WDT for H3I.PPTX

Slide 1

Smart Deployment Toolkit Propaganda Slides (V1R2) 2014-01

HUAWEI TECHNOLOGIES CO., LTD.Huawei Confidential 1Tool IntroductionConfiguration requirements:Hardware requirements:1. Android smartphone: Specifications: Android 2.3 or above, 1 GHz CPU, 700 MB RAM, and 2 GB SD card2. Wi-Fi AP: TP-LINK TL-MR12U

Software requirements:SDT.apk (size: 3 MB)

(Optional) RF test software PHU: FDD-LTE phone: Huawei U9202L_1. Internal demands BOM (51055756). The PHU can be installed on the phone. TDD-LTE phone: Huawei G716 (customized phone for China Mobile). Internal demands BOM (51090002) or procurement. The PHU can be installed on the phone.For details about how to apply for the PHU software version and detailed operations, see GENEX PHU User Guide.Smart Deployment Toolkit (SDT)Smart Deployment Toolkit, the smartphone application software (SDT.apk) developed by Huawei, focuses on deployment and acceptance scenarios and integrates the expert system. It provides convenient operations and rich functions, and is a useful tool for site deployment and maintenance.

Required only: network cable + AP + smartphoneUbiquitous phones, mainstream Android smartphones, cheap APs, and convenient procurementAll (USB flash drive, drive test phone, camera, GPS, bar code scanner, alarm panel, paper, pencil.. ) in one (smartphone) Content Page Title 35-40pt Color: R153 G0 B0Corporate Font: FrutigerNext LT MediumFont to be used by customers and partners: Arial

Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #2Function 1: Prepare for the Deployment1. Deployment data preparation2. Device connectionTurn on the AP (the work mode must be AP).The mobile phone connects to AP using Wi-Fi and the AP connects to the UMPT using the network cable.HuaweiBTSInfo

BTS3900LICStores the license file (*.DAT)SoftwareBase Station NameStores base station softwareStores the base station configuration file M2000.XML

Example: preparing deployment data for base stations in SRAN8.0

Step 1: In the HuaweiBTSInfo directory, create the GSM, UMTS, LTE, BTS3900, and LIC folders based on project RATs.Step 2: Create the Software and sitename folders in each RAT directory.Step 3: Copy the HuaweiBTSInfo folder to the root directory of phone.

Note To save storage space, you can delete unneeded software packages of the BTS3900 based on site requirements, such as BOOTROM, GBTS, and eGBTS. Content Page Title 35-40pt Color: R153 G0 B0Corporate Font: FrutigerNext LT MediumFont to be used by customers and partners: Arial

Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #3

3. SDT startClick the SDT icon, select the RAT of base stations you want to log in to, and select the site where the configuration file is saved. The navigation page is displayed. According to standard, software version and control board to select the corresponding "Select Mode" option, please refer to the following table.Function 1: GUI

SRAN Version DescriptionRAT Selection SRAN 7.0,7.1NodeB running on the WMPT or UMPT UMTS SRAN 7.0,7.1,8.0,8.1GBTS running on the GTMU or GTMUb GSM SRAN 7.0,7.1eNodeB running on the LMPT or UMPT LTE SRAN 8.0,8.11. BTS3900 WCDMA (single mode) running on the WMPT 2. BTS3900 LTE (single mode) running on the LMPT 3. BTS3900 WCDMA (single mode), BTS3900 LTE (single mode), and co-MPT base station BTS3900-G\U\L\GU\GL\UL\GUL running on the UMPTBTS3900 Phone does not require to pre-connect Wifi, Please click "Deployment" icon and then to select Wifi signal, then can connect AP and login station.

Content Page Title 35-40pt Color: R153 G0 B0Corporate Font: FrutigerNext LT MediumFont to be used by customers and partners: Arial


4. The base station software, scripts and license issuedThe progress of loading the software, configuration, or license is visible. You can select software RATs of co-MPT base stations.

Function 2: One-Click DeploymentOne-click deploymentVisible progress and status



5. Base station commissioning-transmission link setup visibilityThe visibility of IP transmission deployment process allows you to locate faults quickly. It reduces thime from 20-minute to 1.Red, yellow, and green lights indicate task results, providing a simple and direct view. You can expand them to view details.Note: Create site NE icons on the M2000 to ensure that the status of 1. OMCH/OML Information is in green, indicating connected.Function 2: GUI-based DetectionAutomatic detection of the expert systemComprehensive transmission information and clear fault viewUseful tool of transmission fault locating and demarcation



6. Base station commissioning - Transmission fault checkThe input-free function automatically reads the next hop IP address of the base station and the IP addresses of the BSC and M2000. The Ping and Tracert tests are executed automatically.You can manually change and type the IP address, and check service IP addresses.Function 2: GUI-based DetectionManual Ping and Tracert tests



The SDT allows you to test the VSWR, intermodulation, and antenna cross feeder connection functions.Commands are automatically executed and results are displayed in red, yellow, and green, providing a direct and simple view.7. Base station commissioning - Antenna checkFunction 2: GUI-based DetectionAutomatic testsNo rework during the antenna constructionNote: After the software and configuration data is download , base stations are restarted, wait for 12 minutes and then do the antenna check function. Software of RRUs takes effect slowly. It takes 12 minutes for three 8-channel RRUs to take effect.



You can query all alarms.You can include ALarmS and ALarmE in start IDs of alarm query by modifying the SDTConfig.txt file. Alarms IDs 1~2147483646 are recommended, If you need to see all the alarms.8. Base station commissioning - Alarm queryFunction 2: GUI-based DetectionEnsure that no engineering alarms exist before you leave sites to avoid possible future rework.



Allows you to query various kinds of information.The GBTS does not support the board, optical power, cell, and GPS check at the local end.9. Base station commissioning - Board, optical power, cell, and GPS checkFunction 2: GUI-based DetectionPlaces where problems probably occur are clearly displayed.



Attachment 1: Base station commissioning - Site deployment logsSite deployment logs display operation processes and records related to base stations.All operations related to base stations are traceable.Function 2: GUI-based DetectionEach operation is recorded precisely, allowing you to trace and locate operations easily.



Attachment 2: Site acceptance - Data uploadingAfter site deployment is complete, data is automatically uploaded to the OMC engineer email.Sender and recipient emails are configurable. The sender email box must be Gmail.

Function 2: GUI-based DetectionOne-click uploading and OMC synchronization locating



Base station commissioning - Operation replayYou can replay deployment data on the mobile phone. Deployment results are displayed on GUIs, facilitating later problem locating and communication. Function 2: Data Replay for Easy Troubleshooting



Function 3: Site Acceptance - Site Photo-Taking

Fixed entry photo-taking: The mobile phone displays pre-configured entries on the screen. Workers take phones one by one based on these entries.Random fault photo-taking. Take photos of all faults. Fault photos can be uploaded in real time, facilitating fault locating in time.These entries can be customized. Photos are taken based on these entries. No photo is missing or improperly taken.



Function 4: Site Acceptance - ESN Bar ScanningWorkers scan bar codes based on pre-configured ESN entries. The function supports one-dimension and two-dimension code scanning.The site name, RAT, and ESN name are automatically added before the ESN and then sent to OMC engineers by SMS or email. For example, Site78_GSM_BBU:210305394710CB001076.The BBU ESN can be used in ESN binding during the M2000 PNP deployment in real time. This avoids the inefficiency and errors of manual ESN reading.

Avoid ESN copying and reading errors.Real-time uploading accelerates the PNP deployment. Content Page Title 35-40pt Color: R153 G0 B0Corporate Font: FrutigerNext LT MediumFont to be used by customers and partners: Arial


Enable the function manually to automatically obtain GPS information.GPS information is automatically saved in deployment reports.GPS information is sent in real time, helping real-time position management.Function 5: Site Acceptance - Acquisition of GPS dataAutomatic GPS picture savingCorrect site positionsCorrect time information


Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #16Function 7: Windows Background Tool - Operation ReplayThe mobile phone uploads deployment data in real time. The server displays deployment GUIs synchronously, facilitating fault locating and communication.Copies the deployment data folder HuaweiSDTData in the root directory to the PC.Replays deployment data on the PC and stimulates mobile phone GUIs to reproduce previous onsite GUIs.

Synchronous display of site faultsWhole replay of deployment processEveryone is a GTAC expert


Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #17Attachment 2: Recommended APsID ModelOnline Purchase Website1 TP-LINK TL-MR12U,TP-LINK TL-MR13U www.360buy.com, www.taobao.com, and www.amazon.com. ID ModelOnline Purchase Website1 TP-Link WR702N www.360buy.com and www.taobao.com, www.amazon.com and www.ebay.com, www.eachnet.com and www.bestbuy.com, shopping.yahoo.com and www.walmart.com. 2 POWERLINK AP2403 or POWERLINK PT-AP2403 www.amazon.com and www.ebay.com, www.eachnet.com and www.bestbuy.com. 3 B-Link BL-MP01 www.360buy.com and www.taobao.com, andwww.amazon.com. 1. List of recommended APs with internal and mobile power supplies2. List of other APs requiring outer power supplies from USB ports of main control boardsNote: The UMPT does not have a USB port. Therefore, these APs requiring outer power supplies cannot be powered on by the UMPT.


Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #18Thank you! Content Page Title 35-40pt Color: R153 G0 B0Corporate Font: FrutigerNext LT MediumFont to be used by customers and partners: Arial

Content Page Text :28-30ptBullets level 2-520-30pt Color:BlackCorporate Font: FrutigerNext LT MediumFont to be used by customers and partners: ArialHISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD.Page #

Documents

WDT for H3I.PPTX