Embed Size (px)
Citation preview
The products for water detection ...
The WD-x range is designed to detect water leaks in
localized spots with a WD-PS point sensor or in larger
areas with the WD-CS sensor cable. A WD-RS rain
water sensor is also available.
The water detection control modules WD-AMX are
specially designed to work with the range of WD-x
cable sensors. They are suitable for DIN rail mounting
in air handling units, power distribution units or
areas in general where leak detection is required.
They are fitted as standard with LED indication and
in operation or the presence of water the audible
alarm can be disabled by simply removing a jumper.
The output of the WD-AMX relay can be configured
with manual or automatic reset.
A relay output provides an alarm signal that can
be used for connection to a building management
system controller or to an array of remote alarm
signaling such as UI-AA1-F.
WD-PSWater detection sensor
WD-RSRain sensor
WD-CSWater leak sensor cable
WD-AMXWater leak alarm module
Sontay products for water leak detection
A complete range for easy integration with the Building Management System.
Water Detection
The detection of leaks
The Sontay system protects buildings and equipment from water damage through early indication of the presence of a leak. The range is designed for localised or zone detection. Where to use a water detection sensor• Pipe• Air handling units• Under Floor heating• Fluid leaks in a data centre Several types of sensitive elements are available for these applications and are compatible with the alarm unit, which provides a relay output for integration with building management systems using LED indication and audible alarm.
ALARM Controller
ALARM LED
SOUND ALARM Sen
sor
Det
ecti
on
Sontay is a market leading manufacturer and distributor of building measurement and control peripherals. The company provides a fast, professional and personal service, supporting businesses with reliable, durable and innovative products. This is backed
by a dedicated Customer Services Team to assist with product advice and technical support. Please visit www.sontay.com
Sontay Limited · Four Elms Road · Edenbridge · Kent · TN8 6AB
UK Rate +44 (0) 1732 861200 · International +44 (0) 1732 861225EXPERTS IN FIELD CONTROLS©2012 Sontay Limited. All rights reserved. E & OEInformation is subject to change without notice.
Water Detection
water damage through early indication of the onset of a leak.The Sontay water leak detection system protects against
Ref. Sontay Applications Page Catalogue
A WD-AMX Water leak alarm module
B WD-CS Water leak sensor cable
C WD-PS Water detection sensor
D WD-RS Rain sensor
!
DETECTION - ALARM - ACTION
WD-AMX
Water leak alarm module
WD-PS
Water detection sensor
WD-CS
Water leak sensor cable
WD-RS
Rain sensor
. . . experts in f ield controls
The products for water detection ...
The WD-x range is designed to detect water leaks in
localized spots with a WD-PS point sensor or in larger
areas with the WD-CS sensor cable. A WD-RS rain
water sensor is also available.
The water detection control modules WD-AMX are
specially designed to work with the range of WD-x
cable sensors. They are suitable for DIN rail mounting
in air handling units, power distribution units or
areas in general where leak detection is required.
They are fitted as standard with LED indication and
in operation or the presence of water the audible
alarm can be disabled by simply removing a jumper.
The output of the WD-AMX relay can be configured
with manual or automatic reset.
A relay output provides an alarm signal that can
be used for connection to a building management
system controller or to an array of remote alarm
signaling such as UI-AA1-F.
WD-PSWater detection sensor
WD-RSRain sensor
WD-CSWater leak sensor cable
WD-AMXWater leak alarm module
Sontay products for water leak detection
A complete range for easy integration with the Building Management System.
Water Detection
The detection of leaks
The Sontay system protects buildings and equipment from water damage through early indication of the presence of a leak. The range is designed for localised or zone detection. Where to use a water detection sensor• Pipe• Air handling units• Under Floor heating• Fluid leaks in a data centre Several types of sensitive elements are available for these applications and are compatible with the alarm unit, which provides a relay output for integration with building management systems using LED indication and audible alarm.
ALARM Controller
ALARM LED
SOUND ALARM Sen
sor
Det
ecti
on
Sontay is a market leading manufacturer and distributor of building measurement and control peripherals. The company provides a fast, professional and personal service, supporting businesses with reliable, durable and innovative products. This is backed
by a dedicated Customer Services Team to assist with product advice and technical support. Please visit www.sontay.com
Sontay Limited · Four Elms Road · Edenbridge · Kent · TN8 6AB
UK Rate +44 (0) 1732 861200 · International +44 (0) 1732 861225EXPERTS IN FIELD CONTROLS©2012 Sontay Limited. All rights reserved. E & OEInformation is subject to change without notice.
