(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 1 07/21/16

VPN with Cisco AnyConnect to Valley Bakers (Published as http://www.valleybakers.com/Employees/VPN_Notes.pdf)

Download the Cisco AnyConnect Secure Mobility Client software as a zip-file from here:

http://www.valleybakers.net/public/anyconnect-win-3.1.05152-pre-deploy-k9.zip

Download it to a folder or desktop on your computer. Then open the zipfile to extract the MSI file to

your folder or desktop. Then open the MSI file to begin the installation procedure.

Or just OPEN or RUN when the options are presented.

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 2 07/21/16

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 3 07/21/16

You may have to authorize the program to run.

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 4 07/21/16

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 5 07/21/16

The Cisco AnyConnect client software is automatically pinned to the Start Menu.

The Cisco AnyConnect Security Mobility Client can also be found on the Start Menu under All Programs.

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 6 07/21/16

The Cisco AnyConnect Security Mobility Client can be placed on the desktop as an easy shortcut icon.

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 7 07/21/16

Use the Cisco AnyConnect Security Mobility Client to connect to or disconnect from the Valley Bakers

VPN. Connect to this address:

vpn.valleybakers.com:8443

Your username is in the form of “valleybakers\UserID”

(Lawrence) VPN with Cisco AnyConnect to Valley Bakers.docx, Page 8 07/21/16

After the VPN is established you can use this software to disconnect from the VPN.

You should disconnect when finished using the VPN connection.