Upload
kamil-ikram
View
216
Download
0
Embed Size (px)
DESCRIPTION
mould
Citation preview
WOODEN BOAT CONSTRUCTION 1
LCD 20702
PRACTICAL TEST 1 – Making Mould Frames
Instruction:
o Individually, or in a group, you are required to develop frames
according to lofted plan.
o This will include the related features of frames such as notches,
rabbet, gusset etc.
o You will be given 4 week to complete the task.
The following is the suggestion of steps should be taken for the frame
construction;
i. Copying the frame templates from lofted plan
ii. Cutting frames and their notches
iii. Frame Assembly
iv. Rabbeting
Assessment
You will be assessed on the following criteria;
o Safety
o Woodworking technique
o Boatbuilding technique
o Finished product
o Timing
o Group contribution
ASSESMENT SCHEME – LCD 20702 WBC1
NAME: _______________________________________________
STUDENT ID: ____________________________________________
FRAME CONSTRUCTION
No. Criteria Rating
1. Cutting the correct size of timber for frame
according to lofted plan.
- transfer lofted plan into template
- transfer template into frame
1 2 3 4 5
1 2 3 4 5
2. Making frames features perfectly
- Making gusset properly
- notches for keel, sheer and chine battens
- Limber holes for each frame.
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
3. Trimming frame for rabbet according to lofted plan
1 2 3 4 5
4. Finish making all frames according to bodyplan
2 4 6 8 10
5. Assignment / REPORT
2 4 6 8 10
Total
50
Overall Performance
WEAK FAIR EXCELLENT
Checked by: Received by:
………………………………… …………………………………….
KAMARUL NASSER MOKRI ( )
Assistant Lecturer Student ID:
Date: Date: