Wall Organizers - WeAllSew

free pattern

• BY HEIDI PRIDEMORE • FINISHED SIZES: 4”, 6” & 10” DIAMETER

Spring SongWall Organizers

BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM

SAMPLE KEY/SKU QTY CUT CUT PIECES VIA WOF

BLOCK ASSEMBLY PROJECT USES PRECISE 1/4” SEAMS. TEST YOUR SEAM ALLOWANCE BY CUTTING (2) 2-1/2” X 5” RECTANGLES. STITCH THEM TOGETHER ALONG THE 5” LENGTH. AT THE MIDPOINT, MEASURE ACROSS THE UNIT. IT SHOULD BE EXACTLY 4-1/2” WIDE. IF NOT, ADJUST YOUR SEAM ALLOWANCE AND REPEAT.

A

E

G

B

C

D

F

H

Tiles10371-08Gray

Snowflake10376-13Dark Gray

Snowflake10376-82 Sky Blue

Snowflake10376-11Navy

Tiles10371-30 Yellow

Tossed Medallions10374-08 Gray

Stitches10375-42Dark Lime

Tiles10371-01 Peach

You will also need:• (1) 4” embroidery hoop• (1) 6” embroidery hoop• (1) 10” embroidery hoop• Glue Gun and Glue sticks

(1) 7” square.

(1) 2” x 8” strip.(1) 2” x 14” strip.

(1) 3” x 6” strip.(1) 2” x 6” strip.

(1) 2” x 10” strip.

(1) 7” square.

(1) 9” square.(1) 13” square.

(1) 3” x 6” strip.(1) 2” x 6” strip.(1) 4 ½” x 9” strip.

(1) 13” square.

Fat 1/4

1/2 yd

Fat 1/4

Fat 1/4

Fat 1/4

1/8 yd

Fat 1/4

1/8 yd

A

FOLD

B

C

1. Trace and cut out the (3) templates on the drawn line.

Small Organizer Assembly2. Fold the 7” A square in half, place the Small Organizer Template on top of the folded fabric, aligning the edge marked “FOLD” with the folded edge of the square. Trace the shape onto the fabric and cut on the drawn lines through both layers of fabric to make the Background Circle.

3. Repeat Step 2 with the 7” B square to cut the Pocket Circle.

5. Fold (1) 2” x 8” C strip in half, lengthwise and press to make the Pocket Binding.

6. Align the raw edges of the C Pocket Binding strip with the folded edge of the B Pocket Circle.

7. Using your favorite binding method, add the Binding Strip to the pocket edge. Trim the Binding Strip even with the pocket edge to make the Pocket.

8. Position the Pocket on top of the A circle with the right side up on both pieces, aligning the raw edges on both pieces. Using a 1/4” seam, sew the two pieces together to make (1) Small Organizer Unit.

9. Separate the two hoops of the 4” Embroidery Hoop. Place the outer ring on top of the Small Organizer Unit, centering it. Pick up both the outer ring and the Small Organizer Unit and place them over the inner ring and push the three layers together to make the Small Organizer.

10. Flip the hoop over to the back. Fold the fabric raw edges around the inner ring and glue in place using a glue gun to complete the Small Organizer.

SMALL ORGANIZER FINISHED SIZE: 4” diameter

4. Fold the B Pocket Circle circle in half, wrong sides together and press to make the Pocket Unit.


MEDIUM ORGANIZER FINISHED SIZE: 6” diameter

FOLD

D

F

“FOLD”

“FOLD”

Medium Organizer Assembly11. Fold the 9” D square in half, place the Medium Organizer Template on top of the folded fabric, aligning the edge marked “FOLD” with the folded edge of the square. Trace the shape onto the fabric and cut on the drawn line to make the Background Circle.

12. Place the Medium Organizer Template on top of the 4-1/2” x 9” F strip, aligning the edge marked “FOLD” with the straight edge of the rectangle. Note: You will not fold this piece. Trace the shape onto the fabric and cut on the drawn lines to make the Pocket Lining.

13. Sew together (1) 3” x 6” F strip, (1) 2” x 6” E strip, (1) 2” x 6” F strip and (1) 3” x 6” E strip, in that order from left to right, to make (1) Unit 1 strip.

14. Place the Medium Organizer Template on top of the Unit 1 strip, aligning the edge marked “FOLD” with the straight edge of the rectangle. Note: You will not fold this piece. Trace the shape onto the fabric and cut on the drawn lines to make the Pocket Front.

E EF F

Unit 1

16. Layer the F Pocket Lining with the Pocket Front, wrong sides together. Align the raw edges of the G Pocket Binding strip with the straight edges of the two layered pieces.


18. Position the Pocket on top of the D circle with the right side up on both pieces, aligning the raw edges on both pieces. Using a 1/4” seam, sew the two pieces together to make (1) Medium Organizer Unit.

19. Separate the two hoops of the 6” Embroidery Hoop. Place the outer ring on top of the Medium Organizer Unit, centering it. Pick up both the outer ring and the Medium Organizer Unit and place them over the inner ring and push the three layers together to make the Medium Organizer.

20. Flip the hoop over to the back. Fold the fabric raw edges around the inner ring and glue in place using a glue gun to complete the Medium Organizer.

15. Fold (1) 2” x 10” G strip in half, lengthwise and press to make the Pocket Binding.


LARGE ORGANIZER FINISHED SIZE: 10” diameter

FOLD

FOLD

CE

NT

ER

LIN

E2” 2”

Large Organizer Assembly21. Fold the 13” H square in half and then into quarters. Place the Large Organizer Template on top of the folded fabric, aligning the edges marked “FOLD” with the folded edges of the square. Trace the shape onto the fabric and cut on the drawn lines, through the four layers of fabric to cut the Background Circle.

22. Repeat Step 21 with the 13” D square to cut the Pocket Circle.

23. Fold the D circle in half, wrong sides together and press to make the Pocket Unit.

24. Fold (1) 2” x 14” C strip in half, lengthwise and press to make the Pocket Binding.

25. Align the raw edges of the C Pocket Binding strip with the folded edge of the D Pocket Circle.


27. Position the Pocket on top of the H circle with the right side up on both pieces, aligning the raw edges on both pieces. Using a 1/4” seam, sew the two pieces together to make (1) Large Organizer Unit.

28. Measure the organizer across the pocket edge to find the center and crease or draw a line to mark the centerline. Measure out from the centerline 2” to the left and mark a line for the first pocket. Measure out from the centerline 2” to the right and mark a line for the second pocket. Stitch down the pocket lines through all the layers. Note: Do not sew on the centerline.

29. Separate the two hoops of the 10” Embroidery Hoop. Place the outer ring on top of the Large Organizer Unit, centering it. Pick up both the outer ring and the Large Organizer Unit and place them over the inner ring and push the three layers together to make the Large Organizer.

30. Flip the hoop over to the back. Fold the fabric raw edges around the inner ring and glue in place using a glue gun to complete the Large Organizer.


Large Wall OrganizerTemplate

FOLD

FOLD

1” squarefor scale

100% Template

Template


1” squarefor scale

100% Template

Small Wall OrganizerTemplate

FOLDMedium Wall

OrganizerTemplate

FOLD

Template

Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.

Documents

Wall Organizers - WeAllSew