WAREWASHING SOLUTIONS PTY LTD

PH:1300 217 411WWW.WAREWASHINGSOLUTIONS.COM.AU

Distributor

Are you looking to save costs in your catering facility this week?

We can reduce your staff costs on a labour intensive repetitive job and give you a far better result.

Your cutlery needs to be perfectly polished – your customers expect nothing less.

Warewashing Solutions is a leading supplier of commercial quality warewashing equipment

Effectively remove watermarks

Achieve a consistently high sheen

Reduce labour costs & free up your waiting staff

Remove the need for both purchase and disposal of paper towelling

Reduce towel laundry costs

Give a much faster cutlery cleaning turnaround rate

Eliminate cross-contamination from dirty cloths

This machine saves time, saves money, saves labour and produces an unbeatable shine!

How much time you can save if you don’t have to spend hours polishing your cutlery by hand.

Our machines cost from as little as $49 a week.

If you have any questions or would like to place an order, please do not hesitate to contact us at INFO@WAREWASHINGSOLUTIONS.COM.AU or Phone 1300 217 411

You will be surprised how much time and money you’re wasting on skilled staff standing around polishing your cutlery.

Our Cutlery Polishing units are designed for restaurants, kitchens, cafes and coffee shops with two clear intentions; unbeatable quality and cost saving.

QualityIt’s pretty easy for staff to get bored hand polishing cutlery, very often not doing the job very well leaving marks, streaks and wasting even more staff time fetching fresh cutlery when the guest complains!

Cutlery Polishers never get tired.

They just keep on going as long as you need them to, hitting an incredibly high quality level of perfect polishes without ever missing a spot or only doing half the job; and even better, they don’t leave damp dirty towels lying around after they’ve finished.

Hygiene benefit is that our dryer polishers sanitize at high temperature above 80 degrees C; the same temperatures used to sanitize in your dishwasher, This ensures that both the cutlery and granules meet sanitizing codes, whilst human hands and dirty polishing cloths can add bacteria, our higher temperatures makes sure that when the cutlery or items leaves the polisher, it’s virtually sterile!

Cost savingCutlery polishers are fast, and after the initial purchase are economical to run, saving you money in time and labour

Stop buying and disposing of all that polishing cloth. Our polishing granules last longer, are far more hygienic and do a better job!

Stop wasting wages on waiting staff polishing spoons!Larger restaurants may even be able to reduce the number of staff they need

Cut down on your cutlery stock! Our units process cutlery fast so it’s back out on the tables in no time.

Warewashing Solutions machines offer 120 day /600 hour Granule media replacement recommendation, saving on both consumable and servicing labour costs

Example 1 Example 2 Example 3

No of heads served per week 1000 1000 1000

Items of cutlery per head 4 6 8

Items of cutlery used per week 4000 6000 8000

No of man / wk hours to polish cutlery based on the industry standard of

500 per hour 8hrs 12hrs 16hrs

Cost per week to hand polish cutlery based on minimum wage of

$21.00 /hr$168.00 $252.00 $336.00

Cost to hire a mini polisher (per week) from $9 per day $ 63.00 $ 63.00 $ 63.00

Granulate costs average / week $ 5.00 $ 7.50 $ 10.00

Maintenance costs per week $ 3.00 $ 3.00 $ 3.00

Power costs at 500W per hour of use based on hours user per day $ 5.00 $ 7.50 $ 10.00

Total weekly cost of the polisher $ 76.00 $ 81.00 $ 86.00

Total savings per week $ 92.00 $ 171.00 $ 250.00

Total savings per year $ 4784.00 $8892.00 $13000.00

TAMAI dryer polisher factory recommendation for granule replacement is 120 days or 600 hours,

Giving maximum savings on granule and labour costs.

Warewashing Solutions Cutlery Polishers deliver consistent, top quality polish and shine every time.

What’s more it’s simple to use and removes all of those damp and unhygienic towels and polishing cloths from your environment entirely.

Take your clean and wet cutlery straight from the dishwasher and place it into the patented circular tank, , which is made to allow cutlery to virtually swim up and out of the machine. a food safe exit is designed to protect your cutlery from scratching.

The machine draws the cutlery through the heated dry grain granules; this removes out all the moisture, whilst gently rubbing off water marks and polishing silver or steel to incredibly high quality sheen.

The temperature creates a sanitizing stage on both cutlery and granules, killing bacteria. the cutlery travels with the vibrating granules to the top and passes out, maximizing time and temperature for hygiene and delivering the perfect knives, forks and spoons to your diners.

As you can see, it takes just a few seconds to place the cutlery in the machine; how long does it take your staff to hand polish it?

Whatever your volume of business we help all sizes of kitchens, restaurants, schools, hospitals, pubs, coffee shops and cafes save money and time;

Contact us today on 1300 217 411to speak to one of our knowledgeable team and work out how much simpler one of our units can make your working day!

RETAIL Price $7432 + GST

FEATURES

• Manufactured in High Grade Stainless Steel

• UV sanitizing remove bacteria

• Automatically dries, polishes, removes stains, smudges and lime marks

• optional stands,

• Ecologically friendly drying granules

AS – MP Star Lat Cutlery Dryer Polisher 2000 / hour

Capacity - 2000 pieces per hour

Dimensions 480(w) x 440(d) x 420(h)mm

Weight 34 kg

Power Supply 10 amp single phase 220V 50Hz

Structure Stainless Steel

Sanitising Germicidal Lamp (UV light)

Basket holder - included

Mobile trolley - optional extra (price below)

RETAIL Price $7432 + GST

FEATURES

• Manufactured in High Grade Stainless Steel

• High Temp sanitizing remove bacteria

• Automatically dries, polishes, removes stains, smudges and

lime marks

• optional stands, loading self and tray

• Ecologically friendly drying granules

MIG WS-TAM3000 Cutlery PolisherThe Bench top or stand model MIG Cutlery Polisher is precision designed to operate

in all volume service environments, polishing up to 3000 pieces of cutlery per hour. A

cutlery polisher is the perfect tool to reduce staff work load in busy settings, especially

during peak service hours.

The MIG is readily portable. Through the combination of drying granules, vibration,

and sanitizing heat, the MIG eaves cutlery with a beautiful spotless finish free of

bacteria and spots. The convenient tray allows for easy sorting and storage of goods.

Automatic model suited to small and Medium sized facilities.

Inside the machine there is a 100% stainless steel spiral tunnel containing the

granule media, an electrical element and a motor vibrator.

The cutlery is placed in the top and removed from the front.

Can be supplied with a support tray complete with cutlery basket.

Production rate: 3000 pieces/hour. Built entirely in stainless steel.

Sizes: 450x590x400 mm

Weight: 32 Kg.

Power supply: single phase 230V 50Hz

Absorption: 0.90 Kw Power circuit: 24V

Production: 2500/3000 pieces/hour

Supplied with: 1 load of granule media - Kg. 5

Optional Accessories:

cutlery basket support self, movable trolley, bench inlet Shute

Special Price $5990.00 + GSTAuto feed Unit - $9900 + GST

FEATURES

• Manufactured in High Grade Stainless Steel

• UV sanitizing remove bacteria

• Automatically dries, polishes, removes stains, smudges and lime marks

• optional stands,

• Ecologically friendly drying granules

WS-CPOL-7000 Cutlery Dryer Polisher 7000 / hour

Dimensions: 650 x 620 x 470 mm

Cutlery Polisher 230V 50/60 Hz 800W

Can be set up on a Table / bench

Capacity: up to 7000 pieces per hour

Fast to preheat (650W heater).

Stainless steel drum,

Granule capacity - 2.5 Kgs

UV Light used for sterilization

Drawer for holding cutlery catching tray

AUTO LOAD OPTION MACHINE AVAILABLE

PURCHASE Price $10,280 + GST

Indent item – normally 8-12 weeks from order

FEATURES

• Manufactured in High Grade Stainless Steel

• High Temp sanitizing to remove bacteria

• Automatically dries, polishes, removes stains, smudges and

lime marks

• OPTIONAL Cutlery collecting tray stand

• Ecologically friendly drying granules

JET WS-TAM6000 Cutlery PolisherThe free-standing JET Cutlery Polisher is precision designed to operate in high

volume service environments, polishing up to 7000 pieces of cutlery per hour. A

cutlery polisher is the perfect tool to reduce staff work load in busy settings,

especially during peak service hours.

With a lower shelf for storage and lockable wheels, the JET is readily portable.

Through the combination of drying granules, vibration, and hot air, the JET leaves

cutlery with a beautiful spotless finish free of bacteria and spots. The convenient tray

allows for easy sorting and storage of goods.

Automatic model suited to medium and large sized facilities. Inside the machine

there is a 100% stainless steel spiral tunnel containing the granule drying media, an

electrical element and a motor vibrator. The cutlery is placed in the top and removed

from the front.

Supplied on four wheels for each and functional positioning.

Can be supplied with an optional support stand complete with cutlery basket.

Production rate: 5/6000 pieces/hour. Built entirely in stainless steel.

Sizes: 700x600x760 mm

Weight: 80 Kg.

Power supply: single phase 230V 50Hz

Absorption: 0.90 Kw Power circuit: 24V

Production: 5/6000 pieces/hour

Supplied with: granule drying media Kg. 7

Accessories: cutlery basket support

Dries, polishes and removes lime scale stains from cutlery after washing.Fully automatic.Economy: saves on personnel costs and quick return of investment.Speed: hourly output of up to 3,000 pieces.Hygiene: the germicidal UVC-ray lamp sterilizes both the cutlery and the polishing product.Specs:Hourly production (pieces): 3000Loading:Motor power: 175 WElement power: 450 WUvc lamp power: 8 WFan power: 50 WExternal dimensionsWidth: 489 mm x Depth: 652 mm x Height: 412 mmNet weight: 43 KgNoise level (1m.): 70 dB(A) / Noise level (1m.) when loaded: 90 dB(A)Background noise: 25 dB(A)

RETAIL Price $9875 + GST

RETAIL Price $14,320 + GST

Indent item – normally 8-12 weeks from order

FEATURES

• Manufactured in High Grade Stainless Steel

• High Temp sanitizing to remove bacteria

• Automatically dries, polishes, removes stains, smudges and

lime marks

• OPTIONAL Cutlery collecting tray Stand

• Ecologically friendly drying granules

TORNADO WS-TAM12000 Cutlery PolisherThe free-standing TORNADO Cutlery Polisher is precision designed to operate in

high volume service environments, polishing up to 10000/12000 pieces of cutlery

per hour. A cutlery polisher is the perfect tool to reduce staff work load in busy

settings, especially during peak service hours.

Lockable wheels, the TORNADO is readily portable. Through the combination of

drying granules, vibration, and sanitizing heat, the TORNADO leaves cutlery with a

beautiful spotless finish free of bacteria and spots.

A convenient tray stand can allow for easy sorting and storage of goods.

Automatic model suited to large sized function centres or facilities.

Inside the machine there is a 100% stainless steel spiral tunnel containing the

granule media, an electrical element and a motor vibrator.

The cutlery is placed in the top and removed from the front.

Supplied on four wheels for each and functional positioning.

Can be supplied with a support stand complete with cutlery basket.

Production rate: 10/12000 pieces/hour. Built entirely in stainless steel.

Sizes: 850x700x820 mm

Weight: 98 Kg.

Power supply: 400V 3P+N+E / 50Hz

Absorption: 1.5 Kw Power circuit: 24V

Production: 10/12000 pieces/hour

Supplied with: Granule drying media Kg. 10

Optional Accessories: cutlery basket support stand

RRP Price $2250.00 + GST

Glass Polishers dry and polish glasses taking the time and eff ort out of hand

polishing, providing a cleaner and more hygienic finish in a few seconds. The

brushes are made of natural and absorbent

fibres, adaptable to different glasses and cups increasing the efficiency of the

drying & polishing process.

Removing water stains and marks through a combination of hot air, rotation and

the drying action of the

rollers, Glass Polishers leave glassware crystal clean. With an attractive and

durable stainless steel

finish, the GPol1 is easy to keep clean and light enough to be easily portable.

Voltage: 220-240V AC50/60Hz 1150-

1350W 5.4A

Capacity: up to 350 glasses per hour

Dimensions: 325 x 300 x 500mm

Weight: 15.5kgs

Air Flow: 164 CFM

Hot Air Temp: 55-60C

PHONE 1300 217 411 or

Email:info@warewashingsolutions.com.au

We work with Silver Chef, Flexi Commercial and ProspaPay as all companies offer

a different way of financing.

1300 customer contact number

Parts-stocked Service vehicles

Factory Trained Technician

National Technical & Spare Parts Support

Operational Training on-site available

Preventative Maintenance services

Granule replacement program

PHONE 1300 217 411 or

Email:info@warewashingsolutions.com.au