“WE TAKE CARE OF THE GEAR THAT TAKES CARE OF YOU!”

Groves Incorporated www.ReadyRack.com

“WE TAKE CARE OF THE GEAR THAT TAKES

CARE OF YOU!”

Ready Rack® units can be CUSTOM QUOTED to fit your application. 1

Ready Rack's corporate headquarters are located in Woodstock, IL. There we inventory, assemble, and package the various components that make up our products for shipment to our customers. Groves Incorporated partners with manufacturers in the United States and around the world. By using multiple sources, we are able to get the most competitive pricing for our customers, while maintaining the highest quality.

When you purchase a Ready Rack system through our nationwide fire service distribution network, you are supporting firefighters who often work second jobs as expert sales consultants. Our business plan allows these heroes to earn extra money to support their families and provides you with real hands-on product knowledge.

Designed & Sold by Firefighters through Distributors Nationwide!

Visit www.ReadyRack.com to use our wall space calculator.

The Original

TURNOUT GEAR STORAGE SYSTEM

Phone: 800.991.2120 • Fax: 815.338.8640 • www.ReadyRack.com 2

The Red Rack Advantage!

Structurally superior design does not require rear grid.

• Red Rack is designed to stand up to the rugged demands of the Fire Service.

• Tubular steel design is the strongest configuration on the market and does not require a rear grid.

• SAFER! Open back design allows easy access to your station's building code approved electrical outlets.

• Easier to install! Design does not obstruct switches or outlets.

• Maintenance friendly! Clean or paint walls without removing the rack.

Designed for maximum air circulation, Red Rack™ and Dry Kwik accessories help PPE and gear dry faster and last longer. Our system creates maximum organization which helps shave precious extra seconds off your response times; helping you serve your community better!

All Red Rack™ Storage systems include adjustable boot & helmet shelves, hanging pole, adjustable apparel hooks, label holder for name plate and heavy-duty powder coat finish.

Red Rack™ products are available in custom colors, with extended lead times, upon request. Additional fees may apply.

Red Rack™


Wall Mounted Red Rack™Available in 18", 20" or 24" wide sections, units are 20" deep and 72" tall. Red Racks can be ordered in virtually any wall run length thanks to our exclusive modular design.

Wall Spacers Wall spacers allow Red Racks to be mounted away from wall (2" or 6") to install on walls where exposed conduit or piping are pre-existing obstacles.

*Security option includes top security shelf and lockable door.

Shown with Security Option

Model# Descriptions

WS-2Includes one 2" wall spacer & one 6" floor support

WS-6Includes one 6" wall spacer & one 6" floor support

Model# Length Model# Length Model# LengthRRWM-1/18 19.75" RRWM-1/20 21.75" RRWM-1/24 25.75"RRWM-2/18 38.50" RRWM-2/20 42.50" RRWM-2/24 50.50"RRWM-3/18 57.25" RRWM-3/20 63.25" RRWM-3/24 75.25"RRWM-4/18 76.00" RRWM-4/20 84.00" RRWM-4/24 100.00"RRWM-5/18 94.75" RRWM-5/20 104.75" RRWM-5/24 124.75"RRWM-6/18 113.50" RRWM-6/20 125.50" RRWM-6/24 149.50"RRWM-7/18 132.25" RRWM-7/20 146.25" RRWM-7/24 174.25"RRWM-8/18 151.00" RRWM-8/20 167.00" RRWM-8/24 199.00"RRWM-9/18 169.75" RRWM-9/20 187.75" RRWM-9/24 223.75"RRWM-10/18 188.50" RRWM-10/20 208.50" RRWM-10/24 248.50"RRWM-11/18 207.25" RRWM-11/20 229.25" RRWM-11/24 273.25"RRWM-12/18 226.00" RRWM-12/20 250.00" RRWM-12/24 298.00"RRWM-13/18 244.75" RRWM-13/20 270.75" RRWM-13/24 322.75"RRWM-14/18 263.50" RRWM-14/20 291.50" RRWM-14/24 347.50"RRWM-15/18 282.25" RRWM-15/20 312.25" RRWM-15/24 372.25"SEC-18/WM *see note SEC-20/WM *see note SEC-24/WM *see note

Wall Mounted Red Rack™


Units are supplied with four 5" swivel casters, two with foot operated brakes.

Double Sided Units

*Security option includes top security shelf, rear security panel and lockable door.


*Shown with security option

Model# Length Model# Length Model# LengthRMDS-6/18 57.25" RMDS-4/20 42.50" RMDS-4/24 50.50"RMDS-8/18 76.00" RMDS-6/20 63.25" RMDS-6/24 75.25"RMDS-6/18SEC* 57.25" RMDS-4/20SEC* 42.50" RMDS-4/24SEC* 50.50"RMDS-8/18SEC* 76.00" RMDS-6/20SEC* 63.25" RMDS-6/24SEC* 75.25"

Single Sided Units

Model #RMSS-3/24 Model #RMDS-6/24SEC Model #RMDS-6/24

Model# Length Model# Length Model# LengthRMSS-2/18 38.50" RMSS-2/20 42.50" RMSS-2/24 50.50"RMSS-3/18 57.25" RMSS-3/20 63.50" RMSS-3/24 75.25"RMSS-4/18 76.00"RMSS-2/18SEC* 38.50" RMSS-2/20SEC* 42.50" RMSS-2/24SEC* 50.50"RMSS-3/18SEC* 57.25" RMSS-3/20SEC* 63.50" RMSS-3/24SEC* 75.25"RMSS-4/18SEC* 76.00"

Mobile Red Rack™


Single Sided Units

Double Sided Units

*Security option includes top security shelf, rear security panel and lockable door.


Freestanding Red Rack™Units are supplied with heavy-duty legs, keeping the rack elevated above the floor for easy cleaning underneath.

Single Sided Freestanding Red Racks can be connected to create the desired number of compartments.

Model# Length Model# Length Model# LengthRFSS-2/18 38.50" RFSS-2/20 42.50" RFSS-2/24 50.50"RFSS-3/18 57.25" RFSS-3/20 63.25" RFSS-3/24 75.25"RFSS-4/18 76.00" RFSS-5/20 104.75" RFSS-5/24 124.75"RFSS-6/18 113.50" RFSS-6/20 125.50" RFSS-6/24 149.50"RFSS-10/18 188.50" RFSS-10/20 208.50" RFSS-10/24 248.50"RFSS-15/18 282.25" RFSS-15/20 312.25" RFSS-15/24 372.25"SEC-18/FS* *see note SEC-20/FS *see note SEC-24/FS* *see note

Model# Length Model# Length Model# LengthRFDS-6/18 57.25" RFDS-4/20 42.50" RFDS-4/24 50.50"RFDS-8/18 76.00" RFDS-6/20 63.25" RFDS-6/24 75.25"RFDS-6/18SEC* 57.25" RFDS-4/20SEC* 42.50" RFDS-4/24SEC* 50.50"RFDS-8/18SEC* 76.00" RFDS-6/20SEC* 63.25" RFDS-6/24SEC* 75.25"

Freestanding Red Rack™


Hanging Apparel HooksModel#: BPHIdeal for drying bunker pants or storing mask bags and loose equipment.

Metal Label HolderModel #: MLHEngraved Name Plate for MLHModel#: MLH-E

MLH

LAB

MLH-E

LAB-E

Plastic Label HolderModel #: LABEngraved Name Plate for LABModel#: LAB-E

Flat Dry HangerModel#: FDHWith 1" drop to accommodate coat and bunker pants. Surplus gear storage.

Dry Kwik Coat HangerModel#: DKH-OModel#: DKH-COpens shoulders and front of coat permitting inside air circulation. Available with open and closed loop.

Proximity Pant HangerModel #: PPH-1212" wide solid steel hanger with two pant attachment straps. Stores pants while conforming to NFPD regulations by hanging them upright and not folding them.

Model#: RD-18for 18" sections Model#: RD-20for 20" sectionsModel#: RD-24for 24" sections

Model#: STK

Top Security Shelfalso used as an additional storage shelf for non-secure unitsModel#: SS-1818" wide shelf Model#: SS-2020" wide shelfModel#: SS-2424" wide shelf

Rear Security Panel

Model# SP-18 for 18" sections Model# SP-20 for 20" sections Model# SP-24 for 24"sections

Security Door

Security Conversion Kit

Metal drilling guide for retrofitting security doors to existing Red Rack systems.

Glove Dry HangerModel#: GDHAccommodates one pair of gloves or one hood.Personal Property Box

Model#: PPB or PPB-RProvides secure storage for keys, pagers and other personal items. Includes mounting hardware.

AVAILABLE IN BLACK & RED!

Helmet HolderModel#: HHRelieves pressure from ratchet band and allows interior parts to dry out fast. Helmet parts last longer.

Accessories


Gear Guard• White 8 oz. PVC laminate UV shield that is

abrasion/tear resistant and fluid proof.• The easily cleanable laminate is anti-microbial,

self-deodorizing and stain resistant.• Laminate also has anti-static properties

and is flame retardant.• Thread is constructed of heavy-duty UV

resistant polyester.• Heavy-duty, long lasting #5 molded plastic

zippers aid in the easy opening of the compartment sections.

• Gear Guard covers are available for all Red Rack Wall Mounted, Freestanding and Mobile units, with custom sizing available.

Model# Description

GGR-WM-S(Specify 18", 20" OR 24") Starter Unit for Wall Mounted Red Rack

GGR-WM-A(Specify 18", 20" OR 24") Add on Unit for Wall Mounted Red Rack

Example: For a cart cover for RRWM-10/20, you would order 1 each GGR-WM-S20 and 9 each GGR-WM-A20

Model# Description

GGR-FSS-S(Specify 18", 20" OR 24") Starter Unit for Single Sided Freestanding Red Rack

GGR-FSS-A(Specify 18", 20" OR 24") Add on Unit for Single Sided Freestanding Red Rack

Example: For a cart cover for RFSS-10/20, you would order 1 each GGR-FSS-S20 and 9 each GGR-FSS-A20

Model# Description

GGR-MSS-2/18 Cover for RMSS-2/18







Model# Description

GGR-MDS-6/18 Cover for RMDS-6/18 or RFDS-6/18






One GGR-WM-SOne GGR-WM-Ashown closed

GGR-MSS-2/24 shown open

Wall Mounted Red Rack™

Mobile Single Sided Red Rack™

Freestanding Red Rack™

Mobile or Freestanding Double Sided Red Rack™


Designed for chemical suits and wet and dry dive gear.• Naturally air dries suits and gear.• Accepts all suit styles and sizes.• Durable steel construction.• Tough epoxy powdercoat finish.• Corrosion resistant.• Economically priced.

• Provides a stable base to prepare gear and remove gear after a call.

• Freestanding bench will not take up valuable space inside of the compartment or compromise the structural integrity of the gear rack.

• Steel legs with heavy-duty powder coat finish. • Top is constructed of hardwood butcher block

with a clear stain to provide wear resistance. • Ships knocked down to reduce shipping costs.

Model# DescriptionRRB-48 48"L x 9-1/2"W x 17"H

• Organized storage for back boards while not in use.• Holds up to eight boards at one time.• Available wall mounted or mobile with heavy-duty casters.• For use in fire departments, rescue squads and hospitals.

Model# Type Description

BBR-WM Wall Mount 20" L x 20" W x 72" H

BBR-M Mobile 20" L x 20" W x 78" H

Model# Description

GDS 30" L x 15" W x 8" H – collapsed

Personal ProtectiveEquipment Drying Stand

Ready Rack Bench

Back Board Rack


Ready Rack® is available in a wide range of models, New Tech Wall Mounted, Freestanding and Mobile. Choose from standard units, or customize the installation to fit your station's wall or floor space.

Ready Rack® components are manufactured with a durable, heavy-duty zinc chromate finish and protected with a special clear-coat sealer. All units are supplied with two levels of open wire shelving. Full length grid dividers separate individual sections between top and bottom shelf levels and provide a 4" tall divider on the top shelf level. Grid dividers are also supplied for ends of the unit. Each individual section is supplied with two hanging apparel hooks, one snap on plastic name plate, and a hanging pole that runs the length of the unit.

Model# LengthNTWM-2/18 36"NTWM-3/18 54" NTWM-4/18 72" NTWM-5/18 90" NTWM-6/18 108" NTWM-7/18 126" NTWM-8/18 144" NTWM-9/18 162" NTWM-10/18 180" NTWM-12/18 216" NTWM-14/18 252" NTWM-15/18 270" NTWM-16/18 288" NTWM-18/18 324"NTWM-20/18 360" NTWM-24/18 432" NTWM-25/18 450" NTWM-30/18 540"

18" Wide Sections 24" Wide Sections

Wall Mounted Ready Rack®

Visit www.ReadyRack.com to use our wall space calculator.

Available in 18" wide or 24" wide sections, units are 21" deep and 78" tall. Ready Racks can be ordered in virtually any wall run length.

Model# LengthNTWM-3/24 72"NTWM-4/24 96" NTWM-5/24 120" NTWM-6/24 144" NTWM-8/24 192" NTWM-10/24 240" NTWM-12/24 288" NTWM-15/24 360" NTWM-20/24 480" NTWM-24/24 576"

New Tech Wall Mounted Ready Rack

Ready Rack®


Model# Length

FSS-3/18 54"

FSS-10/18 180"

FSS-24/18 432"

Model# Length

FSS-3/24 72"

FSS-10/24 240"

FSS-24/24 576"

Freestanding Single Sided 18" wide sections21" deep x 74" tall x length specified

Model# Length

FDS-8/18 72"

FDS-20/18 180"

FDS-40/18 360"

Model# Length

FDS-6/24 72"

FDS-18/24 216"

FDS-30/24 360"

Freestanding Single Sided 24" wide sections21" deep x 74" tall x length specified

• Available in 18" wide or 24" wide sections, units are 21" deep and 78" high.

• 74" tall posts with leveling bolts for use on uneven floors.• Single Sided units have 4" tall back ledges.• Freestanding Ready Racks can be ordered in virtually

any length.

Freestanding Double Sided 18" wide sections36" deep x 74" tall x length specified

Freestanding Double Sided 24" wide sections36" deep x 74" tall x length specified

Freestanding Ready Rack®


Model# Model# LengthMSS-3-RED MSS-3-BLK Three sections, 24" per sectionMSS-4-RED MSS-4-BLK Four sections, 18" per sectionMSS-5-RED MSS-5-BLK Five sections, 14" per sectionMSS-6-RED MSS-6-BLK Six sections, 12" per section

MOBILE SINGLE SIDED READY RACK® IS NOW AVAILABLE IN DURABLE RED OR BLACK POWDER COAT FINISH!

Specify RED or BLK when ordering

Model# LengthMSS-3 Three sections - 24" per sectionMSS-4 Four sections - 18" per sectionMSS-5 Five sections - 14" per sectionMSS-6 Six sections - 12" per section

Mobile Single Sided Ready Rack® - 72" L x 21" D x 79" H

Units are 79" High, including four 5" swivel casters, two with foot operated brakes. 4" tall back ledge prevents helmets from being pushed off shelf.

Mobile Single Sided Ready Rack®


Rack stores sixteen sets of bunker pants and turnout coats on sixteen Flat Dry hangers with one inch drop.


SGF Freestanding Unit 72" L x 21" D x 74" H

SGM Mobile Unit 72" L x 21" D x 79" H

Rack dries four complete sets of gear. Unit is supplied with eight Dry Kwik coat hangers, eight Glove Dry hangers and eight hanging apparel hooks.


DPF Freestanding Unit 72" L x 21" D x 74" H

DPM Mobile Unit 72" L x 21" D x 79" H

Mobile Double Sided Units - 72" L x 36" D x 79" H

Also available in red or black.

Also available in red or black.

Model# Length

MDS-6 Six sections - 24" per section

MDS-8 Eight sections - 18" per section

MDS-10 Ten sections - 14" per section

MDS-12 Twelve sections - 12" per section

Mobile Double Sided Ready Rack®

Surplus GearStorage Rack

Air Dry Laundry Rack


PPE & Hose Dryer

Hose Drying Rack

• Custom built for firefighter turnout gear (PPE) and hose.• Simple controls with factory preset temperatures ensure

proper drying temperature for each unique clothing or turnout item.

• Made from heavy-duty steel construction with a white powder coat finish.

• Standard accessories include: (4) PPE hangers, (2) boot hangers, (1) glove rack which holds 26 gloves.

• Additional accessories available.

• Designed to be used with our PPE & Hose Dryer. Heavy- duty steel construction with a durable red powder coat finish. Can hold 900' of 1-1/2" or 1-3/4" hose.

PPE & Hose Dryer 55.10" L x 29.80" W x 80.05" HModel# Description

PPEHD PPE / Hose Dryer

AFCH Air Flow Coat Hanger

AFBH Air Flow Boot Hanger

AFGH Air Flow Glove Hanger

Model# Description

MHD-42 42" L x 24" W x 57" H

Shown with optional MHD-42

PPEHD

MHD-42

AFBH

AFCH AFGH

Made in U.S.A.

Made in U.S.A.


Hose Washer

• Heavy gauge stainless steel construction.• Easy one person operation - no pedals to hold down.• Automatically feeding drive motor powers the washer brushes and exit squeegees.• Water boost pump pressurizes standard garden hose to 300 psi for powerful cleaning.• Two adjustable high pressure soap injectors.• Two 10" nylon scrub brushes provide a deep and thorough scrubbing.• Ten high pressure rinse injectors. • Two 12" polymer disks with nylon rollers move the hose through smoothly.• Faster cleaning time - speed of 25 ft/min; wash and rinse in one process.• Compact design - only 46" L x 24" W x 40" H.• Mobile heavy-duty 4" casters. • Cleans hoses up to 4" in diameter.• Shut off water valve at machine.• Power - 220V-20amp (110V-30amp option available).• Water drain - 6' flexible drain line from bottom of cabinet.• Removable rear panel for easy access to components for service or maintenance.• Made in USA.

Model# DescriptionRRHW 46" L x 24" W x 40" H

Made in U.S.A.


Mobile Hose DryerWith the Mobile Hose Dryer/Hose Tower, equipment dries naturally and quickly with fresh air, prolonging the life of your equipment. Use to dry immersion entry suits, wet or dry dive gear and decontaminated hazmat entry suits. Optional hangers hold turnouts, rope, webbing, slings, salvage covers and more. Holds up to 1200' of 1-1/2" - 1-3/4" or up to 800' of 2-1/2" - 3" hose.

Other benefits include:• SAFE - No more climbing to hang or retrieve hoses.• Costs thousands less than conventionally built towers.• Stores and dries in small area.• Durable red powder coated finish.• Can be used with our Hose Winder (HW-1 see page 18).

With the Dry and Store Hose Rack, you can dry hose and store it on the same unit. Unit consists of the top mounted drying rack where hose and other equipment dries naturally and quickly, and one lower level storage rack. Dry up to 900' of 1-1/2" - 1-3/4" hose or up to 600' of 2-1/2" - 3" hose and simultaneously store up to 650' of 2-1/2" hose. Heavy-duty steel construction with durable red powder coat finish. Can be used with our Hose Winder (HW-1 see page 18). Ideal for use in smaller stations.

Model# DescriptionDSHR 80" L x 33" W x 88" H

Model# DescriptionMHD-80 80" L x 33" W x 88" H

Made in U.S.A.

Made in U.S.A.Dry and Store Hose Rack


Mobile Hose Cart• Four heavy-duty brake casters allow for ease of rolling

and hold the cart in place when loading or unloading.• Heavy-duty steel rails with a durable red powder coat

finish easily support 100' coils.• Ships knocked down for freight savings.• Easy to assemble.• Available in two tier or three tier units.• Stationary units also available in both two and three tier.

Deduct 5" from overall height of unit.

Model# Description Dimensions

HC-64-2T Two tier holds up to 1300' of 2-1/2" hose 72" L x 34" W x 79" H

HC-96-2T Two tier holds up to 2000' of 2-1/2" hose 104" L x 34" W x 79"

HC-64-3T Three tier holds up to 2000' of 2-1/2" hose 72" L x 34" W x 87" H

HC-96-3T Three tier holds up to 3000' of 2-1/2" hose 104" L x 34" W x 87" H

CP-31 Cover Plate 20" x 31"

Made in U.S.A.

• An optional 20" x 31" cover plate provides a flat surface for holding bottle carriers or other items.

• Total weight capacity 4,400 lbs.• Can be used with Hose Winder model

HW-1. (see page 18)

HC-96-3T HC-64-2T shown with Collapsible Bottle Carrier BC-8 (see page 24) and CP-31 Cover Plate


Large Diameter Hose WinderWind 100-foot sections of large diameter hose up to 6" wide in seconds. Having the ability to steer the winder while rolling the hose, the LDHW turns winding into a one-man operation. With no need to recharge batteries, downtime is drastically reduced.The LDHW drains the hose as you wind it, prolonging hose life.Reduces the risk of back injuries by limiting firefighter fatigue.

Model# DimensionsLDHW 48" L x 36" W x 49" HModel# DescriptionLDHW-TM Trailer Hitch Mount

Made in U.S.A.


Hose Winder

Tilting Hose Turntable

• Fits Mobile Hose Dryer (MHD-80), Dry and Store Hose Rack (DSHR), and all models of Mobile Hose Carts.

• For 1" to 4" Hose.• Wind tight coils or donuts.• Roller guide removes air and water as you roll on

small diameter hoses.• Save time and manpower with one person operation.• Optional trailer hitch mount for truck.• When not in use, winder collapses to less than 6" deep.• Fits racks with 2-1/2" square tube frame.• Easy mounting to Hose Rack and Hose Tower.

• 27" diameter table for loading and unloading hose.• Rugged steel construction with durable red

powder coat finish.• Heavy-duty casters are designed for easy mobility.• Simply loosen handle to adjust table from a flat

horizontal to a complete vertical position and anywhere in between.

• 27" diameter table is large enough for both 50' and 100' coils.

Model# DescriptionTT-27 32" L x 28" W x 37" H

Model# DescriptionHW-1 Hose WinderTM-2 Trailer hitch mount

Made in U.S.A.


Three Section Units 32" D x 81" T x 76" L

Two Section Units 32" D x 81" T x 50.5" L

Designed to accommodate SCUBA cylinders, Oxygen bottles, and SCBA cylinders. The modular design allows you to order the S.O.S. Rack™ in the exact configuration your department needs.

Model # SOS2432-MP with one vertical section for cylinders, one for gear bags and one for PPE storage. Shown with security option, single section.

Model # SOS2432-PPE rack for dive gear & turnout gear storage. Includes hanging pole, and adjustable boot & helmet shelves.

Model # SOS2432-C with specially designed “V” shelves to store up to 36 low profile SCBA cylinders (12 per vertical section).

Add storage capacity or reconfigure any S.O.S. Rack with optional “V” or Flat shelves, sold separately.

Model #HBS2432 Model #VSGS2432

S.O.S. Rack™


Model # SOS2432-B with 12 heavy-duty flat shelves for gear bag storage.

Model # SOS2432DBL-MP with 4 “V” Shelves and 3 heavy-duty flat shelves. See chart for other configurations. Shown with security option.

Model# Sections Accessories

SOS2432-C 3 Includes 12 VSGS2432 shelves

SOS2432-B 3 Includes 12 HBS2432 shelves

SOS2432-PPE 3 Includes 6 HBS2432 shelves and accessories

SOS2432-MP 3 Includes 4 VSGS2432 shelves and 6 HBS2432 shelves

SOS2432DBL-C 2 Includes 8 VSGS2432 shelves

SOS2432DBL-B 2 Includes 8 HBS2432 shelves

SOS2432DBL-MP 2 Includes 4 VSGS2432 shelves and 3 HBS2432 shelves

SEC-2432 1 Security option includes top security shelf rear security panel and lockable door

Any S.O.S. Rack™ can be ordered with our security option package which includes a top shelf, a rear panel and a lockable door. The security option is available per single vertical section, on any combination of two sections or for the entire rack.


MPSS-HMPSS-HCMPSS-HSC

Store a wide variety of equipment in a very small footprint (51" L x 21" W x 60" H) with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400' of 2-1/2" hose, or set up as a combination storage system depending on your department’s needs.

MPSS-C MPSS-S

Model# Description

MPSS-H Hose Configuration includes (3) SB-2

MPSS-S SCBA Configuration includes (24) LBSC (Specify bottle size - 5", 6" or 7")

MPSS-C Cylinder Configuration storage includes (8) VSGS-2420, (8) LBSC (Specify bottle size - 5", 6" or 7")

MPSS-HC Hose and Cylinder Configuration includes (2) SB-1 (4) VSGS-2420

MPSS-HSCHose/SCBA/Cylinder Configuration includes (3) VSGS-2420, (2) SB-1, (1) SB-2, (8) LBSC (Specify bottle size - 5", 6" or 7")

SB-1 1 Pair of Single Compartment Hose Ledge

SB-2 1 Pair of Double Compartment Length Hose Ledge

VSGS-2420 V-Shelf for Cylinders

LBSC Air Pack L-Bracket with (2) Speed Clips (Specify bottle size - 5", 6" or 7")

Multiple Purpose Storage System


The Wall Rack Organizer was designed to get your items off the table, out of the drawer, or out from underneath the counter. Made of heavy gauge steel with durable powder coat finish, the Wall Rack Organizer was designed for the Fire Service and will out-last big box store hanging systems.

Mobile Worktable features an industrial stainless steel top, with durable powder coated steel frame and adjustable shelves. Worktables are mounted on four heavy-duty casters - two with foot operated brakes and are available in a two section unit (52.5" L x 25" W x 40" H) or a three section unit (77.25"l x 25" w x 40"h). NEW Worktable System adds heavy-duty powder coated back panels for increased stability and additional storage. Available for two section and three section worktables. Can be added to previously purchased units.

Model# DescriptionWT-2W2424 Two section worktable includes 2 HBS2424 and 2 VSGS2424WT-3W2424 Three section worktable includes 4 HBS2424 and 2 VSGS2424

WBP-2WTwo section add-on Kit includes 2 WBP Back panels with mounting kit, (4) Mop Hangers (MH) and (4) 8" Hooks (8HK)

WBP-3WThree section add-on kit includes 3 WBP Back panels with mounting kit, (8) Mop Hangers (MH) and (8) 8" Hooks (8HK)

WTB Worktable Bin 10-1/2" L x 17-1/2" W x 10" H

HBS-2424 Flat ShelfVSGS-2424 V ShelfMH Mop Hangers8HK 8" HookWBP-TS Horizontal Top Shelf (Not Shown)

Model #WT-3W2424 shown with optional accessories.

Model #WT-2W2424 with WBP-2W shown with optional accessories.

Model #HBS-2424

Model #VSGS-2424

Model# Description

WRO 25-1/2" T x 74-1/2" L x 1-1/4" D Includes: (1) wall panel, (4) wall mounting brackets, (5) MH, (4) 8HK

WRO-TS 21" D x 74-1/2" L Horizontal top shelf is also available for additional storage. Includes: (1) shelf & (3) wall mounting brackets.

MH

8HK

Worktable

Wall Rack Organizer


Chrome plated cart with heavy-duty shelves and casters for easy storage and transport of SCBA bottles. Cart will hold up to twelve low profile bottles, nine 30-minute bottles or six 60-minute bottles.

Units come standard with handles to ease movement, bottle divider grids that are coated to protect bottles from damage, four heavy-duty casters, and two foot operated brakes. The OC-12 can accommodate twelve D or E cylinders. The UBR-4 can accommodate four large diameter SCBA cylinders or four M cylinders. Ships knocked down for freight savings.

Model# Description

OC-1229" L x 18" D x 40" H Holds twelve D or E cylinders

UBR-429" L x 18" D x 40" H Holds four Large Diameter SCBA cylinders or four M cylinders

Model# Description

MBR-MP 24" L x 18" D x 39" H

Model #OC-12 Model #UBR-4

Multi-Purpose Mobile Bottle Cart

EMS Oxygen Cart/Universal Bottle Rack


Units provide safe and organized storage for SCBA cylinders. Mobile cart can be easily rolled allowing you to unload empty bottles and reload apparatus easily and efficiently. Units are supplied with four heavy-duty casters, two with foot operated brakes. Standard units available hold 16-42 bottles or can be custom-designed to fit your specifications.

Solves all of your bottle transport needs. Heavy-duty, reinforced steel construction with durable nylon coating. Bottle carrier holds eight cylinders. Collapsed, it measures only 30" long x 15" wide x 8" high. New design stays up even when empty. Fits both 45-minute and 60-minute bottles.

Model# Description

BC-8 30" L x 15" D x 8" H – collapsed

Model# Type Dimensions

MBR-16 Four shelf levels, holds 16 bottles 36" L x 24" D x 38" H

MBR-24 Six shelf levels, holds 24 bottles 36" L x 24" D x 59" H

MBR-28 Seven shelf levels, holds 28 bottles 36" L x 24" D x 68" H

MBR-36 Six shelf levels, holds 36 bottles 48" L x 24" D x 59" H

MBR-42 Seven shelf levels, holds 42 bottles 48" L x 24" D x 68" H

Handles fold down for easy storage

SCBA Mobile Bottle Carts

Collapsible Bottle CarrierEMS Oxygen Cart/Universal Bottle Rack


• Economical strong bag with with sewn in padded bottom.• Shoulder strap, carry handles and 9" x 9" tool pocket.• Standard color Red with Black straps and handles.

• Cylinder tote is 9" Diameter x 18" H with hard rubber base and rigid sidewalls.• Stands alone for safe side by side storage and cylinder protection.• Large 12" H x 4" W x 2" D pocket for tool and equipment storage with Velcro closure.• Easy carry handle and cylinder secure strap included.

Model# DescriptionAPR 30" L x 13" W x 12" H

Model# DescriptionCET 9" Diameter x 18" H

• Large 11.5" diameter hydrant bucket.• Heavy-duty canvas and hard plastic bottom for durability.• Nylon rope handle with hanging swivel hook.• Holds valves, adapters, hydrant wrench, and spanners.

• Heavy-duty canvas and hard plastic bottom for durability.• Snap closures and nylon carry handles.• Great for heavy tools and parts for rescue equipment.

Model# DescriptionHBB 11-1/2" Diameter

Model# DescriptionMTB 15" L x 8-1/2" W x 12-1/2" H

• Safe Storage and Transport of SCBA Cylinders.• Holds 2 cylinder inserts per bag.• Each insert is a 9" diameter tube with a hard plastic bottom and rigid side walls

to keep cylinders protected and upright.• Each bag has two handles and an over the shoulder strap for ease of transport.• Each bag has a silver reflective stripe for low visibility situations.• Holds up to three mini rescue bags and 1 – 2 small bags.• Holds three 50' coils of air supply hose.• One 9" diameter insert holds either a Controller and Regulator

or an air cylinder (45 or 60 min.)

Model # SRZ-R

Model # MTB

Model # HBB

Model # CET

Model # APR

Model # SRZ-B

Model# DescriptionSRZ-R SCBA Rescue Bag with two 20 minute low profile bottle inserts

SRZ-B SCBA Rescue Bag with two 45-60 minute large profile bottle inserts

Air Pac/Rit Bag

Cylinder/Extinguisher Tote

Hydrant Bucket Bag

Multi-Purpose Tool Bag

SCBA/Cylinder/Rescue Bag


The new safer Search And Marking tool from Groves Incorporated.

S.A.M. was designed to hold doors wide open during room to room searches.

The innovative all-in-one tool has a high-visibility crayon for marking the door, a high-tension steel hook which goes over the hinge, and a glow in the dark high impact strength molded body that fills the space between the door and jamb to hold doors open.

• Holds security doors at multi-unit buildings open.• Lets your back-up respond without being

“buzzed in."• Automatic clamping device holds the B.E.T

on the door.• Fits a wide range of doors from standard entry

to security to fire rated.• Built to last from impact resistant materials.

B.E.T. - Back-Up Entry Tool

S.A.M. - Search and Marking Tool

Model # Description

GCVRSIncludes one 30' long x 3" wide heavy-duty nylon recovery strap with 2 eye hoist hooks with latch.

• 62,500 capacity MBS (Minimum Break Strength).• Berry Compliant.• Heavy-duty eye hooks with latch.• NSPL finish for abrasion reduction.• Weight approximately 30 pounds.• Designed for quick removal of heavy disabled

equipment and debris from various terrain types and conditions.

Groves Custom Vehicle Recovery Strap

Groves Incorporatedwww.ReadyRack.com

[email protected]: 800-991-2120

Fax: 815-338-8640

Wall Mount Red Rack Mobile Single Sided Red Rack *Shown with Security Option

Gear Guard

Mobile Single Sided Ready Rack® in Black

PPE & Hose Drying Cabinet

Large Diameter Hose WinderMobile Hose Cart Mobile Hose Dryer

Multiple Purpose Storage System*Model # MPSS-C shown

Groves Incorporated

1-16-10K

Documents

“WE TAKE CARE OF THE GEAR THAT TAKES CARE OF YOU!”