Metro Manila9 West 4th St., West TriangleQuezon City, Philippines 1104

CebuT-004 Jagobiao Mandaue City

Telephone:(02) 412-1127 / (02) 373-7576(02) 372-9571 / (02) 374-6172(02) 371-1833 / (02) 371-9982

Telephone:(32) 513-1376

Telefax:(32) 238-3646

Fax:(02) 412-1179

E-mail:sales@top-rigid.com

Website:www.top-rigid.com

Sole Distributor

Exclusive Distributor

House Brands

We VALUE safety. We CARE for your SAFETY.

Top-Rigid Industrial Safety Supply, Inc. provides high quality & competitive solutions for the safety requirements of various industries in the Philippines.

We specialize in providing Safety Equipment such as Person-al Protective Equipment (PPE’s), Firefighting & HazMat Ap-parel, Lockout/Tagout Devices, Label Makers, Gas Detectors, Sorbents and Spill Containment Products .

We are also committed to offering training and seminars on safety awareness and proper safety application to various companies. We also provide hazardous environment assess-ment to ascertain our customer’s safety equipment require-ments.

Top-Rigid Industrial Safety Supply, Inc is an active mem-ber of the following organizations:• Safety Organization of the Philippines Inc. (SOPI) • Occupational Safety & Health Center (OSHC)• Association of Safety Practitioners of the Philippines Inc.

(ASPPI) Authorized Distributor

© 2017 Top-Rigid. All Rights Reserved

www.top-rigid.com

PRODUCT CATALOGUE

We VALUE safety. We CARE for your SAFETY.

TABLE OF CONTENTS

Head ProtectionEye ProtectionRespiratory ProtectionFace ProtectionEar ProtectionHand ProtectionFoot ProtectionFall ProtectionBody ProtectionGas DetectorSign & Label PrintersLockout / Tagout DevicesSPC Products Other Products

23588

101315162021222629

1

HEAD PROTECTIONHARDHATS

TOP-SAFEPolypropylene shell with universal slots for accessories; 6pt. nylon suspension with ratchet type adjustment; ANSI approved. Type I-Top impact, Class E & G.

Colors available:Colors available:

VANGUARD MADE BY BULLARDPolyethylene material; 6 pt. nylon suspension, 360 deg. rotation, ratchet type adjustment; with universal slots for accessories; Compliant with ANSI/ISEAZ89.1-2009 Type I Class E & G.

ELVEX SC-100-6RVOLT™ SAFETY CAPNon-vented, w/ 6 Point Ratchet Fabric Suspension. Includes 29mm slot that ac-cepts accessories. Swiveling nape strap, for more secure fit under nape of head. Soft, comfortable brow pad. ANSI Z89.1-2009 Compliant for Type 1 Helmets.

FULL BRIM DUO SAFETY by BULLARDMade of High-Density Polyethylene (HDPE) material; 6-pt. dielectric ratchet suspension can be adjusted between hat sizes 6-1/2”-8”; compatible with 2 or 3 point chinstrap; Meets ANSI/ISEAZ89.1-2009 Type 1, class E & G.

BUMP CAP BLUE EAGLEPolyethylene plastic; 4 pt. adjustable suspension.

BLUE EAGLE ABS shell; 6 pt. suspension; pinlock ad-justment; OSHC Certified to have passed ANSI Z89.1-1986 Type 1 - top impact Classes C & G.

Colors available:

ORDINARYPolyethylene Material; 6 pt. suspension; pinlock adjustment.

Colors available:

2

ACCESSORIES

VANGUARD by BULLARD 3pt.TOP-SAFE BLUE EAGLE VANGUARD by BULLARD 2pt.

VANGUARD by BULLARD6pt. suspension with ratchet type adjustment, for Vanguard by Bullard helmets.TOP-SAFE6pt. suspension with ratchet type adjustment, for Top-Safe helmets.

BLUE EAGLE6pt. suspension with pinlock adjustment, for Blue Eagle helmets.

BUMP CAP BLUE EAGLE4pt. suspension for pinlock type adjustment, for Blue Eagle Bump Caps.ORDINARY6pt. suspension for ordinary helmet.

CAP SUSPENSION

Colors available:HI-VIZ YELLOW

HI-VIZ ORANGE

YELLOW

GREEN

RED

BLUE

GRAY

WHITE

WHITE

ORANGE

YELLOW

GREEN

RED

BLUE

WHITE

ORANGE

YELLOW

GREEN

RED

BLUE

WHITE

ORANGE

YELLOW

GREEN

RED

BLUE

Colors available:WHITE

WHITE

ORANGE

YELLOW

GREEN

RED

LIGHT BLUE

Color white. Other colors, by order only.

www.top-rigid.com

Colors available:WHITE YELLOW

**Available in 4 pt. cap suspension

Ez Cool, Hi-Vis Hard Hat Visor and Neck

SPECTACLES

3

ELVEX ALTA, SG-60C-AF

ELVEX, CHARGER, SG-811-I/O

ELVEX HELIUM 18, SG-59C-AF

ELVEX, OVR-SPEC III, SG-57C

ELVEX XENON, SG-14M

ELVEX XTS, SG-24M

ELVEX GO-SPECS II, GG-45G-AF

ELVEX MAJESTIC, SG-810-I/O

New, ballistic rated with pantoscopic angle ad-justable temples. Ballistic V rated 4x Z87+ impact velocity, 7x ANSI Z87+ energy. Clear anti-fog lens tested to US military standard MIL-PRF-31013 impact test. Polycarbonate lens absorbs 99.99% of harmful UV A,B and C 180-380nm. Meets ANSI Z87.1-2010+ and CE EN-166 standards.

Wraparound polycarbonate indoor/outdoor lens, matching translucent temples. Ultra-lightweight, only 22 grams. Soft, black universal fit nose bridge. Supercoat anti-fog lens coating. Meets with ANSI Z87.1-2003 and CE EN-166. Bal-listic V rated for impact protection.

Extremely comfortable, secure and ultra-light eyewear. Weighs only 18 grams. ErgoFit contour "drop" temples follow the shape of your head. Light, continuous pressure along the entire tem-ple securely holds the frame in place for better non-slip compliance. Contemporary rectangular

Ultra-lightweight over specs. Adjustable length drop behind the ears to prevent slipping. Economical glass ideal for visitor specs. Ballistic rated. Clear hardcoated lenses. Complies with ANSI Z87.1-2010+ and EN- 166. Tested to US Military Standard MIL-PRF-31013.

Lightweight weighs just .77 ounces (22 grams). Blue mirror lens that reduces sun glare. Hard coat lens coating. Complies with ANSI Z87.1 and EN 166.

Silver mirror lens that reduces sun glare. Hard-coat lens coating. Ballistic impact protection. Soft flexible rubber nose bridge for comfort and prevent slippage. Straight black with soft rubber black inserts temple style. Complies with ANSI Z87.1-2003 and EN-166. Also available in polar-ized lens

Can be converted to goggles. Superior anti-fog lens. Flame retardant foam on frame and elastic strap. Grey lens tint; straight with black rubber tips and black FR fabric strap temple style. Com-plies with ANSI Z87.1-2003 and EN-166. Ballistic rated. Also available in welding shade 5 and clear lenses.

Wrap-around polycarbonate clear lens. Inte-grated brow guard. Soft, black rubber temple tips. Supercoat anti-fog lens coating provides anti-scratch and anti-static. Soft, non-slip rubber nose bridge. Meets with ANSI Z87.1-2003 and CE EN-166.

EYE PROTECTION

5623AFAnti-fog coating. Polycarbonate clear lens.

VANGUARD BRANDMeets the performance requirements of ANSI Z87.1 EN166 CE.

2533AFAdjustable length Polycarbonate clear lens; anti-fog & molded-in sideshields.

2988AFAnti-fog coating; polycarbonate clear lens.

25981AFPolycarbonate grey lens. Impact resistant.

2773MBlack nylon frame; Impact resist-ant. Polycarbonate indoor/outdoor lens.

314AFPolycarbonate clear lens with anti-fog coating. Impact resistant.

2466 GrayBlack nylon frame; impact resist-ant; Polycarbonate lens; soft nosepiece.

75741MPolycarbonate indoor/outdoor lens; Anti-fog coating; Impact resistant, with adjustable temple length.

6000 GRAYBlack/Silver combination frame, grey lens with soft rubber nose-piece & inner foam lining.

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

ELVEX RXP-100 BIFOCAL , CLEARPrescription ready safety frame with clear HC/PC plano lens. Bifocal safety glass with a dual curvature mono-lens and integrated side shields. Pantoscopic angle adjustable temple that can be adjusted to 4 different lengths. Black Frame with clear lens. Complies with ANSI Z87.1-2010 (+) and CE EN-166. 99% UV Protection.

ELVEX AVION, SG-18C-AF Clear lens , Supercoat Anti-Fog. Ballistic impact protection. Complies with ANSI Z87.1-2003 and EN-166. Ballistic rated. Also available in Amber (yellow) and Indoor/Outdoor and gray lenses.

SPECTACLESEYE PROTECTION

4

PULSAFE SC1-AAvailable in Clear & Gray lens, Polycarbonate lens in wraparound design with browguard, sideshields, & adjustable temple length; anti-fog; UVB protection; meets ANSI Z87.1 & CE standards.

JACKSON, SG30Polycarbonate lens with (1.5mm) clear per-forated frame for direct ventilation; com-plies with ANSI Z87-1 & CSAZ94.3 stand-ards; US-made.

PULSAFE, LG20Made of soft, pliable plastic with clear polycarbonate lens; indirect ventilation for airflow against chemical splash; complies with CE EN166 - 2001 standards.

BLUE EAGLE, NP104Made of soft PVC material with 1.0mm thick clear polycarbonate lens; indirect ventilation for chemical application.

BLUE EAGLE, NP105Goggles for chemical application; made of soft PVC material with 1.0mm thick clear anti-fog polycarbonate lens; wide vision; indirect ventilation.

BLUE EAGLE, GWL25Goggles for welding & chipping operations; made of soft PVC material with acrylic resin lens; lift-up front; wide vision; and indirect ventilation.

PULSAFE, V-MAXXPolycarbonate lens with elastic strap; can be worn over prescription eyewear & with half mask respirators. Indirect ventilation against chemical splash with anti-fog coating. Com-plies with CE EN166-2001 standards.

BLUE EAGLE, NP102General purpose goggles; soft PVC mate-rial with perforations for direct ventilation & 1.0mm thick clear polycarbonate lens; wide vision.

PULSAFE VL1-AAvailable in Clear & Gray lens, durable & abrasion resistant-polycarbonate lens in wraparound design; anti-fog; provides 99% UVA & UVB protection; Meets ANSI Z87.1 & CE standards.

PULSAFE VISIOTG-APolycarbonate lens in wraparound design, easy fit over prescription glasses, with brow-guard, with slatted sideshield, & holes for cord; anti-fog; provides 99% UVA& UVB pro-tection; Meets ANSI Z87.1 & CE standards.

PULSAFE A800Available in clear, gray & indoor/outdoor lens; sporty style; wraparound 9-base lens design; scratch resistant coating & 99.9% UV Protection. Complies with ANSI Z87+.

UVEX BANDITSporty style, scratch-resistant, clear poly-carbonate lens; adjustable template length; with holes for cord; provides UV protection; meets ANSI Z87.1-1989 & CSAZ94.3-1992 standards; US-made.

UVEX PATRIOTAnti-scratch, sideshields & browguard; adjustable temple length; durable nylon frame in red, white & blue with US flag de-sign; UV protection; meets ANSI Z87.1-1989 & CSAZ94.3- 1992 standards; US-made.

UVEX ASTROSPECAnti-scratch, sideshields & browguard; adjustable temple length; durable nylon frame in red, white & blue with US flag de-sign; UV protection; meets ANSI Z87.1-1989 & CSAZ94.3- 1992 standards; US-made.

UVEX SKYPER X2Polycarbonate lens; choice of uvextreme AF anti-fog or ultradura-hardcoat for high impact protection; browguard & sideshields; UV protection; meets ANSI Z87.1-1989 & CSAZ94.3-1992 standard, US-made.

ALSO AVAILABLE

EYEGLASS RETAINER

EYEGLASS RETAINER CHUMS

EYEGLASS CORD

EYEGLASS CASE

GOGGLES

SGB-5Economy Microfiber draw-string Eyeware Bag, Black

www.top-rigid.com

EMERGENCY EYEWASH

EYESALINE EYEWASH CONCENTRATE

For on-site mixing with tap water to produce a sterile saline solu-tion. Available in 70 oz. or 180 oz. bottles.

ALSO AVAILABLE

Portable, gravity-operated eyewash features a 16-gallon capacity. Certified by CSA to meet the ANSI Z358.1 Stand-ard for Emergency Eyewash & Shower Equipment. US-made.

HAWS EYEWASH STATIONPORTABLE GRAVITY-OPERATED, 7500

FENDALL EYEWASH STATIONAvailable in Single Wall Sta-tion No. 512 contains one 16 oz. bottle of eyesaline solution and Double Wall Station No. 512 with two 16 oz. bottle of eyesaline solution, ready for emergency flushing & decon-tamination of the eyes & face.

EYE and RESPIRATORY PROTECTION

5

ELVEX LEGIONNAIRE, GG-25C-AF-ASImpact, splash, dust and mist resistant goggles. Anti-fog and anti-scratch coating. Indirect ven-tilation slots for superior fog resistance. Can be worn over prescription glasses; with an adjust-able elastic support strap. Complies with ANSI Z87+ and CE EN -166 requirements.

ELVEX VISIONAIRE, GG-30-AFPremium quality, high performance goggles for splash, dust and mist. Anti-fog and fits over most prescription eyewear. Smoke frame, clear lens tint with anti-fog and anti-scratch lens coating, extra wide adjustable fabric strap tem-ple style. Complies with ANSI Z87.1 and EN166.

Combination of shower & eyewash features the medically acclaimed Axion MSR eyewash & eye/face wash head

assembly. Universal emergency sign included. US-made. Certified by CSA to meet the ANSI Z358.1 Standard for

Emergency Eyewash & Shower Equipment.

HAWS, MODEL 8300/8309

Portable eyewash station made of high impact polyethylene material; weather resistant; FDA approved material; includes

70 oz. Eyesaline Concentrate, US-made.

16 gallons, Includes 180 oz. Eyesaline Concentrate, US-made.

FENDALL EMERGENCY EYEWASH STATION, PORTA STREAM I

MODEL 100, 6 GAL.

FENDALL EMERGENCY EYEWASH STATION, PORTA STREAM II, MODEL 200

SHOWER EYE/FACE WASHGOGGLES

RESPIRATORS

ORDINARYDISPOSABLE DUST MASK WITH ALUMINUM TIP, DMALightweight, disposable, non-toxic, non-woven material dust and filter mask with pressed aluminum plate at nose tip for con-tour fit.

DISPOSABLE DUST MASK

BIBARI, DUST MASK, FFP2

BIBARI, DUST MASK, FFP1

For toxic dust, mist and fume respirator without exhalation valve. Filter material for easy breathing and communication; adjust-able cushioned nose bridge and lightweight self-supporting cup design. Compliant to EN149-:2001 FFP2.

For toxic dust, mist and fume respirator with exhalation valve. Filter material for easy breathing and communication; adjustable cushioned nose bridge and lightweight self-supporting cup design. Compliant to EN149-:2001 FFP1.

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

RESPIRATORY PROTECTIONGOGGLESRESPIRATORS

6

FOAM-TYPE DUST MASKLightweight, washable foam with plastic frame.

DMF

DMFA

DMFC

Local, color blue.

Imported, color yellow foam & frame.

Imported, color yellow foam & frame, with carbon filter.

MODEL DESCRIPTIONPF5

RC201RC202RC203RC206RC209

• Pre-filter.• Cartridge for extreme dust condition.• Cartridge for organic vapor, mist & fumes.• Cartridge for organic vapor & spray painting.• Cartridge for inorganic vapor & acid gases.• Cartridge for pesticides.

BLUE EAGLEDUST MASK WITH REPLACEMENT FILTERLightweight, triangular plastic frame with flexible strap & replaceable, non-woven fabric filter.

NP22

PRF1

PF3A

DMC

FILTERS & CARTRIDGES

NP22A

HALF-MASKSINGLE CARTRIDGE, NP305 RESPIRATOR

HALF-MASK RESPIRATOR,DOUBLE CARTRIDGE,NP306

For non-toxic, non-harmful dust.

Replacement filter for DM222.

Replacement filter for DM22C.

Replacement dust mask cloth for Blue Eagle respirators.

With activated carbon filter.

Soft, durable rubber facepiece with ex-haust valve & elastic headband; cartridges sold separately.

Soft, durable rubber facepiece with twin exhaust valves & elastic headband; cartridges sold separately.

www.top-rigid.com

NORTH 550030 HALF MASK DOUBLE CARTRIDGE Made of extremely soft non-allergenic elasto-mer for comfort and fit. Contoured sealing flange eliminates discomfort caused by pressure points on facial nerves. Low dead air space improves worker comfort by limiting re-breathing of ex-haled air. Three overlapping sizes comfortably fit most users. Available in small and medium size.

NORTH RU65001M, FULL-FACE WITH 5 STRAP HEAD HARNESSSilicone full facepiece. The RU6500 includes two cartridge connections, one on each side, and a single 40mm DIN thread center port. The threaded cartridge connections are compatible with all North N Series filters and cartridges. The center port is compatible with adapters for a face-mounted Powered Air Purifying Respirator (PAPR) and a continuous flow supplied air respi-rator with center breathing tube. Cartridge sold separately.

NORTH 54001 FULL-FACE MASKHardcoated, polycarbonate lens is scratch resist-ant. Wide lens provides over 200° field of vision and excellent optics Compatible with all North® 7600 Series cartridges, filters, and accessories. Versatile respirator can be adapted to PAPR or supplied air for multiple work environments. Cartridges and filters sold separately Manufac-tured in an ISO 9001 Registered facility. NIOSH approved

BIBARI, SK-10 HALF-MASK, SINGLE CARTRIDGELIghtweight silicone material facepiece. Easy breathing protection with the advantages of easy cleaning and low maintenance. Designed to provide a high level of comfort for long period of wearing. Compliant EN140:1998 CE0120. Made in Korea.Cartridges:

A1 Organic gases & vapors

A1B1E1K1 Organic, inorganic, acid gases and vapours and ammonia

HONEYWELL FILTERS & CARTRIDGESProvides NIOSH-approved protection for workers against airborne contaminants. 2 pcs./pack.

NORTH 75SCL, MULTI-CONTAMINANTOrganic vapor, acid gas (chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, chlorine dioxide), ammonia, methylamine and formaldehyde cartridge.

NORTH N75001LOrganic vapor cartridges.

NORTH N75002L, ACID GASESAcid gas (chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, chlorine dioxide) and formaldehyde cartridges.

NORTH N75003L, ORGANIC VAPOR/Organic vapor and acid gas (chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride,chlorine dioxide) cartridges.

NORTH N75004LAmmonia and methylamine cartridges

NORTH N750052LMercury Vapor/Chlorine - Mercury vapor and chlorine cartridges with End-of-Service-Life Indicator (ESLI) for mercury vapor.NORTH N750052LMercury Vapor/Chlorine - Mercury vapor and chlorine cartridges with End-of-Service-Life Indicator (ESLI) for mercury vapor.

NORTH 7583 P100CARTRIDGE WITH FILTER, Organic vapor, acid gases and P100 combi-nation. Fits the North 7700 series halfmask and 7600 Series full face respirators.ALL CARTRIDGES SOLD BY PAIRS

SCBA

EEBA

RESPIRATORY PROTECTIONRESPIRATORS

7

Includes:• EN 137-2006 certified SCBA.• Survivair 20/20 Mask.• Passed 1.2 continuous breathing tests,

provides high reliability & stability.• Light weight, total weight only 10.4g (including 3.8 Kg cylinder), suit-

able for long time wearing.• High technology reducer design, simple & stable, easy to maintain. • High efficiency rescue outlet provides high air flow for rescue purpose.• Built in High Pressure hose with exposure hole outside, ensures user

safety. • Chest whistle provides over 90dB alarm.• Flexible Banjo connector provides more flexibility when wearing the

demand valve.

Includes:• Total Weight of the complete apparatus with

charge cylinder: Approximately 11 kg • High-pressure pneumatic gauge: 0-400

bar,photo-luminescent gauge,rubber protection and integrated alarm whistle

• Alarm activation: 55±5 bar • Alarm volume: >90 dBA • Approve temperatures: -300C-600C • Apparatus type-approvals: EN 137:2006 Type 2 • Full-face mask type-approval: Pano Mask Rescue Kit

SPERIAN, T8000 EN SCBA, 45 MINUTES, 6.8L CARBON CYLINDER SCBA855Sperian’s new series of SCBAs certified by EN standard — the T8000 EN SCBA.It strictly passed 1.2 million continuous breathing tests & provides high reliability & stability.

SPERIAN/HONEYWELL, T8000 TYPE IISperian’s new series of SCBA’s certified by EN standard—the T8000 EN SCBA. It strictly passed 1.2 million continuous breathing tests and provides high reliability and stability. And with affordable price, T8000 EN SCBA will gain the customer much more value.

Includes:• MightyLight backpack, contoured polymer

frame.• Aluminum or carbon cylinder.• Silicone facepiece with hard-coated

polycarbonate lens and nosecup.• Gauge & visual alarm.• Pressure demand second stage regulator.• First stage regulator contains pressure reducer & audible

alarm.• With a 15-year cylinder warranty, and lifetime warranty on the first

stage regulator.

SURVIVAIR PANTHER SCBA, 30, 45 & 60 MINS.The strongest, most rugged Self-Contained Breathing Apparatus (SCBA) from Survivair. NIOSH & NFPA approved.

HONEYWELL H801 N95DISPOSABLE RESPIRATORSDust & mist particulate respirator; with ad-justable nose bridge, for oil-free solid & liquid particles. NIOSH approved, complies with EN 149 standards.

Dust respirator; with carbon for nuisance level of organic vapor. With exhalation valve for exceptional comfort. NIOSH approved.

Dust respirator; with carbon for nuisance level of acid gas. With exhalation valve for exceptional comfort. NIOSH approved.

SURGICAL MASK

SM10

SM10C

DMSCotton material.

DMSFSurgical mask with foam.

High filtration mask; 3-ply; imported, with ear loops.

High filtration mask with carbon; 3-ply; im-ported, with ear loops.

10-minutes EEBA (Emergency Escape Breathing Apparatus) supplies breathing air to allow escape from toxic or oxygen-de-ficient atmospheres. Composed of a refillable Hip-Pac cylinder with quick disconnect fitting, valve & pressure gauge assem-bly, breathing tube, protective air hood & regulator. US Made.

Also available: “Cougar” SCBA, airline respirators & other Survivair products.

EEBA SURVIVAIR 10 MINUTES

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

3M 8210 N95

OTHER BRANDS

SPERIAN N9520/N1125-OVRESPIRATORS

SPERIAN N9520/N1125-AGRESPIRATORS

FACE & EAR PROTECTION

8

GOGGLESFACESHIELDS

GOGGLESEARPLUGS

BULLARD SENTINEL1, HEADGEARABS crown protector. The Flex-Gear ratchet adjusts the headband to size 6-1/2”to 8”. The brow pad, made of Sportek & offered exclu-sively by Bullard, pulls moisture away from the skin, creating a drier, more comfort-able fit. Meets or Exceeds ANSI Z87.1-2003 Standard. Visor/faceshield sold separately.

BULLARD 300B VISOR BRACKETLightweight, durable dielectric nylon brack-et, cord type. Conforms to ANSI Z87. 1-2003 Standard.

MODEL DESCRIPTION860H860P

840MG

• Clear, heat formed acetate visor 8”x 15”x .060”.• Clear, heat formed polycarbonate visor 8”x 15” x .060”. Chemical

resistant.• Dark green, flat acetate visor 8”x 15”x .040”.

FACESHIELD/VISOR BULLARD

BLUE EAGLE 633P HELMET TYPE

WELDING MASK

SELLSTROM, DP4ALL IN ONE PROTECTION

BLUE EAGLE HAND-HELD TYPE

MODEL DESCRIPTIONFC 25

FC 28

FC 28G

FC 45

FC 48

FC 48G

• Clear; 8”x 12”x 0.8mm thick; for chemical splash & dust protection; Blue Eagle.

• Clear; 8”x 12”x 1.0mm thick; for heat & impact protection; Blue Eagle.

• Color Green; 8”x 12”x 1.0mm thick; for heat, impact & welding protection; Blue Eagle.

• Clear; 8”x 15”x 0.8mm thick; for chemical splash & dust protection; Blue Eagle.

• Clear; 8”x 15”x 1.0mm thick; for heat & impact protection; Blue Eagle.

• Color Green; 8”x 15”x 1.0mm thick; for heat, impact & welding protection; Blue Eagle.

VISOR BRACKET / BROWGUARD

BLUE EAGLE A3

B1YE

Spring type; fits any helmet brand; used with Blue Eagle faceshields.

Made of polyethylene plastic; provided with sweatband for added comfort; to be used with Blue Eagle faceshields.

Polycarbonate lens with aluminum rim.

FACESHIELD / VISOR

VB

FC28G FC28 FC25

ELVEX EARPLUGS

Elvex Uni-Fit™, EP-153Disposable earplugs, corded (PVC cord) SNR37, NRR32. Color orange.

Elvex Quattro™, EP-412Contoured 4-flange, ultra-soft polymer earplugs, corded SNR26, NRR25. Color blue. Package in a case with chain.

Elvex Quattro™, EP-413Contoured 4-flange, ultra-soft polymer ear-plugs, corded with PVC cord SNR26, NRR25. Color blue. Package in a polybag.

Elvex Quattro™, EP-415Metal Detectable. Contoured 4-flange, ultra-soft polymer earplugs, corded with PVC cord SNR26, NRR25. Color blue. Package in a polybag.

Elvex, Quattro™, EP-401Contoured 4-flange, ultra-soft polymer earplugs, uncorded with PVC cord SNR26, NRR25. Color blue. Package in a polybag.

www.top-rigid.com

Elvex EP-251, Bulk-OrangeRefill pack of disposable foam earplugs, bell shaped, uncorded, SNR34, NRR32. Color or-ange. Protection level: 96-106db. 500 pcs/bag.

Elvex EPD-500-NP earplug dispenser

EARPLUGSEAR PROTECTION

GOGGLESEARMUFFS

9

OTHER BRANDS

ULTRAFIT 4000C

BLUE EAGLE EP-90

Pre-molded, reusable, triple flange, with carrying case & ball chain; NRR 25 dB; US-made.

Pre-molded, reusable, with cord & carrying case. Available in white & yellow color.

BILSOM VIKING V1Multiple position headband earmuff, an automatically shape cushions; NRR 23dB; complies with ANSI S3.19-1974 & CE EN 352 standards.

BILSOM L3Perfect for use in heavy industrial environ-ments such as steel mills & shipyards. NRR 30dB; complies with ANSI S3.19-1974 & CE EN 352 standards.

BILSOM CLARITY C3HSound management earmuffs filter out harmful noise over 82 dB, Soft cushions; Di-electric; designed for use with hardhats. NRR 25dB complies with ANSI S3.19-1974 & CE EN 352 standards.

BILSOM CLARITY C1H & C1FSound management earmuffs filter out harmful noise over 82 dB, Soft cushions; Di-electric; hat mounted style C1H. NRR 20dB & C1F Foldable design for easy storage NRR 20 dB complies with ANSI S3. 19-1974 & CE EN 352 standards.

BLUE EAGLE EM62Polyethylene cups with ABS headband; lightweight; worn in three positions; color yellow cups & black headband.

ELVEX VALUEMUFF, HB-25Lightweight and economical headband. Smart fold-out design. Rugged and fully die-lectric construction. Multi-position use. Soft, pliable SuperSeal ear cushions. Self-aligning suspension. NRR25 SNR28 Protection Level: 99-109db.

ELVEX SUPERSONIC HB-5000Lightest earmuff, smart fold-out design. Unique pressure-release headband lowers pressure placed on head. Soft, pliable Super-Seal ear cushions, rugged and fully dielectric construction. Color green and black. NRR 29. Protection Level: 102-112db.

BILSOM THUNDER, T3Noise blocking earmuffs; provides protection in the toughest noise environments; light-weight; dielectric; NRR 30 dB. Complies with ANSI S3. 19-1974 & CE EN 352 standards.

REUSABLE EARPLUGS

HOWARD LEIGHT QUIET

HOWARD LEIGHT AIRSOFT

HOWARD LEIGHT SMARTFIT

Patented“no-roll”design for easy handling & fit. NRR 26dB.

Triple flange & patented internal air cushion. With casing NRR 27dB.

Advanced CMT (Conforming Material Technology). Uses body heat to adapt to the individual shape of each wearer’s ear canal NRR 25dB.

DISPOSABLE EARPLUGS

HOWARD LEIGHT MAX

HOWARD LEIGHT MULTIMAX

HOWARD LEIGHT MATRIX

HOWARD LEIGHT LASER LITE

Polyurethane foam, soil-resistant outer skin prevents dirt buildup; available in uncorded MAX-1 & corded MAX-30 models. NRR 33dB.

Two sizes in one earplug to fit virtually every size ear canal. Polyurethane foam. NRR 31dB.

Patented “no-roll” design makes insertion easy. NRR 29dB.

Polyurethane foam. T-shape for easy inser-tion & wear. Available in uncorded LL-1 & corded LL-30. NRR 32 dB.

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

EAR & HAND PROTECTIONGOGGLESEARMUFFS

GOGGLESGLOVES

10

FIREMAN’S GLOVES LOCALSplit leather, clute pattern, design with palm patch, wool lining, knitwrist style

NYLON, ROTCSmooth nylon working gloves ideal for semicon applications.

RHINO KNITTED COTTON, C224-2Working gloves, offwhite with red trim.Thick.

RHINO KNITTED COTTON, C224-1Working gloves, off white with yellow trim. Thin.

MAONGWorking gloves; wrist-length.Also available in ambidextrous style with palm patch.

PVC-DOTTED CANVASSWorking gloves with black PVC dots on palm for extra grip; knitwrist.

LEATHER, STEELMAN’SThick working gloves; short; gauntlet

PVC-COATED, KNITWRISTColor red PVC-coated gloves with cotton lining; 10” L knitwrist; smooth finish.

PVC-COATED, 14”LColor green & red PVC-coated gloves with cot-ton lining; rough finish & smooth finish.

LATEX RUBBERAcid-resistant gloves with con-toured palm design & orange lining.Available in 14”, 18” & 24” lengths.

LEATHER & DENIM COMBINATIONShort working gloves with leather palm; gauntlet-style denim cuffs.

LEATHER & COTTON COMBINATIONShort working gloves with leather palm; knitwrist-style.

ASSURANCE® UNLINED CANNERSUnsupported latex gloves, 18 mil, 12", straight cuff diamond grip, unlined ideal for food pro-cessing. Made from component materials that comply with Federeal Regulations for food con-tact 21CFR, 170-199. ISO 9001:2008/SLS ISO 9001:2008. Sizes S-XL. Also available in natural and yellow color. Packing per case is 12 dozens.

PIP SHOULDER LENGTH PVC GLOVE/SLEEVE COMBO, 58-8857APXtraTuff oil resistant blue PVC gloves, sandy finish, 13 gauge seamless cotton liner, glove/sleeve combo attached sleeve with elastic closure. Color blue. Size S - XXL. MOQ: 48 pairs. Complies with EN388:4121 and EN374:AJK.

NEOPRENEResistant to strong acids & oil; flock-line; diamond grip design; flat cuff; 30 mil thick; color black; US-made. Available in Mapa Technic Brand, 12”& 16” lengths.

NITRILEResistant to solvents, gas & alcohol; flock-lined; color green.

Available brands:• Assurance Ansell Sol-Vex, 13”L; FDA- ap-

proved. US-made. With palm sizes: 7-10. • Malaysia, 14”L.

www.top-rigid.com

ELVEX FLAT-LINER, HB-640YPerfect balance of ultra-light weight and comfort, only 8.2 oz (232g) with medium at-tenuation level. Extra wide ear cushions and a soft padded head cushion. Low force, fork-type stainless steel headband. NRR26 SNR32 Protection Level: 99-109 db.

ELVEX, CAP MOUNTED, HM-2093QuickSnap cap mount earmuff, low profile. Construction is dielectric. Arm assembly with universal blade mounts to most slotted safety caps. NRR25. Color black/gray.

PELTOR OPTIME 105Ultra-high attenuating hearing protector with a wide, softly padded headband for comfortable, long terms use. Weight 9.3 oz. NRR 30dB. US-made.

ELVEX, PLUG-IN, COM-610Earmuff with plug-in capability for commu-nications. Connect ear muffs to audio devices via stereo plug. Large volume control on muff plus two limiter options (82/85 db). Ex-tra wide ear cushions and soft padded head cushion. Lightweight design and materials. Low force, fork type stainless steel head-band. Includes coiled cord and four plug.

GLOVES

GLOVESHAND PROTECTION

11

LINEMAN’SProvides protection against electrocution.Available in various test voltages from 500V up to 40KV. Electrosoft & Salisbury Brand.

CUT-RESISTANT, SEAMLESS 9”L COLOR GREYSeamless; made of glass fibre with nylon, level 5; elastic cuff style.

ATG MAXIFLEX®, ULTIMATE™, 34-875Micro-foam nitrile coated gloves. Delivers 360° breathability. Controlled grip. 3/4 dipped coat-ing, 25cm length, color black with dark grey liner. Complies with EN388-4131 standard.

ATG MAXIFLEX®, ULTIMATE™, 34-874Micro-foam nitrile coated gloves. Delivers 360° breathability. Controlled grip. Palm dipped coating, 25cm length, color black with dark grey liner. Complies with EN388-4131 standard.

ATG MAXIFLEX®, ENDURANCE™, SEAMLESS KNITS FOR GENERAL DUTY, 34-845Micro-foam nitrile coated gloves. Delivers 360° breathability. Controlled grip. Raised micro-dots to increase durability and cushioning. 3/4 coating, 25cm length, color black with dark grey liner. Complies with EN388-4131 standard.

ATG MAXIFLEX® ACTIVE™ATG, 34-8264 (PINK) & 34-824 (BLUE)Micro-foam nitrile coated gloves. Airtech technology delivers 360° breathability. Class leading form, fit and feel, reducing hand fatigue and increasing comfort. Palm dipped coating, 25cm length. Complies with EN388-4131 standard.

ATG MAXIDRY® 56-425Nitrile coated gauntlet. Superior grip in oily and wet environments. Provides snug fit. 3/4 dipped coating, 25cm length, color purple/black with grey liner. Complies with EN388 standard.

ATG MAXICUT®FOR CUT PROTECTION 19-D475Cut-resistant, Nitrile coated gloves. EN388 Level 5 cut resistance, ANSI level 4. 3/4 dip coating, color grey. Complies with EN388-4543 standard.

ATG MAXICHEMCUT® 56-633 Cut resistant, multi-polymer blended gauntlet. Chemical Resistant (EN374-3 AKL). Superior grip in oily and wet environments. Gauntlet coating, 12” length, color green/black with

KEVLAR, TERRYCLOTHThick terry cloth gloves combine superior insulation against heat & cold with abra-sion resistance. All seams sewn with kevlar thread. Withstand temperatures up to 650 deg. F. 14”L.

STAINLESS STEEL WIRE MESHProvides the highest level of protection against cut, slash & laceration hazards in cutting operations. Corrosion-resistant; re-versible; Available in sizes: XXS, XS, S, M & L.

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

ATG MAXIFLEX CUT 34-8743Patented micro-foam nitrile coating. Reinforce-ment between the thumb and forefinger. Optimized grip. Silicone free. Seamless knit engineered yarn. Continuous knit cuff style. Conforms to EN388:4331 level 3 cut resistance, ASTM F1790:544 grams. Color green. Sizes: XS to XXL.

ATG MAXICUT® ULTRA 5 44-3745Lightweight, cut-resistant, Mircro-Foam nitrile coated glove. Level 5 cut resistance. High performance yarns and fibers promote cut protection in addition to high levels comfort. Palm coating, color Blue/Black. Sizes: XS to XL. Complies with EN388-4542 standard.

ATG MAXICHEM® 56-635Ultra lightweight, nitrile coated gauntlet. Chemical Resistant (EN374-3 AKL). Superior grip in oily and wet environments. Excellent dexterity due to strategic placement of coat-ing. Gauntlet coating, 14” (35cm) length, color green/black with grey liner. Sizes: XXS to XXL. Complies with EN374-3 AKL standard.

ATG MAXIDRY® 56-426Ultra lightweight, nitrile coated gauntlet. Superior grip in oily and wet environments. Locking cuff prevents the glove from slipping; elasticated wrist support provides snug fit. Drivers coating, 25cm length, color purple/black with grey liner. Complies with EN374 standard.

ATG ULTIMATE HI-VIS ORANGEUltra-lightweight, knitwrist, micro-foam nitrile coated gloves. Airtech technology delivers 360° breathability. Class leading form, fit and feel, reducing hand fatigue and increasing comfort. Palm dipped coating, 25cm length, color black with orange liner. Sizes: XXS to XXL. Complies with EN388-4131 standard.

G-TEK 16-570PolyKor™ shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance. Color: Gray 13 Gauge PolyKor Blended Shell, Black Polyurethane Coated Palm and Fingers. EN4532.SIZES: XS - XXL

LINEMAN’S LEATHER PROTECTORLeather gloves worn over lineman’s gloves for added protection. With belt for tighten-ing adjustment. Color white with gray cuffs.

HAND PROTECTIONGOGGLESGLOVES

12

RHINO KEVLAR, C236Garterized kevlar gloves with lining. Color yellow. Cut and heat resistant that can stand up to 150 deg C.

RHINO COW SPLIT LEATHER LC214Cow split leather, with cotton & reinforced palm, half lined.

RHINO COW SPLIT LEATHER LC210Cow split leather, with blue-red-black striped cotton, half lined.

RHINO LATEX COATED KNITTED COTTON, GREEN 9.5”L, L220PVC-coated cotton knitted; seamless; yellow cotton knitted with green PVC applicable on handling on sharp objects & chemical. Available sizes 8, 9, 10 & 11.

RHINO MECHANIC, M212Mechanic gloves, simulated leather rein-forced palm, spandex size 10.

RHINO NITRILE-COATED, NYLON BLACK 9.5”L, N220Seamless, nylon material coated with a tacky, flat dipped nitrile black for dexterity & gripping, stretchable knitwrist style.Available sizes 9, 10 & 11.

RHINO ANTI-STATIC, PU227Anti-static ESD PU gloves with liner. Palm size: 10.

RHINO ANTI-STATIC, PU219Anti-static gloves. Palm sizes: 7, 8 and 9.

RHINO COWHIDE SPLIT LEATHER LC223Designed for welders. Split leather material. Fully-lined. Color red.Available in 35cm & 40cm L.

RHINO COWHIDE SPLIT LEATHER UNLINED 13-14”L, LC222For welding application; unlined, natural color.

RHINO TIG GLOVES, LC221For light & medium handling in wet or slightly oily conditions. Water-repellant cow grain leather. Gunn cut, wing thumb, elastic on the back. 10”long. Color beige/cream. Available sizes 8, 9, 10 & 11.

RHINO PVC-DOTTED COTTON, C225Working gloves with PVC dots on palm for extra grip; knitwrist style.

RHINO COTTON W/ DOTTED PALM, C222Working gloves, with dots on palm.

RHINO CUT-RESISTANT, CNG209Cut resistant gloves level 5 with black nitrile coating, rough finish, elastic cuff style.

MAXIMUM SAFETY® MAD MAX II 120-4050PVC dot sythetic leather palm, hi-vis lime foam laminated spandex fabric back, diamond grip PVC impregnated fingertips and thumb crotch reinforcements, Color hi-vis lime yellow with gray and black. Size S-XXL

ALSO AVAILABLE

DISPOSABLE POLYETHYLENE GLOVES

LATEX RUBBER FINGER COTS

DRIVING GLOVES OPEN OR CLOSED

FINGERS

HOUSEHOLD RUBBER GLOVES

DISPOSABLE SURGICAL GLOVES

DISPOSABLE LATEXEXAMINATION GLOVES

TRAFFIC GLOVES

www.top-rigid.com

RHINO KNITTED COTTON W/ RUBBER COATED PALMWorking gloves, color orange, rubber-coated palm for extra grip.

GRIPPAZ 308 HEAVY NITRILE

AMBIDEXTROUS

AMBIDEX 63-331PFAP NITRILE, DISPOSABLE

FOOT PROTECTIONSAFETY SHOES

13

ARGYLE145mm high lace-up ankle boot made with waterproof leather. Fully-lined. With steel toe, steel & polyurethane midsoles & nitrile rubber outsole. Heat-resistant to 130 deg. C. Color claret. Sizes 3-14.5 (full and half-sizes), 15 & 16.

CANBERRA145mm high lace-up ankle boot. Water-resistant upper, padded ankle, tongue & collar. With non-metallic high impact polymer alloy (Hi-PA) safety toe caps that will not transmit electricity. Uses outlast temperature regulating lining & Ortholite sports footbed. Anti-static.Available in Black & Whiskey color. Sizes 3 - 14,15 & 16.

ROCKHAMPTON120mm high sports style ankle boot. Water-resistant suede/leather combo upper, padded tongue & collar. With non-metallic high impact polymer alloy (Hi-PA) safety toe caps that will not transmit electricity. Uses directly-mould-ed composite midsole with nitrile rubber outsole. Uses Outlast temperature-regulating lining & Ortholite sports footbed. Anti-static. Available in gray color. Sizes 3 -14, 15 & 16.

SOUTHERN CROSSSafety Shoes for Ladies. Lace up 150mm ankle boot with padded collar and tongue. With steel toe and nitrile rubber outsole. Heat-resistant to 130 deg. C. Accepted by the American Podiatric Medical Association. Complies with ASTM F2413-05 (EH) standards. Australian brand. Available in size 3 - 14-1/2, in full and half-sizes.

WARRAGULThe world’s most comfortable safety shoes/boots. 150mm ankle high lace up boot. With steel toe; chemical, oil and water resistant leather. Featuring heat and chemical resistant Kevlar thread. Heat-resistant to 130 deg. C. Accepted by the American Podiatric Medical Association. Complies with ASTM F2413-05 (EH) standards. Whiskey color. Australian brand. Available in size 3 - 14-1/2, in full and half-sizes.

STEEL BLUEThe world’s most comfortable safety shoes/boots. Uses trisole comfort technology (TCT) utilizing Poron inserts which provide cushioning where most needed.Accepted by the American Podiatric Medical Association (APMA). Complies with ANSI Z41, AS/NZS 2210.3 & CE EN 345-1:1993 standards. Exceeds all international 200 joule impact test. Australian brand.

WAGGA135mm high lace-up hiking shoes made of water-proof suede leather with padded collar & tongue. Fully-lined. Extra soft padding around the foot. With steel toe. Polyurethane midsole and Thermo Plastic Urethane (TPU) outsole. Color charcoal gray with blue trim. Sizes 3-14.5 (full and half-sizes), 15 & 16.

TORQUAYlso promotes good foot health. 145mm high lace and zip-up ankle boot. Water-resistant full grain waxy nubuck leather with outlast linings. With 200J Airport friendly toecap, lightweight, temperature regulating lining, Mako Toe Guard, ortholite footbed, zip fastener for quick closure and simple release. Exceeds all international 200 joule impact test. With TPU rubber outsole. Anti-static. Available in black or wheat nubuck color. Complies with AS/NZS 2210.3:2000, EN ISO 20345 & USA ASTM F2413 standards. Australian brand. Available in size 3 - 14.

EVEREST

HOWLER

With EVA footbed with poly mesh cover. With 200J steel toe caps, PU Injection anti-static midsole & thermoplastic urethane outsole. Complies with AS/NZS 2210.3 Class 1 Standards, American Standard ASTM F2413 & European Standard EN ISO 20345.

AMAZON

SAHARA

CANYON ZIP

Please inquire at our office for description.

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

CANYON

SIMPSON

KALAHARI

UBERSAFEUBERSAFE, AS13236, GRAYOutdoor Style Safety Shoes made of upper Black and Yellow Suede Leather and Gray Poly Mesh. With EVA foot bed with poly mesh cover. With Steel Toe Caps, PU pre-moulded midsole with Steel Plates and Rubber outsole. Compliant with ASTM F2413-11 EH.

UBERSAFE, AS13237, BROWNOutdoor Style Safety Shoes made of upper Brown Suede leather and Orange Poly Mesh. With EVA foot bed with poly mesh cover. With Steel Toe Caps, PU pre-moulded midsole with Steel Plates and Black/Orange rubber Outsole. Compliant with ASTM F2413-11 EH.

UBERSAFE, AS16215 ORANGE/BLACKOutdoor Style Safety Shoes made of TPU Poly Mesh. With KBX foot bed for added comfort. With Steel Toe Caps, Steel Plates and rubber outsole. Compliant with ASTM F2413-11 EH.

KPR O-O55BNon-metallic low cut blue PU microfiber vel-cro PU/Rubber insert safety shoes, composite toe cap, non-metallic anti-perforation board, exclusive Japan microfiber material, BK mesh lining, lightweight PU with special formu-lated rubber outsole, color blue, complies with ESD. Sizes UK2 to 10

KPR K-800Non-metallic series. Low cut eyelet lace up safety shoes. Composite toe cap with kevlar midsole. Non-metallic anti-perforation board sole protection. Buffalo full grain printed leather material. Cambrelle lining. Dual density PU/PU outsole. Thick comfort EVA, provide support and comfort. Color black.

KPR K-803Non-metallic series. High cut lace up safety boots. Composite toe cap with kevlar midsole. Non-metallic anti-perforation board sole protection. Buffalo full grain printed leather material. . Thick comfort EVA, provide support and comfort. Color black. Sizes: 2”-13”, no half sizes.

KPR M-027GMid cut grey suede lace up sports type safety shoes. Composite toe cap with kevlar midsole. Non-metallic anti-perforation board sole protection. Dual density air PU foam. Heat resistance up to 300 deg C. Color grey. Sizes: 2”-12”, no half sizes. ESD compliant. Comes with a FREE Shoe brush.

UBERSAFE, AS16216 YELLOW/BLACKOutdoor Style Safety Shoes made of upper microfiber with mesh material. With KBX foot bed for added comfort. With Steel Toe Caps, Steel Plates and rubber outsole. Compliant with ASTM F2413-11 EH.

FOOT PROTECTION

14

WITH STEEL TOEDurable PVC rubber boots with steel toe; water-, oil-, acid- & chemical-resistant. Color black with yellow sole.

BRANDS

Matte finish. Kneelength, mid-cut or low-cut. Sizes 5” to 10”,no half-sizes.

SUPERTUFF

Imported brand. Kneelength only. Sizes 5-12,no half-sizes.

INYATI

Steel toe & steel plate. 15” high. Sizes 6-13, no half sizes. OSHC certified to ANSI Z41-1999. Approved for heavy duty works Class 75.

RHINO

SUPERTUFF, WITHOUT STEEL TOEMatte finish. Sizes: 5” to 10”, no half sizes.Colors: White & black.

Kneelength 14” high

Mid-Cut 12” high

Low-Cut 10” high

KINGPOWER, KPRLeather upper, with steel toe caps & midsole; single foam; laced type; remov-able foot bed with moisture absorbing & hypoallergenic lining; with injection-molded double density, oil- & solvent-re-sistantpolyurethane sole, anti-slip design; meets CE EN 345-1 approval. Color black. Sizes: 5”-12”.

STEELEMade of upper cow leather; comfort foam with oil & acid resistant; anti-slip; anti-static. Double density polyurethane sole & steel midsole.Conforms to CE BS EN345.Tested at OSHC based in ANSI Z41.Color black Sizes: 3” - 12” , no half sizes.

HIGH-CUT K801 LOW-CUT K901

O-807 WHITE LOW-CUT SLIP-ON TYPE

www.top-rigid.com

SAFETY SHOES

LOW-CUT

HIGH-CUT

15

FALL PROTECTIONFULL BODY HARNESS

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

MILLER LANYARD ME05Twin webbing shock-absorb-ing lanyard, comes with cara-biner & two 50 mm scaffold hooks. Rated at 25KN, 5,500 lbs. capacity. Length 2m. CE EN-approved.

MILLER FULL BODY HARNESS 850-72” width nylon webbing with 3 D-rings; quick connect chest, sides & leg straps with adjustable matting buckles. Complies with ANSI Z359.1 standards.

HONEYWELL MB9006 LANYARD Rope type 6' long with type 2 energy absorbing lanyard with double lock scaffolding hook (50mm opening) and auto-twist carabiner. Meets Singapore Standard SS528:Part6:2006 and EN355:2002 standard.

MILLER DURAFLEX®FULL BODY HARNESS LINEMAN’S

P/N 1002853

HONEYWELL MB9007 LANYARD

HONEYWELL MB9000FULL BODY HARNESS

2” width nylon webbing with 3 D-rings; quick connect chest, sides & leg straps with adjustable matting buckles.

Complies with ANSI Z359.1 standards.

Twin rope with type 2 energy absorbing lanyard with two double lock scaffolding hooks (50mm opening) and auto-twist carabiner. Meets Singapore Standard SS528:Part6:2006 and EN355:2002 standard.

Made of polyester material with 1-point rear anchorage D-ring. Lightweight, durable polyamide webbing for all day comfort and dependability. Universal size. Color yellow and black. Matting buckles on chest and legs. Meets Singapore Stand-ard SS528:Part6:2006 and EN361:2002 standard.

LANYARDS & SAFETY BELTS

PARACHUTE TYPE TOP-SAFE SB-9468Made of durable synthetic 2” nylon webbing, comes with a single D-ring at the back, matting buckle for leg straps. It comes with a removable positioning belt. Color black, red & blue combina-tion. Complies with EN365:1992 & EN361:2002.

LANYARD H-309

LANYARD EF-31

LANYARD EF-322

MILLER LANYARD 216WLS6 feet long; comes with double lock hooks on both ends; with shock-ab-sorbing properties. Complies with ANSI Z359.1 standards.

TITAN LANYARD, SHOCK-ABSORBING, WEBBING TYPE P/N 10045796 feet long webbing, shock absorbing webbing lanyard with scaffolding hook & carabiner. Complies EN354/EN355 standards.

TITAN LANYARD, SHOCK-ABSORBING,ROPE TYPE P/N 10045916 feet long webbing, shock absorbing rope lanyard with scaffolding hook & carabiner. Complies EN354/EN355 standards.

SAFETY BELTSNP474 NP737

NP727D

NP758

BODY PROTECTIONFREEZER JACKET & PANTSMade of nylon oxford material & insulat-ed foam. Jacket has hood & drawstring, garterized wrists, zipper closure with front flap & velcro. Pants have garterized waist & ankles. Colors available:White, blue, fatigue green & neon green.

Also available in cotton twill material.

WELDING JACKETS

LEATHER MAONG HALF-JACKETWITH BIB

MAONG WOOL

SLEEVES

KEVLARKNITTED COTTON

RAINCOATS

Water-resistant. Color orange. Available in jacket & pants or kneelength Sizes available: S-M-L-XL-XXL.

PVC with nylon inserts. Water- & chemical-resistant. Color yellow. Avail-able in jacket & pants set, kneelength or poncho.Sizes available: S-M-L-XL-XXL.

JACKET & PANTSKNEE LENGTH

PVC

SIT

LEGGINGS

MAONG

LEATHER

APRONS

MAONGALUMINIZED LEATHER

PVC SIT

RAINCOAT, HIGH VISIBILITY JACKET AND PANTS, WITH HOOD AND REFLECTIVE TAPE, IS-200

RHINO, JACKET & PANTS WITH HOOD REFLECTIVE TAPE

High grade PVC/polyurethane combination material. Color hi viz yellow with navy blue on bottom parts of coat and pants, 2 stripes of silver reflector around the waist, arms and pants. With snap on and zipper front, 2 front waist pockets. Garterized pants. Available size: S-M-L, XL, XXL

Fully waterproof, soft fabric polyester material. With corrosion resistant zipper, storm flap and buttons. Elastic wrist. Vents for breathable back and arms. With two horizontal reflector-ized strips on arms & legs.

PROTECTIVE CLOTHING

16www.top-rigid.com

BODY PROTECTION

GOGGLESPROTECTIVE CLOTHING

100% COTTON & COTTON TWILLC0VERALLS

Working coveralls, available in many colors. Sizes available: S-M-L-XL-XXL

Also available: SIT & Vinyl coveralls for chemi-cal splash protection.

COTTON TWILL

ULTITEC 500For light protection against non-toxic liquids and dust. Approval: CE Category 1.Available in sizes S, M, L & XL

ULTITEC 1000LProvides great pro-

tection against haz-ard particulates with higher breathability

at economic cost, ideal for working in warm environment.

Passes Type 5 BS EN ISO 13982-1, Type 6 BS EN 13034 and EN1073-2. Available in sizes S, M, L & XL

ULTITEC 1000FRFlame retardant. Passes EN1149-5 for anti-static property, EN1073-2 and EN ISO 14116 Index 1/0/0 for protection against occasional and brief contact with sparks and small flames. Available in sizes S, M, L & XL

ULTITEC 2000Premium protection against chemical liquid and blood pen-etration resistance. Passes EN1149-5, EN1073-2 and EN ISO 14126.Available in sizes S, M, L & XL

ULTITEC COVERALLS

TRAFFIC VEST, IMPORTED

HIGH VISIBILITY VEST SV-302

X-TYPE VEST REFLECTOR,

REFLECTORIZED VEST

OTHER PRODUCTS

Red-orange nylon mesh material with reflector-ized lime green tape.

100% polyester material with 3M reflective silver tape; complies with CE EN 471 Class 2 standard.

Reflectorized Vest, X-type at the back. Colors available: Orange, Green and Yellow.

• Head Covers• Bouffant Caps• Disposable Shoe Covers • Laboratory Gowns • Smock Gowns With Hood • Bunny Suits, With Hood,

Mask and Booties• 313-1300 T-shirt Long

Sleeves, ANSI Type R Class 3 Crew Neck

FRONT

FRONT

STV-7007 STV-7002 STV-7001

BACK

BACK

ALSO AVAILABLESUPERTUFF BRAND

HEAD COVER

BOUFFANT CAP

SHOE COVER

SMOCK GOWN BUNNY SUIT

BODY PROTECTION

17 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

Passes EN14126 for protection against biological hazards and infective agents (Type 3-B, 4-B). Provides numerous chemi-cal protection including 98% sulphuric acid, 10% formaldehyde and ethylene glycol. Sizes: S-2XL. Type 3 CE certified. Color yellow.

ULTITEC 4000

313-1300 T-SHIRT

BODY PROTECTION

HELMET LOCAL

COAT & PANTS LOCAL

GLOVES LOCAL

BOOTS LOCAL

FIREMAN’S APPAREL LOCAL

Made of fiberglass materials, complete with ratchet type suspension, neck protector & screw-type visor.

Made of cotton twill material.

Split leather, clute pattern, design with palm patch, wool lining, knitwrist style.

14” H, with steel toe, color black with yellow sole, Supertuff.

FIREDEX HELMET 911

CHIEFTAIN/FIREDEX COAT & PANTS

FIREMAN’S GLOVES

RANGER® FIREWALKER BOOTS

FIREMAN’S APPAREL IMPORTED

Fiberglass composite outer shell, Clear polyphosphate carbonate faceshield, NFPA1971-2013 edition.

Nomex outer shell, with Steadair 3000 moisture barrier & Nomex

quilted thermal barrierNFPA1971-2013 edition.

Cowhide leather, knitwrist cuff, wing thumb, & five-fingered gloves. NFPA1971-2013 edition.

Built-in polyfoam insulation to guard against extreme heat. NFPA1971-2013 edition.

PROTECTIVE CLOTHING

18www.top-rigid.com

PROVEST II, ELVEX, JE-50M

PROVEST II, ELVEX, JE-70SM

PROCHAPS, ELVEX, JE-9036

PROCHAPS, ELVEX, JE-9133

Multi-layered Prolar padding, unique Prolar explosion action, breathable, water resistant 65/35 poly-cotton blend material. 1 inside pocket. Color orange and blue combination.

Multi-layered Prolar padding, unique Prolar explosion action, breathable, water resistant 65/35 poly-cotton blend material. Open side design with mesh black panel. Six handy pockets. Four full cut sizes with multi-point adjustments and over/under sizing.

Apron style, 420 denier, water resistant, 36” from waist, provides lower leg wraparound calf protec-tion. Tested and certified by Under-writer Laboratories in accordance with ASTM-F-1414 and meets ASTM Standard F-1897-2008 that requires an upgraded level of protection to 2,750 feet per minute.

Wraparound calf protection with straps, 1000 denier, water resistant, 33” from waist. Tested and certified by Underwriter Laboratories in accordance with ASTM-F-1414 and meets ASTM Standard F-1897-2008 that requires an upgraded level of protection to 2,750 feet per minute.

ELVEX CHAIN SAW SAFETY SERIES

PROTECTIVE CLOTHING

ALUMINIZED HOOD

ALUMINIZED COAT

ALUMINIZED TROUSERS

ALUMINIZED BOOTS

ALUMINIZED GLOVES

ALUMINIZED APPAREL

Wide field of vision; with ABS cap & tempered fixed glass lens.

Full sleeves with close neck design, button-down front with flap, 48” chest, 30” length, one size only.

Fly button front, 5 belt loops, 36” waist, 40” length, one size only.

With steel toe, 9” high.

14” length; soft padded palm.

Lined, non-asbestos foil bound fabric, for radiant heat protection.

Flash-Pro Arc Flash Protection Kit, Category 1-4. Arc Flash Protective Clothing Kit, Salisbury 8cal/cm2, SKCA8

Arc Flash Protective Clothing Kit, Salisbury 12cal/cm2, SKCA11TC-BP

Arc Flash Protective Clothing Kit, Salisbury 20cal/cm2, SK20

Arc Flash Protective Clothing Kit, Salisbury 31cal/cm2, SK31

Arc Flash Protective Clothing Kit, Salisbury 40cal/cm2, SK40

Arc Flash Protective Clothing Kit, Salisbury 55cal/cm2, SK55

Arc Flash Protective Clothing Kit, Salisbury 75cal/cm2, SK75

Arc Flash Protective Clothing Kit, Salisbury 100cal/cm2, SK100

ELVEX BRAND

APPLICATIONS

ARC FLASH

SALISBURY BRAND

19 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

BODY PROTECTION

GAS DETECTOR & PRINTERSGAS DETECTOR SIGN & LABEL PRINTERS

A World of Protection In The Palm of Your Hand.

Single gas detectors that provide protection at its most affordable!

BIOSYSTEMS “PhD6”

BIOSYSTEMS “MultiPro”

BIOSYSTEMS “ToxiPro”

The PHD6 Features Design

Features

Sensors and Calibration

The World’s Most Advanced Confined Space Gas DetectorConfigurable gas detector with 5 sensor ports & up to 6 channels of detection. Reliable, sophisticated, easy to use. Constructed of an impact engineered polycarbonate frame with rubber overmold. Comes with a manual sample draw kit.

• Rugged polycarbonate case with TPE overmold• One button operation for daily usage including automatic calibration • Easy-to-read top-mounted graphic display with configurable backlight

• Smart sensors detect up to 4 gases all at once (O2, LEL, CO and H2S).

• Compact & rugged design, with over-molded boot.

• One button operation. • Easy to read backlit display.• Audio & visual alarms. • Automatic event logger, black-box recorder &

optional data logging software.• Alkaline or rechargeable (Li-Ion) battery

configuration. • Sold as unit only, confined space kit or value

pack.

Free Training on maintenance & proper usage for all gas detectors.Please contact our office for more details.

Biosystem’s had one new single gas detector that provides more features at the lowest price compared to any other single gas detector in the market. The ToxiPro is a fully serviceable, reus-able gas detector with real-time, peak, STEL&TWAreadings, as well as a 20-incident

event logger & black box recorder. A fully enabled datalogger is also available for theToxiPro. The unit is compact, 8.4 x 5.5 x 2.9 cm (3.3” X 2.2” X 1.2”) & feature Visual Alarm, (LED)/ IRDA Port, Audible Alarm Port, Sensor Port, Mode Button & LCD Display.

• 5 sensors. Select from O2, LEL, PID and 14 toxic sensors• Use the Duo-Tox two channel CO/H2S sensor to achieve 6 channel

functionality • Field replaceable sensors• One button auto calibration• Calibration due reminder• Sensor span reserve indicators during calibration for predictive mainte-

nance

BBP37 COLOR & CUT SIGN & LABEL PRINTERAutomatic label setup, 20-second material change out, and a 5-inch per second print speed, with 28 different industrial grade label and ribbon materials to choose from, you can print visuals for nearly any facility application.

20www.top-rigid.com

BMP® 21 - PLUS LABEL PRINTERThe BMP21-PLUS portable label printer comes with smart automatic formatting, all you need to do is drop a label cartridge in, type and print. This printer also takes advan-tage of Brady’s reliable material offering. Wire makers, cable flags, all-purpose vinyl, self-laminating labels, nylon cloth.Text Sizes: 6 to 40 point font Max roll length: 21’ Color Capability: single color printing Display: LCD Power Supply: 6 alkaline AA batteries Print Resolution: 203 dpi Print Technology: Thermal transfer Includes M21-750-499 black on white label cartridge, lanyard and quick start guide.

BMP® 61 LABELING SYSTEMBrady's BMP®61 label printer is de-signed for quick and efficient identifica-tion of wires, cables and components. With high performance materials that can handle the toughest industrial identification applications, this printer is your rugged and reliable partner in the field and dependable workhorse in the shop. It features multiple user in-terfaces, touch screen capabilities and a variety of ways to connect, manage and save your data.

• Print Resolution: 300 dpi • Text Sizes: 0.05 in - 3.5 in • Includes printer, cleaning kit,

cutter cleaning tool, power cord, quick start guide, usb cable.

• Pass 2011/65/EU • Warranty: 1 year against

manufacturer’s defect

• Bar Code Type: Linear code 39, Code 128 auto and interleaved 2 of 5. 2D - QR code and PDF417

• Connectivity: Stand-alone, Ethernet, USB

• Color Capability : MultiColor • Max label width: 4 in. • Power Supply: 110V-220V • Dimensions: 11in H x 19in W x

14.25in D

SIGN & LABEL PRINTERS

FACILITY IDENTIFICATION SOFTWARE

MINIMARK™INDUSTRIAL LABEL PRINTERSCat. No. 52041• Compact, fast, & incredibly versatile.• Prints signs & labels up to 4” wide & 39”

long.• Tapes are available in a wide selection of

colors & 3 widths: 1.125”, 2.25” & 4”• Compact - only 8” W x 7”H x 10.25”D &

weighs only 4.85 pounds.• Prints on vinyl, polyester, banner paper

& die-cut labels.• Built-in cutter minimizes wastage.• Used with the MarkWare Label-Making

Software.

BBP™ 85

Instantly create your own signs & can print & edit at the same time. Print signs & labels 4” to 10” high Up to 4 colors on one sign. Oper-ates as a stand alone unit or with your PC. Hundreds of resident symbols, graphics & bar code plus 11 international operating language. Includes: Keyboard, parallel cable, USB cable.

BMP™ 71

BBP™ 31

BBP™ 12

The BMP71 Label Printer can help you make labels faster & more efficiently than before. It has a print speed of 1.5” per second. Whether you need 1/4” self-laminating wire marker labels or 2” wide vinyl pipe marker label. Package includes: - Black ribbon M71-R6000, White tape M71-31-423, Battery pack BMP71BP1610,AC charger, USB cable, Media holder Y886290, cleaning card, cleaning swab, cd & manual, carrying case.

SIGN & LABELPRINTER The BBP31 Sign & Label Printer has built-in apps for labeling applications including:Pipe Markers,Arc Flash Labels, RTK Chemical Labels (NFPA diamond, Color Bar or WHIMIS). The BBP31 Sign & Label printer can print on hundreds of different label supply parts to take on all different labeling needs of your facility. Label Size & Color Option: Prints on ½” to 4” Label widths 8 print ribbon colors 13 different materials in 16 different colors. BBP31 includes Printer, Power cord, USB cable, drivers CD, stylus, cleaning kit, cutter cleaning tool, quick start guide & documents holder.

The BBP12 Label Printer is a high spread print, an extended list of labeling options and a simple, user-friendly design, the BBP12 Label Printer packs a lot of punch into one compact tool. From gen-eral identification labels to wire markers and asset tracking la-bels, the BBP12 label printer gives you the versatility to print all your basic label types from one machine - saving costs, reducing downtime and simplify-ing your labeling. Bar code type: 2D and 1D(Linear). Connectivity options: Serial, USB 2.0, Network (Eth-ernet), USB host. Can print both continuous and die cut labels. Color Capability: Single Color Printing. Print Speed up to 4"/sec. Print Resolution: 300 dpi. Max La-bel Width: 4.4".

MARKWARE FACILITY IDENTIFICATION SOFTWARE

LABELMARK

Cat. No. 20700• Use your PC to quickly design profes-

sional-looking signs and labels and print directly to a Brady labeler (HandiMark, Globalmark, etc.)

• Use pre-formatted templates or custom-ize your own.

• Over 1,000 safety symbols & industrial pictograms included.

Cat. No. LM5PRFCD• Improves the label-making experience

for the electrical, industrial, aerospace, laboratory and telecom industries.

• Save time and print professional-looking labels faster and more efficiently

• It has built-in templates, wizards, fixed-text labels and free-form designs to easily create and print custom labels.

21 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

SIGN & LABEL PRINTERS

LOCKOUT / TAGOUT DEVICES

CIRCUIT BREAKER LOCKOUTS

MINIATURE CIRCUIT BREAKER LOCKOUTS

STOPOWER PLUG LOCKOUT

VALVE LOCKOUTSUNIVERSAL VALVE LOCKOUTLocks out all types of valves. Sold as sets which include cable attachment & blocking arm or as individual components.

GATE VALVE LOCKOUTLocks out gate valves. Comes in various diameters, 1”-10”. Adjustable model also available.

CABLE LOCKOUTS

BALL VALVE LOCKOUT

Can be used in a wide variety of applications - from locking out multiple disconnects & valves to securing unusual energy isolating devices that are difficult to lockout using conventional means. Portable and easy-to-use. Available models: All-purpose, mini, original, Prinzing economy lockout, Prinzing cable lockout kit or Prinzing chain lockout kit.

Brady standard ball valve-lockouts fit most valves up to 3”. Prinzing models fit valves from ½” to 8” diameter.

ALL PURPOSE CABLE LOCKOUT

BRADY STANDARD BALL VALVE LOCKOUTSPRINZING

PLUG LOCKOUTSPrevents electrical plugs from being accidentally plugged into an outlet. Available kinds: Prinz-ing 3-in-1, Brady plug lockout, Electrical/Pneumatic, Hubbell, Stopower.

HUBBELL PLUGOUT

OVERSIZE BREAKER LOCKOUT

Catalog No. 65329

120 SNAP-ON (SINGLE POLE)BREAKER LOCKOUTCatalog No. 65387

UNIVERSAL MULTI POLE BREAKER LOCKOUT

Catalog No. 66321

CLAMP-ON (NO-HOLE) BREAKER LOCKOUT

DESCRIPTIONCAT. NO.277 Volts480/600 Volts

6539665397

LOCKOUT CLEATS

DESCRIPTIONCAT. NO.277 Volts480/600 Volts

6540465406

Used in conjunction with clamp-on lockouts.

480-600V BREAKER LOCKOUTPerfect for locking out over-sized & irregularly-shaped switches. Self-adhesive back, no drilling required.

DESCRIPTIONCAT. NO.Breaker block kitRed blocking barGreen blocking barMounting rail, 4”Blocking bar holder

9089190892908935126451265

TIE BAR LOCKOUTCatalog No. 90853

PIN OUT WIDECatalog No. 90850

PIN OUT STANDARDCatalog No. 90844

PIN IN STANDARDCatalog No. 90847

LOCKOUT / TAGOUT

22www.top-rigid.com

LOCKOUT / TAGOUT

LOCKOUT TAGSHelps you comply with OSHA’s tag re-quirements. Comes in various mate-rials-heavy-duty polyester, economy polyester & cardstock. Choose from various designs. Self-laminating photo tags are also available. All tags come with nylon cable tie.

LOCKOUT HASPS

PADLOCKS

LABELED LOCKOUT HASPS IN VARIOUS COLORSSTEEL LOCKOUT HASP

CORROSION-RESISTANT LOCKOUT HASP NYLON LOCKOUT HASP

Allows up to six workers to lock out a single energy source. Available in various colors and materials (steel, aluminum, plastic, nylon, etc.).

BRADY ABUS SAFETY LOCKOUT PADLOCK

BRADY ABUS STEEL-TYPE PADLOCK

Compact & lightweight, with enhanced impact resistance. Superior tem-perature, chemical, & corrosion resistance. Non-conductive, non-sparking body. Available in 6 high-visibility colors. Ribbed design for easier gripping & handling. Colors available: Red, Blue, Green,Yellow, Orange & Black.

Made of reinforced laminated steel which withstand severe physical abuse & a hardened steel shackle difficult to cut. Body plates are individu-ally coated for superior rust protection. With colored bumpers supplied for identification & protection.Colors available: Orange,Yellow, Black, Blue, Red & Green.*All padlocks come keyed-different. Keyed-alike and master-keyed locks avail-able per customer order. Aluminum, brass and combination padlocks are also available.

ELECTRICAL LOCKOUT TOOLBOX

PERSONAL BREAKER LOCKOUT POUCH

LOCKOUT KITS, TOOLBOXES & STATIONSLockout kits, toolboxes & stations come with an assortment of lockout devices, padlocks and tags for all your lockout requirements. Choose from the many configurations, ranging from personal kits & toolboxes to large stations which can be used by a whole department.

10-LOCK BOARDLOCKOUT STATION

TRAINING MATERIALS & AWARENESS AIDS

SAFETY POSTERS

TRAINING VIDEOS & HANDBOOKS

Laminated posters on various safety topics are designed to provide con-tinuous reinforcement of your ongoing safety program. Concise, easy-to-under-stand explanations. 18” X 24”

Train employees to protect themselves with motivational videos & handbooks. Suitable for both new and experienced employees. Helps you comply with OSHA’s training requirements.

OTHER LOCKOUT PRODUCTS

BUTTON SAFETY COVER

AC SENSOR Cat No. 65269 WALL SWITCH LOCKOUT

Cat No. 104603 Cat No. 104602

LOCKOUT / TAGOUT DEVICES

23 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

4mm Dia. Stainless - Steel Hasp 1-3/4” x 5-1/4”

S431

PUSH BUTTON & ROTARY SWITCH COVER

1-1/2” Wide, 1-3/4” Tall Zenex Thermoplastic Body

1-1/2” Wide, 3” Tall Zenex Thermoplastic Body

1-1/2” Wide, 1-3/4” Tall Zenex Thermoplastic Body

410 Keyed Different 1-1/2” 410LT Keyed Different 3” 410KA Keyed Alike 1-1/2” 410KALT Keyed Alike, Extra Length Shackle 3” 410MK Master Keyed 1-1/2” 410KAMK Keyed Alike, Master Keyed 1-1/2” Available colors: Red,Yellow, Green, Blue, Black, Purple, Teal & Orange.

406 Keyed Different, Dielectric 406KA Keyed Alike 406MK Master Keyed 406KAMK Keyed Alike, Master Keyed 406AST Pack-One each of all eight colors. Keyed Different Available colors: Red,Yellow, Green, Blue, Black, Purple, Teal & Orange.

411 Keyed Different 411LT Keyed Different, Extra Length Shackle 411KA Keyed Alike 411KALT Keyed Alike, Extra Length Shackle 411MK Master Keyed 411KAMK Keyed Alike, Master Keyed 411AST Pack-One each of all eight colors. Keyed Different Available colors: Red, Yellow, Green, Blue, Black, Purple, Teal & Orange.

2-1/4” dia. x 3-1/4” with cord dia. up to 3/4” (Most 110 - & many 220-volt plugs).

3” dia. x 6” with cord dia. up to 3/4” (Most 220 - 550 volt plugs)

MASTER LOCK 410 SAFETY PADLOCKS

4mm Dia. Shackle Hasp Steel Hasp with red plastic handle 2-1/4” x 3”

S430

MASTER LOCK 411 BILINGUAL SAFETY PADLOCKS

MASTER LOCK 406 NON-CONDUCTIVE, NON-MAGNETIC, NON-SPARKING SAFETY PADLOCK

Model No.

Model No.

Model No.

410RED

406BLU

411BLU 411YLW 411LTTEAL

Removable Button & Switch Cover, clear base & cover allow visibility of nameplates & labels. Horseshoe-shaped retrofit base allows use with raised nameplates & off-center installation to accommodate rotary switch knobs. Accommodates button up to 2 “ (50mm) dia. & 1-3/4” (45mm) tall, Patent pending

Installed Button & Switch Cover, captured by the rotary or pushbutton switch bezel. Clear base & cover allow visibility of nameplates & labels. Accommodate buttons up to 1-9/16” (40mm) diameter & 1-3/4” (45mm) tall, Patent pending

S2151

S2153

MASTER HASPS

PLUG LOCKOUT

HEAVY DUTY STEEL

418 2-3/8” x 3-1/4” 419 2-3/8 “ x 6-5/8”

419418

420 421 416 417 AL0802 AL080

• Combines Multiple-person lockout & Tagout Identification.

• Features an easy-to-apply “snap-on” advantage with its sprint-loaded locking arm.

• Fits more lockout points than alternative rivet-hinge labeled lockout hasp.

• Anodized aluminum & stainless steel construction for combined corrosion resistant & strength.

• Complete with high visibility, re-usable, write-on safety labels (English, French & Spanish).

• Colors available: black, blue, green, red, purple & yellow.

MODEL 427 - LABELED SNAP-ON HASP

Master Lock Model # Description

420 Steel Jaw with vinyl coated handle 1-3/4” x 4-1/2”

421 Steel Jaw with vinyl coated handle 2-3/8” x 5”

416 Spark Resistant aluminum 1-1/2” x 4-3/8”

417 Spark Resistant aluminum 2” x 4-7/8”

AL0802 Tabbed Steel Jaw with vinyl coated handle 2-3/8” x 5”

AL080 Tabbed Steel Jaw with vinyl coated handle 1-3/4” x 4-1/2”

ROTATING ELECTRICAL PLUG LOCKOUTS

487488

LOCKOUT / TAGOUT DEVICES

24www.top-rigid.com

NYLON OVERSIZED PLUG & CONTROL COVER ROTATING GATE VALVE LOCKOUTS

UNIVERSAL WALL SWITCH COVER

PRESSURIZED GAS VALVE LOCKOUT

BALL VALVE

CABLE LOCKOUTS

OVERSIZED PLUG & HOIST CONTROL COVER

LOCKOUT POUCHES, KITS & STATIONS

The cinch sack offers broad application solutions. Insert PVC tubing (not available through Master Lock) to block access to hoist control buttons. Flexible & durable rip-stop nylon bag fits easily in safety tool boxes, lock out with up to 6 padlocks or hasp.

Locks Out Both Toggle & Decora Paddle Wall Switches Patented design assures switch Is kept on or off. hinges open for unobstructed normal operation of switch, includes English/Spanish & English/French labels.

Fits Pressurized Gas Valves Patented design works with valve guard in place, fits virtually all pressurized gas valve handles up to 3” dia., compact size easily stored when not being used. S3910 - 1” depth 1-5/8” stem opening

Available sizes: 453L- Large (7” dia. x 17” tall) 453XL- Extra Large (10” dia. x 26” tall) 453XXL- Extra Extra Large (14” dia. x 36” tall)

453L

WALL SWITCH COVER

496B

PERSONAL LOCKOUT POUCHES LOCKOUT STATIONPERSONAL ULTRA-DURABLE LOCKOUT KITSModel No.1456E410 Model No. 1456P410

Model No. 1483BP410Model No. 1484BP410

Model No. S1900VE410RED

Model No. 1457E410KA Model No. 1457VE3KA

Model No. 1457E1106KA

484

483

482

481

480

Surrounds the valve operating handle to protect against accidental valve

opening. Multiple workers can apply their lockout hasp or safety locks.

Master Lock Model # Description Depth Stem Opening

480 1” to 3” dia. valve handles 1-1/6” 3/4”

481 2” to 5” dia. valve handles 1-7/16” 1-1/2”

482 4” to 6.5” dia. valve handles 1-7/8” 2-1/2”

483 6” to 10” dia. valve handles 2-1/4” 3-1/2”

484 8” to 13” dia. valve handles 2-5/8” 4”

485 1 set of 480-484

S3068 SEAL TIGHT HANDLE-ON LOCKOUT

Metal device clamps tight on handle stop. Defies corrosive environments & temperatures -70 F over 350 F.

Master Lock Model # Description

3/16” (4mm) Diameter Cable

S806 6’ Adjustable cable lockout

S806CBL3 3’ Adjustable cable lockout

S806CBL15 15’ Adjustable cable lockout

25 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

LOCKOUT / TAGOUT DEVICESGATE VALVE

• Hydrophobic nature makes it ideal for outdoor applications

• Heavier & bonded to enhance strength & reduce linting

• Dimpled & perforated, single-ply sorbents

• MAXX means greater performance without the extra weight

SPC ™ OIL SORBENTS MADEWith MAXX

SPC PRODUCTSSORBENT PADS BATTLEMAT ™

MRO PLUS ™ • Absorbs all industrial liquids (water, petroleum & chemical-based fluids)

• Three-ply construction makes it stronger, more durable & reduces lint

• Perforated to help you use only what you need - reduce waste

• MRO100 15” X 19”• MRO30DP 30” x 150”• MR15DP 15” X 150”

• BattleMat is as tough as it looks, featuring an industrial camouflage & a heavy duty approach to cleaning up spills

• The HT series has a gray coverstock to mask spills & includes an economical 300 foot roll

• The entire collection features: • A tough, universal three-ply

construction - perfect for use as a mat in high traffic areas

STATIC RESISTANT (SR) OIL SORBENTS • Treated to resist static electricity build

up • Oil only so they do not absorb water -

perfect for outdoor use • Single ply • Meets National Fire Protection As-

sociation (NFPA) specifications

• Specially developed chemical & acid sorbent.

• Yellow color-coded for safety and easy separation of hazardous waste.

• Heavy-weight pad. • Does not react with aggressive fluids. • Perfed every 15” and up the center. • Absorbency: 40 gal/bale.• Size 30” x 150’. • Single ply technology. • Shipping weight: 26.5 lbs.

• Chemically inert making it ideal for use with aggressive fluids

• Three-ply construction makes it stronger, more durable & reduces lint

• Perforated to help you use only what you need - reduces waste

• The product’ s green color indicates that it is intended for use on hazard-ous materials

• UN1113 12” x 12” • UN1019 15” x 150”

ENV ™ - MAXX ENHANCED • Oil only sorbent equally effective on land or water

• Repels water & floats indefinitely - even when saturated

• Efficient single-ply construction• MAXX means greater performance

without the extra weight • ENV100 15” X 19”

UXT ™ • High performance, all-purpose sorbent made to handle virtually any liquid (water, petroleum & chemical-based)

• Spunbond on both sides offers: • Maximum durability & very low

linting • Perforated to help you use only what

you need - reduces waste• UXT15P 15” X 150” • UXT100 15” X 19”

SXT ™ • High performance, oil only sorbent made to handle petroleum-based spills

• Remains intact even when saturated • Spunbond coverstock on both sides

offers: • Maximum durability & very low

linting • Both abrasion resistant and non-

abrasive performance • Perforated to help you use only what

you need - reduces waste

MAXX ENHANCED GP ™ • Universal in nature so it absorbs

basically all fluids (water, petroleum & chemical-based)

• Efficient single-ply construction • Made with MAXX: greater perfor-

mance without the extra weight!

• MAXX means greater performance without the extra weight

• Color-coded yellow for safety & easy separation of hazardous waste

• Product will not react with aggressive fluids

• MAXX Chemical, CH100 15” x 19”

MAXX CHEMICAL

SPC ™ MAXX CHEMICAL ROLL 30” x 150’, CH30DP

• Absorbs petroleum-based oils, solvents & other non-water soluble liquids

• Dimpled & perforated to help you use only what you need - reduces waste

• Multi-ply, heavyweight quality you can count on day in and day out

• OP350DP 30” x 150”

OIL PLUS ™

UNIVERSAL PLUS ™

26www.top-rigid.com

SORBENT SOCS

PORTABLE SPILL KITS

MATS & RUGSMULTIWIK ™

ALLWIK®

HAZWIK®

OIL ONLY

COBRA COIL ™

SLIKWIK®

Universal economy SOC Not for use with aggressive fluids Wringable & incinerable

All-purpose polypropylene SOC Suit-able for most industrial applications Wringable & incinerableAW124 3” x 12’ AW412 3” x 4’

Polypropylene SOC ideal for chemi-cal clean up. Color-coded green for safety Wringable & incinerable HAZ124 3” x 12’ HAZ412 3” x 4’

Specialized oil-only polypropylene SOC Will not absorb water, or water-base solution, Wringable & incinerable OIL124 3” x 12’ OIL412 3” x 4’ OIL806 3” x 8’

Excellent diking SOC filled with a granular absorbent, Suitable for most fluids CC440V 3” x 4’

Corncob-filled SOC, Exceptional value for picking up of all but aggressive fluids

TRACKMAT™

RAG RUG

• Three-ply construction features: • Extremely strong & durable, UV-

resistant top layer • Highly absorbent polypropylene

core • Non-leaking, non-slip barrier

backing • Available in pads and rolls,TrackMat™

is still considered the most absorbent barrier mat available

• TM58 58” x 80’

• Economy rug made from recycled cotton and polyester fibers

• Provides good footing, masks dirt & absorbs spills

• Soaks up oil, water-based & solvent-based liquids

• Ideal for maintenance, repair & industrial environments

SORBENT INDUSTRIAL RUG (SIR™) • Made of durable, needle-punched

polypropylene fibers • Eliminates slippery areas & unsightly

tracking between the plant & office areas

• Can stand up to most aggressive fluids

• Gray color masks drips and spills SIR36 36” x 300’

• SIR72 72” x 150’

BARRIER SPILL MATTING(BSM™) • Industrial rug made from needle

-punched polypropylene • Non-slip backing sticks to the floor &

prevents fluids from leaking through to the floor

• Absorbs water, oil or chemicals • BSM100 36” x 100’ • BSM3650 36” x 50’

ATTACK PAC ™ ECONOMY SPILL KIT ™ EMERGENCY RESPONSE KIT

Efficient, space saving, single use kit, packed in puncture & UV resistant foil bag (includes grommet for hanging). Absorbs

up to 7 gallons per kit. Available in: Allwik SKA-ATK

Hazwik SKH-ATK Oil Only SKO-ATK

Highly visible yellow PVC bag is “just right” for small spills. The right price, the right size & the right value. Absorbs up to 5

gallons per kit. Available in: Allwik SKA-PP

Hazwik SKH-PP Oil Only SKO-PP

The value of this kit is as clear as the front of the bag. Quickly assess the sorbents

you have, throw the kit over your shoulder & respond to the spill. Absorbs up to 15

gallons per kit. Available in: Allwik SKA-CFB

Hazwik SKH-CFB Oil Only SKO-CFB

SPC PRODUCTS

27 TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

SC-SD2 26” x 52” x 6” 21.2 gallons 2,500 lbs 30.79 lbs

SPILLDECK, 2 DRUM

SPC PRODUCTSMARINE SORBENTS

DECKS & PALLETS

Premium SPC ™ booms are lint free & easy to handle, Economical ENV ™ booms feature a lint-free blue sleeve.SPC810 8” x 10’ SPC510 5” x 10’ SPC5510 5” x 10’ SPC818 8” x 18’ ENV810 8” x 10’ ENV510 5” x 10’

Extremely accessible spill kit in a reusable bucket. For small response. Absorbs up to 9 gallons per kit.

Large & Extra Large polyethylene bins are chemical & water resistant. Wheel mounted for maximum mobility, spill trucks provide highest level of readiness.

BOOMS 6.5 GALLON SPILLBUCKET

Size 36”H x 18”D x 38-3/8”W. Color yellow. Shipping weight 180 lbs.

SPC SPILL CONTROL CART SC-CART

• Flat, chemical-resistant filaments in half-pound units

• Float in water and entrap heavy oil • Can be re-used after draining or

dousing with #1 or #2 weight oils • Extracted oil can be recycled or

downgraded as fuel oil • Use the Drag Net as a sweep be-

tween two boats or deployed along a shoreline

OIL NETS™ / DRAG NETS™

SPC1900 19” x 100’, 1/bale Durable blue cover stock for extra strength

SWEEP

CB612 6” Float, 12” Skirt, 100’ sections

CB305 3” Float, 4.5” Skirt, 25’ sections

CONTRACTOR BOOM

BANTAM BOOM

SC-DP2 26” x 52” x 17” 68.70 gallon 2,500 lbs 46.4 lbs

SPILL PALLET, 2 DRUM

SC-DP4 52” x 52” x 17” 1 28.9 gallon 5,000 lbs 88.54 lbs

SPILL PALLET, 4 DRUM

SC-DPR 32.5” x 70” 650 lbs 47.5 lbs RAMP

PS500 20” x 20”PRIMASORB PALLET PAD

MATS & RUGS

MOBILE SPILL KITS

UN approved water & chemical resistant polyethylene Lab Pack container with screw top lid for small to medium response. Absorbs up to 15 gallons per kit.

20 GALLON LAB PACK

Open & close this lever locked 55 gallon drum for fast response. Drum meets UN specifications. For medium spill response. Absorbs up to 38 gallons per kit.

55 GALLON DRUM

Tough, secure and highly visible, this top quality screw topped overpack drum meets UN & DOT specifications. For larger spill response. Absorbs up to 75 gallons per kit.

95 GALLON OVERPACK

Oil Only SKO-LT Allwik SKA-LT

Hazwik SKH-LT Marine SKM-LT

LARGE SPILL TRUCKOil Only SKO-XLT Allwik SKA-XLT

Hazwik SKH-XLT Marine SKM-XLT

EXTRA LARGE SPILL TRUCK

Mobile, compact Emergency Spill Kit is for fast spill response or mainte-nance mess prevention anywhere in the plant. (Size: 18” Lx 17” W x 39” H). Absorbs up to 22 gallons per kit. Available in:Hazwik SKH-K2 Oil Only SKO-K2 Universal SKA-K2

SPILL KADDIE

28www.top-rigid.com

Absorbency capacity: 70 gallons. Size 4’L x 4’W x 8”H. Shipping weight 6 lbs.

BRADY SPC LIGHTWEIGHT PORTABLE SPILL BERM, SB-SL44

SPC & FALL PROTECTION• Great for absorbing spills & leaking fluids in tight spaces

• Oil only pillows are ideal for use in waste troughs, coolant tanks, fluid reservoirs & sump wells

• Allwik® pillows absorb all oil & water-based fluids

• Hazwik® pillows are color-coded green to indicate their use with hazardous materials

• AW1818 18” x 18” Allwik • OIL99 10” x 10” Oil Only

PILLOWSALSO AVAILABLE

CANSORB ™• Organic, oil only absorbent made

from high quality large fiber sphag-num Peat Moss

• Absorbs 8x its weight in fluids

BODY PROTECTION SPC & OTHER PRODUCTS

29

FLOOD BARRIERWater activated, self-inflating, sand-less sandbag

TAPES

BRADY FLOOR MARKING TAPES

BARRICADE TAPES ANTI-SKID TAPES

WARNING TAPES

First Aid Kits are available for 10, 25, & 50 persons. Comes in metal casing. Please inquire at our office for various medical equipment.

FIRST AID KITS & MEDICAL EQUIPMENT

SPC PRODUCTS

OTHER PRODUCTS

TOP-RIGID INDUSTRIAL SAFETY SUPPLY, INC. / Product Catalogue

Green-colored heavy duty knitted polyethylene with reinforced border with grommets, flexible, durable, UV treated, high density polyethylene.

SAFETY NET WITH GROMMETS

Oil Gator is an all-natural, biodegradable absorbent with the ability to encapsulate 2-6 times its weight in oil or oil-based products. It is a recycled waste product that con-tains naturally occurring microorganisms and nutrients. No harm will ever be done to the environment by the use of Oil Gator.

OIL GATOR GS-10 LOOSE GRANULAR

The acid neutralizer is used to solidify a wide range of base spills. Polymers will neutralize and change color to let you know neutraliza-tion has taken place. 2 lb. shaker bottle. Color purple. Pass 2011/65/EU.

ACID NEUTRALIZERSPC-ACID

The base neutralizer is used to solidify a wide range of base spills. Polymers will neutralize and change color to let you know neutraliza-tion has taken place. 2lb shaker bottle.

BASE NEUTRALIZERSPC-BASE

• Sound Level Meters• Fire Extinguishers • Back Support Belts • Life Jackets & Buoys • Safety Signs & Stickers • Traffic Cones • Megaphone • Fire Hoses and Cabinets

ALSO AVAILABLE

Back Support Belts

OTHER PRODUCTS

30

OTHER PRODUCTS

Eflare provides for a quick and easy method to enhance safety by creating a highly visible warning or safety zone. It uses an urgent flash rate, high luminosity LEDs and a patented fresnel lens that is visible for more than 1 kilo-meter. Has a flash or steady on function. Body color: Yellow. LED colour options: Red, Amber, Blue, Green, White. Candela: 25-80. No of LEDs: 8. Flash rate: 165-185 fpm. Battery type: D Cell x 2 (not included), Alkaline. Battery life: 40 hours at peak brightness Weight: 450g inc batteries. Height: 20 cm .Low Battery Indicator @ 20% battery life.

EFLARE AT700 BEACON LIGHT

Eflare provides for a quick and easy method to enhance safety by creating a highly visible warning or safety zone. It uses an urgent flash rate, high luminosity LEDs and a patented fresnel lens that is visible for more than 1 kilometer. Compact and light, easy to carry and stow, operates for up to 50 hrs at peak bright-ness on 2 alkaline size D cell batteries. Twist lens to turn on and off. Impact resistant body and cap, shatterproof, gasproof and waterproof lens. HAZMAT accredited for use in Class 1, Divi-sion 2 /Zone 2 hazardous areas. Flashing 2 color beacon: blue/white, red/amber, red/white and amber/white.

EFLARE AT730 BEACON LIGHT

Illuminated Single or double-faced; 220VAC.

EXIT LIGHTS

N35 (Explosion proof)

904

US-made, industrial flashlights available in various models, each with different features. Please inquire at our office for descriptions.

FULTON FLASHLIGHTS

Hard plastic material. 21” total length including handle.

TRAFFIC BATON

With lemon yellow lamp; LED light; 3V DC; battery oper-ated, 4 x 1.5V (not included); 80 flashes/minute; around 700 hours.

WARNING HAZARD LAMP

Equipped with full automatic charge & discharge functions;

with dual reflector & adjustable light; handy and lightweight; 220V.

EMERGENCY LIGHT

www.top-rigid.com

EFLARE APPLICATIONS

EFLARE ACCESSORIES:

Eflare Magnetic Base Mount Eflare Rubber Base Mount

IKlever X-change safety cutters with replaceable safety blade, easy release button, ergonomic comfort fit handle. Available in blue, yellow, orange and red. Packing: 12 pcs. per box. Replacement heads also available.

KLEVER X-CHANGE KCJ-XC SAFETY CUTTERS, REGULAR HEAD WITH METAL TAPE SPLIT-TER,