.6 49.7 945.9 56.83.750 2.7145 61 271.5 16.3 407.2 24.4 542.9 32.6 841.5 50.5 950.1 57.0 1085.8 65.14.000 3.0886 54 308.9 18.5 463.3 27.8 617.7 37.1 957.5 57.4 1081.0 64.9 1235.4 74.1

*API Speed




3. For operation below 200 RPM, an auxiliary lubrication system is required.4. Standard plunger sizes are shown, however other sizes are available upon request.5. Spherical valves must be installed when using 4.00 in. plungers.



Pump Specifications




W200H 5,000 345

W200M 3,350 231

W200L 1,680 116






Diameter 4.875 124





Pump 6.5 24.6

Reducer (varies with ratio) 3.5 to 6.5 13 to 25


PumpW200H 4,707 2,135

W200M 4,792 2,174

W200L 4,842 2,196

Reducer 1,100 499


Flange Connections

Pump Model



W200H 2 (50.8) ANSI 2500 RJ 3 (76.2) API 2000 RJ

W200M 2 (50.8) API 5000 RJ 4 (101.6) ANSI 150 FF

W200L 3 (76.2) API 2000 RJ 6 (152.4) ANSI 150 FF


Gear reducer and packing lubricator optional.









– 2.27:1 – 2.89:1 – 3.25:1

– 3.36:1 – 3.69:1 – 4.38:1

– 4.84:1 – 5.56:1



• Power end lube system


W200 Triplex Pump





Model (standard)

Plunger Diameter

(in.)Gallons Per Revolution

Maximum Pressure

PSI



W200H

1.250 0.0797 5000 8.0 273 12.0 410 15.9 546 24.7 847 27.9 956 31.9 10931.375 0.0964 5000 9.6 331 14.5 496 19.3 661 29.9 1025 33.7 1157 38.6 13221.500 0.1147 5000 11.5 393 17.2 590 22.9 787 35.6 1220 40.2 1377 45.9 15741.625 0.1347 5000 13.5 462 20.2 693 26.9 923 41.7 1431 47.1 1616 53.9 18471.750 0.1562 4930 15.6 535 23.4 803 31.2 1071 48.4 1660 54.7 1874 62.5 21421.875 0.1793 4300 17.9 615 26.9 922 35.9 1229 55.6 1906 62.8 2152 71.7 24592.000 0.2040 3780 20.4 699 30.6 1049 40.8 1399 63.2 2168 71.4 2448 81.6 2798

W200M

2.000 0.2040 3350 20.4 699 30.6 1049 40.8 1399 63.2 2168 71.4 2448 81.6 27982.125 0.2303 3350 23.0 790 34.5 1184 46.1 1579 71.4 2448 80.6 2764 92.1 31582.250 0.2582 2990 25.8 885 38.7 1328 51.6 1770 80.0 2744 90.4 3098 103.3 35412.375 0.2877 2680 28.8 986 43.2 1479 57.5 1973 89.2 3058 100.7 3452 115.1 39452.500 0.3187 2420 31.9 1093 47.8 1639 63.7 2186 98.8 3388 111.6 3825 127.5 43712.625 0.3514 2190 35.1 1205 52.7 1807 70.3 2410 108.9 3735 123.0 4217 140.6 48192.750 0.3857 2000 38.6 1322 57.9 1984 77.1 2645 119.6 4099 135.0 4628 154.3 5289

W200L

2.750 0.3857 1680 38.6 1322 57.9 1984 77.1 2645 119.6 4099 135.0 4628 154.3 52893.000 0.4590 1680 45.9 1574 68.8 2361 91.8 3147 142.3 4879 160.6 5508 183.6 62953.250 0.5387 1430 53.9 1847 80.8 2770 107.7 3694 167.0 5725 188.5 6464 215.5 73883.500 0.6247 1230 62.5 2142 93.7 3213 124.9 4284 193.7 6640 218.7 7497 249.9 85683.750 0.7172 1070 71.7 2459 107.6 3688 143.4 4918 222.3 7623 251.0 8606 286.9 98364.000 0.8160 940 81.6 2798 122.4 4197 163.2 5595 253.0 8673 285.6 9792 326.4 11191

Model (metric)

Plunger Diameter

(in.)Liters Per Revolution

Maximum Pressure

BAR



W200H

1.250 0.3016 345 30.2 1.8 45.2 2.7 60.3 3.6 93.5 5.6 105.6 6.3 120.6 7.21.375 0.3650 345 36.5 2.2 54.7 3.3 73.0 4.4 113.1 6.8 127.7 7.7 146.0 8.81.500 0.4343 345 43.4 2.6 65.1 3.9 86.9 5.2 134.6 8.1 152.0 9.1 173.7 10.41.625 0.5097 345 51.0 3.1 76.5 4.6 101.9 6.1 158.0 9.5 178.4 10.7 203.9 12.21.750 0.5912 340 59.1 3.5 88.7 5.3 118.2 7.1 183.3 11.0 206.9 12.4 236.5 14.21.875 0.6786 296 67.9 4.1 101.8 6.1 135.7 8.1 210.4 12.6 237.5 14.3 271.5 16.32.000 0.7721 260 77.2 4.6 115.8 6.9 154.4 9.3 239.4 14.4 270.2 16.2 308.9 18.5

W200M

2.000 0.7721 231 77.2 4.6 115.8 6.9 154.4 9.3 239.4 14.4 270.2 16.2 308.9 18.52.125 0.8717 231 87.2 5.2 130.8 7.8 174.3 10.5 270.2 16.2 305.1 18.3 348.7 20.92.250 0.9772 206 97.7 5.9 146.6 8.8 195.4 11.7 302.9 18.2 342.0 20.5 390.9 23.52.375 1.0888 185 108.9 6.5 163.3 9.8 217.8 13.1 337.5 20.3 381.1 22.9 435.5 26.12.500 1.2065 167 120.6 7.2 181.0 10.9 241.3 14.5 374.0 22.4 422.3 25.3 482.6 29.02.625 1.3301 151 133.0 8.0 199.5 12.0 266.0 16.0 412.3 24.7 465.5 27.9 532.1 31.92.750 1.4598 138 146.0 8.8 219.0 13.1 292.0 17.5 425.5 27.2 510.9 30.7 583.9 35.0

W200L

2.750 1.4598 116 146.0 8.8 219.0 13.1 292.0 17.5 425.5 27.2 510.9 30.7 583.9 35.03.000 1.7373 116 173.7 10.4 260.6 15.6 347.5 20.8 538.6 32.3 608.1 36.5 694.9 41.73.250 2.0389 99 203.9 12.2 305.8 18.4 407.8 24.5 632.1 37.9 713.6 42.8 815.6 48.93.500 2.3647 85 236.5 14.2 354.7 21.3 472.9 28.4 733.0 44.0 827.6 49.7 945.9 56.83.750 2.7145 74 271.5 16.3 407.2 24.4 542.9 32.6 841.5 50.5 950.1 57.0 1085.8 65.14.000 3.0886 65 308.9 18.5 463.3 27.8 617.7 37.1 957.5 57.4 1081.0 64.9 1235.4 74.1

*API Speed







Pump Specifications




W250H 5,000 345

W250M 3,030 209

W250L 1,540 106






Diameter 4.875 124





Pump 6.5 24.6



PumpW250H 4,932 2,237

W250M 4,958 2,249

W250L 4,588 2,081

Reducer 1,100 499


Flange Connections

Pump Model



W250H 2 (50.8) ANSI 2500 RJ 3 (76.2) API 2000 RJ

W250M 2 (50.8) API 5000 RJ 4 (101.6) ANSI 150 FF

W250L 3 (76.2) API 2000 RJ 6 (152.4) ANSI 150 FF









– 2.27:1 – 2.89:1 – 3.25:1

– 3.36:1 – 3.69:1 – 4.38:1

– 4.84:1 – 5.56:1





W250 Triplex Pump





Model (standard)

Plunger Diameter

(in.)


Maximum Pressure

PSI



W250H

1.875 0.1793 5000 17.9 615 26.9 922 35.9 1229 55.6 1906 62.8 2152 71.7 24592.000 0.2040 4730 20.4 699 30.6 1049 40.8 1399 63.2 2168 71.4 2448 81.6 27982.125 0.2303 4190 23.0 790 34.5 1184 46.1 1579 71.4 2448 80.6 2764 92.1 31582.250 0.2582 3740 25.8 885 38.7 1328 51.6 1770 80.0 2744 90.4 3098 103.3 3541

W250M

2.500 0.3187 3030 31.9 1093 47.8 1639 63.7 2186 98.8 3388 111.6 3825 127.5 43712.750 0.3857 2500 38.6 1322 57.9 1984 77.1 2645 119.6 4099 135.0 4628 154.3 52893.000 0.4590 2100 45.9 1574 68.8 2361 91.8 3147 142.3 4879 160.6 5508 183.6 62953.250 0.5387 1790 53.9 1847 80.8 2770 107.7 3694 167.0 5725 188.5 6464 215.5 7388

W250L

3.500 0.6247 1540 62.5 2142 93.7 3213 124.9 4284 193.7 6640 218.7 7497 249.9 85683.750 0.7172 1340 71.7 2459 107.6 3688 143.4 4918 222.3 7623 251.0 8606 286.9 98364.000 0.8160 1180 81.6 2798 122.4 4197 163.2 5595 253.0 8673 285.6 9792 326.4 111914.250 0.9212 1050 92.1 3158 138.2 4738 184.2 6317 285.6 9791 322.4 11054 368.5 126334.500 1.0327 930 103.3 3541 154.9 5311 206.5 7082 320.2 10977 361.5 12393 413.1 14163

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W250H

1.875 0.6786 371 67.9 4.1 101.8 6.1 135.7 8.1 210.4 12.6 237.5 14.3 271.5 16.32.000 0.7721 326 77.2 4.6 115.8 6.9 154.4 9.3 239.4 14.4 270.2 16.2 308.9 18.52.125 0.8717 289 87.2 5.2 130.8 7.8 174.3 10.5 270.2 16.2 305.1 18.3 348.7 20.92.250 0.9772 257 97.7 5.9 146.6 8.8 195.4 11.7 302.9 18.2 342.0 20.5 390.9 23.5

W250M

2.500 1.2065 209 120.6 7.2 181.0 10.9 241.3 14.5 374.0 22.4 422.3 25.3 482.6 29.02.750 1.4598 172 146.0 8.8 219.0 13.1 292.0 17.5 452.5 27.2 510.9 30.7 583.9 35.03.000 1.7373 145 173.7 10.4 260.6 15.6 347.5 20.8 538.6 32.3 608.1 36.5 694.9 41.73.250 2.0389 123 203.9 12.2 305.8 18.4 407.8 24.5 632.1 37.9 713.6 42.8 815.6 48.9

W250L

3.500 2.3647 106 236.5 14.2 354.7 21.3 472.9 28.4 733.0 44.0 827.6 49.7 945.9 56.83.750 2.7145 93 271.5 16.3 407.2 24.4 542.9 32.6 841.5 50.5 950.1 57.0 1,85.8 65.14.000 3.0886 81 308.9 18.5 463.3 27.8 617.7 37.1 957.5 57.4 1081.0 64.9 1235.4 74.14.250 3.4867 72 348.7 20.9 523.0 31.4 697.3 41.8 1080.9 64.9 1220.3 73.2 1394.7 83.74.500 3.9089 64 390.9 23.5 586.3 35.2 781.8 46.9 1211.8 72.7 1368.1 82.1 1563.6 93.8

*API Speed







Pump Specifications




W300H 5,000 345

W300M 3,000 207

W300L 1,650 114






Diameter 4.875 124





Pump 12 46



PumpW300H 6,840 3,103

W300M 6,750 3,062

W300L 7,000 3,175

Reducer 1,100 499


Flange Connections

Pump Model



W300H 2 (50.8) ANSI 2500 RJ 6 (152.4) NSD 600 RJ*

W300M 3 (76.2) NSD 5000 RJ* 6 (152.4) NSD 600 RJ*

W300L 4 (101.6) API 2000 RJ 8 (203.2) ANSI 150 FF

*One blind and one weld neck flange provided









– 2.27:1 – 2.89:1 – 3.25:1

– 3.36:1 – 3.69:1 – 4.38:1

– 4.84:1 – 5.56:1



• Power end lube system



W300 Quintuplex Pump




W300 Quintuplex PumpPerformance Ratings

Model (standard)

Plunger Diameter

(in.)


Maximum Pressure

PSI



W300H

1.500 0.1912 5000 19.1 656 28.7 984 38.2 1311 59.3 2033 66.9 2295 76.5 26231.625 0.2245 5000 22.4 770 33.7 1154 44.9 1539 69.6 2386 78.6 2693 89.8 30781.750 0.2603 4450 26.0 892 39.0 1339 52.1 1785 80.7 2767 91.1 3124 104.1 35701.875 0.2988 3880 29.9 1025 44.8 1537 59.8 2049 92.6 3176 104.6 3586 119.5 40982.000 0.3400 3410 34.0 1166 51.0 1749 68.0 2331 105.4 3614 119.0 4080 136.0 4663

W300M

2.000 0.3400 3000 34.0 1166 51.0 1749 68.0 2331 105.4 36.14 119.0 4080 136.0 46632.125 0.3838 3000 38.4 1316 57.6 1974 76.8 2632 119.0 4080 134.3 4606 153.5 52642.250 0.4303 2690 43.0 1475 64.5 2213 86.1 2951 133.4 4574 150.6 5164 172.1 59012.375 0.4795 2420 47.9 1644 71.9 2466 95.9 3288 148.6 5096 167.8 5753 191.8 65752.500 0.5312 2180 53.1 1821 79.7 2732 106.2 3643 164.7 5646 185.9 6375 212.5 72862.750 0.6428 1800 64.3 2204 96.4 3306 128.6 4408 199.3 6832 225.0 7714 257.1 8816

W300L

2.750 0.6428 1650 64.3 2204 96.4 3306 128.6 4408 199.3 6832 225.0 7714 257.1 88163.000 0.7650 1510 76.5 2623 114.7 3934 153.0 5246 237.1 8131 267.7 9180 306.0 104913.250 0.8978 1290 89.8 3078 134.7 4617 179.6 6156 278.3 9542 314.2 10774 359.1 123133.500 1.0412 1110 104.1 3570 156.2 5355 208.2 7140 322.8 11067 364.4 12495 416.5 142803.750 1.1953 970 119.5 4098 179.3 6147 239.1 8196 370.5 12704 418.4 14344 478.1 163934.000 1.3600 850 136.0 4663 204.0 6994 272.0 9326 421.6 14455 476.0 16320 544.0 18651

Model (metric)

Plunger Diameter

(in.)


Maximum Pressure

BAR



W300H

1.500 0.7239 345 72.4 4.3 108.6 6.5 144.8 8.7 224.4 13.5 253.4 15.2 289.6 17.41.625 0.8495 345 85.0 5.1 127.4 7.6 169.9 10.2 263.3 15.8 297.3 17.8 339.8 20.41.750 0.9853 307 98.5 5.9 147.8 8.9 197.1 11.8 305.4 18.3 344.9 20.7 394.1 23.61.875 1.1310 268 113.1 6.8 169.7 10.2 226.2 13.6 350.6 21.0 395.9 23.8 452.4 27.12.000 1.2869 235 128.7 7.7 193.0 11.6 257.4 15.4 398.9 23.9 450.4 27.0 514.8 30.9

W300M

2.000 1.2869 207 128.7 7.7 193.0 11.6 257.4 15.4 398.9 23.9 450.4 27.0 514.8 30.92.125 1.4527 207 145.3 8.7 217.9 13.1 290.5 17.4 450.3 27.0 508.4 30.5 581.1 34.92.250 1.6287 185 162.9 9.8 244.3 14.7 325.7 19.5 504.9 30.3 570.0 34.2 651.5 39.12.375 1.8147 167 181.5 10.9 272.2 16.3 362.9 21.8 562.6 33.8 635.1 38.1 725.9 43.62.500 2.0108 150 201.1 12.1 301.6 18.1 402.2 24.1 623.3 37.4 703.8 42.2 804.3 48.32.750 2.4330 124 243.3 14.6 365.0 21.9 486.6 29.2 754.2 45.3 851.6 51.1 973.2 58.4

W300L

2.750 2.4330 114 243.3 14.6 365.0 21.9 486.6 29.2 754.2 45.3 851.6 51.1 973.2 58.43.000 2.8955 104 289.6 17.4 434.3 26.1 579.1 34.7 897.6 53.9 1013.4 60.8 1153.2 69.53.250 3.3982 89 339.8 20.4 509.7 30.6 679.6 40.8 1053.4 63.2 1189.4 71.4 1359.3 81.63.500 3.9411 77 394.1 23.6 591.2 35.5 788.2 47.3 1221.7 73.3 1379.4 82.8 1576.4 94.63.750 4.5243 67 452.4 27.1 678.6 40.7 904.9 54.3 1402.5 84.2 1583.5 95.0 1809.7 108.64.000 5.1476 59 514.8 30.9 772.1 46.3 1029.5 61.8 1595.8 95.7 1801.7 108.1 2059.0 123.5

*API Speed





Documents

Weatherford W Series Pumps