Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
This step-by-step programming guide will show you how to get a IntelliSens UVS4041with a fixed rubber valve ready to install on a 2010 Chrysler
300. The same process can be used
to program IntelliSen Universal TPMS Sensors for over 150 million Vehicles In Operation (VIO) today!
VT56 TPMS TOOL UNIVERSAL SENSOR PROGRAMINGA STEP-BY-STEP GUIDE TO PROGRAMING AN INTELLISENS UNIVERSAL TPMS SENSOR
UVS4041
FOR DIRECT ASSITANCE, CALL US!
888 621 8767BH-SENS.COM | INTELLISENS.COM
Select the TPMS sensor manufacturer ‘BH SENS (Huf)’
STEP 3
Locate the vehicle manufacturer, in this case ‘Chrysler’
STEP 5
Select programming option. ‘Create’ a new ID, or ‘Copy’ the old sensor ID
STEP 9
Select the specific vehicle model year you are working on
STEP 7
Wait for the VT56 TPMS Tool to transfer the protocol to the UVSUniversal TPMS Sensor
STEP 11
Choose ‘Sensor’, ‘Make’ shows sensors by Y/M/M
STEP 2
Select ‘Program’, as show in the image of the VT56 TPMS tool to the left
STEP 1
Choose ‘IntelliSens UVS’ for Universal TPMS Sensors
STEP 4
Next, identify thevehicle model, for our example, a ‘300’
STEP 6
Hold the sensor in the programming position, see the image on the bottom right of the page
STEP 10
Identify the UVSsensor, in this case a UVS4041
STEP 8
Once you see the confirmation page the sensor is ready to mount on the rim!
STEP 12