Upload
doliem
View
253
Download
0
Embed Size (px)
Citation preview
Education Services | May 29, 2014 | Intuos Pen And Touch
1
Wacom Intuos Pen and Touch
The Wacom Intuos Pen and Touch allows a user to interact with the computer while roaming the classroom using a combination of pen and multi-touch capabilities.
Contents
Installing the Wireless Kit .................................................................................................... 1
Setting up the Intuos Pen and Touch ................................................................................ 2
Establishing a Wireless Connection .................................................................................. 2
Using the Pen ...................................................................................................................... 3
Using the Pen Buttons (side switch) ................................................................................... 4
Using Touch ......................................................................................................................... 4
Using the Express Keys ....................................................................................................... 4
Wacom Tablet Properties ................................................................................................... 5
Registering your Product .................................................................................................... 5
Installing the Wireless Kit (There is a small quick start guide with the kit. It includes detailed instructions with pictures or use the instructions below.)
1. Open the 2 compartments on the back. 2. Install the battery at an angle, using care
with the battery connections. 3. Install the wireless module. (Lift and remove the plastic placeholder first. Save
this placeholder.) 4. There is a storage compartment for the wireless receiver when not in use. 5. Replace the covers. 6. Charge the battery by connecting the provided cable to a USB port in the
computer. (After charging, store the cable in a safe place.)
2
3 4
Education Services | May 29, 2014 | Intuos Pen And Touch
2
Wacom Intuos Pen and Touch
Setting up the Intuos Pen and Touch
1. Plug the Intuos into the computer using the USB cable. 2. Make sure the computer is connected to the Internet and all other
applications are closed. 3. Load the software that comes with the Intuos Pen and Touch 4. Put the CD in the tray 5. Click “Run Startup.exe” 6. Then click “Install” 7. Follow the on-screen prompts 8. At the end of the install, you must restart your computer. 9. Unplug the USB cable and plug the wireless receiver into a USB port on the
computer. 10. Your Intuos Pen and Touch should be ready to use.
Establishing a Wireless Connection
Education Services | May 29, 2014 | Intuos Pen And Touch
3
Wacom Intuos Pen and Touch
Using the Pen
Positioning- To position the screen cursor, move the pen slightly above the active area without touching the screen surface. Press the pen tip on the screen to make a selection. Clicking- Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click. To double click, press the upper side switch (when set to Double Click), or quickly tap the screen twice in the same place with the pen tip. Dragging- Select an object, then slide the pen tip across the screen to move the object.
Education Services | May 29, 2014 | Intuos Pen And Touch
4
Wacom Intuos Pen and Touch
Using the Pen Buttons (side switch) The pen has a “rocking” switch by the forefinger. The switch can be used whenever the pen is within approximately ½ inch of the tablet active area. It is not necessary to touch the pen tip to the tablet in order to use the switch. The default switch positions are:
• Upper: Double Click. Press to double click. This is easier than tapping twice with the pen.
• Lower: Right Click. Press to right click which brings up menus. The defaults can be changed in the Wacom Tablet Properties (see below).
Using Touch The touch features of your Intuos enables you to control a computer using only your fingertips on the tablet surface. To enable touch, slide the toggle switch on the very top right of the tablet. Use gestures to scroll, zoom, rotate and perform other functions. (See the Standard Gestures tab in the Wacom Tablet Properties below to set defaults.)
Using the Express Keys You can use the Express Keys to:
• Set a key to a commonly used keyboard shortcut • Set a key to launch a commonly used file or application • If you prefer not to use the side switches on the Pen, set a key to right or
double click. • Or choose from any other available function in the software.
Tip: The defaults can be changed in the Wacom Tablet Properties (see below).
Education Services | May 29, 2014 | Intuos Pen And Touch
5
Wacom Intuos Pen and Touch
Wacom Tablet Properties (use to customize pen and tablet)
NOTE: The control panel will not launch unless a supported tablet is connected to the computer. Find the Wacom Tablet Properties in the Start Menu. Click on each tab to explore the settings. Any changes you make will take effect immediately.
Registering your Product The Intuos comes with a free bundle of software. Do not register your product until you are know whether or not you want the free software that comes with the product. While registering your product, you will be given a choice to download 4 pieces of software: Autodesk Sketchbook Express, Adobe Photoshop Elements 11, Nik Color Efex Pro 3 WE6, and ArtRage 3 Studio. This is a one-‐time offer. If you choose not to download these, you will not have the option at a later date. Registering the Intuos Pen and touch will allow you to download the free creative software applications that come with the product and access training. http://download.wacom.com
The defaults for the Express Keys Key 1: Shift Key 2: Alt Key 3: Control Key 4: Windows