Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
WATER SAVING FLOW REGULATORS
Up to 70% Water Savings at Taps, Showers etc.
ApplicationOutlets supplied by water with a minimum pressure of approx. 1 Bar
(i.e. pumped/mains water supply, or gravity fed tall buildings).
FunctionPoint of use regulators designed to provide constant and maximum flow rates at taps and
showers etc. irrespective of changes in demand or water pressure fluctuations between 1–10 Bar.
Benefits• Large water (+ energy) savings. Helps meet The Code for Sustainable Homes etc.
• Even water distribution throughout the site, even at peak demand periods• Lower capital costs (potential savings from smaller pipework, water heating systems etc.)
• Reduced “peak demand”• Ideal for retro-fit or new build projects
• Low cost solution. Payback often within months• Help reduce “back splash” at basins
Available in nickel plated finish
2.5 Lpm Lime Green 4 Lpm Pink6 Lpm Grey 8 Lpm White
10 Lpm Yellow 12 Lpm Brown 15 Lpm Blue 18 Lpm Green
RP/ACC Valve
Combined Isolating Valve and Flow RegulatorOrder Codes: 15mm RP/ACC or 22mm RP/ACCWith access port on side of valve to allow removal of flow regulator cartridge (and optional strainer) without draining down system or breaking pipework (picture: opposite), for the purpose of flushing out the system on commisioning or changing the flow regulator cartridge to a higher or lower flow rate as required.
Available in 15mm or 22mm sizes and comes with colour coded cap to show the flow rate the valve is set to. Flow rates and colour-coding for both sizes are:
Optional strainer available on request. Red and/or Blue Handles for the valves available on request.
Combined Isolating Valves and Flow Regulators
Order Code: 15mm RP/ISO15mm combined flow regulating & isolating valve with integral flow regulator. Optional handle available on requestFlow rates from any of 4, 6, 8, 10, 12 or 15 LpmOptional strainer available on request. Red and/or Blue Handles for the valves available on request.
15mm RP/ISO Valve
WATER SAVING FLOW REGULATORS
ROBERT
PEARSON &
COMPANY
Water&
Energy Saving
Controls
ROBERT PEARSON & COMPANYPost Office House, Post Office Lane
Stockton, Warminster
Wiltshire BA12 0SE
Telephone: (01985) 850954
Facsimile: (01985) 850112
E-Mail: [email protected]
Website: www.robertpearson.co.ukPrinted October 2008
RP/GA
Flow Regulator InsertOrder Code: RP/GA
Shower Flow RegulatorOrder Code: RP/SFR/DW
MxF Housings for Tap TailsOrder Code: RP/DWSA/TTFR
Fit in your own 15mm(or 22mm) Compression
Ended Valves4, 6, 8, 10, 12, 15 or 18 Lpm
No plumbing simply screws inbetween shower head &
½" supply pipe6, 8, 9, 10, 12 or 15 Lpm
Simply screw on to tap tailsAvailable in ½”
6, 8, 9, 10 or 12 Lpm
Combined Aerator &Flow Regulator
Order Code: RP/CAAFRSimply replace existing tap
aerator with this unit6 or 8 Lpm
Combined Isolating Valve & Flow Regulator
With access port on side of valve to allow removal of flow regulator cartridge (andoptional strainer) without draining down system or breaking pipe-work (eg picturetop right).WRC approved. Identity label to clearly show flow rate of cartridge used.
Available in either 15mm or 22mm sizesFlow rates for either size can be any of: 4,6,8,10,12,15 or 18 litres per minute
Optional Strainer and/or handle facility available on request.
Order Code: RP/ACC VALVE
All these have integral flow regulators fitted. RP/CAAFR & RP/SFR/DW require no plumbing
••
••••
Even water distribution throughout the site
Lower capital costs (potential savings on smaller pipework & waterheating systems etc)Reduced "Peak Demand”
Ideal for retro-fit or new build projects
Low cost solution
Help prevent "back splash" at basins
Application Suggested Flow Rate Litres per minute (Lpm)
WC Cistern 6 or 8 LpmWash Basin 4, 6 or 8 LpmSink or Shower 10 or 12 LpmBath 15 or 18 Lpm
Available in nickel plated finish
Benefits
Application
Function
Up to 70% Water Savings at Taps and Showers etc
Outlets supplied by water with a minimum pressure of approx 1 bar (ie pumped/mains water supply)
Point of use regulators designed to provide constant and maximum flow rates at taps and showers etcirrespective of changes in demand or water pressure fluctuations between 1-10 bar.
RP/CAAFR RP/SFR/DW RP/DWSA/TTFR
RP/ACC VALVE
Z:\01 Job Files October 2008\Robert Pearson\Water Flow Regulators.cdr23 October 2008 10:58:56
Color profile: Generic CMYK printer profileComposite Default screen
January 2014
Combined CARE Insert (flow straightener) and Flow Regulator Mainly used for medical applications as the laminar flow does not aspirate air into the water. No plumbing required to fit. Simply replace existing tap aerator with this fitting. Order Code: RP/CAREFlow rates/colour-coding as follows: 1.9 Lpm Lime Green. 3.8 Lpm Blue. 5 Lpm Orange. 6 Lpm Black. 8 Lpm White.
½” MxF Chrome Tap Tail/Mixer & Flow Regulator Simply screw on to ½” inlet pipe thread to an appliance. Order Code: RP/DWSA/TTFRFlow rates/colour-coding as follows
Combined Aerator and Flow Regulator Aerators add air into the water as it leaves the tap in order to help reduce splashing when water hits the basin. No plumbing required to fit. Simply replace existing tap aerator with this unit.Order Code: RP/CAAFRFlow rates/colour-coding as follows: 1.9 Lpm Lime Geen3.8 Lpm Blue5 Lpm Orange
6 Lpm Black 8 Lpm White
½” Shower Flow Regulator Ideally fit this unit at the thermostatic mixing valve end of the flexi-hose. If fixed head shower, unscrew the showerhead, screw the flow regulator in and then re-fit the shower head. No plumbing required to fit.Order Code: RP/SFR/DWFlow rates/colour-coding as follows: 4 Lpm Grey6 Lpm Black 8 Lpm White 9 Lpm Orange
10 Lpm Blue 12 Lpm Red 15 Lpm Lime Green
1.4 Lpm Brown1.9 Lpm Yellow 2.5 Lpm Orange 3.5 Lpm Red-brown 5 Lpm Violet
6 Lpm Pink 8 Lpm Red9 Lpm Lilac10 Lpm Black12 Lpm White
Combined Spray and Flow Regulator Mainly used for applications where very low water consumption is required. Pressure compensating from 0.8 Bar – 5 Bar. No plumbing required to fit. Simply replace existing tap aerator with this fitting.Order Code: RP/SPRAYFlow rates/colour-coding as follows: 1.7 Lpm Light Grey. 2 Lpm Dark Grey. 2.5 Lpm Green. 3 Lpm Lilac. 3.5 Lpm Dark Blue. 4 Lpm Pink. 5 Lpm, Orange.
RP/CAAFR
RP/SFR/DW
RP/DWSA/TTFR
Flow Regulating Disc Insert Circular flow regulator insert (only) for your own valves (can be used with most 15mm or 22mm compression ended valves). Simply fit in to the tap/appliance side of your own valve.
Order Code: (15mm) RP/GA15mm flow rates available from: 4, 6, 8, 10, 12, 15, 18 LpmOrder Code: (22mm) RP/GA22mm flow rates available from: 8, 10, 12, 15, 18 Lpm
RP/GA
January 2016