Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
BHS1.com
BHS manufactures standard and custom equipment for a variety of material handling needs. BHS Warehouse Equipment is both durable and reliable, providing customers with dependable solutions.
Warehouse Equipment
Panel Carts
Lift Tables Order Picking Carts Parallel Reel Payouts Automotive Battery Racks
Forklift Work PlatformBin TippersShipping & Receiving Desks
High Value Carts
2 BHS1.com
LT
BHS Scissor Lift Tables (LT) vertically position materials at comfortable heights for improved ergonomics and productivity. Scissor Lift Tables are available in many standard sizes and capacities to lift and position loads weighing up to 6,000 lb (2722 kg) to heights up to 72” (1829 mm).
Lift Tables
Scissor Lift Tables
• Heavy-duty, formed steel construction for added reliability
• 120 V ac / 1 ph / 60 Hz internal power unit standard on LT2K and LT4K models; 230/460 V ac / 3 ph / 60 Hz internal power unit standard on LT6K models
• Contoured scissor legs for improved precision, travel, and stability
• Floor mounting tabs with 0.75” (19 mm) diameter holes (anchors and hardware not included)
• Maintenance chocks included to lock scissors
• Full width through pivot shafts for stability throughout the travel range
• Durable, sealed and shielded roller bearings for maximum capacity and longevity
• Durable powder coat finish with yellow tabletop to improve visibility and safety
• Closed hydraulic circuit
• Heavy-duty braided wire hydraulic lines for maximum burst strength and longevity
• Hardened chrome piston rod and honed cylinder provide added column strength and cylinder sealing
• Equipped with thermal overload protection and velocity fuses for additional safety
• Hydraulic components contained within the lift table for maximum safety, floor space, and convenience
• NEMA floor toggle switch included for easily accessible up/down function control
SMLT
MMLT
BHS Self-Leveling Mobile Lift Tables (SMLT) are fully adjustable and improve productivity and efficiency by automatically leveling during loading and unloading to prevent physical over-exertion of personnel.
BHS Manual Mobile Lift Tables (MMLT) feature a toggle foot pedal, allowing the operator to lift and position heavy loads with ease. The MMLT Series maximizes productivity by positioning loads at a convenient work height to minimize operator fatigue. The MMLT also provides the mobility to position the unit where it is needed.
Manual Mobile Lift Tables
Self-Leveling Mobile Lift Tables
• Durable powder coat finish
• Heavy-duty, formed steel construction for added reliability
• Two swivel with brake and two rigid 6” (152 mm) corrosion-resistant urethane casters
• Angled handle for ease of movement and comfort while traveling with load
• Maintenance retainers included for locking scissors
• Durable, long life, steel cam rollers
• Dual heavy-duty springs keep load level and at a safe working height
• Adjustable spring tension with labeled graduations for quick and easy adjustments
• Durable powder coat finish
• Heavy-duty, formed steel construction for added reliability
• Two swivel with brake and two rigid 4” (102 mm) corrosion-resistant urethane casters
• Angled handle with adjustable grip for ease of movement and comfort while traveling with load
• Maintenance retainers included for locking scissors
• Durable, long life, steel cam rollers
• Hydraulic components contained within the lift table for maximum safety, floor space, and convenience
• Scissor legs designed for maximum lift height and collapsibility
• Integral foot pedal for ambidextrous operation
1.800.BHS.9500 3
• Durable powder coat finish
• Heavy-duty, formed steel construction for added reliability
• Two swivel with brake and two rigid 8” (203 mm) corrosion-resistant urethane casters
• Angled handle for ease of movement and comfort while traveling with load
• Maintenance retainers included for locking scissors
• Durable, long life, steel cam rollers
• Enclosed and protected battery compartment
• Closed hydraulic circuit
• Thermal overload protection
• Adjustable lowering speed valve
• 120 V ac automatic, waterproof charger with LED status light indicator, reverse-polarity protection, and 2’ (0.61 m) power cable
• LED display battery discharge indicator with hour meter
• Easily accessible up/down toggle switch
• Dual scissor legs designed for maximum lift height and collapsibility
• DC motor powered by (1) 12 V dc sealed extended life “maintenance free” battery
• Equipped with on/off keyswitch and removable key to lock out machine from unauthorized personnel
PMLT
Reference Literature PL-4600 and PL-4700 for more information.
The Powered Mobile Lift Tables (PMLT) are compact with dual scissor legs, allowing one operator to effortlessly lift heavy loads up to 75” (1905 mm) high. The PMLT is battery-powered, featuring a simple push-button control for quick and easy lifting. The PMLT Series maximizes productivity by positioning loads at a convenient work height to minimize operator fatigue. The PMLT also provides the mobility to locate the unit where it is needed.
Powered Mobile Lift Tables
Tilt Tables
TLT
Tilt Tables (TLT) prevent physical strain and fatigue from lifting, bending, and reaching by tilting loads to a comfortable working height. The TLT features loading access from three sides, a self-contained hydraulic power unit, and convenient push button controls which make operation effortless. These units consume a minimal footprint while providing maximum efficiency.
Tilt Tables
• Heavy-duty, formed steel construction for added reliability
• Floor mounting tabs with 0.75” (19 mm) diameter holes (anchors and hardware not included)
• Maintenance chocks included to lock unit
• Durable powder coat finish with yellow tilt-top to improve visibility and safety
• Closed hydraulic circuit
• Heavy-duty braided wire hydraulic lines for maximum burst strength and longevity
• Hardened chrome piston rod and honed cylinder provide added column strength and cylinder sealing
• Equipped with thermal overload protection and velocity fuses for additional safety
• Hydraulic components contained within the tilt table for maximum safety, floor space, and convenience
• Tilts up to 45°
• NEMA floor toggle switch included for easily accessible up/down function control
• Lowered height ranges from 3.375” to 3.5” (86 mm to 89 mm) and raised height from 38.375” to 38.5” (975 mm to 978 mm)
• Models available with 2,000 lb or 4,000 lb (907 kg or 1814 kg) capacity
4 BHS1.com
PMTLT
The Powered Mobile Tilt Table (PMTLT) improves productivity and ergonomics by tilting loads up to a comfortable working height. A hydraulic power unit is contained and guarded within the unit and features a push button control. The PMTLT is equipped with two casters and polyurethane load rollers for effortless maneuverability and is available with fork over or straddle style operation.
Powered Mobile Tilt Tables
• Heavy-duty, formed steel construction for added reliability
• Angled push bars for effortless maneuverability
• Maintenance chocks included to lock unit
• Durable powder coat finish with yellow tilt-top to improve visibility and safety
• Closed hydraulic circuit
• Heavy-duty braided wire hydraulic lines for maximum burst strength and longevity
• Hardened chrome piston rod and honed cylinder provide added column strength and cylinder sealing
• Equipped with thermal overload protection and velocity fuses for additional safety
• Hydraulic components contained within the tilt table for maximum safety, floor space, and convenience
• Tilts up to 90°
• Two 8” (203 mm) diameter x 2” (51 mm) wide locking, swivel, polyurethane casters and polyurethane load rollers for transport
• Push button control with a caddy
• 3.375” (86 mm) lowered height and 40” (1016 mm) raised height
• Models available with 2,000 lb, 4,000 lb, or 6,000 lb (907 kg, 1814 kg, or 2722 kg) load capacity
GR-4060
Racks
BHS Sheet Material Racks (SMR) are the perfect solution for storing and transporting large, heavy sheets of material like glass or granite slabs. The angled back and deck along with the anti-skid rubber surface help to prevent material from tilting out. These racks are equipped with removable side arms for stacking extra-long material and four-way fork pockets for convenient transport and positioning.
• Heavy-duty, steel tube construction for added reliability
• Durable powder coat finish
• Angled back and deck for safe storage
• Anti-skid rubber surface helps to prevent material from tilting out
• Four-way fork pockets
• 8,000 lb (3629 kg) load capacity
• Stackable up to 3 units (contact factory for capacities when stacked)
Sheet Material Racks
BHS Ground Racks (GR) provide a single source for storing and transporting materials such as conduit, tubes, sheet material, panels, and bagged material for manufacturing or landscaping. These versatile Ground Racks are equipped with two-way fork pockets, mounting feet, and removable A-frame or square restraints.
• Heavy-duty, formed steel construction for added reliability
• Durable powder coat finish
• Removable A-frame or square restraints
• Mounting feet for bolting to the floor
• 8,000 lb (3629 kg) load capacity
Ground Racks
(2) SMR-4896 stacked
1.800.BHS.9500 5
PC-2448
Material Carts
• Heavy-duty steel construction for added reliability
• Plywood deck is carpeted to protect load from scratching and abrasion
• Removable handles make loading and unloading materials easier
• Two rigid and two swivel 6” (152 mm) casters
• Durable powder coat finish resists rust and scratches
BHS Panel Carts are ideal for transporting sheets and panels of material such as drywall, plywood, folding tables, office cubicle partitions, and rolled goods. Panel Carts feature a steel frame with a carpeted deck and casters for maneuvering up to 1,000 lb (454 kg) of material.
Panel Carts
CT-8
Cylinder Transport Equipment
• Heavy-duty welded steel frame used to transport industrial cylinders
• Easily maneuvered anywhere on jobsite
• Two swivel with brake and two rigid 6” (152 mm) polyurethane casters
• Two-way fork pockets offer alternate means of transport
• Formed retainer bars keep cylinders in place while in transit and are quickly released for access
• Hinged steel bars are pin-secured between compartments to hold cylinders in place
The BHS Cylinder Transport (CT) provides safe and efficient handling of industrial, compressed gas cylinders. The CT securely stores cylinders and can be transported by way of fork pockets or easily maneuvered by casters. Capacity varies depending on the size of the cylinders.
Cylinder Transport
• Heavy-duty welded steel cage used to transport industrial cylinders
• Easily maneuvered anywhere on jobsite
• Two swivel with brake and two rigid 6” (152 mm) polyurethane casters
• Two-way fork pockets offer alternate means of transport
• For optimum security, door hinges are welded and padlockable with strike protector (padlock not included)
Cylinder Transport CageThe BHS Cylinder Transport Cage (CTC) is a heavy-duty formed and welded cage used to securely store and transport small industrial cylinders, like propane or propylene. The side walls and door are comprised of thick gauge expanded metal.
• Heavy-duty welded steel frame used for industrial cylinder storage
• For optimum security, door hinges are welded and padlockable with strike protector (padlock not included)
• Fork pockets aid in relocation of unit
• Pitched roof keeps unwanted elements from damaging product and provides additional height clearance at the peak
Cylinder Transport StorehouseThe BHS Cylinder Transport Storehouse (CTS) is a heavy duty formed and welded frame providing a rigid and secure storehouse for industrial cylinders or any other valuable items. The CTS is modular and can be expanded as your cylinder needs or capacity increase.
CTC-6
CTS-2
6 BHS1.com
BS-ABR-C
Industrial Storage
• Structural, welded steel frame and shelves hold up to 96 batteries
• Durable powder coat finish resists both acid and scratches
• Easily supports lawn mower batteries to commercial batteries
• Fits easily under pallet racks
• Improves workflow with inclined shelves to ensure stock rotation
• Front and side guide rails secure batteries
• Phenolic casters allow mobility and will not mark floors
• Locking floor brake prevents unwanted movement of the unit
• Functions as display in showroom or as storage in work area
• 2.25” (57 mm) face for pricing and labeling
The BHS Automotive Battery Rack (BS-ABR-C) is fully assembled and virtually maintenance-free, requiring no shelf adjustments or bolt retightening. Casters allow the rack to display almost anywhere and will not mark floors. The clean design allows for live product presentation while providing optimal space utilization.
Request Literature PL-3400 for more information.
Automotive Battery Rack
Forklift Work Platform
The BHS Forklift Work Platform (FWP) securely attaches to a forklift to lift an individual for overhead maintenance tasks, such as changing light bulbs and conducting inventory.
• Platform Deck features anti-skid surfacing
• 42” (1067 mm) high guard railing with a 4” (102 mm) toe kick to contain operator and tools on the platform
• 66” (1676 mm) high mast guard with expanded metal for optimal visibility
• Operator gate with latch that can be padlocked (padlock not included)
• Two safety harness attachment points
• Powder coated “Safety Yellow” for high visibility
• Hook & Chain mast restraint offers additional safety and can be mounted on left or right side
• Fork Tine Restraint locks the platform to the forks using an over-sized quick-disconnect hitch pin so the platform is unable to slide off the forks, can be mounted on either left or right side FWP-3648
BHS Industrial Shelving (IS) is open style, industrial grade, steel shelving. This highly functional storage solution features fixed height shelves and is perfect for stockrooms, machine shops and warehouse settings. Custom-built models are also available.
• Heavy-duty construction for added reliability with large foot pads that protect flooring
• 72” (1829 mm) width shelving is standard and 36” (914 mm) height between shelves on multi-tier shelving
• Single-tier: 500 lb (227 kg) capacity; Multi-tier: 800 lb (363 kg) capacity per shelf
• Durable powder coat finish resists both acid and scratches
Industrial Shelving
IS-3
1.800.BHS.9500 7
HVC-3260-HD
The High Value Cart (HVC) is a portable and secure storehouse that protects valuable tools, equipment, and supplies from theft while still allowing easy access for authorized personnel. This reliable storage unit is easy to transport and reposition between work sites. All models are equipped with phenolic casters for moving lighter loads across short distances and fork pockets for heavier loads and longer distances.
• Two swivel with brake and two rigid 6” (152 mm) phenolic casters and push bar for easy maneuvering
• Front fork pockets and four top-mounted lifting eyes for lifting and transporting unit
• Two rigid 12GA steel shelves are adjustable in 3” (76 mm) increments
• Door slabs are hinged in three locations, open 180°, and feature pull handles
• Padlockable with strike protector to guard assets from theft (padlock not included)
• Heavy-duty models feature increased material thickness for extra capacity and security
High Value Cart
OPC3648
• Heavy-duty steel construction for added reliability
• Four shelves for product placement are standard
• Two rigid and two swivel casters
• Side and rear edges on shelves contain contents during transport
• Durable powder coat finish resists both acid and scratches
• 17 7/8” (454 mm) height between shelves
BHS Order Picking Carts (OPC) are ideal for processing orders and moving merchandise. Save time unloading packages and parts with the OPC, which is equipped with fork pockets for lifting and transporting the cart with a lift truck.
Order Picking Cart
Shipping & Receiving
HVC-2026-WS shown without casters
The High Value Cart - Work Station (HVC-WS) is a secure storehouse for protecting valuable tools, equipment, and supplies as well as a functional computer desk. The compact design provides reliable storage and can be easily transported as all units are outfitted with phenolic casters.
• Two swivel with brake and two rigid 4” (102 mm) phenolic casters and push bar for easy maneuvering
• Two rigid 12GA steel shelves
• Door slabs are continuously hinged and open 180°
• Keyed cam lock to guard assets from theft (lock set included)
• Six outlet power strip included
• 200 lb (91 kg) capacity self-closing keyboard tray with two rubber grommets
• Top shelf fitted with cushioned anti-slip safety mat
High Value Cart - Work Station
OPC4040 OPC4242 (shown with cantilever option)
8 BHS1.com
The Shipping/Receiving Desk (SRD) is a fully adjustable packing station, available in flush or left- or right-hand oriented models with a variety of modular features for optimized ergonomic use. The SRD improves access to essential order-filling supplies, such as barcode scanners, shipping labels, and computer monitor. By matching the specifications of a packing desk to the workforce, facility managers can realize powerful ergonomic benefits, with associated productivity increases.
• 1/4” (6 mm) thick formed steel frame and 12GA formed steel shelves provide a rigid, high capacity desk
• One fixed lower shelf (500 lb / 227 kg capacity), one fixed counter top (500 lb / 227 kg capacity) and two adjustable shelves (350 lb / 159 kg capacity)
• Shelves are vertically adjustable in 3” (76 mm) increments and dividers are horizontally adjustable in 2” (51 mm) increments
• Counter cut-outs available on left or right to accommodate operator’s handing and are outlined in heavy-duty vinyl edging to eliminate sharp edges
• Drop-in scale tray is equipped with 1.5” (38 mm) diameter rubber grommet (not included on model SRD-FH)
• Durable powder coat finish with stainless steel counter top
• Detachable monitor mount and keyboard tray can be mounted on either left or right with multiple vertical adjustment points
• Arms feature two lateral pivot points and tilt function to ergonomically position a screen and keyboard (28” / 711 mm full extension)
• 48” (1219 mm) fluorescent light fixture with rapid-start ballast, T8 bulb, removable lens, and 10’ (3.05 m) cord
• Custom lasered logo can be added to the exterior shelf plates
• Detachable, steel supply caddy with multiple compartments for basic office supplies mounts to either the left or right hand side of the platform top with included hardware (36” L x 3.5” W x 4.75” H / 914 mm x 89 mm x 121 mm)
• Detachable, steel scanner gun caddy fits most scanners and mounts to either left or right hand side on either the front or side of desk with included hardware (3.875” L x 3.5” W x 4.75” H / 98 mm x 89 mm x 121 mm)
• Paper Roll Bar is designed to hold a 24” (610 mm) paper roll, this right- or left-handed assembly, formed-steel bar mounts at any position on the vertical frame with included hardware (25” L x 1” W / 635 mm x 25 mm)
• Label Roll Bar is an adjustable formed-steel bar that holds rolls of labels or paper, mounts to center of upper shelves with 2” (51 mm) lateral adjustment points included hardware (28.5” L x 0.75” W / 724 mm x 19 mm)
• Power Module mounts to rear of platform top and includes 8 receptacles, 15 A 120 V AC NEMA 5-15P plug, aluminum housing, and resettable circuit breakers for overload protection (48” L x 3.5” W x 2” H / 1219 mm x 89 mm x 51 mm)
SRD-LH
Shipping/Receiving Desk
1.800.BHS.9500 9
Bin Tippers
DM1800
Reference Literature PL-5300 for more information.
Dumpmaster® Bin TipperDumpmaster® Bin Tippers are the ultimate solution to empty bins and drums weighing up to 660 lb (300 kg) at virtually any height. The tipping action of a Dumpmaster® is one of the safest, most efficient, and easiest to use systems in the world. The Dumpmaster® is the workhorse of the Simpro line and has been widely used in Australasia for the past 25 years.
• Suits popular bin sizes 21 gal (80 L), 32 gal (120 L), 36 gal (140 L) and 63 gal (240 L), with no adjustment
• Industrial grade galvanized frame
• Indoor or outdoor use
• Standard tipping heights from 27” (700 mm) to 70” (1.8 m) but can be built economically to any height
• Custom cradles available to suit other bins and drums
• Available with 1-phase, 3-phase, or battery power packs; battery-powered tippers have a sealed battery and an industrial-quality ‘float’ charger built in
• 4” (100 mm) casters, two with brakes
• 660 lb (300 kg) load capacity
MT1600
Reference Literature PL-5500 for more information.
Multi-Tip® Bin TipperThe Multi-Tip® Bin Tipper is everything a bin tipper should be: safe, easy to use, versatile, and efficient. Perfect for: schools, factories, recycling centers and more. The Multi-Tip® takes all the strain out of emptying bins, making it a safe and easy operation.
• Suits popular bin sizes 21 gal (80 L), 32 gal (120 L), 36 gal (140 L) and 63 gal (240 L), with no adjustment
• Durable powder coat frame
• Empties bin in 20 seconds
• Lockout key and two-hand controls for safety
• Indoor or outdoor use
• 63” (1.6 m) maximum tipping height
• Custom cradles available to suit other bins and drums
• Available with 1-phase, 3-phase, or battery power packs; battery-powered tippers have a sealed battery and an industrial-quality ‘float’ charger built in
• 5” (125 mm) casters, two with brakes
• 330 lb (150 kg) load capacity
EZI-MT
Reference Literature PL-5400 for more information.
Manual Bin TipperDesigned for low volume, light duty applications, the Ezi-MT is perfect for small businesses, schools, cafes, offices and local councils. The economically priced Ezi-MT manual bin tipper takes the strain out of emptying bins, and makes it a safe and easy operation.
• Suits popular bin sizes 21 gal (80 L), 32 gal (120 L), 36 gal (140 L) and 63 gal (240 L), with no adjustment
• Durable powder coat frame
• Heavy duty winch operated
• No electrical or hydraulic components to service
• Comes in knocked down kit form, substantially minimizing freight costs and emissions due to transportation
• Indoor or outdoor use
• 59” (1.5 m) maximum tipping height
• 4” (100 mm) casters, two with brakes
• 143 lb (65 kg) load capacity
10 BHS1.com
PRP-1 (cable not included)
R-STAND with optional casters
R-4
RN-1
Reference Literature PL-4900 for more information.
ReelsBHS Reels are designed to store cable, wire, rope, hose or tubing without tangling, and are available in a variety of compartment configurations and compartment widths. Reels are ideal for use with Reel Stands, which hold up to five independently spinning reels, or these items can be ordered together in the form of one unit—the Parallel Reel Payout (PRP).
• Heavy-duty steel construction for added reliability
• 44.75” (1137 mm) diameter
• Compartments have predrilled arbor holes to accommodate a variety of wire gauges (0.75”–1.12”)
• Durable powder coat finish
• 0.5” (13 mm) hub plates for maximum capacity
• Hub plates feature through holes for locking multiple compartments together
The BHS Parallel Reel Payout (PRP) simplifies cable pulling with free-spinning, multi-compartment reels, providing an even payout. The PRP is equipped with four-way fork pockets for convenient transport and optimal positioning of the unit. The PRP is available in several models with various reel combinations to hold multiple cables on one master unit. Optional casters allow the PRP to be maneuvered manually (pictured).
Electrical Equipment
Parallel Reel Payout
• Heavy-duty steel construction for added reliability
• Four-way fork pocket design enables transporting from the ends or sides of the unit by pallet truck or forklift, allowing optimum positioning (pallet truck not compatible with casters option)
• 2” (51 mm) solid steel center shaft
• Shaft safety locks equipped with locking pin
• Free-spinning compartments provide an even payout
• Individual hub locking to prevent unwanted payout when fewer cables are required
• 2” x 4” x 0.25” (51 mm x 102 mm x 6 mm) wall tube base frame design for maximum durability
• 0.75”, 1”, and 1.13” (19 mm, 25 mm, and 29 mm) arbor holes for a variety of wire gauges
• 0.75” (19 mm) UHMW alignment strips for center shaft prevent wear of components
• 0.5” (13 mm) hub plates for maximum capacity
• Narrow models feature a shortened base frame designed to fit 34” (864 mm) minimum door openings for use inside an existing facility or new construction
Reference Literature PL-4900 for more information.
Reel StandsBHS Reel Stands make up the base frame of a Parallel Reel Payout (PRP), which is designed for high-capacity cable storage and ensures that cables will not become tangled during payout. Reel Stands are designed to hold up to five free-spinning Reels.
• Heavy-duty steel construction for added reliability
• Four-way fork pocket design enables transporting from the ends or sides of the unit by pallet truck or forklift, allowing optimum positioning (pallet truck not compatible with casters option)
• 2” (51 mm) solid steel center shaft
• Shaft safety locks equipped with locking pin
• 2” x 4” x 0.25” (51 mm x 102 mm x 6 mm) wall tube base frame design for maximum durability
• 0.75” (19 mm) UHMW alignment strips for center shaft prevent wear of components
• Narrow models feature a shortened base frame designed to fit 34” (864 mm) minimum door openings for use inside an existing facility or new construction
Reference Literature PL-4900 for more information.
1.800.BHS.9500 11
ORL (spool not included)
Reel Handler Attachment
• Intended for use with lift trucks of sufficient capacity
• Safety chain attaches to the mast or fork, secured via slip hook with spring-loaded clasp to ensure engagement
• Removable front reel stop for easy placement of reel onto device
• Front reel stop can be installed in one of five positions for best reel containment
• Fork pockets are equipped with tapered nose to allow rolling of reels onto the attachment
• Anti-slide stops are built into the rear fixed reel stop to keep reel contained
• Durable powder coat finish resists both acid and scratches
BHS Reel Handler Attachment (RHA) can be used for lifting, transporting and loading reels into racking designed for storage or dispensing of product from the reel.
Overhead Reel LifterThe BHS Overhead Reel Lifter (ORL) can be used for lifting, transporting and loading reels into racking when lifting the reel from the bottom is not possible.
• Intended for use with lift trucks of sufficient capacity
• Safety chain attaches to the mast or fork, secured via slip hook with spring-loaded clasp to ensure engagement
• Features dual load beams to accommodate 24” and 32” (610 mm and 813 mm) load centers
• “Keyhole” chain-link slots on each beam allow quick adjustment to 28”, 34”, or 40” (711 mm, 864 mm, or 1016 mm) wide span
• Wide throat hooks accommodate up to 4.25” (108 mm) carrier axles and allow for easy engagement and disengagement
• Storage tray conveniently houses the hook and chain assemblies when not in use
• Durable powder coat finish resists both acid and scratches
RHA
RHA (spool not included)
CC-5K (conduit not included)
Reference Literature PL-5600 for more information.
The slim design of the Conduit Carrier Cart (CC) is great for narrow aisles, where a forklift simply cannot fit. The heavy-duty base frame provides the maximum capacity while taking up a minimal footprint, leaving valuable floor space available for the next project. The locking rigid casters prevent unwanted load movement, while the swivel casters and welded handles make transportation effortless.
Conduit Carrier Cart
• Heavy-duty steel square tubing base frame with added spanners for extra capacity
• Four formed and welded handles make moving a fully-loaded cart easy
• Two steel tie-down plates for strapping and securing a load
• Two 6” (152 mm) swivel, phenolic casters provide effortless maneuverability throughout a jobsite
• Two 8” (203 mm) rigid, phenolic casters feature brake to prevent unwanted load movement
CG1
The Electrical Conduit Gauge (CG1) is used to measure the inside diameter of steel and aluminum conduit ranging in size from 0.5” to 4” (13 mm to 102 mm) diameter.
• Made of stainless steel with laser-engraved markings for long service life
• 0.5” (13 mm) diameter hole at end for hanging or attachment to racking
• Gauge simply inserts into end of conduit and corresponding reference line indicates size
Electrical Conduit Gauge
P.O.Box28990•St.Louis,MO63132USA•1.800.BHS.9500•Fax:314.423.6444•Email:[email protected]•Web:BHS1.com Specifications are subject to change without notice. ©2015 Battery Handling Systems Inc. St. Louis, MO Data Sheet: PL-4000 12/15
Structural Barrier Rail (SBR) Structural Bollard (SB) Custom Bollard (CB-NS)
BHS Structural Barriers are highly visible safety essentials used to prevent unwanted vehicle and pedestrian access and to protect people, walkways, buildings, and equipment against harm or damage.
Reference Literature PL-3300 for more information.
Structural Barriers
Yard RampThe Yard Ramp (YR) is a portable ground-to-truck ramp that enables safe loading and unloading of freight where dock access is not present. The YR is equipped with solid rubber tires for transporting the unit using either the included fork clamp or optional tow bar.
Request Literature PL-5700 for more information.
YR-8436-16
• Heavy-duty, all steel construction for added reliability
• Solid steel approach plates transition to open steel grating for maximum traction and durability
• 8” (203 mm) high steel curbs
• 36’ (10.973 m) ramp provides gradual transition from ground to truck
• Hydraulic hand pump lifts ramp for positioning on and off of the truck tailgate
• Safety chains secure ramp to truck when engaged
• 6’ (1.829 m) flat level off at the trailer end of the ramp enables handling higher loads while also clearing the entry height of the trailer
• Two 16” (406 mm) diameter x 4” (102 mm) wide solid rubber tires for maneuvering unit
Ramps
DR-8430-16
Dock Ramp
• Designed for standard height loading docks
• Heavy-duty, all steel construction for added reliability
• Solid steel approach plates transition to open steel grating for maximum traction and durability
• 8” (203 mm) high steel curbs
• Two anchors secure ramp at base where ramp meets ground (not included)
The Dock Ramp (DR) is a stationary dock-to-ground loading ramp. The gentle slope of the 30’ (9.144 m) long ramp makes navigating forklifts easy while loading and unloading.