Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
*Photo may include optional equipment.
We build a better future
With Tier 2 Engine installed
PLEASE CONTACT
www.hyundai-ce.com 2017. 03 Rev.8
ISO Standard cabin All-weather steel cab with 360O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(LH) Lockable door Hot & cool box Storage compartment & Ashtray Cabin roof-steel cover Radio & USB player 12 volt power outlet (24V DC to 12V DC converter) Computer aided power optimization (New CAPO) system 3-power mode, 2-work mode, User mode Auto deceleration & one-touch deceleration system Auto warm-up system Auto overheat prevention system Automatic climate control Air conditioner & heater Defroster Self-diagnostics system Starting Aid (air grid heater) for cold weather Centralized monitoring LCD display Engine speed or Trip meter/Accel. Clock Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warnings Overload Communication error Low battery Air cleaner clogging Indicators Max power Low speed/High speed Fuel warmer Auto idle Door and cab locks, one key Two outside rearview mirrors Fully adjustable suspension seat with seat belt Pilot-operated slidable joystick Four front working lights Electric horn Batteries (2 x 12V x 160 AH) Battery master switch Removable clean-out dust net for cooler Automatic swing brake Removable reservoir tank Fuel pre-filter Boom holding system Arm holding system Track shoes (600mm) Track rail guard Accumulator for lowering work equipment Electric transducer Lower frame under cover (Normal)
Fuel filler pump (35 L/min) Beacon lamp Single-acting piping kit (breaker, etc.) Double-acting piping kit (clamshell, etc.) Quick coupler Travel alarm Booms 6.15 m 6.45 m Arms 2.2 m 2.5 m 3.2 m 4.05 m Cabin FOPS/FOG (ISO/DIS 10262 Level 2) FOPS (Falling Object Protective Structure) FOG (Falling Object Guard) Cabin ROPS (ISO 12117-2) ROPS (Roll Over Protective Structure) *220LC-9S/220-9S Only Cabin lights Cabin front window rain guard Sun visor Track shoes Triple grousers shoe (700 mm) Triple grousers shoe (800 mm) Triple grousers shoe (900 mm) Double grousers shoe (700 mm) Lower frame under cover (Additional) Tool kit Rearview camera Seat Mechanical suspension seat with heater Hi-mate (Remote Management System) Fuel warmer Air compressor Rear work lamp 4-pattern change Cabin guard front Wire net Fine net
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.* The photos may include attachments and optional equipment that are not available in your area.* Materials and specifications are subject to change without advance notice.* All imperial measurements rounded off to the nearest pound or inch.
Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more precision, versatile machine preferences, and proven quality. Take pride in your work with Hyundai!
2/3
Pride at Work
*Photo may include optional equipment.
Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on stepsLarge upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Grease-type track tensioner
Undercarriage
New patented hydraulic control for improved controllability / Improved control valve design for added efficiency and smoother operation / New auto boom and swing priority system for optimum speed / New auto power boost feature for additional power when needed / Improved arm-in and boom-down flow regeneration system for added speed and efficiency
Hydraulic System Improvements
Easy & Simple serviceabilityLow noise / Auto engine warm up feature / Anti-restart feature
Engine Technology
Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumpsNew compact solenoid block equipped with 3 solenoid valves, 1 EPPR valve, 1 check valve accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock
Pump Compartment
Improved VisibilityEnlarged cab with improved visibilityLarger right-side glass, now one piece, for better right visibilitySafety glass windows on all sides - less expensive than (polycarbonate) and won’t scratch or fadeCloseable sunshade for operator convenience / Reduced front window seam for improved operator view
Improved Cab ConstructionNew steel tube construction for added operator safety, protection and durabilityNew window open/close mechanism designed with cable and spring lift assist and single latch release
Improved Suspension Seat / Console AssemblyErgonomic joysticks with auxiliary control buttons for attachment use. Now with new sleek styling
Advanced 7” Color ClusterNew Color LCD Display with easy to read digital gauges for hydraulic oil temperature, water temperature, and fuel. Simplified design makes adjustment and diagnostics easier. Also, new enhanced features such as rear-view camera are integrated into monitor.3 power modes : (P) Power, (S) Standard, (E) Economy, 2 work modes : Dig & Attachment, (U) User mode for operator preferenceEnhanced self-diagnostic features with GPS / satellite technologyOne pump flow or two pump flow for optional attachment is now selectable through the cluster / New anti-theft system with password capabilityBoom speed and arm regeneration are selectable through the monitor.Auto power boost is now available - selectable (on/off) through the monitor.Powerful air conditioning and heat with auto climate control, 20% more heat and air output than 7 series!
Hi-mate (Remote Management System) works through GPS/satellite technology to ultimately provide better customer service and support.
Enhanced Operator Cab
Machine Walk-Around
The advanced new cluster with 7 inch wide color LCD screen and toggle switch allows the operator to select his personal machine preferences. Power and work mode selection, self diagnostics, optional rear-view camera, maintenance check lists and start-up machine security were integrated into the cluster to make the machine more versatile and the operator more productive.
Work is stressful enough. Your work environment should be stress free. Hyundai's 9S Series provides improved cab amenities, additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the operator with optimum air temperature. An advanced audio system with USB player, AM/FM stereo is perfect for listening to music favorites.
In 9S Series cabin you can easily adjust the seat, console and armrest settings to best suit your personal operating preferences. Seat and console position can be set together and independent from each other. Other preference settings that add to overall operator comfort include the fully automatic high capacity airconditioning system and the radio / USB player.
Operator - Friendly Cluster
4/5
PreferenceOperating a 9S Series is unique to every operator. Operators can fully customize their workenvironment and operating preferences to fit their individual needs.
*Photo may include optional equipment.
Wide Cabin with Excellent Visibility
The newly designed cabin was conceived for more space, a wider field of view and operator comfort. Special attention was given to a clear, open and convenient interior with plenty of visibility on the machine surroundings and the job at hand. This well balanced combination of precision aspects put the operator in the perfect position to work safely and securely.
Reduced Stress
Operator Comfort
PrecisionInnovative hydraulic system technologies make the 9S series excavator fast, smooth and easy to control.
*Photo may include optional equipment.
The engine horsepower and hydraulic horsepower together in unison through the advanced CAPO(Computer Aided Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing priority, power mode selection and optional work tools at the touch of a button.The CAPO system also provides complete self diagnostic features and digital gauges for important information like hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed throughout the hydraulic system as well as the hydraulic flow.
Computer Aided Power
Improved Hydraulic SystemTo achieve optimum precision, Hyundai redesigned the hydraulic system to provide the operator with super fine touch and improved controllability. Improved pump flow control reduces flow when controls are not being used to minimize fuel consumption.Improved spool valves in the control valve are engineered to provide more precise flow to each function with less effort.Improved hydraulic valves, precision-designed variable volume piston pumps, fine-touch pilot controls, and enhanced travel functions make any operator running a 9S
Series look like a smooth operator. Newly improved features include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom and swing priority for optimal performance in any application.
6/7
P (Power Max) mode maximizes machine speed and power for mass production. S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved fuel economy. For maximum fuel savings and improved control, E (Economy) mode provides precise flow based on load demand. Three unique power modes provide the operator with custom power, speed and fuel economy.
Power Mode
Some jobs require more precise machine settings. Using the versatile U (User) mode, the operator can customize engine speed, pump output, idle speed and other machine settings for the job at hand.
User Mode
The work mode allows the operator to select single flow attachments like a hydraulic breaker or bi-directional flow attachments like a crusher. Flow settings unique to each attachment can be programmed from within the cluster.
Work Mode
Auto Boom-swing PriorityThis smart function automatically and continuously looks the ideal hydraulic flow balance for the boom and swing motions of the machine. The advanced CAPO system monitors the hydraulic system and adjusts its settings to maximize performance and productivity.
A More Reliable Way To Reach Your Dream.Bosch in-line fuel pump delivers higher injection pressures for cleaner combustion and gives the operator option of using lowlubricity fuels.Holset HX40 turbocharger optimizes operation across the torque curve using the wastegate turbo, for excellent low-end torque.Unitized block design results in 40% fewer parts than traditional diesels, with fewer joints and simplified maintenance.Resistive grid heating preheats intake air electrically to enhance startability.Dual ni-resist pistons minimize oil consumption and increase power and durability.
*Photo may include optional equipment.
9S series is designed for maximum performance to keep the operator working productively.
Performance
*Photo may include optional equipment.
Durable track rail guards keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs.
Track Rail Guard & Adjusters
Structure StrengthThe 9S Series cabin structure has been fitted with stronger but slimmer tubing for more safety and improved visibility. Low-stress, high strength steel is integrally welded to form a stronger, more durable upper and lower frame. Structural integrity was tested by way of FEM (Finite Elements Method) analysis and long-term durability tests.
HYUNDAI HM8.3 The six cylinders, 4 cycle, turbo-charged, charger air cooled engine is built for power, reliability, economy and low emissions.
8/9
Profitability9S series is designed to maximize profitability through improved efficiencies,enhanced service features and longer life components.
*Photo may include optional equipment.
10/1110/11
Easy AccessGround-line access to filters, lube fittings, fuses, machine computer components and wide open compartments makes service more convenient on the 9S series.
Fuel Efficiency9S Series excavators are engineered to be extremely fuel efficient.New innovations like two-stage auto decel system and the new economy mode help to conserve fuel and reduce the impact on the environment.
Hi-mate (Remote Management System)Hi-mate, Hyundai's proprietary remote management system, provides operators and dealer service personnel access to vital service and diagnostic information on the machine from any computer with internet access. Users can pinpoint machine location using digital mapping and set machine work boundaries, reducing the need for multiple service calls. Hi-mate saves time and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime.
Long-Life Components9S series excavators were designed with bushings designed for long-life lube intervals (250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters (1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and integrated preheating systems which extend service intervals, minimize operating costs and reduce machine down time.
Operating weight
kg
R330LC-9S
R330LC-9SH
R330NLC-9S
R330NLC-9SH
R330LC-9S H/W
R330LC-9SH H/W
R330LC-9S
R330LC-9SH
R330LC-9S H/W
R330LC-9SH H/W
R330LC-9S
R330LC-9SH
R330LC-9S H/W
R330LC-9SH H/W
R330LC-9S
R330LC-9SH
R330LC-9S H/W
BoomLength
Weight
Length
Weight
mm
kg
mm
kg
2,200
1,560
189.3 [205.5]
211.8 [230.0]
196.6 [213.4]
202.8 [220.2]
189.3 [205.5]
211.8 [230.0]
178.9 [194.2]
185.1 [201.0]
189.3 [205.5]
211.8 [230.0]
143.2 [155.5]
147.1 [159.7]
189.3 [205.5]
211.8 [230.0]
119.6 [129.9]
122.7 [133.3]
[ ]:
Power
Boost
2,500
1,650
3,200
1,770
6,4503,030
4,050
1,870
Remarks
Arm
Bucket
digging
force
SAE kN
ISO kN
SAE kN
ISO kN
Arm
crowd
force
Note: Boom weight includes arm cylinder, piping, and pin
Arm weight includes bucket cylinder, linkage, and pin
DIGGING FORCE
Ground pressure
kgf/cm2
0.63
0.64
0.63
0.63
0.68
0.68
0.55
0.56
0.59
0.60
0.49
0.49
0.52
0.53
0.44
0.44
0.61
32,700
33,000
32,500
32,800
35,200
35,500
33,270
33,570
35,770
36,070
33,650
33,950
36,950
36,450
34,030
34,330
36,680
Specifications
12/13
Capacity
m3
SAE
heaped
CECE
heaped
Without
side cutters
With
side cutters
Width
mm (in) Weight
kg
Recommendation mm
6,450 Boom 6,150 Boom
0.90
1.14
1.44
1.74
2.10
1.44
1.44
1.60
1.73
1.83
◈
◉◉◉◉
0.80
1.00
1.25
1.50
1.80
1.25
1.25
1.39
1.50
1.59
950
1,110
1,380
1,620
1,910
1,470
1,470
1,585
1,710
1,765
1,070
1,230
1,500
1,740
2,030
-
-
-
-
-
870
980
1,110
1,230
1,370
1,380
1,470
1,650
1,650
1,845
SAEheaped
m3
2,200 Arm 2,500 Arm 3,200 Arm 4,050 Arm 2,200 Arm
●
●
●
●
■
●
●
■
■
■
●
●
●
●
■
●
●
■
■
▲
●
●
●
■
▲
■
■
■
▲
▲
●
●
■
▲
-
▲
▲
▲
-
-
●
●
●
●
■
●
●
●
●
■
◈ Heavy duty bucket
◉ Rock-Heavy duty bucket●: Applicable for materials with density of 2,000 kg /m3 or less
■: Applicable for materials with density of 1,600 kg /m3 or less
▲: Applicable for materials with density of 1,100 kg /m3 or less
All buckets are welded with high-strength steel.
BUCKETS
0.90 1.14 1.44 1.74
Booms and arms are welded with a low-stress, full-box section design. 6.15m, 6.45m Booms and 2.2m, 2.5m, 3.2m, 4.05m Arms are available.
ATTACHMENT
2.10
SWING SYSTEMSwing motor
Swing reduction
Swing bearing lubrication
Swing brake
Swing speed
Fixed displacement axial pistons motor
Planetary gear reduction
Grease-bathed
Multi wet disc
9S:9.5 rpm
COOLANT & LUBRICANT CAPACITYRefilling
Fuel tank
Engine coolant
Engine oil
Swing device-gear oil
Final drive(each)-gear oil
Hydraulic system(including tank)
Hydraulic tank
liter
500
40.0
28
6.0
8.0 (7.8)
330.0
190.0
UNDERCARRIAGEThe X-leg type center frame is integrally welded with reinforced box-section track
frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock
absorbing springs and sprockets, and a track chain with double or triple grouser shoes.
Center frame
Track frame
No. of shoes on each side
No. of carrier roller on each side
No. of track roller on each side
No. of rail guard on each side
X - leg type
Pentagonal box type
48 EA
2 EA
9 EA
2 EA
OPERATING WEIGHT (APPROXIMATE)Operating weight, including 6.450mm boom, 3,200mm arm, SAE heaped 1.44m3
bucket, lubricant, coolant, full fuel tank, full hydraulic tank, and all standard
equipments.
MAJOR COMPONENT WEIGHTUpperstructure
Boom (with arm cylinder)
Arm (with bucket cylinder)
7,920 kg
3,030 kg
1,770 kg
OPERATING WEIGHTShoes
Type
Triple grouser
Double grouser
Width mm
600 mm
CONTROLPilot pressure operated joysticks and pedals with detachable lever provide almost
effortless and fatigueless operation.
Pilot control
Traveling and steering
Engine throttle
Two joysticks with one safety lever
(LH): Swing and arm, (RH): Boom and bucket (ISO)
Two levers with pedals
Electric, Dial type
MAKER / MODEL
Type
Rated
flywheel
horse power
Max. torque
Bore X stroke
Piston displacement
Batteries
Starting motor
Alternator
124.3 kgf.m (899 lbf.ft) / 1,300 rpm
114mm X 135mm (4.49" X 5.31")
8,290cc (506 in3)
2 X 12V X 160AH
24V, 7.2 kW
24V, 90 Amp
DIN
SAEJ1995 (gross)
J1349 (net)
6271 / 1 (gross)
6271 / 1 (net)
Water cooled, 4 cycle Diesel,
6-cylinders in line, direct injection,
turbocharged, charger air cooled, low emission
263 HP (196kW) at 1,900 rpm
252 HP (188kW) at 1,900 rpm
266 PS (196kW) at 1,900 rpm
255 PS (188kW) at 1,900 rpm
HYUNDAI HM8.3
ENGINE / R330LC-9S
HYDRAULIC MOTORS
Travel
Swing
Two speed axial pistons motor
with brake valve and parking brake
Axial piston motor with automatic brake
HYDRAULIC CYLINDERS
No. of cylinder
bore X stroke
Boom: 2-150 X1,480 mm
Arm: 1-160 X 1,685 mm
Bucket: 1-140 X 1,285 mm
RELIEF VALVE SETTINGImplement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
350 kgf/cm2
350 kgf/cm2
380 kgf/cm2
300 kgf/cm2
40 kgf/cm2
Installed
Cross-sensing and fuel saving pump system.
HYDRAULIC SYSTEMMAIN PUMPType
Rated flow
Sub-pump for pilot circuit
Variable displacement tandem axis piston pumps
2 X 282 L /min
Gear pump
DRIVES & BRAKESDrive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed (high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Axial piston motor, in-shoe design
Planetary reduction gear
29,500 kgf
5.8 km/hr / 3.3 km/hr
35o (70 %)
Multi wet disc
700 mm
800 mm
900 mm
700 mm
◉◉
◉◉
1.441.60
1.731.83
◈1.44
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
ED(D')
LK
HBA
I
J F
GC
Dimensions & Working Range Dimensions & Working Range
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
A
A’
B
B’
C
D
E
F
2,200
10,330
10,110
6,370
6,160
5,980
10,220
7,050
4,700
2,500
10,550
10,330
6,670
6,470
5,920
10,170
7,050
4,500
3,200
11,140
10,940
7,370
7,210
6,360
10,310
7,240
4,470
4,050 2,200
6,150
11,950 10,020
11,760 9,800
8,220 6,160
8,080 5,950
7,260 5,710
10,710 9,940
7,630 6,780
4,470 4,520
6,450 Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
A
A’
B
B’
C
D
E
F
2,200
10,330
10,040
6,100
5,890
5,700
10,500
7,330
4,700
2,500
10,550
10,270
6,400
6,200
5,650
10,450
10,450
4,500
3,200
11,140
10,880
7,100
6,940
6,080
10,590
7,520
4,470
4,050 2,200
6,150
11,950 10,020
11,710 9,730
7,950 5,880
7,950 5,680
6,980 5,440
10,990 10,220
7,910 7,060
4,470 4,520
6,450
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
R330LC-9S
R330NLC-9S
R330LC-9S
R330NLC-9S
A
B
C
D
D’
E
F
G
H
4,030
4,030
4,940
1,200
3,380
3,315
2,980
3,140
500
2,680
2,390
Boom length
Arm length
Overall length
Overall height
of boom
I
J
2,200
11,230
3,640
600Track shoe width
Overall
width
K
L3,280
2,990 3,090 3,190 3,290
2,500
11,100
3,670
700
3,380
3,200
10,980
3,380
800
3,480
4,050 2,200
6,150
10,980 10,930
3,860 3,680
900
3,580
6,450 6,150 6,450
Unit : mm Unit : mm
Unit : mm Unit : mm
R330LC-9S / R330NLC-9S DIMENSIONS R330LC-9S HIGH WALKER DIMENSIONS
R330LC-9S / R330NLC-9S WORKING RANGE R330LC-9S HIGH WALKER WORKING RANGE
ED(D')
LK
HBA
I
J F
GC
R330NLC-9S
R330LC-9S
4,030
4,940
1,500
3,380
3,315
2,980
3,440
765
2,870
14/15
Boom length
Arm length
Overall length
Overall height
of boom
I
J
2,200
11,220
3,740
2,500
11,100
3,760
3,200
10,910
3,360
4,050 2,200
11,000 10,920
3,810 3,780
A
B
C
D
D’
E
F
G
H3,470 3,570 3,670 3,570
Triple grouser Double grouser
600 700 800 700
Type
Width
Track shoe
width
Overall width
K
L
Load pointheight
m
Boom : 6.45m / Arm : 3.2 m / Bucket : 1.44 m3 SAE heaped / Shoe : 800mm triple grouserLoad radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkg
*11380*15350
*11380*15350
*10240*14470*19470*21820
*10240*14470*19470*21820
*13400*16400*17910*18150*17370*15410*11340
129501187011350112001128011560
*11340
*8090*9820
*11460120601185011850
*11430
*8090821076607280711071107290
*5240*6500*7190*81108660841082708280
*52406270602057005390516050405050
*5440659064206280
4290413039703840
*59705910533050505010519056906710
*7480
450037403320310030503160348041505640
9.069.84
10.3110.5210.4810.199.638.747.37
Boom : 6.45m / Arm : 3.2 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkg
*11380*15350
*11380*15350
*10240*14470*19470*21820
*10240*14470*19470*21820
*13400*16400*17910*18150*17370*15410*11340
126201154011010108601094011220
*11340
*8090*9820
*11460116901149011490
*11430
*8090799074307060688068807060
*5240*6500*7190*81108400814080108020
*52406100585055305220499048704800
*5440639062106080
4150399038303710
*59705730516048804830502055006500
*7480
437036203200299029303040335040105470
9.069.84
10.3110.5210.4810.199.638.747.37
kgkgkgkgkgkgkgkgkg
m
16/17
Lifting CapacityLifting CapacityR330LC-9S R330LC-9SRating over-front Rating over-side or 360 degree Rating over-front Rating over-side or 360 degree Boom : 6.45m / Arm : 2.5 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m
*15010*22800*19110
*15010*22800*19110
*11600*15130*17590*18360*18010*16720*14080
*11600122201136011070110601124011620
*9120*1077012060117301163011710
*10340
8430787073907110701070907380
*7320*79308690840082008130
598057705490524050604990
6240 3860
*67206430 574054205380563062807670
*7300
504041003600336033103470389048007080
8.349.199.709.929.889.578.977.986.42
Boom : 6.45m / Arm : 2.5 m / Bucket : 1.44 m3 SAE heaped / Shoe : 800mm triple grouser
Load pointheight
m
Load radius3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkg
*15010*22800*19110
*15010*22800*19110
*11600*15130*17590*18360*18010*16720*14080
*11600125501170011400114001157011950
*9120*10770*12210121001199012070
*10340
8660809076107330724073107600
*7320*7930*8770866084708400
615059405660540052305160
6440 4000
*67206630593056005570582064907910
*7300
519042303720348034403590403049607290
8.349.199.709.929.889.578.977.986.42
Boom : 6.45m / Arm : 4.05 m / Bucket : 1.44 m3 SAE heaped / Shoe : 800mm triple grouser
Load pointheight
m
Load radius1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkg
*9850*13020*16670
*9850*13020*16670
*18220*10440*10810*13390*16980*21800*20030
*18220*10440*10810*13390*16980*21800*20030
*11250*14750*17060*18030*17900*16680*13950
*11250123301154011190111301128011670
*8610*10470*11950118601175011830
*10120
8480785073807100700070807360
*6270*7280*83608440824081608240
6170582054805190500049305010
*4530*5750*65306450627061506140
4520438041903990382037203710
*525051104660444043904520487055706980
*6790
3760319028502670262027002930339043206630
10.0010.7111.1311.3211.2911.0310.529.728.536.71
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook located on the back of the bucket.4. (*) indicates the load limited by hydraulic capacity.
m
Boom : 6.45m / Arm : 4.05 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouserLoad radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkg
*9850*13020*16670
*9850*13020*16670
*18220*10440*10810*13390*16980*21800*20030
*18220*10440*10810*13390*16980*21800*20030
*11250*14750*17060*18030*17900*16680*13950
*11250 120001121010860108001095011330
*8610*1047011810114901138011460
*10120
8250763071506880678068507130
*6270*7280*83608180798079007980
6000566053105020483047704840
*4530*575064606240606059505930
4380425040603860369035803570
*525049404500428042304360470053906760
*6790
3640308027502570252025902810327041806430
10.0010.7111.1311.3211.2911.0310.529.728.536.71
Load pointheight
m
Load pointheight
m
Boom : 6.45m / Arm : 3.2 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouserLoad radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkg
*12090*16150
*12090*16150
*10990*15330*20540*20940
*10990*15330*20540*20940
*14050*16800*18040*18080*17110*14870
*140501353013080129801309013430
*8400*10150*11720*1275012670
*12630*10980
*8400921086808330819082208450
*5730*6600*7350*8290*9210898088708910
*5730*6600676064306130592058205850
*5820703068606740
4880471045504440
*5990*6130566054205420567062707510
*7390
492041803770358035603720414050006990
9.249.95
10.3710.5310.4510.119.508.537.03
m
Boom : 6.45m / Arm : 4.05 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkg kg
*9850*13020*16670
*9850*13020*16670
*18220*10440*10810*13390*16980*21800*20030
*18220*10440*10810*13390*169801800018700
*11250*14750*17060*18030*17900*16680*13950
11040984090908760871088509210
*8610*1047011730114201131011390
*10120
6930632058705600551055805850
*6270*7280*83608130792078407920
5060472043904110393038603930
*4530*575064106200602059005890
3660353033403150298028802870
*525049104470425042004330467053506710
*6790
3010251022102050200020502240263034105340
10.0010.7111.1311.3211.2911.0310.529.728.536.71
Capacity Reach
m
At max. reach
*3030*477049704770457044104320
*52805370495047504740492053506190
*7060
415036003270311030903200350040905280
10.1610.8111.1911.3311.2610.9510.399.538.25
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook located on the back of the bucket.4. (*) indicates the load limited by hydraulic capacity.
Boom : 6.45m / Arm : 4.05 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkg kg
*7400*10420*13660*17430
*7400*10420*13660*17430
*20040*10150*11200*13990*17770*22910*18860
*20040*10150*11200*13990*17770*22910*18860
*11950*15290*17340*18090*17760*16310*13180
*119501396013230129401292013120
*13180
*8970*10790*121701260012530
*12000*9410
*8970886084108160810082008550
*6440*7490*85508970879087408860
*6440656062105940577057205830
*3030*4770*5980*6650687066906590
Load pointheight
m
Boom : 6.45m / Arm : 3.2 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouserLoad radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkg kg
*11380*15350
*11380*15350
*10240*14470*19470*21820
*10240*144701799018520
*13400*16400*17910*18150*17370*15410*11340
10430941089208780885091109660
*8090*9820
*11460116201141011410
*11430
7260667061405780561056105780
*5240*6500*7190*81108340809079507960
*52405160491046004310408039603970
*5440634061706030
3440328031203000
*59705690512048504800498054606450
*7480
365029902610241023602440271032804520
9.069.84
10.3110.5210.4810.199.638.747.37
Lifting Capacity Lifting CapacityR330NLC-9S Rating over-front Rating over-side or 360 degree R330LC-9S HIGH WALKER Rating over-front Rating over-side or 360 degree
18/19
Boom : 6.45m / Arm : 2.5 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkg
*15010*22800*19110
*1501018590
*19110
*11600*15130*17590*18360*18010*16720*14080
113001006092508980897091309490
*9120*1077011980116601155011640
*10340
7100656061005830574058106090
*7320*79308630835081508080
505048404570432041504080
6190 3160
*67206390570053805340559062307620
*7300
424034102960274026902820318039605910
8.349.199.709.929.889.578.977.986.42
Boom : 6.45m / Arm : 2.5 m / Bucket : 1.44 m3 SAE heaped / Shoe : 600mm triple grouser
Load pointheight
m
Load radius3.0 m 4.5 m 6.0 m 7.5 m 9.0 m Capacity Reach
m
At max. reach
7.5 m6.0 m4.5 m3.0 m1.5 m
Ground-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkg
*16360*22580*18050
*16360*22580*18050
*12260*15720*17850*18370*17850*16360*13340
*122601415013390131701320013410
*13340
*9420*11070*124301285012780
*12250
*942091008650840083308440
*7410*8070*8930919090208970
692066906400615059905950
700015430
471010380
*6730*684062505970599063307140
*7890
56304700421040003990422047805990
8.539.319.769.939.849.488.827.75