VOLVO SKID STEER LOADERS MC60B, MC70B, MC80B, …

More care. Built in.

MC60B, MC70B, MC80B,MC90B, MC110B

VOLVO SKID STEER LOADERS

Loads of comfortable production.

• Integrated comfortable armrest/seat bar.2

Get a load of the Volvo Skid Steer Loader – and getcomfortable with doing more. Joining Volvo’s compactglobal range, with Compact Wheel Loaders, CompactExcavators and Backhoe Loaders, Volvo Skid SteerLoaders deliver production, serviceability and safety –surrounded in all-day comfort.

The comfortable way to workYou’re going to get more work done in amachine that is comfortable. That’s becauseyou stay alert, fresh and focused. And tomake sure the last hour of your shift is ascomfortable as the first, Volvo Skid SteerLoaders are full of comfort features, insideand out, top to bottom. At the core of theframe, the isolation-mounted cab reducesvibration and noise during operation. Insidethe cab, enjoy spacious ergonomics withplenty of shoulder, hip and legroom to makeany sized operator feel at ease. And forpeace-of-mind, the large top window madefrom durable tempered glass offers clearvisibility above the cab.

You’re in charge. Take the controls.When it comes to controlling machineoperation, you’ve got options. Choosemechanical or pilot controls – dependingon your preference or the job at hand. Theoptional hydraulic pilot controls operatesteering and drive functions with the leftlever and loader functions with the right.Mechanical controls offer a direct feel forthe machine, as each hand controls itsrespective machine side. Comfortablesteering control levers are positionedperfectly to minimize arm movement andreduce fatigue. And depending on the controloption you choose, enjoy greaterconvenience and precision with hand, orhand and foot throttle control.

The seat of comfortWhen you work 8-10 hour shifts, you havean appreciation for comfortable seats.That’s why Volvo gives you a choice of twoseat options to fit operators and jobs of alltypes. Choose from a deluxe high-back seatwith adjustable backrest or a suspensionseat with weight adjustment. It doesn’t stopthere - you also get an ergonomic armrestthat is integrated in the seat bar.

Get a quick gauge on performanceStay on top of your machine’s performanceand maintenance with large, easy-to-readinstruments located directly within your fieldof vision. With no obstruction of view, youget a quick gauge on all the key instruments,including fuel, hour meter, engine coolanttemperature, engine oil pressure, hydraulicoil pressure and engine preheat. It’sproduction, made comfortable.

• Large, durable top window.

• Two comfortable seat options.

• Customizable, low-effort controls.

• Ergonomic comfort mechanicalcontrols.

• Spacious cab – well-placedinstruments.

3

Built to perform. Built to last.

4

Skid steers need to be versatile. And because you putthem through a lot each day, you need durability andperformance you can count on. You found it. Volvo SkidSteer Loaders load it up and move on to the next job –day after day, year after year. It’s what you need. It’s whatyou get.

Outlast the competitionWhen it comes to greater profits, it’s allabout getting more done with less cost andless time. That means Volvo performanceand reliability. Volvo Skid Steer Loaders bringit every day, with the durability you need forthe toughest jobs and the performance tokeep you ahead of the competition.

Peak performance – every dayStay at the top of your performance withthe latest generation of Volvo engines.Perfectly matched, Volvo Skid SteerLoaders feature powerful liquid-cooled, 16-valve Volvo engines. They deliver brutepower – yet are quiet, efficient and meet TierIII environmental standards. And to really getmore done, unleash the power of your high-performance attachments with an optionalhigh-flow system. You get the extra oil flowand hydraulic power you need for easyoperation of profitable attachments.

Volvo protects your investmentConstruction equipment is an investmentand you need maximum availability to stayprofitable. That’s why Volvo keeps youprotected with machines that are there foryou. The lockable, steel rear door protectsthe engine compartment and other keycomponents to reduce damage and risk ofvandalism. And to avoid the dangers oftoday’s jobsites, Volvo Skid Steer Loadersoffer excellent 360° 3D visibility with largetop, rear, side and front openings – to keepyou earning and working safely.

Leave a lasting impressionGet long machine life with a huge dual-element air cleaner that delivers plenty ofclean air to the engine. This enhancesengine life, reduces maintenance andlengthens service intervals. And for long-lasting protection of the frame and arms,dual bolt-on lift-arm stops cushion the lift-arm when lowered all the way down. Thiseliminates noise and provides supportwhen digging or pushing.

Heavy-duty durabilityThe base of Volvo’s durability is the solid,one-piece steel mainframe – welded forstrength and long life – to stand up to dailyabuse. The sealed, heavy-duty cast iron axlehousings feature lubricated-for-life bearings.And to absorb damage, the solid cast-ironrear bumper keeps you protected andimproves resale value. It adds up to lessmaintenance and more uptime.

• Dual element air cleaner enhances life.

• Clean, efficient, powerful Tier III Volvo engine.

• Heavy-duty rear bumper takes the abuse.

5

• One-piece steel mainframe strength.

• Sealed heavy-duty iron axle housings.

• Superior 360° visibility on all sides.

Your access to safe productivity.

6

It’s a Volvo priority to keep you, your jobsite,and ourenvironment safe and protected. It’s important and itmeans you can spend more time on the job and less timeworrying about other things. So for maximum uptime,safety and production – welcome to the Volvo Skid SteerLoader.

Everything in accessWith Volvo, we’re accessible – so you cando the routine maintenance, service theproblem and get back to work. Volvo SkidSteer Loaders are built for maximum uptimeand quick serviceability. All service checksoffer easy access. The cab tilts forward,supported by gas shocks and a safety lock,for complete access. The oil cooler swingsaway from the radiator for easy cleaning.Get at the engine compartment with thewide opening rear door that swings out afull 90° and the flip-up engine access cover.And if you ever need access to the chainsand sprockets, the large removable drivechaincover plate gets you in and out quickly.

Safe and soundStaying on the job – profitably – requires anacute attention to safety. That’s why VolvoSkid Steer Loaders are ROPS/FOPScertified. Raising the seat bar/armrestdisengages hydraulic circuits, locks allcontrols and activates the parking brake toprevent accidental movements. Theretractable seatbelt automatically adjusts tokeep you safely planted in the seat. Whenit’s time to check the coolant expansiontank, enjoy the safety of a translucent, at-a-glance level check. And to reduce the riskof injury, the engine fan guard keeps debrisout and the operator safe.

At your service – on the jobAll machines require service and upkeep.Stay on top of maintenance with a highlyvisible instrument panel that provides visualand audible warnings of critical machinefunctions. One such warning is the air filterrestriction indicator, which visually alerts youwhen service is required. You stay informedand avoid unnecessary maintenance. Forextra protection and convenience, the fuelseparator and filters are mounted next tothe cooling pack, easily accessible throughthe engine door. And for quick inspectionduring routine maintenance, the at-a-glancehydraulic sight gauge and interior, no-toolfuse panel keep you working longer andmore efficiently.

Do not disturbA noisy machine isn’t just a jobsitedisturbance, it can add to operator fatigue.Volvo Skid Steer Loaders cabs are isolationmounted in all four corners of the frame –for reduced vibration and noise. After an8-hour shift, you’ll hear and feel the Volvodifference (and so will those around you).

• Swing-out oil cooler makes cleaning easy.

• Safe and easy cab entry/exit.

• ROPS/FOPS cab tilts for fast access.

7

• Raise the seat bar to lock all controls.

• Safe, comfortable retractable seat belt.

• Easy engine/filters service access.

Get attached to greater profits.

8

For functional solutions that take your productivity in newdirections, the answer is Volvo attachments. With Volvo’suniversal quick-attach, you have the ability to tackle awide range of jobs with speed and ease. Dig, grab,trench, rake and move more on your way to greaterprofits.

The most versatile worker on the siteCompact, yet powerful, Volvo Skid SteerLoaders are one of the most versatilemachines on the jobsite. At the front of it allis the wide range of productive attachments.Sometimes the job calls for hauling earth,cutting trenches or digging postholes.Other times you need to move palletizedmaterial or break concrete. With Volvoattachments, you’re ready for every job –with one machine: your Volvo Skid SteerLoader.

The quick way to goThe Volvo universal quick-attach helps youget more done – faster. By letting you usemost attachments available today, you canmaximize use of your existing attachmentsor those on the jobsite. The flat-face hydrauliccouplers make connections easy andsecure.

A bucket for every occasionBuckets are not one-size-fits-all. That’s whyVolvo offers different bucket options for theideal fit. Each features a heavy-duty skid bar.High carbon bolt-on cutting edges providesuperior edge life and durability. All bucketshave three large steps for easy entry / exitto the machine while avoiding having tostep in the bucket itself. Whether you needa long-lip landscape bucket for good visibilityto the cutting edge and corners, or a short-lip dirt bucket for higher breakout force,Volvo has the bucket size and type to fityour needs. Choose from various dirt, lightmaterial and landscaping buckets. You canalso add some teeth to your job with atoothbar for greater flexibility.

Always on trackWhen terrain conditions get rough, be readywith simple to install over-the-tire steeltracks. Adjustable track tension ensureslong, durable life.

A new breakthroughWith the hydraulic hammer you’ve got theconsistent impact energy you need to breakthrough hard materials. It has simple serviceof tool and seals, and a broad hydraulic flowoperating range for compatibility acrossmachine sizes.

From pallet forks to power rakesOne set of Volvo pallet forks offers handlingfor all the skid steers in your fleet. You getstrength to handle heavy loads and optimumvisibility through the frame and guard. Itdoesn’t end there. Volvo Skid Steer Loadersare compatible with many other attachments,including trenchers, grapple buckets,sweepers, augers, cold planers, pickupbrooms and power rakes. You find the job,we’ll provide the attachment.

• A clean sweep for dust, dirt, debris and snow.

• Trencher cuts through the job with ease.

• Break it up with the hydraulic hammer.

• The road to smooth operation.

9

• Quick change universal attachmentbracket.

• Optional high flow hydraulic for highperformance.

• Quickly change attachments.

SPECIFICATIONS - MC60B, MC70B

10

Engine MC60B MC70BModel Volvo D2.2D VolvoD2D

Cylinders 4 4

Fuel type Diesel Diesel

Displacement 134 in3 (2.2 l) 122 in3 (2 l)

Aspiration Natural Turbocharged

Cooling system Liquid cooled Liquid cooled

Horsepower

SAE Gross 48.8 hp (36.4 kW) 57.2 hp (42.7 kW)

SAE Net 45.4 hp (33.8 kW) 53.9 hp (40.2 kW)

Max. Gross torque 105 ft-lb (142 Nm) @ 1000 rpm 118 ft-lb (160 Nm) @ 2000 rpm

Max no load Speed 3210 rpm 3150 rpm

Rated Speed 3000 rpm 3000 rpm

Electrical systemBattery 12 V - 120 Ah / 660 CCA 12 V - 120 Ah / 660 CCA

Alternator 12 V - 55 A 12 V - 55 A

Starter 12 V - 2.3 kW 12 V - 2.3 kW

DrivetrainAxle torque 3947 lb (5356 Nm) 3947 lb-ft (5356 Nm)

Axle diameter 1.9 in (48.26 mm) 1.9 in (48.26 mm)

Drive chain 80 HV - Heavy series 80 HV - Heavy series

Tires 10.00-16.5, 8-PR 60" 10.00-16.5, 8-PR 66"

Hydraulics system-LoaderStd hydraulic pump output flow @ rated rpm 18.1 US gal/min (68.6 l/min) 19.4 US gal/min (73.4 l/min)

High flow pump output @ rated rpm - 30.3 US gal/min (114.6 l/min)

System pressure 2700 psi (186 bar) 2700 psi (186 bar)

Service capacitiesCooling system 2.2 US gal (8.3 l) 2.2 US gal (8.3 l)

Engine crankcase with filter, change 2.35 US gal (8.95 l) 2.35 US gal (8.95 l)

Hydraulic System - Total capacity 16.4 US gal (62 l) 16.4 US gal (62 l)

Hydraulic Reservoir Capacity 14.8 US gal (56 l) 14.8 US gal (56 l)

Fuel tank data 16.4 US gal (62 l) 16.4 US gal (62 l)

PerformanceRated operating capacity (SAE) 1400 lb (670 kg) 1500 lb (681 kg)

Tipping capacity (SAE) 2900 lb (1315 kg) 3000 lb (1361 kg)

Operating weight 5710 lb (2590 kg) 5803 lb (2632 kg)

Maximim travel speed 7.3 mph (11.7 km/h) 7.9 mph (12.7 km/h)

Breakout force, lift 2900 lbf (1290 daN) 3370 lbf (1499 daN)

Breakout force, curl 3840 lbf (1708 daN) 4070 lbf (1810 daN)

Cycle time:

Raise (Lifting) 2.7 seconds 2.5 seconds

Lower (Power down) 1.6 seconds 1.5 seconds

Dump (Tilt forward) 1.8 seconds 1.5 seconds

Curl (Tilt back) 1.6 seconds 1.4 seconds

Specifications are in accordance with SAE and ISO recommended practice. They are provided for machines with dirt bucket and tires specifiedin the drivetrain section of the data sheet. Rated operating capacity (SAEJ818) is equal to no more than 50% of tipping capacity.

11

A Overall operating heightB Height to hinge pinC Dump heightD Dump angleE Dump reachF Roll back angleG Ground clearanceH WheelbaseI Overall length (L/bucket)

J Overall length (W/bucket)K Angle of departureL Overall heightM Bucket widthN Over tire width (L/bucket) O Tread widthP Turning radius rearQ Turning radius front L/bucketR Turning radius front W/bucket

MC60B

Model

MC70B

A B C D E F G H I

146.6" 112.4" 85.7" 39.5° 23.5" 25° 6.8" 41.2" 95.9" (3722 mm) (2856 mm) (2177 mm) (598 mm) (172 mm) (1046 mm) (2435 mm)

146.6" 112.4" 85.7" 39.5° 23.5" 25° 6.8" 41.2" 95.9" (3722 mm) (2856 mm) (2177 mm) (598 mm) (172 mm) (1046 mm) (2435 mm)

MC60B

Model

MC70B

J K L M N O P Q R

129.6" 26° 77.1" 68.0" 59.8" 49.1" 63.4" 49.5" 76.9"(3291 mm) (1958 mm) (1727 mm) (1518 mm) (1247 mm) (1610 mm) (1257 mm) (1954 mm)

129.6" 26° 77.1" 68.0" 65.3" 54.6" 63.4" 49.5" 76.9"(3291 mm) (1958 mm) (1727 mm) (1658 mm) (1386 mm) (1610 mm) (1257 mm) (1954 mm)

Data withpallet fork(ISO 14397)

Center of gravity

Tipping load

MC60B MC70B

Data withpallet fork(ISO 14397)

Center of gravity

Rated Operating Capacity

MC60B MC70B

1022 lbs 1064 lbs(464 kg) (483 kg)

936 lbs 1008 lbs(424 kg) (457 kg)

42"(1067 mm)

48"(1219 mm)

42"(1067 mm)

48"(1219 mm)

2044 lbs 2127 lbs(927 kg) (965 kg)

1871 lbs 2016 lbs(849 kg) (915 kg)

DataAccording toBucket Type

Bucket

Width Weight SAEHeaped cap

SAE Struck cap

Dirt BucketW/bolt-on edge

Dirt BucketW/bolt-on

Adapters/teeth

Landscape BucketW/bolt-on edge

Landscape BucketW/bolt-on

Adapters/teeth



Adapters/teeth



Adapters/teeth



Adapters/teeth



Adapters/teeth

62" 464 lbs 13.09 ft3 9.2 ft3

(1575 mm) (210.6 kg) (0.37 m3) (0.26 m3)

62" 441 lbs 12.54 ft3 9.05 ft3

(1575 mm) (200.2 kg) (0.36 m3) (0.26 m3)

62" 482 lbs 14.6 ft3 10.27 ft3

(1575 mm) (218.6 kg) (0.41 m3) (0.29 m3)

62" 459 lbs 14.05 ft3 10.12 ft3

(1575 mm) (208.2 kg) (0.40 m3) (0.29 m3)

68" 495 lbs 14.5 ft3 10.12 ft3

(1727 mm) (224.6 kg) (0.41 m3) (0.29 m3)

68" 473 lbs 14 ft3 9.9 ft3

(1727 mm) (214.3 kg) (0.4 m3) (0.28 m3)

68" 512 lbs 16.16 ft3 10.31 ft3

(1727 mm) (232.3 kg) (0.46 m3) (0.32 m3)

68" 490 lbs 15.65 ft3 11.14 ft3

(1727 mm) (222 kg) (0.44 m3) (0.32 m3)

74" 538 lbs 16.71 ft3 11.8 ft3

(1880 mm) (244.2 kg) (0.47 m3) (0.33 m3)

74" 510 lbs 16.1 ft3 11.55 ft3

(1880 mm) (231.4 kg) (0.46 m3) (0.33 m3)

74" 562 lbs 19 ft3 13.3 ft3(1880 mm) (254.9 kg) (0.54 m3) (0.38 m3)

74" 534 lbs 18.42 ft3 13.11 ft3

(1880 mm) (242.1 kg) (0.52 m3) (0.37 m3)

MC60BMC70B

MC70B

12

SPECIFICATIONS - MC80B, MC90B, MC110BEngine MC80B MC90B MC110BModel Volvo D3.4D Volvo D3.4D Volvo D3.4D

Cylinders 4 4 4

Fuel type Diesel Diesel Diesel

Displacement 202 in3 (3.3 l) 202 in3 (3.3 l) 202 in3 (3.3 l)

Aspiration Natural Turbocharged Turbocharged

Cooling system Liquid cooled Liquid cooled Liquid cooled

Horsepower

SAE Gross 69.8 hp (52.1 kW) 85.6 hp (63.9 kW) 85.6 hp (63.9 kW)

SAE Net 67.7 hp (50.5 kW) 83.5 hp (62.3 kW) 83.5 hp (62.3 kW)

Max. Gross torque 172 ft-lb (234 Nm) @ 1200 rpm 213 ft-lb (289 Nm) @ 1850 rpm 213 ft-lb (289 Nm) @ 1850 rpm

Max no load Speed 2650 rpm 2650 rpm 2650 rpm

Rated Speed 2500 rpm 2500 rpm 2500 rpm

Electrical systemBattery 12 V - 120 Ah / 660 CCA 12 V - 120 Ah / 660 CCA 12 V - 120 Ah / 660 CCA

Alternator 12 V - 55 A 12 V - 55 A 12 V - 55 A

Starter 12 V - 3 kW 12 V - 3 kW 12 V - 3 kW

DrivetrainAxle torque 3947 lb-ft (5356 Nm) 3947 lb-ft (5356 Nm) 4808 lb-ft (6524 Nm)

Axle diameter 1.9 in (48 mm) 1.9 in (48 mm) 2.4 in (61 mm)

Drive chain 80 HV - Heavy series 80 HV - Heavy series 100 HV - Heavy series

Tires 12.00-16.5, 10-PR 12.00-16.5, 12-PR 12.00-16.5, 12-PR

Hydraulics system-LoaderStd hydraulic pump output flow @ rated rpm 21.4 US gal/min (81 l/min) 21.4 US gal/min (81 l/min) 21.4 US gal/min (81 l/min)

High flow pump output @ rated rpm - 28.5 US gal/min (108 lpm) 28.5 US gal/min (108 lpm)

System pressure 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar)

Service capacitiesCooling system 3.7 US gal (14 l) 3.7 US gal (14 l) 3.7 US gal (14 l)

Engine crankcase with filter, change 2.9 US gal (10.95 l) 2.9 US gal (10.95 l) 2.9 US gal (10.95 l)

Fuel tank 20.6 US gal (78 l) 20.6 US gal (78 l) 24.5 US gal (93 l)

Hydraulic System - Total capacity 22.9 US gal (87 l) 22.9 US gal (87 l) 25.4 US gal (96 l)

Hydraulic Reservoir Capacity 18.7 US gal (71 l) 18.7 US gal (71 l) 21.9 US gal (83 l)

PerformanceRated operating capacity (SAE) 1850 lb (839 kg) 2000 lb (907 kg) 2400 lb (1088 kg)

Tipping capacity (SAE) 4000 lb (1814 kg) 4030 lb (1828 kg) 4800 lb (2177 kg)

Operating weight (SAE) 6826 lb (3096 kg) 6986 lb (3169 kg) 7491 lbs (3398 kg)

Maximum travel speed 7.1 mph (11.4 km/h) 7.1 mph (11.4 km/h) 7.1 mph (11.4 km/h)

Breakout force, lift 3970 lbf (1766 daN) 4120 lbf (1833 daN) 5880 lbf (2615 daN)

Breakout force, curl 5400 lbf (2402 daN) 5400 lbf (2402 daN) 5575 lbf (2480 daN)

Cycle time:

Raise (Lifting) 2.9 seconds 2.9 seconds 3.5 seconds

Lower (Power down) 1.5 seconds 1.5 seconds 2.1 seconds

Dump (Tilt forward) 2.1 seconds 2.1 seconds 2.3 seconds

Curl (Tilt back) 1.5 seconds 1.5 seconds 1.8 seconds

Specifications are in accordance with SAE and ISO recommended practice. They are provided for machines with dirt bucket and tires specifiedin the drivetrain section of the data sheet. Rated operating capacity (SAEJ818) is equal to no more than 50% of tipping capacity.

13

13

A Overall operating heightB Height to hinge pinC Dump heightD Dump angleE Dump reachF Roll back angleG Ground clearanceH WheelbaseI Overall length (L/bucket)

J Overall length (W/bucket)K Angle of departureL Overall heightM Bucket widthN Over tire width (L/bucket) O Tread widthP Turning radius rearQ Turning radius front L/bucketR Turning radius front W/bucket

DataAccording toBucket Type

Bucket

Width Weight SAEHeaped cap

SAE Struck cap

Dirt Bucketw/bolt-on edge


Adapters/teeth

Landscape Bucketw/bolt-on edge


Adapters/teeth

Dirt Bucketw/bolt-on edge


Adapters/teeth

Landscape Bucketw/bolt-on edge


Adapters/teeth

MC80BMC90B

MC110B

MC80B

Model

MC90B

MC110B

A B C D E F G H I

156.4" 119.7" 90.2" 40° 21.9" 29° 7.7" 44.3" 101.8"(3972 mm) (3039 mm) (2290 mm) (555 mm) (195 mm) (1124 mm) (2585 mm)

156.6" 119.9" 90.4" 40° 21.9" 29° 8.0" 44.3" 101.8"(3979 mm) (3046 mm) (2297 mm) (555 mm) (202 mm) (1124 mm) (2585 mm)

156.4" 119.7" 90.3" 40° 21.7" 29° 7.7" 48.8" 103.6"(3973 mm) (3041 mm) (2293 mm) (550 mm) (196 mm) (1240 mm) (2632 mm)

MC80B

Model

MC90B

MC110B

J K L M N O P Q R

137.8" 28° 79.9" 74" 72.3" 59.7" 66.3" 54.1" 82.9"(3499 mm) (2028 mm) (1880 mm) (1838 mm) (1517 mm) (1464 mm) (1375 mm) (2104 mm)



Data with palletfork(ISO 14397)

Center of gravity

42"(1067 mm)

48"(1219 mm)

Tipping load

MC80B MC90B MC110B

2593 lbs 3017 lbs 3525 lbs(1176 kg) (1369 kg) (1599 kg)


Data with palletfork(ISO 14397)

Centerof gravity

42"(1067 mm)

48"(1219 mm)

Rated Operating Capacity

MC80B MC90B MC110B



74" 538 lbs 16.71 ft3 11.8 ft3

(1880 mm) (244.2 kg) (0.47 m3) (0.33 m3)

74" 510 lbs 16.1 ft3 11.55 ft3

(1880 mm) (231.4 kg) (0.46 m3) (0.33 m3)

74" 562 lbs 19 ft3 13.3 ft3

(1880 mm) (254.9 kg) (0.54 m3) (0.38 m3)

74" 534 lbs 18.42 ft3 13.11 ft3

(1880 mm) (242.1 kg) (0.52 m3) (0.37 m3)

82" 581 lbs 18.66 ft3 13.11 ft3

(2083 mm) (263.4 kg) (0.53 m3) (0.37 m3)

82" 551 lbs 18.01 ft3 12.86 ft3

(2083 mm) (249.7 kg) (0.51 m3) (0.36 m3)

82" 606 lbs 21.24 ft3 14.78 ft3

(2083 mm) (274.9 kg) (0.60 m3) (0.42 m3)

82" 576 lbs 20.58 ft3 14.53 ft3

(2083 mm) (261.2 kg) (0.58 m3) (0.41 m3)

MC60B, MC70B, MC80B, MC90B, MC110BWarning lights:Air filter restriction, alternator output, seatbelt use, hydraulic filter restriction, hydraulicoil temperature, battery chargeWarning lights with audible alarm:Engine coolant temperature, engine oilpressure and hydraulic oil temperature

TransmissionTwo variable displacement piston pumpsmounted in tandemTwo fixed displacement high torque motors

HydraulicsLift-arm mounted auxiliary hydraulics withstandard flat face couplers (ISO 16028)5 micron hydraulic oil filter mounted in tank

SafetyLift-arm support strutElectric lift and tilt hydraulic lockoutsBack-up alarmAutomatic parking brakeEmergency exit rear windowHornRear and top door props

CabTop windowRear window/secondary escape.Deluxe, high-back, super-comfort seat withfore-aft adjustment and seatback angleadjustment.2" retractable seat beltOperator seat barDual travel/steering leversDual, adjustable-angle foot pedalsTilt forward ROPS/FOPS cab12-Volt power accessory outlet

OtherLockable rear door and engine coverQuick-Attach mounting frameLockable fuel cap

OPTIONAL EQUIPMENT

CabAdjustable suspension seatCab enclosure with side windows,heater/blower, front door withwasher/wiperCab enclosure with side windows,heater/blower, air-conditioning, front doorwith washer/wiperSpecial applications kit with polycarbonatefront door5-button attachment control w/Harness &14-pin connector plug3" retractable seat belt.3-point seat belt (3" lap with 2" shoulder) 4-Point lift kit

ControlsElectro-proportional auxiliary hydrauliccontrolPilot-operated joystick controls

EngineEngine block heaterEngine auto-idling

HydraulicsHydraulic reservoir heaterHigh flow hydraulicsHydraulic self level (lift only)

ElectricalRotating beacon light Rear work lightsAnti-theft function

TiresStandard duty lug tiresHeavy-duty lug TiresOver-the-tire steel tracks

STANDARD EQUIPMENT

EngineVolvo brand, 4-cylinder, liquid-cooled,16-valve, direct-injection diesel enginesMeet US EPA Tier III standardsSelf-cleaning, dual-element, air cleanerDual element dry air cleanerRemote-mount fuel filterRemote-mount water separatorRemote-mount electric fuel pump12-Volt heavy-duty starterAlternator with internal regulatorQuick cycle engine preheatEngine oil remote drain hoseHigh-capacity radiatorAnti-freeze protection to -35 degrees FSeparate, tilt-out hydraulic oil cooler

ElectricalHeavy-duty, maintenance-free batteryEngine start/stop key switchFuel gaugeCoolant temperature gaugeHour meterTwo front 50-Watt work lightsMaster electrical shut-off switchIn-cab fuse panel accessible without toolsSealed electrical connectors meet IP65water ingress standard

14

15

Volvo Construction Equipment is different. It’s designed, built

and supported in a different way. That difference comes from

an engineering heritage of over 170 years. A heritage of

thinking first about the people who actually use the machines.

About how to help them be safer, more comfortable, more

productive. About the environment we all share. The result of

that thinking is a growing range of machines and a global

support network dedicated to helping you do more. People

around the world are proud to use Volvo. And we’re proud of

what makes Volvo different - More care. Built in.

Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to changespecifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.

Ref. No. 22 2 000 9901 EnglishPrinted in USA 06/09 USAVolvo, AshevilleCopyright © 2009 Volvo

Documents

VOLVO SKID STEER LOADERS MC60B, MC70B, MC80B, …