Upload
hubert-green
View
216
Download
3
Embed Size (px)
Citation preview
Water Proof for Coaxial Cable Termination
1/2
Shield packing for cable fixing(effectively depend with cable size)
Shield packing for cable fixing.The vibration of the cable
always breaks this packing and shield wires of coaxial cable.
Water infiltration
Water
infiltration
No water proofing points(moving parts)
SURGE ARRESTORCOAXIAL TERMINATION
COAXIAL TERMINATION
2nd Step Shield with self bonding tape (>2mm thickness).Shielding of cable connection point:
Connect grounding cable to arrestor body.
1st Step
Point shielding and leveling: Use Self Bonding (autohesion) rubber tape, it pulls (stretch) until becomes thin and then wrapping. (Self bonding tape is possible stretch 1,000%)
2/2
Use a PVC protection tape, It pulls at 1st laying for fastens up the self bonding (autohesion) layer.Overlap the PVC tape to half width. 2nd to 3rd laying, it does usual wrapping method.The direction of the winding always ends on the side of ODU/ANT to prevent the infiltration of water.
Never use an Vinyl insulating tape !!. The tape which has a elasticity (soft) can not use. The PVC protection tape has only a few stretch margin and it has high resistance for outdoor use (compared with the usual vinyl insulation tape).
3rd Step Total Shielding: Use Self Bonding Tape, It pulls (stretch 100%) tape to ensure effective bonding (fusion, autohesion) and then wrap until sufficient thickness.
When there is a crack, use a few silicon shield for grounding cable.
Shield with self bonding tape (3mm thickness aprox.)ODU/ANT side
4th Step Protective Taping (3 layer) Cable tie
ODU/ANT side
The rubber fusion layer
Sample Information with Comments3M < Scotch > 130C Self Bonding (Autohesion) Tape
Water proof and Insulation
Note: It does an autohesion (fusion) when the tape is stretching (pulled). Generally, it winds in the 100 % pulled condition. It adjusts Stretch from 100 % to 1000 %, depending by the condition or status to use.
Caution: Vinyl or PVC tape doesn't have any water proof feature, only it has insulation and protection.
Properties
基材材質 MaterialEthylene-propylene rubber,
Butyl-rubber
色 Color Black
厚さ Thickness (mm) 0.76 mm
幅 Width (mm) 19, 25, 50, etc
長さ Long (m) 9.0 m
引張強さ Tensile strength (N/10mm) 13
伸び Stretch (%) 1,000 %
熱伝導性 Transcalency (W/m℃) 0.3
絶縁破壊の強さ Insulation strength (MV/m) 30
連続使用温度指数 Temperature index (℃) 90℃